Barrel
Geissele Automatics CHF Chrome Lined Barrel - 5.56 - 14.5"
Geissele's 14.5 in cold-hammer-forged 5.56 barrel, stripped, in its taper profile: chrome lined, 1:7 twist, manganese phosphate, a mid-length gas port (.076) on a .750 in journal with a dimple under it for a gas block's set screw, an M4 feed ramp extension, a 1/2 x 28 muzzle thread. Sellers' pages: "This cold hammer-forged 14.5" barrel features a Geissele Taper Profile and mid-length gas system" (Primary Arms); "Geissele barrels are High Pressure Tested (HPT) and Magnetic Particle Inspected (MPI)" (Mile High). Its steel is stated three ways: "Chrome moly vanadium steel" (Primary Arms' features, Mile High, Rooftop Defense), "Barrel Material 4140 Chrome Moly Steel" (Primary Arms' table) and, for a listing under another number, "4150 CMV Steel" (Charlie's Custom Clones, 05-1861).

- Weight
- 25.6 oz ± 0.8 oz Corroboratedpublished: Primary Arms, Geissele Automatics CHF Chrome Lined 5.56 AR-15 Barrel - Mid-Length - Tapered - 14.5" (05-2985), Features; its Specifications: "Weight 1.6 lbs", a seller, read Oct 6, 2026
- Lowest price
- $365.00 at Mile High Shooting Accessories, read Nov 21, 2026
- Made for
- Chambered in 5.56 NATO
- Maker's number
- 05-2985
- Colour
- Geissele manganese phosphate (barrels)
- Drawn as
- modelled
- Maker's page
- primaryarms.com
In “Aero 5.56 carbine”, a build on the start page, in place of its Aero Precision 16" 5.56 CMV barrel, mid-length.
Its figures
Every figure the site draws and checks it by, with where it came from. Open one for each source's reading, and why one is used where they differ.
Barrel length as its sellers state it for the maker14.5 in ± 0.05 in 368.3 mmCorroboratedPublished: Primary Arms, Geissele Automatics CHF Chrome Lined 5.56 AR-15 Barrel - Mid-Length - Tapered - 14.5" (05-2985), Specifications; its Features: "14.5\" cold hammer-forged barrel", a seller, read Oct 6, 2026
Published “Barrel Length 14.5” used
Primary Arms, Geissele Automatics CHF Chrome Lined 5.56 AR-15 Barrel - Mid-Length - Tapered - 14.5" (05-2985), Specifications; its Features: "14.5\" cold hammer-forged barrel", a seller, read Oct 6, 2026 the page, harvested Oct 6, 2026
Published “LENGTH: 14.5"”
Mile High Shooting Accessories, Geissele: CHF, Chrome Lined Barrel, 5.56 - 14.5" (SKU 05-2985), Specifications, a seller, read Oct 6, 2026 the page, harvested Oct 6, 2026
Published “Length: 14.5″”
Rooftop Defense, Geissele Automatics 14.5" 5.56 Hammer-Forged Midlength Barrel (Geissele Part Number 05-2985), Specifications, a seller, read Oct 6, 2026 the page, harvested Oct 6, 2026
Three sellers' pages state the one length; none is the maker's own page, which isn't read.
The nominal length: what the site's federal-law line goes by. No page says between which points; the Army's barrel drawing (8448549) dimensions a barrel from its breech end, inside the extension, to its muzzle, and overall_length takes it so. Under 16 in.
The gas block journal's diameter0.75 in ± 0.0005 in 19 mmCorroboratedPublished: Primary Arms, Geissele Automatics CHF Chrome Lined 5.56 AR-15 Barrel - Mid-Length - Tapered - 14.5" (05-2985), Specifications, a seller, read Oct 6, 2026
Published “Gas Seat Diameter .750” used
Primary Arms, Geissele Automatics CHF Chrome Lined 5.56 AR-15 Barrel - Mid-Length - Tapered - 14.5" (05-2985), Specifications, a seller, read Oct 6, 2026 the page, harvested Oct 6, 2026
Published “GAS BLOCK DIAMETER: .750”
Mile High Shooting Accessories, Geissele: CHF, Chrome Lined Barrel, 5.56 - 14.5" (SKU 05-2985), Specifications, a seller, read Oct 6, 2026 the page, harvested Oct 6, 2026
Published “Gas Block Journal Diameter: 0.750″”
Rooftop Defense, Geissele Automatics 14.5" 5.56 Hammer-Forged Midlength Barrel (Geissele Part Number 05-2985), Specifications, a seller, read Oct 6, 2026 the page, harvested Oct 6, 2026
Three sellers' pages state the one diameter; none is the maker's own page.
The gas port's diameter0.076 in ± 0.0005 in 1.9 mmCorroboratedPublished: Mile High Shooting Accessories, Geissele: CHF, Chrome Lined Barrel, 5.56 - 14.5" (SKU 05-2985), Specifications, a seller, read Oct 6, 2026
Published “GAS PORT: .076” used
Mile High Shooting Accessories, Geissele: CHF, Chrome Lined Barrel, 5.56 - 14.5" (SKU 05-2985), Specifications, a seller, read Oct 6, 2026 the page, harvested Oct 6, 2026
Published “Gas Port: 0.076″”
Rooftop Defense, Geissele Automatics 14.5" 5.56 Hammer-Forged Midlength Barrel (Geissele Part Number 05-2985), Specifications, a seller, read Oct 6, 2026 the page, harvested Oct 6, 2026
Two sellers' pages state the one figure.
