Muzzle device
SureFire SOCOM 4-Prong Flash Hider
The four-tine flash hider SureFire's SOCOM suppressors were first made to lock onto: four tines between slots cut to one side of the bore, a two-groove labyrinth seal, wrench flats, and a flange with the indexing tab.

- Weight
- 3.9 oz Confirmedpublished: SureFire, SOCOM 4-Prong Flash Hider (the product's page; its Key Attributes), the maker, read Oct 6, 2026
- Lowest price
- $179.00 at Primary Arms, read Nov 21, 2026
- Made for
- .223 Caliber (5.56mm) + 1/2-28 Thread Pitch
- Maker's number
- FH556RC-1/2-28
- Colour
- SureFire DLC black
- Drawn as
- modelled
- Maker's page
- surefire.com
In “Aero 5.56 carbine”, a build on the start page, in place of its Mil-spec A2 flash hider, 1/2-28 (drawing 9349051).
Its figures
Every figure the site draws and checks it by, with where it came from. Open one for each source's reading, and why one is used where they differ.
Overall length (rear face to the tines' front)2.6 in ± 0.05 in 66 mmConflictPublished: SureFire, SOCOM 4-Prong Flash Hider (the product's page; its Key Attributes), the maker, read Oct 6, 2026
Published “LENGTH 2.6 in (6.4 cm)” used
SureFire, SOCOM 4-Prong Flash Hider (the product's page; its Key Attributes), the maker, read Oct 6, 2026 the page, harvested Oct 6, 2026
One figure for the page, which sells two models (5.56 mm 1/2-28 and 7.62 mm 5/8-24).
Published “Length 2.67" (the table's column "SureFire 4-Prong")”
T.REX ARMS, SureFire SOCOM Flash Hider (one page for the 3-Prong, the Closed Tine and the 4-Prong), a seller, read Oct 6, 2026 the page, harvested Oct 6, 2026
The maker's own page, in inches. The seller's 2.67 is 2.7% more and doesn't say where it is from; the model is scaled by this one.
surefire and trex differ by 0.07 in beyond what each states it is good to.
The maker's two figures don't agree with each other: 6.4 cm is 2.52 in. A seller says 2.67.
Shims between the barrel's shoulder and the device's rear face, as installed0.018 in ± 0.018 in 0.5 mmProvisionalWorked out: Between no shim and one pitch of the 1/2-28 thread (1/28 in), from the shim chart for 28 threads per inch in SureFire's adapter manual 71-01-997 Rev E (the copy T.REX ARMS hosts, a copy on file): the midpoint, ± half the range.
Worked out 0.018 in ± 0.018 in used
Between no shim and one pitch of the 1/2-28 thread (1/28 in), from the shim chart for 28 threads per inch in SureFire's adapter manual 71-01-997 Rev E (the copy T.REX ARMS hosts, a copy on file): the midpoint, ± half the range., harvested
SureFire's adapters are timed with shims: the manual on file (71-01-997 Rev E, which names the flash hider adapters; this model's own, 71-01-828, wasn't to be had) has a kit of ".001", ".005", ".020" shims worth "1/36 Turn", "1/7 Turn", "2/3 Turn" on 28 threads per inch. A whole turn is one pitch, .036: the value is the middle of that and the ± all of it.
Length ahead of the barrel's shoulder, installed (to the front face; the shims' thickness included)2.618 in ± 0.053 in 66.5 mmProvisionalWorked out: {.shim_stack} + {.overall_length}
Worked out 2.618 in used
{.shim_stack} + {.overall_length}, harvested
The shims against the shoulder, the device against the shims.
Largest outside diameter (the flange at the rear)0.945 in ± 0.03 in 24 mmProvisionalPhoto: Primary Arms' gallery, FH556RC-1-2-28_02: the device standing, seen square along one of its slots, on white, 2200 x 1467
Photo 0.945 in ± 0.03 in used
Primary Arms' gallery, FH556RC-1-2-28_02: the device standing, seen square along one of its slots, on white, 2200 x 1467, harvested
Scale: its own length in the photo, 1276 px (rows 96 to 1371), as overall_length (2.6): 490.8 px/in. Read by the silhouette's width row by row at a level of 200 of 255, each section where the width holds within two pixels; widths as read (a dark round reads up to 3% thin on white: not corrected), positions from the rear end's row; the slot's walls, the flat's ends and the slot's end picked by eye on a crop (± 5 px, ± 0.01 in)
464 px, 0.0745 to 0.116 of the length from the rear.
