Handguard
Geissele Automatics 10.5" Super Modular Rail MK16 M-LOK
Geissele's 10.5 in free-float M-LOK handguard, with the barrel nut it mounts on. Sellers' pages: "Mounted to your AR-15 upper using the updated version of the proven Geissele Barrel Nut design"; "Anti-rotation tabs and set-screws ensure that your rail will not rotate"; "M1913 picatinny rail on top and M-LOK slots on every quadrant"; "precision machined using 7000 Series Aluminum" (Aerospace Arms; Brownells and Charlie's Custom Clones say 6061-T6), "Type 3 Hardcoat Anodize"; "The proprietary 2.25\" Geissele barrel nut ensures maximum surface contact with the upper receiver" (Huckleberry Arms). Its maker's own page isn't read (the site refuses the reader): the page linked is a seller's.

- Weight
- 12.6 oz ± 0.05 oz Conflictpublished: Aerospace Arms, Geissele Automatics 10.5" Super Modular Rail MK16 M-LOK - Black (05-1073B), Features and Specifications, a seller, read Oct 6, 2026Its sources span 12.55 oz to 12.85 oz.
- Lowest price
- $325.00 at Aerospace Arms, read Nov 21, 2026 (Black)
- Maker's number
- 05-1073B
- Colours
- Black, Desert Dirt Color
- Drawn as
- modelled
- Maker's page
- aerospacearms.com
In “Aero 5.56 carbine”, a build on the start page, in place of its Aero Precision AR15 15" R-ONE M-LOK handguard.
Its figures
Every figure the site draws and checks it by, with where it came from. Open one for each source's reading, and why one is used where they differ.
Weight, the handguard alone11 oz ± 0.5 ozCorroboratedPublished: Aerospace Arms, Geissele Automatics 10.5" Super Modular Rail MK16 M-LOK - Black (05-1073B), Features and Specifications, a seller, read Oct 6, 2026
Published “WEIGHT: 11oz (12.6oz w/ barrel nut)” used
Aerospace Arms, Geissele Automatics 10.5" Super Modular Rail MK16 M-LOK - Black (05-1073B), Features and Specifications, a seller, read Oct 6, 2026 the page, harvested Oct 6, 2026
Published “Weight 11 oz.”
Primary Arms, Geissele Automatics MK16 Free Float AR-15 Handguard - M-LOK - 10.5" (05-1073B), specifications, a seller, read Oct 6, 2026 the page, harvested Oct 6, 2026
Published “Weight 11 oz.”
Primary Arms, Geissele Automatics MK16 Free Float AR-15 Handguard - M-LOK - 10.5" - DDC (05-1073S), specifications, a seller, read Oct 6, 2026 the page, harvested Oct 6, 2026
Published “11 oz. weight (12.6 oz. w/ barrel nut)”
Mister Guns, Geissele Automatics Super Modular Rail MK16 10.5" M-LOK Black - 05-1073B, description, a seller, read Oct 6, 2026 the page, harvested Oct 6, 2026
Published “Weight 11 oz (12.6 oz w/ barrel nut)”
Huckleberry Arms, Geissele 10.5" Super Modular Rail MK16 M-LOK Black (05-1073B), specifications, a seller, read Oct 6, 2026 the page, harvested Oct 6, 2026
Published “10.5" WEIGHT: 11.2 oz ( 12.84oz w/barrel nut)”
Brownells, GEISSELE AUTOMATICS LLC AR-15 MK16 SUPER MODULAR RAILS M-LOK, Specs (one page for the four lengths, a weight for each), a seller, read Oct 6, 2026 the page, harvested Oct 6, 2026
The pair adopted for the weight on the rifle; a figure in whole ounces, which Brownells' 11.2 is inside.
The same two pairs' first figures: 11 oz on five pages (Primary Arms gives it alone, for each colour) and Brownells' 11.2.
Length, end to end (its rear face to its muzzle end, the tabs behind the rear face left out)10.505 in ± 0.05 in 266.8 mmCorroboratedPhoto: Primary Arms' gallery for 05-1073S, 05-1073S_02.jpg: the handguard alone in Desert Dirt Color, its left side seen level, muzzle to the left, 2200 x 1467
Published “LENGTH: 10.5"”
Aerospace Arms, Geissele Automatics 10.5" Super Modular Rail MK16 M-LOK - Black (05-1073B), Features and Specifications, a seller, read Oct 6, 2026 the page, harvested Oct 6, 2026
Published “Handguard Length 10.5”
Primary Arms, Geissele Automatics MK16 Free Float AR-15 Handguard - M-LOK - 10.5" (05-1073B), specifications, a seller, read Oct 6, 2026 the page, harvested Oct 6, 2026
Published “Length 10.5"”
Huckleberry Arms, Geissele 10.5" Super Modular Rail MK16 M-LOK Black (05-1073B), specifications, a seller, read Oct 6, 2026 the page, harvested Oct 6, 2026
Photo 10.505 in ± 0.05 in used
Primary Arms' gallery for 05-1073S, 05-1073S_02.jpg: the handguard alone in Desert Dirt Color, its left side seen level, muzzle to the left, 2200 x 1467, harvested
Scale: its own top rail's 25 slots at the Picatinny pitch (std.picatinny.slot_pitch): a quadratic fit of their centres, 69.92 px a pitch at the muzzle end and 68.41 at the rear. Read by the rail's front end (px 99, its near edge: true column 110.5) to its rear end (px 1968: true column 1954.2): rail coordinates -1.076 and 25.588, 26.66 pitches; the lens stood over column 950 and 31 in from the rifle's middle plane (the rail's notches narrow from 38 px there to 17.0 at the muzzle end and 14.8 at the rear, as its two edges part), so what stands z nearer the lens reads large about that column by 31 / (31 - z): 1.0263 on the side face, 1.0137 at the rail's near edge (scratch/m2.py)
Its own rail's 25 slots and two end lands count 10.505 in, which is what the model's rail and slots add up to; the sellers' 10.5 in agrees within its last digit.
The sellers' 10.5 in, and by its own rail it is that: 25 slots and a land at each end, 10.505 in. Its rail runs the whole length: on the level photo the rail's rear end and the body's rear face are one plane within 0.01 in once each is read at its own depth, and the rail's nose and the side faces' tips at the muzzle end within 0.01.