Published for this number (the 13.9 in sibling's is .081, the 12.5 in carbine-gas sibling's .070 on the same sellers' pages).
The barrel extension's rear end behind the barrel's breech end0.501 in ± 0.01 in 12.7 mmProvisionalWorked out: {std.ar15.barrel_extension_behind_breech}
Worked out 0.501 in ± 0.01 in used
{std.ar15.barrel_extension_behind_breech}, from the site owner
The standard's (the reference CAD set's extension less the Army's .620 tenon: std.ar15.barrel_extension_length, std.ar15.barrel_tenon_length), as the catalog's 16 in barrels take it: Mile High and Primary Arms state an M4 extension ("BARREL EXTENSION: M4 Feedramps"; "Feed Ramps M4") and nothing of its size.
End to end, the extension's rear to the muzzle15.001 in ± 0.07 in 381 mmProvisionalWorked out: {.length} + {.extension_behind_breech}
Photo 14.91 in ± 0.06 in
Primary Arms' gallery, 05-2985_02: the barrel level on white, the muzzle at the left, the gas block's dimple toward the lens, 2200 x 1467, harvested
Scale: the traced outline's scale: its flange's diameter (flange_od, itself read against the published .750 journal), 133.6 px/in. Read by its two end faces, each behind its rim's arc (tools/trace.py, the seed's `ends` spec: outline_front_face 14.979 less outline_rear_face 0.069), 1992.0 px. A second fit of the two arcs, on the photo's own rows at grey 235, has the faces at columns 103.7 and 2094.8 (1991.2 px, 14.885 at 133.77 px/in): the muzzle's rim seen from 13.5° off square, the extension's rear from 8.6°
Worked out 15.001 in ± 0.07 in used
{.length} + {.extension_behind_breech}, harvested
Lengths at the published length's scale, as the catalog's other barrels: at that scale the dimple under the gas port lands 9.17 ahead of the receiver's face, where Aero's mid-length port is (9.17) and a mid-length chart's (9.18), and the thread comes out 0.62 long (the Army's .63).
The photo, at its journal's scale with the silhouette read at grey 235, has the two end faces 0.6% nearer than the published length gives (at grey 200, 0.2% further: where a black part's lit edge is taken to end moves its diameters by a pixel in a hundred). The published length is the scale for lengths, the journal the scale for diameters. The difference is near what a length taken from the bolt's face, an eighth behind the breech end, would make it (14.876): no page says which the 14.5 is, and the ± covers it.
The barrel extension's rear end, from the flange's rear face (negative: inside the receiver)-1.001 in ± 0.02 in -25.4 mmProvisionalPhoto: Primary Arms' gallery, 05-2985_02: the barrel level on white, the muzzle at the left, the gas block's dimple toward the lens, 2200 x 1467
Photo -1.001 in ± 0.02 in used
Primary Arms' gallery, 05-2985_02: the barrel level on white, the muzzle at the left, the gas block's dimple toward the lens, 2200 x 1467, harvested
Scale: its end faces, 1992.0 px apart (columns 103.5 and 2095.5, each behind its rim's arc: outline_front_face and outline_rear_face, tools/trace.py's fit), as overall_length (15.001): 132.79 px/in. Read by the rear end's face (column 2095.5, behind its rim's arc; a second fit of the arc on the photo's own rows has 2094.8) to the flange's rear face (column 1962.5: the silhouette's edge between the flange's rim and the extension's body is the flange's rear rim seen from 7° off square, and columns 1963 to 1967 each put the face there within a pixel)
The reference CAD set's extension has 0.990 here (1.121 less its 0.131 flange); BCM's barrel's photo 0.984.
The extension flange's front face, ahead of its rear face (the flange's thickness)0.117 in ± 0.015 in 3 mmProvisionalPhoto: Primary Arms' gallery, 05-2985_02: the barrel level on white, the muzzle at the left, the gas block's dimple toward the lens, 2200 x 1467
Photo 0.117 in ± 0.015 in used
Primary Arms' gallery, 05-2985_02: the barrel level on white, the muzzle at the left, the gas block's dimple toward the lens, 2200 x 1467, harvested
Scale: its end faces, 1992.0 px apart (columns 103.5 and 2095.5, each behind its rim's arc: outline_front_face and outline_rear_face, tools/trace.py's fit), as overall_length (15.001): 132.79 px/in. Read by the flange's rear face (column 1962.5) to its front face (column 1946.9: the front rim's far arc, columns 1942 to 1946, each within half a pixel of it)
The reference CAD set's flange is 0.131 thick (std.ar15.barrel_extension_flange_thickness); BCM's barrel's reads 0.095. The silhouette's corners (columns 1942.9 and 1966.8 at half height, 0.18 in apart) are the two rims' arcs.
The barrel extension's flange, its diameter as the side photo has it at the journal's scale1.168 in ± 0.007 in 29.7 mmProvisionalPhoto: Primary Arms' gallery, 05-2985_02: the barrel level on white, the muzzle at the left, the gas block's dimple toward the lens, 2200 x 1467
Photo 1.168 in ± 0.007 in used
Primary Arms' gallery, 05-2985_02: the barrel level on white, the muzzle at the left, the gas block's dimple toward the lens, 2200 x 1467, harvested
Scale: its gas block journal's diameter as the published .750 (the silhouette at grey 235: 50.16 px of radius over columns 655 to 770). Read by the silhouette's widest, columns 1950 to 1960: 78.10 px of radius against the journal's 50.16 (tools/turned.py at 235 has the ratio 1.5582: 1.169)
The scale reference of the traced outline (the silhouette's greatest height). The reference CAD set's is 1.170.
