Muzzle device
SureFire WARCOMP Flash Hider
A three-tine flash hider with two rows of ports round its collar, turned toward one side to hold the muzzle down, that SureFire's SOCOM suppressors lock onto: a flange with the indexing tab that is timed with shims.

- Weight
- 3.8 oz Confirmedpublished: SureFire, WARCOMP Flash Hider (the product's page; its Key Attributes), the maker, read Oct 6, 2026
- Lowest price
- $152.00 at Primary Arms, read Nov 21, 2026
- Made for
- .223 Caliber (5.56mm) + 1/2-28 Thread Pitch
- Maker's number
- WARCOMP-556-1/2-28
- Colour
- SureFire DLC black
- Drawn as
- modelled
- Maker's page
- surefire.com
In “Aero 5.56 carbine”, a build on the start page, in place of its Mil-spec A2 flash hider, 1/2-28 (drawing 9349051).
Its figures
Every figure the site draws and checks it by, with where it came from. Open one for each source's reading, and why one is used where they differ.
Overall length (rear face to the tines' front)2.7 in ± 0.05 in 68.6 mmConfirmedPublished: SureFire, WARCOMP Flash Hider (the product's page; its Key Attributes), the maker, read Oct 6, 2026
Published “LENGTH 2.7 inches (6.8 cm)” used
SureFire, WARCOMP Flash Hider (the product's page; its Key Attributes), the maker, read Oct 6, 2026 the page, harvested Oct 6, 2026
One figure for the page, which sells two models (5.56 mm 1/2-28 and 7.62 mm 5/8-24).
Published “Length 2.7" (the table's column "SureFire WARCOMP 3-Prong")”
T.REX ARMS, SureFire WARCOMP Flash Hider (one page for the three-prong and the Closed Tine), a seller, read Oct 6, 2026 the page, harvested Oct 6, 2026
The maker's own page; the seller's table says the same.
Shims between the barrel's shoulder and the device's rear face, as installed0.018 in ± 0.018 in 0.5 mmProvisionalWorked out: Between no shim and one pitch of the 1/2-28 thread (1/28 in), from the manual's shim chart for 28 threads per inch (71-01-997 Rev E, pages 1 and 5; the copy T.REX ARMS hosts, a copy on file): the midpoint, ± half the range.
Worked out 0.018 in ± 0.018 in used
Between no shim and one pitch of the 1/2-28 thread (1/28 in), from the manual's shim chart for 28 threads per inch (71-01-997 Rev E, pages 1 and 5; the copy T.REX ARMS hosts, a copy on file): the midpoint, ± half the range., harvested
The device is timed with shims ("To properly time the indexing tab on the adapter to bottom dead center (BDC) position, a combination of shims may be required"), from a kit of three thicknesses: ".001", ".005", ".020", worth "1/36 Turn", "1/7 Turn", "2/3 Turn" on 28 threads per inch. A whole turn is one pitch, .036: the stack is whatever that barrel needs within it. The value is the middle of that and the ± all of it.
Length ahead of the barrel's shoulder, installed (to the front face; the shims' thickness included)2.718 in ± 0.053 in 69 mmProvisionalWorked out: {.shim_stack} + {.overall_length}
Worked out 2.718 in used
{.shim_stack} + {.overall_length}, harvested
The shims against the shoulder, the device against the shims.
Largest outside diameter (the flange at the rear)0.947 in ± 0.03 in 24.1 mmCorroboratedPhoto: Primary Arms' gallery, WARCOMP-556-1-2-28_02: the device standing, seen square from its underside, on white, 2000 x 1333
Photo 0.947 in ± 0.03 in used
Primary Arms' gallery, WARCOMP-556-1-2-28_02: the device standing, seen square from its underside, on white, 2000 x 1333, harvested
Scale: its own length in the photo, 721 px (rows 297 to 1017), as overall_length (2.7): 267.0 px/in. Read by the silhouette's width row by row at a level of 200 of 255, each section where the width holds within two pixels; widths as read (a black round reads up to 3% thin on white: not corrected), positions from the rear end's row
253 px, 0.0915 to 0.1318 of the length from the rear.
Photo 0.951 in ± 0.03 in
Primary Arms' gallery, WARCOMP-556-1-2-28_03: the device standing, seen square from its right side, the ports to the lens, its underside at the right edge, on white, 2000 x 1333, harvested
Scale: its own length in the photo, 727 px (rows 315 to 1041), as overall_length (2.7): 269.3 px/in. Read by the silhouette's width and its two edges row by row at a level of 200 of 255; hole centres and edges picked by eye on a crop at 1.8 times size (± 3 px there, ± 0.006 in)
256 px.
