Charging handle
Radian Weapons AR-15 / M16 Raptor-LT Ambidextrous Charging Handle
Radian's Raptor-LT: the Raptor with its two handles over-moulded in polymer. "Utilizing the same patented ambidextrous functionality as the Radian Raptor, the Raptor-LT handles are machined from 7075 aluminum, MILSPEC Type III hard anodized, then over-molded with high-strength, fiberglass reinforced polymer" (Midwest Gun Works, whose words for it the name is); "Same as the Standard but features aluminum latches over-molded with high-strength reinforced polymer." (T.REX ARMS). "FOR AR15/M16" is etched on its shaft, with two design patents' numbers (USD694354, USD705384; a later one in Primary Arms' photo of the grey has US10337811 and USD738452). Fit, as a seller says it: "*May NOT fit on some SIG AR's, specifically the 516 Model" (Wing Tactical; no SIG receiver is in the catalog, and nothing checks it). Radian's own page isn't read (it is drawn by script): the address here is a seller's page for exactly this number ("SKU: R0148 MPN: R0148", Primary Arms).

- Weight
- 1.2 oz ± 0.05 oz Conflictpublished: SpiceTac, The Ultimate Raptor Charging Handle Review - All Models: the reviewer's own weighing (David Blazek, of SpiceTac, a seller), with the photo of the black Raptor-LT on the scale (87793f6f6db2: the display reads 0:01.2 lb:oz), a review, read Oct 12, 2026Its sources span 0.18 oz to 4.8 oz.
- Lowest price
- $79.95 at Primary Arms, read Nov 21, 2026 (Black)
- Maker's number
- R0148
- Colours
- Black, Flat Dark Earth, Grey
- Drawn as
- modelled
- Maker's page
- primaryarms.com
In “Aero M4E1 Enhanced, pencil barrel”, a build on the start page, as it is.
Its figures
Every figure the site draws and checks it by, with where it came from. Open one for each source's reading, and why one is used where they differ.
The shaft: its shoulder (the front face of the ledge under the T's block) to the front hook's tip5.895 in ± 0.01 in 149.7 mmConfirmedWorked out: {radian-raptor-charging-handle.length}
Worked out 5.895 in ± 0.01 in used
{radian-raptor-charging-handle.length}, harvested
US Army TDP drawing 8448518 (Handle, Charging), rev G, side view: 5.600 and .295, as the Raptor's ledger has it.
The standard's, through the Raptor's ledger: no page states a length. "FOR AR15/M16" is etched on the LT's own shaft (Wing Tactical's close-up of its nose, 6cdc25a7e2eb; Primary Arms' R0148_00, a2724ae397a9), and the hook that pulls the carrier is where the standard's is. The LT's own photo from below reads it 5.97 at the shaft's own scale (the plan's check), 1% long, as the Raptor's and BCM's handles read by the same method.
The shaft's width0.4 in ± 0.005 in 10.2 mmConfirmedWorked out: {radian-raptor-charging-handle.shaft_width}
Worked out 0.4 in ± 0.005 in used
{radian-raptor-charging-handle.shaft_width}, harvested
US Army TDP drawing 8448518, plan view: .400 -B-.
The standard's, through the Raptor's ledger: the channel it runs in is the standard's ("FOR AR15/M16" on its shaft). It is the plan photo's scale; the photo's own check of that scale is the two guide lugs, which read the drawing's .488 across.
The shaft's thickness0.298 in ± 0.0035 in 7.6 mmConfirmedWorked out: {radian-raptor-charging-handle.shaft_thickness}
Worked out 0.2985 in ± 0.0035 in used
{radian-raptor-charging-handle.shaft_thickness}, harvested
US Army TDP drawing 8448518, side view: .2985 ±.0035.
The standard's, through the Raptor's ledger.
The right-hand handle's reach: its tip off the shaft's right side face, across1.148 in ± 0.02 in 29.2 mmProvisionalPhoto: Primary Arms: the black R0148 from below, on white, 2200 x 1467
Photo 1.148 in ± 0.02 in used
Primary Arms: the black R0148 from below, on white, 2200 x 1467, harvested
Scale: the shaft's width column by column (shaft_width). Read by the traced plan's furthest point to the handle's right, 1.348 off the shaft's centre line, less half the shaft's width; the photo from above (5d168cd4d6e1) has that tip at 1.356
No page states one. The two handles differ as the Raptor's latches do ("Note the Raptor's right side handle is extended more than the left to clear the forward assist button.", SpiceTac's review, of the Raptor); the left-hand one's is latch_reach_left. The Raptor's reads 1.15 by the same method: the polymer adds nothing to the reach.
