Suppressor
SureFire SOCOM556-RC2
A 5.56 mm suppressor that locks onto a SureFire SOCOM muzzle device with a half turn of its lock ring and comes off without tools: a plain tube with a recessed front plate, and at the rear a fluted lock ring with a spring latch. SureFire rates it for barrels of 10 inches and longer. Modelled from the outside only.

- Weight
- 17 oz ± 0.05 oz Conflictpublished: SureFire, SOCOM556-RC2 (product page, Key Attributes), the maker, read Oct 6, 2026Its sources span 16.65 oz to 17.05 oz.
- Lowest price
- $1,196.00 at Primary Arms, read Nov 21, 2026 (Dark Earth)
- Made for
- CALIBER 5.56 mm (.223 caliber); "Optimized for any 5.56 mm/.223-caliber weapon system with a minimum barrel length of 10 inches"; "Designed specifically for 10-inch and longer M4/M16-variant rifles and carbines"; "Durable high-temperature Inconel alloy/stainless-steel construction withstands full-auto use"
- Maker's number
- SOCOM556-RC2-BK
- Colours
- Black, Dark Earth
- Drawn as
- modelled
- Maker's page
- surefire.com
In “BCM 11.5 in carbine, suppressed”, a build on the start page, as it is.
Its figures
Every figure the site draws and checks it by, with where it came from. Open one for each source's reading, and why one is used where they differ.
Overall length, rear face to front face6.4 in ± 0.05 in 162.6 mmConflictPublished: SureFire, SOCOM556-RC2 (product page, Key Attributes), the maker, read Oct 6, 2026
Published “LENGTH 6.4 in (16.2 cm)” used
SureFire, SOCOM556-RC2 (product page, Key Attributes), the maker, read Oct 6, 2026 the page, harvested Oct 6, 2026
The same page's features: "6.4-inch overall length optimized for superior signature reduction".
Published “SPECIFICATIONS Diameter: 1.5in Length: 6.4in”
KYGunCo, SureFire SOCOM556 RC2 5.56 NATO 6.4" Silencer / Suppressor - Black, a seller, read Oct 6, 2026 the page, harvested Oct 6, 2026
SureFire's own table repeated by a seller: not independent of it.
Published “SPECIFICATIONS Caliber: 5.56mm / .223 Length: 6.4 inches Diameter: 1.5 inches Weight: 17 ounces”
Capitol Armory, SureFire Socom556-RC2, a seller, read Oct 6, 2026 the page, harvested Oct 6, 2026
The same page's "Technical Specs" table says "Length 6.2" and its FEATURES list "6.2\" long": the page has both.
Published “Length: 6.2””
Primary Arms, SureFire SOCOM RC2 5.56 Sound Suppressor - Black (and the Dark Earth page: the same list), a seller, read Oct 6, 2026 the page, harvested Oct 6, 2026
Published “Specifications: Caliber: 5.56 mm (.223 caliber) Length: 6.2 inches Weight: 17.0 ounces Diameter: 1.5 inches”
Midwest Gun Works, Surefire SOCOM RC Gen 2 5.56 Suppressor (SOCOM556-RC2-BK), a seller, read Oct 6, 2026 the page, harvested Oct 6, 2026
Published “Weight: 17 oz. Length: 6.2 in. Diameter: 1.5 in.”
Gun Digest, SureFire SOCOM 556 RC-2 (specification box), a review, read Oct 6, 2026 the page, harvested Oct 6, 2026
A specification box; not said to be measured.
Published “At only 6.2-inches in length and 1.5-inches in diameter, the SOCOM556 RC2 remains one of the most-compact 5.56mm suppressor”
On Target Magazine, SureFire SOCOM RC2 5.56mm Suppressor (April 2018), a review, read Oct 6, 2026 the page, harvested Oct 6, 2026
Not said to be measured.
The maker's own figure, on its page today, and the one the photos bear out (the side view scaled by the 1.5 in tube reads 6.4 from the lock ring's rear face to the front rim). The 6.2 of three sellers and two 2017-18 articles is kept as it is printed: none says what it spans, and it matches nothing on the photos.
surefire and primary-arms differ by 0.2 in beyond what each states it is good to.
surefire and midwest-gun-works differ by 0.2 in beyond what each states it is good to.
surefire and gun-digest differ by 0.2 in beyond what each states it is good to.
surefire and on-target differ by 0.2 in beyond what each states it is good to.
kygunco and primary-arms differ by 0.2 in beyond what each states it is good to.
kygunco and midwest-gun-works differ by 0.2 in beyond what each states it is good to.
kygunco and gun-digest differ by 0.2 in beyond what each states it is good to.
kygunco and on-target differ by 0.2 in beyond what each states it is good to.
capitol-armory and primary-arms differ by 0.2 in beyond what each states it is good to.
capitol-armory and midwest-gun-works differ by 0.2 in beyond what each states it is good to.
capitol-armory and gun-digest differ by 0.2 in beyond what each states it is good to.
capitol-armory and on-target differ by 0.2 in beyond what each states it is good to.
