Bolt carrier group
Daniel Defense Complete Bolt Carrier Group
Daniel Defense's complete M16-profile bolt carrier group, as its sellers list it: an 8620 carrier and a Carpenter 158 bolt, heavy (manganese) phosphate outside, the carrier's bore and gas key chrome lined, the key staked, the bolt shot peened with an extractor booster; "the exact same BCG that goes into almost every Daniel Defense rifle and complete upper" (Primary Arms).

- Weight
- 11.5 oz ± 0.05 oz Corroboratedpublished: Wing Tactical, Daniel Defense 5.56 Bolt Carrier Group (MPN 04-013-19032), Specifications, a seller, read Oct 19, 2026
- Lowest price
- $228.00 at Scheels, read Oct 20, 2026
- Made for
- Daniel Defense 5.56 NATO (5.56x45mm & .223 Remington) / 300 Blackout (7.6x35mm) full-auto compatible, M16 Profile, complete bolt carrier group assembly.
- Maker's number
- 04-013-19032
- Colour
- Manganese phosphate, charcoal
- Drawn as
- modelled
In “Aero 5.56 carbine”, a build on the start page, in place of its Aero Precision 5.56 bolt carrier group, complete, black nitride.
Its figures
Every figure the site draws and checks it by, with where it came from. Open one for each source's reading, and why one is used where they differ.
The carrier's length6.672 in ± 0.005 in 169.5 mmConfirmedWorked out: {std.ar15.carrier_length}
Worked out 6.672 in ± 0.005 in used
{std.ar15.carrier_length}, harvested
US Army TDP drawing 8448507 (Carrier, Bolt): the tail's rear face to the front (bolt) face.
The carrier is the standard's: Wing lists "Mil-Spec dimensions" and "Profile: Full-Auto (M16)", Primary Arms "a mil-spec, full-auto compatible, M16 profile bolt carrier group assembly"; no page states its size.
The carrier's diameter0.994 in ± 0.0005 in 25.2 mmConfirmedWorked out: {std.ar15.carrier_rail_od}
Worked out 0.994 in ± 0.0005 in used
{std.ar15.carrier_rail_od}, harvested
The diameter its rails are ground to (8448507); the body and the tail are .930 (std.ar15.carrier_body_od).
The carrier is the standard's (as its length): no page states it.
The forward assist's serrations on the right side28ConfirmedWorked out: {std.ar15.carrier_serration_count}
Worked out 28 count ± 0 count used
{std.ar15.carrier_serration_count}, harvested
US Army TDP drawing 8448507: "(28) SERRATIONS".
Photo 28 count ± 0 count
MidwayUSA's 305968.jpg: the group straight from the right, bolt to the right, 2200 x 1650, harvested
Scale: none needed: a count. Read by a luminance profile along rows 870 to 900 from x 400 to 1520, dips below the 31-pixel running mean by more than 6 levels: 28 steep faces from x 469 to 1464, 36.85 px apart (36 to 38 each), the run's pointed rear tip at 427 and the leaning flat's edge after the last
Photo 28 count ± 0 count
Primary Arms' 04-013-19032_01: the group straight from the right, bolt to the right, 2200 x 1467, harvested
Scale: none needed: a count. Read by the same profile along rows 725 to 740 from x 540 to 1440: 28 steep faces from x 594 to 1406, 30.07 px apart (25 to 38 each: a noisier photo, the two vents' holes beside the last two); rows 735 to 760 find the run's rear tip at 559 to 565 as a 29th dip
The drawing's count, which the part's two photos agree with face for face.
Counted on the part's own photos, as the check that it is the drawing's carrier: the steep face of each is a narrow dark line across the side, and a profile along the row finds every one. Both photos show the bolt to the right: the right side.
The tail's diameter0.93 in ± 0.0005 in 23.6 mmConfirmedWorked out: {std.ar15.carrier_body_od}
Worked out 0.93 in ± 0.0005 in used
{std.ar15.carrier_body_od}, harvested
8448507: the body and the tail.
Photo 0.916 in ± 0.03 in
MidwayUSA's 305968.jpg, 2200 x 1650, harvested
Scale: the serrations' pitch, .125 (std.ar15.carrier_serration_pitch): 27 pitches over 995 px = 294.8 px/in, along the same side. Read by the tail's silhouette top to bottom in columns 200 to 400 at the 235 level of 255: 269.6 to 271.1 px (268 at the 128 level). The ± is the thin reading of a dark tube's edges on white and the tail standing nearer the lens than the serrations' row by a third of an inch
Photo 0.906 in ± 0.03 in
Primary Arms' 04-013-19032_01, 2200 x 1467, harvested
Scale: the serrations' pitch, .125: 27 pitches over 812 px = 240.6 px/in. Read by columns 300 to 450 at the 235 level: 217.7 to 218.3 px (205 to 212 at the 128 level: this photo's edges are lit, as a maker's render's are)
The drawing's figure. The two photos, scaled by the serrations' own pitch, read the tail 1.5% and 2.6% under it, as a dark tube on white reads: the photos' carrier is the drawing's size.
