Upper
Geissele Automatics Super Duty Stripped Upper Receiver
Geissele's Super Duty upper, sold stripped with its Super Duty lower in the Super Duty Receiver Set: "This matched set pairs a Super Duty stripped upper receiver with a Super Duty stripped lower receiver, both forged from 7075-T6 aluminum"; "The upper receiver is stripped — no forward assist, dust cover, or barrel nut included." (Charlie's Custom Clones). "Forged 7075-T6 aluminum Hardcoat anodized black Mil-Spec dimensions" (Primary Arms, 05-1171B); "Upper Specs: Material: 7075-T6 Color: Black Finish: Type-3 Hardcoat Anodize Compatibility: Mil-Spec Markings: Milled T-Marks" (Aegis Cerakote).

- Weight
- 7.66 oz ± 0.8 oz Provisionalworked out: This part's own model's metal: the closed volume of app/public/models/geissele-super-duty-stripped-upper.receiver.glb as its script built it (4.695 cubic inches: the traced outline above the deck across the mil-spec forging's section, its forward assist housing, deflector, hinge lugs, cam pin pad, lugs and threaded nose, its bore, channel, port and holes cut; the manifest's volume_in3) times what a cubic inch of 7075 weighs (std.density.aluminium_7075, 1.632 oz): 4.695 x 1.632 = 7.66 oz. Its pages: "Forged 7075-T6 aluminum" (Primary Arms), "Upper Specs: Material: 7075-T6" (Aegis Cerakote). ± a tenth, for the section and the left side, which are the mil-spec forging's and not read on this receiver.
- Lowest price
- Sold in the Geissele Automatics Super Duty Receiver Set, not by itself
- Colours
- Black, Desert Dirt Color
- Drawn as
- modelled
- Maker's page
- charliescustomclones.com
In “Two-tone 16 in, Stealth Gray and soft-shooting”, a build on the start page, as it is.
Its figures
Every figure the site draws and checks it by, with where it came from. Open one for each source's reading, and why one is used where they differ.
Bore axis above the takedown pin centre0.877 in ± 0.0015 in 22.3 mmConfirmedWorked out: {std.ar15.bore_axis_y}
Worked out 0.8775 in ± 0.0015 in used
{std.ar15.bore_axis_y}, harvested
The standard's. Primary Arms' page for the black set it is sold in (05-1171B): "Features: Forged 7075-T6 aluminum Hardcoat anodized black Mil-Spec dimensions", "It is compatible with Mil-Spec AR-15 parts and accessories". Its being the Army drawing's receiver is what "Mil-Spec dimensions" is taken to say, and each face is tried on its photo.
Photo 0.875 in ± 0.01 in
Aegis Cerakote's z05-1171b_super_duty_receiver_set_black_02: the black set 05-1171B from the right, this upper on its lower, 3292 x 1988, harvested
Scale: the lower's two pin holes, std.ar15.pin_spacing apart (the upper's own lug holes are inside them, on the same axes): each see-through opening fitted as its near rim's circle and its far rim's at once (a copy on file rms 0.23 px), their midpoints the frame's points: 341.0 px/in on the mid-plane, a pixel 0.003 in. Read by the threaded nose's top and bottom edges over x 6.7 to 7.0 read 1.498 and 0.251 (trace.py's y_max and y_min): their middle 0.8745; a turned nose's silhouette edges lie close to the mid-plane, so the lens moves them by less than a thousandth; ± is a pixel's few
The drawings' figure; this receiver's own photo puts its nose's axis within its ± of it.
The top rail's surface above the pin line2.09 in ± 0.015 in 53.1 mmProvisionalPhoto: Aegis Cerakote's z05-1171b_super_duty_receiver_set_black_02: the black set 05-1171B from the right, this upper on its lower, 3292 x 1988
Photo 2.09 in ± 0.015 in used
Aegis Cerakote's z05-1171b_super_duty_receiver_set_black_02: the black set 05-1171B from the right, this upper on its lower, 3292 x 1988, harvested
Scale: the lower's two pin holes, std.ar15.pin_spacing apart (the upper's own lug holes are inside them, on the same axes): each see-through opening fitted as its near rim's circle and its far rim's at once (a copy on file rms 0.23 px), their midpoints the frame's points: 341.0 px/in on the mid-plane, a pixel 0.003 in. Read by the tooth tops read 2.101 ± 0.009 over x 1.0 to 6.0 (trace.py's band_top); from a lens above the rail the silhouette's top is the top flat's far edge, 0.31 further than the mid-plane: the lens stands about 28 in away opposite x 4.6, y 3.0 (right_photo_lens_*), so what is z nearer than the mid-plane reads large about that point by 28 / (28 - z): 2.091; ± is the reading's and the lens's distance
Read on Aegis Cerakote's side photo of the set, in the frame of the lower's pin holes. The catalog's other forged flat tops read 2.09 the same way (expo-arms-stripped-upper.rail_top_above_pin, psa-stripped-upper.rail_top_above_pin) and the reference model of a mil-spec forging has 2.090.
The rearmost rail slot's centre ahead of the takedown pin1.3 in ± 0.02 in 33 mmProvisionalPhoto: Aegis Cerakote's z05-1171b_super_duty_receiver_set_black_02: the black set 05-1171B from the right, this upper on its lower, 3292 x 1988
Photo 1.3 in ± 0.02 in used
Aegis Cerakote's z05-1171b_super_duty_receiver_set_black_02: the black set 05-1171B from the right, this upper on its lower, 3292 x 1988, harvested
Scale: the lower's two pin holes, std.ar15.pin_spacing apart (the upper's own lug holes are inside them, on the same axes): each see-through opening fitted as its near rim's circle and its far rim's at once (a copy on file rms 0.23 px), their midpoints the frame's points: 341.0 px/in on the mid-plane, a pixel 0.003 in. Read by the see-through gaps on rows 2.04 and 2.06 (work/rail.py): 13 of them; each read at its near edge (the front edge of a gap behind x 4.6, the rear edge of one ahead of it), the teeth's near faces about 0.4 nearer than the mid-plane: the lens stands about 28 in away opposite x 4.6, y 3.0 (right_photo_lens_*), so what is z nearer than the mid-plane reads large about that point by 28 / (28 - z); a slot's centre is that edge less half the standard's .206: the first slot at 1.28 by its own front edge, 1.30 to 1.31 by the ninth's to the thirteenth's at the standard pitch. The near edges run 0.4025 apart in the picture, 0.7% over the standard's .394 once brought back: what this frame and lens leave unexplained, 0.03 over the rail, inside the ±
Expo Arms' forged flat top reads 1.314 on a photo four times this one's size (expo-arms-stripped-upper.rail_slot0_x): the same forging's rail, within this reading's ±.
How many rail slots13ProvisionalPhoto: Aegis Cerakote's z05-1171b_super_duty_receiver_set_black_02: the black set 05-1171B from the right, this upper on its lower, 3292 x 1988
Photo 13 count used
Aegis Cerakote's z05-1171b_super_duty_receiver_set_black_02: the black set 05-1171B from the right, this upper on its lower, 3292 x 1988, harvested
Scale: the lower's two pin holes, std.ar15.pin_spacing apart (the upper's own lug holes are inside them, on the same axes): each see-through opening fitted as its near rim's circle and its far rim's at once (a copy on file rms 0.23 px), their midpoints the frame's points: 341.0 px/in on the mid-plane, a pixel 0.003 in. Read by the see-through gaps along rows 2.04 and 2.06 in, counted (work/rail.py): 13 on each, from 1.22 to 6.14 in the picture
Behind the first is a solid run of rail over the charging handle's channel (from rail_rear_x), ahead of the last a long tooth to the front shoulder. Aegis Cerakote's page says "Markings: Milled T-Marks" and Primary Arms' assembled upper's "Milled T-marks": not seen at the photos' size, and not drawn.
The top rail's head: where it begins ahead of the tongue, X (the app draws the head from here)0.416 in ± 0.006 in 10.6 mmProvisionalWorked out: {std.ar15.rail_tongue_shoulder_x}
Worked out 0.4165 in ± 0.006 in used
{std.ar15.rail_tongue_shoulder_x}, from the site owner
Until 2026-10-20 this was the rail's rearmost point (now rail_tongue_rear_x), and the app drew the head at its full width from there, square: the charging handle's T, cut round for a rounded rail end, stood in its corners. Behind this the rail is the standard's tongue (std.ar15.rail_tongue_*), which the receiver's model carries, as the 22RB's does.
The top rail's tongue: its rounded end's rearmost point, X ahead of the takedown pin-0.6 in ± 0.02 in -15.2 mmCorroboratedPhoto: Aegis Cerakote's z05-1171b_super_duty_receiver_set_black_01: the black set 05-1171B from the left, this upper on its lower, 3292 x 1988
Photo -0.64 in ± 0.02 in
Aegis Cerakote's z05-1171b_super_duty_receiver_set_black_02: the black set 05-1171B from the right, this upper on its lower, 3292 x 1988, harvested
Scale: the lower's two pin holes, std.ar15.pin_spacing apart (the upper's own lug holes are inside them, on the same axes): each see-through opening fitted as its near rim's circle and its far rim's at once (a copy on file rms 0.23 px), their midpoints the frame's points: 341.0 px/in on the mid-plane, a pixel 0.003 in. Read by the rail's tail's rear end in the traced outline (trace.py's x_min over y 1.95 to 2.2: -0.649 ± 0.004); a round end in plan shows its extreme a hundredth behind its tip from a lens ahead of it: -0.638. It stands a little behind the receiver's rear face (-0.621), as the photo shows it over the lower's buffer tower; ± covers the lens and a pixel's few
Photo -0.6 in ± 0.02 in used
Aegis Cerakote's z05-1171b_super_duty_receiver_set_black_01: the black set 05-1171B from the left, this upper on its lower, 3292 x 1988, harvested
Scale: the lower's two pin holes, std.ar15.pin_spacing apart: each see-through opening fitted as its near rim's circle and its far rim's at once (a copy on file rms 0.2 px; the pivot's in a window of 56 px, the ear's edge beside it), their midpoints the frame's points (takedown px 2681.05, 936.73; pivot 518.97, 935.46): 339.2 px/in on the mid-plane. Read by the rail's tail's rear end on rows 1.95 to 2.08 in: px 2887, -0.607 in the picture (the frame's check at the other end: the front shoulder's near edge brought back through the lens reads 6.597 to 6.606 for the drawing's 6.591, the thread's near rim 7.005 to 7.022 for the face's 7.036); a round end in plan shows its extreme about a hundredth behind its tip from a lens ahead of it (left_photo_lens_*): -0.60; ± covers that and the frame
The two photos of the set disagree by 0.04 on the tail's end, each frame landing on the drawing's front shoulder and face within 0.02. Decided by what the rail has to fit (CLAUDE.md: two readings that can't both be true): the left photo's places the tongue's tip where the catalog's other mil-spec forgings have theirs (-0.57 to -0.59) and where the charging handles on file, made for a mil-spec rail, clear it; the right one's stood the tongue 0.0011 cubic inches into Radian's Raptor SD's T (app/tests/handle-channel.test.ts, 2026-10-28). Both stay here.
The top rail's front end ahead of the takedown pin6.591 in ± 0.011 in 167.4 mmConfirmedWorked out: {.front_face_x} - {std.ar15.upper_barrel_thread_length}
Worked out 6.591 in ± 0.011 in used
{.front_face_x} - {std.ar15.upper_barrel_thread_length}, harvested
The rail's last tooth ends flush with the body's front shoulder, where the barrel-nut thread begins (the photo): the drawing's .445 REF behind the front face.
Ahead of it the receiver is the barrel nut's thread.
