Light
SureFire Mini Scout Light Pro
SureFire's 3-volt Scout Light Pro with the Z68 click tail cap: 500 lumens on the one 123A it comes with. Its Low-Profile Mount pivots, and it comes with a mount for a MIL-STD-1913 rail (the M-1913-S) and one for M-LOK (the M-MLOK-S). Black (M340C-BK-PRO) and tan (M340C-TN-PRO).

- Weight
- 3.65 oz ± 0.005 oz Conflictpublished: SureFire, Mini Scout Light Pro, specifications, the maker, read Oct 19, 2026Its sources span 3.65 oz to 4.15 oz.
- Lowest price
- $269.99 at Primary Arms, read Nov 21, 2026 (Black)
- Maker's number
- M340C-BK-PRO
- Colours
- Black, Tan
- Drawn as
- modelled
- Maker's page
- surefire.com
In “Aero 5.56 carbine, fitted out”, a build on the start page, in place of its SureFire Scout Light Pro Dual Fuel.
Its figures
Every figure the site draws and checks it by, with where it came from. Open one for each source's reading, and why one is used where they differ.
Overall length4.1 in ± 0.05 in 104.1 mmConfirmedPublished: SureFire, Mini Scout Light Pro, specifications, the maker, read Oct 19, 2026
Published “LENGTH 4.1 in (10.4 cm)” used
SureFire, Mini Scout Light Pro, specifications, the maker, read Oct 19, 2026 the page, harvested Oct 19, 2026
The tail cap's rear face to the bezel's front face: the sheet's drawing puts its 4.1 in dimension's extension lines at the outline's two ends (rows 95.75 and 2586.25 of the 600 dpi rendering, against the outline's 98 and 2588). The sheet's table repeats it: "LENGTH 4.1 in (10.4 cm)".
Head (bezel) diameter1.125 in ± 0.0005 in 28.6 mmConfirmedPublished: SureFire, Mini Scout Light Pro, specifications, the maker, read Oct 19, 2026
Published “BEZEL DIAMETER 1.125 in (2.9 cm)” used
SureFire, Mini Scout Light Pro, specifications, the maker, read Oct 19, 2026 the page, harvested Oct 19, 2026
The bezel's smooth front section ahead of its scalloped ring (the drawing's 1.125 in dimension is across it). The universal manual's table gives the KE1H bezel the same: "BEZEL DIAMETER 1.125 in (2.9 cm)". Tried against the published length on the sheet's drawing: at the length's scale (606.6 px/in, stroke centres) the bezel reads 1.113 in (1.1% under); on SureFire's right profile photo the length's and the bezel's scales agree within 1% too (the tube, the tail cap and the ring by their ratio to the bezel land within 0.02 in of the drawing's).
Body diameter0.746 in ± 0.008 in 18.9 mmProvisionalPhoto: SureFire's product information sheet, M340C-PRO.pdf page 2, BODY SPECS: the outline drawing rendered at 600 dpi
Photo 0.746 in ± 0.008 in used
SureFire's product information sheet, M340C-PRO.pdf page 2, BODY SPECS: the outline drawing rendered at 600 dpi, harvested
Scale: the published length between the outline's ends: 606.6 px/in at the strokes' centres; the axis at row 657.75 (the middle of every section whose two edges show). Read by twice the top edge's height over the axis between the bands (the stroke at rows 430 to 433, columns 909 to 1244): 226.25 px; the lower edge there is under the mount's plate as drawn. By hand on the pixel values
Not published. The tube between the two bands, under the mount's plate (MH31: one 123A, 17 mm across, inside it). SureFire's right profile photo reads 0.759 by its ratio to the bezel (265 px over 393), the lit edges kept: 0.013 more than the drawing.
Tail cap's shroud diameter0.989 in ± 0.013 in 25.1 mmProvisionalPhoto: SureFire's product information sheet (M340C-PRO.pdf), page 2, BODY SPECS: the outline drawing, rendered at 600 dpi
Photo 0.989 in ± 0.013 in used
SureFire's product information sheet (M340C-PRO.pdf), page 2, BODY SPECS: the outline drawing, rendered at 600 dpi, harvested
Scale: scale from surefire-m340c-mini-scout-light-pro.length = 4.1 in (x-extent 2487 px → 606.6 px/in). Read by height (tooth tops, max over 0.05 in windows) along x [0.05, 0.38] of the traced outline (tools/trace.py); the Z68 tail cap's shroud, on the drawing
Not published. The Z68 tail cap's shroud, on the drawing; the right profile photo reads 1.002 by its ratio to the bezel, the left 0.982 (each photo yawed a little, opposite ways).
Diameter of the body's two bands0.786 in ± 0.011 in 20 mmProvisionalPhoto: SureFire's product information sheet (M340C-PRO.pdf), page 2, BODY SPECS: the outline drawing, rendered at 600 dpi
Photo 0.786 in ± 0.011 in used
SureFire's product information sheet (M340C-PRO.pdf), page 2, BODY SPECS: the outline drawing, rendered at 600 dpi, harvested
Scale: scale from surefire-m340c-mini-scout-light-pro.length = 4.1 in (x-extent 2487 px → 606.6 px/in). Read by height (tooth tops, max over 0.05 in windows) along x [1.03, 1.28] of the traced outline (tools/trace.py); the rear band, under which the rear ear hangs, on the drawing
Not published. The rear band (the rear ear hangs under it); the front band, which the front ear hangs under, reads the same on the drawing.