SureFire says 6.4 in on its page (twice); three sellers and two magazine pieces say 6.2. Nobody says between which ends. The straight side photos settle it: scaled by the tube's 1.5 in, the lock ring's rear face to the front rim is 6.4 (the `side` reading below), and no 6.2 in stretch of it ends on anything (the body's tube alone, without the ring, is 5.5).
Largest outside diameter (the body's tube)1.5 in ± 0.05 in 38.1 mmConfirmedPublished: SureFire, SOCOM556-RC2 (product page, Key Attributes), the maker, read Oct 6, 2026
Published “DIAMETER 1.5 in (3.8 cm)” used
SureFire, SOCOM556-RC2 (product page, Key Attributes), the maker, read Oct 6, 2026 the page, harvested Oct 6, 2026
Published “Diameter: 1.5””
Primary Arms, SureFire SOCOM RC2 5.56 Sound Suppressor - Black (and the Dark Earth page: the same list), a seller, read Oct 6, 2026 the page, harvested Oct 6, 2026
Published “Diameter: 1.5 inches”
Midwest Gun Works, Surefire SOCOM RC Gen 2 5.56 Suppressor (SOCOM556-RC2-BK), a seller, read Oct 6, 2026 the page, harvested Oct 6, 2026
The maker's figure; every seller repeats it.
Taken as the tube's: in SureFire's manual's outline drawings and in the photos the lock ring's round is the tube's size within 0.02 in, and only the latch's housing stands outside it (ring_d, latch_housing_r).
What it adds to the weapon's length on the muzzle device it is measured with3.8 in ± 0.05 in 96.5 mmConfirmedPublished: SureFire, SOCOM556-RC2 (product page, Key Attributes), the maker, read Oct 6, 2026
Published “LENGTH ADDED TO WEAPON* 3.8 in (9.7 cm) *Actual length may vary, depending on which SureFire adapter is used” used
SureFire, SOCOM556-RC2 (product page, Key Attributes), the maker, read Oct 6, 2026 the page, harvested Oct 6, 2026
SureFire names no adapter for the figure ("*Actual length may vary, depending on which SureFire adapter is used") and doesn't say from where it is taken. It is its own length less an adapter's: 6.4 - 2.6 (the SOCOM 3-prong's and 4-prong's "LENGTH 2.6 in" on SureFire's pages) = 3.8, which is the suppressor's rear face standing at the adapter's rear face, on the barrel's shoulder: what the manual's Figures 6 and 7A draw (seat_ahead_of_device_rear). On the WARCOMP ("LENGTH 2.7 inches (6.8 cm)", https://www.surefire.com/warcomp-flash-hider/) it would add 3.7; the 4-prong is 2.6 as the 3-prong is (https://www.surefire.com/socom-4-prong-flash-hider/). A check on the seat, not a dimension the model is drawn from.
Half the overall length (where the traced outline's middle sits from the rear face)3.2 in ± 0.025 in 81.3 mmProvisionalWorked out: {.length} / 2
Worked out 3.2 in ± 0.025 in used
{.length} / 2, harvested
Locked on: its rear face ahead of the barrel's shoulder (where the muzzle device's frame has its origin)0.02 in ± 0.03 in 0.5 mmProvisionalPhoto: a photo on file
Photo 0.02 in ± 0.03 in used
a photo on file, harvested
Scale: Figure 7A's own scales: 235.6 px/in by the suppressor's length as `length`, 204 px/in by the barrel's stub against Figure 7B's adapter at its published 2.6 in. Read by Figure 7A: the barrel's end (its chamfer's end, column 4209.5) to the lock ring's rear face (column 4214 to 4216.5): 4.5 to 7 px, 0.02 to 0.03 in at either scale. Figure 7B gives what the barrel's end is: the adapter's rear boss begins there (columns 3898, then the flange at 3929.5)
A drawing's hairline between the ring and the barrel's end, not a dimension SureFire states.
Worked out 0 in ± 0.09 in
{.added_length} - {.length} + 2.6in, harvested
The 2.6 in is the adapter's, another part's figure: written here as a length until that part's ledger is in the catalog (the orchestrator's to join).
What SureFire draws: the ring's rear face a hairline ahead of the barrel's end. Its published figures come to 0.0 on a bare 2.6 in adapter and to 0.02 with the adapter's shims under it, and the photo of one on a rifle allows up to 0.08: all inside one another's ±.