The view from below, where neither edge is the tab's. The side view agrees to 0.004.
Rear boss (the journal behind the flange), diameter0.678 in ± 0.02 in 17.2 mmProvisionalPhoto: Primary Arms' gallery, WARCOMP-556-1-2-28_02: the device standing, seen square from its underside, on white, 2000 x 1333
Photo 0.678 in ± 0.02 in used
Primary Arms' gallery, WARCOMP-556-1-2-28_02: the device standing, seen square from its underside, on white, 2000 x 1333, harvested
Scale: its own length in the photo, 721 px (rows 297 to 1017), as overall_length (2.7): 267.0 px/in. Read by the silhouette's width row by row at a level of 200 of 255, each section where the width holds within two pixels; widths as read (a black round reads up to 3% thin on white: not corrected), positions from the rear end's row
181 px; the side view has 182.5 of 727, 0.678.
Rear boss, length (rear face to the flange's rear face)0.213 in ± 0.012 in 5.4 mmProvisionalPhoto: Primary Arms' gallery, WARCOMP-556-1-2-28_02: the device standing, seen square from its underside, on white, 2000 x 1333
Photo 0.213 in ± 0.012 in used
Primary Arms' gallery, WARCOMP-556-1-2-28_02: the device standing, seen square from its underside, on white, 2000 x 1333, harvested
Scale: its own length in the photo, 721 px (rows 297 to 1017), as overall_length (2.7): 267.0 px/in. Read by the silhouette's width row by row at a level of 200 of 255, each section where the width holds within two pixels; widths as read (a black round reads up to 3% thin on white: not corrected), positions from the rear end's row
The boss holds its width to 0.0777 of the length; the flange's rounded rear corner begins the next row, and reaches full width at 0.0915. The side view: 0.0812 and 0.0949.
Longer than the 3-prong's (0.167) by about what this device is longer overall.
Flange, length (its rear face to where its front cone begins)0.143 in ± 0.012 in 3.6 mmProvisionalPhoto: Primary Arms' gallery, WARCOMP-556-1-2-28_02: the device standing, seen square from its underside, on white, 2000 x 1333
Photo 0.143 in ± 0.012 in used
Primary Arms' gallery, WARCOMP-556-1-2-28_02: the device standing, seen square from its underside, on white, 2000 x 1333, harvested
Scale: its own length in the photo, 721 px (rows 297 to 1017), as overall_length (2.7): 267.0 px/in. Read by the silhouette's width row by row at a level of 200 of 255, each section where the width holds within two pixels; widths as read (a black round reads up to 3% thin on white: not corrected), positions from the rear end's row
To 0.1318 of the length from the rear (the side view: 0.1334).
Cone ahead of the flange (from the flange's diameter down to the collar's), length0.06 in ± 0.012 in 1.5 mmProvisionalPhoto: Primary Arms' gallery, WARCOMP-556-1-2-28_02: the device standing, seen square from its underside, on white, 2000 x 1333
Photo 0.06 in ± 0.012 in used
Primary Arms' gallery, WARCOMP-556-1-2-28_02: the device standing, seen square from its underside, on white, 2000 x 1333, harvested
Scale: its own length in the photo, 721 px (rows 297 to 1017), as overall_length (2.7): 267.0 px/in. Read by the silhouette's width row by row at a level of 200 of 255, each section where the width holds within two pixels; widths as read (a black round reads up to 3% thin on white: not corrected), positions from the rear end's row
0.1318 to 0.154 of the length: it ends 0.416 from the rear face.
Ported collar (between the flange's cone and the body), diameter0.869 in ± 0.03 in 22.1 mmProvisionalPhoto: Primary Arms' gallery, WARCOMP-556-1-2-28_02: the device standing, seen square from its underside, on white, 2000 x 1333
Photo 0.869 in ± 0.03 in used
Primary Arms' gallery, WARCOMP-556-1-2-28_02: the device standing, seen square from its underside, on white, 2000 x 1333, harvested
Scale: its own length in the photo, 721 px (rows 297 to 1017), as overall_length (2.7): 267.0 px/in. Read by the silhouette's width row by row at a level of 200 of 255, each section where the width holds within two pixels; widths as read (a black round reads up to 3% thin on white: not corrected), positions from the rear end's row
232 px; the side view has 232 of 727, 0.862.
