Rail section
Magpul M-LOK® Polymer Rail, 11 Slots
A 11-slot Picatinny rail in Magpul's polymer that bolts straight to a hand guard's M-LOK slots, for a light, a grip or another rail-mounted accessory. Magpul: "Our polymer rail segment attaches to any M-LOK interface for a 11-slot Picatinny mount for lights, vertical grips, or other 1913 rail compatible accessories." It has three screw holes, in the second, the sixth and the tenth slots, four pitches (40 mm) apart, cammed T-nuts and recoil lugs under it, and bevelled ends. Black only (MAG593-BLK). NSN 1005-01-725-4945.

- Weight
- 0.56 oz ± 0.17 oz Provisionalworked out: The model's polymer volume, 0.8523 cubic inches (the manifest's body_volume_in3; the screws' heads apart), times std.density.polymer (Zytel nylon 66, 18.68 g, 0.659 oz to the cubic inch): 0.562 oz. Magpul names no grade ("a proprietary reinforced composite"): a glass-filled grade is up to a sixth heavier, the underside's pocket isn't drawn (the model is solid under its rail), and the height and the neck are readings or assumptions with their own ±; the ± takes all of them. The steel T-nuts and screws aren't in it.
- Lowest price
- $16.95 at Magpul, read Nov 21, 2026 (Black)
- Maker's number
- MAG593
- Colour
- Magpul Black
- Drawn as
- modelled
- Maker's page
- magpul.com
Added to “22RB .22 LR rifle”, a build on the start page, where the designer starts a new rail section.
Its figures
Every figure the site draws and checks it by, with where it came from. Open one for each source's reading, and why one is used where they differ.
Overall length (along the handguard)4.706 in ± 0.03 in 119.5 mmConflictPhoto: Magpul's mag593-feature_01, 700 x 525: the 11-slot on a hand guard's side face, three screws in, seen square on
Published “4.9" 11-slot Picatinny rail segment easily attaches to any M-LOK mounting interface”
Magpul, M-LOK® Polymer Rail, 11 Slots (MAG593), Product Details, the maker, read Oct 29, 2026 the page, harvested Oct 29, 2026
Published “MAG593 - 11 Slots, max overall length of 4.9” NSN:1005017254945”
Magpul, M-LOK® Polymer Rail Sections GIS sheet (MAG589-MAG593), page 1, the maker, read Oct 29, 2026 the page, harvested Oct 29, 2026
Photo 4.706 in ± 0.03 in used
Magpul's mag593-feature_01, 700 x 525: the 11-slot on a hand guard's side face, three screws in, seen square on, harvested
Scale: its own rail slots at the standard's pitch (std.picatinny.slot_pitch, 0.394 in: Magpul's sheet, "1913 Picatinny spec rail-mounted accessories"): the slots' edges along a strip under its top edge (rows 220 to 232), eleven alike 40.36 px apart (a straight fit from 140.2 to 543.8 over ten): 102.4 px/in. Read by the outline's two ends on that strip, where its lit sloped ends meet the hand guard: columns 90.9 and 573.1, 482.2 px; ± covers 2 px at each end
Photo 4.682 in ± 0.06 in
Magpul's mag593-blk_01, 1200 x 1200: the 11-slot alone on white, from above and in front, no screws in, harvested
Scale: its own rail slots at the standard's pitch (std.picatinny.slot_pitch, 0.394 in: Magpul's sheet, "1913 Picatinny spec rail-mounted accessories"): its lands' rear edges on the turned photo, 98.2 px apart. Read by the image turned 26.8 degrees so the part's long axis runs across; the outline's extent along it, 1167 px: 11.88 pitches
Read on Magpul's own photo of this length, scaled by its own rail slots at the standard's pitch (std.picatinny.slot_pitch, 0.394 in: Magpul's sheet, "1913 Picatinny spec rail-mounted accessories"). Magpul's "4.9" is a maximum it states for the length in tenths, and every one of the five lengths, read the same way on its own photos, is its end-to-end rail slots (11 less one pitches) and 0.76 to 0.79 in more: 0.12 to 0.18 in under Magpul's figure from the 5-slot up (the 3-slot's 0.03). Drawn at Magpul's figure with the slots on the standard's pitch, its ends would be a tenth of an inch longer than any photo shows them; Magpul's own word is that the rail is the 1913 standard's. Its square view and its studio photo agree within 0.03 in.
page and top-view differ by 0.194 in beyond what each states it is good to.
page and studio differ by 0.218 in beyond what each states it is good to.
gis and top-view differ by 0.194 in beyond what each states it is good to.
gis and studio differ by 0.218 in beyond what each states it is good to.