Where it stands is the device's anchor (`suppressor_seat`); this is what the suppressor's own sources say that anchor is. The lock ring swallows the adapter whole: in the manual's Figures 6 and 7A (locked on) the barrel's plain tube runs straight into the lock ring's rear face, and none of the adapter that Figures 4 and 7B draw ahead of the barrel's chamfered end shows (its rear boss, its flange, its wrench flats). The same in On Target's photo of one locked on a rifle (0c69f586fa8c): under the ring there is a plain cylinder 0.70 in across (89 px of a ring 192 px across), the barrel or the adapter's 0.685 in rear boss, with a bright band 0.08 in tall at its top against the ring, and no flange. So the rear face stands between the shoulder and 0.08 in ahead of it. SureFire's figures bracket the same place: 6.4 long and adds 3.8, on an adapter 2.6 long, is 0.0; with the shims SureFire fits under its adapters (the 3-prong's own ledger has a stack of 0.018 in) it is 0.02. One caution on the figures of the manual: they are not one scale throughout (in Figure 7B the suppressor is drawn at 216.6 px/in by its own length and the adapter at 189 px/in by its 2.6 in), so only what lies at one place along a figure is read on it, as here.
Lock ring: its length, rear face to its front edge0.8 in ± 0.03 in 20.3 mmCorroboratedPhoto: Primary Arms SOCOM556-RC2-DE_01: the Dark Earth suppressor from its right side on white, 2000 x 1334
Photo 0.8 in ± 0.03 in used
Primary Arms SOCOM556-RC2-DE_01: the Dark Earth suppressor from its right side on white, 2000 x 1334, harvested
Scale: the tube's own width column by column as od (1.5 in): 352.7 px, 235.1 px/in (tools/trace.py, calibrate: tube); the end faces behind their rims' arcs come 6.39 in apart at that scale, and lengths are counted from the rear face so found (the silhouette trimmed to `length` about its middle). Read by the traced side outline's stations (profiles.side)
Where the ring's front chamfer ends (the outline's 0.885 less the 0.0875 trimmed at the rear). The ± is the rear face's place behind its rim.
Photo 0.84 in ± 0.02 in
a photo on file, harvested
Scale: the suppressor's own length as `length`: 1386.5 px, 216.6 px/in (its tube's 327 px as od gives 218.0: the figure is in proportion within 0.6%). Read by strokes crossed by scan lines along and across the figure (a copy on file, vstrokes.py)
Rear face at column 4644, the ring's front at 4825.5.
The photograph of the product; SureFire's outline drawing has the ring 0.04 in longer, which is the photo's ± and a line's width in the drawing together. Kept beside it.
Lock ring: the diameter of its round (between its flutes, away from the latch)1.5 in ± 0.01 in 38.1 mmProvisionalPhoto: a photo on file
Photo 1.5 in ± 0.01 in used
a photo on file, harvested
Scale: the suppressor's own length as `length`: 1386.5 px, 216.6 px/in (its tube's 327 px as od gives 218.0: the figure is in proportion within 0.6%). Read by strokes crossed by scan lines along and across the figure (a copy on file, vstrokes.py)
The ring's outline 327.5 px across (rows 1962.5 to 2290) where the tube's is 327.0 (rows 1973.5 to 2300.5).
The same as the tube's in SureFire's drawing. In the photos the ring reads 0.02 to 0.08 in inside the tube's line on one side (5 to 12 px) and stands outside it on the other, differently in each view: the ring is unlocked there, and unlocked it sits off the body's axis (Figure 7B draws it 0.050 in off, 11 px, toward the top of that view, the latch toward the viewer; Figure 7A, locked, has its outline on the body's lines).
Lock ring: the round on its rear outer edge (radius)0.09 in ± 0.02 in 2.3 mmProvisionalPhoto: Primary Arms SOCOM556-RC2-DE_01: the Dark Earth suppressor from its right side on white, 2000 x 1334
Photo 0.09 in ± 0.02 in used
Primary Arms SOCOM556-RC2-DE_01: the Dark Earth suppressor from its right side on white, 2000 x 1334, harvested
Scale: the tube's own width column by column as od (1.5 in): 352.7 px, 235.1 px/in (tools/trace.py, calibrate: tube); the end faces behind their rims' arcs come 6.39 in apart at that scale, and lengths are counted from the rear face so found (the silhouette trimmed to `length` about its middle). Read by the traced side outline's stations (profiles.side)
The outline reaches the ring's full size 0.0935 in ahead of the rear face; an arc of 0.09 passes within 0.011 of its two points between.