The left-hand handle's reach: its tip off the shaft's left side face, across1.024 in ± 0.02 in 26 mmProvisionalPhoto: Primary Arms: the black R0148 from below, on white, 2200 x 1467
Photo 1.024 in ± 0.02 in used
Primary Arms: the black R0148 from below, on white, 2200 x 1467, harvested
Scale: the shaft's width column by column (shaft_width). Read by the traced plan's furthest point to the handle's left, 1.224 off the shaft's centre line, less half the shaft's width; the photo from above (5d168cd4d6e1) has that tip at 1.231
The T, side to side: across the two handles' tips2.573 in ± 0.038 in 65.4 mmProvisionalPhoto: Primary Arms: the black R0148 from below, on white, 2200 x 1467
Photo 2.573 in ± 0.038 in used
Primary Arms: the black R0148 from below, on white, 2200 x 1467, harvested
Scale: scale from radian-raptor-lt-charging-handle.shaft_width = 0.4 in, the tube's own width column by column: 110.6 px over columns 560–900, 110.8 px over columns 1000–1600, 110.0 px over columns 1830–1960; a line through them (rms 0.27 px) changes -0.3% from column 560 to 1960, so the photo is yawed and one scale would not do. Heights by each column's width; lengths by (u − 1100)/width, the lens's axis taken to meet the image at column 1100; 276.7 px/in there. The axis is the tube's centre line (tilt +0.02°, rms 0.15 px). Read by height of the traced outline (tools/trace.py); across the two handles' tips (their lower faces' edges)
The T, front to back: its rear face behind the shoulder1.059 in ± 0.02 in 26.9 mmCorroboratedPhoto: Primary Arms: the black R0148 from below, on white, 2200 x 1467
Photo 1.059 in ± 0.02 in used
Primary Arms: the black R0148 from below, on white, 2200 x 1467, harvested
Scale: scale from radian-raptor-lt-charging-handle.shaft_width = 0.4 in, the tube's own width column by column: 110.6 px over columns 560–900, 110.8 px over columns 1000–1600, 110.0 px over columns 1830–1960; a line through them (rms 0.27 px) changes -0.3% from column 560 to 1960, so the photo is yawed and one scale would not do. Heights by each column's width; lengths by (u − 1100)/width, the lens's axis taken to meet the image at column 1100; 276.7 px/in there. The axis is the tube's centre line (tilt +0.02°, rms 0.15 px). Read by −x_min of the traced outline (tools/trace.py); the T's rear face behind the shoulder, at the lower faces' edges
Photo 1.084 in ± 0.02 in
Primary Arms: the black R0148's T from above, on white, 2200 x 1467, harvested
Scale: the two pins' ends, 357.2 px apart for the 0.859 in the plan has between them: 415.9 px/in; placed in the plan by the two pins. Read by the T's rear between the handles: the first dark row of the photo (161) across columns 911 to 945 and on
The upper plate's rear edge, from above; the plan has the lower faces' edges, from below.
The plan the model is built from, at the photo's own scale. The photo from above, placed by the pins, has the T's rear 0.025 further back: inside the two readings' ±, and kept.
A handle's height: its upper face above its lower face0.37 in ± 0.03 in 9.4 mmProvisionalPhoto: Primary Arms: the black R0148 from ahead of its right side and above, on white, 2200 x 1467
Photo 0.37 in ± 0.03 in used
Primary Arms: the black R0148 from ahead of its right side and above, on white, 2200 x 1467, harvested
Scale: a camera fitted to the photo (a copy on file 33 marks of the laser marking on the plane of the shaft's top, the centroids of nine letters and of the logo's two pieces and of each one's quarter nearest either side, each placed in the plan through the photo from above, 5d168cd4d6e1; the shaft's lower near edge at the Army drawing's .400 by .2985 section; the hook's rear lower corner at the drawing's 5.600 and .275; one focal length; 0.8 px rms; the lens 19 in from the shoulder and 29 degrees above the handle; a pixel is 0.0036 in of height at the handle). Read by the near handle's front face unwrapped through the camera (scratch/heights.py, heights3.py: upright lines through 145 points along the plan's front edge, sampled in the photo): the white ground begins at 0.096 below the channel's axis (quartiles 0.092 to 0.100), the grooves down the face read darker than the ribs between them up to 0.236 above it, and the lit top face's rim runs from there to the panel's edge 0.125 higher in the strip, for 0.099 across in the photo from above seen from 29 degrees: the face's upper edge is broken by about 0.023, the upper face 0.268 above the axis. The ± is that edge break, and 0.02 for the handle turned a little on its pin (the strip taken 0.03 either side of the plan's edge moves both edges 0.03 together)
The polymer handles are blocks with upright walls, taller than the shaft is thick; their upper faces come out about level with the upper plate's top (0.415 over the shaft's underside by this and latch_lift, the plate's 0.40), as Wing Tactical's close-up from behind has them (3231df18cd03). The Raptor's aluminium latches read 0.359 by its own fitted camera: the same within the two readings' ±. A second reading through the same camera, the handle's silhouette against the edges of its two faces, came out 0.30 and is not kept: its edges are toothed, and it changes by a third of a pixel for a hundredth of an inch.
