Handguard
BCM PMCR (Polymer M-LOK® Compatible Rail)* Mid Length-BLACK
BCM's polymer drop-in hand guard for a mid-length gas system, in two halves: "Direct replacement handguard featuring simple "drop in" design. For most mid-length gas system, non-free float carbine-type platforms"; "Natural ergonomics; slim, comfortable and lightweight, only 5.8 ounces"; "Aggressive textured area for needed traction"; "Three, four-hole M-LOK® compatible mounting slots, mounting surfaces (10:30, 1:30, and 6:00 o'clock placements)"; "Aluminum heat shield, lessening heat transfer to the handguard and shooter's hand"; "Made of an impact and temperature resistant high strength polymer"; "Patent Pending design. Made in the USA." (BCM). It goes on the rifle's own barrel nut and delta ring and the triangular cap behind its front sight base: no free-float nut of its own.

- Weight
- 5.8 oz Confirmedpublished: BCM, BCM® PMCR (Polymer M-LOK® Compatible Rail)* Mid Length-BLACK, the maker, read Oct 28, 2026
- Lowest price
- $31.95 at BCM, read Nov 21, 2026 (Black)
- Maker's number
- BCM-PMCR-MID-BLK
- Colour
- Polymer black (placeholder)
- Drawn as
- modelled
- Maker's page
- bravocompanyusa.com
In “Aero 5.56 carbine”, a build on the start page, in place of its Aero Precision AR15 15" R-ONE M-LOK handguard. The BCM G.I. Barrel Nut - AR15 and the BCM Delta Ring Assembly - AR15 and the BCM Front Sight Base F - FSB (ID .750) - Milspec for Flat Top Uppers and the BCM Handguard Cap Triangle - .750 AR15 go in with it: its maker says it needs them.
Its figures
Every figure the site draws and checks it by, with where it came from. Open one for each source's reading, and why one is used where they differ.
Length, overall9.28 in ± 0.05 in 235.7 mmProvisionalPhoto: BCM's gallery photo STKL8992 of the black PMCR mid-length, assembled, its left side seen level, 4268 x 2846
Photo 9.28 in ± 0.05 in used
BCM's gallery photo STKL8992 of the black PMCR mid-length, assembled, its left side seen level, 4268 x 2846, harvested
Scale: its four upper M-LOK slots, centres 700.4 px apart (697 to 705) for the standard's 40 mm (std.mlok.slot_pitch): 444.7 px/in. Read by the outline (luminance under 200) from its rear end (column 4189, the upper rear flange's end) to its front face (column 62): 4127 px; ± 0.5% for the slots' scatter and the depth between the slots' faces and the outline's edges
BCM states no length. From its rear end, which bears on the delta ring's lip, to its front face, which stands ahead of the front sight base's rear face (the front hook and the upper half's front chamfer included).
Width (the upper half, across its sides)1.873 in ± 0.03 in 47.6 mmCorroboratedPhoto: BCM's gallery photo STKL8993: the two halves apart, the upper one from above, 1280 x 853
Photo 1.873 in ± 0.03 in used
BCM's gallery photo STKL8993: the two halves apart, the upper one from above, 1280 x 853, harvested
Scale: the upper half's own two rows of four M-LOK slots, centres 216.1 px apart for the standard's 40 mm: 137.2 px/in. Read by the upper half's silhouette across it at column 1019 (rows 505 to 762): 257 px; ± 4 px
Photo 1.854 in ± 0.03 in
BCM's gallery photo STKL8997: the carbine-length's two halves apart, the upper one from above, 1280 x 853, harvested
Scale: its own rows of three M-LOK slots, 278.6 px apart: 176.9 px/in. Read by the upper half across it at column 600 (rows 462 to 790): 328 px; ± 4 px: the carbine-length's, the same section by every photo of the two
The mid-length's own photo; the carbine-length's, the same section, agrees within the two ±.
The lower half's width (it stands inside the upper one's sides at the seam)1.717 in ± 0.03 in 43.6 mmProvisionalPhoto: BCM's gallery photo STKL8993: the two halves apart, the lower one from below, 1280 x 853
Photo 1.717 in ± 0.03 in used
BCM's gallery photo STKL8993: the two halves apart, the lower one from below, 1280 x 853, harvested
Scale: the lower half's own row of four M-LOK slots, 212.75 px apart for the standard's 40 mm: 135.1 px/in. Read by the lower half's silhouette across it at column 600 (rows 114 to 346): 232 px; ± 4 px
Height, excluding the front hook2.172 in ± 0.02 in 55.2 mmProvisionalPhoto: BCM's gallery photo STKL8992 of the black PMCR mid-length, assembled, its left side seen level, 4268 x 2846
Photo 2.172 in ± 0.02 in used
BCM's gallery photo STKL8992 of the black PMCR mid-length, assembled, its left side seen level, 4268 x 2846, harvested
Scale: its four upper M-LOK slots, centres 700.4 px apart (697 to 705) for the standard's 40 mm (std.mlok.slot_pitch): 444.7 px/in. Read by the outline's top (row 976, the spine's pads) to the body's bottom (row 1942) at column 2400, clear of the hook: 966 px; ± 3 px
BCM gives no height.
Its top (the spine's tab at its rear end, the outline's highest point) above the bore axis1.259 in ± 0.02 in 32 mmProvisionalPhoto: BCM's gallery photo STKL8992 of the black PMCR mid-length, assembled, its left side seen level, 4268 x 2846
Photo 1.259 in ± 0.02 in used
BCM's gallery photo STKL8992 of the black PMCR mid-length, assembled, its left side seen level, 4268 x 2846, harvested
Scale: its four upper M-LOK slots, centres 700.4 px apart (697 to 705) for the standard's 40 mm (std.mlok.slot_pitch): 444.7 px/in. Read by the bore axis at row 1532, the middle of its rear flanges (rows 1184 and 1880 at column 4140), which stand in the delta ring round the barrel nut; the outline's highest point, the spine's tab over the ring (row 972 at luminance 200, columns 4150 to 4170): 560 px; ± 6 px. The spine's pads along its length stand at rows 976 to 980, 0.01 lower
Its body's bottom (clear of the hook) below the bore axis0.922 in ± 0.02 in 23.4 mmProvisionalPhoto: BCM's gallery photo STKL8992 of the black PMCR mid-length, assembled, its left side seen level, 4268 x 2846
Photo 0.922 in ± 0.02 in used
BCM's gallery photo STKL8992 of the black PMCR mid-length, assembled, its left side seen level, 4268 x 2846, harvested
Scale: its four upper M-LOK slots, centres 700.4 px apart (697 to 705) for the standard's 40 mm (std.mlok.slot_pitch): 444.7 px/in. Read by the axis (row 1532) to the body's bottom (row 1942) at columns 1000 to 3800: 410 px; ± 6 px
The body stands higher than it hangs: 1.25 above the axis and 0.92 below, the spine over the gas tube.
