Red dot mount
Aimpoint Duty RDS One-piece TNP Mount, 30 mm
The lower of the two mounts Aimpoint sells the Duty RDS on: "Duty RDS™ One-piece TNP Mount 30 mm", the sight on it 200758, the mount alone 200768 (Aimpoint's label on its box). A Micro-footprint dot screws to its top; the Duty RDS on it has its axis 30 mm (1.18 in) over the rail, "measured from top surface of mounting platform" (Aimpoint's table, as The Shooting Centre prints it): an absolute co-witness height. Its locking bar clamps it by one screw, as the 39 mm mount's. The page linked is The Shooting Centre's, in the UK, for the pair: no seller on file sells either.

- Weight
- 1.13 oz ± 0.035 oz Provisionalworked out: The Shooting Centre's copy of Aimpoint's table for 200758: "Weight 140 g" less "Weight - Sight Only 108 g" (both on the page, read 2026-11-05).
- Lowest price
- No price on file
- Maker's number
- 200768
- Colour
- Black (placeholder)
- Drawn as
- modelled
- Maker's page
- store.theshootingcentre.com
In “22RB .22 LR rifle”, a build on the start page, in place of its Holosun 1.63 in lower 1/3 co-witness pedestal mount (HS-MOUNT-AR-RISER-ARO).
Its figures
Every figure the site draws and checks it by, with where it came from. Open one for each source's reading, and why one is used where they differ.
The deck's top (the seam under the sight's foot, where a dot's base sits) above the rail's top0.152 in ± 0.017 in 3.9 mmProvisionalWorked out: {.axis_above_rail} - {aimpoint-duty-rds.axis_above_base}
Worked out 0.152 in ± 0.017 in used
{.axis_above_rail} - {aimpoint-duty-rds.axis_above_base}, harvested
30 mm (1.181 in) less the Duty RDS's 1.029 in.
Photo 0.127 in ± 0.02 in
Aimpoint's 200758, the Duty RDS on its 30 mm mount, straight left side, as The Shooting Centre shows it (ISS7058-002), 1280 px, harvested
Scale: the sight's own length, its cover rings' span along their middle rows: 1170 px here and 976 px in Aimpoint's left view of the 39 mm pair, whose scale the sight's ledger has (315.0 px/in): 377.6 px/in. Read by the seam under the sight's foot (rows 1075 to 1080) is 8 to 13 px over the locking bar's top (row 1088) here; the 39 mm pair's is 0.404 in over its bar's top (aimpoint-duty-rds.underside_above_clamp_bottom less jaw_top_above_clamp_bottom): 0.379 in less, on the 39 mm mount's deck (0.5064)
Aimpoint's own axis height less the sight's own axis over its base, as every red dot mount's deck is drawn; the reading through the locking bar, 0.025 in lower and inside the two figures' ±, stays beside it.
Aimpoint gives the mount's height only as the Duty RDS's axis on it: "Height of Optical Axis 30 mm (1.2 in) measured from top surface of mounting platform". Less the Duty RDS's own axis over its base it is the deck's height: 0.354 in, 9 mm, under the 39 mm mount's, which is the two axis heights' difference. Read on the 30 mm pair's own left view through the locking bar (the same bar on both mounts), its seam stands 0.38 in under the 39 mm's, and so 0.025 in lower: kept beside it.
The Duty RDS's axis above the rail's top on this mount (Aimpoint's figure for the pair)1.181 in 30 mmProvisionalPublished: The Shooting Centre, Aimpoint Duty RDS 2 MOA with 30 mm One-piece TNP Mount (MPN 200758), Aimpoint's table, a seller, read Nov 5, 2026
Published “Height of Optical Axis 30 mm (1.2 in) measured from top surface of mounting platform” used
The Shooting Centre, Aimpoint Duty RDS 2 MOA with 30 mm One-piece TNP Mount (MPN 200758), Aimpoint's table, a seller, read Nov 5, 2026 the page, harvested Nov 5, 2026
Worked out 1.1811 in
{aimpoint-duty-rds.standard_axis_above_rail}, harvested
The sight's ledger's figure for the standard mount, from Aimpoint's 2025 manual and T.REX ARMS' table.
Aimpoint's table for the pair on this mount, as a seller prints it; the manual's standard mount, in the sight's ledger, is the same 30 mm.
