Charging handle
Radian Weapons Raptor-SD Ambidextrous Charging Handle AR15/M16
Radian's Raptor with a ported shaft: "The suppressor-optimized Raptor-SD™ features a ported shaft designed to redirect gasses down and forward, away from the shooter’s face when shooting suppressed." "Machined from 7075-T6 aluminum", "MILSPEC Type 3 Hard Coat Anodized Finish w/ Cerakote Color Options", sizes AR15/M16 and AR10/SR25 (Radian's page; this is the AR15/M16 one). "The square shaft profile fills gaps in the receiver, forcing excess gas back through the ports and away from the shooter." (T.REX ARMS). Six notches along each of the shaft's top corners, each with a hole through it into the key's channel (US 10,203,174, which Radian's patents page lists for the RAPTOR-SD; "US9995543" and "USD694354" are etched on its shaft with "FOR AR15/M16"). The black one is R0006 (Primary Arms' "SKU: R0006 MPN: R0006"; Midwest Gun Works' table). Fit, as sellers say it: "will work in the same builds that accept the original Raptor Ambidextrous Charging Handle", "*May NOT fit on some SIG ARs, specifically the 516 Model" (Wing Tactical; no SIG receiver is in the catalog, and nothing checks it).

- Weight
- 1.38 oz ± 0.005 oz Conflictpublished: Wing Tactical, Radian AR-15 Silencer-Optimized Raptor-SD Ambidextrous Charging Handle, SPECIFICATIONS (MPN: R0006 / R0065 / R0066 / R0067 / R0068 / R0255 / R0561), a seller, read Oct 19, 2026Its sources span 1.25 oz to 1.38 oz.
- Lowest price
- $129.95 at AR15Discounts, read Nov 21, 2026 (Tungsten Grey)
- Maker's number
- R0006
- Colours
- Black Anodized, Flat Dark Earth, Radian OD, Radian Grey, Tungsten Grey
- Drawn as
- modelled
- Maker's page
- radianweapons.com
In “Aero 5.56 carbine”, a build on the start page, in place of its Aero Precision AR15/M4 5.56 charging handle.
Its figures
Every figure the site draws and checks it by, with where it came from. Open one for each source's reading, and why one is used where they differ.
The shaft: its shoulder (the front face of the ledge under the T's block) to the front hook's tip5.895 in ± 0.01 in 149.7 mmConfirmedWorked out: {aero-charging-handle.length}
Worked out 5.895 in ± 0.01 in used
{aero-charging-handle.length}, harvested
US Army TDP drawing 8448518 (Handle, Charging), rev G, side view: 5.600 and .295.
The standard's, by expression: no page states a length (every length on a seller's page is a box's: 10.45, 10.95 and 11.5 in at Alexander's). "FOR AR15/M16" is etched on the shaft (Primary Arms R0006_04; Impact Guns' render from above). Primary Arms' photo from below reads it at the shaft's own scale (the plan's check).
The shaft's width0.4 in ± 0.005 in 10.2 mmConfirmedWorked out: {aero-charging-handle.shaft_width}
Worked out 0.4 in ± 0.005 in used
{aero-charging-handle.shaft_width}, harvested
US Army TDP drawing 8448518, plan view: .400 -B-.
The standard's, by expression: the channel it runs in is the standard's. It is the plan photo's scale. "The square shaft profile fills gaps in the receiver, forcing excess gas back through the ports" (T.REX ARMS): the shaft is the standard's square section, not a narrowed one.
The shaft's thickness0.298 in ± 0.0035 in 7.6 mmConfirmedWorked out: {aero-charging-handle.shaft_thickness}
Worked out 0.2985 in ± 0.0035 in used
{aero-charging-handle.shaft_thickness}, harvested
US Army TDP drawing 8448518, side view: .2985 ±.0035.
The key's channel under the shaft: its width0.312 in ± 0.005 in 7.9 mmConfirmedWorked out: {bcm-mk2-charging-handle.channel_width}
Worked out 0.312 in ± 0.005 in used
{bcm-mk2-charging-handle.channel_width}, harvested
US Army TDP drawing 8448518 (Handle, Charging), rev G, Section A-A: .312, with FULL R.
