Backup sight
Magpul MBUS 3 Sight – Rear
Magpul's MBUS 3 rear sight: a polymer folding backup sight for a Picatinny rail, with a spring-loaded release on the base, tool-less windage and two apertures on an arm that turns over. Black, FDE, ODG.

- Weight
- 1.06 oz ± 0.018 oz Confirmedpublished: Magpul, MBUS 3 Sight – Rear (MAG1167), Technical Specifications, the maker, read Oct 5, 2026
- Lowest price
- $37.99 at KYGUNCO, read Nov 21, 2026 (Black)
- Maker's number
- MAG1167
- Colours
- Black, FDE, ODG
- Drawn as
- modelled
- Maker's page
- magpul.com
In “Drop-in 16 in, Stealth Gray on BCM's MK2 lower”, a build on the start page, as it is.
Its figures
Every figure the site draws and checks it by, with where it came from. Open one for each source's reading, and why one is used where they differ.
Length along the rail (folded, where it folds)2.35 in ± 0.02 in 59.7 mmConflictPhoto: US D1,010,057 S (Magpul, 'Gun sight'), FIG. 2 left elevation, deployed; the patent office's copy, page 4, 300 dpi
Photo 2.35 in ± 0.02 in used
US D1,010,057 S (Magpul, 'Gun sight'), FIG. 2 left elevation, deployed; the patent office's copy, page 4, 300 dpi, harvested
Scale: the figures' one scale, set on FIG. 4 by Magpul's width at the widest point (.width, 1.38 in over 1235 px: 894.9 px/in); the aperture's height (.sight_line_above_rail) gives 899.3. Read by the arm turned flat about its hinge: the hinge's axis (the centre of the round lower end of the arm's side panel, a circle fitted to it: 1522.7, 2044.9) to the base's front end (731, the stroke's centre): 792 px; and to the arm's far end, the wings' rear top corner (731.5 up the sheet): 1313 px. 2105 px. ± covers the two published sizes' 0.5% and the strokes
Photo 2.32 in ± 0.03 in
Impact Guns SSI133213_B: Magpul's photo of the olive sight stowed on a flat-top receiver, right side, the rail's teeth ahead of it; 1500 x 1500, harvested
Scale: the rail's two teeth in frame: their near corners 142 px apart and their far corners 136 (std.picatinny.slot_pitch): the lens about 20 in away, 360 px/in in the rail's near edge's plane and 362.6 in the plane of the sight's right side. Read by the arm's far end (u 361, rows 560 to 570) to the base's front end (u 1201, row 590), both on the side nearest the lens: 840 px; ± 4 px and the lens's distance
Published “Length 2.43 inches”
T.REX ARMS, Magpul MBUS 3 Sight - Rear, Technical Specifications (source of the figures unstated), a seller, read Oct 5, 2026 the page, harvested Oct 5, 2026
Two readings that share nothing agree within their ±: the patent's elevation at the scale Magpul's own two sizes set, and Magpul's photo of it stowed on a rail by the rail's teeth. The seller's table doesn't say what its length is measured to or where it is from, and is 0.08 in more than both; Magpul states no length.
patent and trex differ by 0.08 in beyond what each states it is good to.
photo-stowed and trex differ by 0.11 in beyond what each states it is good to.
Stowed: the base's front end to the far end of the arm lying behind it. Standing it is 1.18 in along the rail (the patent's side elevation).
Width1.38 in ± 0.005 in 35.1 mmConflictPublished: Magpul, MBUS 3 Sight – Rear (MAG1167), feature block, the maker, read Oct 5, 2026
Published “0.55” high when folded and 1.38” wide at widest point” used
Magpul, MBUS 3 Sight – Rear (MAG1167), feature block, the maker, read Oct 5, 2026 the page, harvested Oct 5, 2026
Published “this AR-15 iron sight folds down to just .44" high and 1.15" wide so it sits on slimmer rails without overhanging”
Primary Arms, Magpul MBUS 3 Flip Up AR-15 Iron Sight - Rear - Olive Drab Green (MAG1167-ODG), a seller, read Oct 5, 2026 the page, harvested Oct 5, 2026
The maker's current page, and the patent's rear elevation bears it out: scaled by the aperture's height alone it is 1.373 in from the clamp's boss to the knob's end. The older figure is still on eight sellers' pages; on the patent's figures 1.15 to 1.17 in is the base across its side walls, without the knob and the clamp's boss.
magpul and primary-arms differ by 0.23 in beyond what each states it is good to.
