Upper
Aero Precision M4E1 Threaded upper receiver
Aero Precision's M4E1 Threaded stripped upper: a forged 7075-T6 flat-top receiver with the M4E1's body profile, "threaded to accept a standard AR15 barrel nut" and "precision machined to work with all mil-spec AR15 parts". Sold without a port door or forward assist.

- Weight
- 6.9 oz ± 0.05 oz Confirmedpublished: Aero Precision, M4E1 Threaded Stripped Upper Receiver - Anodized Black (APAR700201C), Specifications, the maker, read Oct 2, 2026
- Lowest price
- $150.00 at Aero Precision, read Nov 21, 2026 (Anodized Black)
- Maker's number
- APAR700201C
- Colours
- Anodized Black, FDE Cerakote, OD Green Anodized, Kodiak Brown Anodized, Sniper Grey Cerakote
- Drawn as
- modelled
- Maker's page
- aeroprecisionusa.com
In “Aero 5.56 carbine”, a build on the start page, as it is.
Its figures
Every figure the site draws and checks it by, with where it came from. Open one for each source's reading, and why one is used where they differ.
Weight, assembled (its port door and forward assist installed; no barrel)8.65 oz ± 0.005 ozConfirmedPublished: Aero Precision, M4E1 Threaded Assembled Upper Receiver - Anodized Black (APAR700201AC), Specifications, the maker, read Oct 3, 2026
Published “Weight(s) 8.65 oz” used
Aero Precision, M4E1 Threaded Assembled Upper Receiver - Anodized Black (APAR700201AC), Specifications, the maker, read Oct 3, 2026 the page, harvested Oct 3, 2026
Its page: "Includes: M4E1 Threaded Upper Receiver in Anodized Black / Port Door and Forward Assist installed". The stripped one is 6.9 oz.
Bore axis above the takedown pin centre0.877 in ± 0.0015 in 22.3 mmConfirmedWorked out: {std.ar15.bore_axis_y}
Worked out 0.8775 in ± 0.0015 in used
{std.ar15.bore_axis_y}, harvested
The standard's: Aero's page says it is "precision machined to work with all mil-spec AR15 parts". Not measured on this upper.
The top rail's surface above the pin line2.09 in ± 0.02 in 53.1 mmCorroboratedPhoto: Aero: the stripped upper's left side, 1000 px
Photo 2.09 in ± 0.02 in used
Aero: the stripped upper's left side, 1000 px, harvested
Scale: pin frame: its own takedown and pivot lug holes, 6.375 in apart (std.ar15.pin_spacing): 119.2 px/in, tilt 0.05°. Read by the rail's tooth tops (the silhouette's highest in each 0.4 in window, between the lugs) above the line through the two holes: 2.090 (2.080 to 2.092); ± is two pixels
Photo 2.085 in ± 0.02 in
Aero: the stripped upper's right side, 1000 px, harvested
Scale: pin frame: its own takedown and pivot lug holes, 6.375 in apart (std.ar15.pin_spacing): 119.0 px/in, tilt −0.11°. Read by as the left photo: 2.085 (2.082 to 2.090)
The discovery report's nearer-to-side-on photo; the other side reads the same within half a pixel.
Read on Aero's own two photos, each in the frame of its own lug holes. The views are level: in the same frames the underside between the lugs reads 0.252 and 0.250, the lower's deck (std.ar15.deck_y, .250).
The rearmost rail slot's centre ahead of the takedown pin1.163 in ± 0.006 in 29.5 mmProvisionalPhoto: Aero's gallery: the stripped receiver's right side, straight on, 1000 x 630
Photo 1.163 in ± 0.006 in used
Aero's gallery: the stripped receiver's right side, straight on, 1000 x 630, harvested
Scale: the two lug holes as the pins (takedown at px 118.9, 430.3; pivot at 877.3, 428.9), std.ar15.pin_spacing apart: 118.96 px/in; the rail's 14 slots fit the standard pitch to 0.1% on it. Read by the top edge's slot floors (x 244 to 878 px, 14 slots): their centres fitted to the standard pitch, rms 0.002 in
How many rail slots14ProvisionalPhoto: Aero's gallery: the stripped receiver's right side, straight on, 1000 x 630
Photo 14 count used
Aero's gallery: the stripped receiver's right side, straight on, 1000 x 630, harvested
Scale: the two lug holes as the pins (takedown at px 118.9, 430.3; pivot at 877.3, 428.9), std.ar15.pin_spacing apart: 118.96 px/in; the rail's 14 slots fit the standard pitch to 0.1% on it. Read by counted along the top edge
Behind the first is a solid run of rail over the charging handle's channel (from rail_rear_x).
The top rail's head: where it begins ahead of the tongue, X (the app draws the head from here)0.416 in ± 0.006 in 10.6 mmProvisionalWorked out: {std.ar15.rail_tongue_shoulder_x}
Worked out 0.4165 in ± 0.006 in used
{std.ar15.rail_tongue_shoulder_x}, from the site owner
Until 2026-10-20 this was the rail's rearmost point (now rail_tongue_rear_x), and the app drew the head at its full width from there, square: the charging handle's T, cut round for a rounded rail end, stood in its corners. Behind this the rail is the standard's tongue (std.ar15.rail_tongue_*), which the receiver's model carries, as the 22RB's does.
The top rail's tongue: its rounded end's rearmost point, X ahead of the takedown pin-0.562 in ± 0.01 in -14.3 mmProvisionalPhoto: Aero's gallery: the stripped receiver's right side, straight on, 1000 x 630
Photo -0.562 in ± 0.01 in used
Aero's gallery: the stripped receiver's right side, straight on, 1000 x 630, harvested
Scale: the two lug holes as the pins (takedown at px 118.9, 430.3; pivot at 877.3, 428.9), std.ar15.pin_spacing apart: 118.96 px/in; the rail's 14 slots fit the standard pitch to 0.1% on it. Read by where the top edge first reaches the teeth's height, x 52 px
The top rail's front end ahead of the takedown pin6.583 in ± 0.01 in 167.2 mmProvisionalPhoto: Aero's gallery: the stripped receiver's right side, straight on, 1000 x 630
Photo 6.583 in ± 0.01 in used
Aero's gallery: the stripped receiver's right side, straight on, 1000 x 630, harvested
Scale: the two lug holes as the pins (takedown at px 118.9, 430.3; pivot at 877.3, 428.9), std.ar15.pin_spacing apart: 118.96 px/in; the rail's 14 slots fit the standard pitch to 0.1% on it. Read by the last tooth's front, x 902 px
Ahead of it the receiver's front is lower, round the barrel nut's threads.
The receiver's rear face behind the takedown pin (negative)-0.621 in ± 0.005 in -15.8 mmConfirmedWorked out: {std.ar15.upper_rear_face_x}
Worked out -0.621 in ± 0.005 in used
{std.ar15.upper_rear_face_x}, harvested
The Army's drawing of the upper (8448524): Aero's is made to work with mil-spec parts.
Photo -0.642 in ± 0.025 in
Aero: the stripped upper's left side, 1000 px, harvested
Scale: pin frame: its own takedown and pivot lug holes, 6.375 in apart (std.ar15.pin_spacing): 119.2 px/in. Read by the silhouette's rear end behind the takedown hole's centre; ± is two pixels and what a near edge reads long from a lens a few feet away
Photo -0.645 in ± 0.025 in
Aero: the stripped upper's right side, 1000 px, harvested
Scale: pin frame: its own takedown and pivot lug holes, 6.375 in apart (std.ar15.pin_spacing): 119.0 px/in. Read by as the left photo
The drawing dimensions the face; the two photos read 0.02 in more, as a silhouette's near edge does, and agree with it within their ±.
The receiver's front face (the end of its barrel-nut thread) ahead of the takedown pin7.036 in ± 0.005 in 178.7 mmConfirmedWorked out: {std.ar15.upper_front_face_x}
Worked out 7.036 in ± 0.005 in used
{std.ar15.upper_front_face_x}, harvested
The Army's drawing: .661 ahead of the pivot lug's hole. Aero: "threaded to accept a standard AR15 barrel nut".
Photo 7.061 in ± 0.025 in
Aero: the stripped upper's left side, 1000 px, harvested
Scale: pin frame: its own takedown and pivot lug holes, 6.375 in apart (std.ar15.pin_spacing): 119.2 px/in. Read by the silhouette's front end 0.686 ahead of the pivot hole's centre; ± is two pixels and the near edge
Photo 7.053 in ± 0.025 in
Aero: the stripped upper's right side, 1000 px, harvested
Scale: pin frame: its own takedown and pivot lug holes, 6.375 in apart (std.ar15.pin_spacing): 119.0 px/in. Read by 0.678 ahead of the pivot hole's centre
The drawing dimensions the face; both photos read 0.02 in more, as at the rear, and agree with it within their ±.