Rear boss (the short journal behind the flange), diameter0.674 in ± 0.02 in 17.1 mmProvisionalPhoto: Primary Arms' gallery, FH556RC-1-2-28_02: the device standing, seen square along one of its slots, on white, 2200 x 1467
Photo 0.674 in ± 0.02 in used
Primary Arms' gallery, FH556RC-1-2-28_02: the device standing, seen square along one of its slots, on white, 2200 x 1467, harvested
Scale: its own length in the photo, 1276 px (rows 96 to 1371), as overall_length (2.6): 490.8 px/in. Read by the silhouette's width row by row at a level of 200 of 255, each section where the width holds within two pixels; widths as read (a dark round reads up to 3% thin on white: not corrected), positions from the rear end's row; the slot's walls, the flat's ends and the slot's end picked by eye on a crop (± 5 px, ± 0.01 in)
331 px.
Rear boss, length (rear face to the flange's rear face)0.168 in ± 0.01 in 4.3 mmProvisionalPhoto: Primary Arms' gallery, FH556RC-1-2-28_02: the device standing, seen square along one of its slots, on white, 2200 x 1467
Photo 0.168 in ± 0.01 in used
Primary Arms' gallery, FH556RC-1-2-28_02: the device standing, seen square along one of its slots, on white, 2200 x 1467, harvested
Scale: its own length in the photo, 1276 px (rows 96 to 1371), as overall_length (2.6): 490.8 px/in. Read by the silhouette's width row by row at a level of 200 of 255, each section where the width holds within two pixels; widths as read (a dark round reads up to 3% thin on white: not corrected), positions from the rear end's row; the slot's walls, the flat's ends and the slot's end picked by eye on a crop (± 5 px, ± 0.01 in)
The boss holds its width to 0.0635 of the length; the flange's rounded rear corner begins the next row.
Flange, length (its rear face to where its front cone begins)0.135 in ± 0.012 in 3.4 mmProvisionalPhoto: Primary Arms' gallery, FH556RC-1-2-28_02: the device standing, seen square along one of its slots, on white, 2200 x 1467
Photo 0.135 in ± 0.012 in used
Primary Arms' gallery, FH556RC-1-2-28_02: the device standing, seen square along one of its slots, on white, 2200 x 1467, harvested
Scale: its own length in the photo, 1276 px (rows 96 to 1371), as overall_length (2.6): 490.8 px/in. Read by the silhouette's width row by row at a level of 200 of 255, each section where the width holds within two pixels; widths as read (a dark round reads up to 3% thin on white: not corrected), positions from the rear end's row; the slot's walls, the flat's ends and the slot's end picked by eye on a crop (± 5 px, ± 0.01 in)
To 0.1165 of the length from the rear.
Cone ahead of the flange (from the flange's diameter down to the collar's), length0.06 in ± 0.012 in 1.5 mmProvisionalPhoto: Primary Arms' gallery, FH556RC-1-2-28_02: the device standing, seen square along one of its slots, on white, 2200 x 1467
Photo 0.06 in ± 0.012 in used
Primary Arms' gallery, FH556RC-1-2-28_02: the device standing, seen square along one of its slots, on white, 2200 x 1467, harvested
Scale: its own length in the photo, 1276 px (rows 96 to 1371), as overall_length (2.6): 490.8 px/in. Read by the silhouette's width row by row at a level of 200 of 255, each section where the width holds within two pixels; widths as read (a dark round reads up to 3% thin on white: not corrected), positions from the rear end's row; the slot's walls, the flat's ends and the slot's end picked by eye on a crop (± 5 px, ± 0.01 in)
To 0.1395 of the length: it ends 0.363 from the rear face.
Collar (the section the flats are cut in, and the lands either side of the two grooves), diameter0.862 in ± 0.03 in 21.9 mmProvisionalPhoto: Primary Arms' gallery, FH556RC-1-2-28_02: the device standing, seen square along one of its slots, on white, 2200 x 1467
Photo 0.862 in ± 0.03 in used
Primary Arms' gallery, FH556RC-1-2-28_02: the device standing, seen square along one of its slots, on white, 2200 x 1467, harvested
Scale: its own length in the photo, 1276 px (rows 96 to 1371), as overall_length (2.6): 490.8 px/in. Read by the silhouette's width row by row at a level of 200 of 255, each section where the width holds within two pixels; widths as read (a dark round reads up to 3% thin on white: not corrected), positions from the rear end's row; the slot's walls, the flat's ends and the slot's end picked by eye on a crop (± 5 px, ± 0.01 in)
423 px, 0.1395 to 0.3025 of the length, and on the lands.