Width across the side faces (3 to 9 o'clock)1.59 in ± 0.005 in 40.4 mmCorroboratedPublished: Aerospace Arms, Geissele Automatics 10.5" Super Modular Rail MK16 M-LOK - Black (05-1073B), Features and Specifications, a seller, read Oct 6, 2026
Published “OUTER DIAMETER (DAQ*): 1.59" [...] *DAQ - Distance Across Quadrants” used
Aerospace Arms, Geissele Automatics 10.5" Super Modular Rail MK16 M-LOK - Black (05-1073B), Features and Specifications, a seller, read Oct 6, 2026 the page, harvested Oct 6, 2026
Published “Outer Diameter (DAQ*) 1.59"”
Huckleberry Arms, Geissele 10.5" Super Modular Rail MK16 M-LOK Black (05-1073B), specifications, a seller, read Oct 6, 2026 the page, harvested Oct 6, 2026
Published “1.26”/1.59” inner/outer diameter”
Mister Guns, Geissele Automatics Super Modular Rail MK16 10.5" M-LOK Black - 05-1073B, description, a seller, read Oct 6, 2026 the page, harvested Oct 6, 2026
Published “OUTER DIAMETER (DAQ*): 1.59"”
Brownells, GEISSELE AUTOMATICS LLC AR-15 MK16 SUPER MODULAR RAILS M-LOK, Specs (one page for the four lengths, a weight for each), a seller, read Oct 6, 2026 the page, harvested Oct 6, 2026
Four sellers state the one figure.
The sellers' "OUTER DIAMETER (DAQ*)" with "*DAQ - Distance Across Quadrants": the distance across two opposite faces that carry M-LOK slots.
Height (the rail's top to the bottom of the clamp block at its rear end)2.39 in ± 0.005 in 60.7 mmCorroboratedPublished: Aerospace Arms, Geissele Automatics 10.5" Super Modular Rail MK16 M-LOK - Black (05-1073B), Features and Specifications, a seller, read Oct 6, 2026
Published “HEIGHT: 2.39"” used
Aerospace Arms, Geissele Automatics 10.5" Super Modular Rail MK16 M-LOK - Black (05-1073B), Features and Specifications, a seller, read Oct 6, 2026 the page, harvested Oct 6, 2026
Published “Height 2.39"”
Huckleberry Arms, Geissele 10.5" Super Modular Rail MK16 M-LOK Black (05-1073B), specifications, a seller, read Oct 6, 2026 the page, harvested Oct 6, 2026
Published “2.39” height”
Mister Guns, Geissele Automatics Super Modular Rail MK16 10.5" M-LOK Black - 05-1073B, description, a seller, read Oct 6, 2026 the page, harvested Oct 6, 2026
Published “HEIGHT: 2.39"”
Brownells, GEISSELE AUTOMATICS LLC AR-15 MK16 SUPER MODULAR RAILS M-LOK, Specs (one page for the four lengths, a weight for each), a seller, read Oct 6, 2026 the page, harvested Oct 6, 2026
Photo 2.42 in ± 0.03 in
Primary Arms' gallery for 05-1073S, 05-1073S_02.jpg: the handguard alone in Desert Dirt Color, its left side seen level, muzzle to the left, 2200 x 1467, harvested
Scale: its own rail's slots at the rear end (68.4 px a pitch, 173.6 px/in on the middle plane; 176.0 at the rail's near edge and 178.2 on the side face). Read by the rail's tooth tops (row 521.3) to the clamp block's bottom edge (row 950) at columns 1854 to 1904: 428.7 px, each half read at its own depth about the image's middle row; the photo is from a little above (the teeth's tops show), which is what it reads large by (scratch/m2.py)
Four sellers state the one figure; the level photo reads it within 1.3% as the rail's top to the clamp block's bottom, from a little above.
What the sellers' 2.39 in spans is read on the level photo, as on the other two lengths': the rail's top to the bottom of the clamp block under the rear end.
Inside diameter1.26 in ± 0.005 in 32 mmCorroboratedPublished: Aerospace Arms, Geissele Automatics 10.5" Super Modular Rail MK16 M-LOK - Black (05-1073B), Features and Specifications, a seller, read Oct 6, 2026
Published “INNER DIAMETER: 1.26"” used
Aerospace Arms, Geissele Automatics 10.5" Super Modular Rail MK16 M-LOK - Black (05-1073B), Features and Specifications, a seller, read Oct 6, 2026 the page, harvested Oct 6, 2026
Published “Inner Diameter 1.26 in.”
Primary Arms, Geissele Automatics MK16 Free Float AR-15 Handguard - M-LOK - 10.5" (05-1073B), specifications, a seller, read Oct 6, 2026 the page, harvested Oct 6, 2026
Published “Inner Diameter 1.26 in.”
Primary Arms, Geissele Automatics MK16 Free Float AR-15 Handguard - M-LOK - 10.5" - DDC (05-1073S), specifications, a seller, read Oct 6, 2026 the page, harvested Oct 6, 2026
Published “Inner Diameter 1.26"”
Huckleberry Arms, Geissele 10.5" Super Modular Rail MK16 M-LOK Black (05-1073B), specifications, a seller, read Oct 6, 2026 the page, harvested Oct 6, 2026
Published “1.26”/1.59” inner/outer diameter”
Mister Guns, Geissele Automatics Super Modular Rail MK16 10.5" M-LOK Black - 05-1073B, description, a seller, read Oct 6, 2026 the page, harvested Oct 6, 2026
Five pages of four sellers state the one figure.
Sellers' "INNER DIAMETER". As on the other two lengths, the model takes it as the circle its flat inner walls touch.
Its rear face against the receiver's front face (negative: behind it)-0.445 in ± 0.04 in -11.3 mmConfirmedWorked out: 0in - {std.ar15.upper_barrel_thread_length}
Worked out -0.445 in ± 0.04 in used
0in - {std.ar15.upper_barrel_thread_length}, harvested
No page read says where it stops, and no photo of it mounted is on file. As the other two lengths: it slides back over its barrel nut, and its rear face is taken to meet the receiver's front shoulder, where the barrel-nut thread begins (std.ar15.upper_barrel_thread_length behind the front face), with no gap. A check: its rail's first slot then stands 0.01 in from where the receiver's own row of slots would continue (bcm-m4-upper: 13 slots from 1.31 in at the standard's pitch).