Inside diameterNo value yetMissingNo source yet
BCM gives none, and no photo looks into an end. The model's inside is its outside less the wall (wall), which no view gives either.
Its rear end (bearing on the delta ring's lip) ahead of the receiver's front face0.336 in ± 0.015 in 8.5 mmProvisionalWorked out: {std.ar15.slip_ring_front_x}
Worked out 0.336 in ± 0.015 in used
{std.ar15.slip_ring_front_x}, harvested
Where the standard's delta ring holds it (std.ar15.slip_ring_front_x, from the Army's drawings): its rear flanges in the ring, against the lip. BCM's instructions (the carbine's page, its picture of them, e0a7762984ab): "pull the Delta Ring to the furthest rearward position, enough to allow the rear of the PMCR to interface with the Barrel Nut teeth. The upper handguard will surround and index to the barrel nut enough to let the Delta Ring travel forward to secure the upper handguard in place".
Its body's rear face (behind which its rear flanges and the spine's tab stand), from its rear end0.193 in ± 0.01 in 4.9 mmProvisionalPhoto: BCM's gallery photo STKL8992 of the black PMCR mid-length, assembled, its left side seen level, 4268 x 2846
Photo 0.193 in ± 0.01 in used
BCM's gallery photo STKL8992 of the black PMCR mid-length, assembled, its left side seen level, 4268 x 2846, harvested
Scale: its four upper M-LOK slots, centres 700.4 px apart (697 to 705) for the standard's 40 mm (std.mlok.slot_pitch): 444.7 px/in. Read by the body's rear face between the spine's tab and the upper flange (column 4103, rows 1100 to 1170) to the rear end (4189): 86 px; ± 3 px
Its rear flanges (what stands in the delta ring round the barrel nut), outside diameter1.6 in ± 0.03 in 40.6 mmProvisionalPhoto: BCM's gallery photo STKL8992 of the black PMCR mid-length, assembled, its left side seen level, 4268 x 2846
Photo 1.6 in ± 0.03 in used
BCM's gallery photo STKL8992 of the black PMCR mid-length, assembled, its left side seen level, 4268 x 2846, harvested
Scale: its four upper M-LOK slots, centres 700.4 px apart (697 to 705) for the standard's 40 mm (std.mlok.slot_pitch): 444.7 px/in. Read by the upper flange's top (row 1178) to the lower flange's bottom (row 1890) where each is widest, columns 4120 to 4150: 712 px; ± 8 px for their rounded rear edges (at column 4140, 1184 to 1880, 1.565). The lower half seen from below (530bce1646cf) has its flange about 225 px across at 135.1 px/in, 1.66: its edges there are its rounds, not read square
Inside the delta ring's bore (std.ar15.slip_ring_bore_d, 1.75), and no larger than the barrel nut's toothed flange (std.ar15.barrel_nut_flange_od, 1.56) and a wall: BCM's instructions have the rear of the PMCR "interface with the Barrel Nut teeth" and the upper "surround and index to the barrel nut", so its flanges stand round the teeth and in their notches, which the nut's model has as a ring; what the two share there is said in the part.
The gap between its two halves' rear flanges at each side (where the backdrop shows through)0.414 in ± 0.02 in 10.5 mmProvisionalPhoto: BCM's gallery photo STKL8992 of the black PMCR mid-length, assembled, its left side seen level, 4268 x 2846
Photo 0.414 in ± 0.02 in used
BCM's gallery photo STKL8992 of the black PMCR mid-length, assembled, its left side seen level, 4268 x 2846, harvested
Scale: its four upper M-LOK slots, centres 700.4 px apart (697 to 705) for the standard's 40 mm (std.mlok.slot_pitch): 444.7 px/in. Read by the backdrop through the rear end at column 4140: rows 1488 to 1672 (luminance over 240), 184 px; ± 3 px
That gap's middle above the bore axis (negative below)-0.108 in ± 0.02 in -2.7 mmProvisionalPhoto: BCM's gallery photo STKL8992 of the black PMCR mid-length, assembled, its left side seen level, 4268 x 2846
Photo -0.108 in ± 0.02 in used
BCM's gallery photo STKL8992 of the black PMCR mid-length, assembled, its left side seen level, 4268 x 2846, harvested
Scale: its four upper M-LOK slots, centres 700.4 px apart (697 to 705) for the standard's 40 mm (std.mlok.slot_pitch): 444.7 px/in. Read by the gap's middle (row 1580) less the axis (row 1532): 48 px under it; ± 3 px
The seam between its two halves, on the sides, above the bore axis (negative below)-0.378 in ± 0.03 in -9.6 mmProvisionalPhoto: BCM's gallery photo STKL8992 of the black PMCR mid-length, assembled, its left side seen level, 4268 x 2846
Photo -0.378 in ± 0.03 in used
BCM's gallery photo STKL8992 of the black PMCR mid-length, assembled, its left side seen level, 4268 x 2846, harvested
Scale: its four upper M-LOK slots, centres 700.4 px apart (697 to 705) for the standard's 40 mm (std.mlok.slot_pitch): 444.7 px/in. Read by the dark band where the upper half's side ends over the lower half (rows 1680 to 1720 at column 2400), its middle: 168 px under the axis; ± 10 px
The upper half reaches below the axis; the lower one, narrower (lower_width), stands inside its sides along the seam.
Where the upper half's upright side meets its M-LOK face, above the bore axis0.495 in ± 0.02 in 12.6 mmProvisionalPhoto: BCM's gallery photo STKL8992 of the black PMCR mid-length, assembled, its left side seen level, 4268 x 2846
Photo 0.495 in ± 0.02 in used
BCM's gallery photo STKL8992 of the black PMCR mid-length, assembled, its left side seen level, 4268 x 2846, harvested
Scale: its four upper M-LOK slots, centres 700.4 px apart (697 to 705) for the standard's 40 mm (std.mlok.slot_pitch): 444.7 px/in. Read by the change from the face's lit band to the side's textured one at column 2400 (row 1312): 220 px over the axis; ± 6 px
M-LOK slots in each upper face (the 10:30 and 1:30 rows)4ConfirmedPublished: BCM, BCM® PMCR (Polymer M-LOK® Compatible Rail)* Mid Length-BLACK, the maker, read Oct 28, 2026
Published “Three, four-hole M-LOK® compatible mounting slots, mounting surfaces (10:30, 1:30, and 6:00 o'clock placements)” used
BCM, BCM® PMCR (Polymer M-LOK® Compatible Rail)* Mid Length-BLACK, the maker, read Oct 28, 2026 the page, harvested Oct 28, 2026
Photo 4 count
BCM's gallery photo STKL8992 of the black PMCR mid-length, assembled, its left side seen level, 4268 x 2846, harvested
Scale: none: a count. Read by four see-through slots in the left upper row; four in the right's on e565a88f6c43, and in both upper rows and the lower row on 530bce1646cf
BCM's "four-hole" for each of the three, counted on its three photos.