Wrench flats2ProvisionalPublished: T.REX ARMS, SureFire SOCOM Flash Hider (one page for the 3-Prong, the Closed Tine and the 4-Prong), a seller, read Oct 6, 2026
Published “Wrench Flats Yes (the table's column "SureFire 4-Prong"); taken as a pair” used
T.REX ARMS, SureFire SOCOM Flash Hider (one page for the 3-Prong, the Closed Tine and the 4-Prong), a seller, read Oct 6, 2026 the page, harvested Oct 6, 2026
One shows, at the left edge of the straight view, turned 45° from the lens; the other is taken to be opposite it.
Wrench flats, across0.8 in ± 0.04 in 20.3 mmProvisionalPhoto: Primary Arms' gallery, FH556RC-1-2-28_02: the device standing, seen square along one of its slots, on white, 2200 x 1467
Photo 0.8 in ± 0.04 in used
Primary Arms' gallery, FH556RC-1-2-28_02: the device standing, seen square along one of its slots, on white, 2200 x 1467, harvested
Scale: its own length in the photo, 1276 px (rows 96 to 1371), as overall_length (2.6): 490.8 px/in. Read by the silhouette's width row by row at a level of 200 of 255, each section where the width holds within two pixels; widths as read (a dark round reads up to 3% thin on white: not corrected), positions from the rear end's row; the slot's walls, the flat's ends and the slot's end picked by eye on a crop (± 5 px, ± 0.01 in)
From one flat seen 45° off: its inner edge is 0.4 of the collar's radius from the middle of the view, which a flat this far from the axis gives. Rough.
Wrench flats, rear end (from the rear face)0.457 in ± 0.015 in 11.6 mmProvisionalPhoto: Primary Arms' gallery, FH556RC-1-2-28_02: the device standing, seen square along one of its slots, on white, 2200 x 1467
Photo 0.457 in ± 0.015 in used
Primary Arms' gallery, FH556RC-1-2-28_02: the device standing, seen square along one of its slots, on white, 2200 x 1467, harvested
Scale: its own length in the photo, 1276 px (rows 96 to 1371), as overall_length (2.6): 490.8 px/in. Read by the silhouette's width row by row at a level of 200 of 255, each section where the width holds within two pixels; widths as read (a dark round reads up to 3% thin on white: not corrected), positions from the rear end's row; the slot's walls, the flat's ends and the slot's end picked by eye on a crop (± 5 px, ± 0.01 in)
0.1757 of the length, by eye on the crop.
Wrench flats, length along the device0.295 in ± 0.02 in 7.5 mmProvisionalPhoto: Primary Arms' gallery, FH556RC-1-2-28_02: the device standing, seen square along one of its slots, on white, 2200 x 1467
Photo 0.295 in ± 0.02 in used
Primary Arms' gallery, FH556RC-1-2-28_02: the device standing, seen square along one of its slots, on white, 2200 x 1467, harvested
Scale: its own length in the photo, 1276 px (rows 96 to 1371), as overall_length (2.6): 490.8 px/in. Read by the silhouette's width row by row at a level of 200 of 255, each section where the width holds within two pixels; widths as read (a dark round reads up to 3% thin on white: not corrected), positions from the rear end's row; the slot's walls, the flat's ends and the slot's end picked by eye on a crop (± 5 px, ± 0.01 in)
To 0.2894 of the length, by eye on the crop.
Grooves of the labyrinth seal2ProvisionalPhoto: Primary Arms' gallery, FH556RC-1-2-28_02: the device standing, seen square along one of its slots, on white, 2200 x 1467
Photo 2 count used
Primary Arms' gallery, FH556RC-1-2-28_02: the device standing, seen square along one of its slots, on white, 2200 x 1467, harvested
Scale: its own length in the photo, 1276 px (rows 96 to 1371), as overall_length (2.6): 490.8 px/in. Read by the silhouette's width row by row at a level of 200 of 255, each section where the width holds within two pixels; widths as read (a dark round reads up to 3% thin on white: not corrected), positions from the rear end's row; the slot's walls, the flat's ends and the slot's end picked by eye on a crop (± 5 px, ± 0.01 in)
Two grooves ahead of the collar, in the straight view and both three-quarter views.
