Barrel nut
Spike's Tactical Delta Ring Assembly w/Mil-Spec Barrel Nut
The standard barrel nut with its delta ring, weld spring and snap ring already on it: the nut threads onto the upper receiver's nose and clamps the barrel extension, and the spring-loaded ring on it holds the rear of a drop-in handguard. Spike's: "The Spike's Tactical Delta Ring assembly is fully Mil-Spec and comes ready for you to finish your new upper." "Inside the package you'll find everything already installed so you can quickly mount your barrel".

- Weight
- 2.5 oz ± 0.05 oz Confirmedpublished: Spike's Tactical, Delta Ring Assembly w/Mil-Spec Barrel Nut (SDR100A): Specs, the maker, read Oct 28, 2026
- Lowest price
- $18.95 at Spike's Tactical, read Nov 21, 2026
- Maker's number
- SDR100A
- Colour
- Phosphate, black
- Drawn as
- modelled
- Maker's page
- spikestactical.com
In “Drop-in 16 in, Stealth Gray on BCM's MK2 lower”, a build on the start page, in place of its BCM G.I. Barrel Nut - AR15.
Its figures
Every figure the site draws and checks it by, with where it came from. Open one for each source's reading, and why one is used where they differ.
Length along the bore0.85 in ± 0.005 in 21.6 mmProvisionalWorked out: {std.ar15.barrel_nut_length}
Worked out 0.85 in ± 0.005 in used
{std.ar15.barrel_nut_length}, harvested
The nut's. Spike's states none: "fully Mil-Spec", the mil-spec nut's. Its front photo has the ring's front flush with the nut's flange, as the Army's assembly (8448711) has them with the ring forward on its spring.
Its toothed flange's outside diameter1.56 in ± 0.003 in 39.6 mmProvisionalWorked out: {std.ar15.barrel_nut_flange_od}
Worked out 1.56 in ± 0.003 in used
{std.ar15.barrel_nut_flange_od}, harvested
The mil-spec nut's; Spike's states none.
The delta ring's largest outside diameter (its rear land)2.1 in ± 0.005 in 53.3 mmConfirmedWorked out: {std.ar15.slip_ring_od}
Worked out 2.1 in ± 0.005 in used
{std.ar15.slip_ring_od}, harvested
The Army's drawing's (8448712); Spike's: "The delta ring itself is made of Mil-Spec aluminum".
The notches round the nut's flange20ProvisionalWorked out: {std.ar15.barrel_nut_notches}
Worked out 20 count ± 0 count used
{std.ar15.barrel_nut_notches}, harvested
Spike's front photo (b8505e770f0f) shows the whole flange inside the ring's skirt, an oblique from in front and above: along its lower arc, where the round is seen least foreshortened, the notches come every 85 px on a flange 585 px across, a twentieth of its round (1838 px). Not counted one by one round the far side, where the teeth crowd.
The lands round the delta ring's outside7ConfirmedWorked out: {std.ar15.slip_ring_steps} + 1
Photo 7 count ± 0 count
Spike's front photo, 2000 px, harvested
Scale: none (a count). Read by counted down the ring's near side, below the skirt's front face: six dark step lines, seven lit lands
Worked out 7 count ± 0 count used
{std.ar15.slip_ring_steps} + 1, harvested
The drawing's six steps; Spike's photo has the same count.
What it goes with
By the way it mounts, and the figures each part on file states: a part whose figures say it doesn't fit is left out, and one whose fit can't be checked from what is published is marked. A check is against published figures, not a guarantee.
Handguard mount
Delta ring on the barrel nut
- Delta rings
- BCM Delta Ring Assembly - AR15
Drop-in handguard's hold
- Handguards
- BCM PMCR (Polymer M-LOK® Compatible Rail)* Carbine Length-BLACK, BCM PMCR (Polymer M-LOK® Compatible Rail)* Mid Length-BLACK, Magpul MOE SL® Hand Guard, Carbine-Length – AR15/M4, Magpul MOE SL® Hand Guard, Mid-Length – AR15/M4, Magpul MOE® M-LOK® Hand Guard, Carbine-Length – AR15/M4, Magpul MOE® M-LOK® Hand Guard, Mid-Length – AR15/M4, Midwest Industries AR-15/M16 Two Piece Drop-In Handguard, M-LOK® (Carbine), Midwest Industries AR-15/M16 Two Piece Drop-In Handguard, M-LOK® (Mid-Length)
Prices on file
Each seller's latest reading of its own page: before tax and shipping, and not a quote. The pages are read again every night.
- Spike's Tactical $18.95 Nov 21, 2026, stock not said