Handguard
Midwest Industries AR-15/M16 Two Piece Drop-In Handguard, M-LOK® (Mid-Length)
Midwest Industries' two-piece aluminium drop-in handguard, mid-length (MI-18M; one page, SKU AR15M16TWOPI, for the carbine, mid and rifle lengths). The maker: "Drop-in, no gunsmith installation, installs in minutes like factory handguards!", "Five anti rotation QD socket locations for QD sling swivels", "Monolithic type continuous top rail", "MIL-STD 1913 top rail", "Constructed from 6061 aluminum hard coat anodized", "1.83\" wide and 2.25\" tall", and "MI-18M (Mid-Length) – Only for use with triangle handguard caps". It goes on the rifle's own barrel nut and delta ring and the cap behind its front sight base: no free-float nut of its own. M-LOK® is a trademark of Magpul Industries Corp.

- Weight
- 6.6 oz ± 0.05 oz Confirmedpublished: Midwest Industries, AR-15/M16 Two Piece Drop-In Handguard, M-LOK® (SKU AR15M16TWOPI; Length: Mid-Length, MI-18M), Product Details, the maker, read Oct 28, 2026
- Lowest price
- $146.95 at AR15Discounts, read Nov 21, 2026 (Black)
- Maker's number
- MI-18M
- Colour
- Black (placeholder)
- Drawn as
- modelled
- Maker's page
- midwestindustriesinc.com
In “Aero 5.56 carbine”, a build on the start page, in place of its Aero Precision AR15 15" R-ONE M-LOK handguard. The BCM G.I. Barrel Nut - AR15 and the BCM Delta Ring Assembly - AR15 and the BCM Front Sight Base F - FSB (ID .750) - Milspec for Flat Top Uppers and the BCM Handguard Cap Triangle - .750 AR15 go in with it: its maker says it needs them.
Its figures
Every figure the site draws and checks it by, with where it came from. Open one for each source's reading, and why one is used where they differ.
Length (the maker's overall length; read here as the rail's whole length, its tongue's rear end to its front)9.04 in ± 0.06 in 229.6 mmConflictPhoto: the maker's gallery picture MI-18M-BLK-2: the mid-length alone, from behind its right side and above, muzzle to the right, 1200 x 457
Published “Overall Length [...] MI-18M - 8.5"”
Midwest Industries, AR-15/M16 Two Piece Drop-In Handguard, M-LOK® (SKU AR15M16TWOPI; Length: Mid-Length, MI-18M), Product Details, the maker, read Oct 28, 2026 the page, harvested Oct 28, 2026
Photo 9.04 in ± 0.06 in used
the maker's gallery picture MI-18M-BLK-2: the mid-length alone, from behind its right side and above, muzzle to the right, 1200 x 457, harvested
Scale: a pinhole camera fitted to the rail's 19 slots (std.picatinny.slot_pitch, on the far edge of the top flat) and the right side's four M-LOK slots (std.mlok.slot_length, slot_width, slot_pitch, the face at half the maker's width): rms 1.0 px, max 3.6 px, f 2754 px, the lens 19.5 in away. Read by the tongue's rear end (0.996 behind slot 0: tongue_rear_from_slot0) to the rail's and the upper half's front (8.044 ahead: front_from_slot0)
Read against the room it is held in, the fit bears out both, as two spans: the maker's 8.5 is its mounting length (the room between the delta ring's lip and the triangle cap's pocket is 8.44 on the catalog's mid-length barrel: mounting_length), and the photo's 9.04 is the rail's whole length from its tongue, which reaches back over the delta ring to the receiver's face. Its carbine length's page figure, 7 in, is the other span (its rail's whole length, 7.09 by its own photo; its room is 6.50), so the page doesn't give one span for both; this one is the rail's.
maker and photo differ by 0.54 in beyond what each states it is good to.
Its mounting length: from its rear flanges' end (on the delta ring's lip) to the end of what goes into the cap (at the inside of the cap's face)8.441 in ± 0.02 in 214.4 mmProvisionalWorked out: An assumption for the drawing, not a reading: the room the catalog's mid-length rifle holds it in: from the delta ring's lip (std.ar15.slip_ring_front_x, 0.336 ahead of the receiver's face) to the triangle cap's pocket, the inside of its face (bcm-handguard-cap-triangle-750, its collar and sheet behind its seat), with the cap on BCM's F base on bcm-16-mid-barrel (the base's rear face 8.865 ahead of the receiver's face): 8.441. To a round cap's pocket it would be 8.492.
Worked out 8.441 in ± 0.02 in used
An assumption for the drawing, not a reading: the room the catalog's mid-length rifle holds it in: from the delta ring's lip (std.ar15.slip_ring_front_x, 0.336 ahead of the receiver's face) to the triangle cap's pocket, the inside of its face (bcm-handguard-cap-triangle-750, its collar and sheet behind its seat), with the cap on BCM's F base on bcm-16-mid-barrel (the base's rear face 8.865 ahead of the receiver's face): 8.441. To a round cap's pocket it would be 8.492., harvested
Published “Overall Length [...] MI-18M - 8.5"”
Midwest Industries, AR-15/M16 Two Piece Drop-In Handguard, M-LOK® (SKU AR15M16TWOPI; Length: Mid-Length, MI-18M), Product Details, the maker, read Oct 28, 2026 the page, harvested Oct 28, 2026
The page's "Overall Length", read as this span: the one a rifle holds it in agrees within 0.06, and the rail's whole length (length) is 9.04.
A part held between two faces is as long as the room it is held in (CLAUDE.md, the P90 magazine): the cap seats it there (D97, ar15.handguard_front). The maker's 8.5 is the same span within its half digit and what the delta ring's spring takes up (0.06).
Not seen in the photo: what of its front goes into the cap is inside its front end. It is where the cap seats it (cap_seat), and where the front sight base's rear then stands in its frame (base_rear_x).
The front sight base's rear face (the cap's seat), in its frame, with the cap seating it: its mounting length and the cap's face ahead of its rear end8.86 in ± 0.03 in 225 mmProvisionalWorked out: {.rear_x} + {.mounting_length} + {bcm-handguard-cap-triangle-750.collar} + {bcm-handguard-cap-triangle-750.sheet}
Worked out 8.86 in ± 0.03 in used
{.rear_x} + {.mounting_length} + {bcm-handguard-cap-triangle-750.collar} + {bcm-handguard-cap-triangle-750.sheet}, harvested
What of its hidden front stands in the base's space ahead of this face is cut from its inside (pipeline/blender/midwest_industries_drop_in_mlok_mid.py): the base is sourced, its inside isn't.