The upper rows' rearmost M-LOK slot (its centre), from its rear end2.78 in ± 0.01 in 70.6 mmProvisionalPhoto: BCM's gallery photo STKL8992 of the black PMCR mid-length, assembled, its left side seen level, 4268 x 2846
Photo 2.78 in ± 0.01 in used
BCM's gallery photo STKL8992 of the black PMCR mid-length, assembled, its left side seen level, 4268 x 2846, harvested
Scale: its four upper M-LOK slots, centres 700.4 px apart (697 to 705) for the standard's 40 mm (std.mlok.slot_pitch): 444.7 px/in. Read by the rearmost slot's centre (column 2952.8, the see-through region's middle) from the rear end (4189): 1236 px; ± 3 px. The next three at 2253.1, 1556.3 and 851.7: the standard's pitch to half a percent
The upper rows' slot centres above the bore axis0.78 in ± 0.02 in 19.8 mmProvisionalPhoto: BCM's gallery photo STKL8992 of the black PMCR mid-length, assembled, its left side seen level, 4268 x 2846
Photo 0.78 in ± 0.02 in used
BCM's gallery photo STKL8992 of the black PMCR mid-length, assembled, its left side seen level, 4268 x 2846, harvested
Scale: its four upper M-LOK slots, centres 700.4 px apart (697 to 705) for the standard's 40 mm (std.mlok.slot_pitch): 444.7 px/in. Read by the slot's near rim, rows 1148 to 1222 at column 2400 (its upper wall's shadow over the see-through part): centre 1185, 347 px over the axis; ± 6 px
The upper rows' see-through slits, seen from above, out from the middle (to each side)0.543 in ± 0.02 in 13.8 mmProvisionalPhoto: BCM's gallery photo STKL8993: the two halves apart, the upper one from above, 1280 x 853
Photo 0.543 in ± 0.02 in used
BCM's gallery photo STKL8993: the two halves apart, the upper one from above, 1280 x 853, harvested
Scale: the upper half's own two rows of four M-LOK slots, centres 216.1 px apart for the standard's 40 mm: 137.2 px/in. Read by the two rows' see-through slits, centres at rows 561 and 710 at columns 401 to 1050: 74.5 px each side of their middle; ± 2 px
Not the slots' centres: from above, the upper half's own side under each face hides the outer part of what shows through a slot, so the slit stands inward of the slot. Not used by the model (mlok_side_face_distance is the face's place); kept as the reading it is.
The upper M-LOK faces' outward direction about the bore axis, from straight up (degrees)42° ± 5°CorroboratedPhoto: BCM's gallery photo STKL8992 of the black PMCR mid-length, assembled, its left side seen level, 4268 x 2846
Published “Three, four-hole M-LOK® compatible mounting slots, mounting surfaces (10:30, 1:30, and 6:00 o'clock placements)”
BCM, BCM® PMCR (Polymer M-LOK® Compatible Rail)* Mid Length-BLACK, the maker, read Oct 28, 2026 the page, harvested Oct 28, 2026
Photo 42 deg ± 5 deg used
BCM's gallery photo STKL8992 of the black PMCR mid-length, assembled, its left side seen level, 4268 x 2846, harvested
Scale: its four upper M-LOK slots, centres 700.4 px apart (697 to 705) for the standard's 40 mm (std.mlok.slot_pitch): 444.7 px/in. Read by the face runs from where the upright side ends (side_top_y, 0.495 up, at the half width, width / 2) to where it meets the spine (spine_vent_y, 1.084 up, at the spine's half width, spine_half_width): 0.589 up over 0.656 in, its outward direction 41.9° from up. The slot's near rim, 74 px tall in the level side view (rows 1148 to 1222), is the standard's 7 mm (std.mlok.slot_width) times the sine of 37°: the ±
BCM's "10:30, 1:30" says which faces; the photo's own edges put them at 42 degrees from up, within its ± of BCM's 45. The accessories stand out at the angle the faces have.
The upper M-LOK faces' distance from the bore axis (along their outward direction)0.993 in ± 0.04 in 25.2 mmProvisionalWorked out: {.width} / 2 * sin({.mlok_side_face_angle}) + {.side_top_y} * cos({.mlok_side_face_angle})
Worked out 0.993 in ± 0.04 in used
{.width} / 2 * sin({.mlok_side_face_angle}) + {.side_top_y} * cos({.mlok_side_face_angle}), harvested
The plane through the face's lower edge (the upright side's top at the half width) at the faces' angle: it meets the spine at spine_vent_y, and the slots' centres, which the level photo has 0.780 up, stand 0.04 up the face from where its normal through the axis meets it (where an accessory is placed).
M-LOK slots in the underside (six o'clock)4ConfirmedPublished: BCM, BCM® PMCR (Polymer M-LOK® Compatible Rail)* Mid Length-BLACK, the maker, read Oct 28, 2026
Published “Three, four-hole M-LOK® compatible mounting slots, mounting surfaces (10:30, 1:30, and 6:00 o'clock placements)” used
BCM, BCM® PMCR (Polymer M-LOK® Compatible Rail)* Mid Length-BLACK, the maker, read Oct 28, 2026 the page, harvested Oct 28, 2026
Photo 4 count
BCM's gallery photo STKL8993: the two halves apart, the lower one from below, 1280 x 853
Scale: none: a count. Read by four slots along the lower half's middle, the heat shield bright through them
BCM's figure, counted on its photo.
The underside's rearmost M-LOK slot (its centre), from its rear end2.15 in ± 0.06 in 54.6 mmProvisionalPhoto: BCM's gallery photo STKL8993: the two halves apart, the lower one from below, 1280 x 853
Photo 2.15 in ± 0.06 in used
BCM's gallery photo STKL8993: the two halves apart, the lower one from below, 1280 x 853
Scale: its own row of four M-LOK slots, 212.75 px apart: 135.1 px/in. Read by the slots' see-through middles along row 225 at columns 523.5, 739 and 949 (the rearmost is broken by the shield behind it: one pitch behind the second, 310.8) less the lower half's rear end (column 20): 290.8 px; ± 0.06 in for the lower half's rear end, whose flange stops 0.03 in short of the upper's in the side view
The underside's M-LOK face, its distance below the bore axis0.922 in ± 0.02 in 23.4 mmProvisionalWorked out: {.bottom_below_axis}
Worked out 0.922 in ± 0.02 in used
{.bottom_below_axis}, harvested
The room inside its M-LOK faces before what runs through it (how far an accessory's nuts may reach in)No value yetMissingNo source yet
Depends on the barrel, the gas tube and the heat shield, and on the wall, which no view gives: no figure, so the check reads as unmade.