The key's channel: its depth from the shaft's underside to the top of its round roof0.25 in ± 0.005 in 6.3 mmConfirmedWorked out: {bcm-mk2-charging-handle.channel_depth}
Worked out 0.25 in ± 0.005 in used
{bcm-mk2-charging-handle.channel_depth}, harvested
US Army TDP drawing 8448518, Section A-A: .250.
The front hook: its rear face to its tip0.295 in ± 0.005 in 7.5 mmConfirmedWorked out: {bcm-mk2-charging-handle.hook_length}
Worked out 0.295 in ± 0.005 in used
{bcm-mk2-charging-handle.hook_length}, harvested
US Army TDP drawing 8448518, side view: .295.
The front hook: how far it hangs below the shaft's underside0.275 in ± 0.005 in 7 mmConfirmedWorked out: {bcm-mk2-charging-handle.hook_drop}
Worked out 0.275 in ± 0.005 in used
{bcm-mk2-charging-handle.hook_drop}, harvested
US Army TDP drawing 8448518, side view: .275 -C-.
The front hook: the round between its rear face and the shaft's underside0.187 in ± 0.005 in 4.7 mmConfirmedWorked out: {bcm-mk2-charging-handle.hook_fillet_r}
Worked out 0.187 in ± 0.005 in used
{bcm-mk2-charging-handle.hook_fillet_r}, harvested
US Army TDP drawing 8448518, side view: .187 R.
Across the two guide lugs near the shaft's front end0.488 in ± 0.005 in 12.4 mmConfirmedWorked out: {bcm-mk2-charging-handle.guide_lug_width}
Worked out 0.488 in ± 0.005 in used
{bcm-mk2-charging-handle.guide_lug_width}, harvested
US Army TDP drawing 8448518, end view: .488.
The guide lugs' height, from the shaft's underside up0.119 in ± 0.002 in 3 mmConfirmedWorked out: {bcm-mk2-charging-handle.guide_lug_height}
Worked out 0.119 in ± 0.002 in used
{bcm-mk2-charging-handle.guide_lug_height}, harvested
US Army TDP drawing 8448518, end view: .119 ±.002.
The right-hand latch's reach: its tip off the shaft's right side face, across1.163 in ± 0.02 in 29.5 mmProvisionalPhoto: Primary Arms R0006_01: the black R0006 from below, on white, 2200 x 1467
Photo 1.163 in ± 0.02 in used
Primary Arms R0006_01: the black R0006 from below, on white, 2200 x 1467, harvested
Scale: the shaft's width column by column (shaft_width). Read by the traced plan's furthest point to the handle's right, 1.363 off the shaft's centre line, less half the shaft's width
No page states one. Primary Arms classes the SD's latches as "Large Latch" and Wing Tactical says "Extended latch for positive engagement".
The left-hand latch's reach: its tip off the shaft's left side face, across1.035 in ± 0.02 in 26.3 mmProvisionalPhoto: Primary Arms R0006_01: the black R0006 from below, on white, 2200 x 1467
Photo 1.035 in ± 0.02 in used
Primary Arms R0006_01: the black R0006 from below, on white, 2200 x 1467, harvested
Scale: the shaft's width column by column (shaft_width). Read by the traced plan's furthest point to the handle's left, 1.235 off the shaft's centre line, less half the shaft's width
The T, side to side: across the two latches' tips2.599 in ± 0.038 in 66 mmProvisionalPhoto: Primary Arms: the black R0006 from below, on white, 2200 x 1467 (R0006_01)
Photo 2.599 in ± 0.038 in used
Primary Arms: the black R0006 from below, on white, 2200 x 1467 (R0006_01), harvested