Lock ring: the chamfer on its front outer edge (its length along the axis; as much across)0.05 in ± 0.015 in 1.3 mmProvisionalPhoto: Primary Arms SOCOM556-RC2-DE_01: the Dark Earth suppressor from its right side on white, 2000 x 1334
Photo 0.05 in ± 0.015 in used
Primary Arms SOCOM556-RC2-DE_01: the Dark Earth suppressor from its right side on white, 2000 x 1334, harvested
Scale: the tube's own width column by column as od (1.5 in): 352.7 px, 235.1 px/in (tools/trace.py, calibrate: tube); the end faces behind their rims' arcs come 6.39 in apart at that scale, and lengths are counted from the rear face so found (the silhouette trimmed to `length` about its middle). Read by the traced side outline's stations (profiles.side)
The outline falls from the ring's full size at 0.7355 in to 0.04 in inside it at 0.7975 (0.062 along, 0.04 across): drawn as one chamfer at 45 degrees of the mean.
The opening in the lock ring's rear face (what the muzzle device goes into)1.03 in ± 0.06 in 26.2 mmCorroboratedPhoto: Primary Arms SOCOM556-RC2-DE_02: the lock ring's end from behind and to the right, 2000 x 1333), turned 24.5 degrees so the axis is level (a copy on file
Photo 1.03 in ± 0.06 in used
Primary Arms SOCOM556-RC2-DE_02: the lock ring's end from behind and to the right, 2000 x 1333), turned 24.5 degrees so the axis is level (a copy on file, harvested
Scale: the tube's silhouette across the axis just ahead of the ring, 426 px, as od (1.5 in), less 2.3% for the ring's end standing about 0.7 in nearer the lens. Read by same-direction ratio: the opening's ellipse is 300 px across the axis (rows 255 to 555)
Photo 0.99 in ± 0.08 in
SureFire user manual 71-01-863 Rev G as Silencer Central hosts it), printed page 3, Figure 5B (the suppressor's rear end seen from behind, harvested
Scale: the lock ring's outline across the same direction, as ring_d. Read by the opening's outermost circle against the ring's outline along their long axes: about 0.67 of it, by eye on a 250 dpi render
A photograph, read on a grid; SureFire's drawing agrees within 0.04 in. A second photo (the black one, a2f86f6ddb7e) reads 0.88 to 0.95 depending on where the tube's far edge, out of that picture, is taken to be.
For the device's fit: the adapter's largest diameter has to pass it. The opening's centre reads 0.07 in off the tube's axis in the photo (the ring unlocked: ring_d's note).
The toothed steel collar between the lock ring and the body, as it shows in the gap1.26 in ± 0.04 in 32 mmProvisionalPhoto: Primary Arms SOCOM556-RC2-DE_01: the Dark Earth suppressor from its right side on white, 2000 x 1334
Photo 1.26 in ± 0.04 in used
Primary Arms SOCOM556-RC2-DE_01: the Dark Earth suppressor from its right side on white, 2000 x 1334, harvested
Scale: the tube's own width column by column as od (1.5 in): 352.7 px, 235.1 px/in (tools/trace.py, calibrate: tube); the end faces behind their rims' arcs come 6.39 in apart at that scale, and lengths are counted from the rear face so found (the silhouette trimmed to `length` about its middle). Read by the traced side outline's stations (profiles.side)
The outline's smallest radius in the gap, 0.629 at 0.826 in from the rear face: what shows between the ring's chamfer and the body's shoulder, so the collar is no larger than this.
The body's rear end, from the suppressor's rear face (where its shoulder's round begins)0.83 in ± 0.03 in 21.1 mmProvisionalPhoto: Primary Arms SOCOM556-RC2-DE_01: the Dark Earth suppressor from its right side on white, 2000 x 1334
Photo 0.83 in ± 0.03 in used
Primary Arms SOCOM556-RC2-DE_01: the Dark Earth suppressor from its right side on white, 2000 x 1334, harvested
Scale: the tube's own width column by column as od (1.5 in): 352.7 px, 235.1 px/in (tools/trace.py, calibrate: tube); the end faces behind their rims' arcs come 6.39 in apart at that scale, and lengths are counted from the rear face so found (the silhouette trimmed to `length` about its middle). Read by the traced side outline's stations (profiles.side)
The outline turns outward at 0.826 and reaches the tube's full size at 0.9185 (SureFire's Figure 7B has the tube's rear edge at 0.914).
The body's rear shoulder: its round (radius)0.09 in ± 0.02 in 2.3 mmProvisionalPhoto: Primary Arms SOCOM556-RC2-DE_01: the Dark Earth suppressor from its right side on white, 2000 x 1334
Photo 0.09 in ± 0.02 in used
Primary Arms SOCOM556-RC2-DE_01: the Dark Earth suppressor from its right side on white, 2000 x 1334, harvested
Scale: the tube's own width column by column as od (1.5 in): 352.7 px, 235.1 px/in (tools/trace.py, calibrate: tube); the end faces behind their rims' arcs come 6.39 in apart at that scale, and lengths are counted from the rear face so found (the silhouette trimmed to `length` about its middle). Read by the traced side outline's stations (profiles.side)
body_rear_x to where the outline reaches the tube's size: 0.0925 in.
