Handguard
Aero Precision AR15 15" S-ONE M-LOK Handguard
Aero Precision's 15 in S-ONE free-float M-LOK handguard: "Machined from 6061-T6 aluminum", "Front and rear picatinny rail" with the "Eliminated center of top rail for weight reduction" and "Indexing grooves in 12:00 position for positive grip control" between, a "Quick disconnect sling socket at the 3, 6 and 9 o'clock positions", mounted by its own barrel nut and taper lock ("All hardware mounting parts are included with the purchase of an ATLAS Handguard") on a standard upper's thread. "Compatible with mil-spec AR15 upper receivers and barrels"; "NOT Compatible with M4E1 Enhanced Upper Receivers"; "Compatible with low profile gas blocks".

- Weight
- 7.95 oz ± 0.005 oz Confirmedpublished: Aero Precision, AR15 15" S-ONE M-LOK Handguard - Anodized Black (APRA500105A), Specifications, the maker, read Oct 13, 2026
- Lowest price
- $204.99 at Sportsman's Warehouse, read Nov 21, 2026 (Anodized Black)
- Maker's number
- APRA500105A
- Colours
- Anodized Black, OD Green Anodized, Kodiak Brown Anodized, Sniper Grey Cerakote, OD Green Cerakote, FDE Cerakote, Burnt Bronze Cerakote
- Drawn as
- modelled
- Maker's page
- aeroprecisionusa.com
In “Aero 16 in, slick rail and a 1-6x”, a build on the start page, as it is.
Its figures
Every figure the site draws and checks it by, with where it came from. Open one for each source's reading, and why one is used where they differ.
Its mounting hardware's weight (the barrel nut, the two taper lock nuts and the turnbuckle screw; not in the build's weight)1.9 oz ± 0.05 ozConflictPublished: Aero Precision, AR15 15" S-ONE M-LOK Handguard - Anodized Black (APRA500105A), Details, "Lightweight By Design", the maker, read Oct 13, 2026
Published “Mounting Hardware Weight: 1.9 oz (same across all S-ONE Handguard options)” used
Aero Precision, AR15 15" S-ONE M-LOK Handguard - Anodized Black (APRA500105A), Details, "Lightweight By Design", the maker, read Oct 13, 2026 the page, harvested Oct 13, 2026
Published “Mounting Hardware Weight: 1.9 oz (same across all S-ONE Handguard options)”
KYGUNCO, AERO PRECISION ATLAS S-One 15" M-LOK AR15 Handguard | Anodized Black (Style RPR-APRA500105A, UPC 815421021042), a seller, read Oct 13, 2026 the page, harvested Oct 13, 2026
The maker's sentence on a seller's page.
Published “Mounting Hardware: 4.72 oz.”
Wing Tactical, Aero Precision ATLAS S-ONE M-LOK Free Float Handguard (one page for every length and colour), Specifications, a seller, read Oct 13, 2026 the page, harvested Oct 13, 2026
The same table lists what comes with it: "1x Barrel Nut 1x Barrel Nut Wrench 1x Mounting Hardware Kit". It doesn't say which of them the 4.72 oz weighs.
The maker's own page for this part, which a seller restates. The 4.72 oz of one seller's table (and of another's total) is two and a half times it and may count the wrench and the shims that come in the bag: neither page says. Kept as a conflict; neither figure is in the build's weight.
aero and wing-tactical differ by 2.82 oz beyond what each states it is good to.
kygunco and wing-tactical differ by 2.82 oz beyond what each states it is good to.
Three pages, two figures. AR15Discounts' page for the blemished one says "Weight: Approximately 12.67 oz (including hardware)" (weight_with_hardware), which is the handguard's 7.95 and Wing Tactical's 4.72 together. Nobody's scale reading is on file. Aero's page for the R-ONE of this length lists 4.72 oz where its R-ONE parent page lists 1.9.
Weight with its hardware, by one seller12.67 oz ± 0.005 ozProvisionalPublished: AR15Discounts, Aero Precision AR-15 15" ATLAS S-ONE M-LOK Handguard - Anodized Black - BLEM (APRA500105BA: the blemished one, a number of its own), a seller, read Oct 13, 2026
Published “Weight: Approximately 12.67 oz (including hardware)” used
AR15Discounts, Aero Precision AR-15 15" ATLAS S-ONE M-LOK Handguard - Anodized Black - BLEM (APRA500105BA: the blemished one, a number of its own), a seller, read Oct 13, 2026 the page, harvested Oct 13, 2026
A seller's figure for the blemished one: 7.95 with 4.72. Not used: the build's weight is the handguard's.
Length (the receiver's face to the end of the last rail slot)15 in ± 0.05 in 381 mmConflictPublished: Aero Precision, AR15 15" S-ONE M-LOK Handguard - Anodized Black (APRA500105A), Specifications, the maker, read Oct 13, 2026
Published “Handguard Length 15"” used
Aero Precision, AR15 15" S-ONE M-LOK Handguard - Anodized Black (APRA500105A), Specifications, the maker, read Oct 13, 2026 the page, harvested Oct 13, 2026
Published “Available in M-LOK profiles with 7.3", 9.3", 10.3", 12.7" and 14.94" options.”
Aero Precision, AR15 15" S-ONE M-LOK Handguard - Anodized Black (APRA500105A), Details, the maker, read Oct 13, 2026 the page, harvested Oct 13, 2026
Published “Actual Length (When Installed): 7-Inch: 7.25" 9-Inch: 9.19" 12-Inch: 12.56" 15-Inch: 14.94"”
Wing Tactical, Aero Precision ATLAS S-ONE M-LOK Free Float Handguard (one page for every length and colour), Specifications, a seller, read Oct 13, 2026 the page, harvested Oct 13, 2026
A seller's table; it doesn't say between what its installed length is taken.
Photo 15.025 in ± 0.03 in
Sportsman's Warehouse's 1200 px copies of Aero's two gallery views of APRA500105A: its right side and its left, harvested
Scale: the view's own eight rail slots, four at each end, on one grid of the standard's pitch (std.picatinny.slot_pitch, .394) 36 pitches from the first to the last: a quadratic from pixels to inches through their centres, each within 0.002 in of it (74.7 px/in at the rear slot rising to 76.5 at the front in the right view, 75.5 falling to 74.8 in the left). Read by its rail's body from its rear face (where the outline's top steps up to the slots' floors, behind the first tooth) to its front end (the last tooth's front face in the band of the tooth tops): 15.026 in the right view, 15.025 in the left
The maker's specification row, with its own rule for what the length spans; on both of its side views the rail runs 15.03 in from its rear face to its front end. The 14.94 of the same page's description and of a seller's table is 0.06 under: taken as the span, it would put the rail's rear face 0.09 in inside the receiver's front shoulder.
aero and aero-description differ by 0.06 in beyond what each states it is good to.
aero and wing-tactical differ by 0.06 in beyond what each states it is good to.
aero-description and photo differ by 0.085 in beyond what each states it is good to.
wing-tactical and photo differ by 0.085 in beyond what each states it is good to.
Aero says what its lengths are between, on this page: "Actual Handguard Lengths 7.3", 9.3", 10.3", 12.7", 15" Aero Precision rail lengths measure from end to end. This is the point of contact at the receiver to the end of the last picatinny slot at the muzzle." The same page says 15" twice in its specification and 14.94" once in its description.
Width across its side faces at their lower edges, where it is widest (the maker's "outside diameter")1.5 in ± 0.05 in 38.1 mmConfirmedPublished: Aero Precision, AR15 15" S-ONE M-LOK Handguard - Anodized Black (APRA500105A), Features, the maker, read Oct 13, 2026
Published “1.5" Outside diameter” used
Aero Precision, AR15 15" S-ONE M-LOK Handguard - Anodized Black (APRA500105A), Features, the maker, read Oct 13, 2026 the page, harvested Oct 13, 2026
Published “Outside Diameter: Height: 1.95" Width: 1.51"”
Wing Tactical, Aero Precision ATLAS S-ONE M-LOK Free Float Handguard (one page for every length and colour), Specifications, a seller, read Oct 13, 2026 the page, harvested Oct 13, 2026
The maker's, to one place; a seller's table of the family says 1.51.
