Backup sight
Daniel Defense Rail Mounted Fixed Front Sight
Daniel Defense's rail-mounted fixed front sight (Rock & Lock): one piece of 6061-T6 aluminium, hard anodized, for a Picatinny rail by one slotted screw into a self-locking stainless insert; a standard AR-15 front sight post, a glare-reducing serrated rear ramp, concave sides to rest a thumb on a compact light ahead of it. Black; Mil-Spec+ Brown and Tornado Grey in the set with the A1.5 rear.

- Weight
- 1.1 oz Corroboratedpublished: Right to Bear, Daniel Defense Rail Mounted Fixed Sight - Front: Daniel Defense's own description, in the first person, a seller, read Oct 19, 2026
- Lowest price
- $77.00 at Primary Arms, read Nov 21, 2026 (Black)
- Maker's number
- 19-017-04013
- Colours
- Black, Tornado Grey
- Drawn as
- modelled
- Maker's page
- primaryarms.com
In “Aero 5.56 carbine, fitted out”, a build on the start page, in place of its Magpul MBUS Pro Sight – Rear.
Its figures
Every figure the site draws and checks it by, with where it came from. Open one for each source's reading, and why one is used where they differ.
Length along the rail1 in ± 0.03 in 25.4 mmProvisionalPublished: Wing Tactical, Daniel Defense AR-15 Fixed Iron Sights (the set 19-088-09116; its spec list gives each sight), a seller, read Oct 19, 2026
Published “Length: Front: 1" Rear: 1.38"” used
Wing Tactical, Daniel Defense AR-15 Fixed Iron Sights (the set 19-088-09116; its spec list gives each sight), a seller, read Oct 19, 2026 the page, harvested Oct 19, 2026
A whole inch beside the rear's 1.38: the ± is the rounding a two-place row implies elsewhere (its rear is 1.38), not a stated one.
Wing gives a whole inch. Modern Warriors' "1" (2.5cm) long" (the discovery's reading) is no source here: its page answered the harvester 202 with an empty body. The drawing bears the inch out: at this scale the patent's rear view (scaled through the overall height) has the post's blade 0.070 in across, the Army drawing's .072 -.004.
Width1.245 in ± 0.037 in 31.6 mmProvisionalPhoto: US D631,934 S, FIG. 8, the bottom view (the muzzle to the viewer's right, the screw head at the sheet's top: +z up); page 9, 300 dpi
Photo 1.245 in ± 0.037 in used
US D631,934 S, FIG. 8, the bottom view (the muzzle to the viewer's right, the screw head at the sheet's top: +z up); page 9, 300 dpi, harvested
Scale: scale from daniel-defense-fixed-front-sight.length = 1 in (x-extent 1387 px → 1387.0 px/in). Read by height of the traced outline (tools/trace.py); the bottom view's extent across, the feet's outer edges (the screw's head left out), at the length's scale
No page on file states it (Modern Warriors' "1-1⁄8" (2.8cm) wide", the discovery's reading, wasn't served to the harvester). Read on the patent: the bottom view at the length's scale, and the rear view through the overall height (the feet, u 551 to 1903: 1.232).
Height above the rail's top (a fixed sight: to the ears' top)1.425 in ± 0.04 in 36.2 mmProvisionalPhoto: US D631,934 S, FIG. 4, the rear view; the patent office's copy, page 5, 300 dpi
Photo 1.425 in ± 0.04 in used
US D631,934 S, FIG. 4, the rear view; the patent office's copy, page 5, 300 dpi, harvested
Scale: the overall height, the ears' top (row 666) to the feet (row 2487): 1821 px for daniel-defense-fixed-front-sight.height_drawn (1097 px/in at its 1.660). Read by the ears' top (row 666) over the channel's ceiling (row 2229): 1563 px. ± the length's rounding and the drawing's fidelity
No page on file states it (Modern Warriors' "1¾" (4.5cm) high from top of receiver rail to top of sight housing" wasn't served to the harvester, and the patent at the length's scale has the ears 1.425 over the rail: whatever that page measured, it isn't this). Read on the patent's rear view.