The body's front corner: its round (radius)0.075 in ± 0.02 in 1.9 mmProvisionalPhoto: Primary Arms SOCOM556-RC2-DE_01: the Dark Earth suppressor from its right side on white, 2000 x 1334
Photo 0.075 in ± 0.02 in used
Primary Arms SOCOM556-RC2-DE_01: the Dark Earth suppressor from its right side on white, 2000 x 1334, harvested
Scale: the tube's own width column by column as od (1.5 in): 352.7 px, 235.1 px/in (tools/trace.py, calibrate: tube); the end faces behind their rims' arcs come 6.39 in apart at that scale, and lengths are counted from the rear face so found (the silhouette trimmed to `length` about its middle). Read by the traced side outline's stations (profiles.side)
The outline leaves the tube's size 0.13 in behind the front face and is 0.006, 0.023 and 0.046 in inside it at 0.0645, 0.0215 and 0.0025 in from the face: an arc of 0.07 to 0.09.
Lock ring: finger flutes round it6ProvisionalPhoto: Primary Arms SOCOM556-RC2-BK_03, -DE_03, -BK_04, -DE_04; a copy on file puts the four rings side by side
Photo 6 count used
Primary Arms SOCOM556-RC2-BK_03, -DE_03, -BK_04, -DE_04; a copy on file puts the four rings side by side, harvested
Scale: each ring's own width in its view (an angle round the ring is the arcsine of a place across it). Read by the flutes' and the latch's places across the ring in each view, turned into angles
Counted over four views that between them show the whole turn (Primary Arms' two standing views and its two pictures beside the pouch: 89bfa38440ab, 2b4e7d4cd0be, 35eefa9362ed, ceff8f4484c0): the flutes stand 45 degrees apart (three whole ones across the face of the standing black view, at -45, 0 and +45 degrees by their places across the ring; in each view with the latch in it the nearest flute is 63 to 65 degrees round from the latch). Eight places 45 degrees apart, the two either side of the latch taken by its housing: six flutes.
Lock ring: the angle between neighbouring flutes45° ± 3°ProvisionalPhoto: Primary Arms SOCOM556-RC2-BK_03, the black suppressor standing on its lock ring
Photo 45 deg ± 3 deg used
Primary Arms SOCOM556-RC2-BK_03, the black suppressor standing on its lock ring, harvested
Scale: the ring's width in the view, 224 px. Read by three flutes' middles at -75, 0 and +75 px of a radius of 112: 42 degrees apart by the arcsine, 45 with the ring's rounded edge allowed for
Lock ring: a flute's width0.41 in ± 0.03 in 10.4 mmProvisionalPhoto: Primary Arms SOCOM556-RC2-BK_03, the black suppressor standing on its lock ring, 2000 x 1333
Photo 0.41 in ± 0.03 in used
Primary Arms SOCOM556-RC2-BK_03, the black suppressor standing on its lock ring, 2000 x 1333, harvested
Scale: the ring's width in the view as ring_d, and its length as ring_length. Read by the flute that faces the lens
0.278 of the ring's width.
Lock ring: a flute's length from the rear face to its rounded front end0.61 in ± 0.03 in 15.5 mmCorroboratedPhoto: a photo on file
Photo 0.55 in ± 0.04 in
Primary Arms SOCOM556-RC2-BK_03, the black suppressor standing on its lock ring, 2000 x 1333, harvested
Scale: the ring's width in the view as ring_d, and its length as ring_length. Read by the flute that faces the lens
0.67 of the ring's length, from the ring's rear rim to the flute's arch.
Photo 0.61 in ± 0.03 in used
a photo on file, harvested
Scale: the suppressor's own length in the figure as `length`: 1508 px. Read by the upper flute's front arch, 145 px ahead of the ring's rear face
A drawn outline with a clean rear face to count from; the photograph's rear rim is the ring's rounded edge seen from above, which shortens it.
Lock ring: how far a flute's floor lies below the ring's round0.03 in ± 0.015 in 0.8 mmProvisionalPhoto: Primary Arms SOCOM556-RC2-BK_03, the black suppressor standing on its lock ring, 2000 x 1333
Photo 0.03 in ± 0.015 in used
Primary Arms SOCOM556-RC2-BK_03, the black suppressor standing on its lock ring, 2000 x 1333, harvested
Scale: the ring's length in the view as ring_length. Read by the shadow under a flute's front arch, about a twenty-seventh of the ring's length tall, taken as the wall's height under a light from about 45 degrees above
The weakest figure here: no view is along a flute. A flute is a recess (every one has a shadow under its front arch and none casts one) with a wall all round it in every view, so its floor is taken to follow the ring's round: a flat floor this deep at its middle would have no wall left at its sides.