Height (its rail's top to its bottom flat, along the body)1.95 in ± 0.005 in 49.5 mmCorroboratedPublished: Wing Tactical, Aero Precision ATLAS S-ONE M-LOK Free Float Handguard (one page for every length and colour), Specifications, a seller, read Oct 13, 2026
Published “Outside Diameter: Height: 1.95" Width: 1.51"” used
Wing Tactical, Aero Precision ATLAS S-ONE M-LOK Free Float Handguard (one page for every length and colour), Specifications, a seller, read Oct 13, 2026 the page, harvested Oct 13, 2026
Photo 1.95 in ± 0.02 in
Sportsman's Warehouse's 1200 px copies of Aero's two gallery views of APRA500105A: its right side and its left, harvested
Scale: the view's own eight rail slots, four at each end, on one grid of the standard's pitch (std.picatinny.slot_pitch, .394) 36 pitches from the first to the last: a quadratic from pixels to inches through their centres, each within 0.002 in of it (74.7 px/in at the rear slot rising to 76.5 at the front in the right view, 75.5 falling to 74.8 in the left); down the picture at the scale of the middle of the rail (75.56 px/in right, 75.14 left). Read by the teeth's tops to the body's last dark row, away from the clamp: 147.3 rows in the right view (1.949), 146.6 in the left (1.952). The clamp's end reaches 2.13 (2.130, 2.122)
A seller's table of the maker's sizes, to two places, which gives height and width apart; both side views read 1.95 at their own rail's scale.
The body's; the clamp at the receiver's end is deeper (2.13). The maker gives no height.
Inside width (the maker's "inside diameter")1.3 in ± 0.05 in 33 mmConfirmedPublished: Aero Precision, AR15 15" S-ONE M-LOK Handguard - Anodized Black (APRA500105A), Features, the maker, read Oct 13, 2026
Published “1.3" Inside diameter” used
Aero Precision, AR15 15" S-ONE M-LOK Handguard - Anodized Black (APRA500105A), Features, the maker, read Oct 13, 2026 the page, harvested Oct 13, 2026
Published “Inside Diameter: Height: 1.65" Width: 1.3"”
Wing Tactical, Aero Precision ATLAS S-ONE M-LOK Free Float Handguard (one page for every length and colour), Specifications, a seller, read Oct 13, 2026 the page, harvested Oct 13, 2026
The maker's; the seller's table agrees.
Inside height (its floor to the underside of its rail, under its two rail blocks)1.65 in ± 0.005 in 41.9 mmProvisionalPublished: Wing Tactical, Aero Precision ATLAS S-ONE M-LOK Free Float Handguard (one page for every length and colour), Specifications, a seller, read Oct 13, 2026
Published “Inside Diameter: Height: 1.65" Width: 1.3"” used
Wing Tactical, Aero Precision ATLAS S-ONE M-LOK Free Float Handguard (one page for every length and colour), Specifications, a seller, read Oct 13, 2026 the page, harvested Oct 13, 2026
One seller's table, for every length of the S-ONE; it is taken as the R-ONE's is (the same table's figure there): the floor to the top of the arched channel under the rail. Between the two rail blocks the top is 0.24 lower, and the inside's roof there isn't seen (the model's approximations).
Overall length, end to end15.35 in ± 0.03 in 389.9 mmProvisionalPhoto: Sportsman's Warehouse's 1200 px copies of Aero's two gallery views of APRA500105A: its right side and its left
Photo 15.35 in ± 0.03 in used
Sportsman's Warehouse's 1200 px copies of Aero's two gallery views of APRA500105A: its right side and its left, harvested
Scale: the view's own eight rail slots, four at each end, on one grid of the standard's pitch (std.picatinny.slot_pitch, .394) 36 pitches from the first to the last: a quadratic from pixels to inches through their centres, each within 0.002 in of it (74.7 px/in at the rear slot rising to 76.5 at the front in the right view, 75.5 falling to 74.8 in the left). Read by the silhouette's two ends on the rows of the body: 15.357 in the right view, 15.349 in the left
Aero's 15 in runs from the receiver to the end of the last rail slot; the two tabs at its rear reach back past the receiver's shoulder, and its front end is 0.03 past its rail's.
Its rail's front end (the end of the last slot's lug) ahead of the outline's rear end15.321 in ± 0.02 in 389.2 mmProvisionalPhoto: Sportsman's Warehouse's 1200 px copies of Aero's two gallery views of APRA500105A: its right side and its left
Photo 15.321 in ± 0.02 in used
Sportsman's Warehouse's 1200 px copies of Aero's two gallery views of APRA500105A: its right side and its left, harvested
Scale: the view's own eight rail slots, four at each end, on one grid of the standard's pitch (std.picatinny.slot_pitch, .394) 36 pitches from the first to the last: a quadratic from pixels to inches through their centres, each within 0.002 in of it (74.7 px/in at the rear slot rising to 76.5 at the front in the right view, 75.5 falling to 74.8 in the left). Read by the last tooth's front face in the band of the tooth tops: 15.327 from the outline's rear end in the right view, 15.315 in the left
Its rail's rear face (where the rail's body begins, at the slots' floors' height) ahead of the outline's rear end0.296 in ± 0.02 in 7.5 mmProvisionalPhoto: Sportsman's Warehouse's 1200 px copies of Aero's two gallery views of APRA500105A: its right side and its left
Photo 0.296 in ± 0.02 in used
Sportsman's Warehouse's 1200 px copies of Aero's two gallery views of APRA500105A: its right side and its left, harvested
Scale: the view's own eight rail slots, four at each end, on one grid of the standard's pitch (std.picatinny.slot_pitch, .394) 36 pitches from the first to the last: a quadratic from pixels to inches through their centres, each within 0.002 in of it (74.7 px/in at the rear slot rising to 76.5 at the front in the right view, 75.5 falling to 74.8 in the left). Read by where the outline's top steps up from the tabs' (0.42 below the rail's top) to the slots' floors' height: 0.301 ahead of the rear end in the right view, 0.290 in the left. The underside steps down to the clamp's 0.36 ahead of the rear end
What meets the receiver: the two tabs behind it reach back along the receiver's front ring (Wing Tactical: "Built-in anti-rotation tabs"; Aero: "indexing tabs").
Its rear rail block's first slot (its centre) ahead of the outline's rear end0.82 in ± 0.02 in 20.8 mmProvisionalPhoto: Sportsman's Warehouse's 1200 px copies of Aero's two gallery views of APRA500105A: its right side and its left
Photo 0.82 in ± 0.02 in used
Sportsman's Warehouse's 1200 px copies of Aero's two gallery views of APRA500105A: its right side and its left, harvested
Scale: the view's own eight rail slots, four at each end, on one grid of the standard's pitch (std.picatinny.slot_pitch, .394) 36 pitches from the first to the last: a quadratic from pixels to inches through their centres, each within 0.002 in of it (74.7 px/in at the rear slot rising to 76.5 at the front in the right view, 75.5 falling to 74.8 in the left). Read by the outline's rear end on the rows of the body, 0.829 behind the first slot's centre in the right view and 0.812 in the left; a slot's centre is the middle of the gap between two teeth at the 50% level
The ± is the two views' spread. The rear end is a silhouette's (the near tab's end, nearer the lens than the rail's middle), and nothing rests on it: where the grid stands on a rifle is counted back from the rail's front end (rear_x), the same two readings apart.
Slots in its rear rail block4ProvisionalPhoto: Sportsman's Warehouse's 1200 px copies of Aero's two gallery views of APRA500105A: its right side and its left
Photo 4 count used
Sportsman's Warehouse's 1200 px copies of Aero's two gallery views of APRA500105A: its right side and its left, harvested
Scale: counted. Read by the gaps between the five teeth at the receiver's end, in the band of the tooth tops, in both views: 4. Wing Tactical's view from the receiver's end (5bea74f955a3) shows the same five lugs
Aero: "Front and rear picatinny rail"; "Eliminated center of top rail for weight reduction". Behind the first tooth the rail's body runs on at the floors' height for 0.2 in (a land, not counted).