Height as the patent draws it (the feet to the crown's top), at the length's scale1.66 in ± 0.05 in 42.2 mmProvisionalPhoto: US D631,934 S (Daniel Defense, 'Front firearm sight'), FIG. 5, the screw side, the muzzle to the viewer's right (the sight's right); the patent office's copy, page 6, 300 dpi
Photo 1.66 in ± 0.05 in used
US D631,934 S (Daniel Defense, 'Front firearm sight'), FIG. 5, the screw side, the muzzle to the viewer's right (the sight's right); the patent office's copy, page 6, 300 dpi, harvested
Scale: scale from daniel-defense-fixed-front-sight.length = 1 in (x-extent 1300 px → 1300.0 px/in). Read by height of the traced outline (tools/trace.py); the jaws' feet to the crown's top in the screw-side elevation, at the length's scale. ± covers the length's rounding (a whole inch) and a design patent's fidelity
What the rear elevation and the model are scaled by, so that the side and the end views of the model are one drawing.
A2 front sight post: the blade's width (square)0.07 in ± 0.002 in 1.8 mmConfirmedStandard: US Army drawing 9349056 (Post, Front Sight), sheet 1 of 1, rev G: the user-supplied TDP scan, PDF page 178 (a copy on file)
Standard 0.07 in ± 0.002 in used
US Army drawing 9349056 (Post, Front Sight), sheet 1 of 1, rev G: the user-supplied TDP scan, PDF page 178 (a copy on file), from the site owner
.072 -.004, 2 places: the middle of its tolerance
A2 front sight post: the blade's height over its flange0.268 in ± 0.005 in 6.8 mmConfirmedStandard: US Army drawing 9349056 (Post, Front Sight), sheet 1 of 1, rev G: the user-supplied TDP scan, PDF page 178 (a copy on file)
Standard 0.268 in ± 0.005 in used
US Army drawing 9349056 (Post, Front Sight), sheet 1 of 1, rev G: the user-supplied TDP scan, PDF page 178 (a copy on file), from the site owner
.273 -.010: the middle of its tolerance
A2 front sight post: the flange (detent disc) across0.364 in ± 0.0015 in 9.3 mmConfirmedStandard: US Army drawing 9349056 (Post, Front Sight), sheet 1 of 1, rev G: the user-supplied TDP scan, PDF page 178 (a copy on file)
Standard 0.3645 in ± 0.0015 in used
US Army drawing 9349056 (Post, Front Sight), sheet 1 of 1, rev G: the user-supplied TDP scan, PDF page 178 (a copy on file), from the site owner
.366 -.003 diameter, with four notches of .0455 R on a .400 diameter
A2 front sight post: the flange's thickness0.06 in ± 0.005 in 1.5 mmConfirmedStandard: US Army drawing 9349056 (Post, Front Sight), sheet 1 of 1, rev G: the user-supplied TDP scan, PDF page 178 (a copy on file)
Standard 0.06 in ± 0.005 in used
US Army drawing 9349056 (Post, Front Sight), sheet 1 of 1, rev G: the user-supplied TDP scan, PDF page 178 (a copy on file), from the site owner
.065 -.010
A2 front sight post: the blade's round root over the flange0.165 in ± 0.005 in 4.2 mmConfirmedStandard: US Army drawing 9349056 (Post, Front Sight), sheet 1 of 1, rev G: the user-supplied TDP scan, PDF page 178 (a copy on file)
Standard 0.165 in ± 0.005 in used
US Army drawing 9349056 (Post, Front Sight), sheet 1 of 1, rev G: the user-supplied TDP scan, PDF page 178 (a copy on file), from the site owner
.170 -.010 diameter, the 4 fillets of .13 R from the square blade down to it, .082 -.010 tall over the flange
A2 front sight post: the fillets' height over the flange0.077 in ± 0.005 in 2 mmConfirmedStandard: US Army drawing 9349056 (Post, Front Sight), sheet 1 of 1, rev G: the user-supplied TDP scan, PDF page 178 (a copy on file)
Standard 0.077 in ± 0.005 in used