Ported collar, front end, where it steps down to the body (from the rear face)1.019 in ± 0.02 in 25.9 mmProvisionalPhoto: Primary Arms' gallery, WARCOMP-556-1-2-28_02: the device standing, seen square from its underside, on white, 2000 x 1333
Photo 1.019 in ± 0.02 in used
Primary Arms' gallery, WARCOMP-556-1-2-28_02: the device standing, seen square from its underside, on white, 2000 x 1333, harvested
Scale: its own length in the photo, 721 px (rows 297 to 1017), as overall_length (2.7): 267.0 px/in. Read by the silhouette's width row by row at a level of 200 of 255, each section where the width holds within two pixels; widths as read (a black round reads up to 3% thin on white: not corrected), positions from the rear end's row
0.3773 of the length; the side view steps down between 0.3686 and 0.3796.
Wrench flats0CorroboratedPhoto: Primary Arms' gallery, WARCOMP-556-1-2-28_02: the device standing, seen square from its underside, on white, 2000 x 1333
Photo 0 count used
Primary Arms' gallery, WARCOMP-556-1-2-28_02: the device standing, seen square from its underside, on white, 2000 x 1333, harvested
Scale: its own length in the photo, 721 px (rows 297 to 1017), as overall_length (2.7): 267.0 px/in. Read by the silhouette's width row by row at a level of 200 of 255, each section where the width holds within two pixels; widths as read (a black round reads up to 3% thin on white: not corrected), positions from the rear end's row
None: the collar keeps one width from the cone to the body in both views, a quarter turn apart (a flat would step one of them in).
Published “Wrench Flats No (the table's column "SureFire WARCOMP 3-Prong")”
T.REX ARMS, SureFire WARCOMP Flash Hider (one page for the three-prong and the Closed Tine), a seller, read Oct 6, 2026 the page, harvested Oct 6, 2026
Seen on the part's own photos; the seller's table says the same.
It is turned by its tines: the manual lists a "3-Prong Wrench (as applies)" in the box.
Body ahead of the collar, diameter0.839 in ± 0.03 in 21.3 mmProvisionalPhoto: Primary Arms' gallery, WARCOMP-556-1-2-28_02: the device standing, seen square from its underside, on white, 2000 x 1333
Photo 0.839 in ± 0.03 in used
Primary Arms' gallery, WARCOMP-556-1-2-28_02: the device standing, seen square from its underside, on white, 2000 x 1333, harvested
Scale: its own length in the photo, 721 px (rows 297 to 1017), as overall_length (2.7): 267.0 px/in. Read by the silhouette's width row by row at a level of 200 of 255, each section where the width holds within two pixels; widths as read (a black round reads up to 3% thin on white: not corrected), positions from the rear end's row
224 px, from 0.3773 to 0.7739 of the length: one width within two pixels.
Step down in the body (from the rear face)2.09 in ± 0.03 in 53.1 mmProvisionalPhoto: Primary Arms' gallery, WARCOMP-556-1-2-28_02: the device standing, seen square from its underside, on white, 2000 x 1333
Photo 2.09 in ± 0.03 in used
Primary Arms' gallery, WARCOMP-556-1-2-28_02: the device standing, seen square from its underside, on white, 2000 x 1333, harvested
Scale: its own length in the photo, 721 px (rows 297 to 1017), as overall_length (2.7): 267.0 px/in. Read by the silhouette's width row by row at a level of 200 of 255, each section where the width holds within two pixels; widths as read (a black round reads up to 3% thin on white: not corrected), positions from the rear end's row
0.7739 of the length; the side view shows the line there.
Diameter ahead of that step, to the tines' rounded front0.824 in ± 0.03 in 20.9 mmProvisionalPhoto: Primary Arms' gallery, WARCOMP-556-1-2-28_02: the device standing, seen square from its underside, on white, 2000 x 1333
Photo 0.824 in ± 0.03 in used
Primary Arms' gallery, WARCOMP-556-1-2-28_02: the device standing, seen square from its underside, on white, 2000 x 1333, harvested
Scale: its own length in the photo, 721 px (rows 297 to 1017), as overall_length (2.7): 267.0 px/in. Read by the silhouette's width row by row at a level of 200 of 255, each section where the width holds within two pixels; widths as read (a black round reads up to 3% thin on white: not corrected), positions from the rear end's row
220 px, to 0.9709 of the length.