A handle's lower face above the shaft's underside0.045 in ± 0.015 in 1.1 mmProvisionalPhoto: Primary Arms: the black R0148 from ahead of its right side and above, on white, 2200 x 1467
Photo 0.045 in ± 0.015 in used
Primary Arms: the black R0148 from ahead of its right side and above, on white, 2200 x 1467, harvested
Scale: a camera fitted to the photo (a copy on file 33 marks of the laser marking on the plane of the shaft's top, the centroids of nine letters and of the logo's two pieces and of each one's quarter nearest either side, each placed in the plan through the photo from above, 5d168cd4d6e1; the shaft's lower near edge at the Army drawing's .400 by .2985 section; the hook's rear lower corner at the drawing's 5.600 and .275; one focal length; 0.8 px rms; the lens 19 in from the shoulder and 29 degrees above the handle; a pixel is 0.0036 in of height at the handle). Read by the near handle's lower edge against the white ground, through the camera: 0.096 below the channel's axis along its front face (145 upright lines, quartiles 0.092 to 0.100) and 0.122 round its tip (0.104 to 0.128); between the two, 0.105, the shaft's underside being 0.149 below the axis
The handles' lower faces stand above the shaft's underside. The Raptor's reads 0.022 by its own camera.
The panel sunk in each handle's upper face: how far its floor is below the face0.075 in ± 0.025 in 1.9 mmProvisionalPhoto: Wing Tactical: a Flat Dark Earth one in a rifle, from behind and a little above and to the left, 1280 x 1280
Photo 0.075 in ± 0.025 in used
Wing Tactical: a Flat Dark Earth one in a rifle, from behind and a little above and to the left, 1280 x 1280, harvested
Scale: the left handle's own height in the same view, its upper face's rear edge to its lower edge beside the ribs: 115 px for latch_height. Read by the panel's far wall, lit, from its rim to the floor: 24 px (rows 548 to 572 at columns 300 to 400); a same-distance ratio, the lens about 15 degrees above the handle
A lower bound if the near rim hides the wall's foot: the floor shows in the photo, so taken as the depth.
The panel in each upper face is a deep one (the handles' cores have openings under them: Wing Tactical's x-ray banner); the one in each lower face is shallow and isn't measured. Through the fitted camera the wall's shadow in Primary Arms' oblique photo reads 0.06 to 0.15 by where the rim is taken to be: no better.
The T's height: the upper plate's top above the shaft's underside0.4 in ± 0.02 in 10.2 mmCorroboratedWorked out: {radian-raptor-charging-handle.t_height}
Worked out 0.4 in ± 0.02 in used
{radian-raptor-charging-handle.t_height}, harvested
The Raptor's, read on Wing Tactical's photo of that handle from behind and on its design patent's two side views (D694,354, the number etched on the LT's shaft too).
The T's aluminium body is the Raptor's: T.REX ARMS' page for the family says of the LT: "Same as the Standard but features aluminum latches over-molded with high-strength reinforced polymer." (https://www.trex-arms.com/store/Radian-Weapons-Raptor-Charging-Handle/), and the Raptor's upper plate, the arc at its front and its block, carried by the two pivot pins, lie on the LT's own in Primary Arms' photo of it from above (5d168cd4d6e1; a copy on file), within 2 px of 416 to the inch. No photo of the LT is square to its side; Wing Tactical's close-up of the grey one from behind (3231df18cd03) shows the same stack between the handles: an upper plate, the two tongues, a lower plate.
The upper plate's thickness at the T's rear: its top down to the handles' tongues under it0.176 in ± 0.02 in 4.5 mmProvisionalWorked out: {radian-raptor-charging-handle.upper_plate_thickness}
Worked out 0.176 in ± 0.02 in used
{radian-raptor-charging-handle.upper_plate_thickness}, harvested
The Raptor's, a same-plane ratio on Wing Tactical's photo of that handle from behind.