US Army drawing 9349056 (Post, Front Sight), sheet 1 of 1, rev G: the user-supplied TDP scan, PDF page 178 (a copy on file), from the site owner
.082 -.010
Sight line above the rail's top (the post's tip)1.36 in ± 0.005 in 34.5 mmCorroboratedPublished: Wing Tactical, Daniel Defense AR-15 Fixed Iron Sights (the set 19-088-09116; its spec list gives each sight), a seller, read Oct 19, 2026
Published “Center Height Over Rail: Front: 1.36" Rear: 1.54"” used
Wing Tactical, Daniel Defense AR-15 Fixed Iron Sights (the set 19-088-09116; its spec list gives each sight), a seller, read Oct 19, 2026 the page, harvested Oct 19, 2026
Photo 1.33 in ± 0.04 in
US D631,934 S, FIG. 4, the rear view; the patent office's copy, page 5, 300 dpi, harvested
Scale: the overall height, the ears' top (row 666) to the feet (row 2487): 1821 px for daniel-defense-fixed-front-sight.height_drawn (1097 px/in at its 1.660). Read by the post's flat tip (row 769.5, column 1222) over the channel's ceiling (row 2229): 1459.5 px. ± the length's rounding, the drawing's fidelity and the post's setting
A published figure for the post's tip, as the patents' heights read it; the drawing's 1.330 is the post at one setting and inside its ±. The rear's aperture is at 1.363: the pair co-witness.
The A2 post screws up and down in the sight ("Uses standard AR-15 front sight posts", Primary Arms): its tip's height is a setting. Wing's "Center Height Over Rail: Front: 1.36"" is read as the tip: the patent, scaled by the length alone, draws it at 1.330 and the rear sight's aperture centre at 1.363, and the rear's "1.54" in the same row is that aperture's top.
Clamp's length along the rail1 in ± 0.03 in 25.4 mmProvisionalWorked out: {.length}
Worked out 1 in ± 0.03 in used
{.length}, harvested
The base sits on the rail its whole length.
Clamp's reach below the rail's top (the jaws' feet)0.235 in ± 0.01 in 6 mmProvisionalPhoto: US D631,934 S, FIG. 4, the rear view; the patent office's copy, page 5, 300 dpi
Photo 0.235 in ± 0.01 in used
US D631,934 S, FIG. 4, the rear view; the patent office's copy, page 5, 300 dpi, harvested
Scale: the overall height, the ears' top (row 666) to the feet (row 2487): 1821 px for daniel-defense-fixed-front-sight.height_drawn (1097 px/in at its 1.660). Read by the channel's ceiling (row 2229) to the feet (row 2487): 258 px
Base's front face ahead of the clamp's middle (x)0.5 in ± 0.015 in 12.7 mmProvisionalWorked out: {.length} / 2
Worked out 0.5 in ± 0.015 in used
{.length} / 2, harvested
Clamp's bottom in the sight's frame (y, the rail's top is 0)-0.235 in ± 0.01 in -6 mmProvisionalWorked out: -{.clamp_below_rail}
Worked out -0.235 in ± 0.01 in used
-{.clamp_below_rail}, harvested
Clamp screw's axis behind the front face0.499 in ± 0.015 in 12.7 mmProvisionalPhoto: US D631,934 S, FIG. 5, the screw side, the muzzle to the viewer's right; page 6, 300 dpi
Photo 0.499 in ± 0.015 in used
US D631,934 S, FIG. 5, the screw side, the muzzle to the viewer's right; page 6, 300 dpi, harvested
Scale: daniel-defense-fixed-front-sight.length = 1 in: the front face (u 1929.5) to the base's rear end (u 637.5), 1292 px (1292 px/in). Read by the screw head's centre (u 1283.5: columns 1038 and 1529 along row 2485) behind the front face: 646 px. The insert's in the other side's elevation (FIG. 6) is 0.49 behind its front face
Daniel Defense (Sportsman's): "it secures with a slotted fastener threaded into a self-locking stainless steel thread insert": one screw across the channel, in a rail slot.