Scale: scale from radian-raptor-sd-charging-handle.shaft_width = 0.4 in, the tube's own width column by column: 110.8 px over columns 560–900, 110.8 px over columns 950–1230, 111.1 px over columns 1960–2030; a line through them (rms 0.20 px) changes +0.7% from column 560 to 2030, so the photo is yawed and one scale would not do. Heights by each column's width; lengths by (u − 1100)/width, the lens's axis taken to meet the image at column 1100; 277.3 px/in there. The axis is the tube's centre line (tilt -0.06°, rms 0.16 px). Read by height of the traced outline (tools/trace.py); across the two latches' tips (their lower faces' edges)
The T, front to back: its rear face behind the shoulder1.083 in ± 0.02 in 27.5 mmProvisionalPhoto: Primary Arms: the black R0006 from below, on white, 2200 x 1467 (R0006_01)
Photo 1.083 in ± 0.02 in used
Primary Arms: the black R0006 from below, on white, 2200 x 1467 (R0006_01), harvested
Scale: scale from radian-raptor-sd-charging-handle.shaft_width = 0.4 in, the tube's own width column by column: 110.8 px over columns 560–900, 110.8 px over columns 950–1230, 111.1 px over columns 1960–2030; a line through them (rms 0.20 px) changes +0.7% from column 560 to 2030, so the photo is yawed and one scale would not do. Heights by each column's width; lengths by (u − 1100)/width, the lens's axis taken to meet the image at column 1100; 277.3 px/in there. The axis is the tube's centre line (tilt -0.06°, rms 0.16 px). Read by −x_min of the traced outline (tools/trace.py); the T's rear face behind the shoulder
The T's height: its top (the latches' upper faces and the plate between them, level in the side view) above the shaft's underside0.403 in ± 0.012 in 10.2 mmProvisionalPhoto: Impact Guns radian-r0006-2: the maker's render of the black R0006 from its right side, 1500 x 163
Photo 0.403 in ± 0.012 in used
Impact Guns radian-r0006-2: the maker's render of the black R0006 from its right side, 1500 x 163, harvested
Scale: the shaft's own thickness across the plain stretch of the shaft (columns 300 to 880): its top edge at row 33.17 and its underside at 94.68 (where each column crosses 128 of 255), 61.5 px for shaft_thickness .2985, with the hook's drop: rows 94.68 to 153.27, 58.6 px for hook_drop .275; the two together, 120.1 px for .5735: 209.4 px/in up and down (the thickness alone reads 206.1, the drop alone 213.1: ± 2%). Read by the T's top edge over columns 20 to 190 (the latch's tip to its root) at row 10.30 (7.7 to 13.8: its upper edge is broken), the shaft's underside at 94.68: 84.4 px
A latch's lower face above the shaft's underside0 in ± 0.01 in 0 mmProvisionalPhoto: Impact Guns radian-r0006-2: the maker's render of the black R0006 from its right side, 1500 x 163
Photo 0 in ± 0.01 in used
Impact Guns radian-r0006-2: the maker's render of the black R0006 from its right side, 1500 x 163, harvested
Scale: the shaft's own thickness across the plain stretch of the shaft (columns 300 to 880): its top edge at row 33.17 and its underside at 94.68 (where each column crosses 128 of 255), 61.5 px for shaft_thickness .2985, with the hook's drop: rows 94.68 to 153.27, 58.6 px for hook_drop .275; the two together, 120.1 px for .5735: 209.4 px/in up and down (the thickness alone reads 206.1, the drop alone 213.1: ± 2%). Read by the T's lowest dark row (96 over columns 10 to 200) against the shaft's underside (94.68 by the 128 crossing, its lowest dark row 95 to 96): within a pixel
In the side view the T's lower edge runs on level with the shaft's underside (row 96 at the T, 94.7 to 95.5 along the shaft): the latches' lower faces are drawn flush with it.