The T's aluminium body is the Raptor's: T.REX ARMS' page for the family says of the LT: "Same as the Standard but features aluminum latches over-molded with high-strength reinforced polymer." (https://www.trex-arms.com/store/Radian-Weapons-Raptor-Charging-Handle/), and the Raptor's upper plate, the arc at its front and its block, carried by the two pivot pins, lie on the LT's own in Primary Arms' photo of it from above (5d168cd4d6e1; a copy on file), within 2 px of 416 to the inch.
The lower plate's thickness: its top above the shaft's underside. It is the ledge that runs on to the shoulder under the block's front face0.086 in ± 0.01 in 2.2 mmCorroboratedWorked out: {radian-raptor-charging-handle.lower_plate_thickness}
Worked out 0.086 in ± 0.01 in used
{radian-raptor-charging-handle.lower_plate_thickness}, harvested
The Raptor's, from its design patent's two side views.
The T's aluminium body is the Raptor's: T.REX ARMS' page for the family says of the LT: "Same as the Standard but features aluminum latches over-molded with high-strength reinforced polymer." (https://www.trex-arms.com/store/Radian-Weapons-Raptor-Charging-Handle/), and the Raptor's upper plate, the arc at its front and its block, carried by the two pivot pins, lie on the LT's own in Primary Arms' photo of it from above (5d168cd4d6e1; a copy on file), within 2 px of 416 to the inch.
The block's front face (where its top, as thick as the shaft, ends over the ledge): how far behind the shoulder0.112 in ± 0.012 in 2.8 mmProvisionalWorked out: {radian-raptor-charging-handle.block_front_behind_shoulder}
Worked out 0.112 in ± 0.012 in used
{radian-raptor-charging-handle.block_front_behind_shoulder}, harvested
The Raptor's, read on Primary Arms' photo of that handle from above.
The T's aluminium body is the Raptor's: T.REX ARMS' page for the family says of the LT: "Same as the Standard but features aluminum latches over-molded with high-strength reinforced polymer." (https://www.trex-arms.com/store/Radian-Weapons-Raptor-Charging-Handle/), and the Raptor's upper plate, the arc at its front and its block, carried by the two pivot pins, lie on the LT's own in Primary Arms' photo of it from above (5d168cd4d6e1; a copy on file), within 2 px of 416 to the inch. The LT's own photo from above shows the same step: the shadowed band between the block's top and the ledge's front edge is 31 px there (rows 573 to 604 beside the shaft: 0.075 in at 415.9 px/in), and 33 px in the Raptor's photo taken the same way (0.077 at 429.9): the Raptor's own figure counts the block's edge break and the ledge's soft edge with it (rows 600 to 648).
The latch's hook arm (what catches the receiver, on the left): its underside above the shaft's underside0.086 in ± 0.01 in 2.2 mmProvisionalWorked out: {radian-raptor-charging-handle.catch_bottom}
Worked out 0.086 in ± 0.01 in used
{radian-raptor-charging-handle.catch_bottom}, harvested
The Raptor's, from its design patent's broken lines.
The T's aluminium body is the Raptor's: T.REX ARMS' page for the family says of the LT: "Same as the Standard but features aluminum latches over-molded with high-strength reinforced polymer." (https://www.trex-arms.com/store/Radian-Weapons-Raptor-Charging-Handle/), and the Raptor's upper plate, the arc at its front and its block, carried by the two pivot pins, lie on the LT's own in Primary Arms' photo of it from above (5d168cd4d6e1; a copy on file), within 2 px of 416 to the inch. On the LT the hook arm is the left handle's aluminium core, bare of polymer and black (Primary Arms' R0149_03).
The latch's hook arm: its top above the shaft's underside0.217 in ± 0.01 in 5.5 mmProvisionalWorked out: {radian-raptor-charging-handle.catch_top}
Worked out 0.217 in ± 0.01 in used
{radian-raptor-charging-handle.catch_top}, harvested
The Raptor's, from its design patent's broken lines.
The T's aluminium body is the Raptor's: T.REX ARMS' page for the family says of the LT: "Same as the Standard but features aluminum latches over-molded with high-strength reinforced polymer." (https://www.trex-arms.com/store/Radian-Weapons-Raptor-Charging-Handle/), and the Raptor's upper plate, the arc at its front and its block, carried by the two pivot pins, lie on the LT's own in Primary Arms' photo of it from above (5d168cd4d6e1; a copy on file), within 2 px of 416 to the inch.