Round of the tines' front outer corner, length along the device0.079 in ± 0.015 in 2 mmProvisionalPhoto: Primary Arms' gallery, WARCOMP-556-1-2-28_02: the device standing, seen square from its underside, on white, 2000 x 1333
Photo 0.079 in ± 0.015 in used
Primary Arms' gallery, WARCOMP-556-1-2-28_02: the device standing, seen square from its underside, on white, 2000 x 1333, harvested
Scale: its own length in the photo, 721 px (rows 297 to 1017), as overall_length (2.7): 267.0 px/in. Read by the silhouette's width row by row at a level of 200 of 255, each section where the width holds within two pixels; widths as read (a black round reads up to 3% thin on white: not corrected), positions from the rear end's row
The last 0.0291 of the length.
Tines3ProvisionalPhoto: Primary Arms' gallery, WARCOMP-556-1-2-28_02: the device standing, seen square from its underside, on white, 2000 x 1333
Photo 3 count used
Primary Arms' gallery, WARCOMP-556-1-2-28_02: the device standing, seen square from its underside, on white, 2000 x 1333, harvested
Scale: its own length in the photo, 721 px (rows 297 to 1017), as overall_length (2.7): 267.0 px/in. Read by the silhouette's width row by row at a level of 200 of 255, each section where the width holds within two pixels; widths as read (a black round reads up to 3% thin on white: not corrected), positions from the rear end's row
The two views cover the turn: from below one tine faces the lens with a slot each side of it; from the right side the outline's top edge is a third slot's (the body reads 217 px there against 224 from below: a slot 0.29 wide at the top). Primary Arms' and Mile High's three-quarter views show three tine ends.
T.REX ARMS calls it the "WARCOMP 3-Prong" beside the Closed Tine.
Slots between the tines, width0.285 in ± 0.025 in 7.2 mmProvisionalPhoto: Primary Arms' gallery, WARCOMP-556-1-2-28_02: the device standing, seen square from its underside, on white, 2000 x 1333
Photo 0.285 in ± 0.025 in used
Primary Arms' gallery, WARCOMP-556-1-2-28_02: the device standing, seen square from its underside, on white, 2000 x 1333, harvested
Scale: its own length in the photo, 721 px (rows 297 to 1017), as overall_length (2.7): 267.0 px/in. Read by the silhouette's width row by row at a level of 200 of 255, each section where the width holds within two pixels; widths as read (a black round reads up to 3% thin on white: not corrected), positions from the rear end's row
The bottom tine's face between its two slots is 144 px wide (edges by eye on a crop, ± 3 px); with the slots 120° either side of the top and the body 224 px across, their walls are that far apart when each slot is 76 px wide. The side view's top edge gives 0.29.
Slots, rear end (from the rear face)1.13 in ± 0.03 in 28.7 mmProvisionalPhoto: Primary Arms' gallery, WARCOMP-556-1-2-28_02: the device standing, seen square from its underside, on white, 2000 x 1333
Photo 1.13 in ± 0.03 in used
Primary Arms' gallery, WARCOMP-556-1-2-28_02: the device standing, seen square from its underside, on white, 2000 x 1333, harvested
Scale: its own length in the photo, 721 px (rows 297 to 1017), as overall_length (2.7): 267.0 px/in. Read by the silhouette's width row by row at a level of 200 of 255, each section where the width holds within two pixels; widths as read (a black round reads up to 3% thin on white: not corrected), positions from the rear end's row
0.420 of the length from below, 0.415 from the side: by eye on the crops.
Slots, round of the corners at their rear end0.04 in ± 0.02 in 1 mmProvisionalPhoto: Primary Arms' gallery, WARCOMP-556-1-2-28_03: the device standing, seen square from its right side, the ports to the lens, its underside at the right edge, on white, 2000 x 1333
Photo 0.04 in ± 0.02 in used
Primary Arms' gallery, WARCOMP-556-1-2-28_03: the device standing, seen square from its right side, the ports to the lens, its underside at the right edge, on white, 2000 x 1333, harvested
Scale: its own length in the photo, 727 px (rows 315 to 1041), as overall_length (2.7): 269.3 px/in. Read by the silhouette's width and its two edges row by row at a level of 200 of 255; hole centres and edges picked by eye on a crop at 1.8 times size (± 3 px there, ± 0.006 in)
A square end with small rounds, by eye.