The receiver's underside above the pin line0.248 in ± 0.0015 in 6.3 mmConfirmedWorked out: {std.ar15.deck_y}
Worked out 0.2485 in ± 0.0015 in used
{std.ar15.deck_y}, harvested
It sits on the lower's deck. The two photos read 0.252 and 0.250 between the lugs. (Written 0.25 ± 0.003 until 2026-10-12, a hundredth and a half off its own expression: the model's underside stood that far off a deck drawn on the standard's plane.)
Width of the receiver's body1.18 in ± 0.02 in 30 mmConfirmedStandard: US Army TDP drawing 8448524 (Receiver, Upper), sheet 2, PDF page 109, View G-G
Standard “FORGED DIA 1.18 DIA REF -V-” used
US Army TDP drawing 8448524 (Receiver, Upper), sheet 2, PDF page 109, View G-G
The round body just behind the threaded nose. The A2's 12576280 sheet 2, Section D-D: (1.19) FORGED Ø.
Photo 1.18 in ± 0.06 in
OpticsPlanet's gallery for APAR700201C: the receiver from above, its muzzle end up, 978 x 550, harvested
Scale: the rail's own width in the same photo (std.picatinny.top_width: its lug tops 38.5 px across, 46 px/in at the rail's top) and the barrel-nut thread's (1.25 in by Aero's page: 51 px, 40.8 px/in at the bore's level 1.21 in lower: the lens stood some 10 in above it), what lies between at the scale its depth gives; the part's middle is the rail's (column 472). Read by the lit sloped face beside the rail ends 7 px outside the rail's edge on the left and 8 on the right, at a depth where an inch is 44.5 px: 0.575 and 0.60 from the middle
Clear of the port door's bosses, the forward assist's housing and the deflector, which stand out past it on the right.
The Army's figure for the forging's round body; this receiver read from above has the same across its widest, within what a 978 px photo carries.
The Army's upper receiver is made from a forging whose drawing isn't in the package; the machined drawing gives the round body's forged diameter as a reference, and the A2's agrees within .01. Aero's receiver is the mil-spec pattern (its page: "precision machined to work with all mil-spec AR15 parts"). Its forward assist's housing and the ejection port's door boss stand out past it on the right.
The charging handle's channel above the bore's axis0.856 in ± 0.007 in 21.8 mmConfirmedWorked out: {std.ar15.charging_handle_axis_y} - {.bore_axis_above_pin}
Photo 0.86 in ± 0.05 in
Aero's gallery: the stripped receiver's right side, straight on, 1000 x 630, harvested
Scale: the two lug holes as the pins, std.ar15.pin_spacing apart: 118.96 px/in. Read by the notch in the traced outline's rear end, 1.58 to 1.90 above the pin line: its middle less the bore's 0.8775
Worked out 0.8563 in ± 0.007 in used
{std.ar15.charging_handle_axis_y} - {.bore_axis_above_pin}, from the site owner
Riding on its guide lugs on the channel's tier: std.ar15.charging_handle_axis_y.
A handle rides on its guide lugs on the channel's tier (std.ar15.charging_handle_axis_y, the Army's drawing's); the photo reads the notch's middle, which is the room the handle's block lies in, and agrees within its ±. The receiver had no channel drawn until 2026-10-20.
Its latch's notch in the receiver's rear face, which the handle's latch hooks into: the handle lies at its height.
The charging handle's seat: the front wall of the open notch under the rail's rear end, ahead of the takedown pin0.092 in ± 0.02 in 2.3 mmCorroboratedPhoto: Aero's gallery: the stripped receiver's right side, straight on, 1000 x 630
Photo 0.092 in ± 0.02 in used
Aero's gallery: the stripped receiver's right side, straight on, 1000 x 630, harvested
Scale: the two lug holes as the pins, std.ar15.pin_spacing apart: 118.96 px/in. Read by the notch's front wall in the traced outline's rear end (profiles.side): its flat at x 0.092 from y 1.667 to 1.818, between two corners cut back at 45 degrees to x 0.013 and 0.004; ± is two pixels and the wall's near edge, which a lens a few feet away reads up to 0.02 behind the wall itself
Standard 0.075 in ± 0.015 in
US Army TDP drawing 8448524 (Receiver, Upper), sheet 1 of 2, rev G: side elevation, scaled (the notch has no callout in this view); user-supplied scan (Distribution Statement F, Colt proprietary notice), a copy on file, from the site owner
Scaled, not a callout. On the 6600 px scan the two lug holes, fitted as circles, are 1966 px apart (308.4 px/in over std.ar15.pin_spacing) and the notch's front wall (column 2427.5) is 21.5 px ahead of the takedown hole's centre: 0.070. From the rear face's line, 217 px behind the wall, it is 0.083: the drawing dimensions that face at -0.621 and the scan has it at -0.634 by the holes. Between the two; ± covers both. The notch is 0.31 to 0.32 high there, for the handle's .2985 (drawing 8448518), its front corners cut back 0.06.
This receiver's own notch, where its model's wall is; the Army's drawing, scaled, reads 0.017 less: within both ±.
Where a charging handle stops. The notch is cut across the receiver under the rail's rear end and is open to the rear: the handle's block (its T ahead of the wings, as thick as the shaft) lies in it with its shoulder against this wall, and the shaft runs on through the slot ahead of it. Until 2026-10-05 the handle was placed with its shoulder at the rear face, 0.7 in behind this (that day's review of the models: its whole T hung behind the receiver, over the castle nut). Magpul's photo of a handle in a receiver (a copy on file) has it so: the T's wing astride the rear face, the notch filled to its front wall.
The round body's radius about the bore (the forging's)0.59 in ± 0.01 in 15 mmConfirmedStandard: US Army TDP drawing 8448524 (Receiver, Upper), sheet 2 of 2, rev G: View G-G; user-supplied scan (Distribution Statement F, Colt proprietary notice), a copy on file
Standard “FORGED DIA 1.18 DIA REF -V-” used
US Army TDP drawing 8448524 (Receiver, Upper), sheet 2 of 2, rev G: View G-G; user-supplied scan (Distribution Statement F, Colt proprietary notice), a copy on file, from the site owner
Model 0.6 in ± 0.003 in
the AR-15 CAD reference set the user supplied, Deterrence Dispensed V11: a third-party model of a mil-spec forging, from the site owner
Read by its faces read from the STEP text in the rifle frame its lug holes set (x = 15.0189 - mx, y = my + 6.2992, z = -(mz + 0.8128), inches; a working script), cut at x 1.8: cylindrical faces r 0.6000 about the bore's axis, x -0.43 to 6.59
The drawing's forged figure; the model's is 0.01 more.
The bore the bolt carrier runs in1 in ± 0.005 in 25.4 mmConfirmedStandard: US Army TDP drawing 8448524 (Receiver, Upper), the bore -P- (as 8448522 dimensions the gas tube from it: std.ar15.gas_tube_above_bore); user-supplied scan
Standard “1.000 -P-” used
US Army TDP drawing 8448524 (Receiver, Upper), the bore -P- (as 8448522 dimensions the gas tube from it: std.ar15.gas_tube_above_bore); user-supplied scan, from the site owner
The rail's dovetail, its foot (where the neck begins), Y above the pin line1.885 in ± 0.003 in 47.9 mmCorroboratedModel: the AR-15 CAD reference set the user supplied, Deterrence Dispensed V11: a third-party model of a mil-spec forging
Model 1.885 in ± 0.003 in used
the AR-15 CAD reference set the user supplied, Deterrence Dispensed V11: a third-party model of a mil-spec forging, from the site owner
Read by its faces read from the STEP text in the rifle frame its lug holes set (x = 15.0189 - mx, y = my + 6.2992, z = -(mz + 0.8128), inches; a working script), cut at x 1.8: the plane under the dovetail at y 1.885, z 0.309-0.333; the 45° face from (0.333, 1.885) to (0.418, 1.969)
Photo 1.89 in ± 0.02 in
Aero's gallery: the stripped receiver's right side, 1000 x 630, harvested
Scale: its lug holes, std.ar15.pin_spacing apart: 118.96 px/in. Read by the horizontal edge under the rail, px row 205
The model's face; Aero's photo agrees within its ±.
The rail's dovetail at its foot, half its width0.323 in ± 0.013 in 8.2 mmCorroboratedWorked out: {std.picatinny.bevel_width} / 2 + {std.picatinny.lower_gauge_below_top} - ({.rail_top_above_pin} - {.dovetail_foot_y})
Model 0.333 in ± 0.003 in
the AR-15 CAD reference set the user supplied, Deterrence Dispensed V11: a third-party model of a mil-spec forging, from the site owner
Read by its faces read from the STEP text in the rifle frame its lug holes set (x = 15.0189 - mx, y = my + 6.2992, z = -(mz + 0.8128), inches; a working script), cut at x 1.8: the 45° face's lower end, z 0.333
Worked out 0.323 in ± 0.013 in used
{std.picatinny.bevel_width} / 2 + {std.picatinny.lower_gauge_below_top} - ({.rail_top_above_pin} - {.dovetail_foot_y}), harvested
The standard's lower face carried on at its 45 degrees from the lower gauge line (.748 across, .154 below the rail's top) to the height the reference model has the foot at: the face every other rail on file has (the teeth the app draws on this body, a handguard's own rail) and every clamp's channel is cut to. ± is the gauge line's .010 and the model's .003.