The outline's two ends along the rail. On the square view the slots are 0.397 in from the rear end to the rear slot's centre and 0.365 from the front slot's centre to the front end.
Height (its rail's top above the handguard's face it sits on)0.33 in ± 0.04 in 8.4 mmProvisionalWorked out: An assumption for the drawing, not a reading: no photo of this length shows its side well enough to read. Magpul's studio photos of the 7-slot and the 9-slot, read the same way (the top flat's foreshortening against the standard's 0.656 in for the camera's elevation, the band below it for the side), give 0.316 and 0.345 in; Magpul's sheet and pages describe the five lengths as one moulding in five lengths. The ± covers both.
Worked out 0.33 in ± 0.04 in used
An assumption for the drawing, not a reading: no photo of this length shows its side well enough to read. Magpul's studio photos of the 7-slot and the 9-slot, read the same way (the top flat's foreshortening against the standard's 0.656 in for the camera's elevation, the band below it for the side), give 0.316 and 0.345 in; Magpul's sheet and pages describe the five lengths as one moulding in five lengths. The ± covers both., harvested
From the mounting face (the face that bears on the hand guard) to the rail's top.
Width (side to side, at its widest under the rail's head)0.79 in ± 0.03 in 20.1 mmProvisionalPhoto: Magpul's mag593-feature_01, 700 x 525: the 11-slot on a hand guard's side face, three screws in, seen square on
Photo 0.79 in ± 0.03 in used
Magpul's mag593-feature_01, 700 x 525: the 11-slot on a hand guard's side face, three screws in, seen square on, harvested
Scale: the length's scale (102.4 px/in, its own slots). Read by its outline across a column band through its middle (columns 300 to 330): from its top edge, row 219, to the hand guard's opening beside its lower edge, about row 300: 81 px; ± covers the lower edge, which is dark on dark
Across, square on. The rail's head is the standard's (0.835 in at its widest).
Rail slots11CorroboratedPhoto: Magpul's mag593-feature_01, 700 x 525: the 11-slot on a hand guard's side face, three screws in, seen square on
Published “M-LOK® Polymer Rail, 11 Slots”
Magpul, M-LOK® Polymer Rail, 11 Slots (MAG593), Product Details, the maker, read Oct 29, 2026 the page, harvested Oct 29, 2026
Photo 11 count used
Magpul's mag593-feature_01, 700 x 525: the 11-slot on a hand guard's side face, three screws in, seen square on, harvested
Scale: none: a count. Read by eleven slots between its two ends (the strip's eleven alike, 40.36 px apart), a screw in the second, the sixth and the tenth (the same on the studio photo)
Counted on the part; the name says the same.
Rear rail slot's centre ahead of the part's rear end0.383 in 9.7 mmProvisionalWorked out: ({.length} - ({.rail_slots} - 1) * {std.picatinny.slot_pitch}) / 2
Worked out 0.383 in used
({.length} - ({.rail_slots} - 1) * {std.picatinny.slot_pitch}) / 2, harvested
Centred on its length: the square view has 0.397 and 0.365 in at its two ends, within its reading.