Ports, rows round the collar2ProvisionalPhoto: Primary Arms' gallery, WARCOMP-556-1-2-28_03: the device standing, seen square from its right side, the ports to the lens, its underside at the right edge, on white, 2000 x 1333
Photo 2 count used
Primary Arms' gallery, WARCOMP-556-1-2-28_03: the device standing, seen square from its right side, the ports to the lens, its underside at the right edge, on white, 2000 x 1333, harvested
Scale: its own length in the photo, 727 px (rows 315 to 1041), as overall_length (2.7): 269.3 px/in. Read by the silhouette's width and its two edges row by row at a level of 200 of 255; hole centres and edges picked by eye on a crop at 1.8 times size (± 3 px there, ± 0.006 in)
Two rows, the holes of one in line with the other's, in every view.
Ports, columns (each a hole in both rows)6ProvisionalPhoto: T.REX ARMS, Surefire-WARCOMP-4: WARCOMP-556-1/2-28 by the NSN lasered on it, standing, seen from its upper right, close, 2560 x 2560
Photo 6 count used
T.REX ARMS, Surefire-WARCOMP-4: WARCOMP-556-1/2-28 by the NSN lasered on it, standing, seen from its upper right, close, 2560 x 2560, harvested
Scale: none: a count. Read by counted across the collar, which shows all of them at once from this side: three columns, a wider land, three columns; then checked on the views that show the rest of the turn
The right side view (0b49401e457d) has the four on that side, the lowest 27° below the level; the view from below (b6910adbb177) has that one near its left edge and none anywhere else: nothing on the lower left. The unseen upper left can hold no seventh unless the pattern is lopsided about its own middle.
Twelve holes in all, in two groups of three columns either side of a plane about 45° to the right of the top when the tab is at the bottom: SureFire's "WARCOMP-556-1/2-28 can be timed for right- or left-handed shooters, or for neutral timing", and the manual's drawing has the tab at the bottom as RIGHT HANDED, the ported arc from 36° left of the top to 121° right of it.
Ports, diameter0.159 in ± 0.012 in 4 mmProvisionalPhoto: Primary Arms' gallery, WARCOMP-556-1-2-28_03: the device standing, seen square from its right side, the ports to the lens, its underside at the right edge, on white, 2000 x 1333
Photo 0.159 in ± 0.012 in used
Primary Arms' gallery, WARCOMP-556-1-2-28_03: the device standing, seen square from its right side, the ports to the lens, its underside at the right edge, on white, 2000 x 1333, harvested
Scale: its own length in the photo, 727 px (rows 315 to 1041), as overall_length (2.7): 269.3 px/in. Read by the silhouette's width and its two edges row by row at a level of 200 of 255; hole centres and edges picked by eye on a crop at 1.8 times size (± 3 px there, ± 0.006 in)
The three holes that face the lens: 74 to 80 px across on the crop, 42.8 px.
Ports, the rear row's centres (from the rear face)0.596 in ± 0.015 in 15.1 mmProvisionalPhoto: Primary Arms' gallery, WARCOMP-556-1-2-28_03: the device standing, seen square from its right side, the ports to the lens, its underside at the right edge, on white, 2000 x 1333
Photo 0.596 in ± 0.015 in used
Primary Arms' gallery, WARCOMP-556-1-2-28_03: the device standing, seen square from its right side, the ports to the lens, its underside at the right edge, on white, 2000 x 1333, harvested
Scale: its own length in the photo, 727 px (rows 315 to 1041), as overall_length (2.7): 269.3 px/in. Read by the silhouette's width and its two edges row by row at a level of 200 of 255; hole centres and edges picked by eye on a crop at 1.8 times size (± 3 px there, ± 0.006 in)
Row 880.6 of the photo, 0.2206 of the length from the rear.
Ports, from the rear row's centres to the front row's0.206 in ± 0.012 in 5.2 mmProvisionalPhoto: Primary Arms' gallery, WARCOMP-556-1-2-28_03: the device standing, seen square from its right side, the ports to the lens, its underside at the right edge, on white, 2000 x 1333
Photo 0.206 in ± 0.012 in used
Primary Arms' gallery, WARCOMP-556-1-2-28_03: the device standing, seen square from its right side, the ports to the lens, its underside at the right edge, on white, 2000 x 1333, harvested
Scale: its own length in the photo, 727 px (rows 315 to 1041), as overall_length (2.7): 269.3 px/in. Read by the silhouette's width and its two edges row by row at a level of 200 of 255; hole centres and edges picked by eye on a crop at 1.8 times size (± 3 px there, ± 0.006 in)
55.6 px: the front row 0.802 from the rear face.