The standard's, since 2026-10-12: a rail's head is MIL-STD-1913's, and the clamps' channels are cut to it (pipeline/blender/lib.py rail_seat). The reference model draws the same face a hundredth further out, at the standard's stated .164 where the ledger has the middle of .164 -.020 (std.picatinny.lower_gauge_below_top): inside the standard's band, and on a body drawn so every clamp stood 0.008 in into the rail along both sides (0.001 cubic inches of an Aimpoint's base). The model isn't authoritative beside the standard; its neck and the foot's height are still its own.
The rail's neck below its dovetail, half its width0.309 in ± 0.003 in 7.8 mmProvisionalModel: the AR-15 CAD reference set the user supplied, Deterrence Dispensed V11: a third-party model of a mil-spec forging
Model 0.309 in ± 0.003 in used
the AR-15 CAD reference set the user supplied, Deterrence Dispensed V11: a third-party model of a mil-spec forging, from the site owner
Read by its faces read from the STEP text in the rifle frame its lug holes set (x = 15.0189 - mx, y = my + 6.2992, z = -(mz + 0.8128), inches; a working script), cut at x 1.8: planar faces z ±0.309 from y 1.700 to 1.885
The rail's neck, where it meets the body below it, Y1.737 in ± 0.02 in 44.1 mmConflictPhoto: Aero's gallery: the M4E1 Threaded stripped upper's left and right sides, each 1000 x 630
Model 1.7 in ± 0.003 in
the AR-15 CAD reference set the user supplied, Deterrence Dispensed V11: a third-party model of a mil-spec forging, from the site owner
Read by its faces read from the STEP text in the rifle frame its lug holes set (x = 15.0189 - mx, y = my + 6.2992, z = -(mz + 0.8128), inches; a working script), cut at x 1.8: the step out from ±0.309 to ±0.319 at y 1.700
Photo 1.737 in ± 0.02 in used
Aero's gallery: the M4E1 Threaded stripped upper's left and right sides, each 1000 x 630, harvested
Scale: the right view's lug holes on the standard pin spacing (std.ar15.pin_spacing: 119.0 px/in); the left view is the same size (its part spans the same 918 px); heights from the rail's top (aero-m4e1-threaded-upper.rail_top_above_pin). Read by the tone down the body at three columns clear of its bump, its pockets and its port: a bright line 42 px below the rail's top in both views (the rail's side dark above it, the body's dark below), the edge where the body begins under the rail's neck
This receiver's own, on Aero's photos of both its sides. The model is a mil-spec forging's, 0.04 lower; the R-ONE handguard's neck, which Aero says this rail blends with, ends 0.377 below the top (1.713).
model and sides differ by 0.037 in beyond what each states it is good to.
The body's upper sides, below the rail's neck: half the width across them0.42 in ± 0.04 in 10.7 mmConflictPhoto: OpticsPlanet's gallery for APAR700201C: the receiver from above, its muzzle end up, 978 x 550
Model 0.319 in ± 0.003 in
the AR-15 CAD reference set the user supplied, Deterrence Dispensed V11: a third-party model of a mil-spec forging, from the site owner
Read by its faces read from the STEP text in the rifle frame its lug holes set (x = 15.0189 - mx, y = my + 6.2992, z = -(mz + 0.8128), inches; a working script), cut at x 1.8: planar faces z ±0.319 from y 1.440 to 1.700, then a .10 fillet to the round body
Photo 0.42 in ± 0.04 in used
OpticsPlanet's gallery for APAR700201C: the receiver from above, its muzzle end up, 978 x 550, harvested
Scale: the rail's own width in the same photo (std.picatinny.top_width: its lug tops 38.5 px across, 46 px/in at the rail's top) and the barrel-nut thread's (1.25 in by Aero's page: 51 px, 40.8 px/in at the bore's level 1.21 in lower: the lens stood some 10 in above it), what lies between at the scale its depth gives; the part's middle is the rail's (column 472). Read by across four rows through the rail: outside the lug tops' edges (columns 453 and 491) comes at once the lit face that slopes out to the body's widest, 6 to 8 px of it each side, with no ledge between: under the rail's neck the body is as wide as the rail's head, within a pixel
This receiver's own: the M4E1's sides under the rail stand out level with the rail's head, a slab where the mil-spec forging the model is of has a waist 0.64 across. The two are different receivers; the conflict is that.
model and above differ by 0.101 in beyond what each states it is good to.
The M4E1's "billet look" (Aero's words for the forging): a flat band each side under the rail, then a flat face sloping out to the round body's widest at the bore's level. The mil-spec forging has a narrow waist here and the round body's top.
The body's upper sides, their lower edge (where the face that slopes out begins), Y1.435 in ± 0.03 in 36.4 mmCorroboratedPhoto: Aero's gallery: the M4E1 Threaded stripped upper's left and right sides, each 1000 x 630
Model 1.44 in ± 0.005 in
the AR-15 CAD reference set the user supplied, Deterrence Dispensed V11: a third-party model of a mil-spec forging, from the site owner
Read by its faces read from the STEP text in the rifle frame its lug holes set (x = 15.0189 - mx, y = my + 6.2992, z = -(mz + 0.8128), inches; a working script), cut at x 1.8: the flat sides' lower end at y 1.440
Photo 1.435 in ± 0.03 in used
Aero's gallery: the M4E1 Threaded stripped upper's left and right sides, each 1000 x 630, harvested
Scale: the right view's lug holes on the standard pin spacing (std.ar15.pin_spacing: 119.0 px/in); the left view is the same size (its part spans the same 918 px); heights from the rail's top (aero-m4e1-threaded-upper.rail_top_above_pin). Read by the same columns: two bright lines 78 and 90 px below the rail's top in the left view (0.655 and 0.756 in), the upper band's dark above them and the sloped face's even grey below: the band ends at the upper line, and a break 0.10 tall lies between it and the sloped face
This receiver's own; the mil-spec forging's model has its sides end 0.005 higher.
The sloped faces' lower edge, where the body is widest, Y0.875 in ± 0.02 in 22.2 mmProvisionalPhoto: Aero's gallery: the M4E1 Threaded stripped upper's left and right sides, each 1000 x 630
Photo 0.875 in ± 0.02 in used
Aero's gallery: the M4E1 Threaded stripped upper's left and right sides, each 1000 x 630, harvested
Scale: the right view's lug holes on the standard pin spacing (std.ar15.pin_spacing: 119.0 px/in); the left view is the same size (its part spans the same 918 px); heights from the rail's top (aero-m4e1-threaded-upper.rail_top_above_pin). Read by the same columns in the left view: the sloped face's even grey (about 100) gives way to the lower band's dark (about 53) between 141 and 147 px below the rail's top, 1.21 in
Level with the bore (0.8775): below it the body is taken to be the forging's round one (body_radius), which the lower receiver's deck and the carrier's bore both need; that half's own shape isn't sourced (a view from an end would show it).
The walls below the round body down to the underside, half the width0.453 in ± 0.003 in 11.5 mmProvisionalModel: the AR-15 CAD reference set the user supplied, Deterrence Dispensed V11: a third-party model of a mil-spec forging
Model 0.453 in ± 0.003 in used
the AR-15 CAD reference set the user supplied, Deterrence Dispensed V11: a third-party model of a mil-spec forging, from the site owner
Read by its faces read from the STEP text in the rifle frame its lug holes set (x = 15.0189 - mx, y = my + 6.2992, z = -(mz + 0.8128), inches; a working script), cut at x 1.8: planar faces z ±0.453 from y 0.250 to 0.458 (inside ±0.251)
The ejection port's length3.125 in ± 0.005 in 79.4 mmConflictStandard: US Army TDP drawing 8448524 (Receiver, Upper), sheet 1 of 2, rev G: side elevation; user-supplied scan (Distribution Statement F, Colt proprietary notice), a copy on file
Standard “3.125; .25 R TRUE 2 PLACES; 1.562 ±.010” used
US Army TDP drawing 8448524 (Receiver, Upper), sheet 1 of 2, rev G: side elevation; user-supplied scan (Distribution Statement F, Colt proprietary notice), a copy on file, from the site owner
Photo 3.111 in ± 0.02 in
Aero's gallery: the stripped receiver's right side, 1000 x 630, harvested
Scale: its lug holes, std.ar15.pin_spacing apart: 118.96 px/in. Read by the dark opening, px 470 to 840
Model 3.097 in ± 0.003 in
the AR-15 CAD reference set the user supplied, Deterrence Dispensed V11: a third-party model of a mil-spec forging, from the site owner
Read by its faces read from the STEP text in the rifle frame its lug holes set (x = 15.0189 - mx, y = my + 6.2992, z = -(mz + 0.8128), inches; a working script), cut at x 1.8: its r .25 end cylinders' axes at x 3.182 and 5.779, plus their radii
The callout; the photo agrees within its ±, the model is 0.028 short.
tdp and model differ by 0.028 in beyond what each states it is good to.