Rail slot its rear screw hole is in (counted from its rear end, the first is 1)2ProvisionalPhoto: Magpul's mag593-feature_01, 700 x 525: the 11-slot on a hand guard's side face, three screws in, seen square on
Photo 2 count used
Magpul's mag593-feature_01, 700 x 525: the 11-slot on a hand guard's side face, three screws in, seen square on, harvested
Scale: none: a count. Read by screws at columns 172.3, 334.3 and 495.7, each at the centre of the second, the sixth and the tenth of the slots (131.7 + 40.36 k); on the studio photo the same three slots have the holes
Rail slots from its rear screw hole to its front one (pitches)8ProvisionalPhoto: Magpul's mag593-feature_01, 700 x 525: the 11-slot on a hand guard's side face, three screws in, seen square on
Photo 8 count used
Magpul's mag593-feature_01, 700 x 525: the 11-slot on a hand guard's side face, three screws in, seen square on, harvested
Scale: none: a count. Read by screws at columns 172.3, 334.3 and 495.7, each at the centre of the second, the sixth and the tenth of the slots (131.7 + 40.36 k); on the studio photo the same three slots have the holes
Three screw holes, in the second, the sixth and the tenth slots, four pitches (40 mm, an M-LOK slot pitch) apart: the end holes eight pitches apart (3.152 in, 80 mm), a slot short of each end. The model draws a screw in each end hole.
Rail slots from its rear screw hole to its middle one (pitches)4ProvisionalPhoto: Magpul's mag593-feature_01, 700 x 525: the 11-slot on a hand guard's side face, three screws in, seen square on
Photo 4 count used
Magpul's mag593-feature_01, 700 x 525: the 11-slot on a hand guard's side face, three screws in, seen square on, harvested
Scale: none: a count. Read by screws at columns 172.3, 334.3 and 495.7, each at the centre of the second, the sixth and the tenth of the slots (131.7 + 40.36 k); on the studio photo the same three slots have the holes
The middle hole is the 'intermediate spacing option' of Magpul's sheet, as far as the photos show: two screws come with it (sellers' words), and any two of the three holes take them.
M-LOK slots its T-nuts span3ProvisionalPhoto: Magpul's mag593-feature_01, 700 x 525: the 11-slot on a hand guard's side face, three screws in, seen square on
Photo 3 count used
Magpul's mag593-feature_01, 700 x 525: the 11-slot on a hand guard's side face, three screws in, seen square on, harvested
Scale: none: a count. Read by its end screws eight rail pitches apart (3.152 in, 80 mm): a T-nut in the rear half of one slot and the other in the rear half of the slot two on
Three M-LOK slots, with screws in its two end holes.
Its seat on the M-LOK face: the centre of the M-LOK slot its rear T-nut is in, ahead of its rear end1.171 in 29.7 mmProvisionalWorked out: {.rail_slot0_x} + ({.rear_hole_slot} - 1) * {std.picatinny.slot_pitch} + {std.mlok.interval} / 2
Worked out 1.1707 in used
{.rail_slot0_x} + ({.rear_hole_slot} - 1) * {std.picatinny.slot_pitch} + {std.mlok.interval} / 2, harvested
The rear screw hole is at its slot's centre (the photos), and its T-nut sits in the rear half of an M-LOK slot, half the M-LOK interval behind that slot's centre: what an M-LOK position places is that slot's centre. Two T-nuts the interval apart then sit one in each half of one slot (the 3-slot: the hand stop's seat); one a slot pitch further on sits in the rear half of the next. Magpul's page: "Integral recoil lugs resist impact and keep rail secured under recoil and provide an intermediate spacing option" (the lugs under it between its nuts, which go into a slot), and its M-LOK page: "Your M-LOK accessory can be adjusted in 20mm increments (1/2 slot length)". Which half of a slot a nut is in isn't published: the rear half is assumed.
Reach inside the handguard (below the mounting face, tightened)No value yetMissingNo source yet
Not published: Magpul gives no figure for its cammed T-nuts or for the recoil lugs under the section.
Under the head: where its lower faces, carried on at 45 degrees past the lower gauge line, meet the neck, below the rail's top0.2 in ± 0.05 in 5.1 mmProvisionalWorked out: An assumption for the drawing, not a reading: no view of the part along its rail is on file, and the neck stands in the head's shadow in every photo. The head's lower faces are carried on at the standard's 45 degrees to here, as Midwest Industries' drop-in rail's are to theirs (0.204 in, read on its photo), so that what clamps a rail has room for its jaws under the head; the ± covers a neck from the standard's lower gauge width to two tenths narrower.