The flat along the shaft's top, between its two chamfers0.205 in ± 0.01 in 5.2 mmProvisionalWorked out: {radian-raptor-charging-handle.top_flat_width}
Worked out 0.205 in ± 0.01 in used
{radian-raptor-charging-handle.top_flat_width}, harvested
The Raptor's, read on Primary Arms' photo of that handle from above.
The T's aluminium body is the Raptor's: T.REX ARMS' page for the family says of the LT: "Same as the Standard but features aluminum latches over-molded with high-strength reinforced polymer." (https://www.trex-arms.com/store/Radian-Weapons-Raptor-Charging-Handle/), and the Raptor's upper plate, the arc at its front and its block, carried by the two pivot pins, lie on the LT's own in Primary Arms' photo of it from above (5d168cd4d6e1; a copy on file), within 2 px of 416 to the inch. The LT's marking is on the same flat (RADIAN RAPTOR-LT, the patents' numbers, FOR AR15/M16).
The shaft's top chamfers: how far below the top their lower edges are0.06 in ± 0.005 in 1.5 mmProvisionalWorked out: {radian-raptor-charging-handle.top_chamfer_drop}
Worked out 0.06 in ± 0.005 in used
{radian-raptor-charging-handle.top_chamfer_drop}, harvested
The Raptor's, from its design patent's side views.
The T's aluminium body is the Raptor's: T.REX ARMS' page for the family says of the LT: "Same as the Standard but features aluminum latches over-molded with high-strength reinforced polymer." (https://www.trex-arms.com/store/Radian-Weapons-Raptor-Charging-Handle/), and the Raptor's upper plate, the arc at its front and its block, carried by the two pivot pins, lie on the LT's own in Primary Arms' photo of it from above (5d168cd4d6e1; a copy on file), within 2 px of 416 to the inch.
The shaft's top chamfers: where they begin, ahead of the shoulder0.226 in ± 0.015 in 5.7 mmProvisionalWorked out: {radian-raptor-charging-handle.top_chamfer_from_shoulder}
Worked out 0.226 in ± 0.015 in used
{radian-raptor-charging-handle.top_chamfer_from_shoulder}, harvested
The Raptor's, read on Primary Arms' photo of that handle from above.
The T's aluminium body is the Raptor's: T.REX ARMS' page for the family says of the LT: "Same as the Standard but features aluminum latches over-molded with high-strength reinforced polymer." (https://www.trex-arms.com/store/Radian-Weapons-Raptor-Charging-Handle/), and the Raptor's upper plate, the arc at its front and its block, carried by the two pivot pins, lie on the LT's own in Primary Arms' photo of it from above (5d168cd4d6e1; a copy on file), within 2 px of 416 to the inch. In the LT's photo from above the chamfers come in over the same stretch (their lit band first shows about row 700, 0.23 ahead of the ledge's front edge).
The shaft's top chamfers: where they have reached their full width, ahead of the shoulder0.377 in ± 0.015 in 9.6 mmProvisionalWorked out: {radian-raptor-charging-handle.top_chamfer_full_from_shoulder}
Worked out 0.377 in ± 0.015 in used
{radian-raptor-charging-handle.top_chamfer_full_from_shoulder}, harvested
The Raptor's, read on Primary Arms' photo of that handle from above.
The T's aluminium body is the Raptor's: T.REX ARMS' page for the family says of the LT: "Same as the Standard but features aluminum latches over-molded with high-strength reinforced polymer." (https://www.trex-arms.com/store/Radian-Weapons-Raptor-Charging-Handle/), and the Raptor's upper plate, the arc at its front and its block, carried by the two pivot pins, lie on the LT's own in Primary Arms' photo of it from above (5d168cd4d6e1; a copy on file), within 2 px of 416 to the inch.
The key's channel under the shaft: its width0.312 in ± 0.005 in 7.9 mmConfirmedWorked out: {radian-raptor-charging-handle.channel_width}
Worked out 0.312 in ± 0.005 in used
{radian-raptor-charging-handle.channel_width}, harvested
US Army TDP drawing 8448518 (Handle, Charging), rev G, Section A-A: .312, with FULL R.
The standard's, through the Raptor's ledger: the shaft is made to run in the standard channel and pull the standard carrier ("FOR AR15/M16" on it), and Primary Arms' photo of the LT from below shows the key's channel, the two guide lugs and the hook's block where the drawing has them.