The receiver's rear face behind the takedown pin (negative)-0.621 in ± 0.005 in -15.8 mmConfirmedWorked out: {std.ar15.upper_rear_face_x}
Worked out -0.621 in ± 0.005 in used
{std.ar15.upper_rear_face_x}, harvested
The Army's drawing of the upper (8448524). Primary Arms' page for the black set it is sold in (05-1171B): "Features: Forged 7075-T6 aluminum Hardcoat anodized black Mil-Spec dimensions", "It is compatible with Mil-Spec AR-15 parts and accessories". Its being the Army drawing's receiver is what "Mil-Spec dimensions" is taken to say, and each face is tried on its photo.
The receiver's front face (the end of its barrel-nut thread) ahead of the takedown pin7.036 in ± 0.005 in 178.7 mmConfirmedWorked out: {std.ar15.upper_front_face_x}
Worked out 7.036 in ± 0.005 in used
{std.ar15.upper_front_face_x}, harvested
The Army's drawing: .661 ahead of the pivot lug's hole. Primary Arms' page for the black set it is sold in (05-1171B): "Features: Forged 7075-T6 aluminum Hardcoat anodized black Mil-Spec dimensions", "It is compatible with Mil-Spec AR-15 parts and accessories". Its being the Army drawing's receiver is what "Mil-Spec dimensions" is taken to say, and each face is tried on its photo.
Photo 7.03 in ± 0.02 in
Aegis Cerakote's z05-1171b_super_duty_receiver_set_black_02: the black set 05-1171B from the right, this upper on its lower, 3292 x 1988, harvested
Scale: the lower's two pin holes, std.ar15.pin_spacing apart (the upper's own lug holes are inside them, on the same axes): each see-through opening fitted as its near rim's circle and its far rim's at once (a copy on file rms 0.23 px), their midpoints the frame's points: 341.0 px/in on the mid-plane, a pixel 0.003 in. Read by the silhouette's front tip over y 0.6 to 1.2 reads 7.080 (trace.py's x_max): the thread's near rim at the face, about 0.59 nearer than the mid-plane (the chamfer's foot, barrel_thread_minor_d): the lens stands about 28 in away opposite x 4.6, y 3.0 (right_photo_lens_*), so what is z nearer than the mid-plane reads large about that point by 28 / (28 - z): 7.028; ± is the lens's distance and a pixel's few
The drawing dimensions the face; the photo lands on it within its ±.
The receiver's underside above the pin line0.248 in ± 0.0015 in 6.3 mmConfirmedWorked out: {std.ar15.deck_y}
Worked out 0.2485 in ± 0.0015 in used
{std.ar15.deck_y}, harvested
It sits on the lower's deck.
Width of the receiver's body1.18 in ± 0.02 in 30 mmConfirmedStandard: US Army TDP drawing 8448524 (Receiver, Upper), sheet 2 of 2, rev G: View G-G; user-supplied scan (Distribution Statement F, Colt proprietary notice), a copy on file
Standard “FORGED DIA 1.18 DIA REF -V-” used
US Army TDP drawing 8448524 (Receiver, Upper), sheet 2 of 2, rev G: View G-G; user-supplied scan (Distribution Statement F, Colt proprietary notice), a copy on file, from the site owner
The round body just behind the threaded nose, as aero-m4e1-threaded-upper.width reads it. Not measured on this receiver: its page has one photo, of its side.
The mil-spec forging's (Primary Arms: "Mil-Spec dimensions"). Its forward assist's housing and brass deflector stand out past it on the right.
The notch under the rail's rear end (the charging handle's room), its floor above the pin line1.58 in ± 0.03 in 40.1 mmProvisionalPhoto: Aegis Cerakote's z05-1171b_super_duty_receiver_set_black_02: the black set 05-1171B from the right, this upper on its lower, 3292 x 1988
Photo 1.58 in ± 0.03 in used
Aegis Cerakote's z05-1171b_super_duty_receiver_set_black_02: the black set 05-1171B from the right, this upper on its lower, 3292 x 1988, harvested
Scale: the lower's two pin holes, std.ar15.pin_spacing apart (the upper's own lug holes are inside them, on the same axes): each see-through opening fitted as its near rim's circle and its far rim's at once (a copy on file rms 0.23 px), their midpoints the frame's points: 341.0 px/in on the mid-plane, a pixel 0.003 in. Read by the see-through notch's lower edge in the traced outline (trace.py's y_max over x -0.5 to -0.1, y 1.2 to 1.75: 1.593); from a lens above, what bounds a see-through from below is the wall's far upper edge, 0.32 further than the mid-plane: the lens stands about 28 in away opposite x 4.6, y 3.0 (right_photo_lens_*), so what is z nearer than the mid-plane reads large about that point by 28 / (28 - z): 1.577; ± is the lens's place and a pixel's few
The wall's top behind the notch's front wall: what a charging handle's block lies on.
The notch under the rail's rear end, its roof (the rail's tail's underside) above the pin line1.91 in ± 0.03 in 48.5 mmProvisionalPhoto: Aegis Cerakote's z05-1171b_super_duty_receiver_set_black_02: the black set 05-1171B from the right, this upper on its lower, 3292 x 1988
Photo 1.91 in ± 0.03 in used
Aegis Cerakote's z05-1171b_super_duty_receiver_set_black_02: the black set 05-1171B from the right, this upper on its lower, 3292 x 1988, harvested
Scale: the lower's two pin holes, std.ar15.pin_spacing apart (the upper's own lug holes are inside them, on the same axes): each see-through opening fitted as its near rim's circle and its far rim's at once (a copy on file rms 0.23 px), their midpoints the frame's points: 341.0 px/in on the mid-plane, a pixel 0.003 in. Read by the see-through notch's upper edge in the traced outline, the rail's tail's underside (trace.py's y_min over x -0.45 to -0.1, y 1.75 to 2.05: 1.895); from a lens above, what bounds it from above is the underside's near edge, 0.32 nearer: the lens stands about 28 in away opposite x 4.6, y 3.0 (right_photo_lens_*), so what is z nearer than the mid-plane reads large about that point by 28 / (28 - z): 1.908. The notch is 0.33 high so, for a handle .2985 thick; its middle, 1.74, is the handle's axis on the drawing's tier (1.734) within the ±
The charging handle's channel above the bore's axis0.856 in ± 0.007 in 21.8 mmConfirmedWorked out: {std.ar15.charging_handle_axis_y} - {.bore_axis_above_pin}
Worked out 0.8563 in ± 0.007 in used
{std.ar15.charging_handle_axis_y} - {.bore_axis_above_pin}, from the site owner
Riding on its guide lugs on the channel's tier: std.ar15.charging_handle_axis_y.
The notch the handle's latch end lies in: the handle lies at its height (as expo-arms-stripped-upper.charging_handle_above_bore, 0.87).
The charging handle's seat: the front wall of the open notch under the rail's rear end, ahead of the takedown pin0.075 in ± 0.015 in 1.9 mmConfirmedStandard: US Army TDP drawing 8448524 (Receiver, Upper), sheet 1 of 2, rev G: side elevation, scaled (the notch has no callout in this view); user-supplied scan (Distribution Statement F, Colt proprietary notice), a copy on file
Standard 0.075 in ± 0.015 in used
US Army TDP drawing 8448524 (Receiver, Upper), sheet 1 of 2, rev G: side elevation, scaled (the notch has no callout in this view); user-supplied scan (Distribution Statement F, Colt proprietary notice), a copy on file, from the site owner
Scaled, not a callout. On the 6600 px scan the two lug holes, fitted as circles, are 1966 px apart (308.4 px/in over std.ar15.pin_spacing) and the notch's front wall (column 2427.5) is 21.5 px ahead of the takedown hole's centre: 0.070. From the rear face's line, 217 px behind the wall, it is 0.083: the drawing dimensions that face at -0.621 and the scan has it at -0.634 by the holes. Between the two; ± covers both. The notch is 0.31 to 0.32 high there, for the handle's .2985 (drawing 8448518), its front corners cut back 0.06.
Photo 0.057 in ± 0.03 in
Aegis Cerakote's z05-1171b_super_duty_receiver_set_black_02: the black set 05-1171B from the right, this upper on its lower, 3292 x 1988, harvested
Scale: the lower's two pin holes, std.ar15.pin_spacing apart (the upper's own lug holes are inside them, on the same axes): each see-through opening fitted as its near rim's circle and its far rim's at once (a copy on file rms 0.23 px), their midpoints the frame's points: 341.0 px/in on the mid-plane, a pixel 0.003 in. Read by the see-through notch's front wall in the traced outline: a straight edge at 0.004 in the picture from y 1.65 to 1.80, between two corners cut back. What bounds a see-through notch at the front, from a lens ahead of it, is the wall's near edge, 0.32 nearer than the mid-plane (the side's face): the lens stands about 28 in away opposite x 4.6, y 3.0 (right_photo_lens_*), so what is z nearer than the mid-plane reads large about that point by 28 / (28 - z): 0.057; ± covers the lens's distance and a pixel's few
The Army's drawing, scaled; this receiver's own notch reads 0.02 behind it, within both ±, through a lens whose distance is known to a seventh. The notch the model draws is at least the standard's (lib.handle_notch).
Where a charging handle stops: the front wall of the notch cut across the receiver under the rail's rear end, open to the rear. The handle's block lies in it with its shoulder against this wall, and the shaft runs on through the slot ahead of it (expo-arms-stripped-upper.handle_seat_x has the photo of one seated).
The side photo: its lens's distance from the receiver's mid-plane28 in ± 4 in 711.2 mmProvisionalPhoto: Aegis Cerakote's z05-1171b_super_duty_receiver_set_black_02: the black set 05-1171B from the right, this upper on its lower, 3292 x 1988
Photo 28 in ± 4 in used
Aegis Cerakote's z05-1171b_super_duty_receiver_set_black_02: the black set 05-1171B from the right, this upper on its lower, 3292 x 1988, harvested
Scale: the lower's two pin holes, std.ar15.pin_spacing apart (the upper's own lug holes are inside them, on the same axes): each see-through opening fitted as its near rim's circle and its far rim's at once (a copy on file rms 0.23 px), their midpoints the frame's points: 341.0 px/in on the mid-plane, a pixel 0.003 in. Read by the lower's two pin holes' far rims stand off their near ones by (49.6, -29.1) px at the takedown pin and (-18.6, -35.0) at the pivot (work/holes.py); the two lines through them meet 32.4 offsets out, which over the lower's 0.88 between its outer faces (std.ar15.lower_body_width) puts the lens 28 in from the mid-plane. Three checks through it: the forward assist's bore, square to its 20 degree axis, shows as an ellipse 0.088 wide (0.083 from 28 in, 0.048 from 20); the front shoulder's near edge reads 6.624 for the drawing's 6.591 (6.621 from 28 in); the thread's near rim 7.080 for the front face (7.088). The rail's gaps' near edges, 2.2% over the standard pitch in the picture, would say 20 in alone: ± covers both
A property of Aegis Cerakote's photo 95a4d20d054e, not of the receiver: the model corrects what the right side shows nearer the lens (the forward assist's rear face, the deflector, the hinge lugs) by it.