The barrel extension's body, its diameter (what goes into the receiver)0.999 in ± 0.001 in 25.4 mmProvisionalWorked out: {bcm-16-mid-barrel.extension_od}
Worked out 0.999 in ± 0.001 in used
{bcm-16-mid-barrel.extension_od}, from the site owner
The Army's limit on the assembly drawing (8448548: "DIAMETER NOT TO EXCEED .9990 FOR THIS LENGTH AFTER ASSEMBLY AND BEFORE FINISH"), as read for BCM's barrel's ledger, where the drawing and its page are cited.
Photo 1 in ± 0.007 in
Primary Arms' gallery, 05-2985_02: the barrel level on white, the muzzle at the left, the gas block's dimple toward the lens, 2200 x 1467, harvested
Scale: its gas block journal's diameter as the published .750 (the silhouette at grey 235: 50.16 px of radius over columns 655 to 770). Read by the extension's body, columns 2010 to 2085: 66.87 px of radius against the journal's 50.16 (0.9998)
The drawing's limit: an extension over 1.000 doesn't go into a receiver. The photo reads the same within a thousandth.
The photo agrees with the Army's limit, which says the photo's two ends are at one scale (no yaw to speak of): the journal is 9 in from the extension.
The chamber section's diameter, ahead of the flange0.983 in ± 0.007 in 25 mmProvisionalPhoto: Primary Arms' gallery, 05-2985_02: the barrel level on white, the muzzle at the left, the gas block's dimple toward the lens, 2200 x 1467
Photo 0.983 in ± 0.007 in used
Primary Arms' gallery, 05-2985_02: the barrel level on white, the muzzle at the left, the gas block's dimple toward the lens, 2200 x 1467, harvested
Scale: its gas block journal's diameter as the published .750 (the silhouette at grey 235: 50.16 px of radius over columns 655 to 770). Read by columns 1850 to 1930: 65.74 px of radius against the journal's 50.16
A plain cylinder from the flange's front face to chamber_front_x (it rises by 0.3 px of radius along its length).
Where the chamber section ends and the barrel begins to narrow, ahead of the extension's face0.962 in ± 0.03 in 24.4 mmProvisionalPhoto: Primary Arms' gallery, 05-2985_02: the barrel level on white, the muzzle at the left, the gas block's dimple toward the lens, 2200 x 1467
Photo 0.962 in ± 0.03 in used
Primary Arms' gallery, 05-2985_02: the barrel level on white, the muzzle at the left, the gas block's dimple toward the lens, 2200 x 1467, harvested
Scale: its end faces, 1992.0 px apart (columns 103.5 and 2095.5, each behind its rim's arc: outline_front_face and outline_rear_face, tools/trace.py's fit), as overall_length (15.001): 132.79 px/in. Read by the flange's rear face (column 1962.5) to where a line through the chamber section's radius (columns 1850 to 1930) meets a line through the cone's (columns 1680 to 1830): column 1834.7
Where the cone ahead of the chamber ends and the long taper begins, ahead of the extension's face2.334 in ± 0.04 in 59.3 mmProvisionalPhoto: Primary Arms' gallery, 05-2985_02: the barrel level on white, the muzzle at the left, the gas block's dimple toward the lens, 2200 x 1467
Photo 2.334 in ± 0.04 in used
Primary Arms' gallery, 05-2985_02: the barrel level on white, the muzzle at the left, the gas block's dimple toward the lens, 2200 x 1467, harvested
Scale: its end faces, 1992.0 px apart (columns 103.5 and 2095.5, each behind its rim's arc: outline_front_face and outline_rear_face, tools/trace.py's fit), as overall_length (15.001): 132.79 px/in. Read by the flange's rear face (column 1962.5) to where a line through the cone's radius (columns 1680 to 1830) meets a line through the long taper's (columns 900 to 1600): column 1652.6
The cone falls 0.129 in of radius in 1.37 in of length (5.3°), straight within half a pixel.
The long taper's diameter at its rear end (the Geissele Taper Profile's thick end)0.725 in ± 0.007 in 18.4 mmProvisionalPhoto: Primary Arms' gallery, 05-2985_02: the barrel level on white, the muzzle at the left, the gas block's dimple toward the lens, 2200 x 1467
Photo 0.725 in ± 0.007 in used
Primary Arms' gallery, 05-2985_02: the barrel level on white, the muzzle at the left, the gas block's dimple toward the lens, 2200 x 1467, harvested
Scale: its gas block journal's diameter as the published .750 (the silhouette at grey 235: 50.16 px of radius over columns 655 to 770). Read by the two lines' crossing at column 1652.6: 48.48 px of radius against the journal's 50.16 (the silhouette itself has 48.34 over columns 1630 to 1650: 0.723)
Where the long taper ends and the barrel flares to the gas block's collar, ahead of the extension's face8.306 in ± 0.04 in 211 mmProvisionalPhoto: Primary Arms' gallery, 05-2985_02: the barrel level on white, the muzzle at the left, the gas block's dimple toward the lens, 2200 x 1467
Photo 8.306 in ± 0.04 in used
Primary Arms' gallery, 05-2985_02: the barrel level on white, the muzzle at the left, the gas block's dimple toward the lens, 2200 x 1467, harvested
Scale: its end faces, 1992.0 px apart (columns 103.5 and 2095.5, each behind its rim's arc: outline_front_face and outline_rear_face, tools/trace.py's fit), as overall_length (15.001): 132.79 px/in. Read by the flange's rear face (column 1962.5) to where a line through the long taper's radius (columns 900 to 1600) meets a line through the flare's (columns 815 to 855): column 859.5
Between the two the barrel narrows from 0.725 to 0.663 in 5.98 in: 0.0052 px of radius a pixel, one straight line within a quarter of a pixel (0.002 in) over 700 columns, read on both edges. This is the profile the sellers call "Geissele Taper Profile": no cylinder between the chamber and the gas block.