Ports, the middle of their arc, from straight up toward the rifle's right (the tab at the bottom)47° ± 5°ProvisionalPhoto: Primary Arms' gallery, WARCOMP-556-1-2-28_03: the device standing, seen square from its right side, the ports to the lens, its underside at the right edge, on white, 2000 x 1333
Photo 47 deg ± 5 deg used
Primary Arms' gallery, WARCOMP-556-1-2-28_03: the device standing, seen square from its right side, the ports to the lens, its underside at the right edge, on white, 2000 x 1333, harvested
Scale: its own length in the photo, 727 px (rows 315 to 1041), as overall_length (2.7): 269.3 px/in. Read by the silhouette's width and its two edges row by row at a level of 200 of 255; hole centres and edges picked by eye on a crop at 1.8 times size (± 3 px there, ± 0.006 in)
Midway between the two columns either side of the wider land, which the side view has 60° and 25° above the level (the upper one by its two edges near the outline). The manual's drawing has the NEUTRAL timing's tab 48° round from the bottom.
Ports, between the two middle columns (across the wider land)35° ± 5°ProvisionalPhoto: Primary Arms' gallery, WARCOMP-556-1-2-28_03: the device standing, seen square from its right side, the ports to the lens, its underside at the right edge, on white, 2000 x 1333
Photo 35 deg ± 5 deg used
Primary Arms' gallery, WARCOMP-556-1-2-28_03: the device standing, seen square from its right side, the ports to the lens, its underside at the right edge, on white, 2000 x 1333, harvested
Scale: its own length in the photo, 727 px (rows 315 to 1041), as overall_length (2.7): 269.3 px/in. Read by the silhouette's width and its two edges row by row at a level of 200 of 255; hole centres and edges picked by eye on a crop at 1.8 times size (± 3 px there, ± 0.006 in)
Ports, between neighbouring columns within a group26° ± 3°ProvisionalPhoto: Primary Arms' gallery, WARCOMP-556-1-2-28_03: the device standing, seen square from its right side, the ports to the lens, its underside at the right edge, on white, 2000 x 1333
Photo 26 deg ± 3 deg used
Primary Arms' gallery, WARCOMP-556-1-2-28_03: the device standing, seen square from its right side, the ports to the lens, its underside at the right edge, on white, 2000 x 1333, harvested
Scale: its own length in the photo, 727 px (rows 315 to 1041), as overall_length (2.7): 269.3 px/in. Read by the silhouette's width and its two edges row by row at a level of 200 of 255; hole centres and edges picked by eye on a crop at 1.8 times size (± 3 px there, ± 0.006 in)
The three that face the lens: 25° and 27° apart, by their centres' places across the collar.
Indexing tab, width across the device0.136 in ± 0.02 in 3.5 mmProvisionalPhoto: Primary Arms' gallery, WARCOMP-556-1-2-28_02: the device standing, seen square from its underside, on white, 2000 x 1333
Photo 0.136 in ± 0.02 in used
Primary Arms' gallery, WARCOMP-556-1-2-28_02: the device standing, seen square from its underside, on white, 2000 x 1333, harvested
Scale: its own length in the photo, 721 px (rows 297 to 1017), as overall_length (2.7): 267.0 px/in. Read by the silhouette's width row by row at a level of 200 of 255, each section where the width holds within two pixels; widths as read (a black round reads up to 3% thin on white: not corrected), positions from the rear end's row
By eye on a crop at 1.8 times size: the two pockets' round ends are 66.7 px apart centre to centre and 30.6 px across, the tab what is left between them.
Indexing tab, front end (from the rear face)0.468 in ± 0.012 in 11.9 mmProvisionalPhoto: Primary Arms' gallery, WARCOMP-556-1-2-28_03: the device standing, seen square from its right side, the ports to the lens, its underside at the right edge, on white, 2000 x 1333
Photo 0.468 in ± 0.012 in used
Primary Arms' gallery, WARCOMP-556-1-2-28_03: the device standing, seen square from its right side, the ports to the lens, its underside at the right edge, on white, 2000 x 1333, harvested
Scale: its own length in the photo, 727 px (rows 315 to 1041), as overall_length (2.7): 269.3 px/in. Read by the silhouette's width and its two edges row by row at a level of 200 of 255; hole centres and edges picked by eye on a crop at 1.8 times size (± 3 px there, ± 0.006 in)
0.1733 of the length.
From the flange's front to here the tab stands as high as the flange: the side view's right edge stays at the flange's while its left has come in to the collar's.