The side photo: where its lens stands, X4.6 in ± 0.5 in 116.8 mmProvisionalPhoto: Aegis Cerakote's z05-1171b_super_duty_receiver_set_black_02: the black set 05-1171B from the right, this upper on its lower, 3292 x 1988
Photo 4.6 in ± 0.5 in used
Aegis Cerakote's z05-1171b_super_duty_receiver_set_black_02: the black set 05-1171B from the right, this upper on its lower, 3292 x 1988, harvested
Scale: the lower's two pin holes, std.ar15.pin_spacing apart (the upper's own lug holes are inside them, on the same axes): each see-through opening fitted as its near rim's circle and its far rim's at once (a copy on file rms 0.23 px), their midpoints the frame's points: 341.0 px/in on the mid-plane, a pixel 0.003 in. Read by where the lines through the two holes' near and far rims meet (right_photo_lens_distance): px 2235; the rail's gaps are widest about x 4.4 to 5.0 (0.217 against 0.126 at the ends), which is where a lens's axis leaves them least cut down
The side photo: where its lens stands, Y3 in ± 0.3 in 76.2 mmProvisionalPhoto: Aegis Cerakote's z05-1171b_super_duty_receiver_set_black_02: the black set 05-1171B from the right, this upper on its lower, 3292 x 1988
Photo 3 in ± 0.3 in used
Aegis Cerakote's z05-1171b_super_duty_receiver_set_black_02: the black set 05-1171B from the right, this upper on its lower, 3292 x 1988, harvested
Scale: the lower's two pin holes, std.ar15.pin_spacing apart (the upper's own lug holes are inside them, on the same axes): each see-through opening fitted as its near rim's circle and its far rim's at once (a copy on file rms 0.23 px), their midpoints the frame's points: 341.0 px/in on the mid-plane, a pixel 0.003 in. Read by as right_photo_lens_x: the takedown hole's line gives 2.72, the pivot's 3.29; the rail's top flat shows from above, as it must from a lens over it
The round body's radius about the bore (the forging's)0.59 in ± 0.01 in 15 mmConfirmedStandard: US Army TDP drawing 8448524 (Receiver, Upper), sheet 2 of 2, rev G: View G-G; user-supplied scan (Distribution Statement F, Colt proprietary notice), a copy on file
Standard “FORGED DIA 1.18 DIA REF -V-” used
US Army TDP drawing 8448524 (Receiver, Upper), sheet 2 of 2, rev G: View G-G; user-supplied scan (Distribution Statement F, Colt proprietary notice), a copy on file, from the site owner
Model 0.6 in ± 0.003 in
the AR-15 CAD reference set the user supplied, Deterrence Dispensed V11: a third-party model of a mil-spec forging, from the site owner
Read by its faces read from the STEP text in the rifle frame its lug holes set (x = 15.0189 - mx, y = my + 6.2992, z = -(mz + 0.8128), inches; a working script): cylindrical faces r 0.6000 about the bore's axis, x -0.43 to 6.59
The drawing's forged figure; the model's is 0.01 more.
The bore the bolt carrier runs in1 in ± 0.002 in 25.4 mmConfirmedStandard: US Army TDP drawing 8448524 (Receiver, Upper), sheet 1 of 2, rev G: note 4; user-supplied scan (Distribution Statement F, Colt proprietary notice), a copy on file
Standard “DIA -P- (IN 1.000 DIA ±.002 AREA)” used
US Army TDP drawing 8448524 (Receiver, Upper), sheet 1 of 2, rev G: note 4; user-supplied scan (Distribution Statement F, Colt proprietary notice), a copy on file, from the site owner
The rail's dovetail, its foot (where the neck begins), Y above the pin line1.885 in ± 0.003 in 47.9 mmProvisionalModel: the AR-15 CAD reference set the user supplied, Deterrence Dispensed V11: a third-party model of a mil-spec forging
Model 1.885 in ± 0.003 in used
the AR-15 CAD reference set the user supplied, Deterrence Dispensed V11: a third-party model of a mil-spec forging, from the site owner
Read by its faces read from the STEP text in the rifle frame its lug holes set (x = 15.0189 - mx, y = my + 6.2992, z = -(mz + 0.8128), inches; a working script): the planes under the dovetail at y 1.885, z 0.309 to 0.333
The rail's dovetail at its foot, half its width0.323 in ± 0.013 in 8.2 mmProvisionalWorked out: {std.picatinny.bevel_width} / 2 + {std.picatinny.lower_gauge_below_top} - ({.rail_top_above_pin} - {.dovetail_foot_y})
Model 0.333 in ± 0.003 in
the AR-15 CAD reference set the user supplied, Deterrence Dispensed V11: a third-party model of a mil-spec forging, from the site owner
Read by its faces read from the STEP text in the rifle frame its lug holes set (x = 15.0189 - mx, y = my + 6.2992, z = -(mz + 0.8128), inches; a working script): the planes at y 1.885 reach z 0.333
Worked out 0.323 in ± 0.013 in used
{std.picatinny.bevel_width} / 2 + {std.picatinny.lower_gauge_below_top} - ({.rail_top_above_pin} - {.dovetail_foot_y}), harvested
The standard's lower face carried on at its 45 degrees from the lower gauge line (.748 across, .154 below the rail's top) to the height the reference model has the foot at: the face every other rail on file has (the teeth the app draws on this body, a handguard's own rail) and every clamp's channel is cut to. ± is the gauge line's .010 and the model's .003.
The standard's: a rail's head is MIL-STD-1913's, and every clamp's channel is cut to it (pipeline/blender/lib.py rail_seat). The reference model draws the same face a hundredth further out, at the standard's stated .164 where the ledger has the middle of .164 -.020 (std.picatinny.lower_gauge_below_top): inside the standard's band, but a body drawn so stands in every clamp (expo-arms-stripped-upper.dovetail_foot_half_width). The model isn't authoritative beside the standard; its neck and the foot's height are still its own.
The rail's neck below its dovetail, half its width0.309 in ± 0.003 in 7.8 mmProvisionalModel: the AR-15 CAD reference set the user supplied, Deterrence Dispensed V11: a third-party model of a mil-spec forging
Model 0.309 in ± 0.003 in used
the AR-15 CAD reference set the user supplied, Deterrence Dispensed V11: a third-party model of a mil-spec forging, from the site owner
Read by its faces read from the STEP text in the rifle frame its lug holes set (x = 15.0189 - mx, y = my + 6.2992, z = -(mz + 0.8128), inches; a working script): the planes at y 1.700 and 1.885 begin at z 0.309
The rail's neck, where it meets the receiver's sides, Y1.7 in ± 0.003 in 43.2 mmProvisionalModel: the AR-15 CAD reference set the user supplied, Deterrence Dispensed V11: a third-party model of a mil-spec forging
Model 1.7 in ± 0.003 in used
the AR-15 CAD reference set the user supplied, Deterrence Dispensed V11: a third-party model of a mil-spec forging, from the site owner
Read by its faces read from the STEP text in the rifle frame its lug holes set (x = 15.0189 - mx, y = my + 6.2992, z = -(mz + 0.8128), inches; a working script): the planes at y 1.700, z 0.309 to 0.319
The receiver's sides below the rail's neck, half its width0.319 in ± 0.003 in 8.1 mmProvisionalModel: the AR-15 CAD reference set the user supplied, Deterrence Dispensed V11: a third-party model of a mil-spec forging
Model 0.319 in ± 0.003 in used
the AR-15 CAD reference set the user supplied, Deterrence Dispensed V11: a third-party model of a mil-spec forging, from the site owner
Read by its faces read from the STEP text in the rifle frame its lug holes set (x = 15.0189 - mx, y = my + 6.2992, z = -(mz + 0.8128), inches; a working script): the planes at y 1.700 end at z 0.319; a .10 fillet below them
The receiver's sides, where they turn into the round body, Y1.44 in ± 0.005 in 36.6 mmProvisionalModel: the AR-15 CAD reference set the user supplied, Deterrence Dispensed V11: a third-party model of a mil-spec forging
Model 1.44 in ± 0.005 in used
the AR-15 CAD reference set the user supplied, Deterrence Dispensed V11: a third-party model of a mil-spec forging, from the site owner
Read by its faces read from the STEP text in the rifle frame its lug holes set (x = 15.0189 - mx, y = my + 6.2992, z = -(mz + 0.8128), inches; a working script): the r .10 fillet between the flat side and the round body, its axis at y 1.440, z 0.419
The walls below the round body down to the underside, half the width0.453 in ± 0.003 in 11.5 mmProvisionalModel: the AR-15 CAD reference set the user supplied, Deterrence Dispensed V11: a third-party model of a mil-spec forging
Model 0.453 in ± 0.003 in used
the AR-15 CAD reference set the user supplied, Deterrence Dispensed V11: a third-party model of a mil-spec forging, from the site owner
Read by its faces read from the STEP text in the rifle frame its lug holes set (x = 15.0189 - mx, y = my + 6.2992, z = -(mz + 0.8128), inches; a working script): the r .075 fillets at y 0.458, their axes at z 0.528
The flange round the rear end, its radius about the bore0.694 in ± 0.003 in 17.6 mmProvisionalModel: the AR-15 CAD reference set the user supplied, Deterrence Dispensed V11: a third-party model of a mil-spec forging
Model 0.6938 in ± 0.003 in used
the AR-15 CAD reference set the user supplied, Deterrence Dispensed V11: a third-party model of a mil-spec forging, from the site owner
Read by its faces read from the STEP text in the rifle frame its lug holes set (x = 15.0189 - mx, y = my + 6.2992, z = -(mz + 0.8128), inches; a working script): cylindrical faces r 0.6938 about the bore's axis from the rear face to x -0.470, on both sides
The raised lip that follows the rear end's contour, the forging's.
The rear flange's front face, X-0.47 in ± 0.005 in -11.9 mmProvisionalModel: the AR-15 CAD reference set the user supplied, Deterrence Dispensed V11: a third-party model of a mil-spec forging
Model -0.47 in ± 0.005 in used
the AR-15 CAD reference set the user supplied, Deterrence Dispensed V11: a third-party model of a mil-spec forging, from the site owner
Read by its faces read from the STEP text in the rifle frame its lug holes set (x = 15.0189 - mx, y = my + 6.2992, z = -(mz + 0.8128), inches; a working script): the r 0.6938 faces end at x -0.470
The takedown and pivot lugs' width0.494 in ± 0.0015 in 12.6 mmConfirmedStandard: US Army TDP drawing 8448524 (Receiver, Upper), sheet 1 of 2, rev G: the rear elevation; user-supplied scan (Distribution Statement F, Colt proprietary notice), a copy on file
Standard “.496 -.003 BOTH LUGS” used
US Army TDP drawing 8448524 (Receiver, Upper), sheet 1 of 2, rev G: the rear elevation; user-supplied scan (Distribution Statement F, Colt proprietary notice), a copy on file, from the site owner
The reference model has them 0.494.
The takedown lug's rear face, how high it rises into the body, Y0.458 in ± 0.005 in 11.6 mmProvisionalModel: the AR-15 CAD reference set the user supplied, Deterrence Dispensed V11: a third-party model of a mil-spec forging
Model 0.458 in ± 0.005 in used
the AR-15 CAD reference set the user supplied, Deterrence Dispensed V11: a third-party model of a mil-spec forging, from the site owner
Read by its faces read from the STEP text in the rifle frame its lug holes set: the plane x -0.236 from y -0.212 to 0.458; the r .75 corner faces lie outside z ±0.247
Behind it the body's lower rear is cut away either side of the lug's width, to the arc a lower's rear walls rise along (std.ar15.rear_wall_arc_r; the upper's own is std.ar15.upper_rear_corner_r).
The lugs' pin holes0.251 in ± 0.001 in 6.4 mmConfirmedStandard: US Army TDP drawing 8448524 (Receiver, Upper), sheet 1 of 2, rev G: side elevation; user-supplied scan (Distribution Statement F, Colt proprietary notice), a copy on file
Standard “.250 DIA +.002 THRU (the takedown lug's, CSK .31 DIA X 90 INCL THIS SIDE ONLY); .250 DIA +.001 THRU (the pivot lug's)” used
US Army TDP drawing 8448524 (Receiver, Upper), sheet 1 of 2, rev G: side elevation; user-supplied scan (Distribution Statement F, Colt proprietary notice), a copy on file, from the site owner
The photo's two holes are fitted with this diameter (right_photo_lens_*).