The key's channel: its depth from the shaft's underside to the top of its round roof0.25 in ± 0.005 in 6.3 mmConfirmedWorked out: {radian-raptor-charging-handle.channel_depth}
Worked out 0.25 in ± 0.005 in used
{radian-raptor-charging-handle.channel_depth}, harvested
US Army TDP drawing 8448518, Section A-A: .250.
The standard's, through the Raptor's ledger: the shaft is made to run in the standard channel and pull the standard carrier ("FOR AR15/M16" on it), and Primary Arms' photo of the LT from below shows the key's channel, the two guide lugs and the hook's block where the drawing has them.
The front hook: its rear face to its tip0.295 in ± 0.005 in 7.5 mmConfirmedWorked out: {radian-raptor-charging-handle.hook_length}
Worked out 0.295 in ± 0.005 in used
{radian-raptor-charging-handle.hook_length}, harvested
US Army TDP drawing 8448518, side view: .295.
The standard's, through the Raptor's ledger: the shaft is made to run in the standard channel and pull the standard carrier ("FOR AR15/M16" on it), and Primary Arms' photo of the LT from below shows the key's channel, the two guide lugs and the hook's block where the drawing has them.
The front hook: how far it hangs below the shaft's underside0.275 in ± 0.005 in 7 mmConfirmedWorked out: {radian-raptor-charging-handle.hook_drop}
Worked out 0.275 in ± 0.005 in used
{radian-raptor-charging-handle.hook_drop}, harvested
US Army TDP drawing 8448518, side view: .275 -C-.
The standard's, through the Raptor's ledger: the shaft is made to run in the standard channel and pull the standard carrier ("FOR AR15/M16" on it), and Primary Arms' photo of the LT from below shows the key's channel, the two guide lugs and the hook's block where the drawing has them.
The front hook: the round between its rear face and the shaft's underside0.187 in ± 0.005 in 4.7 mmConfirmedWorked out: {radian-raptor-charging-handle.hook_fillet_r}
Worked out 0.187 in ± 0.005 in used
{radian-raptor-charging-handle.hook_fillet_r}, harvested
US Army TDP drawing 8448518, side view: .187 R.
The standard's, through the Raptor's ledger: the shaft is made to run in the standard channel and pull the standard carrier ("FOR AR15/M16" on it), and Primary Arms' photo of the LT from below shows the key's channel, the two guide lugs and the hook's block where the drawing has them.
Across the two guide lugs near the shaft's front end0.488 in ± 0.005 in 12.4 mmConfirmedWorked out: {radian-raptor-charging-handle.guide_lug_width}
Worked out 0.488 in ± 0.005 in used
{radian-raptor-charging-handle.guide_lug_width}, harvested
US Army TDP drawing 8448518, end view: .488.
The standard's, through the Raptor's ledger: the shaft is made to run in the standard channel and pull the standard carrier ("FOR AR15/M16" on it), and Primary Arms' photo of the LT from below shows the key's channel, the two guide lugs and the hook's block where the drawing has them. The LT's plan reads them at that width (the trace's check).
The guide lugs' height, from the shaft's underside up0.119 in ± 0.002 in 3 mmConfirmedWorked out: {radian-raptor-charging-handle.guide_lug_height}
Worked out 0.119 in ± 0.002 in used
{radian-raptor-charging-handle.guide_lug_height}, harvested
US Army TDP drawing 8448518, end view: .119 ±.002.
The standard's, through the Raptor's ledger: the shaft is made to run in the standard channel and pull the standard carrier ("FOR AR15/M16" on it), and Primary Arms' photo of the LT from below shows the key's channel, the two guide lugs and the hook's block where the drawing has them.
The key's channel: how far behind the shoulder its round rear end reaches, under the T's block0.171 in ± 0.012 in 4.3 mmProvisionalWorked out: {radian-raptor-charging-handle.channel_rear_behind_shoulder}
Worked out 0.171 in ± 0.012 in used
{radian-raptor-charging-handle.channel_rear_behind_shoulder}, harvested
The Raptor's, read on Primary Arms' photo of that handle from below.
The T's aluminium body is the Raptor's: T.REX ARMS' page for the family says of the LT: "Same as the Standard but features aluminum latches over-molded with high-strength reinforced polymer." (https://www.trex-arms.com/store/Radian-Weapons-Raptor-Charging-Handle/), and the Raptor's upper plate, the arc at its front and its block, carried by the two pivot pins, lie on the LT's own in Primary Arms' photo of it from above (5d168cd4d6e1; a copy on file), within 2 px of 416 to the inch. In the LT's photo from below the channel's round end is under the block as the Raptor's is (about column 375, the shoulder at 421.5: 0.17).