The drawing's .930, and the part's two side photos read through the serrations' pitch (.125, std.ar15.carrier_serration_pitch) as their scale: the check that the photos' carrier is the drawing's size, not a figure drawn from them. A dark tube on white reads thin at its edges (CLAUDE.md: about 3%), and both read under it by that much.
The key's staking: each notch's width along the carrier, at the key's side0.076 in ± 0.012 in 1.9 mmCorroboratedPhoto: Primary Arms' 04-013-19032_01: the group from the right, 2200 x 1467; a crop of x 1170 to 1420, y 555 to 640 at six times
Photo 0.076 in ± 0.012 in used
Primary Arms' 04-013-19032_01: the group from the right, 2200 x 1467; a crop of x 1170 to 1420, y 555 to 640 at six times, harvested
Scale: the serrations' pitch, .125 (std.ar15.carrier_serration_pitch): 240.6 px/in along the same side (daniel-defense-bcg.serration_count). Read by each notch's two sides where they meet the key's top edge, by eye on the crop: 18 px (x 1233 to 1251 and 1352 to 1370); the ± is three pixels, the notch's edges being a pixel or two of grey
Photo 0.09 in ± 0.015 in
Primary Arms' 04-013-19032_03: the group from above, 2200 x 1467; a crop of x 1030 to 1160, y 870 to 980 at eight times, harvested
Scale: the forward counterbore's rim, .273 across (std.ar15.carrier_key_cbore_d): 83 px, 304 px/in. Read by the stretch of the counterbore's rim pushed in toward the head, each side: 27.5 px along the carrier
The rim's bulge, where the metal the notch displaced went: a little longer than the notch it came from.
The notch's own width where it is cut; the view from above reads the bulge of the rim beside it, which the displaced metal makes longer. The two agree within their ±.
"Properly staked gas key" (Primary Arms; Wing Tactical: "Properly staked gas keys"). The photos show it as a notch down the key's upper side wall at each screw, both sides: from above (ff833cef1e53) the counterbore's rim bulges into the head over a stretch centred on each screw, and from the right (255576c2e711) two notches stand in the key's side between its top and the step, 0.49 in apart at the scale below (the screws are .500 apart: std.ar15.carrier_key_screw_spacing), each centred on a screw. Drawn as a straight-sided notch cut through the wall above the step, as the side view shows its sides.
The key's staking: each notch's depth below the key's top0.048 in ± 0.01 in 1.2 mmProvisionalPhoto: Primary Arms' 04-013-19032_01, 2200 x 1467; the same crop
Photo 0.048 in ± 0.01 in used
Primary Arms' 04-013-19032_01, 2200 x 1467; the same crop, harvested
Scale: the serrations' pitch: 240.6 px/in (as stake_width); the key's top to its step, .059, reads 14 px. Read by from the key's top edge to the notch's bright floor, by eye on the crop: 11.5 to 12 px; the ± is the floor's two pixels and the photo standing a little above the key (its top face shows as a sliver)
Read on the side view, where the notch runs down the key's side from its top nearly to the step (.059 below the top: std.ar15.carrier_key_base_height less carrier_key_step_height, 14 px at this scale, which the step's line in the crop agrees with).
What it goes with
By the way it mounts, and the figures each part on file states: a part whose figures say it doesn't fit is left out, and one whose fit can't be checked from what is published is marked. A check is against published figures, not a guarantee.
Bolt carrier channel
- Uppers
- Aero Precision M4E1 Enhanced Upper Receiver Stripped, Aero Precision M4E1 Threaded upper receiver, BCM M4 Upper Receiver Assembly (w/ Laser T-Markings), Expo Arms 7075 Stripped AR-15 Upper Receiver, Geissele Automatics Super Duty Stripped Upper Receiver, Palmetto State Armory AR-15 Stripped Upper Receiver
Prices on file
Each seller's latest reading of its own page: before tax and shipping, and not a quote. The pages are read again every night.
- Scheels $228.00 Oct 20, 2026, in stock that day
- Primary Arms $235.00 Nov 21, 2026, in stock that day
- Wing Tactical $235.00 Nov 21, 2026, in stock that day
- MidwayUSA $247.00 Nov 21, 2026, in stock that day
- Impact Guns $252.39 Nov 21, 2026, in stock that day
- Rifle Supply $247.99 Nov 21, 2026, out of stock that day