First groove's rear wall (from the rear face)0.79 in ± 0.012 in 20.1 mmProvisionalPhoto: Primary Arms' gallery, FH556RC-1-2-28_02: the device standing, seen square along one of its slots, on white, 2200 x 1467
Photo 0.79 in ± 0.012 in used
Primary Arms' gallery, FH556RC-1-2-28_02: the device standing, seen square along one of its slots, on white, 2200 x 1467, harvested
Scale: its own length in the photo, 1276 px (rows 96 to 1371), as overall_length (2.6): 490.8 px/in. Read by the silhouette's width row by row at a level of 200 of 255, each section where the width holds within two pixels; widths as read (a dark round reads up to 3% thin on white: not corrected), positions from the rear end's row; the slot's walls, the flat's ends and the slot's end picked by eye on a crop (± 5 px, ± 0.01 in)
0.304 of the length.
Grooves, width0.04 in ± 0.008 in 1 mmProvisionalPhoto: Primary Arms' gallery, FH556RC-1-2-28_02: the device standing, seen square along one of its slots, on white, 2200 x 1467
Photo 0.04 in ± 0.008 in used
Primary Arms' gallery, FH556RC-1-2-28_02: the device standing, seen square along one of its slots, on white, 2200 x 1467, harvested
Scale: its own length in the photo, 1276 px (rows 96 to 1371), as overall_length (2.6): 490.8 px/in. Read by the silhouette's width row by row at a level of 200 of 255, each section where the width holds within two pixels; widths as read (a dark round reads up to 3% thin on white: not corrected), positions from the rear end's row; the slot's walls, the flat's ends and the slot's end picked by eye on a crop (± 5 px, ± 0.01 in)
0.0155 of the length, with their rounded edges.
Grooves, from one's rear wall to the next's0.08 in ± 0.008 in 2 mmProvisionalPhoto: Primary Arms' gallery, FH556RC-1-2-28_02: the device standing, seen square along one of its slots, on white, 2200 x 1467
Photo 0.08 in ± 0.008 in used
Primary Arms' gallery, FH556RC-1-2-28_02: the device standing, seen square along one of its slots, on white, 2200 x 1467, harvested
Scale: its own length in the photo, 1276 px (rows 96 to 1371), as overall_length (2.6): 490.8 px/in. Read by the silhouette's width row by row at a level of 200 of 255, each section where the width holds within two pixels; widths as read (a dark round reads up to 3% thin on white: not corrected), positions from the rear end's row; the slot's walls, the flat's ends and the slot's end picked by eye on a crop (± 5 px, ± 0.01 in)
0.0306 of the length.
Grooves, diameter at their bottoms0.814 in ± 0.03 in 20.7 mmProvisionalPhoto: Primary Arms' gallery, FH556RC-1-2-28_02: the device standing, seen square along one of its slots, on white, 2200 x 1467
Photo 0.814 in ± 0.03 in used
Primary Arms' gallery, FH556RC-1-2-28_02: the device standing, seen square along one of its slots, on white, 2200 x 1467, harvested
Scale: its own length in the photo, 1276 px (rows 96 to 1371), as overall_length (2.6): 490.8 px/in. Read by the silhouette's width row by row at a level of 200 of 255, each section where the width holds within two pixels; widths as read (a dark round reads up to 3% thin on white: not corrected), positions from the rear end's row; the slot's walls, the flat's ends and the slot's end picked by eye on a crop (± 5 px, ± 0.01 in)
399 to 400 px.
Front of the last land, where the body begins (from the rear face)0.962 in ± 0.012 in 24.4 mmProvisionalPhoto: Primary Arms' gallery, FH556RC-1-2-28_02: the device standing, seen square along one of its slots, on white, 2200 x 1467
Photo 0.962 in ± 0.012 in used
Primary Arms' gallery, FH556RC-1-2-28_02: the device standing, seen square along one of its slots, on white, 2200 x 1467, harvested
Scale: its own length in the photo, 1276 px (rows 96 to 1371), as overall_length (2.6): 490.8 px/in. Read by the silhouette's width row by row at a level of 200 of 255, each section where the width holds within two pixels; widths as read (a dark round reads up to 3% thin on white: not corrected), positions from the rear end's row; the slot's walls, the flat's ends and the slot's end picked by eye on a crop (± 5 px, ± 0.01 in)
0.370 of the length.
Body ahead of the seal, diameter (the cylinder the tines begin in)0.844 in ± 0.03 in 21.4 mmProvisionalPhoto: Primary Arms' gallery, FH556RC-1-2-28_02: the device standing, seen square along one of its slots, on white, 2200 x 1467
Photo 0.844 in ± 0.03 in used
Primary Arms' gallery, FH556RC-1-2-28_02: the device standing, seen square along one of its slots, on white, 2200 x 1467, harvested
Scale: its own length in the photo, 1276 px (rows 96 to 1371), as overall_length (2.6): 490.8 px/in. Read by the silhouette's width row by row at a level of 200 of 255, each section where the width holds within two pixels; widths as read (a dark round reads up to 3% thin on white: not corrected), positions from the rear end's row; the slot's walls, the flat's ends and the slot's end picked by eye on a crop (± 5 px, ± 0.01 in)
414 px, 0.373 to 0.5666 of the length.