The long taper's diameter at its front end (the barrel's thinnest behind the gas block)0.663 in ± 0.007 in 16.8 mmProvisionalPhoto: Primary Arms' gallery, 05-2985_02: the barrel level on white, the muzzle at the left, the gas block's dimple toward the lens, 2200 x 1467
Photo 0.663 in ± 0.007 in used
Primary Arms' gallery, 05-2985_02: the barrel level on white, the muzzle at the left, the gas block's dimple toward the lens, 2200 x 1467, harvested
Scale: its gas block journal's diameter as the published .750 (the silhouette at grey 235: 50.16 px of radius over columns 655 to 770). Read by the two lines' crossing at column 859.5: 44.34 px of radius against the journal's 50.16 (the silhouette itself has 44.33 over columns 875 to 895)
The collar behind the gas block journal, its diameter0.844 in ± 0.007 in 21.4 mmProvisionalPhoto: Primary Arms' gallery, 05-2985_02: the barrel level on white, the muzzle at the left, the gas block's dimple toward the lens, 2200 x 1467
Photo 0.844 in ± 0.007 in used
Primary Arms' gallery, 05-2985_02: the barrel level on white, the muzzle at the left, the gas block's dimple toward the lens, 2200 x 1467, harvested
Scale: its gas block journal's diameter as the published .750 (the silhouette at grey 235: 50.16 px of radius over columns 655 to 770). Read by columns 788 to 802: 56.41 px of radius against the journal's 50.16 (0.8435; tools/turned.py: 0.844)
A gas block's rear face comes back to its front face. Its rear side isn't a face: it flares down to the taper over 0.44 in, a concave curve.
Where the collar's full diameter ends, ahead of the extension's face8.743 in ± 0.03 in 222.1 mmProvisionalPhoto: Primary Arms' gallery, 05-2985_02: the barrel level on white, the muzzle at the left, the gas block's dimple toward the lens, 2200 x 1467
Photo 8.743 in ± 0.03 in used
Primary Arms' gallery, 05-2985_02: the barrel level on white, the muzzle at the left, the gas block's dimple toward the lens, 2200 x 1467, harvested
Scale: its end faces, 1992.0 px apart (columns 103.5 and 2095.5, each behind its rim's arc: outline_front_face and outline_rear_face, tools/trace.py's fit), as overall_length (15.001): 132.79 px/in. Read by the flange's rear face (column 1962.5) to the last column at the collar's full radius (801: 56.3 px, 56.1 at 802 and falling)
The gas block journal's rear shoulder (the collar's front face) ahead of the extension's face8.882 in ± 0.03 in 225.6 mmProvisionalPhoto: Primary Arms' gallery, 05-2985_02: the barrel level on white, the muzzle at the left, the gas block's dimple toward the lens, 2200 x 1467
Photo 8.882 in ± 0.03 in used
Primary Arms' gallery, 05-2985_02: the barrel level on white, the muzzle at the left, the gas block's dimple toward the lens, 2200 x 1467, harvested
Scale: its end faces, 1992.0 px apart (columns 103.5 and 2095.5, each behind its rim's arc: outline_front_face and outline_rear_face, tools/trace.py's fit), as overall_length (15.001): 132.79 px/in. Read by the flange's rear face (column 1962.5) to the collar's front face (column 783.0: the silhouette's step is at 781.2 at half height, 2 px toward the muzzle by its rim's arc, the lens being 6° toward the breech from there; on the near side the face shows as a dark line at columns 777 to 778, the same face 6 px out by the same arc)
A gas block's rear face comes back to this shoulder. The catalog's 16 in mid-length barrels have it at 8.85 to 8.87.
The gas port ahead of the extension's face9.168 in ± 0.04 in 232.9 mmCorroboratedPhoto: Primary Arms' gallery, 05-2985_02: the barrel level on white, the muzzle at the left, the gas block's dimple toward the lens, 2200 x 1467
Photo 9.168 in ± 0.04 in used
Primary Arms' gallery, 05-2985_02: the barrel level on white, the muzzle at the left, the gas block's dimple toward the lens, 2200 x 1467, harvested
Scale: its end faces, 1992.0 px apart (columns 103.5 and 2095.5, each behind its rim's arc: outline_front_face and outline_rear_face, tools/trace.py's fit), as overall_length (15.001): 132.79 px/in. Read by the flange's rear face (column 1962.5) to the dimple's centre: seen at column 740.7, row 759 (33 px under the axis: 42° round from the lens), which on the journal's near side is 4.3 px toward the muzzle of its station (the lens stands 6.5° toward the breech from there): column 745.0
Photo 9.16 in ± 0.04 in
Rooftop Defense's picture, Geissele-14.5.jpg: a rendering of the barrel from above, the extension at the left, the index pin, the port and the G toward the viewer, 1080 x 1080, harvested
Scale: its own length, 1010 px between its ends as overall_length (15.001): 67 px/in. Read by the port's own centre, 18.8 px (0.28 in) ahead of the collar's front face, added to journal_rear_x (8.882)
The port itself, on a picture of a third of the photo's resolution: it is where the dimple is, within what either reads.