Pockets either side of the tab, width0.114 in ± 0.015 in 2.9 mmProvisionalPhoto: Primary Arms' gallery, WARCOMP-556-1-2-28_02: the device standing, seen square from its underside, on white, 2000 x 1333
Photo 0.114 in ± 0.015 in used
Primary Arms' gallery, WARCOMP-556-1-2-28_02: the device standing, seen square from its underside, on white, 2000 x 1333, harvested
Scale: its own length in the photo, 721 px (rows 297 to 1017), as overall_length (2.7): 267.0 px/in. Read by the silhouette's width row by row at a level of 200 of 255, each section where the width holds within two pixels; widths as read (a black round reads up to 3% thin on white: not corrected), positions from the rear end's row
30.6 px, by eye on the crop.
Pockets, rear end (from the rear face)0.282 in ± 0.02 in 7.2 mmProvisionalPhoto: Primary Arms' gallery, WARCOMP-556-1-2-28_02: the device standing, seen square from its underside, on white, 2000 x 1333
Photo 0.282 in ± 0.02 in used
Primary Arms' gallery, WARCOMP-556-1-2-28_02: the device standing, seen square from its underside, on white, 2000 x 1333, harvested
Scale: its own length in the photo, 721 px (rows 297 to 1017), as overall_length (2.7): 267.0 px/in. Read by the silhouette's width row by row at a level of 200 of 255, each section where the width holds within two pixels; widths as read (a black round reads up to 3% thin on white: not corrected), positions from the rear end's row
By eye on the crop: they open through the flange's cone into the flange.
Pockets, front end (from the rear face)0.543 in ± 0.02 in 13.8 mmProvisionalPhoto: Primary Arms' gallery, WARCOMP-556-1-2-28_02: the device standing, seen square from its underside, on white, 2000 x 1333
Photo 0.543 in ± 0.02 in used
Primary Arms' gallery, WARCOMP-556-1-2-28_02: the device standing, seen square from its underside, on white, 2000 x 1333, harvested
Scale: its own length in the photo, 721 px (rows 297 to 1017), as overall_length (2.7): 267.0 px/in. Read by the silhouette's width row by row at a level of 200 of 255, each section where the width holds within two pixels; widths as read (a black round reads up to 3% thin on white: not corrected), positions from the rear end's row
By eye on the crop: a round end, in the collar.
Pockets, diameter across their floors, as drawn0.817 in ± 0.02 in 20.8 mmProvisionalWorked out: {surefire-socom-3-prong.pocket_floor_d}
Worked out 0.817 in ± 0.02 in used
{surefire-socom-3-prong.pocket_floor_d}, harvested
NOT SOURCED for this device: neither straight view shows how deep the pockets are. Drawn at the depth the 3-prong's patent shows beside its tab, the two devices' tabs being made for the same suppressors.
Hole through the device ahead of the thread, as drawn0.244 in ± 0.008 in 6.2 mmProvisionalWorked out: {surefire-socom-3-prong.bore_d}
Worked out 0.244 in ± 0.008 in used
{surefire-socom-3-prong.bore_d}, harvested
NOT SOURCED for this device: no view on file looks into either end. Drawn as the 3-prong's, the same maker's device for the same bullet.
The thread it is cut for: major diameter0.496 in ± 0.0033 in 12.6 mmConfirmedStandard: US Army TDP drawing 8448549 (Barrel), sheet 1 of 2, rev J: Section M-M, the muzzle's thread; user-supplied scan, PDF page 213
Standard “1/2-28 UNEF-2A MAJOR DIA .4989/.4924” used
US Army TDP drawing 8448549 (Barrel), sheet 1 of 2, rev J: Section M-M, the muzzle's thread; user-supplied scan, PDF page 213, from the site owner
SureFire's number for it is its thread: WARCOMP-556-1/2-28. The Army barrel's 1/2-28, as the catalog's barrels are drawn.