Diameter of the scalloped ring behind the bezel (as drawn)1.174 in ± 0.015 in 29.8 mmProvisionalPhoto: SureFire's product information sheet (M340C-PRO.pdf), page 2, BODY SPECS: the outline drawing, rendered at 600 dpi
Photo 1.174 in ± 0.015 in used
SureFire's product information sheet (M340C-PRO.pdf), page 2, BODY SPECS: the outline drawing, rendered at 600 dpi, harvested
Scale: scale from surefire-m340c-mini-scout-light-pro.length = 4.1 in (x-extent 2487 px → 606.6 px/in). Read by height (tooth tops, max over 0.05 in windows) along x [3.08, 3.27] of the traced outline (tools/trace.py); the faceted ring behind the bezel, on the drawing
Not published. Wider than the published bezel diameter, which is the smooth section ahead of it. SureFire's right profile photo reads it 1.182 by its ratio to the bezel; the Dual Fuel's ring read 1.178 on its own photo.
The tail cap shroud's cone, 0.45 in off the axis, ahead of the rear face0.457 in ± 0.006 in 11.6 mmProvisionalPhoto: SureFire's product information sheet (M340C-PRO.pdf), page 2, BODY SPECS: the outline drawing, rendered at 600 dpi
Photo 0.457 in ± 0.006 in used
SureFire's product information sheet (M340C-PRO.pdf), page 2, BODY SPECS: the outline drawing, rendered at 600 dpi, harvested
Scale: scale from surefire-m340c-mini-scout-light-pro.length = 4.1 in (x-extent 2487 px → 606.6 px/in). Read by x_min in x [0.35, 0.55] in y [0.445, 0.455] of the traced outline (tools/trace.py); the tail cap shroud's cone, where the top edge comes down through 0.45 in off the axis
Rear edge of the Picatinny mount's plate (the rear band's front edge), ahead of the rear face1.317 in ± 0.016 in 33.5 mmProvisionalPhoto: SureFire's product information sheet (M340C-PRO.pdf), page 2, BODY SPECS: the outline drawing, rendered at 600 dpi
Photo 1.317 in ± 0.016 in used
SureFire's product information sheet (M340C-PRO.pdf), page 2, BODY SPECS: the outline drawing, rendered at 600 dpi, harvested
Scale: scale from surefire-m340c-mini-scout-light-pro.length = 4.1 in (x-extent 2487 px → 606.6 px/in). Read by x_min in x [1.2, 1.4] in y [0.38, 0.39] of the traced outline (tools/trace.py); the rear band's front edge, where the top edge comes down through 0.385 in off the axis: the plate's rear edge is drawn on it
The drawing draws the plate's rear edge on the rear band's front edge, and SureFire's right profile photo shows them in line. The plate is the M-1913-S's: its length (.clamp_front_x less this) is the Dual Fuel's within 0.02 in.
Front edge of the Picatinny mount's plate (the front band's rear edge), ahead of the rear face1.902 in ± 0.023 in 48.3 mmProvisionalPhoto: SureFire's product information sheet (M340C-PRO.pdf), page 2, BODY SPECS: the outline drawing, rendered at 600 dpi
Photo 1.902 in ± 0.023 in used
SureFire's product information sheet (M340C-PRO.pdf), page 2, BODY SPECS: the outline drawing, rendered at 600 dpi, harvested
Scale: scale from surefire-m340c-mini-scout-light-pro.length = 4.1 in (x-extent 2487 px → 606.6 px/in). Read by x_max in x [1.8, 2.0] in y [0.38, 0.39] of the traced outline (tools/trace.py); the front band's rear edge, where the top edge rises through 0.385 in off the axis: the plate's front edge is drawn on it
Step onto the head's rear, ahead of the rear face2.324 in ± 0.028 in 59 mmProvisionalPhoto: SureFire's product information sheet (M340C-PRO.pdf), page 2, BODY SPECS: the outline drawing, rendered at 600 dpi
Photo 2.324 in ± 0.028 in used
SureFire's product information sheet (M340C-PRO.pdf), page 2, BODY SPECS: the outline drawing, rendered at 600 dpi, harvested
Scale: scale from surefire-m340c-mini-scout-light-pro.length = 4.1 in (x-extent 2487 px → 606.6 px/in). Read by x_min in x [2.2, 2.45] in y [0.455, 0.465] of the traced outline (tools/trace.py); the step onto the head's rear, where the top edge rises through 0.46 in off the axis
The scalloped ring's front edge (where the bezel's smooth section begins), ahead of the rear face3.28 in ± 0.04 in 83.3 mmProvisionalPhoto: SureFire's product information sheet (M340C-PRO.pdf), page 2, BODY SPECS: the outline drawing, rendered at 600 dpi
Photo 3.28 in ± 0.04 in used
SureFire's product information sheet (M340C-PRO.pdf), page 2, BODY SPECS: the outline drawing, rendered at 600 dpi, harvested
Scale: scale from surefire-m340c-mini-scout-light-pro.length = 4.1 in (x-extent 2487 px → 606.6 px/in). Read by x_max in x [3.1, 3.4] in y [0.57, 0.58] of the traced outline (tools/trace.py); the faceted ring's front edge, where the top edge comes down through 0.575 in off the axis
The scalloped ring's rear edge, ahead of the rear face2.967 in ± 0.006 in 75.4 mmProvisionalPhoto: SureFire's product information sheet, M340C-PRO.pdf page 2, BODY SPECS: the outline drawing rendered at 600 dpi
Photo 2.967 in ± 0.006 in used