Its whole length, from its rear flanges' end (in the delta ring) to the lower half's front edge8.69 in ± 0.07 in 220.7 mmProvisionalPhoto: the maker's gallery picture MI-18M-BLK-2: the mid-length alone, from behind its right side and above, muzzle to the right, 1200 x 457
Photo 8.69 in ± 0.07 in used
the maker's gallery picture MI-18M-BLK-2: the mid-length alone, from behind its right side and above, muzzle to the right, 1200 x 457, harvested
Scale: a pinhole camera fitted to the rail's 19 slots (std.picatinny.slot_pitch, on the far edge of the top flat) and the right side's four M-LOK slots (std.mlok.slot_length, slot_width, slot_pitch, the face at half the maker's width): rms 1.0 px, max 3.6 px, f 2754 px, the lens 19.5 in away. Read by the rear flanges' rim at 1.0 behind the rail's slot 0 (rail_slot0_from_rear) to the lower half's front edge at 7.69 (lower_front_from_slot0)
Longer than the room between the delta ring's lip and the triangle cap's floor on a mid-length barrel (8.45 in the catalog's build: std.ar15.slip_ring_front_x and the cap's own figures): its front end stands over the cap and 0.17 in over the front sight base's rear, as Magpul's MOE's wraps it (its 9.2 in overall against 8.6 mounting).
Width (across the lower half's side faces)1.83 in ± 0.005 in 46.5 mmConfirmedPublished: Midwest Industries, AR-15/M16 Two Piece Drop-In Handguard, M-LOK® (SKU AR15M16TWOPI; Length: Mid-Length, MI-18M), Product Details, the maker, read Oct 28, 2026
Published “1.83" wide and 2.25" tall” used
Midwest Industries, AR-15/M16 Two Piece Drop-In Handguard, M-LOK® (SKU AR15M16TWOPI; Length: Mid-Length, MI-18M), Product Details, the maker, read Oct 28, 2026 the page, harvested Oct 28, 2026
Taken as across the lower half's flat side faces, the widest in the photo (the camera's plane for the M-LOK slots).
Height (the rail's top to the bottom)2.25 in ± 0.005 in 57.1 mmConfirmedPublished: Midwest Industries, AR-15/M16 Two Piece Drop-In Handguard, M-LOK® (SKU AR15M16TWOPI; Length: Mid-Length, MI-18M), Product Details, the maker, read Oct 28, 2026
Published “1.83" wide and 2.25" tall” used
Midwest Industries, AR-15/M16 Two Piece Drop-In Handguard, M-LOK® (SKU AR15M16TWOPI; Length: Mid-Length, MI-18M), Product Details, the maker, read Oct 28, 2026 the page, harvested Oct 28, 2026
Photo 2.27 in ± 0.03 in
the maker's gallery picture MI-18M-BLK-2: the mid-length alone, from behind its right side and above, muzzle to the right, 1200 x 457, harvested
Scale: a pinhole camera fitted to the rail's 19 slots (std.picatinny.slot_pitch, on the far edge of the top flat) and the right side's four M-LOK slots (std.mlok.slot_length, slot_width, slot_pitch, the face at half the maker's width): rms 1.0 px, max 3.6 px, f 2754 px, the lens 19.5 in away. Read by the bottom's silhouette at column 735 (row 352) carried back onto the lower bevel's plane and onto z = 0.415: 2.285 and 2.274 below the rail's top
The maker's figure; the camera, which wasn't fitted to any height but the M-LOK slots' 7 mm, reads 0.02 more.
Inside diameterNo value yetMissingNo source yet
Not published, and no view on file looks into either end square on. Left missing: the model's inside is its wall (assumed) inside its section.
Its rear end (the rear flanges' end, bearing on the delta ring's lip) ahead of the receiver's front face0.336 in ± 0.015 in 8.5 mmProvisionalWorked out: {std.ar15.slip_ring_front_x}
Worked out 0.336 in ± 0.015 in used
{std.ar15.slip_ring_front_x}, harvested
Where the standard's delta ring holds it: its rear flanges in the ring's skirt, against the lip (std.ar15.slip_ring_front_x, from the Army's drawings). Its instructions: "Pull the delta ring to the rear and remove both sections of the plastic handguards, pulling out from the delta ring end first."
Its rail's top above the bore axis1.212 in ± 0.02 in 30.8 mmCorroboratedWorked out: {bcm-m4-upper.rail_top_above_pin} - {bcm-m4-upper.bore_axis_above_pin}
Worked out 1.2125 in ± 0.02 in used
{bcm-m4-upper.rail_top_above_pin} - {bcm-m4-upper.bore_axis_above_pin}, harvested
Level with a mil-spec receiver's rail: the maker's "Monolithic type continuous top rail". So the catalog's BCM M4 upper's rail top above its pin line less its bore's height above it; the camera reads the bottom 2.27 below the rail's top, which with this puts the bore 1.06 above the bottom (1.0375 by the maker's height).
Slots in its top rail20ProvisionalPhoto: the maker's gallery picture MI-18M-BLK-2: the mid-length alone, from behind its right side and above, muzzle to the right, 1200 x 457
Photo 20 count used
the maker's gallery picture MI-18M-BLK-2: the mid-length alone, from behind its right side and above, muzzle to the right, 1200 x 457, harvested
Scale: none: a count. Read by the top silhouette's dips under the lands' envelope (dips.py): 19, centres from px 203.9 to 1037.8, each 40.5 to 52.9 px from the next, falling smoothly with the distance (a projective map through them leaves 0.38 px rms), none missing; and a twentieth behind them, between the tongue's front (px 130) and the first land (px 163), 0.42 behind the first by that map (one pitch is 0.394) and 0.6 of a pitch across as a slot is (0.52): the tongue is a long land. The carbine's photo has that slot among its own run of fifteen, at its pitch
Its rail's rearmost slot (its centre) ahead of its rear end (the rear flanges' end)0.606 in ± 0.06 in 15.4 mmProvisionalPhoto: the maker's gallery picture MI-18M-BLK-2: the mid-length alone, from behind its right side and above, muzzle to the right, 1200 x 457
Photo 0.606 in ± 0.06 in used
the maker's gallery picture MI-18M-BLK-2: the mid-length alone, from behind its right side and above, muzzle to the right, 1200 x 457, harvested
Scale: a pinhole camera fitted to the rail's 19 slots (std.picatinny.slot_pitch, on the far edge of the top flat) and the right side's four M-LOK slots (std.mlok.slot_length, slot_width, slot_pitch, the face at half the maker's width): rms 1.0 px, max 3.6 px, f 2754 px, the lens 19.5 in away. Read by the flanges' rear rim: circles of their radius (collar_od) about the bore axis carried through the camera at 0.85 to 1.45 behind slot 0 over the photo (rim.py, rim_mid.png): the lower flange's outer edge follows the one at 1.04, the upper's the one at 0.95. (A first reading, 1.45, took the lower flange's leftmost point for its near side at 3 o'clock; it is on the far side.)