The ejection port's front end ahead of the takedown pin6.036 in ± 0.01 in 153.3 mmConflictWorked out: {.front_face_x} - 1.00in
Worked out 6.036 in ± 0.01 in used
{.front_face_x} - 1.00in, from the site owner
8448524 sheet 1: "1.00" read as from the port's front end to the receiver's front end; a ".042" is drawn beside it: read the other way the port would end at 5.994, which the photo rules out.
Photo 6.062 in ± 0.025 in
Aero's gallery: the stripped receiver's right side, 1000 x 630, harvested
Scale: its lug holes, std.ar15.pin_spacing apart: 118.96 px/in. Read by the opening's front end, px 840
Model 6.029 in ± 0.003 in
the AR-15 CAD reference set the user supplied, Deterrence Dispensed V11: a third-party model of a mil-spec forging, from the site owner
Read by its faces read from the STEP text in the rifle frame its lug holes set (x = 15.0189 - mx, y = my + 6.2992, z = -(mz + 0.8128), inches; a working script), cut at x 1.8: the front end cylinder's axis 5.779 + .25 (1.000 behind its 7.029 face)
The drawing; the photo reads 0.026 more (within its ±).
photo and model differ by 0.033 in beyond what each states it is good to.
The port's lower edge above the pin line, seen from the side (its ends R .25: 0.50 high)0.841 in ± 0.01 in 21.4 mmConflictStandard: 8448524 sheet 1 side view, scaled (not a callout): its lower straight edge at px row 3640 against the lug holes' row 3900 at the sheet's own 309.3 px/in (the lug holes 6.375 apart); R .25 TRUE ends
Standard 0.841 in ± 0.01 in used
8448524 sheet 1 side view, scaled (not a callout): its lower straight edge at px row 3640 against the lug holes' row 3900 at the sheet's own 309.3 px/in (the lug holes 6.375 apart); R .25 TRUE ends, from the site owner
Photo 0.834 in ± 0.02 in
Aero's gallery: the stripped receiver's right side, 1000 x 630, harvested
Scale: its lug holes, std.ar15.pin_spacing apart: 118.96 px/in. Read by the dark opening's bottom, px row 330; its top reads 1.399, 0.06 above the drawing's: the upper wall's inside, seen from slightly above, is in the dark
Model 0.816 in ± 0.005 in
the AR-15 CAD reference set the user supplied, Deterrence Dispensed V11: a third-party model of a mil-spec forging, from the site owner
Read by its faces read from the STEP text in the rifle frame its lug holes set (x = 15.0189 - mx, y = my + 6.2992, z = -(mz + 0.8128), inches; a working script), cut at x 1.8: the slot's lower wall at its seat, y 0.816; the upper 1.317
The drawing's outline at its own scale; the photo agrees within its ±.
drawn and model differ by 0.025 in beyond what each states it is good to.
The port's ends' radius (half its height from the side)0.25 in ± 0.005 in 6.3 mmConfirmedStandard: US Army TDP drawing 8448524 (Receiver, Upper), sheet 1 of 2, rev G: side elevation; user-supplied scan (Distribution Statement F, Colt proprietary notice), a copy on file
Standard “.25 R TRUE 2 PLACES” used
US Army TDP drawing 8448524 (Receiver, Upper), sheet 1 of 2, rev G: side elevation; user-supplied scan (Distribution Statement F, Colt proprietary notice), a copy on file, from the site owner
The forward assist's axis, turned inward toward the front in plan20° ± 1°ConflictStandard: 8448524 sheet 1, the plan view's forward assist section (zone D-7): CL HOLE at 20°, .509 DIA ±.003, .315 DIA ±.001, 1.0285 ±.0050
Standard “20°” used
8448524 sheet 1, the plan view's forward assist section (zone D-7): CL HOLE at 20°, .509 DIA ±.003, .315 DIA ±.001, 1.0285 ±.0050, from the site owner
Model 22.5 deg ± 0.2 deg
the AR-15 CAD reference set the user supplied, Deterrence Dispensed V11: a third-party model of a mil-spec forging, from the site owner
Read by its faces read from the STEP text in the rifle frame its lug holes set (x = 15.0189 - mx, y = my + 6.2992, z = -(mz + 0.8128), inches; a working script), cut at x 1.8: the bore's axis direction (0.924, 0, -0.383)
The drawing wins; the model's 22.5 beside it.
tdp and model differ by 2.5° beyond what each states it is good to.
The forward assist's bore0.509 in ± 0.003 in 12.9 mmConfirmedStandard: 8448524 sheet 1, the plan view's forward assist section
Standard “.509 DIA ±.003” used
8448524 sheet 1, the plan view's forward assist section, from the site owner
The forward assist's bore, how deep its .509 runs from the housing's rear face0.65 in ± 0.01 in 16.5 mmConfirmedStandard: US Army TDP drawing 8448524 (Receiver, Upper), sheet 1 of 2, rev G: the plan view's forward assist section; user-supplied scan (Distribution Statement F, Colt proprietary notice), a copy on file
Standard “.65” used
US Army TDP drawing 8448524 (Receiver, Upper), sheet 1 of 2, rev G: the plan view's forward assist section; user-supplied scan (Distribution Statement F, Colt proprietary notice), a copy on file, from the site owner
Read as the .509 bore's depth along its axis; ahead of it the hole is the .315 (as expo-arms-stripped-upper.fa_bore_depth reads the same view). Until 2026-10-05 the model bored the .509 for 2.0 in, and it came out through the wall under the housing (that day's review of the models: a slit 0.4 by 0.05 in).
The forward assist's inner bore, ahead of the .5090.315 in ± 0.001 in 8 mmConfirmedStandard: US Army TDP drawing 8448524 (Receiver, Upper), sheet 1 of 2, rev G: the plan view's forward assist section; user-supplied scan (Distribution Statement F, Colt proprietary notice), a copy on file
Standard “.315 DIA ±.001” used
US Army TDP drawing 8448524 (Receiver, Upper), sheet 1 of 2, rev G: the plan view's forward assist section; user-supplied scan (Distribution Statement F, Colt proprietary notice), a copy on file, from the site owner
The forward assist bore's rear opening, X-0.395 in ± 0.005 in -10 mmCorroboratedModel: the AR-15 CAD reference set the user supplied, Deterrence Dispensed V11: a third-party model of a mil-spec forging
Model -0.395 in ± 0.005 in used
the AR-15 CAD reference set the user supplied, Deterrence Dispensed V11: a third-party model of a mil-spec forging, from the site owner
Read by its faces read from the STEP text in the rifle frame its lug holes set (x = 15.0189 - mx, y = my + 6.2992, z = -(mz + 0.8128), inches; a working script), cut at x 1.8: the r .25 bore on its axis through (-0.395, 0.879, 1.090)
Photo -0.419 in ± 0.025 in
Aero's gallery: the stripped receiver's right side, 1000 x 630, harvested
Scale: its lug holes, std.ar15.pin_spacing apart: 118.96 px/in. Read by the bore's dark ellipse px u 60-78, v 295-355, centre (69, 325)
The model places the bore in all three; Aero's photo agrees within its ± in x and y.
The forward assist bore's rear opening, out from the middle (Z)1.09 in ± 0.005 in 27.7 mmProvisionalModel: the AR-15 CAD reference set the user supplied, Deterrence Dispensed V11: a third-party model of a mil-spec forging
Model 1.09 in ± 0.005 in used
the AR-15 CAD reference set the user supplied, Deterrence Dispensed V11: a third-party model of a mil-spec forging, from the site owner
Read by its faces read from the STEP text in the rifle frame its lug holes set (x = 15.0189 - mx, y = my + 6.2992, z = -(mz + 0.8128), inches; a working script), cut at x 1.8: the bore's axis at its rear opening
The mil-spec forging's: how far the M4E1's own housing stands out isn't sourced (no end or top view of it on file).
The forward assist housing's radius about its axis (the forging's)0.313 in ± 0.003 in 7.9 mmProvisionalModel: the AR-15 CAD reference set the user supplied, Deterrence Dispensed V11: a third-party model of a mil-spec forging
Model 0.3125 in ± 0.003 in used
the AR-15 CAD reference set the user supplied, Deterrence Dispensed V11: a third-party model of a mil-spec forging, from the site owner
Read by its faces read from the STEP text in the rifle frame its lug holes set (x = 15.0189 - mx, y = my + 6.2992, z = -(mz + 0.8128), inches; a working script), cut at x 1.8: the housing's cylinder r .3125 on the bore's axis, x -0.34 (its rounded rear) to 1.59
The forward assist housing's front end, X1.9 in ± 0.05 in 48.3 mmConflictPhoto: Aero's gallery: the M4E1 Threaded stripped upper's right side, straight on, 1000 x 630
Model 1.59 in ± 0.02 in
the AR-15 CAD reference set the user supplied, Deterrence Dispensed V11: a third-party model of a mil-spec forging, from the site owner
Read by its faces read from the STEP text in the rifle frame its lug holes set (x = 15.0189 - mx, y = my + 6.2992, z = -(mz + 0.8128), inches; a working script), cut at x 1.8: the housing's cylinder ends at x 1.59
Photo 1.9 in ± 0.05 in used
Aero's gallery: the M4E1 Threaded stripped upper's right side, straight on, 1000 x 630, harvested
Scale: its lug holes on the standard pin spacing (std.ar15.pin_spacing): 119.0 px/in. Read by the front of the housing's outline as traced (profiles.side.features, forward_assist_housing: its corner at column 345), where the deflector's ridge begins
This receiver's own housing, which runs on into its deflector; the model is a mil-spec forging's, whose round housing ends 0.3 in sooner.
model and side differ by 0.31 in beyond what each states it is good to.