The barrel-nut thread's major diameter1.244 in ± 0.0044 in 31.6 mmConfirmedStandard: US Army TDP drawing 8448524 (Receiver, Upper), sheet 1 of 2, rev G: plan view, the threaded end; user-supplied scan (Distribution Statement F, Colt proprietary notice), a copy on file
Standard “1 1/4 -18 UNEF-2A MAJOR DIA - 1.2485/1.2398 (AFTER ANODIZE)” used
US Army TDP drawing 8448524 (Receiver, Upper), sheet 1 of 2, rev G: plan view, the threaded end; user-supplied scan (Distribution Statement F, Colt proprietary notice), a copy on file, from the site owner
Photo 1.247 in ± 0.01 in
Aegis Cerakote's z05-1171b_super_duty_receiver_set_black_02: the black set 05-1171B from the right, this upper on its lower, 3292 x 1988, harvested
Scale: the lower's two pin holes, std.ar15.pin_spacing apart (the upper's own lug holes are inside them, on the same axes): each see-through opening fitted as its near rim's circle and its far rim's at once (a copy on file rms 0.23 px), their midpoints the frame's points: 341.0 px/in on the mid-plane, a pixel 0.003 in. Read by the threaded nose's top and bottom edges over x 6.7 to 7.0 read 1.498 and 0.251 (trace.py's y_max and y_min), the crests' silhouette; their edges lie close to the mid-plane, so the lens moves them by less than a thousandth
The drawing's thread; the photo's crests land on it within its ±.
The barrel-nut thread's minor diameter1.18 in ± 0.003 in 30 mmConfirmedStandard: US Army TDP drawing 8448524 (Receiver, Upper), sheet 1 of 2, rev G: plan view, the threaded end; user-supplied scan (Distribution Statement F, Colt proprietary notice), a copy on file
Standard “MINOR DIA - 1.1803 MAX” used
US Army TDP drawing 8448524 (Receiver, Upper), sheet 1 of 2, rev G: plan view, the threaded end; user-supplied scan (Distribution Statement F, Colt proprietary notice), a copy on file, from the site owner
The barrel-nut thread's turns to the inch18ConfirmedStandard: US Army TDP drawing 8448524 (Receiver, Upper), sheet 1 of 2, rev G: plan view, the threaded end; user-supplied scan (Distribution Statement F, Colt proprietary notice), a copy on file
Standard “1 1/4 -18 UNEF-2A” used
US Army TDP drawing 8448524 (Receiver, Upper), sheet 1 of 2, rev G: plan view, the threaded end; user-supplied scan (Distribution Statement F, Colt proprietary notice), a copy on file, from the site owner
The gas tube's hole in the front shoulder0.183 in ± 0.0015 in 4.7 mmConflictStandard: US Army TDP drawing 8448524 (Receiver, Upper), sheet 2 of 2, rev G: View F-F; user-supplied scan (Distribution Statement F, Colt proprietary notice), a copy on file
Standard “.182 DIA +.003 THRU; .312 DIA +.010 BACK BORE” used
US Army TDP drawing 8448524 (Receiver, Upper), sheet 2 of 2, rev G: View F-F; user-supplied scan (Distribution Statement F, Colt proprietary notice), a copy on file, from the site owner
Model 0.175 in ± 0.003 in
the AR-15 CAD reference set the user supplied, Deterrence Dispensed V11: a third-party model of a mil-spec forging, from the site owner
Read by its faces read from the STEP text in the rifle frame its lug holes set (x = 15.0189 - mx, y = my + 6.2992, z = -(mz + 0.8128), inches; a working script): a cylinder r 0.0875 along x at y 1.662, z 0 (0.783 above the bore), x 6.401 to 6.591
The drawing's callout; the model's hole is 0.008 smaller.
tdp and model differ by 0.009 in beyond what each states it is good to.
Above the thread on the bore's mid-plane, std.ar15.gas_tube_above_bore above the bore. Not visible in the set's side photos: the drawing's.
The gas tube hole's four corner reliefs, diameter0.094 in ± 0.002 in 2.4 mmConfirmedStandard: US Army TDP drawing 8448524 (Receiver, Upper), sheet 2 of 2, rev G: View F-F; user-supplied scan (Distribution Statement F, Colt proprietary notice), a copy on file
Standard “.047 R, 4 PLACES EQUALLY SPACED RANDOM ORIENTATION EXCEPT MUST NOT INTERSECT THREADS” used
US Army TDP drawing 8448524 (Receiver, Upper), sheet 2 of 2, rev G: View F-F; user-supplied scan (Distribution Statement F, Colt proprietary notice), a copy on file, from the site owner
Model 0.09 in ± 0.003 in
the AR-15 CAD reference set the user supplied, Deterrence Dispensed V11: a third-party model of a mil-spec forging, from the site owner
Read by its faces read from the STEP text in the rifle frame its lug holes set (x = 15.0189 - mx, y = my + 6.2992, z = -(mz + 0.8128), inches; a working script): four cylinders r 0.0450 along x round the gas tube's hole
The drawing's radius; the model's is 0.002 less.
The gas tube hole's corner reliefs, off its centre each way0.078 in ± 0.003 in 2 mmProvisionalModel: the AR-15 CAD reference set the user supplied, Deterrence Dispensed V11: a third-party model of a mil-spec forging
Model 0.078 in ± 0.003 in used
the AR-15 CAD reference set the user supplied, Deterrence Dispensed V11: a third-party model of a mil-spec forging, from the site owner
Read by its faces read from the STEP text in the rifle frame its lug holes set (x = 15.0189 - mx, y = my + 6.2992, z = -(mz + 0.8128), inches; a working script): their axes at y 1.585 and 1.740, z ±0.078: 0.0775 and 0.078 off the hole's centre
The ejection port's length3.125 in ± 0.005 in 79.4 mmConfirmedStandard: US Army TDP drawing 8448524 (Receiver, Upper), sheet 1 of 2, rev G: side elevation; user-supplied scan (Distribution Statement F, Colt proprietary notice), a copy on file
Standard “3.125; .25 R TRUE 2 PLACES; 1.562 ±.010” used
US Army TDP drawing 8448524 (Receiver, Upper), sheet 1 of 2, rev G: side elevation; user-supplied scan (Distribution Statement F, Colt proprietary notice), a copy on file, from the site owner
Photo 3.09 in ± 0.04 in
Aegis Cerakote's z05-1171b_super_duty_receiver_set_black_02: the black set 05-1171B from the right, this upper on its lower, 3292 x 1988, harvested
Scale: the lower's two pin holes, std.ar15.pin_spacing apart (the upper's own lug holes are inside them, on the same axes): each see-through opening fitted as its near rim's circle and its far rim's at once (a copy on file rms 0.23 px), their midpoints the frame's points: 341.0 px/in on the mid-plane, a pixel 0.003 in. Read by the dark obround's ends in the picture, 2.909 and 6.068, its rim about 0.6 nearer than the mid-plane: the lens stands about 28 in away opposite x 4.6, y 3.0 (right_photo_lens_*), so what is z nearer than the mid-plane reads large about that point by 28 / (28 - z): 2.945 to 6.037
The drawing dimensions the port; the photo lands on it within its ±.
The opening reads short of the callout, as it does on Expo Arms' and Aero's photos and on the reference model (3.097): the drawing marks .005 and .042 beside the 3.125's two ends, which may be the opening's own ends inside it.
The ejection port's front end ahead of the takedown pin6.036 in ± 0.01 in 153.3 mmConfirmedWorked out: {.front_face_x} - 1.00in
Worked out 6.036 in ± 0.01 in used
{.front_face_x} - 1.00in, from the site owner
8448524 sheet 1: "1.00" from the 3.125's front end to the receiver's front end (read on the scan at 309 px/in: the two extension lines are 1.00 apart).
Photo 6.04 in ± 0.03 in
Aegis Cerakote's z05-1171b_super_duty_receiver_set_black_02: the black set 05-1171B from the right, this upper on its lower, 3292 x 1988, harvested
Scale: the lower's two pin holes, std.ar15.pin_spacing apart (the upper's own lug holes are inside them, on the same axes): each see-through opening fitted as its near rim's circle and its far rim's at once (a copy on file rms 0.23 px), their midpoints the frame's points: 341.0 px/in on the mid-plane, a pixel 0.003 in. Read by the dark obround's front end in the picture, 6.068, its rim about 0.6 nearer: the lens stands about 28 in away opposite x 4.6, y 3.0 (right_photo_lens_*), so what is z nearer than the mid-plane reads large about that point by 28 / (28 - z): 6.037
The drawing's; the photo lands on it.
The port's lower edge above the pin line, seen from the side (its ends R .25: 0.50 high)0.841 in ± 0.01 in 21.4 mmConfirmedStandard: 8448524 sheet 1 side view, scaled (not a callout): its lower straight edge at px row 3640 against the lug holes' row 3900 at the sheet's own 309.3 px/in (the lug holes 6.375 apart), as aero-m4e1-threaded-upper.port_bottom_y read it; a half-size crop reads 0.847 here
Standard 0.841 in ± 0.01 in used
8448524 sheet 1 side view, scaled (not a callout): its lower straight edge at px row 3640 against the lug holes' row 3900 at the sheet's own 309.3 px/in (the lug holes 6.375 apart), as aero-m4e1-threaded-upper.port_bottom_y read it; a half-size crop reads 0.847 here, from the site owner
Photo 0.86 in ± 0.03 in
Aegis Cerakote's z05-1171b_super_duty_receiver_set_black_02: the black set 05-1171B from the right, this upper on its lower, 3292 x 1988, harvested
Scale: the lower's two pin holes, std.ar15.pin_spacing apart (the upper's own lug holes are inside them, on the same axes): each see-through opening fitted as its near rim's circle and its far rim's at once (a copy on file rms 0.23 px), their midpoints the frame's points: 341.0 px/in on the mid-plane, a pixel 0.003 in. Read by the dark obround's lower edge in the picture, 0.814, its rim about 0.6 nearer: the lens stands about 28 in away opposite x 4.6, y 3.0 (right_photo_lens_*), so what is z nearer than the mid-plane reads large about that point by 28 / (28 - z): 0.860; its upper edge 1.385, so 0.525 high for the drawing's .25 R ends
The drawing's; the photo lands within its ±.
The port's ends' radius (half its height from the side)0.25 in ± 0.005 in 6.3 mmConfirmedStandard: US Army TDP drawing 8448524 (Receiver, Upper), sheet 1 of 2, rev G: side elevation; user-supplied scan (Distribution Statement F, Colt proprietary notice), a copy on file
Standard “.25 R TRUE 2 PLACES” used
US Army TDP drawing 8448524 (Receiver, Upper), sheet 1 of 2, rev G: side elevation; user-supplied scan (Distribution Statement F, Colt proprietary notice), a copy on file, from the site owner
The forward assist's axis, turned inward toward the front in plan20° ± 1°ConfirmedStandard: US Army TDP drawing 8448524 (Receiver, Upper), sheet 1 of 2, rev G: the plan view's forward assist section (CL HOLE at 20°, 1.0285 ±.0050, .509 DIA ±.003, .315 DIA ±.001); user-supplied scan (Distribution Statement F, Colt proprietary notice), a copy on file
Standard “20°” used
US Army TDP drawing 8448524 (Receiver, Upper), sheet 1 of 2, rev G: the plan view's forward assist section (CL HOLE at 20°, 1.0285 ±.0050, .509 DIA ±.003, .315 DIA ±.001); user-supplied scan (Distribution Statement F, Colt proprietary notice), a copy on file, from the site owner
The reference model has 22.5 (aero-m4e1-threaded-upper.fa_axis_angle): the drawing wins.