Its rail's rearmost slot (its centre) ahead of the receiver's front face0.942 in ± 0.075 in 23.9 mmProvisionalWorked out: {.rear_x} + {.rail_slot0_from_rear}
Worked out 0.942 in ± 0.075 in used
{.rear_x} + {.rail_slot0_from_rear}, harvested
The rail's tongue (its plain rear part over the delta ring), its rear end behind the rail's slot 00.996 in ± 0.04 in 25.3 mmProvisionalPhoto: the maker's gallery picture MI-18M-BLK-2: the mid-length alone, from behind its right side and above, muzzle to the right, 1200 x 457
Photo 0.996 in ± 0.04 in used
the maker's gallery picture MI-18M-BLK-2: the mid-length alone, from behind its right side and above, muzzle to the right, 1200 x 457, harvested
Scale: a pinhole camera fitted to the rail's 19 slots (std.picatinny.slot_pitch, on the far edge of the top flat) and the right side's four M-LOK slots (std.mlok.slot_length, slot_width, slot_pitch, the face at half the maker's width): rms 1.0 px, max 3.6 px, f 2754 px, the lens 19.5 in away. Read by the tongue's far rear corner (column 10, row 112) on the top flat's far edge: 1.387 behind slot 0 through the camera, 1.40 by the projective map of the lands alone (fit1d.py)
With its rear flanges in the delta ring (rear_x, rail_slot0_from_rear) this puts the tongue's rear end 0.05 in behind the upper receiver's front face, inside the two readings' ± (0.04 and 0.06): it reaches the receiver, the maker's "continuous top rail". Drawn bearing on the receiver's front face.
The rail's tongue's thickness (a plate under the rail's top)0.12 in ± 0.03 in 3 mmProvisionalWorked out: An assumption for the drawing, not a reading: the photo shows the plate's far rear edge 10 to 13 px tall from 19 in, edge-on from above where it isn't a height that can be read. Its underside stands 0.13 over the delta ring's front land (std.ar15.slip_ring_front_od) under a rail level with the receiver's.
Worked out 0.12 in ± 0.03 in used
An assumption for the drawing, not a reading: the photo shows the plate's far rear edge 10 to 13 px tall from 19 in, edge-on from above where it isn't a height that can be read. Its underside stands 0.13 over the delta ring's front land (std.ar15.slip_ring_front_od) under a rail level with the receiver's., harvested
The upper half's front (the rail's front end) ahead of the rail's slot 08.044 in ± 0.04 in 204.3 mmProvisionalPhoto: the maker's gallery picture MI-18M-BLK-2: the mid-length alone, from behind its right side and above, muzzle to the right, 1200 x 457
Photo 8.044 in ± 0.04 in used
the maker's gallery picture MI-18M-BLK-2: the mid-length alone, from behind its right side and above, muzzle to the right, 1200 x 457, harvested
Scale: a pinhole camera fitted to the rail's 19 slots (std.picatinny.slot_pitch, on the far edge of the top flat) and the right side's four M-LOK slots (std.mlok.slot_length, slot_width, slot_pitch, the face at half the maker's width): rms 1.0 px, max 3.6 px, f 2754 px, the lens 19.5 in away. Read by the upper side face's front edge carried back onto its plane: 7.58 at the holes' height, 7.63 and 7.68 lower; the last land's front, by the lands' projective map, 7.646
The upper half's body's rear face behind the rail's slot 00.406 in ± 0.04 in 10.3 mmProvisionalPhoto: the maker's gallery picture MI-18M-BLK-2: the mid-length alone, from behind its right side and above, muzzle to the right, 1200 x 457
Photo 0.406 in ± 0.04 in used
the maker's gallery picture MI-18M-BLK-2: the mid-length alone, from behind its right side and above, muzzle to the right, 1200 x 457, harvested
Scale: a pinhole camera fitted to the rail's 19 slots (std.picatinny.slot_pitch, on the far edge of the top flat) and the right side's four M-LOK slots (std.mlok.slot_length, slot_width, slot_pitch, the face at half the maker's width): rms 1.0 px, max 3.6 px, f 2754 px, the lens 19.5 in away. Read by the upper side face's rear edge carried back onto its plane (z 0.85): 0.78 at two heights, 0.83 along the holes' row
The lower half's body's rear face behind the rail's slot 00.156 in ± 0.03 in 4 mmProvisionalPhoto: the maker's gallery picture MI-18M-BLK-2: the mid-length alone, from behind its right side and above, muzzle to the right, 1200 x 457
Photo 0.156 in ± 0.03 in used
the maker's gallery picture MI-18M-BLK-2: the mid-length alone, from behind its right side and above, muzzle to the right, 1200 x 457, harvested
Scale: a pinhole camera fitted to the rail's 19 slots (std.picatinny.slot_pitch, on the far edge of the top flat) and the right side's four M-LOK slots (std.mlok.slot_length, slot_width, slot_pitch, the face at half the maker's width): rms 1.0 px, max 3.6 px, f 2754 px, the lens 19.5 in away. Read by the lower side face's rear edge carried back onto its plane at three heights: 0.516, 0.546, 0.567 behind slot 0
The lower half's front edge ahead of the rail's slot 08.084 in ± 0.03 in 205.3 mmProvisionalPhoto: the maker's gallery picture MI-18M-BLK-2: the mid-length alone, from behind its right side and above, muzzle to the right, 1200 x 457
Photo 8.084 in ± 0.03 in used
the maker's gallery picture MI-18M-BLK-2: the mid-length alone, from behind its right side and above, muzzle to the right, 1200 x 457, harvested
Scale: a pinhole camera fitted to the rail's 19 slots (std.picatinny.slot_pitch, on the far edge of the top flat) and the right side's four M-LOK slots (std.mlok.slot_length, slot_width, slot_pitch, the face at half the maker's width): rms 1.0 px, max 3.6 px, f 2754 px, the lens 19.5 in away. Read by the lower side face's front edge carried back onto its plane: 7.75, 7.69, 7.69 from its top to its bottom
Where the bottom flat ends at the front (its front part cut up), ahead of the rail's slot 07.714 in ± 0.04 in 195.9 mmProvisionalPhoto: the maker's gallery picture MI-18M-BLK-2: the mid-length alone, from behind its right side and above, muzzle to the right, 1200 x 457
Photo 7.714 in ± 0.04 in used
the maker's gallery picture MI-18M-BLK-2: the mid-length alone, from behind its right side and above, muzzle to the right, 1200 x 457, harvested
Scale: a pinhole camera fitted to the rail's 19 slots (std.picatinny.slot_pitch, on the far edge of the top flat) and the right side's four M-LOK slots (std.mlok.slot_length, slot_width, slot_pitch, the face at half the maker's width): rms 1.0 px, max 3.6 px, f 2754 px, the lens 19.5 in away. Read by the bottom's step at column 1110 row 292 carried back onto the bottom's plane (y = -2.25) and onto z 0.4: 7.316 and 7.328
How far the bottom's front part is cut up0.12 in ± 0.04 in 3 mmProvisionalWorked out: An assumption for the drawing, not a reading: the step shows 12 to 15 px tall in the photo, edge-on from above, where it isn't a height that can be read.