Slots in its front rail block4ProvisionalPhoto: Sportsman's Warehouse's 1200 px copies of Aero's two gallery views of APRA500105A: its right side and its left
Photo 4 count used
Sportsman's Warehouse's 1200 px copies of Aero's two gallery views of APRA500105A: its right side and its left, harvested
Scale: counted. Read by the gaps between the five teeth at the muzzle end, in the band of the tooth tops, in both views: 4
Its front rail block's first slot ahead of its rear block's first (centre to centre)13.002 in 330.3 mmConfirmedWorked out: 33 * {std.picatinny.slot_pitch}
Worked out 13.002 in used
33 * {std.picatinny.slot_pitch}, harvested
The two blocks are on one grid of the standard's pitch, the front block's four slots its 33rd to 36th. Read on both side views (a copy on file and 44cb3b093489 (Sportsman's Warehouse's 1200 px copies of Aero's two gallery views of APRA500105A: its right side and its left)): at the scale each block's own four slots give (74.78 px/in at the rear block and 76.50 at the front in the right view, 75.67 and 74.91 in the left), the rear block's first slot to the front block's last is 35.96 pitches in the right view and 35.94 in the left; and fitted together, all eight centres are within 0.002 in of that grid in each view.
The rail the R-ONE of this length has 37 slots of, with the 29 between left off.
Where the rear block's top begins to fall to the spine, ahead of its first slot1.46 in ± 0.02 in 37.1 mmProvisionalPhoto: Sportsman's Warehouse's 1200 px copies of Aero's two gallery views of APRA500105A: its right side and its left
Photo 1.46 in ± 0.02 in used
Sportsman's Warehouse's 1200 px copies of Aero's two gallery views of APRA500105A: its right side and its left, harvested
Scale: the view's own eight rail slots, four at each end, on one grid of the standard's pitch (std.picatinny.slot_pitch, .394) 36 pitches from the first to the last: a quadratic from pixels to inches through their centres, each within 0.002 in of it (74.7 px/in at the rear slot rising to 76.5 at the front in the right view, 75.5 falling to 74.8 in the left). Read by the outline's top leaves the rail's top between 1.44 and 1.49 ahead of the first slot in both views (0.008 down at 1.440, 0.026 at 1.494 right; 0.002 at 1.439, 0.029 at 1.492 left)
Where the rear block's ramp reaches the spine, ahead of its first slot1.95 in ± 0.03 in 49.5 mmProvisionalPhoto: Sportsman's Warehouse's 1200 px copies of Aero's two gallery views of APRA500105A: its right side and its left
Photo 1.95 in ± 0.03 in used
Sportsman's Warehouse's 1200 px copies of Aero's two gallery views of APRA500105A: its right side and its left, harvested
Scale: the view's own eight rail slots, four at each end, on one grid of the standard's pitch (std.picatinny.slot_pitch, .394) 36 pitches from the first to the last: a quadratic from pixels to inches through their centres, each within 0.002 in of it (74.7 px/in at the rear slot rising to 76.5 at the front in the right view, 75.5 falling to 74.8 in the left). Read by the outline's top is within 0.01 of the spine's height from 1.92 to 1.98 ahead of the first slot (0.239 down at 1.921 and 0.245 at 1.975 right; 0.235 at 1.916, 0.237 at 1.969 left). Between, it falls in an S: 0.065 down at 1.547, 0.140 at 1.654, 0.195 at 1.761, 0.229 at 1.868
Where the front block's ramp leaves the spine, ahead of the rear block's first slot12.27 in ± 0.03 in 311.7 mmProvisionalPhoto: Sportsman's Warehouse's 1200 px copies of Aero's two gallery views of APRA500105A: its right side and its left
Photo 12.27 in ± 0.03 in used
Sportsman's Warehouse's 1200 px copies of Aero's two gallery views of APRA500105A: its right side and its left, harvested
Scale: the view's own eight rail slots, four at each end, on one grid of the standard's pitch (std.picatinny.slot_pitch, .394) 36 pitches from the first to the last: a quadratic from pixels to inches through their centres, each within 0.002 in of it (74.7 px/in at the rear slot rising to 76.5 at the front in the right view, 75.5 falling to 74.8 in the left). Read by the outline's top begins to rise at 12.25 to 12.31 (0.234 down at 12.245 and 0.227 at 12.297 right; 0.237 at 12.243, 0.233 at 12.297 left); 0.170 down at 12.455, 0.105 at 12.560, 0.030 at 12.665
Where the front block's top is reached, ahead of the rear block's first slot12.72 in ± 0.02 in 323.1 mmProvisionalPhoto: Sportsman's Warehouse's 1200 px copies of Aero's two gallery views of APRA500105A: its right side and its left
Photo 12.72 in ± 0.02 in used
Sportsman's Warehouse's 1200 px copies of Aero's two gallery views of APRA500105A: its right side and its left, harvested
Scale: the view's own eight rail slots, four at each end, on one grid of the standard's pitch (std.picatinny.slot_pitch, .394) 36 pitches from the first to the last: a quadratic from pixels to inches through their centres, each within 0.002 in of it (74.7 px/in at the rear slot rising to 76.5 at the front in the right view, 75.5 falling to 74.8 in the left). Read by the outline's top reaches the rail's top at 12.727 in the right view (0.001 down) and 12.73 in the left (0.010 down at 12.734)
The spine's top between the two rail blocks, below the rail's top0.242 in ± 0.015 in 6.1 mmProvisionalPhoto: Sportsman's Warehouse's 1200 px copies of Aero's two gallery views of APRA500105A: its right side and its left
Photo 0.242 in ± 0.015 in used
Sportsman's Warehouse's 1200 px copies of Aero's two gallery views of APRA500105A: its right side and its left, harvested
Scale: the view's own eight rail slots, four at each end, on one grid of the standard's pitch (std.picatinny.slot_pitch, .394) 36 pitches from the first to the last: a quadratic from pixels to inches through their centres, each within 0.002 in of it (74.7 px/in at the rear slot rising to 76.5 at the front in the right view, 75.5 falling to 74.8 in the left); down the picture at the scale of the middle of the rail. Read by the outline's top between the ribs, median over its length: 18.3 rows under the teeth's tops in both views (0.243 right, 0.241 left)
Wing Tactical: "Eliminated center of top rail for weight reduction".
The spine's top, across0.62 in ± 0.03 in 15.7 mmProvisionalPhoto: Wing Tactical's gallery: an S-ONE from its receiver end, looking forward along its top, its barrel nut in it; the page is for every length and doesn't say which this is
Photo 0.62 in ± 0.03 in used
Wing Tactical's gallery: an S-ONE from its receiver end, looking forward along its top, its barrel nut in it; the page is for every length and doesn't say which this is, harvested
Scale: the rear rail block's head at the standard's .835 across its widest (std.picatinny.top_width), which shows on its first tooth's rear face: 295.5 px on rows 494 to 500, 353.9 px/in there; the front block's head, 13.0 in further off, is 148 px across, which puts the lens 13.0 in from that tooth; the spine's rear end is 2.3 in further off: 301 px/in. Read by the spine's top where it leaves the rear block's ramp: 187 px across
As wide as the neck the rail blocks stand on (rail_neck_width, 0.594) within what the two readings carry: the spine is drawn as that neck cut down to a flat top.
The inside's roof under the spine, below the rail's top0.292 in ± 0.04 in 7.4 mmProvisionalWorked out: ({.spine_below_rail_top} + {.rail_top_above_bore} - {std.ar15.gas_tube_above_bore} - {aero-mid-gas-tube.od} / 2) / 2
Worked out 0.2922 in ± 0.04 in used
({.spine_below_rail_top} + {.rail_top_above_bore} - {std.ar15.gas_tube_above_bore} - {aero-mid-gas-tube.od} / 2) / 2, harvested
Not read: no view on file shows the inside under the spine. It lies between two things that are sourced: the spine's top (0.242 under the rail's top) and the top of a gas tube's rear run, which passes under the spine's rear end 0.3425 under the rail's top (the standard's height for the tube above the bore and half a tube's diameter over it). The roof is drawn midway: a twentieth of an inch of metal over it and a twentieth of room under it. The ± is all the room there is either way.