SureFire's product information sheet, M340C-PRO.pdf page 2, BODY SPECS: the outline drawing rendered at 600 dpi, harvested
Scale: the published length between the outline's ends: 606.6 px/in at the strokes' centres, the rear face at column 100; the axis at row 657.75. Read by where the top edge rises through 0.575 in off the axis out of the groove behind the ring (row 308.9, about column 1900); by hand on the pixel values
Flats round the scalloped ring behind the bezel6ProvisionalPhoto: SureFire's product information sheet, M340C-PRO.pdf page 2, BODY SPECS: the outline drawing rendered at 600 dpi
Photo 6 count used
SureFire's product information sheet, M340C-PRO.pdf page 2, BODY SPECS: the outline drawing rendered at 600 dpi, harvested
Scale: the published length between the outline's ends: 606.6 px/in at the strokes' centres, the rear face at column 100; the axis at row 657.75. Read by the middle flat's two edges and its neighbours' inner edges down columns 1915 to 2065, against a six-fold and an eight-fold ring's
Counted on the drawing: one flat square to its line of sight (rows 557.5 to 758.5 at column 1930) and its two neighbours, whose inner edges stand 245 px off the axis and whose outer edges run out at the ring's silhouette: a flat 16.4 degrees either side of its middle (its distance from the axis over the ring's radius), centred 58 to 60 degrees from the middle one, which only a six-fold ring puts there (eight would put them at 45). Primary Arms' photographs of the tan light show the same flats.
Where the ring's flats are read at their rear, ahead of the rear face3.017 in ± 0.003 in 76.6 mmProvisionalPhoto: SureFire's product information sheet, M340C-PRO.pdf page 2, BODY SPECS: the outline drawing rendered at 600 dpi
Photo 3.017 in ± 0.003 in used
SureFire's product information sheet, M340C-PRO.pdf page 2, BODY SPECS: the outline drawing rendered at 600 dpi, harvested
Scale: the published length between the outline's ends: 606.6 px/in at the strokes' centres, the rear face at column 100; the axis at row 657.75. Read by column 1930, chosen near the flat's rear end, clear of the ring's rear round
Where the ring's flats are read at their front, ahead of the rear face3.239 in ± 0.003 in 82.3 mmProvisionalPhoto: SureFire's product information sheet, M340C-PRO.pdf page 2, BODY SPECS: the outline drawing rendered at 600 dpi
Photo 3.239 in ± 0.003 in used
SureFire's product information sheet, M340C-PRO.pdf page 2, BODY SPECS: the outline drawing rendered at 600 dpi, harvested
Scale: the published length between the outline's ends: 606.6 px/in at the strokes' centres, the rear face at column 100; the axis at row 657.75. Read by column 2065, chosen near the flat's front end, clear of the ring's front chamfer
A ring flat's distance from the axis at its rear reading0.563 in ± 0.004 in 14.3 mmProvisionalPhoto: SureFire's product information sheet, M340C-PRO.pdf page 2, BODY SPECS: the outline drawing rendered at 600 dpi
Photo 0.5627 in ± 0.004 in used
SureFire's product information sheet, M340C-PRO.pdf page 2, BODY SPECS: the outline drawing rendered at 600 dpi, harvested
Scale: the published length between the outline's ends: 606.6 px/in at the strokes' centres, the rear face at column 100; the axis at row 657.75. Read by the middle flat's edges at rows 557.5 and 758.5 down column 1930 (stroke centres): half its chord 100.5 px on the ring's radius of 355.75 (rows 302 and 1013.5): sqrt(355.75^2 - 100.5^2) = 341.3 px
Each flat leans: it is deeper at its rear than at its front (the drawing's facet narrows forward, 201 px across at column 1930 and 145 at 2065).
A ring flat's distance from the axis at its front reading0.574 in ± 0.004 in 14.6 mmProvisionalPhoto: SureFire's product information sheet, M340C-PRO.pdf page 2, BODY SPECS: the outline drawing rendered at 600 dpi
Photo 0.5742 in ± 0.004 in used
SureFire's product information sheet, M340C-PRO.pdf page 2, BODY SPECS: the outline drawing rendered at 600 dpi, harvested
Scale: the published length between the outline's ends: 606.6 px/in at the strokes' centres, the rear face at column 100; the axis at row 657.75. Read by the middle flat's edges at rows 585.5 and 730.5 down column 2065: half its chord 72.5 px on the ring's radius of 355.75: 348.3 px
Holes round the Z68 tail cap's shroud4ProvisionalPhoto: Primary Arms, M340C-TN-PRO_01: the tan body from behind, 2200 x 1467
Photo 4 count used
Primary Arms, M340C-TN-PRO_01: the tan body from behind, 2200 x 1467, harvested
Scale: none: a count. Read by the holes round the shroud's rim, counted all the way round
Counted on Primary Arms' photograph of the tan light from behind (ff47d3e34a2f), where the shroud's rim shows all the way round: four, evenly spaced. The drawing and SureFire's two profile photos each show two, about 45 degrees either side of the line of sight, as four so turned show.