Clamp screw's axis below the rail's top0.025 in ± 0.01 in 0.6 mmProvisionalPhoto: US D631,934 S, FIG. 5, the screw side, the muzzle to the viewer's right; page 6, 300 dpi
Photo 0.025 in ± 0.01 in used
US D631,934 S, FIG. 5, the screw side, the muzzle to the viewer's right; page 6, 300 dpi, harvested
Scale: daniel-defense-fixed-front-sight.length = 1 in: the front face (u 1929.5) to the base's rear end (u 637.5), 1292 px (1292 px/in). Read by the head's centre (v 2486: rows 2241.5 and 2730 down column 1300) over the feet (v 2759), 0.211 in, less clamp_below_rail
Clamp screw's head0.38 in ± 0.015 in 9.7 mmProvisionalPhoto: US D631,934 S, FIG. 5, the screw side, the muzzle to the viewer's right; page 6, 300 dpi
Photo 0.38 in ± 0.015 in used
US D631,934 S, FIG. 5, the screw side, the muzzle to the viewer's right; page 6, 300 dpi, harvested
Scale: daniel-defense-fixed-front-sight.length = 1 in: the front face (u 1929.5) to the base's rear end (u 637.5), 1292 px (1292 px/in). Read by the head's outer circle, 491 px across and 488.5 down
Clamp screw's head beyond the right foot0.032 in ± 0.006 in 0.8 mmProvisionalPhoto: US D631,934 S, FIG. 4, the rear view; the patent office's copy, page 5, 300 dpi
Photo 0.032 in ± 0.006 in used
US D631,934 S, FIG. 4, the rear view; the patent office's copy, page 5, 300 dpi, harvested
Scale: the overall height, the ears' top (row 666) to the feet (row 2487): 1821 px for daniel-defense-fixed-front-sight.height_drawn (1097 px/in at its 1.660). Read by the head's outer face (u 1938) beyond the foot's (u 1903): 35 px
Clamp screw's shank0.19 in ± 0.02 in 4.8 mmProvisionalWorked out: An assumption for the drawing, not a reading: no page names the screw; the rear view shows its thread across the channel under the ceiling and the side view its axis 0.025 under the rail's top, a shank that lies in a rail slot (0.206 in wide).
Worked out 0.19 in ± 0.02 in used
An assumption for the drawing, not a reading: no page names the screw; the rear view shows its thread across the channel under the ceiling and the side view its axis 0.025 under the rail's top, a shank that lies in a rail slot (0.206 in wide)., harvested
Thread insert's rim across0.205 in ± 0.02 in 5.2 mmProvisionalPhoto: US D631,934 S, FIG. 6, the insert side; page 7, 300 dpi
Photo 0.205 in ± 0.02 in used
US D631,934 S, FIG. 6, the insert side; page 7, 300 dpi, harvested
Scale: its length taken as FIG. 5's (1292 px/in): the two elevations are drawn alike. Read by the insert's outer ring along row 2380 (u 1235.5 and 1500.5): 265 px; its centre 0.49 in behind the front face (u 731.5)
The feet's inner faces from the middle (under the rail's head)0.447 in ± 0.01 in 11.4 mmProvisionalPhoto: US D631,934 S, FIG. 4, the rear view; the patent office's copy, page 5, 300 dpi
Photo 0.447 in ± 0.01 in used
US D631,934 S, FIG. 4, the rear view; the patent office's copy, page 5, 300 dpi, harvested
Scale: the overall height, the ears' top (row 666) to the feet (row 2487): 1821 px for daniel-defense-fixed-front-sight.height_drawn (1097 px/in at its 1.660). Read by the feet's inner faces (u 735 and 1716.5): 981.5 px apart
The tower's width under the ears0.548 in ± 0.01 in 13.9 mmProvisionalPhoto: US D631,934 S, FIG. 4, the rear view; the patent office's copy, page 5, 300 dpi
Photo 0.548 in ± 0.01 in used
US D631,934 S, FIG. 4, the rear view; the patent office's copy, page 5, 300 dpi, harvested
Scale: the overall height, the ears' top (row 666) to the feet (row 2487): 1821 px for daniel-defense-fixed-front-sight.height_drawn (1097 px/in at its 1.660). Read by its faces (u 925 and 1526): 601 px
The base's two slits, each across0.061 in ± 0.006 in 1.5 mmProvisionalPhoto: US D631,934 S, FIG. 4, the rear view; the patent office's copy, page 5, 300 dpi
Photo 0.061 in ± 0.006 in used
US D631,934 S, FIG. 4, the rear view; the patent office's copy, page 5, 300 dpi, harvested
Scale: the overall height, the ears' top (row 666) to the feet (row 2487): 1821 px for daniel-defense-fixed-front-sight.height_drawn (1097 px/in at its 1.660). Read by the walls of each (u 994 to 1060, 1391 to 1459): 66 and 68 px
Two vertical slits in the base either side of the middle, from the channel's ceiling up (the patent's front and rear views; Primary Arms' end-on photos): the screw draws the base onto the rail.