The T's tall part's front end (the latch's root beside the block), behind the shoulder0.107 in ± 0.02 in 2.7 mmProvisionalPhoto: Impact Guns radian-r0006-2: the maker's render of the black R0006 from its right side, 1500 x 163
Photo 0.107 in ± 0.02 in used
Impact Guns radian-r0006-2: the maker's render of the black R0006 from its right side, 1500 x 163, harvested
Scale: the hook's tip (column 1489) at length ahead of the shoulder at 213 px/in along (the pitch's scale, 96.0 px for port_pitch): the shoulder at column 228. Read by the T's top drops from the latch's height to the shaft's at column 205 (± 3)
The latch's hook arm (what catches the receiver, on the left): its underside above the shaft's underside0.086 in ± 0.01 in 2.2 mmProvisionalPhoto: US D694,354 S, 'Firearm charging handle', sheet 4 of 5: FIG. 5 and FIG. 6, the two side views; the patent office's PDF, 2560 x 3300
Photo 0.086 in ± 0.01 in used
US D694,354 S, 'Firearm charging handle', sheet 4 of 5: FIG. 5 and FIG. 6, the two side views; the patent office's PDF, 2560 x 3300, harvested
Scale: the shaft's own thickness in the same figure (shaft_thickness): its broken lines 134.5 px apart in FIG. 5 (450.6 px/in) and 128 px in FIG. 6 (428.8 px/in). Read by the hook's broken box ahead of the latch: its nearer line 39 px from the shaft's underside line in FIG. 5 (0.087), 36 px in FIG. 6 (0.084): the pixel counts the Raptor's ledger took off the same sheet, read again here as this handle's own patent
Broken lines: the patent's environment, not its claim.
From the design patent's broken lines alone: no view of the SD shows its left side square on. US D694,354 is on Radian's patents page for the RAPTOR-SD and etched on the SD's shaft (Impact Guns' render from above, Primary Arms R0066_00).
The latch's hook arm: its top above the shaft's underside0.217 in ± 0.01 in 5.5 mmProvisionalPhoto: US D694,354 S, 'Firearm charging handle', sheet 4 of 5: FIG. 5 and FIG. 6
Photo 0.217 in ± 0.01 in used
US D694,354 S, 'Firearm charging handle', sheet 4 of 5: FIG. 5 and FIG. 6, harvested
Scale: the shaft's own thickness in the same figure (shaft_thickness): 450.6 px/in in FIG. 5, 428.8 in FIG. 6. Read by the hook's broken box ahead of the latch: its further line 97 px from the shaft's underside line in FIG. 5 (0.215), 94 px in FIG. 6 (0.219)
Broken lines: the patent's environment, not its claim.
The ledge under the T's block (the lower plate run on to the shoulder): its top above the shaft's underside0.086 in ± 0.01 in 2.2 mmProvisionalPhoto: US D694,354 S, 'Firearm charging handle', sheet 4 of 5: FIG. 5 and FIG. 6
Photo 0.086 in ± 0.01 in used
US D694,354 S, 'Firearm charging handle', sheet 4 of 5: FIG. 5 and FIG. 6, harvested
Scale: the shaft's own thickness in the same figure (shaft_thickness): 450.6 px/in in FIG. 5, 428.8 in FIG. 6. Read by the lower of the two broken lines along the T's body between the latch and the shoulder, on both sides: 39 px above the shaft's underside line in FIG. 5 (0.087), 36 px in FIG. 6 (0.084)
Broken lines: the patent's environment, not its claim.
The key's channel: how far behind the shoulder its round rear end reaches, under the T's block0.106 in ± 0.02 in 2.7 mmProvisionalPhoto: Primary Arms R0006_01: the black R0006 from below, on white, 2200 x 1467
Photo 0.106 in ± 0.02 in used
Primary Arms R0006_01: the black R0006 from below, on white, 2200 x 1467, harvested
Scale: the shaft's width column by column (shaft_width): 277.3 px/in there. Read by the channel's round end at column 392 (± 5) on the shaft's centre line, the shoulder being at column 421.5
The latches' pivot pins: their ends' diameter0.065 in ± 0.012 in 1.7 mmProvisionalPhoto: Primary Arms R0006_01: the black R0006 from below, on white, 2200 x 1467
Photo 0.065 in ± 0.012 in used
Primary Arms R0006_01: the black R0006 from below, on white, 2200 x 1467, harvested
Scale: the shaft's width column by column (shaft_width): 277.3 px/in. Read by each pin's bright end (over 150 of 255): 16 to 22 px across (columns 244 to 266 and 249 to 264)
The ports along each top corner of the shaft: how many6ProvisionalPhoto: Primary Arms R0006_01: the black R0006 from below, on white, 2200 x 1467
Photo 6 count used
Primary Arms R0006_01: the black R0006 from below, on white, 2200 x 1467, harvested
Scale: none: a count. Read by the white holes seen through the channel: six on each side of its centre line, in pairs at one place along the shaft (the trace's `ports` feature: twelve)
Counted on three views that show the whole run: six holes on each side seen through the channel from below (Primary Arms R0006_01: twelve), six notch-and-hole pairs along both edges from above (Impact Guns' render), six notches along the near corner from the side (Impact Guns' render).