Where the body begins to narrow (from the rear face)1.473 in ± 0.03 in 37.4 mmProvisionalPhoto: Primary Arms' gallery, FH556RC-1-2-28_02: the device standing, seen square along one of its slots, on white, 2200 x 1467
Photo 1.473 in ± 0.03 in used
Primary Arms' gallery, FH556RC-1-2-28_02: the device standing, seen square along one of its slots, on white, 2200 x 1467, harvested
Scale: its own length in the photo, 1276 px (rows 96 to 1371), as overall_length (2.6): 490.8 px/in. Read by the silhouette's width row by row at a level of 200 of 255, each section where the width holds within two pixels; widths as read (a dark round reads up to 3% thin on white: not corrected), positions from the rear end's row; the slot's walls, the flat's ends and the slot's end picked by eye on a crop (± 5 px, ± 0.01 in)
0.5666 of the length.
Step down ahead of the taper (from the rear face)1.999 in ± 0.03 in 50.8 mmProvisionalPhoto: Primary Arms' gallery, FH556RC-1-2-28_02: the device standing, seen square along one of its slots, on white, 2200 x 1467
Photo 1.999 in ± 0.03 in used
Primary Arms' gallery, FH556RC-1-2-28_02: the device standing, seen square along one of its slots, on white, 2200 x 1467, harvested
Scale: its own length in the photo, 1276 px (rows 96 to 1371), as overall_length (2.6): 490.8 px/in. Read by the silhouette's width row by row at a level of 200 of 255, each section where the width holds within two pixels; widths as read (a dark round reads up to 3% thin on white: not corrected), positions from the rear end's row; the slot's walls, the flat's ends and the slot's end picked by eye on a crop (± 5 px, ± 0.01 in)
0.7688 of the length, where the photo shows the line across the tines.
Diameter just behind that step (the taper's small end)0.825 in ± 0.03 in 21 mmProvisionalPhoto: Primary Arms' gallery, FH556RC-1-2-28_02: the device standing, seen square along one of its slots, on white, 2200 x 1467
Photo 0.825 in ± 0.03 in used
Primary Arms' gallery, FH556RC-1-2-28_02: the device standing, seen square along one of its slots, on white, 2200 x 1467, harvested
Scale: its own length in the photo, 1276 px (rows 96 to 1371), as overall_length (2.6): 490.8 px/in. Read by the silhouette's width row by row at a level of 200 of 255, each section where the width holds within two pixels; widths as read (a dark round reads up to 3% thin on white: not corrected), positions from the rear end's row; the slot's walls, the flat's ends and the slot's end picked by eye on a crop (± 5 px, ± 0.01 in)
405 px.
Diameter just ahead of that step0.805 in ± 0.03 in 20.4 mmProvisionalPhoto: Primary Arms' gallery, FH556RC-1-2-28_02: the device standing, seen square along one of its slots, on white, 2200 x 1467
Photo 0.805 in ± 0.03 in used
Primary Arms' gallery, FH556RC-1-2-28_02: the device standing, seen square along one of its slots, on white, 2200 x 1467, harvested
Scale: its own length in the photo, 1276 px (rows 96 to 1371), as overall_length (2.6): 490.8 px/in. Read by the silhouette's width row by row at a level of 200 of 255, each section where the width holds within two pixels; widths as read (a dark round reads up to 3% thin on white: not corrected), positions from the rear end's row; the slot's walls, the flat's ends and the slot's end picked by eye on a crop (± 5 px, ± 0.01 in)
395 px.
Diameter where the tines' front corner begins to round0.785 in ± 0.03 in 19.9 mmProvisionalPhoto: Primary Arms' gallery, FH556RC-1-2-28_02: the device standing, seen square along one of its slots, on white, 2200 x 1467
Photo 0.785 in ± 0.03 in used
Primary Arms' gallery, FH556RC-1-2-28_02: the device standing, seen square along one of its slots, on white, 2200 x 1467, harvested
Scale: its own length in the photo, 1276 px (rows 96 to 1371), as overall_length (2.6): 490.8 px/in. Read by the silhouette's width row by row at a level of 200 of 255, each section where the width holds within two pixels; widths as read (a dark round reads up to 3% thin on white: not corrected), positions from the rear end's row; the slot's walls, the flat's ends and the slot's end picked by eye on a crop (± 5 px, ± 0.01 in)
385.5 px at 0.953 of the length.