The forward assist housing's outer face at the receiver's rear, out from the middle (Z)1.67 in ± 0.1 in 42.4 mmProvisionalPhoto: OpticsPlanet's gallery for APAR700201C: the receiver from above, its muzzle end up, 978 x 550
Photo 1.67 in ± 0.1 in used
OpticsPlanet's gallery for APAR700201C: the receiver from above, its muzzle end up, 978 x 550, harvested
Scale: the rail's own width in the same photo (std.picatinny.top_width: its lug tops 38.5 px across, 46 px/in at the rail's top) and the barrel-nut thread's (1.25 in by Aero's page: 51 px, 40.8 px/in at the bore's level 1.21 in lower: the lens stood some 10 in above it), what lies between at the scale its depth gives; the part's middle is the rail's (column 472). Read by the part's right edge row by row against the white: a straight line from column 505 at row 345 to 541 at row 441 (0.375 px a row), which at the bore's level is 0.81 in out at x 1.67 and 1.69 out at x -0.68; taken at the receiver's rear face
The M4E1's housing is a block, flat-faced: from above its outer face is a straight line from here in toward the deflector, 20.5 degrees to the bore's line (the forward assist's own angle, fa_axis_angle), and its rear is cut square to that. The mil-spec forging's is a round boss 0.31 about the forward assist's axis (fa_housing_r), 1.40 out.
The forward assist housing's outer face, its upper edge (where the face that slopes down from the body meets it), Y1.2 in ± 0.03 in 30.5 mmProvisionalPhoto: Aero's gallery: the M4E1 Threaded stripped upper's right side, straight on, 1000 x 630
Photo 1.2 in ± 0.03 in used
Aero's gallery: the M4E1 Threaded stripped upper's right side, straight on, 1000 x 630, harvested
Scale: its lug holes on the standard pin spacing (std.ar15.pin_spacing): 119.0 px/in, the pin line at row 430.3. Read by the tone down the housing at six columns from x -0.07 to 1.61: the lit face (110 to 125) ends at a dark line 1.23 above the pins at its rear and 1.17 at its front
From the right the housing is three bands: a lit face from its top (1.41) down to here, a mid-toned one, the outer face, and a dark one under it that slopes back in to the body. Flat faces with edges between: a block, where the forging's is a round boss.
The forward assist housing's outer face, its lower edge (where the face that slopes back in to the body begins), Y0.92 in ± 0.03 in 23.4 mmProvisionalPhoto: Aero's gallery: the M4E1 Threaded stripped upper's right side, straight on, 1000 x 630
Photo 0.92 in ± 0.03 in used
Aero's gallery: the M4E1 Threaded stripped upper's right side, straight on, 1000 x 630, harvested
Scale: its lug holes on the standard pin spacing (std.ar15.pin_spacing): 119.0 px/in, the pin line at row 430.3. Read by the same columns: the mid-toned face (about 80) gives way to the dark one (about 48) 0.95 above the pins at its rear and 0.89 at its front
The brass deflector's reach out from the middle (Z)1.47 in ± 0.1 in 37.3 mmConflictPhoto: OpticsPlanet's gallery for APAR700201C: the receiver from above, its muzzle end up, 978 x 550
Model 1.25 in ± 0.05 in
the AR-15 CAD reference set the user supplied, Deterrence Dispensed V11: a third-party model of a mil-spec forging, from the site owner
Read by its faces read from the STEP text in the rifle frame its lug holes set (x = 15.0189 - mx, y = my + 6.2992, z = -(mz + 0.8128), inches; a working script), cut at x 1.8: its faces (r 5.0 and r 1.5 tilted cylinders) reach z 1.20-1.30 over x 2.06-2.99, y 0.95-1.70
Photo 1.47 in ± 0.1 in used
OpticsPlanet's gallery for APAR700201C: the receiver from above, its muzzle end up, 978 x 550, harvested
Scale: the rail's own width in the same photo (std.picatinny.top_width: its lug tops 38.5 px across, 46 px/in at the rail's top) and the barrel-nut thread's (1.25 in by Aero's page: 51 px, 40.8 px/in at the bore's level 1.21 in lower: the lens stood some 10 in above it), what lies between at the scale its depth gives; the part's middle is the rail's (column 472). Read by the part's right edge row by row: the deflector's point at column 534, row 303, 62 px from the middle at a depth (0.85 in below the rail's top) where an inch is 42.3 px
This receiver's own, from above; the model is a mil-spec forging's, whose deflector is a smaller boss. They are different receivers.
model and above differ by 0.22 in beyond what each states it is good to.
From above it is a triangle: a long face from the housing's front out to its point and a short one back in to the port's rear end.
The brass deflector's point (where it reaches furthest out), X2.72 in ± 0.15 in 69.1 mmProvisionalPhoto: OpticsPlanet's gallery for APAR700201C: the receiver from above, its muzzle end up, 978 x 550
Photo 2.72 in ± 0.15 in used
OpticsPlanet's gallery for APAR700201C: the receiver from above, its muzzle end up, 978 x 550, harvested
Scale: the rail's own width in the same photo (std.picatinny.top_width: its lug tops 38.5 px across, 46 px/in at the rail's top) and the barrel-nut thread's (1.25 in by Aero's page: 51 px, 40.8 px/in at the bore's level 1.21 in lower: the lens stood some 10 in above it), what lies between at the scale its depth gives; the part's middle is the rail's (column 472); along the receiver, the rail's own ends (aero-m4e1-threaded-upper.rail_rear_x, rail_front_x) about the photo's middle row. Read by the row of the deflector's point, 303, where the rail's middle (x 3.07) is row 288
The side view has the deflector from x 1.88 to 2.95 with its ridge's top at 2.56: the point is nearer its front.
The brass deflector's point (where it reaches furthest out), Y1.16 in ± 0.06 in 29.5 mmProvisionalPhoto: Aero's gallery: the M4E1 Threaded stripped upper's right side, straight on, 1000 x 630
Photo 1.16 in ± 0.06 in used
Aero's gallery: the M4E1 Threaded stripped upper's right side, straight on, 1000 x 630, harvested
Scale: its lug holes on the standard pin spacing (std.ar15.pin_spacing): 119.0 px/in, the pin line at row 430.3. Read by the tone down the deflector at x 2.53: its lit face (102 to 135) runs from its top edge (1.65) down to 1.17, a darker one below it; at x 2.78 the lit face is gone
Its faces are flat and meet at this point: a large one above and behind it, lit in the side view, a dark one ahead of it and one below.
The cam pin's boss on the left side, its middle, X5.14 in ± 0.02 in 130.6 mmProvisionalPhoto: Aero's gallery: the M4E1 Threaded stripped upper in FDE Cerakote, APAR700202C, its left side, straight on, 1000 x 630: the same forging in the colour that shows relief
Photo 5.14 in ± 0.02 in used
Aero's gallery: the M4E1 Threaded stripped upper in FDE Cerakote, APAR700202C, its left side, straight on, 1000 x 630: the same forging in the colour that shows relief, harvested
Scale: its own lug holes on the standard pin spacing (std.ar15.pin_spacing): the takedown hole's centre at (883.8, 424.6) px, the pivot hole's near rim centred 123.5: 119.2 px/in ± 0.3 (the black left view in the same pose, 05049cf3016d: 119.17); the frame checked on the underside (395 px: 0.248 for the drawing's 0.2485), the rail's top (176 px: 2.086 for 2.09) and the front face (45 px: 7.03 for 7.036). The holes are on the centre plane and the wall read is about half an inch nearer the lens: the ± covers it. Read by rows 229 to 243: its upper edge runs 242.5 to 301 px and its ends at their widest 227.3 to 316.2, both centred 271.75; its outer face 249.5 to 290.5 (rows 256 to 279), centred 270: 271.3 px taken, (883.8 - 271.3) / 119.2
A raised block over the pocket the cam pin's head turns into. From the side: an upright outer face, a lit face above it sloping back to the band under the rail, and a lit face running down to the band ahead and behind (its two ends, wider than the outer face).
