Rail cover
Magpul M-LOK Rail Cover Type 2
One of Magpul's M-LOK Rail Covers, Type 2: a low two-piece polymer cover with the TSP texture for one unused M-LOK slot on an aluminum handguard. Its base drops into the slot and its centre locking tab pushes down and snaps in; a pointed tool or a cartridge's tip in one of its four windows lets it go. MAG603 is the pack of six; one comes in the M-LOK Hand Stop Kit (MAG608). Black, FDE, ODG, Stealth Gray, and in the pack Modified Coyote Brown. Magpul: not for its MOE M-LOK, MOE SL or SGA forends, and it may not fit a free-float handguard with a wider, flatter profile.

- Weight
- 0.15 oz ± 0.005 oz Provisionalpublished: Wing Tactical, Magpul M-LOK Handstop Kit (MAG-608), Specifications (source of the figures unstated), a seller, read Oct 2, 2026
- Lowest price
- Sold in the Magpul M-LOK Hand Stop Kit, not by itself
- Maker's number
- MAG603
- Colours
- Black, FDE, ODG, Stealth Gray, Modified Coyote Brown
- Drawn as
- modelled
- Maker's page
- magpul.com
Added to “22RB .22 LR rifle”, a build on the start page, where the designer starts a new rail cover.
Its figures
Every figure the site draws and checks it by, with where it came from. Open one for each source's reading, and why one is used where they differ.
Overall length (along the handguard)1.56 in ± 0.006 in 39.6 mmCorroboratedPhoto: Supplied in chat 2026-10-02: a gallery image of an M-LOK handguard, straight side view, the hand stop kit on its bottom face and a row of Type 2 covers face on along its side face, rail teeth along the top, 2796 x 1290; a copy of the hand stop's
Photo 1.56 in ± 0.006 in used
Supplied in chat 2026-10-02: a gallery image of an M-LOK handguard, straight side view, the hand stop kit on its bottom face and a row of Type 2 covers face on along its side face, rail teeth along the top, 2796 x 1290; a copy of the hand stop's, from the site owner
Scale: the covers' own pitch along the side face: the gaps between four covers in a row have their middles at u 671.96, 1217.20, 1762.81 and 2308.02 (rows 342 to 356), 545.2, 545.6 and 545.2 px apart, taken as the M-LOK slot pitch (std.mlok.slot_pitch, 40 mm: one cover to a slot): 346.3 px/in in the plane of the covers' edges. Read by one pitch less the gap between two covers, read where the background shows through it beside the handguard's face: u 1214.6 to 1219.7 at the half level on rows 349 to 356 of the seam at the image's middle, 5.1 px (5.1 and 5.2 px at the seams either side), which is 0.0147 in. ± 2 px on the gap's two edges
Photo 1.564 in ± 0.012 in
US D755,332 S (Magpul, 'Slot cover set for a firearm'), FIG. 15 right side elevation of the set assembled, 300 dpi, harvested
Scale: the two lugs under the cover (broken lines: u 790 to 991 and 1512 to 1713), their middles 722 px apart, taken as the M-LOK interval (std.mlok.interval, 20 mm). Read by the side elevation's length, 1434 px between the traced outline's two ends (u 534.5 and 1968.5), over the lugs' spacing. Nothing published says the lugs stand an interval apart (both drop into one slot): a check on the scale, not its source. ± 4 px on the lugs' middles and that assumption
Read on a picture of the product installed, against the slot pitch in its own plane. The patent's side elevation, scaled by its own lugs as the M-LOK interval, says 0.004 in more, inside both ±; and at the adopted length the patent's lugs read 0.270 in across for a 0.276 in slot (lug_width) and the cover's width reads what the image has (width).
Less than the slot pitch by 0.015 in: two covers in neighbouring slots stand that far apart, as the image and Magpul's own photos of a row show them (a hairline between each two).