Round of the tines' front outer corner, length along the device0.122 in ± 0.02 in 3.1 mmProvisionalPhoto: Primary Arms' gallery, FH556RC-1-2-28_02: the device standing, seen square along one of its slots, on white, 2200 x 1467
Photo 0.122 in ± 0.02 in used
Primary Arms' gallery, FH556RC-1-2-28_02: the device standing, seen square along one of its slots, on white, 2200 x 1467, harvested
Scale: its own length in the photo, 1276 px (rows 96 to 1371), as overall_length (2.6): 490.8 px/in. Read by the silhouette's width row by row at a level of 200 of 255, each section where the width holds within two pixels; widths as read (a dark round reads up to 3% thin on white: not corrected), positions from the rear end's row; the slot's walls, the flat's ends and the slot's end picked by eye on a crop (± 5 px, ± 0.01 in)
The last 0.047 of the length.
Tines4ProvisionalPhoto: Primary Arms' gallery, FH556RC-1-2-28_02: the device standing, seen square along one of its slots, on white, 2200 x 1467
Photo 4 count used
Primary Arms' gallery, FH556RC-1-2-28_02: the device standing, seen square along one of its slots, on white, 2200 x 1467, harvested
Scale: its own length in the photo, 1276 px (rows 96 to 1371), as overall_length (2.6): 490.8 px/in. Read by the silhouette's width row by row at a level of 200 of 255, each section where the width holds within two pixels; widths as read (a dark round reads up to 3% thin on white: not corrected), positions from the rear end's row; the slot's walls, the flat's ends and the slot's end picked by eye on a crop (± 5 px, ± 0.01 in)
The straight view looks through two slots in line, one facing the lens and one behind it (daylight shows in a slit down the middle), and has a third's edge at its right; with the fourth opposite that, four slots a quarter turn apart and four tines. Both three-quarter views (51578f23fa00, e009b94ff230) show four tine ends.
The maker's name for it. No view on file is from the end.
Slots between the tines, width0.19 in ± 0.02 in 4.8 mmProvisionalPhoto: Primary Arms' gallery, FH556RC-1-2-28_02: the device standing, seen square along one of its slots, on white, 2200 x 1467
Photo 0.19 in ± 0.02 in used
Primary Arms' gallery, FH556RC-1-2-28_02: the device standing, seen square along one of its slots, on white, 2200 x 1467, harvested
Scale: its own length in the photo, 1276 px (rows 96 to 1371), as overall_length (2.6): 490.8 px/in. Read by the silhouette's width row by row at a level of 200 of 255, each section where the width holds within two pixels; widths as read (a dark round reads up to 3% thin on white: not corrected), positions from the rear end's row; the slot's walls, the flat's ends and the slot's end picked by eye on a crop (± 5 px, ± 0.01 in)
The slot that faces the lens: its walls 83 px left and 10 px right of the body's middle.
Slots, how far each one's middle lies off the bore axis (all the same way round)0.074 in ± 0.015 in 1.9 mmProvisionalPhoto: Primary Arms' gallery, FH556RC-1-2-28_02: the device standing, seen square along one of its slots, on white, 2200 x 1467
Photo 0.074 in ± 0.015 in used
Primary Arms' gallery, FH556RC-1-2-28_02: the device standing, seen square along one of its slots, on white, 2200 x 1467, harvested
Scale: its own length in the photo, 1276 px (rows 96 to 1371), as overall_length (2.6): 490.8 px/in. Read by the silhouette's width row by row at a level of 200 of 255, each section where the width holds within two pixels; widths as read (a dark round reads up to 3% thin on white: not corrected), positions from the rear end's row; the slot's walls, the flat's ends and the slot's end picked by eye on a crop (± 5 px, ± 0.01 in)
The slots aren't cut toward the axis: seen from outside with the muzzle up, each lies to the left of it. Through two opposite slots only a slit as wide as their overlap shows daylight, 20 px in the photo, which this offset and width give.
Slots, rear end (from the rear face)1.006 in ± 0.02 in 25.6 mmProvisionalPhoto: Primary Arms' gallery, FH556RC-1-2-28_02: the device standing, seen square along one of its slots, on white, 2200 x 1467
Photo 1.006 in ± 0.02 in used
Primary Arms' gallery, FH556RC-1-2-28_02: the device standing, seen square along one of its slots, on white, 2200 x 1467, harvested
Scale: its own length in the photo, 1276 px (rows 96 to 1371), as overall_length (2.6): 490.8 px/in. Read by the silhouette's width row by row at a level of 200 of 255, each section where the width holds within two pixels; widths as read (a dark round reads up to 3% thin on white: not corrected), positions from the rear end's row; the slot's walls, the flat's ends and the slot's end picked by eye on a crop (± 5 px, ± 0.01 in)
0.387 of the length.