At the widest point: the clamp's boss on the left to the windage knob's end on the right. The wings are 0.97 in across, the base 1.17.
Height above the rail's top, folded (a fixed sight: its height)0.55 in ± 0.005 in 14 mmConflictPublished: Magpul, MBUS 3 Sight – Rear (MAG1167), Technical Specifications, the maker, read Oct 5, 2026
Published “Height above rail, stowed ~0.55 in.” used
Magpul, MBUS 3 Sight – Rear (MAG1167), Technical Specifications, the maker, read Oct 5, 2026 the page, harvested Oct 5, 2026
Published “this AR-15 iron sight folds down to just .44" high and 1.15" wide so it sits on slimmer rails without overhanging”
Primary Arms, Magpul MBUS 3 Flip Up AR-15 Iron Sight - Rear - Olive Drab Green (MAG1167-ODG), a seller, read Oct 5, 2026 the page, harvested Oct 5, 2026
Photo 0.52 in ± 0.02 in
US D1,010,057 S (Magpul, 'Gun sight'), FIG. 2 left elevation, deployed; the patent office's copy, page 4, 300 dpi, harvested
Scale: the figures' one scale (.width over FIG. 4's 1235 px: 894.9 px/in). Read by the arm turned flat about its hinge: the hinge's axis stands 204.6 px above the rail's top (FIG. 4's channel ceiling, 56 rows down on this sheet: 2249.5) and the windage knob's collar is 520 px across on that axis: its rim 464.6 px above the rail. The arm's own top is then 0.44 in above the rail and the base's 0.44
The maker's own figure, measured from the rail's top ("Height above rail, stowed"), and stated as approximate. The patent's figures, with the arm laid flat, put the knob's rim at 0.52 in and the body at 0.44, and Magpul's photo of it stowed on a rail reads the same two (0.51 and 0.45): the older 0.44 that eight sellers still print fits the body without the knob.
magpul and primary-arms differ by 0.11 in beyond what each states it is good to.
magpul and patent differ by 0.03 in beyond what each states it is good to.
primary-arms and patent differ by 0.08 in beyond what each states it is good to.
From the rail's top to its highest point stowed, the windage knob's rim. T.REX ARMS adds "0.63 inches (total)", which on the patent's figures would be 0.77 (the clamp reaches 0.25 in below the rail's top).
Height above the rail's top, standing1.696 in ± 0.02 in 43.1 mmProvisionalWorked out: {.overall_height_up} - {.clamp_below_rail}
Worked out 1.696 in ± 0.02 in used
{.overall_height_up} - {.clamp_below_rail}, harvested
To the wings' tops. Not published: the patent's rear elevation, the clamp's lower edge to the wings' tops, less the clamp's reach below the rail's top.
Sight line above the rail's top (the aperture's centre, the post's tip)1.42 in ± 0.005 in 36.1 mmConflictPublished: Magpul, MBUS 3 Sight – Rear (MAG1167), Technical Specifications, Other Specs, the maker, read Oct 5, 2026
Published “Center of aperture to top of rail: 1.42 in.” used
Magpul, MBUS 3 Sight – Rear (MAG1167), Technical Specifications, Other Specs, the maker, read Oct 5, 2026 the page, harvested Oct 5, 2026
Published “Centerline Height 1.41 inches”
T.REX ARMS, Magpul MBUS 3 Sight - Rear, Technical Specifications (source of the figures unstated), a seller, read Oct 5, 2026 the page, harvested Oct 5, 2026
Photo 1.427 in ± 0.01 in
US D1,010,057 S (Magpul, 'Gun sight'), FIG. 4 rear elevation, deployed; the patent office's copy, page 6, 300 dpi, harvested
Scale: .width, 1.38 in, over the figure's 1235 px between the stroke centres of the clamp's boss and the knob's end: 894.9 px/in. Read by the channel's ceiling (the broken line at row 2193.5, columns 1000 to 1560) to the small aperture's centre (the centroid of the circle its strokes close: 1237.5, 916.5): 1277 px
The maker's own figure, and it says what it is measured to. The seller's is 0.01 in less; the patent's figure, scaled by the width, is 0.007 in more.
trex and patent differ by 0.017 in beyond what each states it is good to.