An assumption with two sourced bounds, listed in the part's approximations. The published wall (a tenth, from the two widths) can't be the roof's thickness here: a tenth under the spine's top is the tube's top.
A rib across the spine: its top above the spine's0.03 in ± 0.01 in 0.8 mmProvisionalPhoto: Sportsman's Warehouse's 1200 px copies of Aero's two gallery views of APRA500105A: its right side and its left
Photo 0.03 in ± 0.01 in used
Sportsman's Warehouse's 1200 px copies of Aero's two gallery views of APRA500105A: its right side and its left, harvested
Scale: the view's own eight rail slots, four at each end, on one grid of the standard's pitch (std.picatinny.slot_pitch, .394) 36 pitches from the first to the last: a quadratic from pixels to inches through their centres, each within 0.002 in of it (74.7 px/in at the rear slot rising to 76.5 at the front in the right view, 75.5 falling to 74.8 in the left); down the picture at the scale of the middle of the rail. Read by the nine bumps of the outline's top between the blocks: 0.028 to 0.032 high in the right view, 0.027 to 0.031 in the left
Aero: "Indexing grooves in 12:00 position for positive grip control".
A rib across the spine: its length along the handguard0.15 in ± 0.03 in 3.8 mmProvisionalPhoto: Sportsman's Warehouse's 1200 px copies of Aero's two gallery views of APRA500105A: its right side and its left
Photo 0.15 in ± 0.03 in used
Sportsman's Warehouse's 1200 px copies of Aero's two gallery views of APRA500105A: its right side and its left, harvested
Scale: the view's own eight rail slots, four at each end, on one grid of the standard's pitch (std.picatinny.slot_pitch, .394) 36 pitches from the first to the last: a quadratic from pixels to inches through their centres, each within 0.002 in of it (74.7 px/in at the rear slot rising to 76.5 at the front in the right view, 75.5 falling to 74.8 in the left). Read by where the outline's top stands more than 0.01 above the spine's: 0.16 to 0.19 long in the right view, 0.13 to 0.15 in the left
Ribs across the spine9ProvisionalPhoto: Sportsman's Warehouse's 1200 px copies of Aero's two gallery views of APRA500105A: its right side and its left
Photo 9 count used
Sportsman's Warehouse's 1200 px copies of Aero's two gallery views of APRA500105A: its right side and its left, harvested
Scale: counted. Read by the bumps of the outline's top between the two ramps, in both views: 9, a thin slot's pitch apart, each over the bar between two thin slots (their middles 2.69 to 11.23 ahead of the rail's first slot; the bars' are 2.70 to 11.23). The bars at each end of the row are under the ramps' feet
The handguard's rear end (its two tabs' ends) against the receiver's front face (negative: behind it)-0.766 in ± 0.02 in -19.5 mmProvisionalWorked out: 0in - {std.ar15.upper_barrel_thread_length} - ({.rail_front_from_rear} - {.length})
Worked out -0.766 in ± 0.02 in used
0in - {std.ar15.upper_barrel_thread_length} - ({.rail_front_from_rear} - {.length}), harvested
Aero's rule for its length ("the point of contact at the receiver to the end of the last picatinny slot at the muzzle"): 15 in back from the rail's front end is 0.321 ahead of the tabs' ends, at the receiver's front shoulder, where its barrel-nut thread begins.
Worked out -0.741 in ± 0.02 in
0in - {std.ar15.upper_barrel_thread_length} - {.rail_rear_face_from_rear}, harvested
The rail's own rear face, as its side views have it, on the receiver's front shoulder: 0.025 from the rule's.
The maker's own rule for its length on its own side views; the rail's rear face read on the same views lands within 0.025 in of the receiver's shoulder.
No photo of this handguard on a receiver is on file (KYGUNCO's picture of the complete upper APAR700305M7 is on a host whose robots.txt answers 400: left alone).
Its rail's top above the bore axis1.212 in ± 0.02 in 30.8 mmCorroboratedWorked out: {aero-m4e1-threaded-upper.rail_top_above_pin} - {aero-m4e1-threaded-upper.bore_axis_above_pin}
Worked out 1.2125 in ± 0.02 in used
{aero-m4e1-threaded-upper.rail_top_above_pin} - {aero-m4e1-threaded-upper.bore_axis_above_pin}, harvested
Level with the receiver's rail. Aero, this page: "ATLAS Handguards are designed to match seamlessly with our M4E1 Threaded Upper Receivers." Its page for that upper says its picatinny profile "blends seamlessly with our R-ONE, S-ONE and Enhanced Handguards". So the receiver's rail top above the pin line less the bore's height above it.
Its side faces' upper edge, below the rail's top0.885 in ± 0.02 in 22.5 mmProvisionalPhoto: Sportsman's Warehouse's 1200 px copies of Aero's two gallery views of APRA500105A: its right side and its left
Photo 0.885 in ± 0.02 in used
Sportsman's Warehouse's 1200 px copies of Aero's two gallery views of APRA500105A: its right side and its left, harvested
Scale: the view's own eight rail slots, four at each end, on one grid of the standard's pitch (std.picatinny.slot_pitch, .394) 36 pitches from the first to the last: a quadratic from pixels to inches through their centres, each within 0.002 in of it (74.7 px/in at the rear slot rising to 76.5 at the front in the right view, 75.5 falling to 74.8 in the left); down the picture at the scale of the middle of the rail. Read by the tone down the solid bars between its openings (4.85 and 8.02 ahead of the rail's first slot, where a thin slot's bar and an M-LOK bar are one): the upper face's (70 to 110) gives way to the side face's even tone (36 to 38 right, 46 to 48 left) between 0.87 and 0.90 in all four columns
Worked out 0.88 in ± 0.02 in
{aero-r-one-15-handguard.side_flat_top_below_rail_top}, harvested
The R-ONE's, read the same way on its own side views.
This handguard's own side views; the R-ONE's reads the same within 0.005.
Its side faces' lower edge, below the rail's top1.51 in ± 0.02 in 38.4 mmProvisionalPhoto: Sportsman's Warehouse's 1200 px copies of Aero's two gallery views of APRA500105A: its right side and its left
Photo 1.51 in ± 0.02 in used
Sportsman's Warehouse's 1200 px copies of Aero's two gallery views of APRA500105A: its right side and its left, harvested
Scale: the view's own eight rail slots, four at each end, on one grid of the standard's pitch (std.picatinny.slot_pitch, .394) 36 pitches from the first to the last: a quadratic from pixels to inches through their centres, each within 0.002 in of it (74.7 px/in at the rear slot rising to 76.5 at the front in the right view, 75.5 falling to 74.8 in the left); down the picture at the scale of the middle of the rail. Read by the same four columns: the side face's even tone ends between 1.50 and 1.53
Worked out 1.502 in ± 0.015 in
{aero-r-one-15-handguard.side_flat_bottom_below_rail_top}, harvested
The R-ONE's, read on the view square on to its muzzle end.
This handguard's own side views; the R-ONE's end view reads 0.008 from it.
Width across its side faces at their upper edges1.455 in ± 0.012 in 37 mmProvisionalWorked out: {aero-r-one-15-handguard.side_top_width}
Worked out 1.455 in used
{aero-r-one-15-handguard.side_top_width}, harvested
Read on the R-ONE's view square on to its muzzle end (its ledger says how). The S-ONE is the same series with the middle of its rail taken off (Aero's Series row for both: "R-ONE/S-ONE"; Wing Tactical's table gives both the same four section figures, outside 1.95 by 1.51 and inside 1.65 by 1.3), no view square on to an S-ONE's end is on file, and its own views show the same faces: flat side faces a little nearer each other at their tops (5bea74f955a3, 5a32198025ae).
Not this handguard's own reading: the R-ONE's figure by reference. A view square on to an S-ONE's end would replace it.