Its underside's flat (where the six o'clock slots are), half its width0.3 in ± 0.08 in 7.6 mmProvisionalWorked out: An assumption for the drawing, not a reading: the lower half from below (530bce1646cf) shows its slot row between its two rows of vents on faces turned down and out; the flat is taken as the slot's 7 mm and a margin each side as wide as the webs between the vents and the slots.
Worked out 0.3 in ± 0.08 in used
An assumption for the drawing, not a reading: the lower half from below (530bce1646cf) shows its slot row between its two rows of vents on faces turned down and out; the flat is taken as the slot's 7 mm and a margin each side as wide as the webs between the vents and the slots., harvested
The vents along each lower side (through to the heat shield)7ProvisionalPhoto: BCM's gallery photo STKL8992 of the black PMCR mid-length, assembled, its left side seen level, 4268 x 2846
Photo 7 count used
BCM's gallery photo STKL8992 of the black PMCR mid-length, assembled, its left side seen level, 4268 x 2846, harvested
Scale: none: a count. Read by seven dark runs along row 1905; seven in each row either side of the six o'clock slots on 530bce1646cf, the shield bright through them
The rearmost lower vent's middle, from its rear end1.376 in ± 0.01 in 35 mmProvisionalPhoto: BCM's gallery photo STKL8992 of the black PMCR mid-length, assembled, its left side seen level, 4268 x 2846
Photo 1.376 in ± 0.01 in used
BCM's gallery photo STKL8992 of the black PMCR mid-length, assembled, its left side seen level, 4268 x 2846, harvested
Scale: its four upper M-LOK slots, centres 700.4 px apart (697 to 705) for the standard's 40 mm (std.mlok.slot_pitch): 444.7 px/in. Read by dark runs along row 1905 (luminance under 45), centres 3577, 3122.5, 2670.5, 2219.5, 1768.5, 1316.5, 862: the rearmost 612 px ahead of the rear end; ± 3 px
The lower vents, middle to middle1.018 in ± 0.005 in 25.8 mmProvisionalPhoto: BCM's gallery photo STKL8992 of the black PMCR mid-length, assembled, its left side seen level, 4268 x 2846
Photo 1.0175 in ± 0.005 in used
BCM's gallery photo STKL8992 of the black PMCR mid-length, assembled, its left side seen level, 4268 x 2846, harvested
Scale: its four upper M-LOK slots, centres 700.4 px apart (697 to 705) for the standard's 40 mm (std.mlok.slot_pitch): 444.7 px/in. Read by the first to the last, 2715 px over six gaps: 452.5 px each
Each lower vent's length along it0.607 in ± 0.01 in 15.4 mmProvisionalPhoto: BCM's gallery photo STKL8992 of the black PMCR mid-length, assembled, its left side seen level, 4268 x 2846
Photo 0.607 in ± 0.01 in used
BCM's gallery photo STKL8992 of the black PMCR mid-length, assembled, its left side seen level, 4268 x 2846, harvested
Scale: its four upper M-LOK slots, centres 700.4 px apart (697 to 705) for the standard's 40 mm (std.mlok.slot_pitch): 444.7 px/in. Read by the dark runs along row 1905: 270 to 273 px
The lower vents' middles above the bore axis (negative below)-0.843 in ± 0.03 in -21.4 mmProvisionalPhoto: BCM's gallery photo STKL8992 of the black PMCR mid-length, assembled, its left side seen level, 4268 x 2846
Photo -0.843 in ± 0.03 in used
BCM's gallery photo STKL8992 of the black PMCR mid-length, assembled, its left side seen level, 4268 x 2846, harvested
Scale: its four upper M-LOK slots, centres 700.4 px apart (697 to 705) for the standard's 40 mm (std.mlok.slot_pitch): 444.7 px/in. Read by the dark runs between rows 1880 and 1935 at columns 862 to 3577: middle 1907, 375 px under the axis; ± 8 px
The lower vents' middles out from the middle (to each side)0.418 in ± 0.03 in 10.6 mmProvisionalPhoto: BCM's gallery photo STKL8993: the two halves apart, the lower one from below, 1280 x 853
Photo 0.418 in ± 0.03 in used
BCM's gallery photo STKL8993: the two halves apart, the lower one from below, 1280 x 853
Scale: its own row of four M-LOK slots: 135.1 px/in. Read by the two rows of vents, middles at rows 167 and 280: 56.5 px each side of the slots' row; ± 3 px
Each lower vent's width across it0.12 in ± 0.02 in 3 mmProvisionalPhoto: BCM's gallery photo STKL8993: the two halves apart, the lower one from below, 1280 x 853
Photo 0.12 in ± 0.02 in used
BCM's gallery photo STKL8993: the two halves apart, the lower one from below, 1280 x 853
Scale: its own row of four M-LOK slots: 135.1 px/in. Read by a vent's dark band across column 600 (rows 148 to 164): 16 px; ± 2 px, on a face turned partly away from the lens
The spine along its top (the outer edges of its two rows of pockets), half its width0.272 in ± 0.02 in 6.9 mmProvisionalPhoto: BCM's gallery photo STKL8993: the two halves apart, the upper one from above, 1280 x 853
Photo 0.272 in ± 0.02 in used
BCM's gallery photo STKL8993: the two halves apart, the upper one from above, 1280 x 853, harvested
Scale: the upper half's own two rows of four M-LOK slots, centres 216.1 px apart for the standard's 40 mm: 137.2 px/in. Read by the two rows of pockets along the top, their outer edges at rows 598.7 and 673.3 (on a crop at 1.5 times): 37.3 px each side of their middle; ± 3 px
The bottom of the spine (where the M-LOK faces meet it), above the bore axis1.084 in ± 0.02 in 27.5 mmProvisionalPhoto: BCM's gallery photo STKL8992 of the black PMCR mid-length, assembled, its left side seen level, 4268 x 2846
Photo 1.084 in ± 0.02 in used
BCM's gallery photo STKL8992 of the black PMCR mid-length, assembled, its left side seen level, 4268 x 2846, harvested
Scale: its four upper M-LOK slots, centres 700.4 px apart (697 to 705) for the standard's 40 mm (std.mlok.slot_pitch): 444.7 px/in. Read by the spine's pockets' lower edge and the face's lit band's top at column 2400 (row 1050): 482 px over the axis; ± 4 px
The ribs across the spine (between its pockets, and at its ends)18ProvisionalPhoto: BCM's gallery photo STKL8993: the two halves apart, the upper one from above, 1280 x 853
Photo 18 count used
BCM's gallery photo STKL8993: the two halves apart, the upper one from above, 1280 x 853, harvested
Scale: none: a count. Read by eighteen dark lines across the two rows of pockets along row 603 (columns 40 to 1212), the shadows of the ribs between them: seventeen pockets a row
The rearmost rib across the spine (its rear wall's shadow line), from its rear end0.146 in ± 0.02 in 3.7 mmProvisionalPhoto: BCM's gallery photo STKL8993: the two halves apart, the upper one from above, 1280 x 853
Photo 0.146 in ± 0.02 in used
BCM's gallery photo STKL8993: the two halves apart, the upper one from above, 1280 x 853, harvested
Scale: the upper half's own two rows of four M-LOK slots, centres 216.1 px apart for the standard's 40 mm: 137.2 px/in. Read by the first dark line along row 603 (column 40) less the rear end (20): 20 px; ± 2 px
The ribs across the spine, middle to middle0.502 in ± 0.005 in 12.8 mmProvisionalPhoto: BCM's gallery photo STKL8993: the two halves apart, the upper one from above, 1280 x 853
Photo 0.5025 in ± 0.005 in used
BCM's gallery photo STKL8993: the two halves apart, the upper one from above, 1280 x 853, harvested
Scale: the upper half's own two rows of four M-LOK slots, centres 216.1 px apart for the standard's 40 mm: 137.2 px/in. Read by the first to the last line, columns 40 to 1212: 1172 px over seventeen gaps, 68.94 px each
Half the spine's vents' pitch on the side view (spine_vent_pitch, 1.014): the two photos agree within 1%.