The footprint's middle along the deck, ahead of the clamp's middle0 in ± 0.05 in 0 mmProvisionalWorked out: {aimpoint-duty-rds-39mm-mount.deck_x}
Worked out 0 in ± 0.05 in used
{aimpoint-duty-rds-39mm-mount.deck_x}, harvested
As on the 39 mm mount: no view shows the footprint's screws or lug, and their middle is taken to be the mount's.
The mount's length along the rail2.045 in ± 0.015 in 51.9 mmProvisionalWorked out: {aimpoint-duty-rds.mount_length}
Worked out 2.045 in ± 0.015 in used
{aimpoint-duty-rds.mount_length}, harvested
The 39 mm pair's reading: the 30 mm pair's left view has the same block as long, 773 px at 377.6 px/in (2.047 in).
How far the mount reaches below the rail's top0.4 in ± 0.03 in 10.2 mmProvisionalWorked out: {aimpoint-duty-rds.clamp_below_rail}
Worked out 0.4 in ± 0.03 in used
{aimpoint-duty-rds.clamp_below_rail}, harvested
The same block as the 39 mm mount under its locking bar's top.
What it goes with
By the way it mounts, and the figures each part on file states: a part whose figures say it doesn't fit is left out, and one whose fit can't be checked from what is published is marked. A check is against published figures, not a guarantee.
Picatinny rail (MIL-STD-1913)
- Uppers
- Aero Precision M4E1 Enhanced Upper Receiver Stripped, Aero Precision M4E1 Threaded upper receiver, BCM M4 Upper Receiver Assembly (w/ Laser T-Markings), Expo Arms 7075 Stripped AR-15 Upper Receiver, Geissele Automatics Super Duty Stripped Upper Receiver, Nordic Components 22RB .22 LR upper, 16", Palmetto State Armory AR-15 Stripped Upper Receiver, Panzer Arms AR57 ULT Complete AR-15 Upper Receiver - 5.7x28mm - 12", Panzer Arms AR57 Ultra Light Tactical Complete AR-15 Upper Receiver - 5.7x28mm - 16"
- Handguards
- Aero Precision AR15 10.3" R-ONE M-LOK handguard, Aero Precision AR15 12.7" R-ONE M-LOK handguard, Aero Precision AR15 15" Enhanced M-LOK Handguard, Gen 2, Aero Precision AR15 15" R-ONE M-LOK handguard, Aero Precision AR15 15" S-ONE M-LOK Handguard, Aero Precision AR15 16.6" R-ONE M-LOK handguard, Aero Precision AR15 7.3" R-ONE M-LOK handguard, Aero Precision AR15 9.3" R-ONE M-LOK handguard, BCM MCMR-10 (M-LOK® Compatible* Modular Rail), BCM MCMR-13 (M-LOK® Compatible* Modular Rail), BCM MCMR-15 (M-LOK® Compatible* Modular Rail), Expo Arms Free Float AR-15 Handguard - M-LOK - 15", Geissele Automatics 10.5" Super Modular Rail MK16 M-LOK, Geissele Automatics 13.5" Super Modular Rail MK16 M-LOK, Geissele Automatics 15" Super Modular Rail MK16 M-LOK, MAS Defense 12.62" NERO M-LOK FREE FLOAT, MAS Defense 15" NERO M-LOK FREE FLOAT, MAS Defense 9.87" NERO M-LOK FREE FLOAT, Midwest Industries AR-15/M16 Two Piece Drop-In Handguard, M-LOK® (Carbine), Midwest Industries AR-15/M16 Two Piece Drop-In Handguard, M-LOK® (Mid-Length), Midwest Industries Combat Rail One Piece Free Float Handguard, M-LOK™ (15")
- Frames
- Taurus TX22 Gen 2 frame
- Rail sections
- Magpul M-LOK® Aluminum Rail, 3 Slots, Magpul M-LOK® Aluminum Rail, 5 Slots, Magpul M-LOK® Aluminum Rail, 7 Slots, Magpul M-LOK® Aluminum Rail, 9 Slots, Magpul M-LOK® Polymer Rail, 11 Slots, Magpul M-LOK® Polymer Rail, 3 Slots, Magpul M-LOK® Polymer Rail, 5 Slots, Magpul M-LOK® Polymer Rail, 7 Slots, Magpul M-LOK® Polymer Rail, 9 Slots