The cam pin's boss, its upright outer face, half its length0.172 in ± 0.012 in 4.4 mmProvisionalPhoto: Aero's gallery: the M4E1 Threaded stripped upper in FDE Cerakote, APAR700202C, its left side, straight on, 1000 x 630: the same forging in the colour that shows relief
Photo 0.172 in ± 0.012 in used
Aero's gallery: the M4E1 Threaded stripped upper in FDE Cerakote, APAR700202C, its left side, straight on, 1000 x 630: the same forging in the colour that shows relief, harvested
Scale: its own lug holes on the standard pin spacing (std.ar15.pin_spacing): the takedown hole's centre at (883.8, 424.6) px, the pivot hole's near rim centred 123.5: 119.2 px/in ± 0.3 (the black left view in the same pose, 05049cf3016d: 119.17); the frame checked on the underside (395 px: 0.248 for the drawing's 0.2485), the rail's top (176 px: 2.086 for 2.09) and the front face (45 px: 7.03 for 7.036). The holes are on the centre plane and the wall read is about half an inch nearer the lens: the ± covers it. Read by rows 256, 262, 268, 274 and 279: the face's even tone (141 to 147) between 249.5 and 290.5 px at every row, darker flanks outside it: 41 px / 119.2 / 2
The cam pin's boss, its outer face's upper edge (and its ends' lower edge), Y1.519 in ± 0.012 in 38.6 mmProvisionalPhoto: Aero's gallery: the M4E1 Threaded stripped upper in FDE Cerakote, APAR700202C, its left side, straight on, 1000 x 630: the same forging in the colour that shows relief
Photo 1.519 in ± 0.012 in used
Aero's gallery: the M4E1 Threaded stripped upper in FDE Cerakote, APAR700202C, its left side, straight on, 1000 x 630: the same forging in the colour that shows relief, harvested
Scale: its own lug holes on the standard pin spacing (std.ar15.pin_spacing): the takedown hole's centre at (883.8, 424.6) px, the pivot hole's near rim centred 123.5: 119.2 px/in ± 0.3 (the black left view in the same pose, 05049cf3016d: 119.17); the frame checked on the underside (395 px: 0.248 for the drawing's 0.2485), the rail's top (176 px: 2.086 for 2.09) and the front face (45 px: 7.03 for 7.036). The holes are on the centre plane and the wall read is about half an inch nearer the lens: the ± covers it. Read by columns 258 to 286: the lit face above (183 to 208) gives way to the outer face (146 to 149) between 242 and 246 px, the half level at 243.5; rows 241 and 245 left and right of the face: its ends' lit faces stop at the same height (the band's tone below, and a shadow under the rear one): (424.6 - 243.5) / 119.2
The cam pin's boss, its outer face's lower edge, where it runs out on the body's sloped face, Y1.21 in ± 0.012 in 30.7 mmProvisionalPhoto: Aero's gallery: the M4E1 Threaded stripped upper in FDE Cerakote, APAR700202C, its left side, straight on, 1000 x 630: the same forging in the colour that shows relief
Photo 1.21 in ± 0.012 in used
Aero's gallery: the M4E1 Threaded stripped upper in FDE Cerakote, APAR700202C, its left side, straight on, 1000 x 630: the same forging in the colour that shows relief, harvested
Scale: its own lug holes on the standard pin spacing (std.ar15.pin_spacing): the takedown hole's centre at (883.8, 424.6) px, the pivot hole's near rim centred 123.5: 119.2 px/in ± 0.3 (the black left view in the same pose, 05049cf3016d: 119.17); the frame checked on the underside (395 px: 0.248 for the drawing's 0.2485), the rail's top (176 px: 2.086 for 2.09) and the front face (45 px: 7.03 for 7.036). The holes are on the centre plane and the wall read is about half an inch nearer the lens: the ± covers it. Read by columns 258 to 286: the outer face (140 to 143) gives way to the sloped face (186) between 278 and 282 px, the half level at 280.4: (424.6 - 280.4) / 119.2
The flanks beside the outer face narrow to nothing here (rows 256 to 279: the left one from 12.5 px wide to none), as the flanks of an upright face do where it meets a face sloping out to it. The script takes the outer face to stand where the sloped face is at this height: 0.068 in out from the band with the section as drawn (side_half_width, side_bottom_y, shoulder_bottom_y, width).
The cam pin's boss, its upper edge on the band under the rail, Y1.648 in ± 0.012 in 41.9 mmProvisionalPhoto: Aero's gallery: the M4E1 Threaded stripped upper in FDE Cerakote, APAR700202C, its left side, straight on, 1000 x 630: the same forging in the colour that shows relief
Photo 1.648 in ± 0.012 in used
Aero's gallery: the M4E1 Threaded stripped upper in FDE Cerakote, APAR700202C, its left side, straight on, 1000 x 630: the same forging in the colour that shows relief, harvested
Scale: its own lug holes on the standard pin spacing (std.ar15.pin_spacing): the takedown hole's centre at (883.8, 424.6) px, the pivot hole's near rim centred 123.5: 119.2 px/in ± 0.3 (the black left view in the same pose, 05049cf3016d: 119.17); the frame checked on the underside (395 px: 0.248 for the drawing's 0.2485), the rail's top (176 px: 2.086 for 2.09) and the front face (45 px: 7.03 for 7.036). The holes are on the centre plane and the wall read is about half an inch nearer the lens: the ± covers it. Read by columns 248 to 286: the band (127 to 131) gives way to the lit face (188 to 195) between 226 and 230 px, the half level at 228.2: (424.6 - 228.2) / 119.2
The cam pin's boss, its upper edge, half its length0.245 in ± 0.015 in 6.2 mmProvisionalPhoto: Aero's gallery: the M4E1 Threaded stripped upper in FDE Cerakote, APAR700202C, its left side, straight on, 1000 x 630: the same forging in the colour that shows relief
Photo 0.245 in ± 0.015 in used
Aero's gallery: the M4E1 Threaded stripped upper in FDE Cerakote, APAR700202C, its left side, straight on, 1000 x 630: the same forging in the colour that shows relief, harvested
Scale: its own lug holes on the standard pin spacing (std.ar15.pin_spacing): the takedown hole's centre at (883.8, 424.6) px, the pivot hole's near rim centred 123.5: 119.2 px/in ± 0.3 (the black left view in the same pose, 05049cf3016d: 119.17); the frame checked on the underside (395 px: 0.248 for the drawing's 0.2485), the rail's top (176 px: 2.086 for 2.09) and the front face (45 px: 7.03 for 7.036). The holes are on the centre plane and the wall read is about half an inch nearer the lens: the ± covers it. Read by row 229: lit from 242.5 to 301 px (half levels): 58.5 px / 119.2 / 2
The cam pin's boss, its two ends at their lower edge, half the length between them0.373 in ± 0.015 in 9.5 mmProvisionalPhoto: Aero's gallery: the M4E1 Threaded stripped upper in FDE Cerakote, APAR700202C, its left side, straight on, 1000 x 630: the same forging in the colour that shows relief
Photo 0.373 in ± 0.015 in used
Aero's gallery: the M4E1 Threaded stripped upper in FDE Cerakote, APAR700202C, its left side, straight on, 1000 x 630: the same forging in the colour that shows relief, harvested
Scale: its own lug holes on the standard pin spacing (std.ar15.pin_spacing): the takedown hole's centre at (883.8, 424.6) px, the pivot hole's near rim centred 123.5: 119.2 px/in ± 0.3 (the black left view in the same pose, 05049cf3016d: 119.17); the frame checked on the underside (395 px: 0.248 for the drawing's 0.2485), the rail's top (176 px: 2.086 for 2.09) and the front face (45 px: 7.03 for 7.036). The holes are on the centre plane and the wall read is about half an inch nearer the lens: the ± covers it. Read by rows 239 to 243: the lit faces at its ends reach 227.3 px ahead and 316.2 behind (half levels; from the upper edge's ends they run out on straight diagonals, 15 px along for 12 down, both sides alike): 88.9 px / 119.2 / 2
The cam pin's boss, how far along the body each flank of its outer face runs before it reaches the band0.135 in ± 0.02 in 3.4 mmProvisionalPhoto: Aero's gallery: the M4E1 Threaded stripped upper in FDE Cerakote, APAR700202C, its left side, straight on, 1000 x 630: the same forging in the colour that shows relief
Photo 0.135 in ± 0.02 in used
Aero's gallery: the M4E1 Threaded stripped upper in FDE Cerakote, APAR700202C, its left side, straight on, 1000 x 630: the same forging in the colour that shows relief, harvested
Scale: its own lug holes on the standard pin spacing (std.ar15.pin_spacing): the takedown hole's centre at (883.8, 424.6) px, the pivot hole's near rim centred 123.5: 119.2 px/in ± 0.3 (the black left view in the same pose, 05049cf3016d: 119.17); the frame checked on the underside (395 px: 0.248 for the drawing's 0.2485), the rail's top (176 px: 2.086 for 2.09) and the front face (45 px: 7.03 for 7.036). The holes are on the centre plane and the wall read is about half an inch nearer the lens: the ± covers it. Read by the dark flank ahead of the outer face is 12.5 px wide at row 256, 8.5 at 262, 6 at 268, 3.5 at 274, 2 at 277 and gone by 280.4: a straight line, 14.7 px at the sloped face's upper edge (row 252), 0.123 in; the one behind it 17.5 px there, 0.147, with the boss's own shadow in it. The middle of the two
Each flank is taken as one upright flat from the outer face's edge to the band (the left one's edge on the sloped face is a straight line in the photo, as such a flat's is). The two aren't told apart: the rear one's reading has a cast shadow in it.