The forward assist's bore0.509 in ± 0.003 in 12.9 mmConfirmedStandard: US Army TDP drawing 8448524 (Receiver, Upper), sheet 1 of 2, rev G: the plan view's forward assist section; user-supplied scan (Distribution Statement F, Colt proprietary notice), a copy on file
Standard “.509 DIA ±.003” used
US Army TDP drawing 8448524 (Receiver, Upper), sheet 1 of 2, rev G: the plan view's forward assist section; user-supplied scan (Distribution Statement F, Colt proprietary notice), a copy on file, from the site owner
The forward assist's bore, how deep its .509 runs from the housing's rear face0.65 in ± 0.01 in 16.5 mmConfirmedStandard: US Army TDP drawing 8448524 (Receiver, Upper), sheet 1 of 2, rev G: the plan view's forward assist section; user-supplied scan (Distribution Statement F, Colt proprietary notice), a copy on file
Standard “.65” used
US Army TDP drawing 8448524 (Receiver, Upper), sheet 1 of 2, rev G: the plan view's forward assist section; user-supplied scan (Distribution Statement F, Colt proprietary notice), a copy on file, from the site owner
Read as the .509 bore's depth along its axis; ahead of it the hole is the .315.
The forward assist's inner bore, ahead of the .5090.315 in ± 0.001 in 8 mmConfirmedStandard: US Army TDP drawing 8448524 (Receiver, Upper), sheet 1 of 2, rev G: the plan view's forward assist section; user-supplied scan (Distribution Statement F, Colt proprietary notice), a copy on file
Standard “.315 DIA ±.001” used
US Army TDP drawing 8448524 (Receiver, Upper), sheet 1 of 2, rev G: the plan view's forward assist section; user-supplied scan (Distribution Statement F, Colt proprietary notice), a copy on file, from the site owner
The forward assist's axis: a point on it, X-0.395 in ± 0.005 in -10 mmProvisionalModel: the AR-15 CAD reference set the user supplied, Deterrence Dispensed V11: a third-party model of a mil-spec forging
Model -0.395 in ± 0.005 in used
the AR-15 CAD reference set the user supplied, Deterrence Dispensed V11: a third-party model of a mil-spec forging, from the site owner
Read by its faces read from the STEP text in the rifle frame its lug holes set (x = 15.0189 - mx, y = my + 6.2992, z = -(mz + 0.8128), inches; a working script): the r .25 bore's axis through (-0.395, 0.879, 1.090)
With fa_axis_z and the drawing's angle this places the axis; scaled off the drawing's plan view (309 px/in) the hole's centre line is 1.0285 from the receiver's centre line 0.41 ahead of the rear face, which puts it at 1.097 here.
The forward assist's axis: that point out from the middle (Z)1.09 in ± 0.01 in 27.7 mmProvisionalModel: the AR-15 CAD reference set the user supplied, Deterrence Dispensed V11: a third-party model of a mil-spec forging
Model 1.09 in ± 0.01 in used
the AR-15 CAD reference set the user supplied, Deterrence Dispensed V11: a third-party model of a mil-spec forging, from the site owner
Read by its faces read from the STEP text in the rifle frame its lug holes set (x = 15.0189 - mx, y = my + 6.2992, z = -(mz + 0.8128), inches; a working script): the r .25 bore's axis through (-0.395, 0.879, 1.090)
The forward assist housing's rear face where the axis crosses it, X-0.48 in ± 0.04 in -12.2 mmProvisionalPhoto: Aegis Cerakote's z05-1171b_super_duty_receiver_set_black_02: the black set 05-1171B from the right, this upper on its lower, 3292 x 1988
Photo -0.48 in ± 0.04 in used
Aegis Cerakote's z05-1171b_super_duty_receiver_set_black_02: the black set 05-1171B from the right, this upper on its lower, 3292 x 1988, harvested
Scale: the lower's two pin holes, std.ar15.pin_spacing apart (the upper's own lug holes are inside them, on the same axes): each see-through opening fitted as its near rim's circle and its far rim's at once (a copy on file rms 0.23 px), their midpoints the frame's points: 341.0 px/in on the mid-plane, a pixel 0.003 in. Read by the forward assist's bore opening, the dark ellipse in its rear face (px 402 to 432, 582 to 762), centred at -0.693 in the picture; the face's centre is on the drawing's axis 1.12 nearer than the mid-plane (fa_axis_z, fa_axis_angle): the lens stands about 28 in away opposite x 4.6, y 3.0 (right_photo_lens_*), so what is z nearer than the mid-plane reads large about that point by 28 / (28 - z): -0.481. Its height reads 0.507 at that depth, the drawing's .509 bore (fa_bore_d), which checks the scale there. The housing's rearmost outline (-0.780 in the picture) is its rim's outer edge; ± covers the lens's distance from 24 to 32 in
The housing runs back to the rear end, as the drawing's side view has it and as Expo Arms' forging does (expo-arms-stripped-upper.fa_rear_x: -0.49 on a larger photo); the reference model's stops at -0.34.
The forward assist housing's radius about its axis0.313 in ± 0.003 in 7.9 mmCorroboratedModel: the AR-15 CAD reference set the user supplied, Deterrence Dispensed V11: a third-party model of a mil-spec forging
Model 0.3125 in ± 0.003 in used
the AR-15 CAD reference set the user supplied, Deterrence Dispensed V11: a third-party model of a mil-spec forging, from the site owner
Read by its faces read from the STEP text in the rifle frame its lug holes set (x = 15.0189 - mx, y = my + 6.2992, z = -(mz + 0.8128), inches; a working script): the housing's cylinder r .3125 on the bore's axis
Photo 0.304 in ± 0.02 in
Aegis Cerakote's z05-1171b_super_duty_receiver_set_black_02: the black set 05-1171B from the right, this upper on its lower, 3292 x 1988, harvested
Scale: the lower's two pin holes, std.ar15.pin_spacing apart (the upper's own lug holes are inside them, on the same axes): each see-through opening fitted as its near rim's circle and its far rim's at once (a copy on file rms 0.23 px), their midpoints the frame's points: 341.0 px/in on the mid-plane, a pixel 0.003 in. Read by the housing's bottom tangent (px 780) is 0.304 below its bore's centre (px 672) at the rear face's depth (the lens stands about 28 in away opposite x 4.6, y 3.0 (right_photo_lens_*), so what is z nearer than the mid-plane reads large about that point by 28 / (28 - z)); its top tangent is lost in the shadowed fillet above it (px 527 to 560), which the rim's feature box leaves out by taking the bottom mirrored about the bore
The reference model's; this receiver's photo reads its lower half within the ±.
The brass deflector's crest, out from the middle (Z; the forging's)1.25 in ± 0.05 in 31.8 mmProvisionalModel: the AR-15 CAD reference set the user supplied, Deterrence Dispensed V11: a third-party model of a mil-spec forging
Model 1.25 in ± 0.05 in used
the AR-15 CAD reference set the user supplied, Deterrence Dispensed V11: a third-party model of a mil-spec forging, from the site owner
Read by its faces read from the STEP text in the rifle frame its lug holes set (x = 15.0189 - mx, y = my + 6.2992, z = -(mz + 0.8128), inches; a working script): its crest's faces (a sphere and r .125, r 1.35 cylinders) reach z 1.20 to 1.30 at x 2.31 to 2.34, y 1.11 to 1.32
The mil-spec forging's: no end or top view of this receiver is on file to read its own on.
The deflector's crest, X2.35 in ± 0.03 in 59.7 mmCorroboratedPhoto: Aegis Cerakote's z05-1171b_super_duty_receiver_set_black_02: the black set 05-1171B from the right, this upper on its lower, 3292 x 1988
Model 2.32 in ± 0.02 in
the AR-15 CAD reference set the user supplied, Deterrence Dispensed V11: a third-party model of a mil-spec forging, from the site owner
Read by its faces read from the STEP text in the rifle frame its lug holes set (x = 15.0189 - mx, y = my + 6.2992, z = -(mz + 0.8128), inches; a working script): its crest's faces at x 2.308 to 2.337
Photo 2.35 in ± 0.03 in used
Aegis Cerakote's z05-1171b_super_duty_receiver_set_black_02: the black set 05-1171B from the right, this upper on its lower, 3292 x 1988, harvested
Scale: the lower's two pin holes, std.ar15.pin_spacing apart (the upper's own lug holes are inside them, on the same axes): each see-through opening fitted as its near rim's circle and its far rim's at once (a copy on file rms 0.23 px), their midpoints the frame's points: 341.0 px/in on the mid-plane, a pixel 0.003 in. Read by the crease between the deflector's rear face and its slope, the lit band at px 1405 to 1435, centred at 2.249 in the picture; the crest stands about 1.25 out (deflector_out): the lens stands about 28 in away opposite x 4.6, y 3.0 (right_photo_lens_*), so what is z nearer than the mid-plane reads large about that point by 28 / (28 - z): 2.354
This receiver's own crease (the reference model's crest is 0.03 behind it, within both ±): the deflector is its forging's.
The deflector's slope where it ends at the port, out from the middle (Z; the forging's)0.82 in ± 0.03 in 20.8 mmProvisionalModel: the AR-15 CAD reference set the user supplied, Deterrence Dispensed V11: a third-party model of a mil-spec forging
Model 0.82 in ± 0.03 in used
the AR-15 CAD reference set the user supplied, Deterrence Dispensed V11: a third-party model of a mil-spec forging, from the site owner
Read by its faces read from the STEP text in the rifle frame its lug holes set (x = 15.0189 - mx, y = my + 6.2992, z = -(mz + 0.8128), inches; a working script): its slope's faces come down to z 0.813 at x 2.886
The port door's hinge pin, Y0.641 in ± 0.003 in 16.3 mmProvisionalModel: the AR-15 CAD reference set the user supplied, Deterrence Dispensed V11: a third-party model of a mil-spec forging
Model 0.641 in ± 0.003 in used
the AR-15 CAD reference set the user supplied, Deterrence Dispensed V11: a third-party model of a mil-spec forging, from the site owner
Read by its faces read from the STEP text in the rifle frame its lug holes set (x = 15.0189 - mx, y = my + 6.2992, z = -(mz + 0.8128), inches; a working script): the two lugs' r .0625 holes and r .1365 bosses on one axis at y 0.641, z 0.689
This receiver's photo shows its two hinge lugs about where the model has them (profiles.side, hinge_rear and hinge_front, brought back through the lens): the rear one from 2.82 to 2.94 against the model's 2.837 to 2.932, the front one from 6.12 to 6.29 against 6.079 to 6.235, three pixels ahead. Each is drawn where the photo has it.
The port door's hinge pin, out from the middle (Z)0.689 in ± 0.003 in 17.5 mmProvisionalModel: the AR-15 CAD reference set the user supplied, Deterrence Dispensed V11: a third-party model of a mil-spec forging
Model 0.689 in ± 0.003 in used
the AR-15 CAD reference set the user supplied, Deterrence Dispensed V11: a third-party model of a mil-spec forging, from the site owner
Read by its faces read from the STEP text in the rifle frame its lug holes set (x = 15.0189 - mx, y = my + 6.2992, z = -(mz + 0.8128), inches; a working script): as hinge_axis_y
The hinge lugs' radius about the pin0.137 in ± 0.003 in 3.5 mmProvisionalModel: the AR-15 CAD reference set the user supplied, Deterrence Dispensed V11: a third-party model of a mil-spec forging
Model 0.1365 in ± 0.003 in used
the AR-15 CAD reference set the user supplied, Deterrence Dispensed V11: a third-party model of a mil-spec forging, from the site owner
Read by its faces read from the STEP text in the rifle frame its lug holes set (x = 15.0189 - mx, y = my + 6.2992, z = -(mz + 0.8128), inches; a working script): the lugs' cylindrical faces r .1365
The hinge pin's hole0.13 in ± 0.0015 in 3.3 mmConfirmedStandard: US Army TDP drawing 8448524 (Receiver, Upper), sheet 2 of 2, rev G: Section B-B; user-supplied scan (Distribution Statement F, Colt proprietary notice), a copy on file
Standard “.128 DIA +.003 THRU 2 HOLES IN LINE” used
US Army TDP drawing 8448524 (Receiver, Upper), sheet 2 of 2, rev G: Section B-B; user-supplied scan (Distribution Statement F, Colt proprietary notice), a copy on file, from the site owner
Model 0.125 in ± 0.003 in
the AR-15 CAD reference set the user supplied, Deterrence Dispensed V11: a third-party model of a mil-spec forging, from the site owner
Read by its faces read from the STEP text in the rifle frame its lug holes set (x = 15.0189 - mx, y = my + 6.2992, z = -(mz + 0.8128), inches; a working script): the lugs' holes r .0625
The drawing's callout; the model's holes are 0.004 smaller.