Worked out 0.2 in ± 0.05 in used
An assumption for the drawing, not a reading: no view of the part along its rail is on file, and the neck stands in the head's shadow in every photo. The head's lower faces are carried on at the standard's 45 degrees to here, as Midwest Industries' drop-in rail's are to theirs (0.204 in, read on its photo), so that what clamps a rail has room for its jaws under the head; the ± covers a neck from the standard's lower gauge width to two tenths narrower., harvested
The head's lower faces are MIL-STD-1913's to its lower gauge line (std.picatinny.lower_gauge_below_top); under them the section narrows to a neck that leaves a clamp's jaws room under the head, then widens again to its width at a shoulder near the mounting face (neck_foot_above_face). With the standard's head (lib.rail_half) this sets the neck's half width.
Under the head: the neck's foot (the shoulder where the section widens to its width) above the mounting face0.055 in ± 0.03 in 1.4 mmProvisionalWorked out: An assumption for the drawing, not a reading: no photo of this length's side shows its shoulder. The 5-slot's underside photo (e389e392fb30) reads 0.055 in; the ± covers it.
Worked out 0.055 in ± 0.03 in used
An assumption for the drawing, not a reading: no photo of this length's side shows its shoulder. The 5-slot's underside photo (e389e392fb30) reads 0.055 in; the ± covers it., harvested
Each end's slope, along the part: from the end to where its rail's top begins0.26 in ± 0.03 in 6.6 mmProvisionalPhoto: Magpul's mag593-feature_01, 700 x 525: the 11-slot on a hand guard's side face, three screws in, seen square on
Photo 0.26 in ± 0.03 in used
Magpul's mag593-feature_01, 700 x 525: the 11-slot on a hand guard's side face, three screws in, seen square on, harvested
Scale: the length's scale (102.4 px/in). Read by where the lit slope ends and its top begins: columns 119.0 and 547.4, 28.1 and 25.7 px in from the two ends
Magpul: "The beveled ends reduce snagging and eliminate sharp corners and edges." The end face slopes and rounds down from the top to a short upright face at the mounting face (the photos from above and from the end).
Each end's upright face under its slope, above the mounting face0.08 in ± 0.04 in 2 mmProvisionalWorked out: An assumption for the drawing, not a reading: no view on file shows it in profile.
Worked out 0.08 in ± 0.04 in used
An assumption for the drawing, not a reading: no view on file shows it in profile., harvested
Each end's corners cut off in plan, along the end0.13 in ± 0.03 in 3.3 mmProvisionalWorked out: An assumption for the drawing, not a reading: its square view has its ends against the dark hand guard, its corners not clear. The 3-slot's top view has 0.13 in.
Worked out 0.13 in ± 0.03 in used
An assumption for the drawing, not a reading: its square view has its ends against the dark hand guard, its corners not clear. The 3-slot's top view has 0.13 in., harvested
Each screw hole's recess, across0.41 in ± 0.03 in 10.4 mmProvisionalPhoto: Magpul's mag593-feature_01, 700 x 525: the 11-slot on a hand guard's side face, three screws in, seen square on
Photo 0.41 in ± 0.03 in used
Magpul's mag593-feature_01, 700 x 525: the 11-slot on a hand guard's side face, three screws in, seen square on, harvested
Scale: the length's scale (102.4 px/in). Read by the dark round each screw's head stands in, 41.7 px across on a threefold enlargement, by eye (on the studio photo the recesses' dark runs into the slots' shadows: 0.29 to 0.53 in, not read)
A round recess round each screw hole, into the slot it is in and the lands either side of it (every photo of the part from above).
The recess's floor above the mounting face (where the screw's head bears)0.12 in ± 0.04 in 3 mmProvisionalWorked out: An assumption for the drawing, not a reading: no view on file shows it in profile.