Its lower tabs' reach behind its rear face0.26 in ± 0.02 in 6.6 mmProvisionalWorked out: {geissele-mk16-15-handguard.tab_length}
Worked out 0.26 in ± 0.02 in used
{geissele-mk16-15-handguard.tab_length}, harvested
The family's: taken from the 15 in rail's ledger by reference (the sellers' pages give the one height, width and inside for every length of the MK16, and the same sentences for its barrel nut, tabs and set screws). On this length's level photo the lower tab's end (px 2024) stands 0.25 in behind the rear face's edge (px 1979) at the side face's scale.
The outline's rear end (its lower tabs' ends) against the receiver's front face (negative: behind it)-0.705 in ± 0.05 in -17.9 mmProvisionalWorked out: {.rear_face_x} - {.tab_length}
Worked out -0.705 in ± 0.05 in used
{.rear_face_x} - {.tab_length}, harvested
Length over all, its lower tabs' ends to its muzzle end10.765 in ± 0.06 in 273.4 mmProvisionalWorked out: {.length} + {.tab_length}
Worked out 10.765 in ± 0.06 in used
{.length} + {.tab_length}, harvested
Its lower tabs' top edge below the bore axis0.27 in ± 0.02 in 6.9 mmProvisionalWorked out: {geissele-mk16-15-handguard.tab_top_below_bore}
Worked out 0.27 in ± 0.02 in used
{geissele-mk16-15-handguard.tab_top_below_bore}, harvested
The family's: taken from the 15 in rail's ledger by reference (the sellers' pages give the one height, width and inside for every length of the MK16, and the same sentences for its barrel nut, tabs and set screws). Rows 787 to 852 on this length's level photo, the 15 in rail's within 0.03.
Its lower tabs' bottom edge below the bore axis0.64 in ± 0.02 in 16.3 mmProvisionalWorked out: {geissele-mk16-15-handguard.tab_bottom_below_bore}
Worked out 0.64 in ± 0.02 in used
{geissele-mk16-15-handguard.tab_bottom_below_bore}, harvested
The family's: taken from the 15 in rail's ledger by reference (the sellers' pages give the one height, width and inside for every length of the MK16, and the same sentences for its barrel nut, tabs and set screws).
A tab's set screw, its diameter as it shows from the side0.14 in ± 0.03 in 3.6 mmProvisionalWorked out: {geissele-mk16-15-handguard.tab_screw_d}
Worked out 0.14 in ± 0.03 in used
{geissele-mk16-15-handguard.tab_screw_d}, harvested
The family's: taken from the 15 in rail's ledger by reference (the sellers' pages give the one height, width and inside for every length of the MK16, and the same sentences for its barrel nut, tabs and set screws). The screw's round end is at px (2005, 835) on this length's level photo.
Its upper tabs' reach behind its rear face0.12 in ± 0.02 in 3 mmProvisionalWorked out: {geissele-mk16-15-handguard.tongue_length}
Worked out 0.12 in ± 0.02 in used
{geissele-mk16-15-handguard.tongue_length}, harvested
The family's: taken from the 15 in rail's ledger by reference (the sellers' pages give the one height, width and inside for every length of the MK16, and the same sentences for its barrel nut, tabs and set screws). This length's level photo reads 0.10 (px 1979 to 1997).
The opening between its two upper tabs0.638 in ± 0.03 in 16.2 mmCorroboratedWorked out: 2 * {bcm-m4-upper.side_half_width}
Worked out 0.638 in ± 0.03 in used
2 * {bcm-m4-upper.side_half_width}, harvested
As the other two lengths': not measured (no view shows it square on); the tabs stand beside a mil-spec receiver's flat sides under its rail and are drawn against those flats with no clearance. Aerospace Arms: "These handguards are designed to work with Mil-Spec M4 upper receivers. The compatibility with billet receiver sets is unknown."
Its upper tabs' bottom edge above the bore axis0.545 in ± 0.02 in 13.8 mmProvisionalWorked out: {geissele-mk16-15-handguard.tongue_bottom_above_bore}
Worked out 0.545 in ± 0.02 in used
{geissele-mk16-15-handguard.tongue_bottom_above_bore}, harvested
The family's: taken from the 15 in rail's ledger by reference (the sellers' pages give the one height, width and inside for every length of the MK16, and the same sentences for its barrel nut, tabs and set screws).
Its upper tabs' top edge above the bore axis0.727 in ± 0.02 in 18.5 mmProvisionalWorked out: {geissele-mk16-15-handguard.tongue_top_above_bore}
Worked out 0.727 in ± 0.02 in used
{geissele-mk16-15-handguard.tongue_top_above_bore}, harvested
The family's: taken from the 15 in rail's ledger by reference (the sellers' pages give the one height, width and inside for every length of the MK16, and the same sentences for its barrel nut, tabs and set screws).
Its rail's top above the bore axis1.2 in ± 0.02 in 30.5 mmCorroboratedWorked out: {geissele-mk16-15-handguard.rail_top_above_bore}
Worked out 1.2 in ± 0.02 in used
{geissele-mk16-15-handguard.rail_top_above_bore}, harvested
The family's: taken from the 15 in rail's ledger by reference (the sellers' pages give the one height, width and inside for every length of the MK16, and the same sentences for its barrel nut, tabs and set screws). This length's level photo reads the rail's tooth tops 1.22 in above the middle of the side rows' slots (rows 514.5 and 731 at the muzzle end, 179 px/in), from a little above.
The tube's bottom flat below the bore axis0.86 in ± 0.02 in 21.8 mmProvisionalWorked out: {geissele-mk16-15-handguard.body_bottom_below_bore}
Worked out 0.86 in ± 0.02 in used
{geissele-mk16-15-handguard.body_bottom_below_bore}, harvested
The family's: taken from the 15 in rail's ledger by reference (the sellers' pages give the one height, width and inside for every length of the MK16, and the same sentences for its barrel nut, tabs and set screws). This length's level photo reads the tube's bottom edge 0.86 in below the middle of the side rows' slots (rows 884 and 731 at 179 px/in).
The side faces' height (crease to crease)0.6 in ± 0.02 in 15.2 mmCorroboratedWorked out: {geissele-mk16-15-handguard.side_flat_height}
Worked out 0.6 in ± 0.02 in used
{geissele-mk16-15-handguard.side_flat_height}, harvested
The family's: taken from the 15 in rail's ledger by reference (the sellers' pages give the one height, width and inside for every length of the MK16, and the same sentences for its barrel nut, tabs and set screws).