Height (how far it stands off the handguard's face)0.136 in ± 0.006 in 3.5 mmCorroboratedPhoto: US D755,332 S (Magpul, 'Slot cover set for a firearm'), FIG. 16 front elevation of the set assembled, 300 dpi
Published “Covers protrude just over 1/8" above rail to maintain a low profile”
Magpul, M-LOK Rail Covers, Type 2 (MAG603), Features; the same page's banner: "Covers barely protrude more than 1/8" above the rail surface", the maker, read Oct 5, 2026 the page, harvested Oct 5, 2026
Published “a protrusion that’s only slightly more than 1/8” from the mounting surface to maintain its low-profile”
Magpul, M-LOK Rail Covers, Type 2, information sheet (MAG603 GIS, 2025), p. 1; p. 2: "Covers protrude only 1/8” above the rail surface", the maker, read Oct 5, 2026 the page, harvested Oct 5, 2026
Photo 0.136 in ± 0.006 in used
US D755,332 S (Magpul, 'Slot cover set for a firearm'), FIG. 16 front elevation of the set assembled, 300 dpi, harvested
Scale: frame from the outline's two sides on the pad's level at the cover's width (920.1 px/in; the side elevation on the same sheet, scaled by the length, is 919.2). Read by y_max of the traced outline (tools/trace.py); the patent's end elevation at the cover's width: the pad under its middle (the face that bears on the handguard, v 2587.5) up to the crown's top (v 2462.5): 125 px
The maker gives a fraction and says 'just over' it; the patent's end elevation at the cover's own scale gives the figure a model needs, and it is just over 1/8 in: 0.011 in over.
The crown of the locking tab above the mounting face, which is the flat pad under the cover's middle (mounting_flat_width); the wings either side hang below that face (wing_drop). The maker's figure is a fraction said with 'just over', 'barely more than' and 'slightly more than': its ± here covers a sixteenth above it and nothing is claimed below.
Width (side to side)1.039 in ± 0.008 in 26.4 mmCorroboratedPhoto: US D755,332 S (Magpul, 'Slot cover set for a firearm'), FIG. 17 top plan of the set assembled, 300 dpi
Photo 1.039 in ± 0.008 in used
US D755,332 S (Magpul, 'Slot cover set for a firearm'), FIG. 17 top plan of the set assembled, 300 dpi, harvested
Scale: scale from magpul-mlok-rail-cover-type-2.length = 1.56 in (x-extent 1501 px → 962.2 px/in). Read by height of the traced outline (tools/trace.py); the patent's plan at the cover's length: across the wings' two edges
Photo 1.036 in ± 0.008 in
Supplied in chat 2026-10-02: a gallery image of an M-LOK handguard, straight side view, the hand stop kit on its bottom face and a row of Type 2 covers face on along its side face, rail teeth along the top, 2796 x 1290; a copy of the hand stop's, from the site owner
Scale: the covers' own pitch along the side face in the same image (545.35 px to the M-LOK slot pitch, std.mlok.slot_pitch: 346.3 px/in in the plane of the covers' edges; the length's reading). Read by a cover's two long edges, face on: the upper where its lit texture begins under the handguard's shadow line (row 322 ± 1.5; the line is rows 318 to 321) and the lower against the bright band under the row (row 680.9 at the half level, columns 800 and 1400): 358.9 px. Both edges are the wings' tips, in one plane; the face is square to the lens (the row's three pitches agree within 0.4 px either side of the image's middle)
Line art, whole and orthographic, and the outline the model is built from. The image of the product agrees within 0.003 in: the patent's proportions are the product's.
No published figure. The patent's two sheets agree with each other too: the end elevation is 956 px across where the side elevation on its sheet is 1434 long (0.6667), the plan 1000 by 1501 (0.6662).
M-LOK slots it fills1ConflictPublished: Magpul, M-LOK Rail Covers, Type 2 (MAG603), Features, the maker, read Oct 5, 2026
Published “One cover fills one M-LOK slot, with six covers per package” used
Magpul, M-LOK Rail Covers, Type 2 (MAG603), Features, the maker, read Oct 5, 2026 the page, harvested Oct 5, 2026
Published “The hand stop occupies two M-LOK slots, the index panel one slot, and the rail cover spans two.”
rifleconfigurator.com, Magpul M-LOK Hand Stop Kit (a configurator site; source of the statement unstated; the page is on file with the hand stop's seed), a review, read Oct 2, 2026 the page, harvested Oct 2, 2026
The maker's own sentence, said three ways, and what its pictures of a row show: one cover to a slot, a hairline between each two. The site's statement is unattributed, and a cover 40 mm long can't span two slots 40 mm apart.
magpul and configurator differ by 1 beyond what each states it is good to.
Magpul says it three times: the page's "each cover can fill one M-LOK slot and are sold six to a package", its feature list (below), and the information sheet's "Includes six panels, each covering one M-LOK slot." The patent agrees: its two lugs stand 0.78 in apart and 1.0 in over their outer ends, inside one 32 mm slot. A configurator site's two slots (said of the kit's cover, unattributed) is kept as a conflict.