The cam pin's pad on the left side, its face out from the middle (Z, to the left)0.563 in ± 0.003 in 14.3 mmProvisionalModel: the AR-15 CAD reference set the user supplied, Deterrence Dispensed V11: a third-party model of a mil-spec forging
Model 0.5625 in ± 0.003 in used
the AR-15 CAD reference set the user supplied, Deterrence Dispensed V11: a third-party model of a mil-spec forging, from the site owner
Read by its faces read from the STEP text in the rifle frame its lug holes set: the round along the pad's top edge, r 0.0938 about an axis along x at (y 1.486, z -0.469), so its face at z -0.563; expo-arms-stripped-upper.cam_pad_face_z reads the same file's flat face at z -0.561 to -0.564 over x 4.60 to 5.58, y 1.05 to 1.63
The pad over the cam pin's travel is the forging's: the Army's machined drawing doesn't show it. The left side is drawn as the mil-spec forging's; Aegis Cerakote's left photo of the set (36123b52fa05) is read beside it.
The cam pin's pad, its face's rear edge ahead of the takedown pin4.6 in ± 0.01 in 116.8 mmConflictModel: the AR-15 CAD reference set the user supplied, Deterrence Dispensed V11: a third-party model of a mil-spec forging
Model 4.6 in ± 0.01 in used
the AR-15 CAD reference set the user supplied, Deterrence Dispensed V11: a third-party model of a mil-spec forging, from the site owner
Read by its faces read from the STEP text in the rifle frame its lug holes set: the pad's flat face at z -0.561 to -0.564 over x 4.60 to 5.58, y 1.05 to 1.63
Photo 4.51 in ± 0.04 in
Aegis Cerakote's z05-1171b_super_duty_receiver_set_black_01: the black set 05-1171B from the left, this upper on its lower, 3292 x 1988, harvested
Scale: the lower's two pin holes, std.ar15.pin_spacing apart: each see-through opening fitted as its near rim's circle and its far rim's at once (a copy on file rms 0.2 px; the pivot's in a window of 56 px, the ear's edge beside it), their midpoints the frame's points (takedown px 2681.05, 936.73; pivot 518.97, 935.46): 339.2 px/in on the mid-plane. Read by the pad's rear end, a rise in brightness at px 1138 on row 470: 4.549 in the picture; the lens stands behind the pad, so its rear round is seen whole and this is taken for the round's foot on the flat side, 0.32 nearer than the mid-plane: the lens stands about 25.5 in away opposite x 1.4, y 2.7 (left_photo_lens_*), so what is nearer than the mid-plane by d reads large about that point by 25.5 / (25.5 - d): 4.51
The reference model's. This receiver's left photo has the pad's rear end 0.09 further back, read where its round meets the side; which line of a lit round an edge in the picture is isn't settled at that size, so the forging's figure stands and the difference stays visible.
model and left differ by 0.09 in beyond what each states it is good to.
The left side is drawn as the mil-spec forging's; Aegis Cerakote's left photo of the set (36123b52fa05) is read beside it.
The cam pin's pad, its face's front edge5.58 in ± 0.01 in 141.7 mmCorroboratedModel: the AR-15 CAD reference set the user supplied, Deterrence Dispensed V11: a third-party model of a mil-spec forging
Model 5.58 in ± 0.01 in used
the AR-15 CAD reference set the user supplied, Deterrence Dispensed V11: a third-party model of a mil-spec forging, from the site owner
Read by its faces read from the STEP text in the rifle frame its lug holes set: the pad's flat face at z -0.561 to -0.564 over x 4.60 to 5.58, y 1.05 to 1.63
Photo 5.61 in ± 0.04 in
Aegis Cerakote's z05-1171b_super_duty_receiver_set_black_01: the black set 05-1171B from the left, this upper on its lower, 3292 x 1988, harvested
Scale: the lower's two pin holes, std.ar15.pin_spacing apart: each see-through opening fitted as its near rim's circle and its far rim's at once (a copy on file rms 0.2 px; the pivot's in a window of 56 px, the ear's edge beside it), their midpoints the frame's points (takedown px 2681.05, 936.73; pivot 518.97, 935.46): 339.2 px/in on the mid-plane. Read by the pad's front end, a rise in brightness at px 778 to 781 on rows 470 to 560: 5.610 in the picture; seen from behind, the front round is edge-on and this is the face's front edge, 0.56 nearer than the mid-plane: the lens stands about 25.5 in away opposite x 1.4, y 2.7 (left_photo_lens_*), so what is nearer than the mid-plane by d reads large about that point by 25.5 / (25.5 - d): 5.518, and the model's .094 round ahead of it: 5.61
The reference model's; this receiver's left photo has the pad's front end within its ± of it.
The left side is drawn as the mil-spec forging's; Aegis Cerakote's left photo of the set (36123b52fa05) is read beside it.
The cam pin's pad, its face's lower edge above the pin line1.05 in ± 0.01 in 26.7 mmProvisionalModel: the AR-15 CAD reference set the user supplied, Deterrence Dispensed V11: a third-party model of a mil-spec forging
Model 1.05 in ± 0.01 in used
the AR-15 CAD reference set the user supplied, Deterrence Dispensed V11: a third-party model of a mil-spec forging, from the site owner
Read by its faces read from the STEP text in the rifle frame its lug holes set: the pad's flat face at z -0.561 to -0.564 over x 4.60 to 5.58, y 1.05 to 1.63
The left side is drawn as the mil-spec forging's; Aegis Cerakote's left photo of the set (36123b52fa05) is read beside it. Its lower edge runs into the round body.
The cam pin's pad, its face's upper edge1.63 in ± 0.01 in 41.4 mmCorroboratedModel: the AR-15 CAD reference set the user supplied, Deterrence Dispensed V11: a third-party model of a mil-spec forging
Model 1.63 in ± 0.01 in used
the AR-15 CAD reference set the user supplied, Deterrence Dispensed V11: a third-party model of a mil-spec forging, from the site owner
Read by its faces read from the STEP text in the rifle frame its lug holes set: the pad's flat face at z -0.561 to -0.564 over x 4.60 to 5.58, y 1.05 to 1.63
Photo 1.63 in ± 0.02 in
Aegis Cerakote's z05-1171b_super_duty_receiver_set_black_01: the black set 05-1171B from the left, this upper on its lower, 3292 x 1988, harvested
Scale: the lower's two pin holes, std.ar15.pin_spacing apart: each see-through opening fitted as its near rim's circle and its far rim's at once (a copy on file rms 0.2 px; the pivot's in a window of 56 px, the ear's edge beside it), their midpoints the frame's points (takedown px 2681.05, 936.73; pivot 518.97, 935.46): 339.2 px/in on the mid-plane. Read by the dark band of the pad's upper round, its top edge at px 390 over x 850 to 1050 (the face's own top, px 427, is the round's foot): 1.612 in the picture; the round about 0.45 nearer than the mid-plane: the lens stands about 25.5 in away opposite x 1.4, y 2.7 (left_photo_lens_*), so what is nearer than the mid-plane by d reads large about that point by 25.5 / (25.5 - d): 1.631. The face's top reads 1.53, the model's .094 round under 1.63
The reference model's; this receiver's left photo lands on it.
The left side is drawn as the mil-spec forging's; Aegis Cerakote's left photo of the set (36123b52fa05) is read beside it.
The cam pin's pad, the round along its face's edges and at its upper corners0.094 in ± 0.003 in 2.4 mmProvisionalModel: the AR-15 CAD reference set the user supplied, Deterrence Dispensed V11: a third-party model of a mil-spec forging
Model 0.094 in ± 0.003 in used
the AR-15 CAD reference set the user supplied, Deterrence Dispensed V11: a third-party model of a mil-spec forging, from the site owner
Read by its faces read from the STEP text in the rifle frame its lug holes set: the round along the pad's top edge, r 0.0938 about (y 1.486, z -0.469), and its two upper corners' rounds about z, r 0.0938 at x 4.695 and 5.488
The left side is drawn as the mil-spec forging's; Aegis Cerakote's left photo of the set (36123b52fa05) is read beside it. BCM's forging reads 0.115 on its own photo (bcm-m4-upper.cam_pad_edge_round).
The charging handle latch's slot in the left wall: the wall left between it and the notch's front wall (handle_seat_x)0.156 in ± 0.005 in 4 mmConfirmedStandard: US Army TDP drawing 8448524 (Receiver, Upper), sheet 1 of 2, rev G: Section D-D (cut along the notch's centre line, View C-C: the left wall at the rear); user-supplied scan (Distribution Statement F, Colt proprietary notice), a copy on file
Standard “.156” used
US Army TDP drawing 8448524 (Receiver, Upper), sheet 1 of 2, rev G: Section D-D (cut along the notch's centre line, View C-C: the left wall at the rear); user-supplied scan (Distribution Statement F, Colt proprietary notice), a copy on file, from the site owner
The left side is drawn as the mil-spec forging's; Aegis Cerakote's left photo of the set (36123b52fa05) is read beside it. As bcm-m4-upper.latch_slot_wall reads the drawing.
The latch's slot, along the receiver (its ends full rounds of half this)0.195 in ± 0.005 in 5 mmConfirmedStandard: US Army TDP drawing 8448524 (Receiver, Upper), sheet 1 of 2, rev G: Section D-D (cut along the notch's centre line, View C-C: the left wall at the rear); user-supplied scan (Distribution Statement F, Colt proprietary notice), a copy on file
Standard “.195” used
US Army TDP drawing 8448524 (Receiver, Upper), sheet 1 of 2, rev G: Section D-D (cut along the notch's centre line, View C-C: the left wall at the rear); user-supplied scan (Distribution Statement F, Colt proprietary notice), a copy on file, from the site owner
View C-C marks the slot's end FULL R.
Model 0.192 in ± 0.003 in
the AR-15 CAD reference set the user supplied, Deterrence Dispensed V11: a third-party model of a mil-spec forging, from the site owner
Read by its faces read from the STEP text in the rifle frame its lug holes set: two rounds about z, r 0.0960, at (x 0.329, y 1.616) and (x 0.329, y 1.839), from the wall's face at z -0.318 in to the slot's floor at -0.251; the flat between them from x 0.233 to 0.425
Photo 0.191 in ± 0.01 in
Aegis Cerakote's z05-1171b_super_duty_receiver_set_black_01: the black set 05-1171B from the left, this upper on its lower, 3292 x 1988, harvested
Scale: the lower's two pin holes, std.ar15.pin_spacing apart: each see-through opening fitted as its near rim's circle and its far rim's at once (a copy on file rms 0.2 px; the pivot's in a window of 56 px, the ear's edge beside it), their midpoints the frame's points (takedown px 2681.05, 936.73; pivot 518.97, 935.46): 339.2 px/in on the mid-plane. Read by the dark obround's ends along rows 300 to 400, px 2538 and 2604: 0.421 and 0.227 in the picture; 0.32 nearer: the lens stands about 25.5 in away opposite x 1.4, y 2.7 (left_photo_lens_*), so what is nearer than the mid-plane by d reads large about that point by 25.5 / (25.5 - d): 0.433 and 0.242, 0.191 long, its rear end 0.167 ahead of the notch's front wall (handle_seat_x), the drawing's .156 within the ±
The drawing's callout; the reference model's is within 0.003 of it.