Lock ring, locked: the latch's place round the axis, from the top toward the rifle's right136° ± 8°ProvisionalPhoto: a photo on file
Photo 136 deg ± 8 deg used
a photo on file, harvested
Scale: the lock ring's own outline in the figure. Read by the latch tab's middle 0.72 of the ring's radius below its centre line: 46 degrees below level on the side toward the viewer
As SureFire's Figures 6 and 7A draw the ring locked: the latch low on the side toward the viewer, which is the rifle's right (the muzzle is to the right, and the adapter's indexing tab, which the suppressor's slot seats on, is drawn at the bottom in the same views: Figure 5A). That is where SureFire has the tab put: "To properly time the indexing tab on the adapter to bottom dead center (BDC) position, a combination of shims may be required" (SureFire SOCOM Suppressor Adapter Installation Instructions, 71-01-997 Rev E, as T.REX ARMS hosts it: https://img.trex-arms.com/wp/uploads/2024/01/71-01-997_Suppressor-Adapter-Installation_Rev-E_print.pdf; a copy on file). A WARCOMP clocked for a right- or left-handed shooter turns the suppressor with it ("the suppressor won't be indexed at the bottom-dead-center position", the same manual).
Latch tab: its rear end from the suppressor's rear face0.4 in ± 0.03 in 10.2 mmProvisionalPhoto: a photo on file
Photo 0.4 in ± 0.03 in used
a photo on file, harvested
Scale: the suppressor's own length as `length`: 1386.5 px, 216.6 px/in (its tube's 327 px as od gives 218.0: the figure is in proportion within 0.6%). Read by strokes crossed by scan lines along and across the figure (a copy on file, vstrokes.py)
The tab marked PUSH: columns 4730 to 4802 of a ring that begins at 4644.
Latch tab: its front end from the suppressor's rear face0.73 in ± 0.03 in 18.5 mmProvisionalPhoto: a photo on file
Photo 0.73 in ± 0.03 in used
a photo on file, harvested
Scale: the suppressor's own length as `length`: 1386.5 px, 216.6 px/in (its tube's 327 px as od gives 218.0: the figure is in proportion within 0.6%). Read by strokes crossed by scan lines along and across the figure (a copy on file, vstrokes.py)
Latch tab: its width round the ring0.3 in ± 0.03 in 7.6 mmProvisionalPhoto: a photo on file
Photo 0.3 in ± 0.03 in used
a photo on file, harvested
Scale: the suppressor's own length as `length`: 1386.5 px, 216.6 px/in (its tube's 327 px as od gives 218.0: the figure is in proportion within 0.6%). Read by strokes crossed by scan lines along and across the figure (a copy on file, vstrokes.py)
66 px tall in the figure, face on.
Latch tab: how far its top stands outside the tube's diameter0.037 in ± 0.015 in 0.9 mmProvisionalPhoto: a photo on file
Photo 0.037 in ± 0.015 in used
a photo on file, harvested
Scale: the lock ring's own outline in the figure. Read by the latch tab's middle 0.72 of the ring's radius below its centre line: 46 degrees below level on the side toward the viewer
The ring's outline on the latch's side reaches 9 px below the tube's lower line (rows 1696.5 and 1687.5).
Exit bore, as it shows in the front plate0.35 in ± 0.03 in 8.9 mmProvisionalPhoto: Primary Arms SOCOM556-RC2-DE_00: the front plate from ahead and to the right, 2000 x 1333), turned 21.5 degrees so the axis is level (a copy on file
Photo 0.35 in ± 0.03 in used
Primary Arms SOCOM556-RC2-DE_00: the front plate from ahead and to the right, 2000 x 1333), turned 21.5 degrees so the axis is level (a copy on file, harvested
Scale: the tube's silhouette across the axis at the front, 460 px, as od (1.5 in): 307 px/in across the axis. Read by same-direction ratios across the axis, on a 20 px grid
The dark hole, 107 px.
Front plate: the collar round the bore, its outside diameter0.48 in ± 0.03 in 12.2 mmProvisionalPhoto: Primary Arms SOCOM556-RC2-DE_00: the front plate from ahead and to the right, 2000 x 1333), turned 21.5 degrees so the axis is level (a copy on file
Photo 0.48 in ± 0.03 in used
Primary Arms SOCOM556-RC2-DE_00: the front plate from ahead and to the right, 2000 x 1333), turned 21.5 degrees so the axis is level (a copy on file, harvested
Scale: the tube's silhouette across the axis at the front, 460 px, as od (1.5 in): 307 px/in across the axis. Read by same-direction ratios across the axis, on a 20 px grid
148 px.