The shroud's holes' centres, ahead of the rear face0.11 in ± 0.004 in 2.8 mmProvisionalPhoto: SureFire's product information sheet, M340C-PRO.pdf page 2, BODY SPECS: the outline drawing rendered at 600 dpi
Photo 0.11 in ± 0.004 in used
SureFire's product information sheet, M340C-PRO.pdf page 2, BODY SPECS: the outline drawing rendered at 600 dpi, harvested
Scale: the published length between the outline's ends: 606.6 px/in at the strokes' centres, the rear face at column 100; the axis at row 657.75. Read by the two holes' outlines (ovals, seen 44.5 degrees off square) from column 130 to 203.5 at their middles (rows 448 and 868.5): their middle, 166.75; by hand
Diameter of the shroud's holes0.121 in ± 0.004 in 3.1 mmProvisionalPhoto: SureFire's product information sheet, M340C-PRO.pdf page 2, BODY SPECS: the outline drawing rendered at 600 dpi
Photo 0.121 in ± 0.004 in used
SureFire's product information sheet, M340C-PRO.pdf page 2, BODY SPECS: the outline drawing rendered at 600 dpi, harvested
Scale: the published length between the outline's ends: 606.6 px/in at the strokes' centres, the rear face at column 100; the axis at row 657.75. Read by the ovals' length along the body between their strokes' centres, columns 130 to 203.5: 73.5 px; by hand
Along the body, where a round hole seen from the side keeps its whole diameter; across, the drawing's ovals are 0.67 of it, as a round hole 45 degrees off square shows.
Front face of the pivot's front ear, ahead of the rear face2.029 in ± 0.006 in 51.5 mmProvisionalPhoto: SureFire's product information sheet, M340C-PRO.pdf page 2, BODY SPECS: the outline drawing rendered at 600 dpi
Photo 2.029 in ± 0.006 in used
SureFire's product information sheet, M340C-PRO.pdf page 2, BODY SPECS: the outline drawing rendered at 600 dpi, harvested
Scale: the published length between the outline's ends: 606.6 px/in at the strokes' centres, the rear face at column 100. Read by the ear's front face, the vertical stroke at column 1330.5 over rows 560 to 850 (the plate's front edge and the front band's rear edge are at 1255.5): by hand on the pixel values
Front face of the pivot screw's head (the Z93 shoulder screw), ahead of the rear face2.178 in ± 0.006 in 55.3 mmProvisionalPhoto: SureFire's product information sheet, M340C-PRO.pdf page 2, BODY SPECS: the outline drawing rendered at 600 dpi
Photo 2.178 in ± 0.006 in used
SureFire's product information sheet, M340C-PRO.pdf page 2, BODY SPECS: the outline drawing rendered at 600 dpi, harvested
Scale: the published length between the outline's ends: 606.6 px/in at the strokes' centres. Read by the head's front face, the strokes at columns 1418.5 and 1424.5 over rows 750 to 850: their middle, 1421.5; by hand
Diameter of the pivot screw's head0.346 in ± 0.008 in 8.8 mmProvisionalPhoto: SureFire's product information sheet, M340C-PRO.pdf page 2, BODY SPECS: the outline drawing rendered at 600 dpi
Photo 0.346 in ± 0.008 in used
SureFire's product information sheet, M340C-PRO.pdf page 2, BODY SPECS: the outline drawing rendered at 600 dpi, harvested
Scale: the published length between the outline's ends: 606.6 px/in. Read by the head's two edges down column 1400, the strokes at rows 648 to 651 and 858 to 861: 210 px between their centres; by hand
A disc about the pivot's axis, which runs along the body: any view round the body sees its whole diameter, whatever way the drawing's mount is swung.
Top of the mount's barrel, below the body's axis0.43 in ± 0.004 in 10.9 mmProvisionalPhoto: SureFire's gallery, M340C-BK-PRO-profileR: the light on its Picatinny mount, right side, on white, 1500 x 1500
Photo 0.43 in ± 0.004 in used
SureFire's gallery, M340C-BK-PRO-profileR: the light on its Picatinny mount, right side, on white, 1500 x 1500, harvested
Scale: frame from the reviewed holes cone, clamp_rear, clamp_front, head_step, ring_front (355.3 px/in, rms 0.009 in over 5 points). Read by −y_max of the traced outline (tools/trace.py); the top of the mount's barrel, under the white gap between it and the tube
A white gap of 0.07 in shows between the tube and the barrel. The left profile photo reads 0.407 and its ears' lowest point 0.750: the pivot 0.04 nearer the axis than in the right one, as a mount swung some 20 degrees out of the photo's plane would show it (its plate there reads as long as in the right one, so it isn't foreshortened along its length: the body is turned on the pivot). The right one, whose plate is square to the lens, is taken.