The small aperture standing. The aperture arm turns over about the windage screw to bring the large aperture up ("flip the aperture arm 180-degrees", the instruction sheet); on the patent's figure the two are 302 and 307 px either side of the screw's axis, so the large one stands within 0.006 in of the same height.
Clamp's length along the rail0.686 in ± 0.015 in 17.4 mmProvisionalPhoto: US D1,010,057 S (Magpul, 'Gun sight'), FIG. 2 left elevation, deployed; the patent office's copy, page 4, 300 dpi
Photo 0.686 in ± 0.015 in used
US D1,010,057 S (Magpul, 'Gun sight'), FIG. 2 left elevation, deployed; the patent office's copy, page 4, 300 dpi, harvested
Scale: scale from magpul-mbus-3-rear.overall_height_up = 1.949 in (y-extent 1744 px → 894.8 px/in). Read by −x_min in y [0.02, 0.15] of the traced outline (tools/trace.py); the base's front end to its rear end over the rows where its jaws are on the rail's sides (0.1 to 0.23 in below the rail's top)
The base's two ends where it is on the rail. Not published; from the patent's side elevation.
Overall height standing (the clamp's lower edge to the wings' tops)1.949 in ± 0.01 in 49.5 mmProvisionalPhoto: US D1,010,057 S (Magpul, 'Gun sight'), FIG. 4 rear elevation, deployed; the patent office's copy, page 6, 300 dpi
Photo 1.949 in ± 0.01 in used
US D1,010,057 S (Magpul, 'Gun sight'), FIG. 4 rear elevation, deployed; the patent office's copy, page 6, 300 dpi, harvested
Scale: scale from magpul-mbus-3-rear.width = 1.38 in (x-extent 1235 px → 894.9 px/in). Read by height of the traced outline (tools/trace.py); the rear elevation's overall height, the clamp's lower edge to the wings' tops, at the scale Magpul's width sets
What the patent's elevations are tall: FIG. 2 to FIG. 5 all 1748 px, which is how the side elevation takes the rear elevation's scale.
Clamp's lower edge below the rail's top0.253 in ± 0.01 in 6.4 mmProvisionalPhoto: US D1,010,057 S (Magpul, 'Gun sight'), FIG. 4 rear elevation, deployed; the patent office's copy, page 6, 300 dpi
Photo 0.253 in ± 0.01 in used
US D1,010,057 S (Magpul, 'Gun sight'), FIG. 4 rear elevation, deployed; the patent office's copy, page 6, 300 dpi, harvested
Scale: .width, 1.38 in, over the figure's 1235 px: 894.9 px/in. Read by the channel's ceiling (the broken line at row 2193.5) to the jaws' lower edge (the stroke at rows 2418 to 2421): 226 px
The rail's top is the ceiling of the channel the patent draws in broken lines: 0.89 in wide over the rail's 0.835 (std.picatinny.top_width), hooked under its 45° faces to 0.70 in. In Magpul's photo of it on a receiver the base reaches about as far down the rail's side.
Clamp's lower edge in the sight's frame (y, the rail's top is 0)-0.253 in ± 0.01 in -6.4 mmProvisionalWorked out: -{.clamp_below_rail}
Worked out -0.253 in ± 0.01 in used
-{.clamp_below_rail}, harvested
Where the traced outlines' lower edge sits in the part frame: the profiles' y offset.
Base's front end ahead of the clamp's middle (the sight frame's x origin)0.343 in ± 0.008 in 8.7 mmProvisionalWorked out: {.clamp_length} / 2
Worked out 0.343 in ± 0.008 in used
{.clamp_length} / 2, harvested
The traced outlines' x origin is the base's front end: the profiles' x offset to the clamp's middle.
