Barrel nut
BCM G.I. Barrel Nut - AR15
The standard barrel nut: it threads onto the upper receiver's nose and clamps the barrel extension's flange against the receiver's front face, and its toothed flange takes the wrench, the gas tube passing through one of its notches. A delta ring assembly goes on it for a drop-in handguard. BCM: "Barrel nut for your AR15, M16, M4."

- Weight
- 1.37 oz ± 0.1 oz Provisionalworked out: (0.785398163 * ({std.ar15.barrel_nut_body_od} * {std.ar15.barrel_nut_body_od} * {std.ar15.barrel_nut_flange_rear} + {std.ar15.barrel_nut_flange_od} * {std.ar15.barrel_nut_flange_od} * ({std.ar15.barrel_nut_length} - {std.ar15.barrel_nut_flange_rear}) - ({std.ar15.barrel_nut_thread_major_d} + {std.ar15.barrel_nut_thread_minor_d}) * ({std.ar15.barrel_nut_thread_major_d} + {std.ar15.barrel_nut_thread_minor_d}) / 4 * {std.ar15.barrel_nut_thread_length} - {std.ar15.barrel_nut_counterbore_d} * {std.ar15.barrel_nut_counterbore_d} * ({std.ar15.barrel_nut_shoulder} - {std.ar15.barrel_nut_thread_length}) - {std.ar15.barrel_nut_bore_d} * {std.ar15.barrel_nut_bore_d} * ({std.ar15.barrel_nut_length} - {std.ar15.barrel_nut_shoulder} - {std.ar15.barrel_nut_front_recess}) - {std.ar15.barrel_nut_counterbore_d} * {std.ar15.barrel_nut_counterbore_d} * {std.ar15.barrel_nut_front_recess} - ({std.ar15.barrel_nut_body_od} * {std.ar15.barrel_nut_body_od} - {std.ar15.barrel_nut_groove_d} * {std.ar15.barrel_nut_groove_d}) * {std.ar15.barrel_nut_groove_width}) - {std.ar15.barrel_nut_notches} * 0.392699082 * {std.ar15.barrel_nut_notch_d} * {std.ar15.barrel_nut_notch_d} * ({std.ar15.barrel_nut_length} - {std.ar15.barrel_nut_flange_rear})) * {std.density.steel}
- Lowest price
- $8.95 at BCM, read Nov 21, 2026
- Maker's number
- Barrel-Nut-G.I.
- Colour
- BCM G.I. barrel nut, phosphate
- Drawn as
- modelled
- Maker's page
- bravocompanyusa.com
In “Drop-in 16 in, Stealth Gray on BCM's MK2 lower”, a build on the start page, as it is.
Its figures
Every figure the site draws and checks it by, with where it came from. Open one for each source's reading, and why one is used where they differ.
Length along the bore0.85 in ± 0.005 in 21.6 mmProvisionalWorked out: {std.ar15.barrel_nut_length}
Worked out 0.85 in ± 0.005 in used
{std.ar15.barrel_nut_length}, harvested
BCM states none. The mil-spec nut's: BCM calls this one the G.I. nut, and its photo has the mil-spec nut's proportions (its flange's teeth a seventh of its length, the groove near its rear end; not measured: the photo is an oblique from above, 830 px).
Its toothed flange's outside diameter1.56 in ± 0.003 in 39.6 mmProvisionalWorked out: {std.ar15.barrel_nut_flange_od}
Worked out 1.56 in ± 0.003 in used
{std.ar15.barrel_nut_flange_od}, harvested
The mil-spec nut's; BCM states none.
The notches round its flange20ProvisionalWorked out: {std.ar15.barrel_nut_notches}
Worked out 20 count ± 0 count used
{std.ar15.barrel_nut_notches}, harvested
Not counted on BCM's photo: it is an oblique from above (830 px) with notches all round the flange's rim, but the teeth at the back are foreshortened into each other. The mil-spec nut's twenty, the gas tube in the one at the top.
What it goes with
By the way it mounts, and the figures each part on file states: a part whose figures say it doesn't fit is left out, and one whose fit can't be checked from what is published is marked. A check is against published figures, not a guarantee.
Handguard mount
Delta ring on the barrel nut
- Delta rings
- BCM Delta Ring Assembly - AR15
Drop-in handguard's hold
- Handguards
- BCM PMCR (Polymer M-LOK® Compatible Rail)* Carbine Length-BLACK, BCM PMCR (Polymer M-LOK® Compatible Rail)* Mid Length-BLACK, Magpul MOE SL® Hand Guard, Carbine-Length – AR15/M4, Magpul MOE SL® Hand Guard, Mid-Length – AR15/M4, Magpul MOE® M-LOK® Hand Guard, Carbine-Length – AR15/M4, Magpul MOE® M-LOK® Hand Guard, Mid-Length – AR15/M4, Midwest Industries AR-15/M16 Two Piece Drop-In Handguard, M-LOK® (Carbine), Midwest Industries AR-15/M16 Two Piece Drop-In Handguard, M-LOK® (Mid-Length)
Prices on file
Each seller's latest reading of its own page: before tax and shipping, and not a quote. The pages are read again every night.
- BCM $8.95 Nov 21, 2026, in stock that day