Lowest point of the pivot's ears, below the body's axis0.788 in ± 0.005 in 20 mmProvisionalPhoto: SureFire's gallery, M340C-BK-PRO-profileR: the light on its Picatinny mount, right side, on white, 1500 x 1500
Photo 0.788 in ± 0.005 in used
SureFire's gallery, M340C-BK-PRO-profileR: the light on its Picatinny mount, right side, on white, 1500 x 1500, harvested
Scale: frame from the reviewed holes cone, clamp_rear, clamp_front, head_step, ring_front (355.3 px/in, rms 0.009 in over 5 points). Read by −y_min of the traced outline (tools/trace.py); the rear ear's lowest point (the front one's reads 0.004 less)
The ears are round about the pivot and flush with the mount's barrel between them (SureFire's rear three-quarter photos). With .pivot_top_below_axis it gives the pivot: its axis midway between the two (.pivot_centre_below_axis).
Rear end of the mount's barrel (the rear ear's front face), ahead of the rear face1.315 in ± 0.006 in 33.4 mmProvisionalPhoto: SureFire's gallery, M340C-BK-PRO-profileR: the light on its Picatinny mount, right side, on white, 1500 x 1500
Photo 1.315 in ± 0.006 in used
SureFire's gallery, M340C-BK-PRO-profileR: the light on its Picatinny mount, right side, on white, 1500 x 1500, harvested
Scale: frame from the reviewed holes cone, clamp_rear, clamp_front, head_step, ring_front (355.3 px/in, rms 0.009 in over 5 points). Read by x_max of the traced outline (tools/trace.py); the rear ear's front face, against the barrel's rear end
Front end of the mount's barrel (the front ear's rear face), ahead of the rear face1.92 in ± 0.008 in 48.8 mmProvisionalPhoto: SureFire's gallery, M340C-BK-PRO-profileR: the light on its Picatinny mount, right side, on white, 1500 x 1500
Photo 1.92 in ± 0.008 in used
SureFire's gallery, M340C-BK-PRO-profileR: the light on its Picatinny mount, right side, on white, 1500 x 1500, harvested
Scale: frame from the reviewed holes cone, clamp_rear, clamp_front, head_step, ring_front (355.3 px/in, rms 0.009 in over 5 points). Read by x_min of the traced outline (tools/trace.py); the front ear's rear face, against the barrel's front end
With .barrel_rear_x, the barrel is 0.60 in long between the ears on this light's photo; the Dual Fuel's photo reads its 0.553. The ears are the body's and the barrel the mount's, so one of the two readings is off by about 0.05 in, or the two bodies' ears stand apart differently and the mount's barrel is not what fills the gap; the model draws this light's.
The pivot's axis below the body's axis0.609 in ± 0.005 in 15.5 mmProvisionalWorked out: ({.pivot_top_below_axis} + {.ear_bottom_below_axis}) / 2
Worked out 0.609 in ± 0.005 in used
({.pivot_top_below_axis} + {.ear_bottom_below_axis}) / 2, harvested
Diameter of the mount's barrel (and of the ears round it)0.36 in ± 0.012 in 9.1 mmProvisionalWorked out: {surefire-scout-light-pro-dual-fuel.ear_bottom_below_axis} - {surefire-scout-light-pro-dual-fuel.pivot_top_below_axis}
Worked out 0.36 in ± 0.012 in used
{surefire-scout-light-pro-dual-fuel.ear_bottom_below_axis} - {surefire-scout-light-pro-dual-fuel.pivot_top_below_axis}, harvested
Worked out 0.358 in ± 0.01 in
{.ear_bottom_below_axis} - {.pivot_top_below_axis}, harvested
The same mount's figure on file; this light's reading agrees within the ±.
The mount's own: the M-1913-S's barrel is the Dual Fuel's (the same mount). This light's right profile reads 0.358 between the barrel's top and the ears' lowest point, 0.002 from it.
The body's axis above the mounting face (the rail's top, the handguard's face)0.19 in ± 0.06 in 4.8 mmProvisionalWorked out: {surefire-scout-light-pro-dual-fuel.axis_above_mount}
Worked out 0.19 in ± 0.06 in used
{surefire-scout-light-pro-dual-fuel.axis_above_mount}, harvested
For the M-1913-S hanging straight from its pivot, as SureFire photographs it: the body stands beside the rail and its axis is at the pivot's height above the rail's top, which is the mount's (the Dual Fuel's ledger has how it was read, and why it is the most it can be). On the M-MLOK-S the body stands over the face instead: .mlok_pivot_above_face plus .pivot_centre_below_axis.