The photograph of the barrel, at twice the rendering's resolution; the rendering puts the port itself within 0.01 in of the dimple's station.
Read at the dimple under the journal, which is what Primary Arms' side photo shows (the barrel lies with its underside toward the lens: a spot-drilled hole 0.16 in across with a coned floor (dimple_d), twice the published .076 port; Mile High: "There is one dimple machined in for a gas block set screw"; a buyer on Primary Arms' page: "it also has an indexing notch on the top and a dimple to help locate a gas block"). The port is on top, opposite: Primary Arms' three-quarter photo (7f3cd09611e9) and Rooftop's picture (701c31f17604) show it small, just ahead of the collar, in line with the collar's notch and the index pin. That the port is at the dimple's station is taken, not read on this photo: a gas block's set screw is under its gas hole. Two pictures have the port itself there: Rooftop's rendering of this number (the second reading below), and Primary Arms' photo of the 13.9 in barrel, which lies port upward (0.29 in ahead of its collar: geissele-139-chf-barrel.gas_port_x). Checks: the port is 0.29 ahead of the journal's rear shoulder (BCM's 0.28, a mid-length chart's .300); Aero's mid-length port is at 9.17, BCM's 9.13, Bear Creek's 9.14, the chart's 9.18: mid-length by the photo as by the sellers' word.
The gas block journal's front end (where the barrel begins to narrow) ahead of the extension's face9.93 in ± 0.03 in 252.2 mmProvisionalPhoto: Primary Arms' gallery, 05-2985_02: the barrel level on white, the muzzle at the left, the gas block's dimple toward the lens, 2200 x 1467
Photo 9.93 in ± 0.03 in used
Primary Arms' gallery, 05-2985_02: the barrel level on white, the muzzle at the left, the gas block's dimple toward the lens, 2200 x 1467, harvested
Scale: its end faces, 1992.0 px apart (columns 103.5 and 2095.5, each behind its rim's arc: outline_front_face and outline_rear_face, tools/trace.py's fit), as overall_length (15.001): 132.79 px/in. Read by the flange's rear face (column 1962.5) to where a line through the journal's radius (columns 650 to 770) meets a line through the cone's ahead of it (columns 570 to 640): column 643.9
The journal is 1.05 long. Ahead of it the barrel narrows to the muzzle section over 0.62 in, a cone (no step).
Where the cone ahead of the journal ends and the muzzle section begins, ahead of the extension's face10.545 in ± 0.04 in 267.8 mmProvisionalPhoto: Primary Arms' gallery, 05-2985_02: the barrel level on white, the muzzle at the left, the gas block's dimple toward the lens, 2200 x 1467
Photo 10.545 in ± 0.04 in used
Primary Arms' gallery, 05-2985_02: the barrel level on white, the muzzle at the left, the gas block's dimple toward the lens, 2200 x 1467, harvested
Scale: its end faces, 1992.0 px apart (columns 103.5 and 2095.5, each behind its rim's arc: outline_front_face and outline_rear_face, tools/trace.py's fit), as overall_length (15.001): 132.79 px/in. Read by the flange's rear face (column 1962.5) to where a line through the cone's radius (columns 570 to 640) meets a line through the muzzle section's (columns 240 to 460): column 562.2
The muzzle section's diameter, between the cone ahead of the journal and the ring behind the shoulder0.666 in ± 0.007 in 16.9 mmProvisionalPhoto: Primary Arms' gallery, 05-2985_02: the barrel level on white, the muzzle at the left, the gas block's dimple toward the lens, 2200 x 1467
Photo 0.666 in ± 0.007 in used
Primary Arms' gallery, 05-2985_02: the barrel level on white, the muzzle at the left, the gas block's dimple toward the lens, 2200 x 1467, harvested
Scale: its gas block journal's diameter as the published .750 (the silhouette at grey 235: 50.16 px of radius over columns 655 to 770). Read by columns 240 to 460: 44.54 px of radius against the journal's 50.16
A cylinder 2.5 in long (it changes by 0.14 px of radius along its length).
The rear end of the ring behind the muzzle shoulder, ahead of the extension's face13.141 in ± 0.03 in 333.8 mmProvisionalPhoto: Primary Arms' gallery, 05-2985_02: the barrel level on white, the muzzle at the left, the gas block's dimple toward the lens, 2200 x 1467
Photo 13.141 in ± 0.03 in used
Primary Arms' gallery, 05-2985_02: the barrel level on white, the muzzle at the left, the gas block's dimple toward the lens, 2200 x 1467, harvested
Scale: its end faces, 1992.0 px apart (columns 103.5 and 2095.5, each behind its rim's arc: outline_front_face and outline_rear_face, tools/trace.py's fit), as overall_length (15.001): 132.79 px/in. Read by the flange's rear face (column 1962.5) to the last column at the ring's full radius (217: 46.7 px; 46.6 at 218 and falling to 44.6 at 229)
The ring is 0.24 long at its full diameter and comes down to the muzzle section over another 0.1 in (columns 218 to 232), a chamfer and not a step.