Front plate: the flat floor of its recess, its diameter0.9 in ± 0.05 in 22.9 mmProvisionalPhoto: Primary Arms SOCOM556-RC2-DE_00: the front plate from ahead and to the right, 2000 x 1333), turned 21.5 degrees so the axis is level (a copy on file
Photo 0.9 in ± 0.05 in used
Primary Arms SOCOM556-RC2-DE_00: the front plate from ahead and to the right, 2000 x 1333), turned 21.5 degrees so the axis is level (a copy on file, harvested
Scale: the tube's silhouette across the axis at the front, 460 px, as od (1.5 in): 307 px/in across the axis. Read by same-direction ratios across the axis, on a 20 px grid
275 px, where the recess's wall meets its floor.
Front rim: the flats of its inner edge (the scallops of the crown)8ProvisionalPhoto: SureFire's product picture SOCOM556-RC2-BK-isoL, 1280 x 1280
Photo 8 count used
SureFire's product picture SOCOM556-RC2-BK-isoL, 1280 x 1280, harvested
Scale: none: a count. Read by the corners of the rim's inner edge, all the way round
Counted on SureFire's own picture, which shows the whole rim from ahead: eight corners round the rim's inner edge, four on the near half and four on the far half (a copy on file, at 140,95; 190,150; 215,260; 200,330; 150,375; 100,340; 90,230; 100,160).
Front rim: its inner edge across two opposite flats, at the front face1.22 in ± 0.04 in 31 mmCorroborated2 readings
Photo 1.19 in ± 0.04 in
Primary Arms SOCOM556-RC2-DE_00: the front plate from ahead and to the right, 2000 x 1333), turned 21.5 degrees so the axis is level (a copy on file, harvested
Scale: the tube's silhouette across the axis at the front, 460 px, as od (1.5 in): 307 px/in across the axis. Read by same-direction ratios across the axis, on a 20 px grid
365 px between the top flat and the bottom one.
Photo 1.24 in ± 0.05 in
a photo on file, harvested
Scale: the front end's silhouette across the axis, 312 px, as od. Read by 280 px between the top corner and the bottom one: 1.346 across corners, times the cosine of 22.5 degrees
Between a photograph read across the flats and SureFire's picture read across the corners: neither is square to the face, and they differ by their own ±.
Front plate: how far the recess's floor lies behind the front face0.16 in ± 0.04 in 4.1 mmProvisionalPhoto: Primary Arms SOCOM556-RC2-DE_00: the front plate from ahead and to the right, 2000 x 1333), turned 21.5 degrees so the axis is level (a copy on file
Photo 0.16 in ± 0.04 in used
Primary Arms SOCOM556-RC2-DE_00: the front plate from ahead and to the right, 2000 x 1333), turned 21.5 degrees so the axis is level (a copy on file, harvested
Scale: the tube's silhouette across the axis at the front, 460 px, as od (1.5 in): 307 px/in across the axis. Read by same-direction ratios across the axis, on a 20 px grid
The floor's circle and the rim's inner edge are ellipses whose centres stand 41 px apart along the axis in the picture; the collar's own ellipse (80 px along the axis for 148 across) says the face is seen from 57 degrees off its axis, so a depth shows at 0.84 of itself: 258.5 px/in.
Front plate: how far the collar round the bore stands above the recess's floor0.06 in ± 0.03 in 1.5 mmProvisionalPhoto: Primary Arms SOCOM556-RC2-DE_00: the front plate from ahead and to the right, 2000 x 1333), turned 21.5 degrees so the axis is level (a copy on file
Photo 0.06 in ± 0.03 in used
Primary Arms SOCOM556-RC2-DE_00: the front plate from ahead and to the right, 2000 x 1333), turned 21.5 degrees so the axis is level (a copy on file, harvested
Scale: the tube's silhouette across the axis at the front, 460 px, as od (1.5 in): 307 px/in across the axis. Read by same-direction ratios across the axis, on a 20 px grid
The collar's top is 26.5 px along the axis behind the rim's inner edge (0.10 in), the floor 41 px.