The rail's centre line below the body's axis, the Picatinny mount hanging straight (as photographed)1.081 in ± 0.035 in 27.5 mmProvisionalWorked out: {.pivot_centre_below_axis} + {surefire-scout-light-pro-dual-fuel.rail_centre_below_axis} - ({surefire-scout-light-pro-dual-fuel.pivot_top_below_axis} + {surefire-scout-light-pro-dual-fuel.ear_bottom_below_axis}) / 2
Worked out 1.081 in ± 0.035 in used
{.pivot_centre_below_axis} + {surefire-scout-light-pro-dual-fuel.rail_centre_below_axis} - ({surefire-scout-light-pro-dual-fuel.pivot_top_below_axis} + {surefire-scout-light-pro-dual-fuel.ear_bottom_below_axis}) / 2, harvested
The pivot's place under this body, and the rail's centre line where the M-1913-S holds it below its pivot (the Dual Fuel's 1.123 less its pivot's 0.651). This light's own photo has the plate 0.04 in longer below the pivot than the Dual Fuel's (.jaw_bottom_below_axis): if the rail's far edge follows the jaw, its centre line is 0.02 in further than this.
Underside of the Picatinny mount's moving jaw, below the body's axis1.618 in ± 0.007 in 41.1 mmConflictPhoto: SureFire's gallery, M340C-BK-PRO-profileR: the light on its Picatinny mount, right side, 1500 x 1500
Photo 1.618 in ± 0.007 in used
SureFire's gallery, M340C-BK-PRO-profileR: the light on its Picatinny mount, right side, 1500 x 1500, harvested
Scale: the `clamp` trace's frame for this photo: five of the body's steps placed where the drawing's trace has them (355.3 px/in). Read by −y_min of the traced outline (tools/trace.py): the jaw's underside, the mount screw's slotted head under it (to row 1145) boxed out
Worked out 1.578 in ± 0.02 in
{.pivot_centre_below_axis} + {surefire-scout-light-pro-dual-fuel.jaw_bottom_below_axis} - ({surefire-scout-light-pro-dual-fuel.pivot_top_below_axis} + {surefire-scout-light-pro-dual-fuel.ear_bottom_below_axis}) / 2, harvested
This light's own photo of its own mount, square to the lens, and its left profile agrees with it. The Dual Fuel's reading is kept beside it: 0.04 in shorter, outside both ±.
surefire-right and dual-fuel differ by 0.04 in beyond what each states it is good to.
Read two ways that don't agree: on this light's own right profile, and as the Dual Fuel's jaw below its pivot carried onto this light's pivot. This light's right profile has the plate's end 1.009 in below the pivot, and its left one (by its own bezel, so a little large) 1.038; the Dual Fuel's two read 0.969. Either the Dual Fuel's photographs see its plate swung some 15 degrees out of their plane, or the mount was changed between them. The model draws this light's plate as its own photo has it.
Thickness of the Picatinny mount's plate (its SF face to its rail side)0.22 in ± 0.05 in 5.6 mmProvisionalWorked out: {surefire-scout-light-pro-dual-fuel.clamp_thickness}
Worked out 0.22 in ± 0.05 in used
{surefire-scout-light-pro-dual-fuel.clamp_thickness}, harvested
How far the Picatinny mount's jaws reach below the rail's top0.1 in ± 0.04 in 2.5 mmProvisionalWorked out: {surefire-scout-light-pro-dual-fuel.jaw_reach}
Worked out 0.1 in ± 0.04 in used
{surefire-scout-light-pro-dual-fuel.jaw_reach}, harvested
Width of the recoil bar under the Picatinny mount's plate (along the rail)0.2 in ± 0.01 in 5.1 mmProvisionalWorked out: {surefire-scout-light-pro-dual-fuel.recoil_bar_width}
Worked out 0.2 in ± 0.01 in used
{surefire-scout-light-pro-dual-fuel.recoil_bar_width}, harvested
Picatinny mount: how far the fixed hook's block reaches past the pivot's axis, away from the rail's centre0.07 in ± 0.02 in 1.8 mmProvisionalWorked out: {surefire-scout-light-pro-dual-fuel.hook_back_beyond_pivot}
Worked out 0.07 in ± 0.02 in used
{surefire-scout-light-pro-dual-fuel.hook_back_beyond_pivot}, harvested
Picatinny mount: diameter of the mount screw's head, at the moving jaw's end0.19 in ± 0.02 in 4.8 mmProvisionalWorked out: {surefire-scout-light-pro-dual-fuel.mount_screw_head_diameter}
Worked out 0.19 in ± 0.02 in used
{surefire-scout-light-pro-dual-fuel.mount_screw_head_diameter}, harvested
Picatinny mount: how far the mount screw's head stands out of the moving jaw0.04 in ± 0.01 in 1 mmProvisionalWorked out: {surefire-scout-light-pro-dual-fuel.mount_screw_head_proud}
Worked out 0.04 in ± 0.01 in used
{surefire-scout-light-pro-dual-fuel.mount_screw_head_proud}, harvested
The Dual Fuel's figure; this light's right profile shows the slotted head 11 to 13 px (0.03 to 0.04 in) under the jaw, the same.
Weight of the Picatinny mount sold apart (M-1913-S)1.6 oz ± 0.05 ozConfirmedWorked out: {surefire-scout-light-pro-dual-fuel.rail_mount_weight}
Worked out 1.6 oz ± 0.05 oz used
{surefire-scout-light-pro-dual-fuel.rail_mount_weight}, harvested
The same mount's figure, on its own page (the Dual Fuel's ledger quotes it). Whether the light's 3.65 oz counts a mount isn't stated.