Cross bolt's axis behind the base's front end0.292 in ± 0.01 in 7.4 mmProvisionalPhoto: US D1,010,057 S (Magpul, 'Gun sight'), FIG. 2 left elevation, deployed; the patent office's copy, page 4, 300 dpi
Photo 0.292 in ± 0.01 in used
US D1,010,057 S (Magpul, 'Gun sight'), FIG. 2 left elevation, deployed; the patent office's copy, page 4, 300 dpi, harvested
Scale: the figures' one scale (.width over FIG. 4's 1235 px: 894.9 px/in). Read by the base's front end (731) to the centre of the clamp boss's face (a circle fitted to its stroke: 992.6, 2253.9, 308 px across): 261.6 px. The boss's axis is 4 px under the rail's top line
The 10-24 screw that draws the clamp shut crosses the channel at the rail's top and sits in one of the rail's slots (Magpul's underside photo: "Picatinny clamp and shouldered mounting screw"): it is what a slot holds, so the mount's anchor is on its axis. The right elevation's hex socket (FIG. 3, broken lines) is on the same axis.
Clamp screw's hex socket (across its flats)0.125 in ± 0.001 in 3.2 mmConfirmedPublished: Magpul, MBUS Sight - Rear installation instructions (092-0065-A), Step 2: Mount sight, the maker, read Oct 5, 2026
Published “Using a flat head screwdriver or 1/8” hex key, hand tighten the 10-24 Dual-Drive Screw.” used
Magpul, MBUS Sight - Rear installation instructions (092-0065-A), Step 2: Mount sight, the maker, read Oct 5, 2026 the page, harvested Oct 5, 2026
The key's size is the socket's across its flats. The patent's right elevation (FIG. 3) draws the socket in broken lines on the cross screw's axis, about 130 px across its corners: 0.145 in at the figures' scale, 0.126 across the flats.
Aperture arm's bar behind the base's front end (its mid-thickness)1.061 in ± 0.02 in 26.9 mmProvisionalPhoto: US D1,010,057 S (Magpul, 'Gun sight'), FIG. 6 top plan, deployed; the patent office's copy, page 8, 300 dpi
Photo 1.061 in ± 0.02 in used
US D1,010,057 S (Magpul, 'Gun sight'), FIG. 6 top plan, deployed; the patent office's copy, page 8, 300 dpi, harvested
Scale: the figures' one scale (.width over the plan's own 1237 px across: 896.4 px/in). Read by the base's front end (733) to the bar between the wings, seen from above as a strip 1651 to 1717 (the arm's rear face): its middle, 951 px
Where the aperture is along the rail: the bar lies against the arm's rear face, 0.075 in thick.
Small aperture's diameter0.063 in ± 0.0005 in 1.6 mmProvisionalPublished: T.REX ARMS, Magpul MBUS 3 Sight - Rear, Technical Specifications (source of the figures unstated), a seller, read Oct 5, 2026
Published “Aperture Size 0.063 inches (small aperture) 0.19 inches (large aperture)” used
T.REX ARMS, Magpul MBUS 3 Sight - Rear, Technical Specifications (source of the figures unstated), a seller, read Oct 5, 2026 the page, harvested Oct 5, 2026
Magpul states no aperture size. The patent's small circle is 0.071 in across its stroke centres.
Large aperture's diameter0.19 in ± 0.005 in 4.8 mmProvisionalPublished: T.REX ARMS, Magpul MBUS 3 Sight - Rear, Technical Specifications (source of the figures unstated), a seller, read Oct 5, 2026
Published “Aperture Size 0.063 inches (small aperture) 0.19 inches (large aperture)” used
T.REX ARMS, Magpul MBUS 3 Sight - Rear, Technical Specifications (source of the figures unstated), a seller, read Oct 5, 2026 the page, harvested Oct 5, 2026
The patent's large circle is 0.194 in across its stroke centres: the seller's figure and the drawing agree.
What it goes with
By the way it mounts, and the figures each part on file states: a part whose figures say it doesn't fit is left out, and one whose fit can't be checked from what is published is marked. A check is against published figures, not a guarantee.