Worked out 0.12 in ± 0.04 in used
An assumption for the drawing, not a reading: the step shows 12 to 15 px tall in the photo, edge-on from above, where it isn't a height that can be read., harvested
The rail's neck's foot (where the upper half's top, a shelf out to its side faces, meets the neck under the head) below the rail's top0.43 in ± 0.04 in 10.9 mmConflictPhoto: the maker's gallery picture MI-18M-BLK-2: the mid-length alone, from behind its right side and above, muzzle to the right, 1200 x 457
Photo 0.43 in ± 0.04 in used
the maker's gallery picture MI-18M-BLK-2: the mid-length alone, from behind its right side and above, muzzle to the right, 1200 x 457, harvested
Scale: a pinhole camera fitted to the rail's 19 slots (std.picatinny.slot_pitch, on the far edge of the top flat) and the right side's four M-LOK slots (std.mlok.slot_length, slot_width, slot_pitch, the face at half the maker's width): rms 1.0 px, max 3.6 px, f 2754 px, the lens 19.5 in away. Read by the dark line under the engraved face (column 735, rows 111 to 113) carried back onto the neck's plane (z 0.343, the head's lower faces carried on to shoulder_top_below_top): 0.425 to 0.440
Photo 0.344 in ± 0.03 in
the maker's gallery picture MI-18M-BLK-2: the mid-length alone, from behind its right side and above, muzzle to the right, 1200 x 457, harvested
Scale: a pinhole camera fitted to the rail's 19 slots (std.picatinny.slot_pitch, on the far edge of the top flat) and the right side's four M-LOK slots (std.mlok.slot_length, slot_width, slot_pitch, the face at half the maker's width): rms 1.0 px, max 3.6 px, f 2754 px, the lens 19.5 in away. Read by the same line carried back onto the upper side face's plane (z 0.85) instead
One line of the photo, read on two planes; which one it lies in the photo can't say. Read on the side face's plane (the first reading, a sloped shoulder from the neck out to the side faces under it), the body stood 0.18 to 0.19 in under the rail's top beside the head, and 17 of the 30 clamps on file stood in it (Aimpoint's T-2 LRP 0.06 cubic inches, its PRO and Duty RDS, EOTECH's STS, SIG's Romeo5, Holosun's ARO and HS510C, Magpul's MBUS 3: rail-clamps.test.ts); on the maker's \"MIL-STD 1913 top rail\" they go. Read on the neck's plane, the engraved face is the neck's side, as the maker engraves its name under the rail on its Combat Rail's neck (0.69 in wide down to 0.56 under its top: midwest-combat-rail-15-handguard), and a forged upper's neck runs as deep (0.39); at column 747 the shelf's outer edge projects 10 px under that line, where the photo's grey runs on unbroken to the holes' tops 0.45 down (no edge to read). Drawn so: a neck down to here, the shelf out to the side faces.
neck and side differ by 0.086 in beyond what each states it is good to.
The neck's top: where the head's lower faces, carried on at 45 degrees, meet the neck's sides, below the rail's top0.204 in ± 0.04 in 5.2 mmProvisionalPhoto: the maker's gallery picture MI-18M-BLK-2: the mid-length alone, from behind its right side and above, muzzle to the right, 1200 x 457
Photo 0.204 in ± 0.04 in used
the maker's gallery picture MI-18M-BLK-2: the mid-length alone, from behind its right side and above, muzzle to the right, 1200 x 457, harvested
Scale: a pinhole camera fitted to the rail's 19 slots (std.picatinny.slot_pitch, on the far edge of the top flat) and the right side's four M-LOK slots (std.mlok.slot_length, slot_width, slot_pitch, the face at half the maker's width): rms 1.0 px, max 3.6 px, f 2754 px, the lens 19.5 in away. Read by the top of the dark band under the lands (column 735, row 82: the head's lower faces and the neck's top in their shadow) carried back onto the neck's plane (z 0.343): 0.204. (First read as the top of a shoulder sloping out from the head, on a plane at z 0.6; with the engraved face taken for the neck's side, it is this.)
With the standard's head (lib.rail_half) this sets the neck's half width: the head's lower faces carried on to here.
Width across the upper half's side faces1.7 in ± 0.05 in 43.2 mmProvisionalWorked out: An assumption for the drawing, not a reading: the photo shows the lower half's top as a ledge outside the upper half's side; how far isn't read from a view from above. Every reading on the upper side face is carried back onto this plane.
Worked out 1.7 in ± 0.05 in used
An assumption for the drawing, not a reading: the photo shows the lower half's top as a ledge outside the upper half's side; how far isn't read from a view from above. Every reading on the upper side face is carried back onto this plane., harvested
The gas tube's channel up inside the neck: its roof below the rail's top0.15 in ± 0.03 in 3.8 mmProvisionalWorked out: An assumption for the drawing, not a reading: no view looks into either end. The neck stands over the gas tube (std.ar15.gas_tube_above_bore), so it is hollow up to a web under the rail's slots' floors (std.picatinny.slot_depth, 0.118), as thick as a few hundredths.