The faces between the sides and the rail: where their normal points, about the bore from the top (12 o'clock) toward the side45° ± 2°ProvisionalWorked out: {geissele-mk16-135-handguard.upper_face_angle}
Worked out 45 deg ± 2 deg used
{geissele-mk16-135-handguard.upper_face_angle}, harvested
The family's section, read on the muzzle end of the 13.5 in rail (two views square on an end with a known size in frame): taken from that rail's ledger by reference. No view is square on this length's end; Primary Arms' view of this length from ahead (2b231cbaae86) shows the same end: the rail on its neck, the side faces, the faces between.
The faces between the sides and the bottom: where their normal points, about the bore from the top (12 o'clock) toward the side131.4° ± 1°CorroboratedWorked out: {geissele-mk16-135-handguard.lower_face_angle}
Worked out 131.4 deg ± 1 deg used
{geissele-mk16-135-handguard.lower_face_angle}, harvested
The family's section, read on the muzzle end of the 13.5 in rail (two views square on an end with a known size in frame): taken from that rail's ledger by reference. No view is square on this length's end; its view from ahead (2b231cbaae86) shows the lower faces longer than the upper ones and a bottom flat with the trough's notch in it, as the 13.5 in rail's.
The upper faces' distance from the bore axis, along their normal0.774 in ± 0.02 in 19.7 mmProvisionalWorked out: {.width} / 2 * sin({.upper_face_angle}) + {.side_flat_height} / 2 * cos({.upper_face_angle})
Worked out 0.774282 in ± 0.02 in used
{.width} / 2 * sin({.upper_face_angle}) + {.side_flat_height} / 2 * cos({.upper_face_angle}), harvested
Through the side faces' upper creases at the faces' angle.
The lower faces' distance from the bore axis, along their normal0.795 in ± 0.02 in 20.2 mmCorroboratedWorked out: {.width} / 2 * sin({.lower_face_angle}) - {.side_flat_height} / 2 * cos({.lower_face_angle})
Worked out 0.794732 in ± 0.02 in used
{.width} / 2 * sin({.lower_face_angle}) - {.side_flat_height} / 2 * cos({.lower_face_angle}), harvested
Through the side faces' lower creases at the faces' angle.
The bottom flat's width0.61 in ± 0.02 in 15.5 mmCorroboratedWorked out: {geissele-mk16-135-handguard.bottom_flat_width}
Worked out 0.61 in ± 0.02 in used
{geissele-mk16-135-handguard.bottom_flat_width}, harvested
The family's section, read on the muzzle end of the 13.5 in rail (two views square on an end with a known size in frame): taken from that rail's ledger by reference. No view is square on this length's end; a check on lower_face_angle, not what the model draws from.
Where the upper faces end and the neck under the rail begins, above the bore0.695 in ± 0.02 in 17.7 mmProvisionalWorked out: {geissele-mk16-15-handguard.neck_base_above_bore}
Worked out 0.695 in ± 0.02 in used
{geissele-mk16-15-handguard.neck_base_above_bore}, harvested
The family's: taken from the 15 in rail's ledger by reference (the sellers' pages give the one height, width and inside for every length of the MK16, and the same sentences for its barrel nut, tabs and set screws).
The slope between the upper faces and the neck's walls, its height0.08 in ± 0.02 in 2 mmProvisionalWorked out: {geissele-mk16-15-handguard.neck_chamfer_height}
Worked out 0.08 in ± 0.02 in used
{geissele-mk16-15-handguard.neck_chamfer_height}, harvested
The family's: taken from the 15 in rail's ledger by reference (the sellers' pages give the one height, width and inside for every length of the MK16, and the same sentences for its barrel nut, tabs and set screws).
The neck's width under the rail0.61 in ± 0.04 in 15.5 mmProvisionalWorked out: {geissele-mk16-15-handguard.neck_width}
Worked out 0.61 in ± 0.04 in used
{geissele-mk16-15-handguard.neck_width}, harvested
The family's: taken from the 15 in rail's ledger by reference (the sellers' pages give the one height, width and inside for every length of the MK16, and the same sentences for its barrel nut, tabs and set screws).
The channel under the rail (the gas tube's), its width0.47 in ± 0.04 in 11.9 mmProvisionalWorked out: {geissele-mk16-15-handguard.channel_width}
Worked out 0.47 in ± 0.04 in used
{geissele-mk16-15-handguard.channel_width}, harvested
The family's: taken from the 15 in rail's ledger by reference (the sellers' pages give the one height, width and inside for every length of the MK16, and the same sentences for its barrel nut, tabs and set screws).
The channel's roof below the rail's top0.18 in ± 0.03 in 4.6 mmProvisionalWorked out: {geissele-mk16-15-handguard.channel_roof_below_top}
Worked out 0.18 in ± 0.03 in used
{geissele-mk16-15-handguard.channel_roof_below_top}, harvested
The family's: taken from the 15 in rail's ledger by reference (the sellers' pages give the one height, width and inside for every length of the MK16, and the same sentences for its barrel nut, tabs and set screws).
The troughs along the inside of the bottom, the side faces and the upper faces: their width0.49 in ± 0.03 in 12.4 mmProvisionalWorked out: {geissele-mk16-135-handguard.trough_width}
Worked out 0.49 in ± 0.03 in used
{geissele-mk16-135-handguard.trough_width}, harvested
The family's section, read on the muzzle end of the 13.5 in rail (two views square on an end with a known size in frame): taken from that rail's ledger by reference. No view is square on this length's end; its view from ahead (2b231cbaae86) shows the notch of the bottom's trough in the muzzle face and the side walls' thin ends.
The wall a trough's floor leaves, its thickness0.094 in ± 0.02 in 2.4 mmProvisionalWorked out: {geissele-mk16-135-handguard.trough_wall}
Worked out 0.094 in ± 0.02 in used
{geissele-mk16-135-handguard.trough_wall}, harvested
The family's section, read on the muzzle end of the 13.5 in rail (two views square on an end with a known size in frame): taken from that rail's ledger by reference. No view is square on this length's end.