Worked out 0.12 in ± 0.04 in used
An assumption for the drawing, not a reading: no view on file shows it in profile., harvested
Screw hole, through0.2 in ± 0.02 in 5.1 mmProvisionalPhoto: Magpul's mag593-blk_01, 1200 x 1200: the 11-slot alone on white, from above and in front, no screws in
Photo 0.2 in ± 0.02 in used
Magpul's mag593-blk_01, 1200 x 1200: the 11-slot alone on white, from above and in front, no screws in, harvested
Scale: the length's scale (249.2 px/in along the turned photo, its own slots). Read by the image turned along the part (as for the length); along the row through each hole's centre, the white of the hole (over 170 of 255) and the dark of the recess round it (under 85, past the hole's rim): the white of its three holes 47, 53 and 52 px, 0.189, 0.213 and 0.209 in
Screw's head, across0.34 in ± 0.04 in 8.6 mmProvisionalWorked out: An assumption for the drawing, not a reading: its head stands inside its recess in every photo of this length with its screws in, and none reads it apart from the recess. The 3-slot's top view has its head 0.034 in inside its recess's rim.
Worked out 0.34 in ± 0.04 in used
An assumption for the drawing, not a reading: its head stands inside its recess in every photo of this length with its screws in, and none reads it apart from the recess. The 3-slot's top view has its head 0.034 in inside its recess's rim., harvested
Its two screws are black socket button heads (Magpul's photo of the hardware under the 5- and 7-slot sections: two screws and two T-nuts).
Screw's head, from the recess's floor to its crown0.06 in ± 0.03 in 1.5 mmProvisionalWorked out: An assumption for the drawing, not a reading: no view on file shows it in profile.
Worked out 0.06 in ± 0.03 in used
An assumption for the drawing, not a reading: no view on file shows it in profile., harvested
What it goes with
By the way it mounts, and the figures each part on file states: a part whose figures say it doesn't fit is left out, and one whose fit can't be checked from what is published is marked. A check is against published figures, not a guarantee.
M-LOK
- Uppers
- Nordic Components 22RB .22 LR upper, 16" (fit unchecked), Panzer Arms AR57 ULT Complete AR-15 Upper Receiver - 5.7x28mm - 12" (fit unchecked), Panzer Arms AR57 Ultra Light Tactical Complete AR-15 Upper Receiver - 5.7x28mm - 16" (fit unchecked)
- Handguards
- Aero Precision AR15 10.3" R-ONE M-LOK handguard (fit unchecked), Aero Precision AR15 12.7" R-ONE M-LOK handguard (fit unchecked), Aero Precision AR15 15" Enhanced M-LOK Handguard, Gen 2 (fit unchecked), Aero Precision AR15 15" R-ONE M-LOK handguard (fit unchecked), Aero Precision AR15 15" S-ONE M-LOK Handguard (fit unchecked), Aero Precision AR15 16.6" R-ONE M-LOK handguard (fit unchecked), Aero Precision AR15 7.3" R-ONE M-LOK handguard (fit unchecked), Aero Precision AR15 9.3" R-ONE M-LOK handguard (fit unchecked), BCM MCMR-10 (M-LOK® Compatible* Modular Rail) (fit unchecked), BCM MCMR-13 (M-LOK® Compatible* Modular Rail) (fit unchecked), BCM MCMR-15 (M-LOK® Compatible* Modular Rail) (fit unchecked), BCM PMCR (Polymer M-LOK® Compatible Rail)* Carbine Length-BLACK (fit unchecked), BCM PMCR (Polymer M-LOK® Compatible Rail)* Mid Length-BLACK (fit unchecked), Expo Arms Free Float AR-15 Handguard - M-LOK - 15" (fit unchecked), Geissele Automatics 10.5" Super Modular