Worked out 0.15 in ± 0.03 in used
An assumption for the drawing, not a reading: no view looks into either end. The neck stands over the gas tube (std.ar15.gas_tube_above_bore), so it is hollow up to a web under the rail's slots' floors (std.picatinny.slot_depth, 0.118), as thick as a few hundredths., harvested
The upper side face's lower edge (the seam between the halves) below the rail's top0.978 in ± 0.03 in 24.8 mmProvisionalPhoto: the maker's gallery picture MI-18M-BLK-2: the mid-length alone, from behind its right side and above, muzzle to the right, 1200 x 457
Photo 0.978 in ± 0.03 in used
the maker's gallery picture MI-18M-BLK-2: the mid-length alone, from behind its right side and above, muzzle to the right, 1200 x 457, harvested
Scale: a pinhole camera fitted to the rail's 19 slots (std.picatinny.slot_pitch, on the far edge of the top flat) and the right side's four M-LOK slots (std.mlok.slot_length, slot_width, slot_pitch, the face at half the maker's width): rms 1.0 px, max 3.6 px, f 2754 px, the lens 19.5 in away. Read by the dark seam line at column 735, row 199, carried back onto the upper side face's plane
The lower side face's top edge below the rail's top1.067 in ± 0.03 in 27.1 mmProvisionalPhoto: the maker's gallery picture MI-18M-BLK-2: the mid-length alone, from behind its right side and above, muzzle to the right, 1200 x 457
Photo 1.067 in ± 0.03 in used
the maker's gallery picture MI-18M-BLK-2: the mid-length alone, from behind its right side and above, muzzle to the right, 1200 x 457, harvested
Scale: a pinhole camera fitted to the rail's 19 slots (std.picatinny.slot_pitch, on the far edge of the top flat) and the right side's four M-LOK slots (std.mlok.slot_length, slot_width, slot_pitch, the face at half the maker's width): rms 1.0 px, max 3.6 px, f 2754 px, the lens 19.5 in away. Read by column 735, row 213, carried back onto the lower side face's plane
The lower side face's bottom edge (where the lower bevel begins) below the rail's top1.542 in ± 0.03 in 39.2 mmProvisionalPhoto: the maker's gallery picture MI-18M-BLK-2: the mid-length alone, from behind its right side and above, muzzle to the right, 1200 x 457
Photo 1.542 in ± 0.03 in used
the maker's gallery picture MI-18M-BLK-2: the mid-length alone, from behind its right side and above, muzzle to the right, 1200 x 457, harvested
Scale: a pinhole camera fitted to the rail's 19 slots (std.picatinny.slot_pitch, on the far edge of the top flat) and the right side's four M-LOK slots (std.mlok.slot_length, slot_width, slot_pitch, the face at half the maker's width): rms 1.0 px, max 3.6 px, f 2754 px, the lens 19.5 in away. Read by column 735, row 276, carried back onto the lower side face's plane
Half the bottom flat's width0.4 in ± 0.05 in 10.2 mmProvisionalPhoto: the maker's gallery picture MI-18M-BLK-2: the mid-length alone, from behind its right side and above, muzzle to the right, 1200 x 457
Photo 0.4 in ± 0.05 in used
the maker's gallery picture MI-18M-BLK-2: the mid-length alone, from behind its right side and above, muzzle to the right, 1200 x 457, harvested
Scale: a pinhole camera fitted to the rail's 19 slots (std.picatinny.slot_pitch, on the far edge of the top flat) and the right side's four M-LOK slots (std.mlok.slot_length, slot_width, slot_pitch, the face at half the maker's width): rms 1.0 px, max 3.6 px, f 2754 px, the lens 19.5 in away. Read by the bottom's silhouette (column 735, row 352) carried back onto the lower bevel's plane through the side face's lower edge: z 0.38 at 2.285 below the top; 0.415 where it meets the maker's height
The seam's groove (each side), its width and depth0.02 in ± 0.01 in 0.5 mmProvisionalWorked out: An assumption for the drawing, not a reading: the seam shows as a dark line a few pixels wide.
Worked out 0.02 in ± 0.01 in used
An assumption for the drawing, not a reading: the seam shows as a dark line a few pixels wide., harvested
Its wall's thickness0.08 in ± 0.03 in 2 mmProvisionalWorked out: An assumption for the drawing, not a reading: no view looks into an end square on. Set so that the model's aluminium is near the maker's installed weight at the density on file (std.density.aluminium).
Worked out 0.08 in ± 0.03 in used
An assumption for the drawing, not a reading: no view looks into an end square on. Set so that the model's aluminium is near the maker's installed weight at the density on file (std.density.aluminium)., harvested
The upper half's front top corner, rounded (its radius)0.25 in ± 0.1 in 6.3 mmProvisionalWorked out: An assumption for the drawing, not a reading: the photo shows the upper half's front rounding over from its side into the rail's front, seen from behind.
Worked out 0.25 in ± 0.1 in used
An assumption for the drawing, not a reading: the photo shows the upper half's front rounding over from its side into the rail's front, seen from behind., harvested
The rear flanges' outside diameter1.74 in ± 0.01 in 44.2 mmProvisionalWorked out: An assumption for the drawing, not a reading: inside the delta ring's skirt (std.ar15.slip_ring_skirt_d, 1.750), where they go.
Worked out 1.74 in ± 0.01 in used
An assumption for the drawing, not a reading: inside the delta ring's skirt (std.ar15.slip_ring_skirt_d, 1.750), where they go., harvested
The rear flanges' inside diameter1.6 in ± 0.03 in 40.6 mmProvisionalWorked out: An assumption for the drawing, not a reading: clear of the barrel nut's toothed flange (std.ar15.barrel_nut_flange_od, 1.56) that the skirt surrounds.
Worked out 1.6 in ± 0.03 in used
An assumption for the drawing, not a reading: clear of the barrel nut's toothed flange (std.ar15.barrel_nut_flange_od, 1.56) that the skirt surrounds., harvested
The pitch of the round holes along the upper side faces and along the lower bevels0.731 in ± 0.01 in 18.6 mmProvisionalPhoto: the maker's gallery picture MI-18M-BLK-2: the mid-length alone, from behind its right side and above, muzzle to the right, 1200 x 457
Photo 0.731 in ± 0.01 in used
the maker's gallery picture MI-18M-BLK-2: the mid-length alone, from behind its right side and above, muzzle to the right, 1200 x 457, harvested
Scale: a pinhole camera fitted to the rail's 19 slots (std.picatinny.slot_pitch, on the far edge of the top flat) and the right side's four M-LOK slots (std.mlok.slot_length, slot_width, slot_pitch, the face at half the maker's width): rms 1.0 px, max 3.6 px, f 2754 px, the lens 19.5 in away. Read by the lower bevel's ten holes run along their row through the camera (along.py at 1.896 below the top): edges every 0.725 to 0.735 in, centres 0.765 to 5.880 over seven pitches; the upper side's nine regular holes agree, 0.725 over eight