Slots in its top rail25ProvisionalPhoto: Primary Arms' gallery for 05-1073S, 05-1073S_02.jpg: the handguard alone in Desert Dirt Color, its left side seen level, muzzle to the left, 2200 x 1467
Photo 25 count used
Primary Arms' gallery for 05-1073S, 05-1073S_02.jpg: the handguard alone in Desert Dirt Color, its left side seen level, muzzle to the left, 2200 x 1467, harvested
Scale: none: a count. Read by the notches between the teeth along the top edge: 25, centres from px 184.9 to px 1846.7, each 68.6 to 70.2 px from the next with none missing; a longer tooth at the rear end and a short sloped one at the front (scratch/m2.py); 25 on the same rail's right side (9305c7dae050)
Its rail's rearmost slot (its centre) ahead of its rear face0.625 in ± 0.02 in 15.9 mmProvisionalPhoto: Primary Arms' gallery for 05-1073S, 05-1073S_02.jpg: the handguard alone in Desert Dirt Color, its left side seen level, muzzle to the left, 2200 x 1467
Photo 0.625 in ± 0.02 in used
Primary Arms' gallery for 05-1073S, 05-1073S_02.jpg: the handguard alone in Desert Dirt Color, its left side seen level, muzzle to the left, 2200 x 1467, harvested
Scale: its own top rail's 25 slots at the Picatinny pitch (std.picatinny.slot_pitch): a quadratic fit of their centres, 69.92 px a pitch at the muzzle end and 68.41 at the rear. Read by the rail's rear end (px 1968, its near edge: true column 1954.2, rail coordinate 25.588) behind the rearmost slot's centre (px 1846.7, coordinate 24): 1.588 pitches; the body's rear face (px 1979 on the side face: true column 1952.6) is the same plane within 0.01 in (scratch/m2.py)
The 13.5 in rail's reads 0.62: the family's rear end.
Its rail's rearmost slot (its centre) ahead of the receiver's front face0.18 in ± 0.045 in 4.6 mmProvisionalWorked out: {.rear_face_x} + {.rail_slot0_from_rear}
Worked out 0.18 in ± 0.045 in used
{.rear_face_x} + {.rail_slot0_from_rear}, harvested
Its rail's front end ahead of its last slot's centre0.424 in ± 0.02 in 10.8 mmProvisionalPhoto: Primary Arms' gallery for 05-1073S, 05-1073S_02.jpg: the handguard alone in Desert Dirt Color, its left side seen level, muzzle to the left, 2200 x 1467
Photo 0.424 in ± 0.02 in used
Primary Arms' gallery for 05-1073S, 05-1073S_02.jpg: the handguard alone in Desert Dirt Color, its left side seen level, muzzle to the left, 2200 x 1467, harvested
Scale: its own top rail's 25 slots at the Picatinny pitch (std.picatinny.slot_pitch): a quadratic fit of their centres, 69.92 px a pitch at the muzzle end and 68.41 at the rear. Read by the rail's front end (px 99, its near edge: true column 110.5, rail coordinate -1.076) ahead of the frontmost slot's centre (px 184.9, coordinate 0): 1.076 pitches; the side faces' tips (px 88 on the side face: true column 110.1) are the same plane (scratch/m2.py)
Shorter than the 13.5 in rail's 0.685: this length's last tooth is a short one, sloped off at its top (rail_nose_length).
The slope at the rail's front end, its length along the rail0.23 in ± 0.02 in 5.8 mmProvisionalPhoto: Primary Arms' gallery for 05-1073S, 05-1073S_02.jpg: the handguard alone in Desert Dirt Color, its left side seen level, muzzle to the left, 2200 x 1467
Photo 0.23 in ± 0.02 in used
Primary Arms' gallery for 05-1073S, 05-1073S_02.jpg: the handguard alone in Desert Dirt Color, its left side seen level, muzzle to the left, 2200 x 1467, harvested
Scale: its own rail's slots at the muzzle end, at the rail's near edge: 179.8 px/in. Read by the top edge leaves the tooth tops' level (row 515.5) at px 140 and reaches the front end at px 99: 41 px (scratch/m2.py)
The rail's top is sloped down to the muzzle end over its last quarter inch, as the 13.5 in rail's: a face of its own in Primary Arms' view from ahead (2b231cbaae86), which also shows a bevel down each side of it that isn't drawn.
The slope at the rail's front end, how far its front edge is below the rail's top0.09 in ± 0.02 in 2.3 mmProvisionalPhoto: Primary Arms' gallery for 05-1073S, 05-1073S_02.jpg: the handguard alone in Desert Dirt Color, its left side seen level, muzzle to the left, 2200 x 1467
Photo 0.09 in ± 0.02 in used
Primary Arms' gallery for 05-1073S, 05-1073S_02.jpg: the handguard alone in Desert Dirt Color, its left side seen level, muzzle to the left, 2200 x 1467, harvested
Scale: its own rail's slots at the muzzle end, at the rail's near edge: 179.8 px/in. Read by the top edge at the front end (row 531.1 at px 100) below the tooth tops (row 515.5): 15.6 px, a pixel more at the very end (scratch/m2.py)
M-LOK slots on each side face (3 and 9 o'clock)5ProvisionalPhoto: Primary Arms' gallery for 05-1073S, 05-1073S_02.jpg: the handguard alone in Desert Dirt Color, its left side seen level, muzzle to the left, 2200 x 1467
Photo 5 count used
Primary Arms' gallery for 05-1073S, 05-1073S_02.jpg: the handguard alone in Desert Dirt Color, its left side seen level, muzzle to the left, 2200 x 1467, harvested
Scale: none: a count. Read by the middle row's slots, light showing through each: five, 270 to 282 px apart (scratch/m2.py); five on the same rail's right side (9305c7dae050)
M-LOK slots on each lower face (between the sides and the bottom)5ProvisionalPhoto: Primary Arms' gallery for 05-1073S, 05-1073S_02.jpg: the handguard alone in Desert Dirt Color, its left side seen level, muzzle to the left, 2200 x 1467
Photo 5 count used
Primary Arms' gallery for 05-1073S, 05-1073S_02.jpg: the handguard alone in Desert Dirt Color, its left side seen level, muzzle to the left, 2200 x 1467, harvested
Scale: none: a count. Read by the lower row's slots, light showing through each: five, their ends within 0.02 in of the side row's (rail coordinates -0.96 to 14.78 against -0.89 to 14.80 for their front ends) (scratch/m2.py); five on the same rail's right side (9305c7dae050)
M-LOK slots on each upper face (between the sides and the rail)4ProvisionalPhoto: Primary Arms' gallery for 05-1073S, 05-1073S_02.jpg: the handguard alone in Desert Dirt Color, its left side seen level, muzzle to the left, 2200 x 1467
Photo 4 count used
Primary Arms' gallery for 05-1073S, 05-1073S_02.jpg: the handguard alone in Desert Dirt Color, its left side seen level, muzzle to the left, 2200 x 1467, harvested
Scale: none: a count. Read by the upper row's slots, light showing through each: four, each over one of the side row's front four (their rear ends at px 381, 661, 941, 1216 against the side row's 377, 663, 946, 1213), and behind them the socket's hole with light through it (px 1456 to 1492); four on the same rail's right side (9305c7dae050)
One fewer than the side faces: where the rearmost would be, the upper face carries a sling swivel socket.