The ports' pitch along the shaft0.443 in ± 0.004 in 11.2 mmProvisionalPhoto: Primary Arms R0006_01: the black R0006 from below, on white, 2200 x 1467
Photo 0.4425 in ± 0.004 in used
Primary Arms R0006_01: the black R0006 from below, on white, 2200 x 1467, harvested
Scale: the shaft's width column by column (shaft_width), and put to the drawing's length as the plan is (the hook's tip reads 5.968 for 5.895: lengths by 0.98777). Read by the twelve holes' centres in the plan (the trace's `ports` feature), pair by pair 3.093, 3.542, 3.991, 4.440, 4.887, 5.333 ahead of the shoulder: 0.448 a pitch (0.447 to 0.449), by 0.98777
A port's notch: how far it is cut down the shaft's side face from the top (and, its face being on the corner's diagonal, as far in across the top)0.116 in ± 0.008 in 2.9 mmCorroboratedPhoto: Impact Guns radian-r0006-2: the maker's render of the black R0006 from its right side, 1500 x 163
Photo 0.116 in ± 0.008 in used
Impact Guns radian-r0006-2: the maker's render of the black R0006 from its right side, 1500 x 163, harvested
Scale: the shaft's own thickness across the plain stretch of the shaft (columns 300 to 880): its top edge at row 33.17 and its underside at 94.68 (where each column crosses 128 of 255), 61.5 px for shaft_thickness .2985, with the hook's drop: rows 94.68 to 153.27, 58.6 px for hook_drop .275; the two together, 120.1 px for .5735: 209.4 px/in up and down (the thickness alone reads 206.1, the drop alone 213.1: ± 2%). Read by the notch's sloped face, lit, from the shaft's top edge (row 33.2) to its lower edge on the side face (row 57.5, where the five faces' lit band ends): 24.3 px
Photo 0.116 in ± 0.008 in
Impact Guns radian-r0006: the maker's render of the black R0006 from above, 2500 x 930, harvested
Scale: the shaft's own width there, 142.5 px for shaft_width .400: 356 px/in. Read by the notch (its dark sloped face) from the shaft's edge in to its inner edge on the top: 41 px, on the fourth pair (columns 1600 to 1900)
The two views agree; the side view's edge is the sharper.
A port's hole: its diameter (square to the notch's face)0.115 in ± 0.008 in 2.9 mmCorroboratedPhoto: Impact Guns radian-r0006: the maker's render of the black R0006 from above, 2500 x 930
Photo 0.115 in ± 0.008 in used
Impact Guns radian-r0006: the maker's render of the black R0006 from above, 2500 x 930, harvested
Scale: the shaft's own width there, 142.5 px for shaft_width .400: 356 px/in. Read by the hole's rim along the shaft (across it the 45-degree face foreshortens it): 41 px
Photo 0.115 in ± 0.008 in
Impact Guns radian-r0006-2: the maker's render of the black R0006 from its right side, 1500 x 163, harvested
Scale: the ports' own pitch along the shaft (port_pitch, read on the plan): 96.0 px between each two holes' centres in this render (991, 1086, 1183, 1279, 1375): 0.00461 in a pixel along; the render's along and across scales differ by about 3% (its aspect isn't square), so lengths along are taken at the pitch's scale, not the thickness's. Read by the hole's rim along the shaft (its dark crescent and the white seen through it): 25 px
The two views agree.