Reach inside the handguard (below the mounting face, locked)0.214 in ± 0.02 in 5.4 mmProvisionalPhoto: US D755,332 S (Magpul, 'Slot cover set for a firearm'), FIG. 16 front elevation of the set assembled, 300 dpi
Photo 0.214 in ± 0.02 in used
US D755,332 S (Magpul, 'Slot cover set for a firearm'), FIG. 16 front elevation of the set assembled, 300 dpi, harvested
Scale: the traced end elevation's own scale (profiles.front: the cover's width, 920.1 px/in). Read by the lowest of the broken lines under the pad (the tab's legs' feet, v 2784) below the pad's level (v 2587.5): 196.5 px
No published figure. The patent draws the two lugs and the locking tab's legs in them in broken lines, which it says show 'environment and unclaimed features': the only drawing of what stands in the slot, read at the cover's scale. The side elevation has the same reach (198 px at 919.2 px/in: 0.215). Whether the legs' feet stand lower or spread once the tab is home isn't drawn; the ± covers a design patent's broken lines.
Section height: the crown to the wings' tips0.247 in ± 0.006 in 6.3 mmProvisionalPhoto: US D755,332 S (Magpul, 'Slot cover set for a firearm'), FIG. 15 right side elevation of the set assembled, 300 dpi
Photo 0.247 in ± 0.006 in used
US D755,332 S (Magpul, 'Slot cover set for a firearm'), FIG. 15 right side elevation of the set assembled, 300 dpi, harvested
Scale: frame from the reviewed holes rear, front (919.2 px/in, rms 0.000 in over 2 points). Read by height of the traced outline (tools/trace.py); the patent's side elevation at the cover's length: the crown's top to the wings' tips
The whole height of the cover seen from its side: its height above the mounting face and the wings' drop below it. Traced on the patent's side elevation; the end elevation on the same sheet has the same height (227 px each). The user's image shows three covers this way on the handguard's bottom face: 66 to 74 px there from the wing's tip (dark on the dark handguard: the shadow line on rows 709 to 717) to the crown (row 782, or 789.5 under a grey band), 0.20 to 0.22 in at that face's 337.6 px/in. Short of this figure by about what the picture's perspective takes (the near wing's tip stands half an inch nearer the lens than the crown, three quarters of an inch under its axis: 0.02 to 0.04 in at a lens 11 to 17 in away): a loose check, not a measurement.
Wings' tips below the mounting face0.111 in ± 0.006 in 2.8 mmProvisionalPhoto: US D755,332 S (Magpul, 'Slot cover set for a firearm'), FIG. 16 front elevation of the set assembled, 300 dpi
Photo 0.111 in ± 0.006 in used
US D755,332 S (Magpul, 'Slot cover set for a firearm'), FIG. 16 front elevation of the set assembled, 300 dpi, harvested
Scale: frame from the reviewed holes left, right (920.1 px/in, rms 0.000 in over 2 points). Read by −y_min of the traced outline (tools/trace.py); the patent's end elevation at the cover's width: the wings' tips below the pad under its middle
Each wing slopes down past the mounting face, over the handguard's corner beside the M-LOK face. Magpul's sentences about it: "May not fit some free-float aluminum handguards that have wider, flatter profile" (the page) and "may not be compatible with free-float hand guards that have a wider and flatter profile, as they will not seat deep enough to allow the center portion to lock down" (the information sheet).
Mounting face: the pad under the cover's middle, across0.611 in ± 0.012 in 15.5 mmProvisionalPhoto: US D755,332 S (Magpul, 'Slot cover set for a firearm'), FIG. 16 front elevation of the set assembled, 300 dpi
Photo 0.611 in ± 0.012 in used
US D755,332 S (Magpul, 'Slot cover set for a firearm'), FIG. 16 front elevation of the set assembled, 300 dpi, harvested
Scale: the traced end elevation's own scale (profiles.front: the cover's width, 920.1 px/in). Read by the flat between the two beads' feet on the traced outline: z -0.305 to +0.306. The pad's heavy line itself runs from u 963 to 1536 (573 px, 0.623 in), into the beads: the ± covers it
What bears on a handguard's M-LOK face: a flat pad under the cover's middle, a bead at each of its edges standing 0.011 in above it (into the cover), and beyond each bead a wing's underside rising from its tip at about 34 degrees. A face no wider than the pad with a corner falling away either side takes the cover flat; on a flat wider than about 0.70 in (where the wings' undersides come down to the pad's level) the wings bear first and the lugs don't reach: the maker's 'wider, flatter profile'.