Its bottom flat (6 o'clock), across0.609 in ± 0.015 in 15.5 mmProvisionalWorked out: {aero-r-one-15-handguard.bottom_flat_width}
Worked out 0.609 in used
{aero-r-one-15-handguard.bottom_flat_width}, harvested
Read on the R-ONE's view square on to its muzzle end (its ledger says how). The S-ONE is the same series with the middle of its rail taken off (Aero's Series row for both: "R-ONE/S-ONE"; Wing Tactical's table gives both the same four section figures, outside 1.95 by 1.51 and inside 1.65 by 1.3), no view square on to an S-ONE's end is on file, and its own views show the same faces: a flat at 6 o'clock with the detent's set screw in it at the receiver's end (5bea74f955a3) and a flat between two faces at the muzzle end (5a32198025ae).
Not this handguard's own reading: the R-ONE's figure by reference. A view square on to an S-ONE's end would replace it.
Width across the edges between its two lower faces (each side: the steep one under the side face, the shallow one into the bottom flat)1.133 in ± 0.015 in 28.8 mmCorroboratedWorked out: {aero-r-one-15-handguard.lower_edge_width}
Worked out 1.133 in used
{aero-r-one-15-handguard.lower_edge_width}, harvested
Read on the R-ONE's view square on to its muzzle end (its ledger says how). The S-ONE is the same series with the middle of its rail taken off (Aero's Series row for both: "R-ONE/S-ONE"; Wing Tactical's table gives both the same four section figures, outside 1.95 by 1.51 and inside 1.65 by 1.3), no view square on to an S-ONE's end is on file, and its own views show the same faces: two lower faces a side with a turn between them. Its far side's silhouette at the muzzle end in Wing Tactical's three-quarter view (5a32198025ae, rows 900 to 1003) is two straight stretches, 32 and 54 degrees from upright in the picture, with a turn of 22 degrees between them; and its side views have a row of thin slots in each, as the R-ONE's have.
Not this handguard's own reading: the R-ONE's figure by reference. A view square on to an S-ONE's end would replace it.
The edges between its two lower faces, below the rail's top1.759 in ± 0.012 in 44.7 mmCorroboratedWorked out: {aero-r-one-15-handguard.lower_edge_below_rail_top}
Worked out 1.759 in used
{aero-r-one-15-handguard.lower_edge_below_rail_top}, harvested
Read on the R-ONE's view square on to its muzzle end (its ledger says how). The S-ONE is the same series with the middle of its rail taken off (Aero's Series row for both: "R-ONE/S-ONE"; Wing Tactical's table gives both the same four section figures, outside 1.95 by 1.51 and inside 1.65 by 1.3), no view square on to an S-ONE's end is on file, and its own views show the same faces: the turn between two lower faces (lower_edge_width's note).
Not this handguard's own reading: the R-ONE's figure by reference. A view square on to an S-ONE's end would replace it.
A bridge's top below the ears' (the lugs that have a middle)0.03 in ± 0.015 in 0.8 mmProvisionalWorked out: {aero-r-one-15-handguard.rail_bridge_recess}
Worked out 0.03 in used
{aero-r-one-15-handguard.rail_bridge_recess}, harvested
Read on the R-ONE's view square on to its muzzle end (its ledger says how). The S-ONE is the same series with the middle of its rail taken off (Aero's Series row for both: "R-ONE/S-ONE"; Wing Tactical's table gives both the same four section figures, outside 1.95 by 1.51 and inside 1.65 by 1.3), no view square on to an S-ONE's end is on file, and its own views show the same faces: the bridged lugs' middles a step below their ears (5bea74f955a3).
Not this handguard's own reading: the R-ONE's figure by reference. A view square on to an S-ONE's end would replace it.
A window along a rail block (the middle of an open lug, cut down between two bridged ones)0.54 in ± 0.05 in 13.7 mmProvisionalWorked out: {aero-r-one-15-handguard.rail_window_length}
Worked out 0.54 in used
{aero-r-one-15-handguard.rail_window_length}, harvested
Read on the R-ONE's view square on to its muzzle end (its ledger says how). The S-ONE is the same series with the middle of its rail taken off (Aero's Series row for both: "R-ONE/S-ONE"; Wing Tactical's table gives both the same four section figures, outside 1.95 by 1.51 and inside 1.65 by 1.3), no view square on to an S-ONE's end is on file, and its own views show the same faces: the second and fourth lug of each block open between their ears into a pocket with round ends that runs from one bridged lug to the next, deep and dark in both three-quarter views from above (fd3b9101db2b for the front block, 93c8ecc9fc0e for the rear).
Not this handguard's own reading: the R-ONE's figure by reference. A view square on to an S-ONE's end would replace it.
The neck's foot, where the two upper faces leave it, below the rail's top0.38 in ± 0.02 in 9.7 mmProvisionalPhoto: Sportsman's Warehouse's 1200 px copies of Aero's two gallery views of APRA500105A: its right side and its left
Photo 0.38 in ± 0.02 in used
Sportsman's Warehouse's 1200 px copies of Aero's two gallery views of APRA500105A: its right side and its left, harvested
Scale: the view's own eight rail slots, four at each end, on one grid of the standard's pitch (std.picatinny.slot_pitch, .394) 36 pitches from the first to the last: a quadratic from pixels to inches through their centres, each within 0.002 in of it (74.7 px/in at the rear slot rising to 76.5 at the front in the right view, 75.5 falling to 74.8 in the left); down the picture at the scale of the middle of the rail. Read by the tone down the solid bars between its openings (4.85 and 8.02 ahead of the rail's first slot): under the spine's edge the neck's upright wall (55 to 79) gives way to the lit upper face (85 to 106) between 0.36 and 0.40 below the teeth's tops in all four columns
Worked out 0.377 in ± 0.015 in
{aero-r-one-15-handguard.rail_neck_foot_below_rail_top}, harvested
The R-ONE's, read on the view square on to its muzzle end.
This handguard's own side views; the R-ONE's end view reads 0.003 from it.
The neck its rail blocks stand on (under the rail's head, above the two upper faces), across0.594 in ± 0.02 in 15.1 mmProvisionalPhoto: Wing Tactical's gallery: an S-ONE from its receiver end, looking forward along its top, its barrel nut in it; the page is for every length and doesn't say which this is
Photo 0.594 in ± 0.02 in used
Wing Tactical's gallery: an S-ONE from its receiver end, looking forward along its top, its barrel nut in it; the page is for every length and doesn't say which this is, harvested
Scale: the rear rail block's head at the standard's .835 across its widest (std.picatinny.top_width), which shows on its first tooth's rear face: 295.5 px on rows 494 to 500, 353.9 px/in there; the front block's head, 13.0 in further off, is 148 px across, which puts the lens 13.0 in from that tooth; the rail's rear face, where the neck's two edges show, is 0.23 in nearer: 360 px/in. Read by the neck's two edges against the lit upper faces, rows 554 to 650: columns 541 and 755, 214 px. The arched opening under the head is 148 px between its upright sides on rows 608 to 650 (0.411 in: the neck less two walls of a tenth, within 0.02)
Worked out 0.62 in ± 0.015 in
{aero-r-one-15-handguard.rail_neck_width}, harvested
The R-ONE's, read on the view square on to its muzzle end.
This handguard's own view from its receiver end, at its own rail head's scale; the R-ONE's reads 0.026 from it.
Its rail blocks' middle, between the two ears of a lug0.4 in ± 0.02 in 10.2 mmProvisionalPhoto: Wing Tactical's gallery: an S-ONE from its receiver end, looking forward along its top, its barrel nut in it; the page is for every length and doesn't say which this is
Photo 0.4 in ± 0.02 in used
Wing Tactical's gallery: an S-ONE from its receiver end, looking forward along its top, its barrel nut in it; the page is for every length and doesn't say which this is, harvested
Scale: the rear rail block's head at the standard's .835 across its widest (std.picatinny.top_width), which shows on its first tooth's rear face: 295.5 px on rows 494 to 500, 353.9 px/in there; the front block's head, 13.0 in further off, is 148 px across, which puts the lens 13.0 in from that tooth; the rear block's second lug is 0.49 in further off: 341 px/in. Read by the second lug's two ears' inner edges, rows 440 to 458: columns 577 and 713, 136 px. The view shows every lug of the rear block cut down its middle between two ears, the first, third and fifth bridged a step below the ears' tops; a three-quarter view of the muzzle end (5a32198025ae) has the front block the same way, its lug at the muzzle end whole
Worked out 0.365 in ± 0.02 in
{aero-r-one-15-handguard.rail_centre_gap}, harvested
The R-ONE's, read on the view square on to its muzzle end.