The rib along the spine's middle, between its two rows of pockets: its width0.267 in ± 0.02 in 6.8 mmProvisionalPhoto: BCM's gallery photo STKL8993: the two halves apart, the upper one from above, 1280 x 853
Photo 0.267 in ± 0.02 in used
BCM's gallery photo STKL8993: the two halves apart, the upper one from above, 1280 x 853, harvested
Scale: the upper half's own two rows of four M-LOK slots: 137.2 px/in. Read by between the pockets' inner edges, rows 616.7 and 653.3 (on a crop at 1.5 times): 36.7 px; ± 3 px
The ribs across the spine between its pockets (along it), their width0.15 in ± 0.03 in 3.8 mmProvisionalPhoto: BCM's gallery photo STKL8993: the two halves apart, the upper one from above, 1280 x 853
Photo 0.15 in ± 0.03 in used
BCM's gallery photo STKL8993: the two halves apart, the upper one from above, 1280 x 853, harvested
Scale: the upper half's own two rows of four M-LOK slots: 137.2 px/in. Read by the lit ribs between the pockets, about 20 px along (30 on the crop at 1.5 times), each with a dark line of its wall's shadow at its rear; ± 4 px, by eye
The pockets lie between the ribs, centred between the lines spine_groove0_x and spine_groove_pitch place: as long as the pitch less a rib.
The rim along the spine's outer top edge, over its pockets0.04 in ± 0.02 in 1 mmProvisionalWorked out: An assumption for the drawing, not a reading: the level side view's top edge runs straight over the pockets (no notch where each is), so a rim stands along the top over them; from above it is a thin lit edge outside each pocket, 2 px on the mid-length's photo (0.015 in) and 8 px on the carbine-length's (0.045).
Worked out 0.04 in ± 0.02 in used
An assumption for the drawing, not a reading: the level side view's top edge runs straight over the pockets (no notch where each is), so a rim stands along the top over them; from above it is a thin lit edge outside each pocket, 2 px on the mid-length's photo (0.015 in) and 8 px on the carbine-length's (0.045)., harvested
The slit through the floor of every other pocket (by the middle rib), its width0.03 in ± 0.01 in 0.8 mmProvisionalPhoto: BCM's gallery photo STKL8993: the two halves apart, the upper one from above, 1280 x 853
Photo 0.03 in ± 0.01 in used
BCM's gallery photo STKL8993: the two halves apart, the upper one from above, 1280 x 853, harvested
Scale: the upper half's own two rows of four M-LOK slots: 137.2 px/in. Read by the backdrop seen through under the first three pockets' inner edges, rows 615 to 618 and 612 to 615: 4 px; ± 1 px
The windows in each side of the spine, into every other pocket8ProvisionalPhoto: BCM's gallery photo STKL8992 of the black PMCR mid-length, assembled, its left side seen level, 4268 x 2846
Photo 8 count used
BCM's gallery photo STKL8992 of the black PMCR mid-length, assembled, its left side seen level, 4268 x 2846, harvested
Scale: none: a count. Read by eight dark pockets along row 1025, each under a pad; the see-through slits under alternate pads from above (530bce1646cf) agree
The rearmost spine vent's middle, from its rear end0.858 in ± 0.01 in 21.8 mmProvisionalPhoto: BCM's gallery photo STKL8992 of the black PMCR mid-length, assembled, its left side seen level, 4268 x 2846
Photo 0.858 in ± 0.01 in used
BCM's gallery photo STKL8992 of the black PMCR mid-length, assembled, its left side seen level, 4268 x 2846, harvested
Scale: its four upper M-LOK slots, centres 700.4 px apart (697 to 705) for the standard's 40 mm (std.mlok.slot_pitch): 444.7 px/in. Read by the dark pockets along row 1025 (luminance under 45), centres 3807.5, 3354, 2902.5, 2452, 2002.5, 1555, 1104.5, 651: the rearmost 381.5 px ahead of the rear end. From above, the slits under the first three pads at 0.89, 1.91 and 2.88
The spine's vents, middle to middle1.014 in ± 0.005 in 25.8 mmProvisionalPhoto: BCM's gallery photo STKL8992 of the black PMCR mid-length, assembled, its left side seen level, 4268 x 2846
Photo 1.014 in ± 0.005 in used
BCM's gallery photo STKL8992 of the black PMCR mid-length, assembled, its left side seen level, 4268 x 2846, harvested
Scale: its four upper M-LOK slots, centres 700.4 px apart (697 to 705) for the standard's 40 mm (std.mlok.slot_pitch): 444.7 px/in. Read by the first to the last, 3156.5 px over seven gaps: 450.9 px each
Each spine vent's length along it0.4 in ± 0.01 in 10.2 mmProvisionalPhoto: BCM's gallery photo STKL8992 of the black PMCR mid-length, assembled, its left side seen level, 4268 x 2846
Photo 0.4 in ± 0.01 in used
BCM's gallery photo STKL8992 of the black PMCR mid-length, assembled, its left side seen level, 4268 x 2846, harvested
Scale: its four upper M-LOK slots, centres 700.4 px apart (697 to 705) for the standard's 40 mm (std.mlok.slot_pitch): 444.7 px/in. Read by the dark pockets along row 1025: 174 to 181 px