Slots, round of their rear end0.09 in ± 0.02 in 2.3 mmProvisionalPhoto: Primary Arms' gallery, FH556RC-1-2-28_02: the device standing, seen square along one of its slots, on white, 2200 x 1467
Photo 0.09 in ± 0.02 in used
Primary Arms' gallery, FH556RC-1-2-28_02: the device standing, seen square along one of its slots, on white, 2200 x 1467, harvested
Scale: its own length in the photo, 1276 px (rows 96 to 1371), as overall_length (2.6): 490.8 px/in. Read by the silhouette's width row by row at a level of 200 of 255, each section where the width holds within two pixels; widths as read (a dark round reads up to 3% thin on white: not corrected), positions from the rear end's row; the slot's walls, the flat's ends and the slot's end picked by eye on a crop (± 5 px, ± 0.01 in)
A round end nearly the slot's half width, by eye.
Hole through the device ahead of the thread, as drawn0.244 in ± 0.008 in 6.2 mmProvisionalWorked out: {surefire-socom-3-prong.bore_d}
Worked out 0.244 in ± 0.008 in used
{surefire-socom-3-prong.bore_d}, harvested
NOT SOURCED for this device: no view on file looks into either end. Drawn as the 3-prong's, the same maker's device for the same bullet.
The thread it is cut for: major diameter0.496 in ± 0.0033 in 12.6 mmConfirmedStandard: US Army TDP drawing 8448549 (Barrel), sheet 1 of 2, rev J: Section M-M, the muzzle's thread; user-supplied scan, PDF page 213
Standard “1/2-28 UNEF-2A MAJOR DIA .4989/.4924” used
US Army TDP drawing 8448549 (Barrel), sheet 1 of 2, rev J: Section M-M, the muzzle's thread; user-supplied scan, PDF page 213, from the site owner
SureFire's number for it is its thread: FH556RC-1/2-28. The Army barrel's 1/2-28, as the catalog's barrels are drawn.
The thread it is cut for: minor diameter0.455 in ± 0.002 in 11.6 mmConfirmedStandard: US Army TDP drawing 8448549 (Barrel), sheet 1 of 2, rev J: Section M-M, the muzzle's thread; user-supplied scan, PDF page 213
Standard “MINOR DIA .4551 MAX” used
US Army TDP drawing 8448549 (Barrel), sheet 1 of 2, rev J: Section M-M, the muzzle's thread; user-supplied scan, PDF page 213, from the site owner
The thread it is cut for: pitch0.036 in ± 0.00005 in 0.9 mmConfirmedStandard: US Army TDP drawing 8448549 (Barrel), sheet 1 of 2, rev J: Section M-M, the muzzle's thread; user-supplied scan, PDF page 213
Standard “1/2-28 UNEF-2A” used
US Army TDP drawing 8448549 (Barrel), sheet 1 of 2, rev J: Section M-M, the muzzle's thread; user-supplied scan, PDF page 213, from the site owner
Threaded hole's depth from the rear face, as drawn0.69 in ± 0.01 in 17.5 mmConfirmedWorked out: {a2-flash-hider.thread_depth}
Worked out 0.69 in ± 0.01 in used
{a2-flash-hider.thread_depth}, from the site owner
NOT SOURCED for this device. Drawn as deep as the Army compensator's, which the same barrels take.
Indexing tab, width across the device, as drawn0.12 in ± 0.01 in 3 mmProvisionalWorked out: {surefire-socom-3-prong.tab_width}
Worked out 0.12 in ± 0.01 in used
{surefire-socom-3-prong.tab_width}, harvested
NOT MEASURED on this device: the tab and a round pocket each side of it show in the rear three-quarter photo (51578f23fa00), in line with a tine, and not in the one straight view. Drawn as the 3-prong's, which the same suppressors index on.
Indexing tab, front end (from the rear face), as drawn0.401 in ± 0.01 in 10.2 mmProvisionalWorked out: {surefire-socom-3-prong.tab_front_x}
Worked out 0.401 in ± 0.01 in used
{surefire-socom-3-prong.tab_front_x}, harvested
NOT MEASURED on this device: see tab_width.