M-LOK slots on its underside (6 o'clock)5ProvisionalWorked out: {.mlok_side_slots}
Worked out 5 count used
{.mlok_side_slots}, harvested
The row is the sellers' sentence ("M-LOK slots on every quadrant", Aerospace Arms and Primary Arms) and no photo of this length's: no view on file shows its underside, from below or from inside. The 13.5 in rail's foremost four are seen from inside its muzzle end at the side rows' stations, and this length's row is taken the same way: the side rows' five, which is what fits ahead of the clamp block (mlok_bottom_slot0_x). An assumption, not a count.
The underside's rearmost M-LOK slot (its centre) ahead of the receiver's front face2.815 in ± 0.06 in 71.5 mmProvisionalWorked out: {.mlok_side_slot0_x}
Worked out 2.815 in ± 0.06 in used
{.mlok_side_slot0_x}, harvested
Not seen: taken at the side rows' stations. The clamp block and its split take the rear of the bottom; the side rows' rearmost slot begins 2.63 in ahead of the rear face, 0.26 in ahead of where the block's front ramp ends on the level photo (2.37), so the row starts there with all five ahead of the block. An assumption.
The side faces' rearmost M-LOK slot (its centre) ahead of the rear face3.26 in ± 0.04 in 82.8 mmProvisionalPhoto: Primary Arms' gallery for 05-1073S, 05-1073S_02.jpg: the handguard alone in Desert Dirt Color, its left side seen level, muzzle to the left, 2200 x 1467
Photo 3.26 in ± 0.04 in used
Primary Arms' gallery for 05-1073S, 05-1073S_02.jpg: the handguard alone in Desert Dirt Color, its left side seen level, muzzle to the left, 2200 x 1467, harvested
Scale: its own top rail's 25 slots at the Picatinny pitch (std.picatinny.slot_pitch): a quadratic fit of their centres, 69.92 px a pitch at the muzzle end and 68.41 at the rear; the lens stood over column 950 and 31 in from the rifle's middle plane (the rail's notches narrow from 38 px there to 17.0 at the muzzle end and 14.8 at the rear, as its two edges part), so what stands z nearer the lens reads large about that column by 31 / (31 - z): 1.0263 on the side face, 1.0137 at the rail's near edge. Read by the side row's slots' own edges where they bound the light (the rear ends of the three ahead of the lens, the front ends of the two behind it), each brought to its true place: rail coordinates 2.950, 6.953, 10.928 and 11.717, 15.694, 3.98 to 4.00 pitches apart; the rearmost slot's rear end at 18.907 by both, 6.68 pitches (2.63 in) ahead of the rear face (25.588), its centre half a slot (std.mlok.slot_length) further. Read straight on the side face, the same slot's rear end (px 1509) is 2.634 in ahead of the rear face's edge (px 1979) at 178.4 px/in (scratch/m2.py)
Further forward than on the 13.5 in rail (3.10) and the 15 in (3.08): the rows are set from the muzzle end, where every length's foremost slot ends a third of an inch short of it (0.33 in here, 0.32 on the 13.5 in), and this length's five leave more of the body whole ahead of the clamp block.
The side and lower faces' rearmost M-LOK slot (its centre) ahead of the receiver's front face2.815 in ± 0.06 in 71.5 mmProvisionalWorked out: {.rear_face_x} + {.mlok_side_slot0_from_rear}
Worked out 2.815 in ± 0.06 in used
{.rear_face_x} + {.mlok_side_slot0_from_rear}, harvested
The upper faces' rearmost M-LOK slot (its centre) ahead of the receiver's front face4.39 in ± 0.06 in 111.5 mmProvisionalWorked out: {.mlok_side_slot0_x} + {std.mlok.slot_pitch}
Worked out 4.389803 in ± 0.06 in used
{.mlok_side_slot0_x} + {std.mlok.slot_pitch}, harvested
One slot pitch ahead of the side faces' rearmost: the upper rows have the side rows' front four.
The upper rows of slots, their middle line above the bore0.51 in ± 0.02 in 13 mmProvisionalWorked out: {geissele-mk16-15-handguard.mlok_upper_row_above_bore}
Worked out 0.51 in ± 0.02 in used
{geissele-mk16-15-handguard.mlok_upper_row_above_bore}, harvested
The family's: taken from the 15 in rail's ledger by reference (the sellers' pages give the one height, width and inside for every length of the MK16, and the same sentences for its barrel nut, tabs and set screws). This length's level photo has the upper row's light at rows 641 to 654 and the side row's at 715 to 748.
The lower rows of slots, their middle line below the bore0.565 in ± 0.02 in 14.4 mmProvisionalWorked out: {geissele-mk16-15-handguard.mlok_lower_row_below_bore}
Worked out 0.565 in ± 0.02 in used
{geissele-mk16-15-handguard.mlok_lower_row_below_bore}, harvested
The family's: taken from the 15 in rail's ledger by reference (the sellers' pages give the one height, width and inside for every length of the MK16, and the same sentences for its barrel nut, tabs and set screws).
The room inside its faces, from a face in to the barrel (what an M-LOK accessory's nuts may take)No value yetMissingNo source yet
Not sourced: it depends on the barrel and gas block under it, other parts. Its walls are 0.165 in by the sellers' two figures (1.59 across, 1.26 inside), 0.09 under a trough.