A port's notch at its lower edge (on the side face): its rear wall, behind the hole's centre0.138 in ± 0.012 in 3.5 mmProvisionalPhoto: Impact Guns radian-r0006-2: the maker's render of the black R0006 from its right side, 1500 x 163
Photo 0.138 in ± 0.012 in used
Impact Guns radian-r0006-2: the maker's render of the black R0006 from its right side, 1500 x 163, harvested
Scale: the ports' own pitch along the shaft (port_pitch, read on the plan): 96.0 px between each two holes' centres in this render (991, 1086, 1183, 1279, 1375): 0.00461 in a pixel along; the render's along and across scales differ by about 3% (its aspect isn't square), so lengths along are taken at the pitch's scale, not the thickness's. Read by the lit face's lower edge (row 56) begins 32, 31, 32, 28 and 27 px behind the five whole ports' hole centres: mean 30.0 px
The notch's two end walls lean forward going up (US 10,203,174 FIG. 9B; the side render): its outline on the side face is a parallelogram, these four figures its corners.
A port's notch at its lower edge: its front wall, ahead of the hole's centre0.092 in ± 0.012 in 2.3 mmProvisionalPhoto: Impact Guns radian-r0006-2: the maker's render of the black R0006 from its right side, 1500 x 163
Photo 0.092 in ± 0.012 in used
Impact Guns radian-r0006-2: the maker's render of the black R0006 from its right side, 1500 x 163, harvested
Scale: the ports' own pitch along the shaft (port_pitch, read on the plan): 96.0 px between each two holes' centres in this render (991, 1086, 1183, 1279, 1375): 0.00461 in a pixel along; the render's along and across scales differ by about 3% (its aspect isn't square), so lengths along are taken at the pitch's scale, not the thickness's. Read by the lit face's lower edge (row 56) ends 18, 19, 18, 22 and 22 px ahead of the hole centres: mean 19.8 px
A port's notch at the shaft's top: its rear wall, behind the hole's centre0.059 in ± 0.012 in 1.5 mmProvisionalPhoto: Impact Guns radian-r0006-2: the maker's render of the black R0006 from its right side, 1500 x 163
Photo 0.059 in ± 0.012 in used
Impact Guns radian-r0006-2: the maker's render of the black R0006 from its right side, 1500 x 163, harvested
Scale: the ports' own pitch along the shaft (port_pitch, read on the plan): 96.0 px between each two holes' centres in this render (991, 1086, 1183, 1279, 1375): 0.00461 in a pixel along; the render's along and across scales differ by about 3% (its aspect isn't square), so lengths along are taken at the pitch's scale, not the thickness's. Read by the lit face at row 34 (a pixel under the top edge) begins 13, 12, 13, 13 px behind the hole centres: mean 12.8 px
A port's notch at the shaft's top: its front wall, ahead of the hole's centre0.19 in ± 0.012 in 4.8 mmProvisionalPhoto: Impact Guns radian-r0006-2: the maker's render of the black R0006 from its right side, 1500 x 163
Photo 0.19 in ± 0.012 in used
Impact Guns radian-r0006-2: the maker's render of the black R0006 from its right side, 1500 x 163, harvested
Scale: the ports' own pitch along the shaft (port_pitch, read on the plan): 96.0 px between each two holes' centres in this render (991, 1086, 1183, 1279, 1375): 0.00461 in a pixel along; the render's along and across scales differ by about 3% (its aspect isn't square), so lengths along are taken at the pitch's scale, not the thickness's. Read by the lit face at row 34 ends 41, 42, 41, 41 px ahead of the hole centres: mean 41.3 px
The upper plate's arc (concave toward the muzzle, round the logo): its middle, behind the line through the two pins0.099 in ± 0.012 in 2.5 mmCorroboratedPhoto: Primary Arms R0066_01: the FDE one's T from above, the muzzle down, 2200 x 1467
Photo 0.12 in ± 0.02 in
Impact Guns radian-r0006: the maker's render of the black R0006 from above, 2500 x 930, harvested
Scale: the shaft's own width there, 142.5 px for shaft_width .400: 356 px/in. Read by the arc's rearmost point on the centre line at column 141 (± 4), the two pins' centres at column 185: 44 px
Photo 0.099 in ± 0.012 in used
Primary Arms R0066_01: the FDE one's T from above, the muzzle down, 2200 x 1467, harvested
Scale: the two pins' centres (830, 445 and 1457, 445, ± 3 px) 627 px apart for the 0.869 the plan has between them (the trace's `pins`): 721.5 px/in, on the plate's own top. Read by the arc's rearmost point on the centre line at row 374 (± 5), the pins' centres at row 445.5: 71.5 px
The larger picture of the two, on the plate's own top; the render from above reads 0.12, within the two readings' ±.