The left side is drawn as the mil-spec forging's; Aegis Cerakote's left photo of the set (36123b52fa05) is read beside it. As bcm-m4-upper.latch_slot_length reads the drawing.
The latch's slot, its lower end above the pin line1.52 in ± 0.003 in 38.6 mmCorroboratedModel: the AR-15 CAD reference set the user supplied, Deterrence Dispensed V11: a third-party model of a mil-spec forging
Model 1.52 in ± 0.003 in used
the AR-15 CAD reference set the user supplied, Deterrence Dispensed V11: a third-party model of a mil-spec forging, from the site owner
Read by its faces read from the STEP text in the rifle frame its lug holes set: two rounds about z, r 0.0960, at (x 0.329, y 1.616) and (x 0.329, y 1.839): the slot from y 1.520 to 1.935
Photo 1.54 in ± 0.02 in
Aegis Cerakote's z05-1171b_super_duty_receiver_set_black_01: the black set 05-1171B from the left, this upper on its lower, 3292 x 1988, harvested
Scale: the lower's two pin holes, std.ar15.pin_spacing apart: each see-through opening fitted as its near rim's circle and its far rim's at once (a copy on file rms 0.2 px; the pivot's in a window of 56 px, the ear's edge beside it), their midpoints the frame's points (takedown px 2681.05, 936.73; pivot 518.97, 935.46): 339.2 px/in on the mid-plane. Read by the dark obround's lower end at px 418 to 422 over x 2560 to 2585: 1.523 in the picture; the slot's rim in the flat side, 0.32 nearer than the mid-plane: the lens stands about 25.5 in away opposite x 1.4, y 2.7 (left_photo_lens_*), so what is nearer than the mid-plane by d reads large about that point by 25.5 / (25.5 - d): 1.538
The reference model's; this receiver's left photo lands within the ±.
The left side is drawn as the mil-spec forging's; Aegis Cerakote's left photo of the set (36123b52fa05) is read beside it. Its heights have no callout in the drawing's View C-C or Section D-D: the reference model's.
The latch's slot, its upper end above the pin line1.935 in ± 0.003 in 49.1 mmCorroboratedModel: the AR-15 CAD reference set the user supplied, Deterrence Dispensed V11: a third-party model of a mil-spec forging
Model 1.935 in ± 0.003 in used
the AR-15 CAD reference set the user supplied, Deterrence Dispensed V11: a third-party model of a mil-spec forging, from the site owner
Read by its faces read from the STEP text in the rifle frame its lug holes set: two rounds about z, r 0.0960, at (x 0.329, y 1.616) and (x 0.329, y 1.839): the slot from y 1.520 to 1.935
Photo 1.95 in ± 0.02 in
Aegis Cerakote's z05-1171b_super_duty_receiver_set_black_01: the black set 05-1171B from the left, this upper on its lower, 3292 x 1988, harvested
Scale: the lower's two pin holes, std.ar15.pin_spacing apart: each see-through opening fitted as its near rim's circle and its far rim's at once (a copy on file rms 0.2 px; the pivot's in a window of 56 px, the ear's edge beside it), their midpoints the frame's points (takedown px 2681.05, 936.73; pivot 518.97, 935.46): 339.2 px/in on the mid-plane. Read by the dark obround's upper end at px 277 to 280: 1.938 in the picture; 0.32 nearer: the lens stands about 25.5 in away opposite x 1.4, y 2.7 (left_photo_lens_*), so what is nearer than the mid-plane by d reads large about that point by 25.5 / (25.5 - d): 1.948
The reference model's; this receiver's left photo lands within the ±.
The left side is drawn as the mil-spec forging's; Aegis Cerakote's left photo of the set (36123b52fa05) is read beside it. Its heights have no callout in the drawing's View C-C or Section D-D: the reference model's.
The takedown lug's rear face, X (from the takedown pin)-0.236 in ± 0.003 in -6 mmProvisionalModel: the AR-15 CAD reference set the user supplied, Deterrence Dispensed V11: a third-party model of a mil-spec forging; retrieved from the source archive on 2026-10-28
Model -0.236 in ± 0.003 in used
the AR-15 CAD reference set the user supplied, Deterrence Dispensed V11: a third-party model of a mil-spec forging; retrieved from the source archive on 2026-10-28, from the site owner
Read by its faces' vertices below the deck (y < 0.2465) in the rifle frame its lug holes set (x = 15.0189 - mx, y = my + 6.2992, z = -(mz + 0.8128), inches; a copy on file)
Hidden in every photo on file (inside the lower's rear lug slot): the mil-spec forging's.
The takedown lug's front face, X0.226 in ± 0.003 in 5.7 mmProvisionalModel: the AR-15 CAD reference set the user supplied, Deterrence Dispensed V11: a third-party model of a mil-spec forging; retrieved from the source archive on 2026-10-28
Model 0.226 in ± 0.003 in used
the AR-15 CAD reference set the user supplied, Deterrence Dispensed V11: a third-party model of a mil-spec forging; retrieved from the source archive on 2026-10-28, from the site owner
Read by its faces' vertices below the deck (y < 0.2465) in the rifle frame its lug holes set (x = 15.0189 - mx, y = my + 6.2992, z = -(mz + 0.8128), inches; a copy on file)
Hidden in every photo on file: the mil-spec forging's.
The takedown lug's flat bottom, Y (below the pin line)-0.212 in ± 0.003 in -5.4 mmProvisionalModel: the AR-15 CAD reference set the user supplied, Deterrence Dispensed V11: a third-party model of a mil-spec forging; retrieved from the source archive on 2026-10-28
Model -0.212 in ± 0.003 in used
the AR-15 CAD reference set the user supplied, Deterrence Dispensed V11: a third-party model of a mil-spec forging; retrieved from the source archive on 2026-10-28, from the site owner
Read by its faces' vertices below the deck (y < 0.2465) in the rifle frame its lug holes set (x = 15.0189 - mx, y = my + 6.2992, z = -(mz + 0.8128), inches; a copy on file)
Hidden in every photo on file: the mil-spec forging's.
The pivot lug's rear face, X6.159 in ± 0.003 in 156.4 mmProvisionalModel: the AR-15 CAD reference set the user supplied, Deterrence Dispensed V11: a third-party model of a mil-spec forging; retrieved from the source archive on 2026-10-28
Model 6.159 in ± 0.003 in used
the AR-15 CAD reference set the user supplied, Deterrence Dispensed V11: a third-party model of a mil-spec forging; retrieved from the source archive on 2026-10-28, from the site owner
Read by its faces' vertices below the deck (y < 0.2465) in the rifle frame its lug holes set (x = 15.0189 - mx, y = my + 6.2992, z = -(mz + 0.8128), inches; a copy on file)
Hidden in every photo on file (between the lower's front ears): the mil-spec forging's.
The pivot lug's front face, X6.591 in ± 0.003 in 167.4 mmProvisionalModel: the AR-15 CAD reference set the user supplied, Deterrence Dispensed V11: a third-party model of a mil-spec forging; retrieved from the source archive on 2026-10-28
Model 6.591 in ± 0.003 in used
the AR-15 CAD reference set the user supplied, Deterrence Dispensed V11: a third-party model of a mil-spec forging; retrieved from the source archive on 2026-10-28, from the site owner
Read by its faces' vertices below the deck (y < 0.2465) in the rifle frame its lug holes set (x = 15.0189 - mx, y = my + 6.2992, z = -(mz + 0.8128), inches; a copy on file)
Hidden in every photo on file: the mil-spec forging's. It ends at the front shoulder (rail_front_x, 6.591).
The pivot lug's rounded end, its radius about the pivot pin0.246 in ± 0.003 in 6.2 mmProvisionalModel: the AR-15 CAD reference set the user supplied, Deterrence Dispensed V11: a third-party model of a mil-spec forging; retrieved from the source archive on 2026-10-28
Model 0.246 in ± 0.003 in used
the AR-15 CAD reference set the user supplied, Deterrence Dispensed V11: a third-party model of a mil-spec forging; retrieved from the source archive on 2026-10-28, from the site owner
Read by its faces' vertices below the deck (y < 0.2465) in the rifle frame its lug holes set (x = 15.0189 - mx, y = my + 6.2992, z = -(mz + 0.8128), inches; a copy on file)
Hidden in every photo on file: the mil-spec forging's. Its lowest vertices lie 0.246 below the pin line at x 6.30 and 6.44, on a round about the pin; the edges between the round and the flat faces are broken (vertices at 0.15 below at x 6.22 and 6.54), which the model leaves square.
The left photo: its lens's distance from the receiver's mid-plane25.5 in ± 4 in 647.7 mmProvisionalPhoto: Aegis Cerakote's z05-1171b_super_duty_receiver_set_black_01: the black set 05-1171B from the left, this upper on its lower, 3292 x 1988
Photo 25.5 in ± 4 in used
Aegis Cerakote's z05-1171b_super_duty_receiver_set_black_01: the black set 05-1171B from the left, this upper on its lower, 3292 x 1988, harvested
Scale: the lower's two pin holes, std.ar15.pin_spacing apart: each see-through opening fitted as its near rim's circle and its far rim's at once (a copy on file rms 0.2 px; the pivot's in a window of 56 px, the ear's edge beside it), their midpoints the frame's points (takedown px 2681.05, 936.73; pivot 518.97, 935.46): 339.2 px/in on the mid-plane. Read by the lower's two pin holes' far rims stand off their near ones by (58.2, -33.2) px at the pivot pin and (-14.5, -27.3) at the takedown pin (work/holes.py); the two lines through them meet 29.5 offsets out, which over the lower's 0.88 between its outer faces (std.ar15.lower_body_width) puts the lens 25.5 in from the mid-plane, opposite px (2201, 8). The latch slot's length read through it is the drawing's .195 within 0.004
A property of Aegis Cerakote's left photo 36123b52fa05, not of the receiver: the left side's readings are corrected by it.
The left photo: where its lens stands, X1.4 in ± 0.5 in 35.6 mmProvisionalPhoto: Aegis Cerakote's z05-1171b_super_duty_receiver_set_black_01: the black set 05-1171B from the left, this upper on its lower, 3292 x 1988
Photo 1.4 in ± 0.5 in used
Aegis Cerakote's z05-1171b_super_duty_receiver_set_black_01: the black set 05-1171B from the left, this upper on its lower, 3292 x 1988, harvested
Scale: the lower's two pin holes, std.ar15.pin_spacing apart: each see-through opening fitted as its near rim's circle and its far rim's at once (a copy on file rms 0.2 px; the pivot's in a window of 56 px, the ear's edge beside it), their midpoints the frame's points (takedown px 2681.05, 936.73; pivot 518.97, 935.46): 339.2 px/in on the mid-plane. Read by as left_photo_lens_distance: px 2201, 1.41 ahead of the takedown hole
A property of Aegis Cerakote's left photo 36123b52fa05, not of the receiver: the left side's readings are corrected by it.