Picatinny rail (MIL-STD-1913)
- Uppers
- Aero Precision M4E1 Enhanced Upper Receiver Stripped, Aero Precision M4E1 Threaded upper receiver, BCM M4 Upper Receiver Assembly (w/ Laser T-Markings), Expo Arms 7075 Stripped AR-15 Upper Receiver, Geissele Automatics Super Duty Stripped Upper Receiver, Nordic Components 22RB .22 LR upper, 16", Palmetto State Armory AR-15 Stripped Upper Receiver, Panzer Arms AR57 ULT Complete AR-15 Upper Receiver - 5.7x28mm - 12", Panzer Arms AR57 Ultra Light Tactical Complete AR-15 Upper Receiver - 5.7x28mm - 16"
- Handguards
- Aero Precision AR15 10.3" R-ONE M-LOK handguard, Aero Precision AR15 12.7" R-ONE M-LOK handguard, Aero Precision AR15 15" Enhanced M-LOK Handguard, Gen 2, Aero Precision AR15 15" R-ONE M-LOK handguard, Aero Precision AR15 15" S-ONE M-LOK Handguard, Aero Precision AR15 16.6" R-ONE M-LOK handguard, Aero Precision AR15 7.3" R-ONE M-LOK handguard, Aero Precision AR15 9.3" R-ONE M-LOK handguard, BCM MCMR-10 (M-LOK® Compatible* Modular Rail), BCM MCMR-13 (M-LOK® Compatible* Modular Rail), BCM MCMR-15 (M-LOK® Compatible* Modular Rail), Expo Arms Free Float AR-15 Handguard - M-LOK - 15", Geissele Automatics 10.5" Super Modular Rail MK16 M-LOK, Geissele Automatics 13.5" Super Modular Rail MK16 M-LOK, Geissele Automatics 15" Super Modular Rail MK16 M-LOK, MAS Defense 12.62" NERO M-LOK FREE FLOAT, MAS Defense 15" NERO M-LOK FREE FLOAT, MAS Defense 9.87" NERO M-LOK FREE FLOAT, Midwest Industries AR-15/M16 Two Piece Drop-In Handguard, M-LOK® (Carbine), Midwest Industries AR-15/M16 Two Piece Drop-In Handguard, M-LOK® (Mid-Length), Midwest Industries Combat Rail One Piece Free Float Handguard, M-LOK™ (15")
- Frames
- Taurus TX22 Gen 2 frame
- Rail sections
- Magpul M-LOK® Aluminum Rail, 3 Slots, Magpul M-LOK® Aluminum Rail, 5 Slots, Magpul M-LOK® Aluminum Rail, 7 Slots, Magpul M-LOK® Aluminum Rail, 9 Slots, Magpul M-LOK® Polymer Rail, 11 Slots, Magpul M-LOK® Polymer Rail, 3 Slots, Magpul M-LOK® Polymer Rail, 5 Slots, Magpul M-LOK® Polymer Rail, 7 Slots, Magpul M-LOK® Polymer Rail, 9 Slots
Prices on file
Each seller's latest reading of its own page: before tax and shipping, and not a quote. The pages are read again every night.
- KYGUNCO $37.99 Black Nov 21, 2026, in stock that day
- AR15Discounts $46.95 Black Nov 21, 2026, stock not said
- T.REX ARMS $56.95 Black Nov 21, 2026, in stock that day
- T.REX ARMS $56.95 FDE Nov 21, 2026, in stock that day
- Wing Tactical $56.95 Nov 21, 2026, in stock that day
- Midwest Gun Works $56.95 Black Nov 21, 2026, in stock that day
- Mile High Shooting Accessories $56.95 Black Nov 21, 2026, in stock that day
- Dirty Bird Industries $56.95 Black Nov 21, 2026, in stock that day
- AR15Discounts $56.95 FDE Nov 21, 2026, stock not said
- AR15Discounts $56.95 ODG Nov 21, 2026, stock not said
- Primary Arms $56.95 ODG Nov 21, 2026, in stock that day
- Primary Arms $56.95 FDE Nov 21, 2026, in stock that day
- Right To Bear $56.95 FDE Nov 21, 2026, in stock that day
- Impact Guns $56.95 ODG Nov 21, 2026, in stock that day
- GRITR Outdoors $56.95 FDE Nov 21, 2026, in stock that day
- Alexander's Store $56.95 FDE Nov 18, 2026, in stock that day
- Sportsman's Warehouse $56.99 FDE Nov 21, 2026, in stock that day
- Magpul $59.95 Nov 21, 2026, stock not said
- Scheels $59.99 Black Oct 5, 2026, in stock that day
- Rifle Supply $67.49 ODG Nov 21, 2026, in stock that day
- T.REX ARMS $56.95 ODG Nov 21, 2026, out of stock that day
- Midwest Gun Works $56.95 FDE Nov 21, 2026, out of stock that day
- Sportsman's Warehouse $56.99 Black Nov 21, 2026, out of stock that day