This handguard's own view from its receiver end, at its own rail head's scale; the R-ONE's reads 0.035 less, inside what the two readings carry between them.
The rearmost M-LOK slot's centre on its sides, ahead of its rail's first slot4.073 in ± 0.015 in 103.5 mmProvisionalPhoto: Sportsman's Warehouse's 1200 px copies of Aero's two gallery views of APRA500105A: its right side and its left
Photo 4.073 in ± 0.015 in used
Sportsman's Warehouse's 1200 px copies of Aero's two gallery views of APRA500105A: its right side and its left, harvested
Scale: the view's own eight rail slots, four at each end, on one grid of the standard's pitch (std.picatinny.slot_pitch, .394) 36 pitches from the first to the last: a quadratic from pixels to inches through their centres, each within 0.002 in of it (74.7 px/in at the rear slot rising to 76.5 at the front in the right view, 75.5 falling to 74.8 in the left). Read by the seven long openings' centres along their row where the far side's shows through the near (see-through, so read at the rail's own scale), fitted to the M-LOK pitch (std.mlok.slot_pitch): their own pitch is 1.5738 in the right view and 1.5752 in the left for the standard's 1.5748, and the first's centre comes to 4.075 and 4.071
The rearmost M-LOK slot's centre on its sides, ahead of the receiver's face4.127 in ± 0.032 in 104.8 mmProvisionalWorked out: {.rear_x} + {.rail_slot0_from_rear} + {.mlok_slot0_from_rail_slot0}
Worked out 4.127 in used
{.rear_x} + {.rail_slot0_from_rear} + {.mlok_slot0_from_rail_slot0}, harvested
Its rear rail block's first slot (its centre) ahead of the receiver's face0.054 in ± 0.028 in 1.4 mmProvisionalWorked out: {.rear_x} + {.rail_slot0_from_rear}
Worked out 0.054 in used
{.rear_x} + {.rail_slot0_from_rear}, harvested
14.501 in behind the rail's front end, which the maker's length puts 15 in ahead of the receiver's shoulder: the rear end's own reading cancels.
Its front rail block's first slot (its centre) ahead of the receiver's face13.056 in 331.6 mmProvisionalWorked out: {.rail_slot0_x} + {.rail_front_slot0_from_slot0}
Worked out 13.056 in used
{.rail_slot0_x} + {.rail_front_slot0_from_slot0}, harvested
How many M-LOK slots on each side7ProvisionalPhoto: Sportsman's Warehouse's 1200 px copies of Aero's two gallery views of APRA500105A: its right side and its left
Photo 7 count used
Sportsman's Warehouse's 1200 px copies of Aero's two gallery views of APRA500105A: its right side and its left, harvested
Scale: counted. Read by the long openings along the middle row of each side view: 7 in both, behind them one short slot and a round socket
The M-LOK row's middle on its sides, below the rail's top1.17 in ± 0.02 in 29.7 mmProvisionalPhoto: Sportsman's Warehouse's 1200 px copies of Aero's two gallery views of APRA500105A: its right side and its left
Photo 1.17 in ± 0.02 in used
Sportsman's Warehouse's 1200 px copies of Aero's two gallery views of APRA500105A: its right side and its left, harvested
Scale: the view's own eight rail slots, four at each end, on one grid of the standard's pitch (std.picatinny.slot_pitch, .394) 36 pitches from the first to the last: a quadratic from pixels to inches through their centres, each within 0.002 in of it (74.7 px/in at the rear slot rising to 76.5 at the front in the right view, 75.5 falling to 74.8 in the left); down the picture at the scale of the middle of the rail. Read by the middle of the long openings' see-through height: 1.050 to 1.292 below the teeth's tops in the right view (1.171), 1.050 to 1.290 in the left (1.170). The socket's is 1.169 and 1.168
0.04 above the bore's level with the rail's top where the receiver's is (rail_top_above_bore), and within 0.03 of the middle of the side face it is in (0.885 to 1.51).
The short slot behind the M-LOK slots (in their row), its centre ahead of the rail's first slot2.888 in ± 0.015 in 73.4 mmProvisionalPhoto: Sportsman's Warehouse's 1200 px copies of Aero's two gallery views of APRA500105A: its right side and its left
Photo 2.888 in ± 0.015 in used
Sportsman's Warehouse's 1200 px copies of Aero's two gallery views of APRA500105A: its right side and its left, harvested
Scale: the view's own eight rail slots, four at each end, on one grid of the standard's pitch (std.picatinny.slot_pitch, .394) 36 pitches from the first to the last: a quadratic from pixels to inches through their centres, each within 0.002 in of it (74.7 px/in at the rear slot rising to 76.5 at the front in the right view, 75.5 falling to 74.8 in the left). Read by the short opening's see-through middle: 2.887 in the right view, 2.889 in the left
The short slot's length0.39 in ± 0.02 in 9.9 mmProvisionalPhoto: Sportsman's Warehouse's 1200 px copies of Aero's two gallery views of APRA500105A: its right side and its left
Photo 0.39 in ± 0.02 in used
Sportsman's Warehouse's 1200 px copies of Aero's two gallery views of APRA500105A: its right side and its left, harvested
Scale: the view's own eight rail slots, four at each end, on one grid of the standard's pitch (std.picatinny.slot_pitch, .394) 36 pitches from the first to the last: a quadratic from pixels to inches through their centres, each within 0.002 in of it (74.7 px/in at the rear slot rising to 76.5 at the front in the right view, 75.5 falling to 74.8 in the left). Read by its see-through length: 0.381 in the right view, 0.395 in the left (at least: the far side's end hides a little of the near's)
The QD sling socket on each side (3 and 9 o'clock), its centre ahead of the rail's first slot1.853 in ± 0.015 in 47.1 mmProvisionalPhoto: Sportsman's Warehouse's 1200 px copies of Aero's two gallery views of APRA500105A: its right side and its left
Photo 1.853 in ± 0.015 in used
Sportsman's Warehouse's 1200 px copies of Aero's two gallery views of APRA500105A: its right side and its left, harvested
Scale: the view's own eight rail slots, four at each end, on one grid of the standard's pitch (std.picatinny.slot_pitch, .394) 36 pitches from the first to the last: a quadratic from pixels to inches through their centres, each within 0.002 in of it (74.7 px/in at the rear slot rising to 76.5 at the front in the right view, 75.5 falling to 74.8 in the left). Read by the round opening's see-through middle: 1.853 in both views
Aero: "Quick disconnect sling socket at the 3, 6 and 9 o'clock positions".
The QD sling socket's diameter, as it shows0.35 in ± 0.03 in 8.9 mmProvisionalPhoto: Sportsman's Warehouse's 1200 px copies of Aero's two gallery views of APRA500105A: its right side and its left
Photo 0.35 in ± 0.03 in used
Sportsman's Warehouse's 1200 px copies of Aero's two gallery views of APRA500105A: its right side and its left, harvested
Scale: the view's own eight rail slots, four at each end, on one grid of the standard's pitch (std.picatinny.slot_pitch, .394) 36 pitches from the first to the last: a quadratic from pixels to inches through their centres, each within 0.002 in of it (74.7 px/in at the rear slot rising to 76.5 at the front in the right view, 75.5 falling to 74.8 in the left); down the picture at the scale of the middle of the rail. Read by its see-through height, 0.32 in both views, and what the far rim hides of it from a lens a little above the rail's level: the M-LOK slots beside it show 0.242 of the standard's 0.276 the same way (0.034)
The opening as it shows, not the socket's standard size, which no page gives.