The left photo: where its lens stands, Y2.7 in ± 0.4 in 68.6 mmProvisionalPhoto: Aegis Cerakote's z05-1171b_super_duty_receiver_set_black_01: the black set 05-1171B from the left, this upper on its lower, 3292 x 1988
Photo 2.7 in ± 0.4 in used
Aegis Cerakote's z05-1171b_super_duty_receiver_set_black_01: the black set 05-1171B from the left, this upper on its lower, 3292 x 1988, harvested
Scale: the lower's two pin holes, std.ar15.pin_spacing apart: each see-through opening fitted as its near rim's circle and its far rim's at once (a copy on file rms 0.2 px; the pivot's in a window of 56 px, the ear's edge beside it), their midpoints the frame's points (takedown px 2681.05, 936.73; pivot 518.97, 935.46): 339.2 px/in on the mid-plane. Read by as left_photo_lens_distance: px row 8, 2.74 above the pin line
A property of Aegis Cerakote's left photo 36123b52fa05, not of the receiver: the left side's readings are corrected by it.
The deflector's top where it meets the receiver's side, Y1.7 in ± 0.003 in 43.2 mmProvisionalWorked out: {.rail_neck_bottom_y}
Photo 1.71 in ± 0.02 in
Aegis Cerakote's z05-1171b_super_duty_receiver_set_black_02: the black set 05-1171B from the right, this upper on its lower, 3292 x 1988, harvested
Scale: the lower's two pin holes, std.ar15.pin_spacing apart (the upper's own lug holes are inside them, on the same axes): each see-through opening fitted as its near rim's circle and its far rim's at once (a copy on file rms 0.23 px), their midpoints the frame's points: 341.0 px/in on the mid-plane, a pixel 0.003 in. Read by the deflector's top: a horizontal line at px 367 over x 1340 to 1650 (the column profiles at x 1420 to 1600 drop from 66 to 30 there), 1.696 in the picture; it is the far edge of the top seen from above, at the side's face, 0.32 nearer than the mid-plane: the lens stands about 28 in away opposite x 4.6, y 3.0 (right_photo_lens_*), so what is z nearer than the mid-plane reads large about that point by 28 / (28 - z): 1.710. The same line runs on ahead of and behind the deflector as the rail's neck's foot
Worked out 1.7 in ± 0.003 in used
{.rail_neck_bottom_y}, harvested
The photo's line is the neck's foot's, the reference model's figure.
The photo has the deflector's top and the neck's foot as one line along the receiver, and reads that line 0.01 over the reference model's neck (1.70), as it reads the rail's top within a hundredth: the line is the neck's.
From a lens above the rail the deflector's top shows as a dark band, between the line it meets the side along and its outer face's top edge: its top slopes down outward (deflector_top_face_y). The line is one line with the rail's neck's foot, which runs the receiver's length in the same photo. Until 2026-10-28 the deflector was drawn with a flat top at its outline's, read at the deflector's middle depth (1.73), and a red dot's mount on the rail stood in it (app/tests/rail-clamps.test.ts: Aimpoint's T-2 at slot 5, 0.0023 cubic inches).
The deflector's top at its outer face, Y1.67 in ± 0.03 in 42.4 mmProvisionalPhoto: Aegis Cerakote's z05-1171b_super_duty_receiver_set_black_02: the black set 05-1171B from the right, this upper on its lower, 3292 x 1988
Photo 1.67 in ± 0.03 in used
Aegis Cerakote's z05-1171b_super_duty_receiver_set_black_02: the black set 05-1171B from the right, this upper on its lower, 3292 x 1988, harvested
Scale: the lower's two pin holes, std.ar15.pin_spacing apart (the upper's own lug holes are inside them, on the same axes): each see-through opening fitted as its near rim's circle and its far rim's at once (a copy on file rms 0.23 px), their midpoints the frame's points: 341.0 px/in on the mid-plane, a pixel 0.003 in. Read by the outer face's top edge, where the dark band of the deflector's top ends and its lit face begins: px 392 to 403 over x 1420 to 1540, 1.608 in the picture at px 397; about 1.25 nearer than the mid-plane (deflector_out): the lens stands about 28 in away opposite x 4.6, y 3.0 (right_photo_lens_*), so what is z nearer than the mid-plane reads large about that point by 28 / (28 - z): 1.671; ± covers the band's soft lower edge and the lens
What it goes with
By the way it mounts, and the figures each part on file states: a part whose figures say it doesn't fit is left out, and one whose fit can't be checked from what is published is marked. A check is against published figures, not a guarantee.
AR-15 receiver pins
- Lower receivers
- Aero Precision M4E1 complete lower, A2 grip and M4 stock, Aero Precision M4E1 Stripped Lower Receiver, Battle Arms Development Workhorse stripped lower, BCM MK2 AR-15 Lower Receiver, Bear Creek Arsenal BC-15 Multi Caliber, Lower Receiver, Black Anodized, Geissele Automatics Super Duty AR-15 Lower Receiver - Stripped Lower, Palmetto State Armory AR-15 "Stealth" Stripped Lower Receiver
Barrel extension
- Barrels
- Aero Precision 16" 5.56 CMV barrel, mid-length, BCM Standard 11.5" Carbine Barrel, Stripped, BCM Standard 14.5" Mid Length Barrel, Stripped, BCM Standard 16" Mid Length Barrel, Stripped, Bear Creek Arsenal BC-15 5.56 NATO, 16" Parkerized M4 Barrel, 1:7 Twist, Mid-Length Gas System, Daniel Defense CHF Chrome Lined 5.56 AR-15 Barrel - Carbine - Government - 10.3", Faxon Firearms Duty Series Pencil Profile 16" Mid-Length 5.56 NATO AR15 Barrel, Geissele Automatics CHF Chrome Lined Barrel - 5.56 - 13.9", Geissele Automatics CHF Chrome Lined Barrel - 5.56 - 14.5", Geissele Automatics CHF Chrome Lined Barrel - 5.56 - 16", Rosco Manufacturing Bloodline 10.5" M4 5.56 NATO, Rosco Manufacturing Bloodline 11.5" M4 5.56 NATO, Rosco Manufacturing Bloodline 12.5" M4 5.56 NATO
Handguard mount
- Handguards
- Aero Precision AR15 10.3" R-ONE M-LOK handguard, Aero Precision AR15 12.7" R-ONE M-LOK handguard, Aero Precision AR15 15" Enhanced M-LOK Handguard, Gen 2, Aero Precision AR15 15" R-ONE M-LOK handguard, Aero Precision AR15 15" S-ONE M-LOK Handguard, Aero Precision AR15 16.6" R-ONE M-LOK handguard, Aero Precision AR15 7.3" R-ONE M-LOK handguard, Aero Precision AR15 9.3" R-ONE M-LOK handguard, BCM MCMR-10 (M-LOK® Compatible* Modular Rail), BCM MCMR-13 (M-LOK® Compatible* Modular Rail), BCM MCMR-15 (M-LOK® Compatible* Modular Rail), BCM PMCR (Polymer M-LOK® Compatible Rail)* Carbine Length-BLACK, BCM PMCR (Polymer M-LOK® Compatible Rail)* Mid Length-BLACK, Expo Arms Free Float AR-15 Handguard - M-LOK - 15", Geissele Automatics 10.5" Super Modular Rail MK16 M-LOK, Geissele Automatics 13.5" Super Modular Rail MK16 M-LOK, Geissele Automatics 15" Super Modular Rail MK16 M-LOK, Magpul MOE SL® Hand Guard, Carbine-Length – AR15/M4, Magpul MOE SL® Hand Guard, Mid-Length – AR15/M4, Magpul MOE® M-LOK® Hand Guard, Carbine-Length – AR15/M4, Magpul MOE® M-LOK® Hand Guard, Mid-Length – AR15/M4, MAS Defense 12.62" NERO M-LOK FREE FLOAT, MAS Defense 15" NERO M-LOK FREE FLOAT, MAS Defense 9.87" NERO M-LOK FREE FLOAT, Midwest Industries AR-15/M16 Two Piece Drop-In Handguard, M-LOK® (Carbine), Midwest Industries AR-15/M16 Two Piece Drop-In Handguard, M-LOK® (Mid-Length), Midwest Industries Combat Rail One Piece Free Float Handguard, M-LOK™ (15")
- Barrel nuts
- BCM G.I. Barrel Nut - AR15, Spike's Tactical Delta Ring Assembly w/Mil-Spec Barrel Nut
Bolt carrier channel
Charging handle channel
- Charging handles
- Aero Precision AR15/M4 5.56 charging handle, BCM Ambidextrous MK2 Charging Handle - Large Latch (5.56mm/.223), Radian Weapons AR-15 / M16 Raptor-LT Ambidextrous Charging Handle, Radian Weapons Raptor Ambidextrous Charging Handle AR15/M16, Radian Weapons Raptor-SD Ambidextrous Charging Handle AR15/M16
Picatinny rail (MIL-STD-1913)
- Red dot mounts
- Aimpoint Duty RDS One-piece TNP Mount, 30 mm, Aimpoint LRP (Lever Release Picatinny) Mount with 39 mm Spacer, for Micro, Aimpoint One-piece Torsion Nut Mount and Spacer, 39 mm, Geissele Super Precision T1 Mount - 1.93" Height, Geissele Super Precision T1 Mount - Absolute Co-Witness, Geissele Super Precision T1 Mount - Lower 1/3 Co-Witness, Holosun 1.63 in lower 1/3 co-witness pedestal mount (HS-MOUNT-AR-RISER-ARO), Midwest Industries MK2 QD T2 Aimpoint Mount, Low, Midwest Industries MK2 QD T2 Aimpoint Mount, Lower 1/3 Cowitness, Midwest Industries MK2 QD T2 Aimpoint Mount, NV 2.26 in Height, Reptilia DOT MOUNT FOR AIMPOINT® MICRO – 1.93″ HEIGHT, Reptilia DOT MOUNT FOR AIMPOINT® MICRO – LOWER 1/3 (39MM HEIGHT), Scalarworks LEAP/01 Aimpoint Micro T-2 quick-detach mount, 1.42 in, Scalarworks LEAP/01 Aimpoint Micro T-2 quick-detach mount, 1.57 in, Scalarworks LEAP/01 Aimpoint Micro T-2 quick-detach mount, 1.93 in, Scalarworks LEAP/02 Aimpoint Micro T-2 quick-detach mount, 2.26 in, SIG Sauer M1913 I-BEAM Mount, 1.41 in absolute co-witness, SIG Sauer See-Through Riser Mount, 1.41 in absolute co-witness, Unity Tactical FAST Micro Mount, 2.26 in optical centerline
- Optics
- Aimpoint Patrol Rifle Optic (PRO) Red Dot Reflex Sight - QRP2 Mount, EOTECH HWS EXPS3 holographic weapon sight, 1-Dot Speed Ring, Holosun HS510C Open Reflex MRS Solar QD Mount
- Lights
- Olight Baldr S BL, Streamlight ProTac Rail Mount HL-X, SureFire Mini Scout Light Pro, SureFire Scout Light Pro Dual Fuel
- Backup sights
- Daniel Defense A1.5 Fixed Rear Sight, Daniel Defense Rail Mounted Fixed Front Sight, Magpul MBUS 3 Sight – Front, Magpul MBUS 3 Sight – Rear, Magpul MBUS Pro Sight – Front, Magpul MBUS Pro Sight – Rear
- Magnifiers
- EOTECH G33 Magnifier, STS Mount, EOTECH G45 Magnifier, STS Mount, Holosun HM3X 3× magnifier with flip mount
- Scope mounts
- Primary Arms Deluxe AR-15 Scope Mount - 30mm, Primary Arms SLx Cantilever 30mm Mount - 1.5", Reptilia AUS™ MOUNT - 30MM DIAMETER - 39MM HEIGHT, Scalarworks LEAP/08 quick-detach scope mount, 30 mm, 1.57 in, SIG SAUER ALPHA-MSR scope mount, 30 mm, Vortex Sport Cantilever 30mm Mount