The sling swivel sockets (their centres) ahead of the rear face2.77 in ± 0.04 in 70.4 mmProvisionalWorked out: {geissele-mk16-15-handguard.socket_from_rear}
Worked out 2.77 in ± 0.04 in used
{geissele-mk16-15-handguard.socket_from_rear}, harvested
The family's: taken from the 15 in rail's ledger by reference (the sellers' pages give the one height, width and inside for every length of the MK16, and the same sentences for its barrel nut, tabs and set screws). This length's level photo has the socket's hole, light through it, at px 1456 to 1492: its centre on the near face 2.76 in ahead of the rear face once the far face's shift is taken out.
The sling swivel sockets' centres above the bore0.585 in ± 0.02 in 14.9 mmProvisionalWorked out: {geissele-mk16-15-handguard.socket_above_bore}
Worked out 0.585 in ± 0.02 in used
{geissele-mk16-15-handguard.socket_above_bore}, harvested
The family's: taken from the 15 in rail's ledger by reference (the sellers' pages give the one height, width and inside for every length of the MK16, and the same sentences for its barrel nut, tabs and set screws).
A sling swivel socket's cup, its outside diameter0.545 in ± 0.02 in 13.8 mmProvisionalWorked out: {geissele-mk16-15-handguard.socket_ring_d}
Worked out 0.545 in ± 0.02 in used
{geissele-mk16-15-handguard.socket_ring_d}, harvested
The family's: taken from the 15 in rail's ledger by reference (the sellers' pages give the one height, width and inside for every length of the MK16, and the same sentences for its barrel nut, tabs and set screws).
A sling swivel socket's hole, its diameter0.31 in ± 0.03 in 7.9 mmProvisionalWorked out: {geissele-mk16-15-handguard.socket_hole_d}
Worked out 0.31 in ± 0.03 in used
{geissele-mk16-15-handguard.socket_hole_d}, harvested
The family's: taken from the 15 in rail's ledger by reference (the sellers' pages give the one height, width and inside for every length of the MK16, and the same sentences for its barrel nut, tabs and set screws).
The front cross bolt (its centre) ahead of the rear face1.57 in ± 0.03 in 39.9 mmProvisionalWorked out: {geissele-mk16-15-handguard.cross_bolt_front_from_rear}
Worked out 1.57 in ± 0.03 in used
{geissele-mk16-15-handguard.cross_bolt_front_from_rear}, harvested
The family's: taken from the 15 in rail's ledger by reference (the sellers' pages give the one height, width and inside for every length of the MK16, and the same sentences for its barrel nut, tabs and set screws). This length's level photo has the plate's front hole at px (1700, 868): 1.564 in ahead of the rear face's edge (px 1979) at the side face's scale.
The rear cross bolt (its centre) ahead of the rear face0.55 in ± 0.03 in 14 mmProvisionalWorked out: {geissele-mk16-15-handguard.cross_bolt_rear_from_rear}
Worked out 0.55 in ± 0.03 in used
{geissele-mk16-15-handguard.cross_bolt_rear_from_rear}, harvested
The family's: taken from the 15 in rail's ledger by reference (the sellers' pages give the one height, width and inside for every length of the MK16, and the same sentences for its barrel nut, tabs and set screws). This length's level photo has the plate's rear hole at px (1880, 893): 0.555 in ahead of the rear face's edge.
The front cross bolt's centre below the bore0.745 in ± 0.02 in 18.9 mmProvisionalWorked out: {geissele-mk16-15-handguard.cross_bolt_front_below_bore}
Worked out 0.745 in ± 0.02 in used
{geissele-mk16-15-handguard.cross_bolt_front_below_bore}, harvested
The family's: taken from the 15 in rail's ledger by reference (the sellers' pages give the one height, width and inside for every length of the MK16, and the same sentences for its barrel nut, tabs and set screws).
The rear cross bolt's centre below the bore0.835 in ± 0.02 in 21.2 mmProvisionalWorked out: {geissele-mk16-15-handguard.cross_bolt_rear_below_bore}
Worked out 0.835 in ± 0.02 in used
{geissele-mk16-15-handguard.cross_bolt_rear_below_bore}, harvested
The family's: taken from the 15 in rail's ledger by reference (the sellers' pages give the one height, width and inside for every length of the MK16, and the same sentences for its barrel nut, tabs and set screws).
A cross bolt's threaded hole in the left side's plate, its diameter0.21 in ± 0.02 in 5.3 mmProvisionalWorked out: {geissele-mk16-15-handguard.cross_bolt_hole_d}
Worked out 0.21 in ± 0.02 in used
{geissele-mk16-15-handguard.cross_bolt_hole_d}, harvested
The family's: taken from the 15 in rail's ledger by reference (the sellers' pages give the one height, width and inside for every length of the MK16, and the same sentences for its barrel nut, tabs and set screws).
A cross bolt's Torx head on the right side, its diameter0.32 in ± 0.03 in 8.1 mmProvisionalWorked out: {geissele-mk16-15-handguard.cross_bolt_head_d}
Worked out 0.32 in ± 0.03 in used
{geissele-mk16-15-handguard.cross_bolt_head_d}, harvested
The family's: taken from the 15 in rail's ledger by reference (the sellers' pages give the one height, width and inside for every length of the MK16, and the same sentences for its barrel nut, tabs and set screws). Primary Arms' photo of this length's right side (9305c7dae050) shows the two Torx heads standing in their counterbores.
A cross bolt's counterbore on the right side, its diameter0.46 in ± 0.03 in 11.7 mmProvisionalWorked out: {geissele-mk16-15-handguard.cross_bolt_counterbore_d}
Worked out 0.46 in ± 0.03 in used
{geissele-mk16-15-handguard.cross_bolt_counterbore_d}, harvested
The family's: taken from the 15 in rail's ledger by reference (the sellers' pages give the one height, width and inside for every length of the MK16, and the same sentences for its barrel nut, tabs and set screws).
The clamp block's split along its underside, its width0.51 in ± 0.05 in 13 mmProvisionalWorked out: {geissele-mk16-15-handguard.clamp_gap_width}
Worked out 0.51 in ± 0.05 in used
{geissele-mk16-15-handguard.clamp_gap_width}, harvested
The family's: taken from the 15 in rail's ledger by reference (the sellers' pages give the one height, width and inside for every length of the MK16, and the same sentences for its barrel nut, tabs and set screws).
The left side's nut plate, each end's width round its bolt hole0.52 in ± 0.03 in 13.2 mmProvisionalWorked out: {geissele-mk16-15-handguard.plate_lobe_d}
Worked out 0.52 in ± 0.03 in used
{geissele-mk16-15-handguard.plate_lobe_d}, harvested
The family's: taken from the 15 in rail's ledger by reference (the sellers' pages give the one height, width and inside for every length of the MK16, and the same sentences for its barrel nut, tabs and set screws).
