Red dot mount
Aimpoint One-piece Torsion Nut Mount and Spacer, 39 mm
The mount Aimpoint sells the Duty RDS on for an AR-15: "Keyed Surface Mount: One-Piece Torsion Nut 39 mm Mount" (Aimpoint's sheet, ITEM NO. 200759); in the box, "1x Torsion nut mount and spacer (39mm)" (T.REX ARMS). A Micro-footprint dot screws to its top; the Duty RDS on it has its axis 39 mm over the rail, a Micro T-2 0.44 in lower. Its locking bar clamps it to the rail by one screw. The page linked is Bravo Company's for the pair: no page on file sells the mount alone.

- Weight
- 1.83 oz ± 0.035 oz Conflictworked out: {aimpoint-duty-rds.weight} - {aimpoint-duty-rds.sight_weight}Its sources span 1.8 oz to 2.03 oz.
- Lowest price
- Sold in the Aimpoint Duty RDS Red Dot Sight - One-piece Torsion Nut Mount, 39mm, not by itself
- Colour
- Black (placeholder)
- Drawn as
- modelled
- Maker's page
- bravocompanyusa.com
In “22RB .22 LR rifle”, a build on the start page, in place of its Holosun 1.63 in lower 1/3 co-witness pedestal mount (HS-MOUNT-AR-RISER-ARO).
Its figures
Every figure the site draws and checks it by, with where it came from. Open one for each source's reading, and why one is used where they differ.
The deck's top (the seam under the sight's foot, where a dot's base sits) above the rail's top0.506 in ± 0.017 in 12.9 mmProvisionalWorked out: {aimpoint-duty-rds.optical_axis_above_rail} - {aimpoint-duty-rds.axis_above_base}
Worked out 0.5064 in ± 0.017 in used
{aimpoint-duty-rds.optical_axis_above_rail} - {aimpoint-duty-rds.axis_above_base}, harvested
39 mm (1.535 in) less the Duty RDS's 1.029 in.
Aimpoint gives the mount's height only as the Duty RDS's axis on it: "Keyed Surface Mount: One-Piece Torsion Nut 39 mm Mount", its axis 39 mm over the rail (the sheet). Less the Duty RDS's own axis over its base it is the deck's height; another Micro-footprint dot on it stands as much higher or lower as its own axis is over its base: a Micro T-2 on it, 0.44 in lower.
The footprint's middle along the deck, ahead of the clamp's middle0 in ± 0.05 in 0 mmProvisionalWorked out: An assumption for the drawing, not a reading: no view shows the footprint's screws or lug. Their middle is taken to be the mount's, which is where the frame's origin is along the rail (the side outline's origin is the mount's middle over its rows, under the sight's foot, which is within a few hundredths as long: aimpoint-duty-rds's profiles.side and mount_length).
Worked out 0 in ± 0.05 in used
An assumption for the drawing, not a reading: no view shows the footprint's screws or lug. Their middle is taken to be the mount's, which is where the frame's origin is along the rail (the side outline's origin is the mount's middle over its rows, under the sight's foot, which is within a few hundredths as long: aimpoint-duty-rds's profiles.side and mount_length).
The mount's length along the rail2.045 in ± 0.015 in 51.9 mmProvisionalWorked out: {aimpoint-duty-rds.mount_length}
Worked out 2.045 in ± 0.015 in used
{aimpoint-duty-rds.mount_length}, harvested
Read on Aimpoint's left profile of the pair, in the sight's ledger.
How far the mount reaches below the rail's top0.4 in ± 0.03 in 10.2 mmProvisionalWorked out: {aimpoint-duty-rds.clamp_below_rail}
Worked out 0.4 in ± 0.03 in used
{aimpoint-duty-rds.clamp_below_rail}, harvested
Where the sheet's 39 mm puts the rail's top under the axis of the pair: the sight's ledger says how.
What it goes with
By the way it mounts, and the figures each part on file states: a part whose figures say it doesn't fit is left out, and one whose fit can't be checked from what is published is marked. A check is against published figures, not a guarantee.
Picatinny rail (MIL-STD-1913)
- Uppers
- Aero Precision M4E1 Enhanced Upper Receiver Stripped, Aero Precision M4E1 Threaded upper receiver, BCM M4 Upper Receiver Assembly (w/ Laser T-Markings), Expo Arms 7075 Stripped AR-15 Upper Receiver, Geissele Automatics Super Duty Stripped Upper Receiver, Nordic Components 22RB .22 LR upper, 16", Palmetto State Armory AR-15 Stripped Upper Receiver, Panzer Arms AR57 ULT Complete AR-15 Upper Receiver - 5.7x28mm - 12", Panzer Arms AR57 Ultra Light Tactical Complete AR-15 Upper Receiver - 5.7x28mm - 16"
- Handguards
- Aero Precision AR15 10.3" R-ONE M-LOK handguard, Aero Precision AR15 12.7" R-ONE M-LOK handguard, Aero Precision AR15 15" Enhanced M-LOK Handguard, Gen 2, Aero Precision AR15 15" R-ONE M-LOK handguard, Aero Precision AR15 15" S-ONE M-LOK Handguard, Aero Precision AR15 16.6" R-ONE M-LOK handguard, Aero Precision AR15 7.3" R-ONE M-LOK handguard, Aero Precision AR15 9.3" R-ONE M-LOK handguard, BCM MCMR-10 (M-LOK® Compatible* Modular Rail), BCM MCMR-13 (M-LOK® Compatible* Modular Rail), BCM MCMR-15 (M-LOK® Compatible* Modular Rail), Expo Arms Free Float AR-15 Handguard - M-LOK - 15", Geissele Automatics 10.5" Super Modular Rail MK16 M-LOK, Geissele Automatics 13.5" Super Modular Rail MK16 M-LOK, Geissele Automatics 15" Super Modular Rail MK16 M-LOK, MAS Defense 12.62" NERO M-LOK FREE FLOAT, MAS Defense 15" NERO M-LOK FREE FLOAT, MAS Defense 9.87" NERO M-LOK FREE FLOAT, Midwest Industries AR-15/M16 Two Piece Drop-In Handguard, M-LOK® (Carbine), Midwest Industries AR-15/M16 Two Piece Drop-In Handguard, M-LOK® (Mid-Length), Midwest Industries Combat Rail One Piece Free Float Handguard, M-LOK™ (15")
- Frames
- Taurus TX22 Gen 2 frame
- Rail sections
- Magpul M-LOK® Aluminum Rail, 3 Slots, Magpul M-LOK® Aluminum Rail, 5 Slots, Magpul M-LOK® Aluminum Rail, 7 Slots, Magpul M-LOK® Aluminum Rail, 9 Slots, Magpul M-LOK® Polymer Rail, 11 Slots, Magpul M-LOK® Polymer Rail, 3 Slots, Magpul M-LOK® Polymer Rail, 5 Slots, Magpul M-LOK® Polymer Rail, 7 Slots, Magpul M-LOK® Polymer Rail, 9 Slots