Where the ring's rear chamfer meets the muzzle section, ahead of the extension's face13.04 in ± 0.03 in 331.2 mmProvisionalPhoto: Primary Arms' gallery, 05-2985_02: the barrel level on white, the muzzle at the left, the gas block's dimple toward the lens, 2200 x 1467
Photo 13.04 in ± 0.03 in used
Primary Arms' gallery, 05-2985_02: the barrel level on white, the muzzle at the left, the gas block's dimple toward the lens, 2200 x 1467, harvested
Scale: its end faces, 1992.0 px apart (columns 103.5 and 2095.5, each behind its rim's arc: outline_front_face and outline_rear_face, tools/trace.py's fit), as overall_length (15.001): 132.79 px/in. Read by the flange's rear face (column 1962.5) to the first column at the muzzle section's radius behind the ring (231: 44.6 px, as at 235)
The muzzle shoulder ahead of the extension's face13.381 in ± 0.03 in 339.9 mmProvisionalPhoto: Primary Arms' gallery, 05-2985_02: the barrel level on white, the muzzle at the left, the gas block's dimple toward the lens, 2200 x 1467
Photo 13.381 in ± 0.03 in used
Primary Arms' gallery, 05-2985_02: the barrel level on white, the muzzle at the left, the gas block's dimple toward the lens, 2200 x 1467, harvested
Scale: its end faces, 1992.0 px apart (columns 103.5 and 2095.5, each behind its rim's arc: outline_front_face and outline_rear_face, tools/trace.py's fit), as overall_length (15.001): 132.79 px/in. Read by the flange's rear face (column 1962.5) to the shoulder's face (column 185.7: the silhouette's step is at 180.5 at half height, 5 px toward the muzzle by the ring's rim's arc, the lens being 13° toward the breech from there; columns 181 to 184 each put the face at 185.4 to 185.9)
Where the thread begins: a muzzle device or its washer seats here, on the ring's front face.
The muzzle thread's length0.619 in ± 0.03 in 15.7 mmProvisionalPhoto: Primary Arms' gallery, 05-2985_02: the barrel level on white, the muzzle at the left, the gas block's dimple toward the lens, 2200 x 1467
Photo 0.619 in ± 0.03 in used
Primary Arms' gallery, 05-2985_02: the barrel level on white, the muzzle at the left, the gas block's dimple toward the lens, 2200 x 1467, harvested
Scale: its end faces, 1992.0 px apart (columns 103.5 and 2095.5, each behind its rim's arc: outline_front_face and outline_rear_face, tools/trace.py's fit), as overall_length (15.001): 132.79 px/in. Read by the shoulder's face (column 185.7) to the muzzle's face (column 103.5, behind its rim's 7 px arc)
The Army's barrel has .63 here (8448549 sheet 1, from the shoulder to the muzzle); a mid-length chart .624.
The diameter behind the muzzle thread0.699 in ± 0.007 in 17.8 mmProvisionalPhoto: Primary Arms' gallery, 05-2985_02: the barrel level on white, the muzzle at the left, the gas block's dimple toward the lens, 2200 x 1467
Photo 0.699 in ± 0.007 in used
Primary Arms' gallery, 05-2985_02: the barrel level on white, the muzzle at the left, the gas block's dimple toward the lens, 2200 x 1467, harvested
Scale: its gas block journal's diameter as the published .750 (the silhouette at grey 235: 50.16 px of radius over columns 655 to 770). Read by columns 190 to 214: 46.73 px of radius against the journal's 50.16 (0.6986)
The ring behind the shoulder, a quarter of an inch long; the muzzle section behind it is 0.666 (muzzle_run_od). Rooftop's picture of the barrel (701c31f17604) shows the same ring, with Geissele's G just behind it.
The bore's diameter (across the lands)0.219 in ± 0.001 in 5.6 mmConfirmedWorked out: {bcm-16-mid-barrel.bore_d}
Worked out 0.219 in ± 0.001 in used
{bcm-16-mid-barrel.bore_d}, from the site owner
The Army's barrel drawing (8448549 sheet 2, Section U-U: ".219 DIA+.001"), as read for BCM's barrel's ledger, where the drawing and its page are cited.
The cartridge's, for the hole the model cuts: the sellers state "Chambered in 5.56 NATO" and no bore.
The barrel indexing pin's diameter0.125 in ± 0.00025 in 3.2 mmConfirmedWorked out: {bca-556-16-mid-barrel.index_pin_d}
Worked out 0.12525 in ± 0.00025 in used
{bca-556-16-mid-barrel.index_pin_d}, from the site owner
The Army's own part (8448551, Pin, Barrel Indexing: ".1255 DIA -.0005"), as read for Bear Creek's barrel's ledger, where the drawing and its page are cited.
The barrel indexing pin's top above the extension's surface0.094 in ± 0.01 in 2.4 mmConfirmedWorked out: {bca-556-16-mid-barrel.index_pin_protrusion}
Worked out 0.094 in ± 0.01 in used
{bca-556-16-mid-barrel.index_pin_protrusion}, from the site owner
The Army's assembly drawing (8448548, Section A-A: ".094 MAX"), as read for Bear Creek's barrel's ledger, where the drawing and its page are cited.
A limit, and the model draws the pin at it. No photo of this barrel has the pin on its silhouette.