Lock ring: how far round from the latch tab's middle its pocket runs, on the side the latch's arm lies47° ± 8°ProvisionalPhoto: Primary Arms SOCOM556-RC2-DE_04 and -BK_04, standing beside the pouch
Photo 47 deg ± 8 deg used
Primary Arms SOCOM556-RC2-DE_04 and -BK_04, standing beside the pouch, harvested
Scale: each ring's own width in its view (an angle round the ring is the arcsine of a place across it). Read by DE_04: the tab's middle at -23 degrees, the pocket's far wall lost in the flute at the silhouette; BK_04: the nearest flute's middle 63 degrees from the tab, its near edge 16 degrees nearer: the pocket ends at that flute's land, 47 degrees from the tab
The ring is cut away down to the toothed collar round the latch, between the flutes either side of it. Toward smaller angles (round from the top toward the rifle's right is positive): in the view beside the pouch the pocket runs left from the tab to the next flute.
Lock ring: how far round from the latch tab's middle its pocket runs on the other side25° ± 8°ProvisionalPhoto: Primary Arms SOCOM556-RC2-DE_04, standing beside the pouch, the latch toward the lens
Photo 25 deg ± 8 deg used
Primary Arms SOCOM556-RC2-DE_04, standing beside the pouch, the latch toward the lens, harvested
Scale: the ring's own width in the view. Read by the tab's middle at -23 degrees and the pocket's wall beyond it at +2
Lock ring: the latch's pocket, its rear wall from the suppressor's rear face0.17 in ± 0.04 in 4.3 mmProvisionalPhoto: On Target Magazine, 1-SF-SOCOM-MainC.jpg: an RC2 locked on a rifle standing muzzle up, the latch toward the lens, 933 x 1400
Photo 0.17 in ± 0.04 in used
On Target Magazine, 1-SF-SOCOM-MainC.jpg: an RC2 locked on a rifle standing muzzle up, the latch toward the lens, 933 x 1400, harvested
Scale: the lock ring's own length in the view, 111 px, as ring_length (its width, 192 px, as ring_d gives the same scale within 4%). Read by read on a crop enlarged 3.6 times (a copy on file)
The pocket's wall where it turns along the ring, 85 of the ring's 400 enlarged px above the rear face. The ring's rear rim is whole under it.
Lock ring: how far the latch's pocket's floor lies below the ring's round0.06 in ± 0.03 in 1.5 mmProvisionalPhoto: On Target Magazine, 1-SF-SOCOM-MainC.jpg: an RC2 locked on a rifle standing muzzle up, the latch toward the lens, 933 x 1400
Photo 0.06 in ± 0.03 in used
On Target Magazine, 1-SF-SOCOM-MainC.jpg: an RC2 locked on a rifle standing muzzle up, the latch toward the lens, 933 x 1400, harvested
Scale: the lock ring's own length in the view, 111 px, as ring_length (its width, 192 px, as ring_d gives the same scale within 4%). Read by read on a crop enlarged 3.6 times (a copy on file)
A shaded band about 25 of the ring's 690 enlarged px across.
Weak: the pocket's wall where it turns, taken as wide in the view as it is tall. The floor is the ring's own metal (lit as the ring is, no teeth on it): the toothed collar shows only ahead of the ring's front edge.
Latch: its arm's width along the axis (the arm runs round the ring's front edge from the tab to its pivot pin)0.15 in ± 0.03 in 3.8 mmProvisionalPhoto: On Target Magazine, 1-SF-SOCOM-MainC.jpg: an RC2 locked on a rifle standing muzzle up, the latch toward the lens, 933 x 1400
Photo 0.15 in ± 0.03 in used
On Target Magazine, 1-SF-SOCOM-MainC.jpg: an RC2 locked on a rifle standing muzzle up, the latch toward the lens, 933 x 1400, harvested
Scale: the lock ring's own length in the view, 111 px, as ring_length (its width, 192 px, as ring_d gives the same scale within 4%). Read by read on a crop enlarged 3.6 times (a copy on file)
75 of the ring's 400 enlarged px, its front edge level with the tab's front end.
What it goes with
By the way it mounts, and the figures each part on file states: a part whose figures say it doesn't fit is left out, and one whose fit can't be checked from what is published is marked. A check is against published figures, not a guarantee.
Suppressor mount
Prices on file
Each seller's latest reading of its own page: before tax and shipping, and not a quote. The pages are read again every night.
- Primary Arms $1,196.00 Dark Earth Nov 21, 2026, in stock that day
- Silencer Shop $1,196.00 Black Nov 21, 2026, stock not said
- Impact Guns $1,196.00 Dark Earth Nov 21, 2026, in stock that day
- KYGUNCO $1,196.00 Black Nov 21, 2026, in stock that day
- Midwest Gun Works $1,196.00 Black Nov 21, 2026, in stock that day
- Primary Arms $1,196.00 Black Nov 17, 2026, in stock that day
- Capitol Armory $1,289.00 Nov 21, 2026, in stock that day
- Impact Guns $1,196.00 Black Nov 21, 2026, out of stock that day