The round holes along each upper side face (regular ones; the large one at the front apart)9ProvisionalPhoto: the maker's gallery picture MI-18M-BLK-2: the mid-length alone, from behind its right side and above, muzzle to the right, 1200 x 457
Photo 9 count used
the maker's gallery picture MI-18M-BLK-2: the mid-length alone, from behind its right side and above, muzzle to the right, 1200 x 457, harvested
Scale: none: a count. Read by counted on the right side: nine of one size, and a tenth, larger, at the front
The upper side face's first round hole (its centre) ahead of the rail's slot 00.502 in ± 0.03 in 12.8 mmProvisionalPhoto: the maker's gallery picture MI-18M-BLK-2: the mid-length alone, from behind its right side and above, muzzle to the right, 1200 x 457
Photo 0.502 in ± 0.03 in used
the maker's gallery picture MI-18M-BLK-2: the mid-length alone, from behind its right side and above, muzzle to the right, 1200 x 457, harvested
Scale: a pinhole camera fitted to the rail's 19 slots (std.picatinny.slot_pitch, on the far edge of the top flat) and the right side's four M-LOK slots (std.mlok.slot_length, slot_width, slot_pitch, the face at half the maker's width): rms 1.0 px, max 3.6 px, f 2754 px, the lens 19.5 in away. Read by the nine holes' runs along their row (0.70 below the top) on the upper face's plane: centres 0.135, 0.84, 1.60, 2.30, 3.04, 3.75, 4.49, 5.20, 5.935; less the pitch times each one's place, 0.083 to 0.138, mean 0.108
The upper side face's round holes, their diameter0.59 in ± 0.03 in 15 mmProvisionalPhoto: the maker's gallery picture MI-18M-BLK-2: the mid-length alone, from behind its right side and above, muzzle to the right, 1200 x 457
Photo 0.59 in ± 0.03 in used
the maker's gallery picture MI-18M-BLK-2: the mid-length alone, from behind its right side and above, muzzle to the right, 1200 x 457, harvested
Scale: a pinhole camera fitted to the rail's 19 slots (std.picatinny.slot_pitch, on the far edge of the top flat) and the right side's four M-LOK slots (std.mlok.slot_length, slot_width, slot_pitch, the face at half the maker's width): rms 1.0 px, max 3.6 px, f 2754 px, the lens 19.5 in away. Read by each run's length along the row: 0.55 to 0.61, mean 0.59; up and down the one at 3.73, 0.53 (its lower rim at the seam's edge)
The upper side face's round holes' centres below the rail's top0.7 in ± 0.04 in 17.8 mmProvisionalPhoto: the maker's gallery picture MI-18M-BLK-2: the mid-length alone, from behind its right side and above, muzzle to the right, 1200 x 457
Photo 0.7 in ± 0.04 in used
the maker's gallery picture MI-18M-BLK-2: the mid-length alone, from behind its right side and above, muzzle to the right, 1200 x 457, harvested
Scale: a pinhole camera fitted to the rail's 19 slots (std.picatinny.slot_pitch, on the far edge of the top flat) and the right side's four M-LOK slots (std.mlok.slot_length, slot_width, slot_pitch, the face at half the maker's width): rms 1.0 px, max 3.6 px, f 2754 px, the lens 19.5 in away. Read by the hole at 3.73: its rims 0.449 and 0.980 below the top; the row's centres read 0.65 at the rear and 0.76 at the front
The large hole at the front of each upper side face, its centre ahead of the rail's slot 07.144 in ± 0.04 in 181.5 mmProvisionalPhoto: the maker's gallery picture MI-18M-BLK-2: the mid-length alone, from behind its right side and above, muzzle to the right, 1200 x 457
Photo 7.144 in ± 0.04 in used
the maker's gallery picture MI-18M-BLK-2: the mid-length alone, from behind its right side and above, muzzle to the right, 1200 x 457, harvested
Scale: a pinhole camera fitted to the rail's 19 slots (std.picatinny.slot_pitch, on the far edge of the top flat) and the right side's four M-LOK slots (std.mlok.slot_length, slot_width, slot_pitch, the face at half the maker's width): rms 1.0 px, max 3.6 px, f 2754 px, the lens 19.5 in away. Read by its rims carried back onto the upper face's plane: 6.33 and 7.17 fore and aft
The large front hole's length along the handguard0.84 in ± 0.04 in 21.3 mmProvisionalPhoto: the maker's gallery picture MI-18M-BLK-2: the mid-length alone, from behind its right side and above, muzzle to the right, 1200 x 457
Photo 0.84 in ± 0.04 in used
the maker's gallery picture MI-18M-BLK-2: the mid-length alone, from behind its right side and above, muzzle to the right, 1200 x 457, harvested
Scale: a pinhole camera fitted to the rail's 19 slots (std.picatinny.slot_pitch, on the far edge of the top flat) and the right side's four M-LOK slots (std.mlok.slot_length, slot_width, slot_pitch, the face at half the maker's width): rms 1.0 px, max 3.6 px, f 2754 px, the lens 19.5 in away. Read by its rims 6.327 and 7.165 from slot 0
The large front hole's height0.56 in ± 0.04 in 14.2 mmProvisionalPhoto: the maker's gallery picture MI-18M-BLK-2: the mid-length alone, from behind its right side and above, muzzle to the right, 1200 x 457
Photo 0.56 in ± 0.04 in used
the maker's gallery picture MI-18M-BLK-2: the mid-length alone, from behind its right side and above, muzzle to the right, 1200 x 457, harvested
Scale: a pinhole camera fitted to the rail's 19 slots (std.picatinny.slot_pitch, on the far edge of the top flat) and the right side's four M-LOK slots (std.mlok.slot_length, slot_width, slot_pitch, the face at half the maker's width): rms 1.0 px, max 3.6 px, f 2754 px, the lens 19.5 in away. Read by its rims 0.423 and 0.982 below the top
The large front hole's centre below the rail's top0.7 in ± 0.04 in 17.8 mmProvisionalPhoto: the maker's gallery picture MI-18M-BLK-2: the mid-length alone, from behind its right side and above, muzzle to the right, 1200 x 457
Photo 0.7 in ± 0.04 in used
the maker's gallery picture MI-18M-BLK-2: the mid-length alone, from behind its right side and above, muzzle to the right, 1200 x 457, harvested
Scale: a pinhole camera fitted to the rail's 19 slots (std.picatinny.slot_pitch, on the far edge of the top flat) and the right side's four M-LOK slots (std.mlok.slot_length, slot_width, slot_pitch, the face at half the maker's width): rms 1.0 px, max 3.6 px, f 2754 px, the lens 19.5 in away. Read by the middle of its rims, 0.423 and 0.982 below the top
The round holes along each lower bevel10ProvisionalPhoto: the maker's gallery picture MI-18M-BLK-2: the mid-length alone, from behind its right side and above, muzzle to the right, 1200 x 457
Photo 10 count used
the maker's gallery picture MI-18M-BLK-2: the mid-length alone, from behind its right side and above, muzzle to the right, 1200 x 457, harvested
Scale: none: a count. Read by ten runs along the right lower bevel's middle through the camera, the first partly behind the rear QD socket's boss