Each spine vent's height (from the spine's bottom up)0.103 in ± 0.01 in 2.6 mmProvisionalPhoto: BCM's gallery photo STKL8992 of the black PMCR mid-length, assembled, its left side seen level, 4268 x 2846
Photo 0.103 in ± 0.01 in used
BCM's gallery photo STKL8992 of the black PMCR mid-length, assembled, its left side seen level, 4268 x 2846, harvested
Scale: its four upper M-LOK slots, centres 700.4 px apart (697 to 705) for the standard's 40 mm (std.mlok.slot_pitch): 444.7 px/in. Read by the dark pocket at column 2400, rows 1004 to 1050: 46 px
The opening across the top of its front end (round the front sight base's tower): its back, from its rear end8.863 in ± 0.03 in 225.1 mmProvisionalPhoto: BCM's gallery photo STKL8993: the two halves apart, the upper one from above, 1280 x 853
Photo 8.863 in ± 0.03 in used
BCM's gallery photo STKL8993: the two halves apart, the upper one from above, 1280 x 853, harvested
Scale: the upper half's own two rows of four M-LOK slots, centres 216.1 px apart for the standard's 40 mm: 137.2 px/in. Read by along the spine's middle (row 635) the polymer ends at column 1236, the rear end at column 20: 1216 px; ± 3 px. The backdrop shows from there to the faces' front tip seen from above (column 1264, 9.067 in from the rear end), which stands behind the side view's front face (length) by the front's chamfer
That opening's half width, at its back0.48 in ± 0.05 in 12.2 mmProvisionalPhoto: BCM's gallery photo STKL8993: the two halves apart, the upper one from above, 1280 x 853
Photo 0.48 in ± 0.05 in used
BCM's gallery photo STKL8993: the two halves apart, the upper one from above, 1280 x 853, harvested
Scale: the upper half's own two rows of four M-LOK slots: 137.2 px/in. Read by across column 1240 (0.17 in from the front), the backdrop from row 567 to row 699: 66 px each side of the middle (633); it widens to 0.70 at column 1250; ± 6 px
The textured panels' top edge, above the bore axis0.47 in ± 0.02 in 11.9 mmProvisionalPhoto: BCM's gallery photo STKL8992 of the black PMCR mid-length, assembled, its left side seen level, 4268 x 2846
Photo 0.47 in ± 0.02 in used
BCM's gallery photo STKL8992 of the black PMCR mid-length, assembled, its left side seen level, 4268 x 2846, harvested
Scale: its four upper M-LOK slots, centres 700.4 px apart (697 to 705) for the standard's 40 mm (std.mlok.slot_pitch): 444.7 px/in. Read by the panels' upper edge along the side (row 1323): 209 px over the axis; ± 5 px
The textured panels' bottom edge, above the bore axis (negative below)-0.13 in ± 0.02 in -3.3 mmProvisionalPhoto: BCM's gallery photo STKL8992 of the black PMCR mid-length, assembled, its left side seen level, 4268 x 2846
Photo -0.13 in ± 0.02 in used
BCM's gallery photo STKL8992 of the black PMCR mid-length, assembled, its left side seen level, 4268 x 2846, harvested
Scale: its four upper M-LOK slots, centres 700.4 px apart (697 to 705) for the standard's 40 mm (std.mlok.slot_pitch): 444.7 px/in. Read by the panels' lower edge (row 1590): 58 px under the axis; ± 5 px
The rearmost panel's rear end, from its rear end0.5 in ± 0.05 in 12.7 mmProvisionalPhoto: BCM's main photo STKL8991, the mid-length assembled, its right side seen level, 1280 x 853
Photo 0.5 in ± 0.05 in used
BCM's main photo STKL8991, the mid-length assembled, its right side seen level, 1280 x 853
Scale: its four upper M-LOK slots, 210.9 px apart: 133.9 px/in. Read by the panel's rear end (column 85) less the rear end (18): 67 px; ± 6 px, by eye on the photo
The ribs between the textured panels: how many3ProvisionalPhoto: BCM's main photo STKL8991, the mid-length assembled, its right side seen level, 1280 x 853
Photo 3 count used
BCM's main photo STKL8991, the mid-length assembled, its right side seen level, 1280 x 853
Scale: none: a count. Read by four panels along each side (the front one under the star), with a rib between each two; the same on the left side (0ff6a5264742)
The ribs between the panels: where each meets the panels' top edge, from its rear end (the first)5.09 in ± 0.05 in 129.3 mmProvisionalPhoto: BCM's main photo STKL8991, the mid-length assembled, its right side seen level, 1280 x 853
Photo 5.09 in ± 0.05 in used
BCM's main photo STKL8991, the mid-length assembled, its right side seen level, 1280 x 853
Scale: its four upper M-LOK slots, 210.9 px apart: 133.9 px/in. Read by the first rib's top at column 700 less the rear end (18); the second's at 930 (6.81) and the third's at 1140 (8.38); ± 6 px, by eye. On the left side (0ff6a5264742) the first two at 5.08 and 6.80
The three ribs' tops: 5.09, 6.81 and 8.38 (panel_divider1_top_x, panel_divider2_top_x).