The thread it is cut for: minor diameter0.455 in ± 0.002 in 11.6 mmConfirmedStandard: US Army TDP drawing 8448549 (Barrel), sheet 1 of 2, rev J: Section M-M, the muzzle's thread; user-supplied scan, PDF page 213
Standard “MINOR DIA .4551 MAX” used
US Army TDP drawing 8448549 (Barrel), sheet 1 of 2, rev J: Section M-M, the muzzle's thread; user-supplied scan, PDF page 213, from the site owner
The thread it is cut for: pitch0.036 in ± 0.00005 in 0.9 mmConfirmedStandard: US Army TDP drawing 8448549 (Barrel), sheet 1 of 2, rev J: Section M-M, the muzzle's thread; user-supplied scan, PDF page 213
Standard “1/2-28 UNEF-2A” used
US Army TDP drawing 8448549 (Barrel), sheet 1 of 2, rev J: Section M-M, the muzzle's thread; user-supplied scan, PDF page 213, from the site owner
Threaded hole's depth from the rear face, as drawn0.69 in ± 0.01 in 17.5 mmConfirmedWorked out: {a2-flash-hider.thread_depth}
Worked out 0.69 in ± 0.01 in used
{a2-flash-hider.thread_depth}, from the site owner
NOT SOURCED for this device: no page, drawing or photo on file shows how deep its thread goes, nor what is inside the ported collar. The manual's Figure 4A has the adapter on shims on the barrel's shoulder, so the hole is at least as deep as the barrel's thread is long. Drawn as deep as the Army compensator's, which the same barrels take: the rear row of ports then lies over its last 0.17 in.
Where a SOCOM suppressor's rear face stands when locked on (from the barrel's shoulder)0.02 in ± 0.03 in 0.5 mmProvisionalWorked out: {surefire-socom556-rc2.seat_ahead_of_device_rear}
Worked out 0.02 in ± 0.03 in used
{surefire-socom556-rc2.seat_ahead_of_device_rear}, harvested
SureFire's manual for its SOCOM suppressors draws the lock ring's rear face a hairline ahead of the barrel's end, with none of the adapter showing behind it (that part's ledger has the reading and what brackets it: the published lengths come to 0.0 on a bare adapter).
Not shown by any source on file for this device alone (its photos are of the device bare; its manual is its installation): the figure is the suppressor's own sources', its manual's drawings of the two locked together. Here, no photo, drawing or sentence on file for this device shows a suppressor on it. The rear end's features, from the rear face: boss to 0.213, flange to 0.356, its front cone to 0.416, the ported collar to 1.019 (the ports' rows centred 0.596 and 0.802, each hole 0.159 across); the indexing tab, as high as the flange, from the flange to 0.468. Each is shim_stack further from the shoulder. The flange is 0.05 further from the rear face than the 3-prong's, and the tines' front the same 2.34 ahead of the flange's front on both (2.32 on the 3-prong).
What it goes with
By the way it mounts, and the figures each part on file states: a part whose figures say it doesn't fit is left out, and one whose fit can't be checked from what is published is marked. A check is against published figures, not a guarantee.
Muzzle thread
- Uppers
- Nordic Components 22RB .22 LR upper, 16", Panzer Arms AR57 ULT Complete AR-15 Upper Receiver - 5.7x28mm - 12", Panzer Arms AR57 Ultra Light Tactical Complete AR-15 Upper Receiver - 5.7x28mm - 16"
- Barrels
- Aero Precision 16" 5.56 CMV barrel, mid-length, BCM Standard 11.5" Carbine Barrel, Stripped, BCM Standard 14.5" Mid Length Barrel, Stripped, BCM Standard 16" Mid Length Barrel, Stripped, Bear Creek Arsenal BC-15 5.56 NATO, 16" Parkerized M4 Barrel, 1:7 Twist, Mid-Length Gas System, Daniel Defense CHF Chrome Lined 5.56 AR-15 Barrel - Carbine - Government - 10.3", Faxon Firearms Duty Series Pencil Profile 16" Mid-Length 5.56 NATO AR15 Barrel, Geissele Automatics CHF Chrome Lined Barrel - 5.56 - 13.9", Geissele Automatics CHF Chrome Lined Barrel - 5.56 - 14.5", Geissele Automatics CHF Chrome Lined Barrel - 5.56 - 16", Rosco Manufacturing Bloodline 10.5" M4 5.56 NATO, Rosco Manufacturing Bloodline 11.5" M4 5.56 NATO, Rosco Manufacturing Bloodline 12.5" M4 5.56 NATO
- Barrels
- Taurus TX22 4.6 in Threaded Barrel
Suppressor mount
- Suppressors
- SureFire SOCOM556-RC2
Prices on file
Each seller's latest reading of its own page: before tax and shipping, and not a quote. The pages are read again every night.
- Primary Arms $152.00 Nov 21, 2026, in stock that day
- T.REX ARMS $152.00 Nov 21, 2026, in stock that day
- Mile High Shooting Accessories $152.00 Nov 21, 2026, in stock that day