The handles' pivot pins: their ends' diameter0.06 in ± 0.008 in 1.5 mmProvisionalWorked out: {radian-raptor-charging-handle.pin_d}
Worked out 0.06 in ± 0.008 in used
{radian-raptor-charging-handle.pin_d}, harvested
The Raptor's, read on Primary Arms' photo of that handle from above.
The T's aluminium body is the Raptor's: T.REX ARMS' page for the family says of the LT: "Same as the Standard but features aluminum latches over-molded with high-strength reinforced polymer." (https://www.trex-arms.com/store/Radian-Weapons-Raptor-Charging-Handle/), and the Raptor's upper plate, the arc at its front and its block, carried by the two pivot pins, lie on the LT's own in Primary Arms' photo of it from above (5d168cd4d6e1; a copy on file), within 2 px of 416 to the inch. The LT's pins show as the same bright rings in dark counterbores, 0.859 apart in its plan (the Raptor's: 0.856).
The ribs down each handle's rear face: how many5ProvisionalPhoto: Primary Arms: the black R0148's T from above, on white, 2200 x 1467
Photo 5 count used
Primary Arms: the black R0148's T from above, on white, 2200 x 1467, harvested
Scale: none: a count. Read by the lobes along each handle's rear edge on gridded enlargements (scratch/g_bayR.png, g_bayL.png): five on the right handle, five on the left
Counted on views that show the whole face: five lobes standing out of each handle's rear edge in Primary Arms' photo from above and five in its photo from below, five upright ribs on the left handle's rear face in Wing Tactical's photo from behind (aab96ff5153e) and five on the right handle's (34a97ed88212, with Radian's mark moulded in beyond them). Ribs, not grooves: they stand out of the outline seen from above (a groove would notch it).
The ribs down each handle's rear face: their pitch along the face0.096 in ± 0.004 in 2.4 mmProvisionalPhoto: Primary Arms: the black R0148's T from above, on white, 2200 x 1467
Photo 0.096 in ± 0.004 in used
Primary Arms: the black R0148's T from above, on white, 2200 x 1467, harvested
Scale: the two pins' ends, 357.2 px apart for the 0.859 in the plan has between them: 415.9 px/in. Read by the five lobes' crests on each handle: eight spacings, 0.090 to 0.102, mean 0.096
The ribs down each handle's rear face: half their width (each is drawn as a round)0.012 in ± 0.004 in 0.3 mmProvisionalPhoto: Primary Arms: the black R0148's T from above, on white, 2200 x 1467
Photo 0.012 in ± 0.004 in used
Primary Arms: the black R0148's T from above, on white, 2200 x 1467, harvested
Scale: the two pins' ends: 415.9 px/in. Read by a lobe is about 10 px across where it leaves the edge's line (scratch/g_bayR.png at 6x)
The ribs down each handle's rear face: how far their crests stand off the face0.015 in ± 0.004 in 0.4 mmProvisionalPhoto: Primary Arms: the black R0148's T from above, on white, 2200 x 1467
Photo 0.015 in ± 0.004 in used
Primary Arms: the black R0148's T from above, on white, 2200 x 1467, harvested
Scale: the two pins' ends: 415.9 px/in. Read by the edge between two lobes lies 6 to 7 px inside the line through their crests (three places on the right handle)
The grooves down the right-hand handle's front face: how many7ProvisionalPhoto: Primary Arms: the black R0148's T from above, on white, 2200 x 1467
Photo 7 count used
Primary Arms: the black R0148's T from above, on white, 2200 x 1467, harvested
Scale: none: a count. Read by the dips of the right handle's front edge between its tip and its root: seven
Counted on the front edge's own profile in the photo from above (a copy on file, teeth2.py: a line walked beside the edge, how far the edge lies inside it every pixel; a groove is where it dips in): seven dips on the right handle, 39 px apart. The plan, traced from below, has seven teeth there too. Through the fitted camera the near handle's face in Primary Arms' oblique photo (a2724ae397a9) shows those seven and a finer line between each two (scratch/count.py: ten dark lines, 0.045 apart where both kinds are plain): the finer ones don't notch the edge seen from above, and aren't drawn.