The thin slots' first centre ahead of the rail's first slot (all four rows)2.168 in ± 0.01 in 55.1 mmProvisionalPhoto: Sportsman's Warehouse's 1200 px copies of Aero's two gallery views of APRA500105A: its right side and its left
Photo 2.168 in ± 0.01 in used
Sportsman's Warehouse's 1200 px copies of Aero's two gallery views of APRA500105A: its right side and its left, harvested
Scale: the view's own eight rail slots, four at each end, on one grid of the standard's pitch (std.picatinny.slot_pitch, .394) 36 pitches from the first to the last: a quadratic from pixels to inches through their centres, each within 0.002 in of it (74.7 px/in at the rear slot rising to 76.5 at the front in the right view, 75.5 falling to 74.8 in the left). Read by the first see-through opening of each row: 2.171, 2.172, 2.169 and 2.173 in the right view's four rows, 2.175, 2.163 and 2.162 in the left's three that show
The thin slots' pitch along each row1.066 in ± 0.002 in 27.1 mmProvisionalPhoto: Sportsman's Warehouse's 1200 px copies of Aero's two gallery views of APRA500105A: its right side and its left
Photo 1.0664 in ± 0.002 in used
Sportsman's Warehouse's 1200 px copies of Aero's two gallery views of APRA500105A: its right side and its left, harvested
Scale: the view's own eight rail slots, four at each end, on one grid of the standard's pitch (std.picatinny.slot_pitch, .394) 36 pitches from the first to the last: a quadratic from pixels to inches through their centres, each within 0.002 in of it (74.7 px/in at the rear slot rising to 76.5 at the front in the right view, 75.5 falling to 74.8 in the left). Read by a row's twelve see-through openings, first to last over eleven pitches: 1.0659 in the right view's lower inner row, 1.0667 and 1.0669 in the left's two inner rows
Thin slots in each row12ProvisionalPhoto: Sportsman's Warehouse's 1200 px copies of Aero's two gallery views of APRA500105A: its right side and its left
Photo 12 count used
Sportsman's Warehouse's 1200 px copies of Aero's two gallery views of APRA500105A: its right side and its left, harvested
Scale: counted. Read by the see-through openings along each inner row, in both views: 12 (the outer rows show 11 or 12 of them: the far side hides more of those)
A thin slot's length (at least: what shows through both walls)0.93 in ± 0.02 in 23.6 mmProvisionalPhoto: Sportsman's Warehouse's 1200 px copies of Aero's two gallery views of APRA500105A: its right side and its left
Photo 0.93 in ± 0.02 in used
Sportsman's Warehouse's 1200 px copies of Aero's two gallery views of APRA500105A: its right side and its left, harvested
Scale: the view's own eight rail slots, four at each end, on one grid of the standard's pitch (std.picatinny.slot_pitch, .394) 36 pitches from the first to the last: a quadratic from pixels to inches through their centres, each within 0.002 in of it (74.7 px/in at the rear slot rising to 76.5 at the front in the right view, 75.5 falling to 74.8 in the left). Read by the longest see-through openings, those nearest the lens's axis: 0.930 in the right view, 0.930 in the left; they shorten to 0.83 toward each end as the far side's ends hide the near's
A thin slot's width, across the slanted face it is in0.22 in ± 0.04 in 5.6 mmProvisionalWorked out: {aero-r-one-15-handguard.thin_slot_width}
Worked out 0.22 in used
{aero-r-one-15-handguard.thin_slot_width}, harvested
The R-ONE's openings as its side views have their rims. This handguard's see-through windows are as tall as the R-ONE's row for row (0.04 for the upper outer row, 0.09 the upper inner, 0.10 the lower inner, 0.03 the lower outer), which is what an opening of that width leaves through both walls.
Not this handguard's own reading of the rims: the R-ONE's figure by reference.
The upper outer row of thin slots, its height above the bore0.71 in ± 0.02 in 18 mmConflictWorked out: {aero-r-one-15-handguard.thin_slot_row_a_y}
Photo 0.648 in ± 0.02 in
Sportsman's Warehouse's 1200 px copies of Aero's two gallery views of APRA500105A: its right side and its left, harvested
Scale: the view's own eight rail slots, four at each end, on one grid of the standard's pitch (std.picatinny.slot_pitch, .394) 36 pitches from the first to the last: a quadratic from pixels to inches through their centres, each within 0.002 in of it (74.7 px/in at the rear slot rising to 76.5 at the front in the right view, 75.5 falling to 74.8 in the left); down the picture at the scale of the middle of the rail. Read by the middle of the row's see-through window, 0.564 below the teeth's tops in both views, from the rail's top at rail_top_above_bore
Worked out 0.71 in ± 0.02 in used
{aero-r-one-15-handguard.thin_slot_row_a_y}, harvested
The R-ONE's row, where its side views have the opening's own rim.
The opening's rim as the R-ONE's side views have it: this handguard's see-through windows match the R-ONE's within 0.012 in, so its openings are taken to stand where the R-ONE's do, each down the middle of its own face.
photo and r-one-opening differ by 0.062 in beyond what each states it is good to.
What shows through both walls isn't the opening: the faces slant, and the far side's rim hides part of the near's. The R-ONE's rows were read both ways; this handguard's see-through windows stand within 0.012 in of the R-ONE's, row for row (0.565, 0.773, 1.587 and 1.805 below the rail's top here; 0.553, 0.770, 1.598 and 1.813 there).
The upper inner row of thin slots, its height above the bore0.46 in ± 0.02 in 11.7 mmCorroboratedWorked out: {aero-r-one-15-handguard.thin_slot_row_b_y}
Photo 0.44 in ± 0.02 in
Sportsman's Warehouse's 1200 px copies of Aero's two gallery views of APRA500105A: its right side and its left, harvested
Scale: the view's own eight rail slots, four at each end, on one grid of the standard's pitch (std.picatinny.slot_pitch, .394) 36 pitches from the first to the last: a quadratic from pixels to inches through their centres, each within 0.002 in of it (74.7 px/in at the rear slot rising to 76.5 at the front in the right view, 75.5 falling to 74.8 in the left); down the picture at the scale of the middle of the rail. Read by the middle of the row's see-through window, 0.772 below the teeth's tops in both views, from the rail's top at rail_top_above_bore
Worked out 0.46 in ± 0.02 in used
{aero-r-one-15-handguard.thin_slot_row_b_y}, harvested
The R-ONE's row, where its side views have the opening's own rim.
The opening's rim as the R-ONE's side views have it: this handguard's see-through windows match the R-ONE's within 0.012 in, so its openings are taken to stand where the R-ONE's do, each down the middle of its own face.
What shows through both walls isn't the opening: the faces slant, and the far side's rim hides part of the near's. The R-ONE's rows were read both ways; this handguard's see-through windows stand within 0.012 in of the R-ONE's, row for row (0.565, 0.773, 1.587 and 1.805 below the rail's top here; 0.553, 0.770, 1.598 and 1.813 there).
The lower inner row of thin slots, its height above the bore-0.41 in ± 0.02 in -10.4 mmCorroboratedWorked out: {aero-r-one-15-handguard.thin_slot_row_d_y}
Photo -0.374 in ± 0.02 in
Sportsman's Warehouse's 1200 px copies of Aero's two gallery views of APRA500105A: its right side and its left, harvested
Scale: the view's own eight rail slots, four at each end, on one grid of the standard's pitch (std.picatinny.slot_pitch, .394) 36 pitches from the first to the last: a quadratic from pixels to inches through their centres, each within 0.002 in of it (74.7 px/in at the rear slot rising to 76.5 at the front in the right view, 75.5 falling to 74.8 in the left); down the picture at the scale of the middle of the rail. Read by the middle of the row's see-through window, 1.587 below the teeth's tops in both views, from the rail's top at rail_top_above_bore
Worked out -0.41 in ± 0.02 in used
{aero-r-one-15-handguard.thin_slot_row_d_y}, harvested
The R-ONE's row, where its side views have the opening's own rim.