The second rib's top, from its rear end6.81 in ± 0.05 in 173 mmProvisionalPhoto: BCM's main photo STKL8991, the mid-length assembled, its right side seen level, 1280 x 853
Photo 6.81 in ± 0.05 in used
BCM's main photo STKL8991, the mid-length assembled, its right side seen level, 1280 x 853, harvested
Scale: its four upper M-LOK slots: 133.9 px/in. Read by column 930 less the rear end (18); ± 6 px, by eye
The third rib's top (the star panel's rear edge), from its rear end8.38 in ± 0.05 in 212.9 mmProvisionalPhoto: BCM's main photo STKL8991, the mid-length assembled, its right side seen level, 1280 x 853
Photo 8.38 in ± 0.05 in used
BCM's main photo STKL8991, the mid-length assembled, its right side seen level, 1280 x 853, harvested
Scale: its four upper M-LOK slots: 133.9 px/in. Read by column 1140 less the rear end (18); ± 6 px, by eye
The first rib's foot (where it meets the panels' bottom edge), from its rear end3.94 in ± 0.05 in 100.1 mmProvisionalPhoto: BCM's main photo STKL8991, the mid-length assembled, its right side seen level, 1280 x 853
Photo 3.94 in ± 0.05 in used
BCM's main photo STKL8991, the mid-length assembled, its right side seen level, 1280 x 853, harvested
Scale: its four upper M-LOK slots: 133.9 px/in. Read by column 545 less the rear end (18); ± 6 px, by eye
The second rib's foot, from its rear end6.21 in ± 0.05 in 157.7 mmProvisionalPhoto: BCM's main photo STKL8991, the mid-length assembled, its right side seen level, 1280 x 853
Photo 6.21 in ± 0.05 in used
BCM's main photo STKL8991, the mid-length assembled, its right side seen level, 1280 x 853, harvested
Scale: its four upper M-LOK slots: 133.9 px/in. Read by column 850 less the rear end (18); ± 6 px, by eye
The third rib's foot, from its rear end8.42 in ± 0.05 in 213.9 mmProvisionalPhoto: BCM's main photo STKL8991, the mid-length assembled, its right side seen level, 1280 x 853
Photo 8.42 in ± 0.05 in used
BCM's main photo STKL8991, the mid-length assembled, its right side seen level, 1280 x 853, harvested
Scale: its four upper M-LOK slots: 133.9 px/in. Read by column 1145 less the rear end (18); ± 6 px, by eye
The ribs between the panels, their width0.11 in ± 0.03 in 2.8 mmProvisionalPhoto: BCM's main photo STKL8991, the mid-length assembled, its right side seen level, 1280 x 853
Photo 0.11 in ± 0.03 in used
BCM's main photo STKL8991, the mid-length assembled, its right side seen level, 1280 x 853, harvested
Scale: its four upper M-LOK slots: 133.9 px/in. Read by the smooth ribs between the stippled panels, about 15 px across; ± 4 px, by eye
How far the textured panels stand in from the side round them0.015 in ± 0.01 in 0.4 mmProvisionalWorked out: An assumption for the drawing, not a reading: BCM's "Aggressive textured area" is a stipple whose edge catches the light round each panel in the photos; no view shows it in section. Drawn as a shallow recess, the stipple itself not drawn.
Worked out 0.015 in ± 0.01 in used
An assumption for the drawing, not a reading: BCM's "Aggressive textured area" is a stipple whose edge catches the light round each panel in the photos; no view shows it in section. Drawn as a shallow recess, the stipple itself not drawn., harvested
The ribbed tab on the lower half's rear (over the upper half's side): its rear end, from its rear end0.133 in ± 0.02 in 3.4 mmProvisionalPhoto: BCM's gallery photo STKL8992 of the black PMCR mid-length, assembled, its left side seen level, 4268 x 2846
Photo 0.133 in ± 0.02 in used
BCM's gallery photo STKL8992 of the black PMCR mid-length, assembled, its left side seen level, 4268 x 2846, harvested
Scale: its four upper M-LOK slots, centres 700.4 px apart (697 to 705) for the standard's 40 mm (std.mlok.slot_pitch): 444.7 px/in. Read by the tab's rear end at column 4130 (rows 1530 to 1680, ahead of the gap between the flanges) less the rear end (4189); ± 4 px
The ribbed tab's front end (at the seam), from its rear end1.06 in ± 0.03 in 26.9 mmProvisionalPhoto: BCM's gallery photo STKL8992 of the black PMCR mid-length, assembled, its left side seen level, 4268 x 2846
Photo 1.06 in ± 0.03 in used
BCM's gallery photo STKL8992 of the black PMCR mid-length, assembled, its left side seen level, 4268 x 2846, harvested
Scale: its four upper M-LOK slots, centres 700.4 px apart (697 to 705) for the standard's 40 mm (std.mlok.slot_pitch): 444.7 px/in. Read by the tab's lower front corner at column 3718: 471 px ahead of the rear end; ± 8 px
The ribbed tab's top (its rear part, level), above the bore axis0.005 in ± 0.02 in 0.1 mmProvisionalPhoto: BCM's gallery photo STKL8992 of the black PMCR mid-length, assembled, its left side seen level, 4268 x 2846
Photo 0.005 in ± 0.02 in used
BCM's gallery photo STKL8992 of the black PMCR mid-length, assembled, its left side seen level, 4268 x 2846, harvested
Scale: its four upper M-LOK slots, centres 700.4 px apart (697 to 705) for the standard's 40 mm (std.mlok.slot_pitch): 444.7 px/in. Read by its top edge at row 1530 from column 3880 to 4130, falling to row 1650 at column 3720; ± 6 px
Where the ribbed tab's level top begins to fall toward its front, from its rear end0.695 in ± 0.04 in 17.7 mmProvisionalPhoto: BCM's gallery photo STKL8992 of the black PMCR mid-length, assembled, its left side seen level, 4268 x 2846
Photo 0.695 in ± 0.04 in used
BCM's gallery photo STKL8992 of the black PMCR mid-length, assembled, its left side seen level, 4268 x 2846, harvested
Scale: its four upper M-LOK slots, centres 700.4 px apart (697 to 705) for the standard's 40 mm (std.mlok.slot_pitch): 444.7 px/in. Read by its top edge level at row 1530 back from column 3880, falling ahead of it to row 1650 at column 3720: 309 px ahead of the rear end; ± 15 px, by eye on a crop
How far the ribbed tab stands out from the upper half's side0.03 in ± 0.015 in 0.8 mmProvisionalWorked out: An assumption for the drawing, not a reading: the tab shows its lit top edge over the upper half's side in the level side views; how far it stands out isn't seen from above or an end.
Worked out 0.03 in ± 0.015 in used
An assumption for the drawing, not a reading: the tab shows its lit top edge over the upper half's side in the level side views; how far it stands out isn't seen from above or an end., harvested
Its length between the ring and the cap (from its rear end to its front flange's end)8.45 in ± 0.1 in 214.6 mmProvisionalWorked out: An assumption for the drawing, not a reading: BCM states none and no photo shows the front flange, inside its front end. Taken as from its rear end on the delta ring's lip (rear_x) to the triangular cap's floor on BCM's 16 in mid-length barrel with BCM's F base: the triangle cap's rim at 15.573 in the rifle and its floor 0.245 in ahead (bcm-handguard-cap-triangle-750: its length less its collar and sheet), less the ring's lip at 7.372 (std.ar15.upper_front_face_x + std.ar15.slip_ring_front_x).