The flat pad low on the left wall, its rear end, X3.077 in ± 0.02 in 78.2 mmProvisionalPhoto: Aero's gallery: the M4E1 Threaded stripped upper in FDE Cerakote, APAR700202C, its left side, straight on, 1000 x 630: the same forging in the colour that shows relief
Photo 3.077 in ± 0.02 in used
Aero's gallery: the M4E1 Threaded stripped upper in FDE Cerakote, APAR700202C, its left side, straight on, 1000 x 630: the same forging in the colour that shows relief, harvested
Scale: its own lug holes on the standard pin spacing (std.ar15.pin_spacing): the takedown hole's centre at (883.8, 424.6) px, the pivot hole's near rim centred 123.5: 119.2 px/in ± 0.3 (the black left view in the same pose, 05049cf3016d: 119.17); the frame checked on the underside (395 px: 0.248 for the drawing's 0.2485), the rail's top (176 px: 2.086 for 2.09) and the front face (45 px: 7.03 for 7.036). The holes are on the centre plane and the wall read is about half an inch nearer the lens: the ± covers it. Read by rows 352, 370 and 388: the pad's tone (137 to 148) falls to the wall's behind it at 518.2, 516.5 and 516.5 px (half levels), and a shadow 12 px wide lies on the wall behind that end at row 388 (127 for the wall's 139): 517 px, (883.8 - 517) / 119.2
An upright flat along the foot of the left wall, from over the magazine well back past the bolt catch, in three lengths: the middle one stands further out and reaches higher. Raised, not sunk: its upper edge is a crease with no shadow under it (columns 200 to 480: the sloped under-face's 120 steps to 130 and climbs to 145, as the plain lug wall's does behind the pad at 376 px), its rear end and the middle length's rear end throw a shadow rearward onto what is behind them (light from the upper front), and a buyer's photo of it on a rifle from above (d4da1497f915) has the middle length's foot lower in the picture than its neighbours'. How far it stands out is in no view: the script takes each length to stand where the body as drawn is at its upper edge's height.
The flat pad low on the left wall, its front end, X6.202 in ± 0.02 in 157.5 mmProvisionalPhoto: Aero's gallery: the M4E1 Threaded stripped upper in FDE Cerakote, APAR700202C, its left side, straight on, 1000 x 630: the same forging in the colour that shows relief
Photo 6.202 in ± 0.02 in used
Aero's gallery: the M4E1 Threaded stripped upper in FDE Cerakote, APAR700202C, its left side, straight on, 1000 x 630: the same forging in the colour that shows relief, harvested
Scale: its own lug holes on the standard pin spacing (std.ar15.pin_spacing): the takedown hole's centre at (883.8, 424.6) px, the pivot hole's near rim centred 123.5: 119.2 px/in ± 0.3 (the black left view in the same pose, 05049cf3016d: 119.17); the frame checked on the underside (395 px: 0.248 for the drawing's 0.2485), the rail's top (176 px: 2.086 for 2.09) and the front face (45 px: 7.03 for 7.036). The holes are on the centre plane and the wall read is about half an inch nearer the lens: the ± covers it. Read by rows 352 and 370: the pad's tone begins at 144 and 145 px (half levels; at row 370 a band 8 px wide of a tone between lies ahead of it, an end face or its round, not drawn): 144.5 px, (883.8 - 144.5) / 119.2
The flat pad low on the left wall, the upper edge of its front and rear lengths, Y0.662 in ± 0.015 in 16.8 mmProvisionalPhoto: Aero's gallery: the M4E1 Threaded stripped upper in FDE Cerakote, APAR700202C, its left side, straight on, 1000 x 630: the same forging in the colour that shows relief
Photo 0.662 in ± 0.015 in used
Aero's gallery: the M4E1 Threaded stripped upper in FDE Cerakote, APAR700202C, its left side, straight on, 1000 x 630: the same forging in the colour that shows relief, harvested
Scale: its own lug holes on the standard pin spacing (std.ar15.pin_spacing): the takedown hole's centre at (883.8, 424.6) px, the pivot hole's near rim centred 123.5: 119.2 px/in ± 0.3 (the black left view in the same pose, 05049cf3016d: 119.17); the frame checked on the underside (395 px: 0.248 for the drawing's 0.2485), the rail's top (176 px: 2.086 for 2.09) and the front face (45 px: 7.03 for 7.036). The holes are on the centre plane and the wall read is about half an inch nearer the lens: the ± covers it. Read by columns 200, 250, 300, 440 and 480 (7 px wide each): the dark under-face (120 to 122) steps to the pad's tone (129 to 136) between 344 and 348 px in all five, the half level at 345.7: (424.6 - 345.7) / 119.2
Behind the pad the plain wall's own crease is at 376 px, 0.408 in above the pin line (columns 560 to 780), with one even dark tone above it up to the widest line: a flat face sloping in, where the model has the mil-spec forging's round body meeting its lug walls at 0.50. Not changed in this pass (the part's first gap): with the body flat there the pad would stand 0.075 in out from the lug wall, and with the round one it is 0.096.
The flat pad low on the left wall, its middle length's rear end, X4.05 in ± 0.015 in 102.9 mmProvisionalPhoto: Aero's gallery: the M4E1 Threaded stripped upper in FDE Cerakote, APAR700202C, its left side, straight on, 1000 x 630: the same forging in the colour that shows relief
Photo 4.05 in ± 0.015 in used
Aero's gallery: the M4E1 Threaded stripped upper in FDE Cerakote, APAR700202C, its left side, straight on, 1000 x 630: the same forging in the colour that shows relief, harvested
Scale: its own lug holes on the standard pin spacing (std.ar15.pin_spacing): the takedown hole's centre at (883.8, 424.6) px, the pivot hole's near rim centred 123.5: 119.2 px/in ± 0.3 (the black left view in the same pose, 05049cf3016d: 119.17); the frame checked on the underside (395 px: 0.248 for the drawing's 0.2485), the rail's top (176 px: 2.086 for 2.09) and the front face (45 px: 7.03 for 7.036). The holes are on the centre plane and the wall read is about half an inch nearer the lens: the ± covers it. Read by rows 340 and 344 (above the other lengths' upper edge): the middle length's tone (136 to 141) falls to the under-face's (121) at 401.5 and 400.7 px (half levels); at row 370 a shadow lies behind that end, 401 to 407 px (130 for 143): 401 px, (883.8 - 401) / 119.2
The flat pad low on the left wall, its middle length's front end, X4.585 in ± 0.015 in 116.5 mmProvisionalPhoto: Aero's gallery: the M4E1 Threaded stripped upper in FDE Cerakote, APAR700202C, its left side, straight on, 1000 x 630: the same forging in the colour that shows relief
Photo 4.585 in ± 0.015 in used
Aero's gallery: the M4E1 Threaded stripped upper in FDE Cerakote, APAR700202C, its left side, straight on, 1000 x 630: the same forging in the colour that shows relief, harvested
Scale: its own lug holes on the standard pin spacing (std.ar15.pin_spacing): the takedown hole's centre at (883.8, 424.6) px, the pivot hole's near rim centred 123.5: 119.2 px/in ± 0.3 (the black left view in the same pose, 05049cf3016d: 119.17); the frame checked on the underside (395 px: 0.248 for the drawing's 0.2485), the rail's top (176 px: 2.086 for 2.09) and the front face (45 px: 7.03 for 7.036). The holes are on the centre plane and the wall read is about half an inch nearer the lens: the ± covers it. Read by rows 340 and 344: the under-face's 119 to 121 rises to the middle length's 136 to 138 at 337.5 and 337 px (half levels): 337.3 px, (883.8 - 337.3) / 119.2
The flat pad low on the left wall, its middle length's upper edge, Y0.743 in ± 0.015 in 18.9 mmProvisionalPhoto: Aero's gallery: the M4E1 Threaded stripped upper in FDE Cerakote, APAR700202C, its left side, straight on, 1000 x 630: the same forging in the colour that shows relief
Photo 0.743 in ± 0.015 in used
Aero's gallery: the M4E1 Threaded stripped upper in FDE Cerakote, APAR700202C, its left side, straight on, 1000 x 630: the same forging in the colour that shows relief, harvested
Scale: its own lug holes on the standard pin spacing (std.ar15.pin_spacing): the takedown hole's centre at (883.8, 424.6) px, the pivot hole's near rim centred 123.5: 119.2 px/in ± 0.3 (the black left view in the same pose, 05049cf3016d: 119.17); the frame checked on the underside (395 px: 0.248 for the drawing's 0.2485), the rail's top (176 px: 2.086 for 2.09) and the front face (45 px: 7.03 for 7.036). The holes are on the centre plane and the wall read is about half an inch nearer the lens: the ± covers it. Read by columns 360 and 380 (7 px wide each): the dark under-face (120 to 122) steps to the pad's tone (137 to 139) between 334 and 338 px, the half level at 336: (424.6 - 336) / 119.2
What it goes with
By the way it mounts, and the figures each part on file states: a part whose figures say it doesn't fit is left out, and one whose fit can't be checked from what is published is marked. A check is against published figures, not a guarantee.