The barrel indexing pin's axis behind the flange's rear face0.063 in ± 0.025 in 1.6 mmProvisionalPhoto: Rooftop Defense's picture, Geissele-14.5.jpg: a rendering of the barrel from above, the extension at the left, the index pin, the port and the G toward the viewer, 1080 x 1080
Photo 0.063 in ± 0.025 in used
Rooftop Defense's picture, Geissele-14.5.jpg: a rendering of the barrel from above, the extension at the left, the index pin, the port and the G toward the viewer, 1080 x 1080, harvested
Scale: its own length, 1010 px between its ends as overall_length (15.001): 67 px/in. Read by the pin's round outline, 8 px across, touches the flange's rear face: its axis half its diameter (index_pin_d) behind the face. Primary Arms' photos have the pin on the far side
The pin stands against the flange, in line with the gas port and the collar's notch.
The barrel extension's rear opening, its diameter at the rear face0.77 in ± 0.005 in 19.6 mmProvisionalWorked out: {bcm-16-mid-barrel.extension_mouth_d}
Worked out 0.77 in ± 0.005 in used
{bcm-16-mid-barrel.extension_mouth_d}, from the site owner
The inside of a mil-spec M4 extension as the reference CAD set has it, for how the rear end looks (the sellers: "BARREL EXTENSION: M4 Feedramps"; two sellers' photos of this barrel's breech, ba2bd32ed9c1 and 5acd733fbeb8, show the lugs and the ramps). Appearance only; the six figures of the opening are the readings made for BCM's barrel's ledger, where the file and the method are cited.
The rear opening's chamfer, its depth (at 45°, also how far it narrows the opening's radius)0.045 in ± 0.005 in 1.1 mmProvisionalWorked out: {bcm-16-mid-barrel.extension_mouth_chamfer}
Worked out 0.045 in ± 0.005 in used
{bcm-16-mid-barrel.extension_mouth_chamfer}, from the site owner
The circle the extension's locking lugs leave between their tips0.572 in ± 0.003 in 14.5 mmProvisionalWorked out: {bcm-16-mid-barrel.extension_lug_bore_d}
Worked out 0.572 in ± 0.003 in used
{bcm-16-mid-barrel.extension_lug_bore_d}, from the site owner
The locking lugs' front faces, ahead of the extension's rear end0.214 in ± 0.005 in 5.4 mmProvisionalWorked out: {bcm-16-mid-barrel.extension_lug_depth}
Worked out 0.214 in ± 0.005 in used
{bcm-16-mid-barrel.extension_lug_depth}, from the site owner
The recess ahead of the lugs, which the bolt's lugs turn in: its diameter0.83 in ± 0.003 in 21.1 mmProvisionalWorked out: {bcm-16-mid-barrel.extension_recess_d}
Worked out 0.83 in ± 0.003 in used
{bcm-16-mid-barrel.extension_recess_d}, from the site owner
The recess's front end, ahead of the extension's rear end0.595 in ± 0.005 in 15.1 mmProvisionalWorked out: {bcm-16-mid-barrel.extension_recess_depth}
Worked out 0.595 in ± 0.005 in used
{bcm-16-mid-barrel.extension_recess_depth}, from the site owner
The muzzle thread's major diameter (its crests)0.496 in ± 0.0033 in 12.6 mmConfirmedWorked out: {bcm-16-mid-barrel.thread_major_d}
Worked out 0.4957 in ± 0.0033 in used
{bcm-16-mid-barrel.thread_major_d}, from the site owner
8448549 sheet 1, Section M-M: "1/2-28 UNEF-2A MAJOR DIA .4989/.4924", as read for BCM's barrel's ledger.
The Army barrel's 1/2-28 thread, for the 1/2 x 28 the sellers state: what the model's thread is drawn at. The photo's silhouette of the thread is 0.489 (its median) to 0.494 (tools/turned.py) at the journal's scale.
The muzzle thread's minor diameter (its roots)0.455 in ± 0.002 in 11.6 mmConfirmedWorked out: {bcm-16-mid-barrel.thread_minor_d}
Worked out 0.4551 in ± 0.002 in used
{bcm-16-mid-barrel.thread_minor_d}, from the site owner
8448549 sheet 1, Section M-M: "MINOR DIA .4551 MAX", as read for BCM's barrel's ledger.
The muzzle thread's pitch0.036 in ± 0.00005 in 0.9 mmCorroboratedPublished: Primary Arms, Geissele Automatics CHF Chrome Lined 5.56 AR-15 Barrel - Mid-Length - Tapered - 14.5" (05-2985), Specifications; its Features: "Threaded 1/2x28", a seller, read Oct 6, 2026
Published “Thread Pattern 1/2 X 28” used
Primary Arms, Geissele Automatics CHF Chrome Lined 5.56 AR-15 Barrel - Mid-Length - Tapered - 14.5" (05-2985), Specifications; its Features: "Threaded 1/2x28", a seller, read Oct 6, 2026 the page, harvested Oct 6, 2026
Published “MUZZLE THREAD: 1/2 x 28”
Mile High Shooting Accessories, Geissele: CHF, Chrome Lined Barrel, 5.56 - 14.5" (SKU 05-2985), Specifications, a seller, read Oct 6, 2026 the page, harvested Oct 6, 2026
Two sellers' pages state the one thread.
28 threads to the inch, by the sellers' statement: not a measurement of this barrel.