Lugs under the pad, across (the slot's width they stand in)0.27 in ± 0.006 in 6.9 mmProvisionalPhoto: US D755,332 S (Magpul, 'Slot cover set for a firearm'), FIG. 16 front elevation of the set assembled, 300 dpi
Photo 0.27 in ± 0.006 in used
US D755,332 S (Magpul, 'Slot cover set for a firearm'), FIG. 16 front elevation of the set assembled, 300 dpi, harvested
Scale: the traced end elevation's own scale (profiles.front: the cover's width, 920.1 px/in). Read by the lug's two sides just under the pad (broken lines, u 1127.5 and 1375.5 on rows 2608 to 2656): 248 px
A check on the scale that owes nothing to the image: the lugs drop into an M-LOK slot, 7 mm (0.276 in) wide. Lower down the broken lines are 255 px across (0.277 in): the latches that snap under the slot's edges.
Lugs under the pad, middle to middle along the cover0.785 in ± 0.006 in 19.9 mmProvisionalPhoto: US D755,332 S (Magpul, 'Slot cover set for a firearm'), FIG. 15 right side elevation of the set assembled, 300 dpi
Photo 0.785 in ± 0.006 in used
US D755,332 S (Magpul, 'Slot cover set for a firearm'), FIG. 15 right side elevation of the set assembled, 300 dpi, harvested
Scale: the traced side elevation's own scale (profiles.side: the cover's length, 919.2 px/in). Read by the two lugs' middles (broken lines: u 790 to 991 and 1512 to 1713): 722 px; ± 4 px
The M-LOK interval (20 mm, 0.787 in) within 0.002 in, as the four windows over them are (0.787 in on the plan). Each lug is 0.219 in long and the two span 1.00 in over their outer ends: inside one slot (32 mm), with room to spare along it.
What it goes with
By the way it mounts, and the figures each part on file states: a part whose figures say it doesn't fit is left out, and one whose fit can't be checked from what is published is marked. A check is against published figures, not a guarantee.
M-LOK
- Uppers
- Nordic Components 22RB .22 LR upper, 16", Panzer Arms AR57 ULT Complete AR-15 Upper Receiver - 5.7x28mm - 12", Panzer Arms AR57 Ultra Light Tactical Complete AR-15 Upper Receiver - 5.7x28mm - 16"
- Handguards
- Aero Precision AR15 10.3" R-ONE M-LOK handguard (fit unchecked), Aero Precision AR15 12.7" R-ONE M-LOK handguard (fit unchecked), Aero Precision AR15 15" Enhanced M-LOK Handguard, Gen 2 (fit unchecked), Aero Precision AR15 15" R-ONE M-LOK handguard (fit unchecked), Aero Precision AR15 15" S-ONE M-LOK Handguard (fit unchecked), Aero Precision AR15 16.6" R-ONE M-LOK handguard (fit unchecked), Aero Precision AR15 7.3" R-ONE M-LOK handguard (fit unchecked), Aero Precision AR15 9.3" R-ONE M-LOK handguard (fit unchecked), BCM MCMR-10 (M-LOK® Compatible* Modular Rail) (fit unchecked), BCM MCMR-13 (M-LOK® Compatible* Modular Rail) (fit unchecked), BCM MCMR-15 (M-LOK® Compatible* Modular Rail) (fit unchecked), BCM PMCR (Polymer M-LOK® Compatible Rail)* Carbine Length-BLACK (fit unchecked), BCM PMCR (Polymer M-LOK® Compatible Rail)* Mid Length-BLACK (fit unchecked), Expo Arms Free Float AR-15 Handguard - M-LOK - 15" (fit unchecked), Geissele Automatics 10.5" Super Modular Rail MK16 M-LOK (fit unchecked), Geissele Automatics 13.5" Super Modular Rail MK16 M-LOK (fit unchecked), Geissele Automatics 15" Super Modular Rail MK16 M-LOK (fit unchecked), Magpul MOE SL® Hand Guard, Carbine-Length – AR15/M4 (fit unchecked), Magpul MOE SL® Hand Guard, Mid-Length – AR15/M4 (fit unchecked), Magpul MOE® M-LOK® Hand Guard, Carbine-Length – AR15/M4 (fit unchecked), Magpul MOE® M-LOK® Hand Guard, Mid-Length – AR15/M4 (fit unchecked), MAS Defense 12.62" NERO M-LOK FREE FLOAT (fit unchecked), MAS Defense 15" NERO M-LOK FREE FLOAT (fit unchecked), MAS Defense 9.87" NERO M-LOK FREE FLOAT (fit unchecked), Midwest Industries AR-15/M16 Two Piece Drop-In Handguard, M-LOK® (Carbine) (fit unchecked), Midwest Industries AR-15/M16 Two Piece Drop-In Handguard, M-LOK® (Mid-Length) (fit unchecked), Midwest Industries Combat Rail One Piece Free Float Handguard, M-LOK™ (15") (fit unchecked)
- Adapter plates
- Magpul M-LOK Hand Stop MOE Adapter (fit unchecked)