Worked out 8.45 in ± 0.1 in used
An assumption for the drawing, not a reading: BCM states none and no photo shows the front flange, inside its front end. Taken as from its rear end on the delta ring's lip (rear_x) to the triangular cap's floor on BCM's 16 in mid-length barrel with BCM's F base: the triangle cap's rim at 15.573 in the rifle and its floor 0.245 in ahead (bcm-handguard-cap-triangle-750: its length less its collar and sheet), less the ring's lip at 7.372 (std.ar15.upper_front_face_x + std.ar15.slip_ring_front_x)., harvested
Its front flange (what goes into the triangular cap), outside diameter1.36 in ± 0.05 in 34.5 mmProvisionalWorked out: An assumption for the drawing, not a reading: the flange goes into the cap (BCM: "will only fit the M16A1 'Triangular' front handguard retaining cap") and shows on no photo. Drawn round, inside the triangular cap's sides, which stand 0.689 from the axis inside at their middles (bcm-handguard-cap-triangle-750: side_r less side_centre_r less the sheet): a flange that takes only the triangle's shape fills its corners, which isn't drawn.
Worked out 1.36 in ± 0.05 in used
An assumption for the drawing, not a reading: the flange goes into the cap (BCM: "will only fit the M16A1 'Triangular' front handguard retaining cap") and shows on no photo. Drawn round, inside the triangular cap's sides, which stand 0.689 from the axis inside at their middles (bcm-handguard-cap-triangle-750: side_r less side_centre_r less the sheet): a flange that takes only the triangle's shape fills its corners, which isn't drawn., harvested
Its front flange's length (into the cap)0.4 in ± 0.1 in 10.2 mmProvisionalWorked out: An assumption for the drawing, not a reading: no view shows the flange. Long enough that the front wall it stands from stays behind the triangular cap's rim with the flange home in its pocket (0.245 deep).
Worked out 0.4 in ± 0.1 in used
An assumption for the drawing, not a reading: no view shows the flange. Long enough that the front wall it stands from stays behind the triangular cap's rim with the flange home in its pocket (0.245 deep)., harvested
How far its inside stands off the front sight base where the base stands in its front end0.02 in ± 0.01 in 0.5 mmProvisionalWorked out: An assumption for the drawing, not a reading: no photo looks into its front end, and the real part goes on round a front sight base (BCM's instructions draw it so). The inside under the hood is cut clear of BCM's F base model (bcm-front-sight-base-f-750) as it stands with the hand guard seated in the triangular cap, this far off each of the base's faces.
Worked out 0.02 in ± 0.01 in used
An assumption for the drawing, not a reading: no photo looks into its front end, and the real part goes on round a front sight base (BCM's instructions draw it so). The inside under the hood is cut clear of BCM's F base model (bcm-front-sight-base-f-750) as it stands with the hand guard seated in the triangular cap, this far off each of the base's faces., harvested
Its polymer wall's thickness0.1 in ± 0.04 in 2.5 mmProvisionalWorked out: An assumption for the drawing, not a reading: no view shows an end square on or a section. Taken so that the model comes near BCM's 5.8 oz at the polymer's density on file (std.density.polymer, an unfilled nylon) with its aluminium heat shield.
Worked out 0.1 in ± 0.04 in used
An assumption for the drawing, not a reading: no view shows an end square on or a section. Taken so that the model comes near BCM's 5.8 oz at the polymer's density on file (std.density.polymer, an unfilled nylon) with its aluminium heat shield., harvested
Its aluminium heat shield's thickness0.03 in ± 0.015 in 0.8 mmProvisionalWorked out: An assumption for the drawing, not a reading: the shield shows only through the lower half's slots and vents, never in section.
Worked out 0.03 in ± 0.015 in used
An assumption for the drawing, not a reading: the shield shows only through the lower half's slots and vents, never in section., harvested
Its front wall (the inner face the front flange stands from), from its rear end7.95 in ± 0.15 in 201.9 mmProvisionalWorked out: {.mounting_length} - {.front_flange_length} - {.wall}
Worked out 7.95 in ± 0.15 in used
{.mounting_length} - {.front_flange_length} - {.wall}, harvested
Ahead of the wall the shell runs on open to its front face, over the cap and the front sight base's rear.
What it goes with
By the way it mounts, and the figures each part on file states: a part whose figures say it doesn't fit is left out, and one whose fit can't be checked from what is published is marked. A check is against published figures, not a guarantee.
Drop-in handguard's front in its cap
Handguard mount
Drop-in handguard's hold
- Delta rings
- BCM Delta Ring Assembly - AR15
Gas system length
- Barrels
- Aero Precision 16" 5.56 CMV barrel, mid-length, BCM Standard 14.5" Mid Length Barrel, Stripped, BCM Standard 16" Mid Length Barrel, Stripped, Bear Creek Arsenal BC-15 5.56 NATO, 16" Parkerized M4 Barrel, 1:7 Twist, Mid-Length Gas System, Faxon Firearms Duty Series Pencil Profile 16" Mid-Length 5.56 NATO AR15 Barrel, Geissele Automatics CHF Chrome Lined Barrel - 5.56 - 13.9", Geissele Automatics CHF Chrome Lined Barrel - 5.56 - 14.5", Geissele Automatics CHF Chrome Lined Barrel - 5.56 - 16"
M-LOK
- Hand stops
- BCM KAG (M-LOK® Compatible*) (fit unchecked), Magpul M-LOK Hand Stop (fit unchecked), Magpul M-LOK Index Panel (fit unchecked)
- Vertical grips
- BCM Vertical Grip Mod 3 (M-LOK® Compatible*) (fit unchecked), Magpul M-LOK MVG vertical grip (fit unchecked)
- Lights
- Cloud Defensive REIN (fit unchecked), Streamlight ProTac Rail Mount HL-X (fit unchecked), SureFire Mini Scout Light Pro (fit unchecked), SureFire Scout Light Pro Dual Fuel (fit unchecked)
- Rail sections
- Magpul M-LOK® Aluminum Rail, 3 Slots (fit unchecked), Magpul M-LOK® Aluminum Rail, 5 Slots (fit unchecked), Magpul M-LOK® Aluminum Rail, 7 Slots (fit unchecked), Magpul M-LOK® Aluminum Rail, 9 Slots (fit unchecked), Magpul M-LOK® Polymer Rail, 11 Slots (fit unchecked), Magpul M-LOK® Polymer Rail, 3 Slots (fit unchecked), Magpul M-LOK® Polymer Rail, 5 Slots (fit unchecked), Magpul M-LOK® Polymer Rail, 7 Slots (fit unchecked), Magpul M-LOK® Polymer Rail, 9 Slots (fit unchecked)
- Adapter plates
- Magpul M-LOK Hand Stop MOE Adapter (fit unchecked)
- Sling mounts
- Magpul M-LOK QD Sling Mount (fit unchecked)
- Rail covers
- Magpul M-LOK Rail Cover Type 2 (fit unchecked)
Prices on file
Each seller's latest reading of its own page: before tax and shipping, and not a quote. The pages are read again every night.
- BCM $31.95 Black Nov 21, 2026, in stock that day
- Primary Arms $31.95 Black Nov 21, 2026, in stock that day