The lower bevel's first round hole (its centre) ahead of the rail's slot 00.428 in ± 0.02 in 10.9 mmProvisionalPhoto: the maker's gallery picture MI-18M-BLK-2: the mid-length alone, from behind its right side and above, muzzle to the right, 1200 x 457
Photo 0.428 in ± 0.02 in used
the maker's gallery picture MI-18M-BLK-2: the mid-length alone, from behind its right side and above, muzzle to the right, 1200 x 457, harvested
Scale: a pinhole camera fitted to the rail's 19 slots (std.picatinny.slot_pitch, on the far edge of the top flat) and the right side's four M-LOK slots (std.mlok.slot_length, slot_width, slot_pitch, the face at half the maker's width): rms 1.0 px, max 3.6 px, f 2754 px, the lens 19.5 in away. Read by the second hole's centre (0.765) less a pitch; the first's own run, partly hidden, ends at 0.335 = 0.035 + 0.30
The lower bevel's round holes, their diameter0.6 in ± 0.02 in 15.2 mmProvisionalPhoto: the maker's gallery picture MI-18M-BLK-2: the mid-length alone, from behind its right side and above, muzzle to the right, 1200 x 457
Photo 0.6 in ± 0.02 in used
the maker's gallery picture MI-18M-BLK-2: the mid-length alone, from behind its right side and above, muzzle to the right, 1200 x 457, harvested
Scale: a pinhole camera fitted to the rail's 19 slots (std.picatinny.slot_pitch, on the far edge of the top flat) and the right side's four M-LOK slots (std.mlok.slot_length, slot_width, slot_pitch, the face at half the maker's width): rms 1.0 px, max 3.6 px, f 2754 px, the lens 19.5 in away. Read by each run along the bevel's middle: 0.590 to 0.605
M-LOK slots in each lower side face4ProvisionalPhoto: the maker's gallery picture MI-18M-BLK-2: the mid-length alone, from behind its right side and above, muzzle to the right, 1200 x 457
Photo 4 count used
the maker's gallery picture MI-18M-BLK-2: the mid-length alone, from behind its right side and above, muzzle to the right, 1200 x 457, harvested
Scale: none: a count. Read by counted on the right side: four, on the 40 mm pitch (the camera's fit)
The lower side face's first M-LOK slot (its centre) ahead of the rail's slot 01.634 in ± 0.03 in 41.5 mmProvisionalPhoto: the maker's gallery picture MI-18M-BLK-2: the mid-length alone, from behind its right side and above, muzzle to the right, 1200 x 457
Photo 1.634 in ± 0.03 in used
the maker's gallery picture MI-18M-BLK-2: the mid-length alone, from behind its right side and above, muzzle to the right, 1200 x 457, harvested
Scale: a pinhole camera fitted to the rail's 19 slots (std.picatinny.slot_pitch, on the far edge of the top flat) and the right side's four M-LOK slots (std.mlok.slot_length, slot_width, slot_pitch, the face at half the maker's width): rms 1.0 px, max 3.6 px, f 2754 px, the lens 19.5 in away. Read by the camera's own fit of the row: 1.227; its runs along the row's middle (along.py): 1.25, then 2.81, 4.385, 5.98
The lower side face's first M-LOK slot (its centre) ahead of the receiver's front face2.576 in ± 0.08 in 65.4 mmProvisionalWorked out: {.rail_slot0_x} + {.mlok_slot0_from_slot0}
Worked out 2.576 in ± 0.08 in used
{.rail_slot0_x} + {.mlok_slot0_from_slot0}, harvested
The M-LOK slots' centre line (and the QD sockets') below the rail's top1.38 in ± 0.03 in 35.1 mmProvisionalPhoto: the maker's gallery picture MI-18M-BLK-2: the mid-length alone, from behind its right side and above, muzzle to the right, 1200 x 457
Photo 1.38 in ± 0.03 in used
the maker's gallery picture MI-18M-BLK-2: the mid-length alone, from behind its right side and above, muzzle to the right, 1200 x 457, harvested
Scale: a pinhole camera fitted to the rail's 19 slots (std.picatinny.slot_pitch, on the far edge of the top flat) and the right side's four M-LOK slots (std.mlok.slot_length, slot_width, slot_pitch, the face at half the maker's width): rms 1.0 px, max 3.6 px, f 2754 px, the lens 19.5 in away. Read by the camera's fit of the row: 1.380; the QD sockets' rims read their centres 1.374 and 1.389 below
The M-LOK faces' distance from the bore axis0.915 in ± 0.003 in 23.2 mmConfirmedWorked out: {.width} / 2
Worked out 0.915 in ± 0.003 in used
{.width} / 2, harvested
The rear QD socket's centre ahead of the rail's slot 0 (on each lower side face)0.394 in ± 0.03 in 10 mmProvisionalPhoto: the maker's gallery picture MI-18M-BLK-2: the mid-length alone, from behind its right side and above, muzzle to the right, 1200 x 457
Photo 0.394 in ± 0.03 in used
the maker's gallery picture MI-18M-BLK-2: the mid-length alone, from behind its right side and above, muzzle to the right, 1200 x 457, harvested
Scale: a pinhole camera fitted to the rail's 19 slots (std.picatinny.slot_pitch, on the far edge of the top flat) and the right side's four M-LOK slots (std.mlok.slot_length, slot_width, slot_pitch, the face at half the maker's width): rms 1.0 px, max 3.6 px, f 2754 px, the lens 19.5 in away. Read by its rim carried back onto the lower face's plane: -0.178 and 0.172 fore and aft, centre -0.004
The front QD socket's centre ahead of the rail's slot 0 (on each lower side face)7.604 in ± 0.03 in 193.1 mmProvisionalPhoto: the maker's gallery picture MI-18M-BLK-2: the mid-length alone, from behind its right side and above, muzzle to the right, 1200 x 457
Photo 7.604 in ± 0.03 in used
the maker's gallery picture MI-18M-BLK-2: the mid-length alone, from behind its right side and above, muzzle to the right, 1200 x 457, harvested
Scale: a pinhole camera fitted to the rail's 19 slots (std.picatinny.slot_pitch, on the far edge of the top flat) and the right side's four M-LOK slots (std.mlok.slot_length, slot_width, slot_pitch, the face at half the maker's width): rms 1.0 px, max 3.6 px, f 2754 px, the lens 19.5 in away. Read by its rim carried back onto the lower face's plane: 7.027 and 7.403 fore and aft, 1.203 and 1.584 below the top
The QD sockets' hole, its diameter0.375 in ± 0.02 in 9.5 mmProvisionalPhoto: the maker's gallery picture MI-18M-BLK-2: the mid-length alone, from behind its right side and above, muzzle to the right, 1200 x 457
Photo 0.375 in ± 0.02 in used
the maker's gallery picture MI-18M-BLK-2: the mid-length alone, from behind its right side and above, muzzle to the right, 1200 x 457, harvested
Scale: a pinhole camera fitted to the rail's 19 slots (std.picatinny.slot_pitch, on the far edge of the top flat) and the right side's four M-LOK slots (std.mlok.slot_length, slot_width, slot_pitch, the face at half the maker's width): rms 1.0 px, max 3.6 px, f 2754 px, the lens 19.5 in away. Read by the two sockets' rims: 0.350 and 0.383 (rear), 0.376 and 0.381 (front), fore and aft and up and down
The room inside its M-LOK faces before the barrel (what an accessory's nuts may take)No value yetMissingNo source yet
Not published. It depends on the barrel under it, another part: left missing, and the check reads as unmade.