The opening's rim as the R-ONE's side views have it: this handguard's see-through windows match the R-ONE's within 0.012 in, so its openings are taken to stand where the R-ONE's do, each down the middle of its own face.
What shows through both walls isn't the opening: the faces slant, and the far side's rim hides part of the near's. The R-ONE's rows were read both ways; this handguard's see-through windows stand within 0.012 in of the R-ONE's, row for row (0.565, 0.773, 1.587 and 1.805 below the rail's top here; 0.553, 0.770, 1.598 and 1.813 there).
The lower outer row of thin slots, its height above the bore-0.635 in ± 0.02 in -16.1 mmConflictWorked out: {aero-r-one-15-handguard.thin_slot_row_e_y}
Photo -0.592 in ± 0.02 in
Sportsman's Warehouse's 1200 px copies of Aero's two gallery views of APRA500105A: its right side and its left, harvested
Scale: the view's own eight rail slots, four at each end, on one grid of the standard's pitch (std.picatinny.slot_pitch, .394) 36 pitches from the first to the last: a quadratic from pixels to inches through their centres, each within 0.002 in of it (74.7 px/in at the rear slot rising to 76.5 at the front in the right view, 75.5 falling to 74.8 in the left); down the picture at the scale of the middle of the rail. Read by the middle of the row's see-through window, 1.804 below the teeth's tops in both views, from the rail's top at rail_top_above_bore
Worked out -0.635 in ± 0.02 in used
{aero-r-one-15-handguard.thin_slot_row_e_y}, harvested
The R-ONE's row, where its side views have the opening's own rim.
The opening's rim as the R-ONE's side views have it: this handguard's see-through windows match the R-ONE's within 0.012 in, so its openings are taken to stand where the R-ONE's do, each down the middle of its own face.
photo and r-one-opening differ by 0.043 in beyond what each states it is good to.
What shows through both walls isn't the opening: the faces slant, and the far side's rim hides part of the near's. The R-ONE's rows were read both ways; this handguard's see-through windows stand within 0.012 in of the R-ONE's, row for row (0.565, 0.773, 1.587 and 1.805 below the rail's top here; 0.553, 0.770, 1.598 and 1.813 there).
The room inside its side faces, from the face in to the barrel (what an M-LOK accessory's nuts may take)No value yetMissingNo source yet
It depends on the barrel under it, another part: no figure.
What it goes with
By the way it mounts, and the figures each part on file states: a part whose figures say it doesn't fit is left out, and one whose fit can't be checked from what is published is marked. A check is against published figures, not a guarantee.
Handguard mount
Picatinny rail (MIL-STD-1913)
- Red dot mounts
- Aimpoint Duty RDS One-piece TNP Mount, 30 mm, Aimpoint LRP (Lever Release Picatinny) Mount with 39 mm Spacer, for Micro, Aimpoint One-piece Torsion Nut Mount and Spacer, 39 mm, Geissele Super Precision T1 Mount - 1.93" Height, Geissele Super Precision T1 Mount - Absolute Co-Witness, Geissele Super Precision T1 Mount - Lower 1/3 Co-Witness, Holosun 1.63 in lower 1/3 co-witness pedestal mount (HS-MOUNT-AR-RISER-ARO), Midwest Industries MK2 QD T2 Aimpoint Mount, Low, Midwest Industries MK2 QD T2 Aimpoint Mount, Lower 1/3 Cowitness, Midwest Industries MK2 QD T2 Aimpoint Mount, NV 2.26 in Height, Reptilia DOT MOUNT FOR AIMPOINT® MICRO – 1.93″ HEIGHT, Reptilia DOT MOUNT FOR AIMPOINT® MICRO – LOWER 1/3 (39MM HEIGHT), Scalarworks LEAP/01 Aimpoint Micro T-2 quick-detach mount, 1.42 in, Scalarworks LEAP/01 Aimpoint Micro T-2 quick-detach mount, 1.57 in, Scalarworks LEAP/01 Aimpoint Micro T-2 quick-detach mount, 1.93 in, Scalarworks LEAP/02 Aimpoint Micro T-2 quick-detach mount, 2.26 in, SIG Sauer M1913 I-BEAM Mount, 1.41 in absolute co-witness, SIG Sauer See-Through Riser Mount, 1.41 in absolute co-witness, Unity Tactical FAST Micro Mount, 2.26 in optical centerline
- Optics
- Aimpoint Patrol Rifle Optic (PRO) Red Dot Reflex Sight - QRP2 Mount, EOTECH HWS EXPS3 holographic weapon sight, 1-Dot Speed Ring, Holosun HS510C Open Reflex MRS Solar QD Mount
- Lights
- Olight Baldr S BL, Streamlight ProTac Rail Mount HL-X, SureFire Mini Scout Light Pro, SureFire Scout Light Pro Dual Fuel
- Backup sights
- Daniel Defense A1.5 Fixed Rear Sight, Daniel Defense Rail Mounted Fixed Front Sight, Magpul MBUS 3 Sight – Front, Magpul MBUS 3 Sight – Rear, Magpul MBUS Pro Sight – Front, Magpul MBUS Pro Sight – Rear
- Magnifiers
- EOTECH G33 Magnifier, STS Mount, EOTECH G45 Magnifier, STS Mount, Holosun HM3X 3× magnifier with flip mount
- Scope mounts
- Primary Arms Deluxe AR-15 Scope Mount - 30mm, Primary Arms SLx Cantilever 30mm Mount - 1.5", Reptilia AUS™ MOUNT - 30MM DIAMETER - 39MM HEIGHT, Scalarworks LEAP/08 quick-detach scope mount, 30 mm, 1.57 in, SIG SAUER ALPHA-MSR scope mount, 30 mm, Vortex Sport Cantilever 30mm Mount
M-LOK
- Hand stops
- BCM KAG (M-LOK® Compatible*) (fit unchecked), Magpul M-LOK Hand Stop (fit unchecked), Magpul M-LOK Index Panel (fit unchecked)
- Vertical grips
- BCM Vertical Grip Mod 3 (M-LOK® Compatible*) (fit unchecked), Magpul M-LOK MVG vertical grip (fit unchecked)
- Lights
- Cloud Defensive REIN (fit unchecked), Streamlight ProTac Rail Mount HL-X (fit unchecked), SureFire Mini Scout Light Pro (fit unchecked), SureFire Scout Light Pro Dual Fuel (fit unchecked)
- Rail sections
- Magpul M-LOK® Aluminum Rail, 3 Slots (fit unchecked), Magpul M-LOK® Aluminum Rail, 5 Slots (fit unchecked), Magpul M-LOK® Aluminum Rail, 7 Slots (fit unchecked), Magpul M-LOK® Aluminum Rail, 9 Slots (fit unchecked), Magpul M-LOK® Polymer Rail, 11 Slots (fit unchecked), Magpul M-LOK® Polymer Rail, 3 Slots (fit unchecked), Magpul M-LOK® Polymer Rail, 5 Slots (fit unchecked), Magpul M-LOK® Polymer Rail, 7 Slots (fit unchecked), Magpul M-LOK® Polymer Rail, 9 Slots (fit unchecked)
- Adapter plates
- Magpul M-LOK Hand Stop MOE Adapter (fit unchecked)
- Sling mounts
- Magpul M-LOK QD Sling Mount (fit unchecked)
- Rail covers
- Magpul M-LOK Rail Cover Type 2 (fit unchecked)
Prices on file
Each seller's latest reading of its own page: before tax and shipping, and not a quote. The pages are read again every night.
- Sportsman's Warehouse $204.99 Anodized Black Nov 21, 2026, in stock that day
- Aero Precision $225.00 Anodized Black Nov 21, 2026, stock not said
- Aero Precision $225.00 OD Green Anodized Nov 21, 2026, stock not said
- Aero Precision $225.00 Kodiak Brown Anodized Nov 21, 2026, stock not said
- Aero Precision $245.00 Sniper Grey Cerakote Nov 21, 2026, stock not said
- Aero Precision $245.00 OD Green Cerakote Nov 21, 2026, stock not said
- KYGUNCO $175.99 Anodized Black Nov 21, 2026, out of stock that day