The slits' middles from the sight's middle0.181 in ± 0.006 in 4.6 mmProvisionalPhoto: US D631,934 S, FIG. 4, the rear view; the patent office's copy, page 5, 300 dpi
Photo 0.181 in ± 0.006 in used
US D631,934 S, FIG. 4, the rear view; the patent office's copy, page 5, 300 dpi, harvested
Scale: the overall height, the ears' top (row 666) to the feet (row 2487): 1821 px for daniel-defense-fixed-front-sight.height_drawn (1097 px/in at its 1.660). Read by the slits' middles (u 1027, 1425) from the middle between the feet (u 1226.5): 199.5 and 198.5 px
The slits' round tops above the rail0.5 in ± 0.01 in 12.7 mmProvisionalPhoto: US D631,934 S, FIG. 4, the rear view; the patent office's copy, page 5, 300 dpi
Photo 0.5 in ± 0.01 in used
US D631,934 S, FIG. 4, the rear view; the patent office's copy, page 5, 300 dpi, harvested
Scale: the overall height, the ears' top (row 666) to the feet (row 2487): 1821 px for daniel-defense-fixed-front-sight.height_drawn (1097 px/in at its 1.660). Read by the slits' tops (row 1680) over the ceiling (row 2229): 549 px
The floor between the ears the post stands up from, above the rail1.073 in ± 0.01 in 27.3 mmProvisionalPhoto: US D631,934 S, FIG. 4, the rear view; the patent office's copy, page 5, 300 dpi
Photo 1.073 in ± 0.01 in used
US D631,934 S, FIG. 4, the rear view; the patent office's copy, page 5, 300 dpi, harvested
Scale: the overall height, the ears' top (row 666) to the feet (row 2487): 1821 px for daniel-defense-fixed-front-sight.height_drawn (1097 px/in at its 1.660). Read by the U's bottom between the ears (row 1052, column 1222) over the ceiling (row 2229): 1177 px. The post stands 0.258 above it as drawn (its blade and fillets .268 over its flange: the flange just under the floor)
The post's axis behind the front face0.325 in ± 0.01 in 8.3 mmProvisionalPhoto: US D631,934 S, FIG. 7, the top view; page 8, 300 dpi
Photo 0.325 in ± 0.01 in used
US D631,934 S, FIG. 7, the top view; page 8, 300 dpi, harvested
Scale: its own length, the rear end (u 619) to the front face (u 1975.5), 1356.5 px for daniel-defense-fixed-front-sight.length (1 in); the post's square blade in it is 95.5 px (u 1487 to 1582.5): 0.070 in, the Army drawing's .072 -.004. Read by the blade's middle (u 1535) behind the front face: 440.5 px
A2 front sight post: the flange's four notches, their radius0.045 in ± 0.0025 in 1.2 mmConfirmedStandard: US Army drawing 9349056 (Post, Front Sight), sheet 1 of 1, rev G: the user-supplied TDP scan, PDF page 178 (a copy on file)
Standard 0.0455 in ± 0.0025 in used
US Army drawing 9349056 (Post, Front Sight), sheet 1 of 1, rev G: the user-supplied TDP scan, PDF page 178 (a copy on file), from the site owner
.0455 +.0025 R, 4 radii equally spaced
A2 front sight post: the circle the notches' centres lie on0.4 in ± 0.0005 in 10.2 mmConfirmedStandard: US Army drawing 9349056 (Post, Front Sight), sheet 1 of 1, rev G: the user-supplied TDP scan, PDF page 178 (a copy on file)
Standard 0.4 in ± 0.0005 in used
US Army drawing 9349056 (Post, Front Sight), sheet 1 of 1, rev G: the user-supplied TDP scan, PDF page 178 (a copy on file), from the site owner
the boxed (basic) .400 diameter
What it goes with
By the way it mounts, and the figures each part on file states: a part whose figures say it doesn't fit is left out, and one whose fit can't be checked from what is published is marked. A check is against published figures, not a guarantee.