What it goes with
By the way it mounts, and the figures each part on file states: a part whose figures say it doesn't fit is left out, and one whose fit can't be checked from what is published is marked. A check is against published figures, not a guarantee.
Drop-in handguard's front in its cap
Handguard mount
Drop-in handguard's hold
- Delta rings
- BCM Delta Ring Assembly - AR15
Gas system length
- Barrels
- Aero Precision 16" 5.56 CMV barrel, mid-length, BCM Standard 14.5" Mid Length Barrel, Stripped, BCM Standard 16" Mid Length Barrel, Stripped, Bear Creek Arsenal BC-15 5.56 NATO, 16" Parkerized M4 Barrel, 1:7 Twist, Mid-Length Gas System, Faxon Firearms Duty Series Pencil Profile 16" Mid-Length 5.56 NATO AR15 Barrel, Geissele Automatics CHF Chrome Lined Barrel - 5.56 - 13.9", Geissele Automatics CHF Chrome Lined Barrel - 5.56 - 14.5", Geissele Automatics CHF Chrome Lined Barrel - 5.56 - 16"
Picatinny rail (MIL-STD-1913)
- Red dot mounts
- Aimpoint Duty RDS One-piece TNP Mount, 30 mm, Aimpoint LRP (Lever Release Picatinny) Mount with 39 mm Spacer, for Micro, Aimpoint One-piece Torsion Nut Mount and Spacer, 39 mm, Geissele Super Precision T1 Mount - 1.93" Height, Geissele Super Precision T1 Mount - Absolute Co-Witness, Geissele Super Precision T1 Mount - Lower 1/3 Co-Witness, Holosun 1.63 in lower 1/3 co-witness pedestal mount (HS-MOUNT-AR-RISER-ARO), Midwest Industries MK2 QD T2 Aimpoint Mount, Low, Midwest Industries MK2 QD T2 Aimpoint Mount, Lower 1/3 Cowitness, Midwest Industries MK2 QD T2 Aimpoint Mount, NV 2.26 in Height, Reptilia DOT MOUNT FOR AIMPOINT® MICRO – 1.93″ HEIGHT, Reptilia DOT MOUNT FOR AIMPOINT® MICRO – LOWER 1/3 (39MM HEIGHT), Scalarworks LEAP/01 Aimpoint Micro T-2 quick-detach mount, 1.42 in, Scalarworks LEAP/01 Aimpoint Micro T-2 quick-detach mount, 1.57 in, Scalarworks LEAP/01 Aimpoint Micro T-2 quick-detach mount, 1.93 in, Scalarworks LEAP/02 Aimpoint Micro T-2 quick-detach mount, 2.26 in, SIG Sauer M1913 I-BEAM Mount, 1.41 in absolute co-witness, SIG Sauer See-Through Riser Mount, 1.41 in absolute co-witness, Unity Tactical FAST Micro Mount, 2.26 in optical centerline
- Optics
- Aimpoint Patrol Rifle Optic (PRO) Red Dot Reflex Sight - QRP2 Mount, EOTECH HWS EXPS3 holographic weapon sight, 1-Dot Speed Ring, Holosun HS510C Open Reflex MRS Solar QD Mount
- Lights
- Olight Baldr S BL, Streamlight ProTac Rail Mount HL-X, SureFire Mini Scout Light Pro, SureFire Scout Light Pro Dual Fuel
- Backup sights
- Daniel Defense A1.5 Fixed Rear Sight, Daniel Defense Rail Mounted Fixed Front Sight, Magpul MBUS 3 Sight – Front, Magpul MBUS 3 Sight – Rear, Magpul MBUS Pro Sight – Front, Magpul MBUS Pro Sight – Rear
- Magnifiers
- EOTECH G33 Magnifier, STS Mount, EOTECH G45 Magnifier, STS Mount, Holosun HM3X 3× magnifier with flip mount
- Scope mounts
- Primary Arms Deluxe AR-15 Scope Mount - 30mm, Primary Arms SLx Cantilever 30mm Mount - 1.5", Reptilia AUS™ MOUNT - 30MM DIAMETER - 39MM HEIGHT, Scalarworks LEAP/08 quick-detach scope mount, 30 mm, 1.57 in, SIG SAUER ALPHA-MSR scope mount, 30 mm, Vortex Sport Cantilever 30mm Mount
M-LOK
- Hand stops
- BCM KAG (M-LOK® Compatible*) (fit unchecked), Magpul M-LOK Hand Stop (fit unchecked), Magpul M-LOK Index Panel (fit unchecked)
- Vertical grips
- BCM Vertical Grip Mod 3 (M-LOK® Compatible*) (fit unchecked), Magpul M-LOK MVG vertical grip (fit unchecked)
- Lights
- Cloud Defensive REIN (fit unchecked), Streamlight ProTac Rail Mount HL-X (fit unchecked), SureFire Mini Scout Light Pro (fit unchecked), SureFire Scout Light Pro Dual Fuel (fit unchecked)
- Rail sections
- Magpul M-LOK® Aluminum Rail, 3 Slots (fit unchecked), Magpul M-LOK® Aluminum Rail, 5 Slots (fit unchecked), Magpul M-LOK® Aluminum Rail, 7 Slots (fit unchecked), Magpul M-LOK® Aluminum Rail, 9 Slots (fit unchecked), Magpul M-LOK® Polymer Rail, 11 Slots (fit unchecked), Magpul M-LOK® Polymer Rail, 3 Slots (fit unchecked), Magpul M-LOK® Polymer Rail, 5 Slots (fit unchecked), Magpul M-LOK® Polymer Rail, 7 Slots (fit unchecked), Magpul M-LOK® Polymer Rail, 9 Slots (fit unchecked)
- Adapter plates
- Magpul M-LOK Hand Stop MOE Adapter (fit unchecked)
- Sling mounts
- Magpul M-LOK QD Sling Mount (fit unchecked)
- Rail covers
- Magpul M-LOK Rail Cover Type 2 (fit unchecked)
Prices on file
Each seller's latest reading of its own page: before tax and shipping, and not a quote. The pages are read again every night.
- AR15Discounts $146.95 Black Nov 21, 2026, stock not said
- Midwest Gun Works $95.00 Black Nov 21, 2026, out of stock that day