The grooves down the left-hand handle's front face: how many6ProvisionalPhoto: Primary Arms: the black R0148's T from above, on white, 2200 x 1467
Photo 6 count used
Primary Arms: the black R0148's T from above, on white, 2200 x 1467, harvested
Scale: none: a count. Read by the dips of the left handle's front edge between its root and its tip: six
The left handle is the shorter by an eighth of an inch, and has one groove fewer: six dips in the same profile (the outermost a shallow one), then the tip's round. The plan has six teeth there.
The grooves down each handle's front face: their pitch along the face0.095 in ± 0.002 in 2.4 mmProvisionalPhoto: Primary Arms: the black R0148's T from above, on white, 2200 x 1467
Photo 0.095 in ± 0.002 in used
Primary Arms: the black R0148's T from above, on white, 2200 x 1467, harvested
Scale: the two pins' ends, 357.2 px apart for the 0.859 in the plan has between them: 415.9 px/in. Read by the dips' centres on each handle's front edge: 39.2 px apart on the right handle (38.5 to 39.8), 39.8 on the left
The grooves down each handle's front face: their width at half their depth0.043 in ± 0.006 in 1.1 mmProvisionalPhoto: Primary Arms: the black R0148's T from above, on white, 2200 x 1467
Photo 0.043 in ± 0.006 in used
Primary Arms: the black R0148's T from above, on white, 2200 x 1467, harvested
Scale: the two pins' ends, 357.2 px apart for the 0.859 in the plan has between them: 415.9 px/in. Read by a dip in the edge's profile is 16 to 20 px wide at half its depth (the right handle's four middle grooves, read every 4 px), a rib between two 19 to 23
The grooves down each handle's front face: their depth below the ribs' crests0.024 in ± 0.004 in 0.6 mmProvisionalPhoto: Primary Arms: the black R0148's T from above, on white, 2200 x 1467
Photo 0.024 in ± 0.004 in used
Primary Arms: the black R0148's T from above, on white, 2200 x 1467, harvested
Scale: the two pins' ends, 357.2 px apart for the 0.859 in the plan has between them: 415.9 px/in. Read by a dip's floor lies 9 to 11 px inside the crests either side of it (the right handle's five middle grooves; the left's 10 to 12, its outermost 8)
Seen from above: the depth at the upper face's edge, which is broken; down the face the grooves may be deeper.
What it goes with
By the way it mounts, and the figures each part on file states: a part whose figures say it doesn't fit is left out, and one whose fit can't be checked from what is published is marked. A check is against published figures, not a guarantee.
Charging handle channel
- Uppers
- Aero Precision M4E1 Enhanced Upper Receiver Stripped, Aero Precision M4E1 Threaded upper receiver, BCM M4 Upper Receiver Assembly (w/ Laser T-Markings), Expo Arms 7075 Stripped AR-15 Upper Receiver, Geissele Automatics Super Duty Stripped Upper Receiver, Palmetto State Armory AR-15 Stripped Upper Receiver
Prices on file
Each seller's latest reading of its own page: before tax and shipping, and not a quote. The pages are read again every night.
- Primary Arms $79.95 Black Nov 21, 2026, in stock that day
- AR15Discounts $79.95 Black Nov 21, 2026, stock not said
- Impact Guns $79.95 Black Nov 21, 2026, in stock that day
- MidwayUSA $79.95 Black Nov 21, 2026, in stock that day
- T.REX ARMS $79.95 Black Nov 21, 2026, in stock that day
- Primary Arms $84.95 Flat Dark Earth Nov 21, 2026, in stock that day
- Midwest Gun Works $84.95 Flat Dark Earth Nov 21, 2026, in stock that day
- Midwest Gun Works $84.95 Grey Nov 21, 2026, in stock that day
- AR15Discounts $84.95 Flat Dark Earth Nov 21, 2026, stock not said
- AR15Discounts $84.95 Grey Nov 21, 2026, stock not said
- Impact Guns $84.95 Flat Dark Earth Nov 21, 2026, in stock that day
- Impact Guns $84.95 Grey Nov 21, 2026, in stock that day
- Right To Bear $84.95 Grey Nov 21, 2026, in stock that day
- MidwayUSA $84.95 Flat Dark Earth Nov 21, 2026, in stock that day
- MidwayUSA $84.95 Grey Nov 21, 2026, in stock that day
- T.REX ARMS $84.95 Flat Dark Earth Nov 21, 2026, in stock that day
- Sportsman's Warehouse $74.99 Black Nov 21, 2026, out of stock that day
- Midwest Gun Works $79.95 Black Nov 21, 2026, out of stock that day
- Primary Arms $84.95 Grey Nov 21, 2026, out of stock that day