AR-15 receiver pins
- Lower receivers
- Aero Precision M4E1 complete lower, A2 grip and M4 stock, Aero Precision M4E1 Stripped Lower Receiver, Battle Arms Development Workhorse stripped lower, BCM MK2 AR-15 Lower Receiver, Bear Creek Arsenal BC-15 Multi Caliber, Lower Receiver, Black Anodized, Geissele Automatics Super Duty AR-15 Lower Receiver - Stripped Lower, Palmetto State Armory AR-15 "Stealth" Stripped Lower Receiver
Barrel extension
- Barrels
- Aero Precision 16" 5.56 CMV barrel, mid-length, BCM Standard 11.5" Carbine Barrel, Stripped, BCM Standard 14.5" Mid Length Barrel, Stripped, BCM Standard 16" Mid Length Barrel, Stripped, Bear Creek Arsenal BC-15 5.56 NATO, 16" Parkerized M4 Barrel, 1:7 Twist, Mid-Length Gas System, Daniel Defense CHF Chrome Lined 5.56 AR-15 Barrel - Carbine - Government - 10.3", Faxon Firearms Duty Series Pencil Profile 16" Mid-Length 5.56 NATO AR15 Barrel, Geissele Automatics CHF Chrome Lined Barrel - 5.56 - 13.9", Geissele Automatics CHF Chrome Lined Barrel - 5.56 - 14.5", Geissele Automatics CHF Chrome Lined Barrel - 5.56 - 16", Rosco Manufacturing Bloodline 10.5" M4 5.56 NATO, Rosco Manufacturing Bloodline 11.5" M4 5.56 NATO, Rosco Manufacturing Bloodline 12.5" M4 5.56 NATO
Handguard mount
- Handguards
- Aero Precision AR15 10.3" R-ONE M-LOK handguard, Aero Precision AR15 12.7" R-ONE M-LOK handguard, Aero Precision AR15 15" Enhanced M-LOK Handguard, Gen 2, Aero Precision AR15 15" R-ONE M-LOK handguard, Aero Precision AR15 15" S-ONE M-LOK Handguard, Aero Precision AR15 16.6" R-ONE M-LOK handguard, Aero Precision AR15 7.3" R-ONE M-LOK handguard, Aero Precision AR15 9.3" R-ONE M-LOK handguard, BCM MCMR-10 (M-LOK® Compatible* Modular Rail), BCM MCMR-13 (M-LOK® Compatible* Modular Rail), BCM MCMR-15 (M-LOK® Compatible* Modular Rail), BCM PMCR (Polymer M-LOK® Compatible Rail)* Carbine Length-BLACK, BCM PMCR (Polymer M-LOK® Compatible Rail)* Mid Length-BLACK, Expo Arms Free Float AR-15 Handguard - M-LOK - 15", Geissele Automatics 10.5" Super Modular Rail MK16 M-LOK, Geissele Automatics 13.5" Super Modular Rail MK16 M-LOK, Geissele Automatics 15" Super Modular Rail MK16 M-LOK, Magpul MOE SL® Hand Guard, Carbine-Length – AR15/M4, Magpul MOE SL® Hand Guard, Mid-Length – AR15/M4, Magpul MOE® M-LOK® Hand Guard, Carbine-Length – AR15/M4, Magpul MOE® M-LOK® Hand Guard, Mid-Length – AR15/M4, MAS Defense 12.62" NERO M-LOK FREE FLOAT, MAS Defense 15" NERO M-LOK FREE FLOAT, MAS Defense 9.87" NERO M-LOK FREE FLOAT, Midwest Industries AR-15/M16 Two Piece Drop-In Handguard, M-LOK® (Carbine), Midwest Industries AR-15/M16 Two Piece Drop-In Handguard, M-LOK® (Mid-Length), Midwest Industries Combat Rail One Piece Free Float Handguard, M-LOK™ (15")
- Barrel nuts
- BCM G.I. Barrel Nut - AR15, Spike's Tactical Delta Ring Assembly w/Mil-Spec Barrel Nut
Bolt carrier channel
Charging handle channel
- Charging handles
- Aero Precision AR15/M4 5.56 charging handle, BCM Ambidextrous MK2 Charging Handle - Large Latch (5.56mm/.223), Radian Weapons AR-15 / M16 Raptor-LT Ambidextrous Charging Handle, Radian Weapons Raptor Ambidextrous Charging Handle AR15/M16, Radian Weapons Raptor-SD Ambidextrous Charging Handle AR15/M16
Picatinny rail (MIL-STD-1913)
- Red dot mounts
- Aimpoint Duty RDS One-piece TNP Mount, 30 mm, Aimpoint LRP (Lever Release Picatinny) Mount with 39 mm Spacer, for Micro, Aimpoint One-piece Torsion Nut Mount and Spacer, 39 mm, Geissele Super Precision T1 Mount - 1.93" Height, Geissele Super Precision T1 Mount - Absolute Co-Witness, Geissele Super Precision T1 Mount - Lower 1/3 Co-Witness, Holosun 1.63 in lower 1/3 co-witness pedestal mount (HS-MOUNT-AR-RISER-ARO), Midwest Industries MK2 QD T2 Aimpoint Mount, Low, Midwest Industries MK2 QD T2 Aimpoint Mount, Lower 1/3 Cowitness, Midwest Industries MK2 QD T2 Aimpoint Mount, NV 2.26 in Height, Reptilia DOT MOUNT FOR AIMPOINT® MICRO – 1.93″ HEIGHT, Reptilia DOT MOUNT FOR AIMPOINT® MICRO – LOWER 1/3 (39MM HEIGHT), Scalarworks LEAP/01 Aimpoint Micro T-2 quick-detach mount, 1.42 in, Scalarworks LEAP/01 Aimpoint Micro T-2 quick-detach mount, 1.57 in, Scalarworks LEAP/01 Aimpoint Micro T-2 quick-detach mount, 1.93 in, Scalarworks LEAP/02 Aimpoint Micro T-2 quick-detach mount, 2.26 in, SIG Sauer M1913 I-BEAM Mount, 1.41 in absolute co-witness, SIG Sauer See-Through Riser Mount, 1.41 in absolute co-witness, Unity Tactical FAST Micro Mount, 2.26 in optical centerline
- Optics
- Aimpoint Patrol Rifle Optic (PRO) Red Dot Reflex Sight - QRP2 Mount, EOTECH HWS EXPS3 holographic weapon sight, 1-Dot Speed Ring, Holosun HS510C Open Reflex MRS Solar QD Mount
- Lights
- Olight Baldr S BL, Streamlight ProTac Rail Mount HL-X, SureFire Mini Scout Light Pro, SureFire Scout Light Pro Dual Fuel
- Backup sights
- Daniel Defense A1.5 Fixed Rear Sight, Daniel Defense Rail Mounted Fixed Front Sight, Magpul MBUS 3 Sight – Front, Magpul MBUS 3 Sight – Rear, Magpul MBUS Pro Sight – Front, Magpul MBUS Pro Sight – Rear
- Magnifiers
- EOTECH G33 Magnifier, STS Mount, EOTECH G45 Magnifier, STS Mount, Holosun HM3X 3× magnifier with flip mount
- Scope mounts
- Primary Arms Deluxe AR-15 Scope Mount - 30mm, Primary Arms SLx Cantilever 30mm Mount - 1.5", Reptilia AUS™ MOUNT - 30MM DIAMETER - 39MM HEIGHT, Scalarworks LEAP/08 quick-detach scope mount, 30 mm, 1.57 in, SIG SAUER ALPHA-MSR scope mount, 30 mm, Vortex Sport Cantilever 30mm Mount
Prices on file
Each seller's latest reading of its own page: before tax and shipping, and not a quote. The pages are read again every night.
- Aero Precision $150.00 Anodized Black Nov 21, 2026, stock not said
- Aero Precision $150.00 OD Green Anodized Nov 21, 2026, stock not said
- Aero Precision $150.00 Kodiak Brown Anodized Nov 21, 2026, stock not said
- Aero Precision $170.00 FDE Cerakote Nov 21, 2026, stock not said
- Aero Precision $175.00 Anodized Black, Assembled Nov 21, 2026, stock not said
- Aero Precision $195.00 Sniper Grey Cerakote, Assembled Nov 21, 2026, stock not said
- AR15Discounts $174.99 Sniper Grey Cerakote, Assembled Nov 21, 2026, out of stock that day
- Dirty Bird Industries $174.99 Sniper Grey Cerakote, Assembled Nov 21, 2026, out of stock that day