Picatinny rail (MIL-STD-1913)
- Uppers
- Aero Precision M4E1 Enhanced Upper Receiver Stripped, Aero Precision M4E1 Threaded upper receiver, BCM M4 Upper Receiver Assembly (w/ Laser T-Markings), Expo Arms 7075 Stripped AR-15 Upper Receiver, Geissele Automatics Super Duty Stripped Upper Receiver, Nordic Components 22RB .22 LR upper, 16", Palmetto State Armory AR-15 Stripped Upper Receiver, Panzer Arms AR57 ULT Complete AR-15 Upper Receiver - 5.7x28mm - 12", Panzer Arms AR57 Ultra Light Tactical Complete AR-15 Upper Receiver - 5.7x28mm - 16"
- Handguards
- Aero Precision AR15 10.3" R-ONE M-LOK handguard, Aero Precision AR15 12.7" R-ONE M-LOK handguard, Aero Precision AR15 15" Enhanced M-LOK Handguard, Gen 2, Aero Precision AR15 15" R-ONE M-LOK handguard, Aero Precision AR15 15" S-ONE M-LOK Handguard, Aero Precision AR15 16.6" R-ONE M-LOK handguard, Aero Precision AR15 7.3" R-ONE M-LOK handguard, Aero Precision AR15 9.3" R-ONE M-LOK handguard, BCM MCMR-10 (M-LOK® Compatible* Modular Rail), BCM MCMR-13 (M-LOK® Compatible* Modular Rail), BCM MCMR-15 (M-LOK® Compatible* Modular Rail), Expo Arms Free Float AR-15 Handguard - M-LOK - 15", Geissele Automatics 10.5" Super Modular Rail MK16 M-LOK, Geissele Automatics 13.5" Super Modular Rail MK16 M-LOK, Geissele Automatics 15" Super Modular Rail MK16 M-LOK, MAS Defense 12.62" NERO M-LOK FREE FLOAT, MAS Defense 15" NERO M-LOK FREE FLOAT, MAS Defense 9.87" NERO M-LOK FREE FLOAT, Midwest Industries AR-15/M16 Two Piece Drop-In Handguard, M-LOK® (Carbine), Midwest Industries AR-15/M16 Two Piece Drop-In Handguard, M-LOK® (Mid-Length), Midwest Industries Combat Rail One Piece Free Float Handguard, M-LOK™ (15")
- Frames
- Taurus TX22 Gen 2 frame
- Rail sections
- Magpul M-LOK® Aluminum Rail, 3 Slots, Magpul M-LOK® Aluminum Rail, 5 Slots, Magpul M-LOK® Aluminum Rail, 7 Slots, Magpul M-LOK® Aluminum Rail, 9 Slots, Magpul M-LOK® Polymer Rail, 11 Slots, Magpul M-LOK® Polymer Rail, 3 Slots, Magpul M-LOK® Polymer Rail, 5 Slots, Magpul M-LOK® Polymer Rail, 7 Slots, Magpul M-LOK® Polymer Rail, 9 Slots
Sight and magnifier
Prices on file
Each seller's latest reading of its own page: before tax and shipping, and not a quote. The pages are read again every night.
- Primary Arms $77.00 Black Nov 21, 2026, in stock that day
- GRITR Sports $81.00 Black Nov 21, 2026, in stock that day
- Right To Bear $82.00 Black Nov 21, 2026, in stock that day
- Sportsman's Warehouse $74.99 Black Nov 21, 2026, out of stock that day