Pockets either side of the tab, width, as drawn0.12 in ± 0.01 in 3 mmProvisionalWorked out: {surefire-socom-3-prong.pocket_width}
Worked out 0.12 in ± 0.01 in used
{surefire-socom-3-prong.pocket_width}, harvested
NOT MEASURED on this device: see tab_width.
Pockets, rear end (from the rear face), as drawn0.253 in ± 0.01 in 6.4 mmProvisionalWorked out: {surefire-socom-3-prong.pocket_rear_x}
Worked out 0.253 in ± 0.01 in used
{surefire-socom-3-prong.pocket_rear_x}, harvested
NOT MEASURED on this device: see tab_width.
Pockets, front end (from the rear face), as drawn0.48 in ± 0.01 in 12.2 mmProvisionalWorked out: {surefire-socom-3-prong.pocket_front_x}
Worked out 0.48 in ± 0.01 in used
{surefire-socom-3-prong.pocket_front_x}, harvested
NOT MEASURED on this device: see tab_width.
Pockets, diameter across their floors, as drawn0.817 in ± 0.02 in 20.8 mmProvisionalWorked out: {surefire-socom-3-prong.pocket_floor_d}
Worked out 0.817 in ± 0.02 in used
{surefire-socom-3-prong.pocket_floor_d}, harvested
NOT MEASURED on this device: see tab_width.
Where a SOCOM suppressor's rear face stands when locked on (from the barrel's shoulder)0.02 in ± 0.03 in 0.5 mmProvisionalWorked out: {surefire-socom556-rc2.seat_ahead_of_device_rear}
Worked out 0.02 in ± 0.03 in used
{surefire-socom556-rc2.seat_ahead_of_device_rear}, harvested
SureFire's manual for its SOCOM suppressors draws the lock ring's rear face a hairline ahead of the barrel's end, with none of the adapter showing behind it (that part's ledger has the reading and what brackets it: the published lengths come to 0.0 on a bare adapter).
Not shown by any source on file for this device alone (its photos are of the device bare; its manual is its installation): the figure is the suppressor's own sources', its manual's drawings of the two locked together. Here, no photo, drawing or sentence on file for this device shows a suppressor on it. The rear end's features, from the rear face: boss to 0.168, flange to 0.303, its front cone to 0.363, collar ring to 0.457, flats to 0.752, ring to 0.790, the two seal grooves 0.790 to 0.830 and 0.870 to 0.910, last land to 0.962. Each is shim_stack further from the shoulder. The 3-prong's are the same within 0.03.
What it goes with
By the way it mounts, and the figures each part on file states: a part whose figures say it doesn't fit is left out, and one whose fit can't be checked from what is published is marked. A check is against published figures, not a guarantee.
Muzzle thread
- Uppers
- Nordic Components 22RB .22 LR upper, 16", Panzer Arms AR57 ULT Complete AR-15 Upper Receiver - 5.7x28mm - 12", Panzer Arms AR57 Ultra Light Tactical Complete AR-15 Upper Receiver - 5.7x28mm - 16"
- Barrels
- Aero Precision 16" 5.56 CMV barrel, mid-length, BCM Standard 11.5" Carbine Barrel, Stripped, BCM Standard 14.5" Mid Length Barrel, Stripped, BCM Standard 16" Mid Length Barrel, Stripped, Bear Creek Arsenal BC-15 5.56 NATO, 16" Parkerized M4 Barrel, 1:7 Twist, Mid-Length Gas System, Daniel Defense CHF Chrome Lined 5.56 AR-15 Barrel - Carbine - Government - 10.3", Faxon Firearms Duty Series Pencil Profile 16" Mid-Length 5.56 NATO AR15 Barrel, Geissele Automatics CHF Chrome Lined Barrel - 5.56 - 13.9", Geissele Automatics CHF Chrome Lined Barrel - 5.56 - 14.5", Geissele Automatics CHF Chrome Lined Barrel - 5.56 - 16", Rosco Manufacturing Bloodline 10.5" M4 5.56 NATO, Rosco Manufacturing Bloodline 11.5" M4 5.56 NATO, Rosco Manufacturing Bloodline 12.5" M4 5.56 NATO
- Barrels
- Taurus TX22 4.6 in Threaded Barrel
Suppressor mount
- Suppressors
- SureFire SOCOM556-RC2
Prices on file
Each seller's latest reading of its own page: before tax and shipping, and not a quote. The pages are read again every night.
- Primary Arms $179.00 Nov 21, 2026, in stock that day
- Silencer Shop $179.00 Nov 21, 2026, stock not said
- T.REX ARMS $180.00 Nov 21, 2026, in stock that day