The nut plate's bar between its two ends, its height0.2 in ± 0.03 in 5.1 mmProvisionalWorked out: {geissele-mk16-15-handguard.plate_bar_height}
Worked out 0.2 in ± 0.03 in used
{geissele-mk16-15-handguard.plate_bar_height}, harvested
The family's: taken from the 15 in rail's ledger by reference (the sellers' pages give the one height, width and inside for every length of the MK16, and the same sentences for its barrel nut, tabs and set screws).
What it goes with
By the way it mounts, and the figures each part on file states: a part whose figures say it doesn't fit is left out, and one whose fit can't be checked from what is published is marked. A check is against published figures, not a guarantee.
Handguard mount
Picatinny rail (MIL-STD-1913)
- Red dot mounts
- Aimpoint Duty RDS One-piece TNP Mount, 30 mm, Aimpoint LRP (Lever Release Picatinny) Mount with 39 mm Spacer, for Micro, Aimpoint One-piece Torsion Nut Mount and Spacer, 39 mm, Geissele Super Precision T1 Mount - 1.93" Height, Geissele Super Precision T1 Mount - Absolute Co-Witness, Geissele Super Precision T1 Mount - Lower 1/3 Co-Witness, Holosun 1.63 in lower 1/3 co-witness pedestal mount (HS-MOUNT-AR-RISER-ARO), Midwest Industries MK2 QD T2 Aimpoint Mount, Low, Midwest Industries MK2 QD T2 Aimpoint Mount, Lower 1/3 Cowitness, Midwest Industries MK2 QD T2 Aimpoint Mount, NV 2.26 in Height, Reptilia DOT MOUNT FOR AIMPOINT® MICRO – 1.93″ HEIGHT, Reptilia DOT MOUNT FOR AIMPOINT® MICRO – LOWER 1/3 (39MM HEIGHT), Scalarworks LEAP/01 Aimpoint Micro T-2 quick-detach mount, 1.42 in, Scalarworks LEAP/01 Aimpoint Micro T-2 quick-detach mount, 1.57 in, Scalarworks LEAP/01 Aimpoint Micro T-2 quick-detach mount, 1.93 in, Scalarworks LEAP/02 Aimpoint Micro T-2 quick-detach mount, 2.26 in, SIG Sauer M1913 I-BEAM Mount, 1.41 in absolute co-witness, SIG Sauer See-Through Riser Mount, 1.41 in absolute co-witness, Unity Tactical FAST Micro Mount, 2.26 in optical centerline
- Optics
- Aimpoint Patrol Rifle Optic (PRO) Red Dot Reflex Sight - QRP2 Mount, EOTECH HWS EXPS3 holographic weapon sight, 1-Dot Speed Ring, Holosun HS510C Open Reflex MRS Solar QD Mount
- Lights
- Olight Baldr S BL, Streamlight ProTac Rail Mount HL-X, SureFire Mini Scout Light Pro, SureFire Scout Light Pro Dual Fuel
- Backup sights
- Daniel Defense A1.5 Fixed Rear Sight, Daniel Defense Rail Mounted Fixed Front Sight, Magpul MBUS 3 Sight – Front, Magpul MBUS 3 Sight – Rear, Magpul MBUS Pro Sight – Front, Magpul MBUS Pro Sight – Rear
- Magnifiers
- EOTECH G33 Magnifier, STS Mount, EOTECH G45 Magnifier, STS Mount, Holosun HM3X 3× magnifier with flip mount
- Scope mounts
- Primary Arms Deluxe AR-15 Scope Mount - 30mm, Primary Arms SLx Cantilever 30mm Mount - 1.5", Reptilia AUS™ MOUNT - 30MM DIAMETER - 39MM HEIGHT, Scalarworks LEAP/08 quick-detach scope mount, 30 mm, 1.57 in, SIG SAUER ALPHA-MSR scope mount, 30 mm, Vortex Sport Cantilever 30mm Mount
M-LOK
- Hand stops
- BCM KAG (M-LOK® Compatible*) (fit unchecked), Magpul M-LOK Hand Stop (fit unchecked), Magpul M-LOK Index Panel (fit unchecked)
- Vertical grips
- BCM Vertical Grip Mod 3 (M-LOK® Compatible*) (fit unchecked), Magpul M-LOK MVG vertical grip (fit unchecked)
- Lights
- Cloud Defensive REIN (fit unchecked), Streamlight ProTac Rail Mount HL-X (fit unchecked), SureFire Mini Scout Light Pro (fit unchecked), SureFire Scout Light Pro Dual Fuel (fit unchecked)
- Rail sections
- Magpul M-LOK® Aluminum Rail, 3 Slots (fit unchecked), Magpul M-LOK® Aluminum Rail, 5 Slots (fit unchecked), Magpul M-LOK® Aluminum Rail, 7 Slots (fit unchecked), Magpul M-LOK® Aluminum Rail, 9 Slots (fit unchecked), Magpul M-LOK® Polymer Rail, 11 Slots (fit unchecked), Magpul M-LOK® Polymer Rail, 3 Slots (fit unchecked), Magpul M-LOK® Polymer Rail, 5 Slots (fit unchecked), Magpul M-LOK® Polymer Rail, 7 Slots (fit unchecked), Magpul M-LOK® Polymer Rail, 9 Slots (fit unchecked)
- Adapter plates
- Magpul M-LOK Hand Stop MOE Adapter (fit unchecked)
- Sling mounts
- Magpul M-LOK QD Sling Mount (fit unchecked)
- Rail covers
- Magpul M-LOK Rail Cover Type 2 (fit unchecked)
Prices on file
Each seller's latest reading of its own page: before tax and shipping, and not a quote. The pages are read again every night.
- Aerospace Arms $325.00 Black Nov 21, 2026, in stock that day
- Primary Arms $325.00 Black Nov 21, 2026, in stock that day
- Primary Arms $350.00 Desert Dirt Color Nov 21, 2026, in stock that day
- Aerospace Arms $350.00 Desert Dirt Color Nov 21, 2026, out of stock that day
- Rifle Supply $350.99 Desert Dirt Color Nov 21, 2026, out of stock that day