The dimple under the journal, for a gas block's set screw: its diameter at the journal's surface0.156 in ± 0.01 in 4 mmProvisionalPhoto: Primary Arms' gallery, 05-2985_03: the journal close up, level, the dimple toward the lens, 2200 x 1467
Photo 0.156 in ± 0.01 in used
Primary Arms' gallery, 05-2985_03: the journal close up, level, the dimple toward the lens, 2200 x 1467, harvested
Scale: the journal's diameter there, 365 px (columns 760 to 1180, the silhouette at grey 235), as the published .750 (journal_od): 486.7 px/in. Read by a circle through the dimple's rim (the strongest edges round it): 37.9 px of radius, rms 2.2 px, its centre 11 px off the journal's middle row
Mile High: "There is one dimple machined in for a gas block set screw". A drilled spot with a coned floor. Not drawn: its depth isn't sourced (dimple_depth).
The dimple under the journal: its depthNo value yetMissingNo source yet
No source: the one close photo looks straight into it. Not drawn until a figure or a view with its edge on the silhouette is on file.
The slot along the collar's top, in line with the gas port: its widthNo value yetMissingNo source yet
A buyer on Primary Arms' page: "it also has an indexing notch on the top and a dimple to help locate a gas block". On the far side in the side photo; a mark a few pixels across in the three-quarter view (7f3cd09611e9) and on Rooftop's rendering. Not read, and not drawn. (The 13.9 in barrel's own photo shows its slot from above.)
The extension's rear face in the traced outline's own frame (from the silhouette's rear tip, at the journal's scale)0.069 in ± 0.012 in 1.8 mmProvisionalPhoto: Primary Arms' gallery, 05-2985_02: the barrel level on white, the muzzle at the left, 2200 x 1467
Photo 0.069 in ± 0.012 in used
Primary Arms' gallery, 05-2985_02: the barrel level on white, the muzzle at the left, 2200 x 1467, harvested
Scale: scale from geissele-145-chf-barrel.flange_od = 1.168 in (y-extent 156 px → 133.6 px/in). Read by the min end's face: the silhouette's tip at 0.002 less its rim's arc, 0.067 in of sag at radius 0.497179 (the end is seen from 7.6° off square; arc fitted over 100 rows, rms 0.004) of the traced outline (tools/trace.py); the extension's rear face in the outline's own frame (from its rear tip, at the journal's scale)
Where the outline is cut: the silhouette's tip is the rear rim's near side, which stands behind the face by the rim's arc.
The muzzle's face in the traced outline's own frame (from the silhouette's rear tip, at the journal's scale)14.979 in ± 0.091 in 380.5 mmProvisionalPhoto: Primary Arms' gallery, 05-2985_02: the barrel level on white, the muzzle at the left, 2200 x 1467
Photo 14.979 in ± 0.091 in used
Primary Arms' gallery, 05-2985_02: the barrel level on white, the muzzle at the left, 2200 x 1467, harvested
Scale: scale from geissele-145-chf-barrel.flange_od = 1.168 in (y-extent 156 px → 133.6 px/in). Read by the max end's face: the silhouette's tip at 15.031 less its rim's arc, 0.052 in of sag at radius 0.240181 (the end is seen from 12.2° off square; arc fitted over 113 rows, rms 0.002) of the traced outline (tools/trace.py); the muzzle's face in the outline's own frame (from its rear tip, at the journal's scale)
Where the outline is cut: the silhouette's front tip is the muzzle rim's near side.
What it goes with
By the way it mounts, and the figures each part on file states: a part whose figures say it doesn't fit is left out, and one whose fit can't be checked from what is published is marked. A check is against published figures, not a guarantee.
Barrel extension
- Uppers
- Aero Precision M4E1 Enhanced Upper Receiver Stripped, Aero Precision M4E1 Threaded upper receiver, BCM M4 Upper Receiver Assembly (w/ Laser T-Markings), Expo Arms 7075 Stripped AR-15 Upper Receiver, Geissele Automatics Super Duty Stripped Upper Receiver, Palmetto State Armory AR-15 Stripped Upper Receiver
Muzzle thread
- Muzzle devices
- Dead Air XRF Xeno Rimfire Muzzle Brake, HUXWRX Flash Hider-QD 556 1/2x28 (fit unchecked), Mil-spec A2 flash hider, 1/2-28 (drawing 9349051), Nordic Components 1/2-28 thread protector (ships on the 22RB), Otter Creek Labs Polonium, Otter Creek Labs Polonium K, Precision Armament M4-72 Severe-Duty® Compensator, SilencerCo Sparrow 22 (fit unchecked), SureFire ProComp 556 Muzzle Brake, SureFire SOCOM 3-Prong Flash Hider, SureFire SOCOM 4-Prong Flash Hider, SureFire WARCOMP Flash Hider, Taurus TX22 Thread Protector, VG6 Precision GAMMA 556
Gas block journal
- Gas blocks
- Aero Precision .750 low profile gas block, BCM Front Sight Base F - FSB (ID .750) - Milspec for Flat Top Uppers, BCM Low Profile Gas Block (steel with set screws) 750, SLR Rifleworks Sentry 7 Set Screw Adjustable Gas Block, Superlative Arms .750" Adjustable Gas Block, Bleed Off - Set Screw
Gas system length
Prices on file
Each seller's latest reading of its own page: before tax and shipping, and not a quote. The pages are read again every night.
- Mile High Shooting Accessories $365.00 Nov 21, 2026, in stock that day
- Primary Arms $365.00 Nov 21, 2026, out of stock that day
- AR15Discounts $365.00 Nov 21, 2026, out of stock that day