M-LOK slots its mount's lugs span1ProvisionalWorked out: {surefire-scout-light-pro-dual-fuel.lugs}
Worked out 1 count used
{surefire-scout-light-pro-dual-fuel.lugs}, harvested
The M-MLOK-S's: two screws with T-nuts about 0.64 in apart, both in one slot (worked out from its photos in the Dual Fuel's ledger). The manual: "M-MLOK-S: See Magpul instructions enclosed"; those instructions aren't on file.
Reach inside the handguard (below the mounting face, tightened)No value yetMissingNo source yet
Not sourced, for the M-MLOK-S on either light: the Magpul sheet the manual says is enclosed isn't on file.
M-LOK mount: its two screws, centre to centre0.64 in ± 0.07 in 16.3 mmProvisionalWorked out: {surefire-scout-light-pro-dual-fuel.mlok_screw_spacing}
Worked out 0.64 in ± 0.07 in used
{surefire-scout-light-pro-dual-fuel.mlok_screw_spacing}, harvested
M-LOK mount: width of its base0.4 in ± 0.06 in 10.2 mmProvisionalWorked out: {surefire-scout-light-pro-dual-fuel.mlok_base_width}
Worked out 0.4 in ± 0.06 in used
{surefire-scout-light-pro-dual-fuel.mlok_base_width}, harvested
M-LOK mount: the pivot's axis above its mounting face0.4 in ± 0.1 in 10.2 mmProvisionalWorked out: {surefire-scout-light-pro-dual-fuel.mlok_pivot_above_face}
Worked out 0.4 in ± 0.1 in used
{surefire-scout-light-pro-dual-fuel.mlok_pivot_above_face}, harvested
M-LOK mount: thickness of its base0.15 in ± 0.05 in 3.8 mmProvisionalWorked out: {surefire-scout-light-pro-dual-fuel.mlok_base_thickness}
Worked out 0.15 in ± 0.05 in used
{surefire-scout-light-pro-dual-fuel.mlok_base_thickness}, harvested
M-LOK mount: diameter of the counterbore round each screw0.31 in ± 0.04 in 7.9 mmProvisionalWorked out: {surefire-scout-light-pro-dual-fuel.mlok_counterbore_diameter}
Worked out 0.31 in ± 0.04 in used
{surefire-scout-light-pro-dual-fuel.mlok_counterbore_diameter}, harvested
Weight of the M-LOK mount sold apart (M-MLOK-S)1.6 oz ± 0.05 ozConfirmedWorked out: {surefire-scout-light-pro-dual-fuel.mlok_mount_weight}
Worked out 1.6 oz ± 0.05 oz used
{surefire-scout-light-pro-dual-fuel.mlok_mount_weight}, harvested
Overall width (with its mount and switch)No value yetMissingNo source yet
Not published, and it changes as the mount is swivelled.
How far the lens sits behind the bezel's front face0.08 in ± 0.04 in 2 mmProvisionalWorked out: An assumption for the drawing, not a reading: no view on file shows the bezel in section (the Dual Fuel's script assumed the same).
Worked out 0.08 in ± 0.04 in used
An assumption for the drawing, not a reading: no view on file shows the bezel in section (the Dual Fuel's script assumed the same)., harvested
What it goes with
By the way it mounts, and the figures each part on file states: a part whose figures say it doesn't fit is left out, and one whose fit can't be checked from what is published is marked. A check is against published figures, not a guarantee.
Picatinny rail (MIL-STD-1913)
- Uppers
- Aero Precision M4E1 Enhanced Upper Receiver Stripped, Aero Precision M4E1 Threaded upper receiver, BCM M4 Upper Receiver Assembly (w/ Laser T-Markings), Expo Arms 7075 Stripped AR-15 Upper Receiver, Geissele Automatics Super Duty Stripped Upper Receiver, Nordic Components 22RB .22 LR upper, 16", Palmetto State Armory AR-15 Stripped Upper Receiver, Panzer Arms AR57 ULT Complete AR-15 Upper Receiver - 5.7x28mm - 12", Panzer Arms AR57 Ultra Light Tactical Complete AR-15 Upper Receiver - 5.7x28mm - 16"
- Handguards