The upper plate's ears round the two pins: their outer radius0.105 in ± 0.02 in 2.7 mmProvisionalPhoto: Impact Guns radian-r0006: the maker's render of the black R0006 from above, 2500 x 930
Photo 0.105 in ± 0.02 in used
Impact Guns radian-r0006: the maker's render of the black R0006 from above, 2500 x 930, harvested
Scale: the shaft's own width there, 142.5 px for shaft_width .400: 356 px/in. Read by each ear's rounded edge about its pin, ahead of and beside it: 37 px (± 5) from the pin's centre
The upper plate's arc round the logo: its radius (a circle centred ahead of it on the centre line)0.346 in ± 0.03 in 8.8 mmProvisionalPhoto: Primary Arms R0066_01: the FDE one's T from above, the muzzle down, 2200 x 1467
Photo 0.346 in ± 0.03 in used
Primary Arms R0066_01: the FDE one's T from above, the muzzle down, 2200 x 1467, harvested
Scale: the two pins' centres (830, 445 and 1457, 445, ± 3 px) 627 px apart for the 0.869 the plan has between them (the trace's `pins`): 721.5 px/in, on the plate's own top. Read by the arc's ends, where it meets the ears (918, 517 and 1370, 517, ± 10 px): a chord of 452 px (0.627) with a sagitta of 143 px (0.198) to its rearmost point: a circle of 0.346
What it goes with
By the way it mounts, and the figures each part on file states: a part whose figures say it doesn't fit is left out, and one whose fit can't be checked from what is published is marked. A check is against published figures, not a guarantee.
Charging handle channel
- Uppers
- Aero Precision M4E1 Enhanced Upper Receiver Stripped, Aero Precision M4E1 Threaded upper receiver, BCM M4 Upper Receiver Assembly (w/ Laser T-Markings), Expo Arms 7075 Stripped AR-15 Upper Receiver, Geissele Automatics Super Duty Stripped Upper Receiver, Palmetto State Armory AR-15 Stripped Upper Receiver
Prices on file
Each seller's latest reading of its own page: before tax and shipping, and not a quote. The pages are read again every night.
- AR15Discounts $129.95 Tungsten Grey Nov 21, 2026, stock not said
- Primary Arms $134.95 Black Anodized Nov 21, 2026, in stock that day
- Midwest Gun Works $134.95 Black Anodized Nov 21, 2026, in stock that day
- T.REX ARMS $134.95 Black Anodized Nov 21, 2026, in stock that day
- KYGUNCO $134.95 Black Anodized Nov 21, 2026, in stock that day
- Impact Guns $134.95 Black Anodized Nov 21, 2026, in stock that day
- AR15Discounts $134.95 Black Anodized Nov 21, 2026, stock not said
- Alexander's Store $134.95 Black Anodized Nov 18, 2026, in stock that day
- Sportsman's Warehouse $134.99 Black Anodized Nov 21, 2026, in stock that day
- Primary Arms $139.95 Flat Dark Earth Nov 21, 2026, in stock that day
- Primary Arms $139.95 Radian OD Nov 21, 2026, in stock that day
- Midwest Gun Works $139.95 Flat Dark Earth Nov 21, 2026, in stock that day
- Midwest Gun Works $139.95 Radian OD Nov 21, 2026, in stock that day
- Midwest Gun Works $139.95 Radian Grey Nov 21, 2026, in stock that day
- T.REX ARMS $139.95 Flat Dark Earth Nov 21, 2026, in stock that day
- AR15Discounts $139.95 Flat Dark Earth Nov 21, 2026, stock not said
- Alexander's Store $139.95 Radian OD Nov 18, 2026, in stock that day
- Rifle Supply $134.99 Black Anodized Nov 21, 2026, out of stock that day
- Alexander's Store $139.95 Radian Grey Nov 18, 2026, out of stock that day
- KYGUNCO $155.72 Tungsten Grey Nov 21, 2026, out of stock that day