Rail MK16 M-LOK (fit unchecked), Geissele Automatics 13.5" Super Modular Rail MK16 M-LOK (fit unchecked), Geissele Automatics 15" Super Modular Rail MK16 M-LOK (fit unchecked), Magpul MOE SL® Hand Guard, Carbine-Length – AR15/M4 (fit unchecked), Magpul MOE SL® Hand Guard, Mid-Length – AR15/M4 (fit unchecked), Magpul MOE® M-LOK® Hand Guard, Carbine-Length – AR15/M4 (fit unchecked), Magpul MOE® M-LOK® Hand Guard, Mid-Length – AR15/M4 (fit unchecked), MAS Defense 12.62" NERO M-LOK FREE FLOAT (fit unchecked), MAS Defense 15" NERO M-LOK FREE FLOAT (fit unchecked), MAS Defense 9.87" NERO M-LOK FREE FLOAT (fit unchecked), Midwest Industries AR-15/M16 Two Piece Drop-In Handguard, M-LOK® (Carbine) (fit unchecked), Midwest Industries AR-15/M16 Two Piece Drop-In Handguard, M-LOK® (Mid-Length) (fit unchecked), Midwest Industries Combat Rail One Piece Free Float Handguard, M-LOK™ (15") (fit unchecked)
- Adapter plates
- Magpul M-LOK Hand Stop MOE Adapter (fit unchecked)
Picatinny rail (MIL-STD-1913)
- Red dot mounts
- Aimpoint Duty RDS One-piece TNP Mount, 30 mm, Aimpoint LRP (Lever Release Picatinny) Mount with 39 mm Spacer, for Micro, Aimpoint One-piece Torsion Nut Mount and Spacer, 39 mm, Geissele Super Precision T1 Mount - 1.93" Height, Geissele Super Precision T1 Mount - Absolute Co-Witness, Geissele Super Precision T1 Mount - Lower 1/3 Co-Witness, Holosun 1.63 in lower 1/3 co-witness pedestal mount (HS-MOUNT-AR-RISER-ARO), Midwest Industries MK2 QD T2 Aimpoint Mount, Low, Midwest Industries MK2 QD T2 Aimpoint Mount, Lower 1/3 Cowitness, Midwest Industries MK2 QD T2 Aimpoint Mount, NV 2.26 in Height, Reptilia DOT MOUNT FOR AIMPOINT® MICRO – 1.93″ HEIGHT, Reptilia DOT MOUNT FOR AIMPOINT® MICRO – LOWER 1/3 (39MM HEIGHT), Scalarworks LEAP/01 Aimpoint Micro T-2 quick-detach mount, 1.42 in, Scalarworks LEAP/01 Aimpoint Micro T-2 quick-detach mount, 1.57 in, Scalarworks LEAP/01 Aimpoint Micro T-2 quick-detach mount, 1.93 in, Scalarworks LEAP/02 Aimpoint Micro T-2 quick-detach mount, 2.26 in, SIG Sauer M1913 I-BEAM Mount, 1.41 in absolute co-witness, SIG Sauer See-Through Riser Mount, 1.41 in absolute co-witness, Unity Tactical FAST Micro Mount, 2.26 in optical centerline
- Optics
- Aimpoint Patrol Rifle Optic (PRO) Red Dot Reflex Sight - QRP2 Mount, EOTECH HWS EXPS3 holographic weapon sight, 1-Dot Speed Ring, Holosun HS510C Open Reflex MRS Solar QD Mount
- Lights
- Olight Baldr S BL, Streamlight ProTac Rail Mount HL-X, SureFire Mini Scout Light Pro, SureFire Scout Light Pro Dual Fuel
- Backup sights
- Daniel Defense A1.5 Fixed Rear Sight, Daniel Defense Rail Mounted Fixed Front Sight, Magpul MBUS 3 Sight – Front, Magpul MBUS 3 Sight – Rear, Magpul MBUS Pro Sight – Front, Magpul MBUS Pro Sight – Rear
- Magnifiers
- EOTECH G33 Magnifier, STS Mount, EOTECH G45 Magnifier, STS Mount, Holosun HM3X 3× magnifier with flip mount
- Scope mounts
- Primary Arms Deluxe AR-15 Scope Mount - 30mm, Primary Arms SLx Cantilever 30mm Mount - 1.5", Reptilia AUS™ MOUNT - 30MM DIAMETER - 39MM HEIGHT, Scalarworks LEAP/08 quick-detach scope mount, 30 mm, 1.57 in, SIG SAUER ALPHA-MSR scope mount, 30 mm, Vortex Sport Cantilever 30mm Mount
Prices on file
Each seller's latest reading of its own page: before tax and shipping, and not a quote. The pages are read again every night.
- Magpul $16.95 Black Nov 21, 2026, stock not said