- Aero Precision AR15 10.3" R-ONE M-LOK handguard, Aero Precision AR15 12.7" R-ONE M-LOK handguard, Aero Precision AR15 15" Enhanced M-LOK Handguard, Gen 2, Aero Precision AR15 15" R-ONE M-LOK handguard, Aero Precision AR15 15" S-ONE M-LOK Handguard, Aero Precision AR15 16.6" R-ONE M-LOK handguard, Aero Precision AR15 7.3" R-ONE M-LOK handguard, Aero Precision AR15 9.3" R-ONE M-LOK handguard, BCM MCMR-10 (M-LOK® Compatible* Modular Rail), BCM MCMR-13 (M-LOK® Compatible* Modular Rail), BCM MCMR-15 (M-LOK® Compatible* Modular Rail), Expo Arms Free Float AR-15 Handguard - M-LOK - 15", Geissele Automatics 10.5" Super Modular Rail MK16 M-LOK, Geissele Automatics 13.5" Super Modular Rail MK16 M-LOK, Geissele Automatics 15" Super Modular Rail MK16 M-LOK, MAS Defense 12.62" NERO M-LOK FREE FLOAT, MAS Defense 15" NERO M-LOK FREE FLOAT, MAS Defense 9.87" NERO M-LOK FREE FLOAT, Midwest Industries AR-15/M16 Two Piece Drop-In Handguard, M-LOK® (Carbine), Midwest Industries AR-15/M16 Two Piece Drop-In Handguard, M-LOK® (Mid-Length), Midwest Industries Combat Rail One Piece Free Float Handguard, M-LOK™ (15")
- Frames
- Taurus TX22 Gen 2 frame
- Rail sections
- Magpul M-LOK® Aluminum Rail, 3 Slots, Magpul M-LOK® Aluminum Rail, 5 Slots, Magpul M-LOK® Aluminum Rail, 7 Slots, Magpul M-LOK® Aluminum Rail, 9 Slots, Magpul M-LOK® Polymer Rail, 11 Slots, Magpul M-LOK® Polymer Rail, 3 Slots, Magpul M-LOK® Polymer Rail, 5 Slots, Magpul M-LOK® Polymer Rail, 7 Slots, Magpul M-LOK® Polymer Rail, 9 Slots
M-LOK
- Uppers
- Nordic Components 22RB .22 LR upper, 16" (fit unchecked), Panzer Arms AR57 ULT Complete AR-15 Upper Receiver - 5.7x28mm - 12" (fit unchecked), Panzer Arms AR57 Ultra Light Tactical Complete AR-15 Upper Receiver - 5.7x28mm - 16" (fit unchecked)
- Handguards
- Aero Precision AR15 10.3" R-ONE M-LOK handguard (fit unchecked), Aero Precision AR15 12.7" R-ONE M-LOK handguard (fit unchecked), Aero Precision AR15 15" Enhanced M-LOK Handguard, Gen 2 (fit unchecked), Aero Precision AR15 15" R-ONE M-LOK handguard (fit unchecked), Aero Precision AR15 15" S-ONE M-LOK Handguard (fit unchecked), Aero Precision AR15 16.6" R-ONE M-LOK handguard (fit unchecked), Aero Precision AR15 7.3" R-ONE M-LOK handguard (fit unchecked), Aero Precision AR15 9.3" R-ONE M-LOK handguard (fit unchecked), BCM MCMR-10 (M-LOK® Compatible* Modular Rail) (fit unchecked), BCM MCMR-13 (M-LOK® Compatible* Modular Rail) (fit unchecked), BCM MCMR-15 (M-LOK® Compatible* Modular Rail) (fit unchecked), BCM PMCR (Polymer M-LOK® Compatible Rail)* Carbine Length-BLACK (fit unchecked), BCM PMCR (Polymer M-LOK® Compatible Rail)* Mid Length-BLACK (fit unchecked), Expo Arms Free Float AR-15 Handguard - M-LOK - 15" (fit unchecked), Geissele Automatics 10.5" Super Modular Rail MK16 M-LOK (fit unchecked), Geissele Automatics 13.5" Super Modular Rail MK16 M-LOK (fit unchecked), Geissele Automatics 15" Super Modular Rail MK16 M-LOK (fit unchecked), Magpul MOE SL® Hand Guard, Carbine-Length – AR15/M4 (fit unchecked), Magpul MOE SL® Hand Guard, Mid-Length – AR15/M4 (fit unchecked), Magpul MOE® M-LOK® Hand Guard, Carbine-Length – AR15/M4 (fit unchecked), Magpul MOE® M-LOK® Hand Guard, Mid-Length – AR15/M4 (fit unchecked), MAS Defense 12.62" NERO M-LOK FREE FLOAT (fit unchecked), MAS Defense 15" NERO M-LOK FREE FLOAT (fit unchecked), MAS Defense 9.87" NERO M-LOK FREE FLOAT (fit unchecked), Midwest Industries AR-15/M16 Two Piece Drop-In Handguard, M-LOK® (Carbine) (fit unchecked), Midwest Industries AR-15/M16 Two Piece Drop-In Handguard, M-LOK® (Mid-Length) (fit unchecked), Midwest Industries Combat Rail One Piece Free Float Handguard, M-LOK™ (15") (fit unchecked)
- Adapter plates
- Magpul M-LOK Hand Stop MOE Adapter (fit unchecked)
Prices on file
Each seller's latest reading of its own page: before tax and shipping, and not a quote. The pages are read again every night.
- Primary Arms $269.99 Black Nov 21, 2026, in stock that day
- Primary Arms $269.99 Tan Nov 21, 2026, in stock that day
- Mile High Shooting Accessories $341.00 Black Nov 21, 2026, in stock that day
- MidwayUSA $341.00 Black Nov 21, 2026, in stock that day
- MidwayUSA $341.00 Tan Nov 21, 2026, in stock that day
- Impact Guns $341.00 Black Nov 21, 2026, in stock that day
- T.REX ARMS $341.00 Black Nov 21, 2026, in stock that day
- T.REX ARMS $341.00 Tan Nov 21, 2026, in stock that day
- Sportsman's Warehouse $341.00 Black Nov 21, 2026, in stock that day