Red dot mount
Unity Tactical FAST Micro Mount, 2.26 in optical centerline
Unity Tactical's riser for an Aimpoint Micro-footprint red dot: "The optical centerline of the mount is a nominal 2.26” above the rail" (the maker's launch text), "about 1/3" higher than other popular 1.93" mounts", for shooting in a gas mask or with ear protection on. Built into it are a "standard 1.42” height, windage-adjustable back up rear iron sight as well as an optional elevation adjustable front sight", 1.27 in apart. It clamps to the rail by "a no-snag dual cross-bolt clamp" and a rail-grabber bar (a QD lever from ADM can take the bar's place, sold separately). 7075-T6, Type III hardcoat anodized; 3.0 oz. unitytactical.com refuses the reader: the page linked is Primary Arms' for the black one.

- Weight
- 3 oz ± 0.05 oz Conflictpublished: Soldier Systems Daily, Unity Tactical announces FAST optics mounts (2019-01-19): the maker's launch text, a review, read Nov 3, 2026Its sources span 2.95 oz to 3.55 oz.
- Lowest price
- $186.00 at Primary Arms, read Nov 21, 2026 (Black)
- Maker's number
- FST-MICB
- Colours
- Black, Flat Dark Earth
- Drawn as
- modelled
- Maker's page
- primaryarms.com
In “22RB .22 LR rifle”, a build on the start page, in place of its Holosun 1.63 in lower 1/3 co-witness pedestal mount (HS-MOUNT-AR-RISER-ARO).
Its figures
Every figure the site draws and checks it by, with where it came from. Open one for each source's reading, and why one is used where they differ.
The maker's optical centerline over the rail (2.26 in; given for no named dot)2.26 in ± 0.005 in 57.4 mmCorroboratedPublished: Soldier Systems Daily, Unity Tactical announces FAST optics mounts (2019-01-19): the maker's launch text as printed there, a review, read Nov 3, 2026
Published “The optical centerline of the mount is a nominal 2.26” above the rail.” used
Soldier Systems Daily, Unity Tactical announces FAST optics mounts (2019-01-19): the maker's launch text as printed there, a review, read Nov 3, 2026 the page, harvested Nov 3, 2026
Published “A 2.26” optical centerline height provides faster/easier reticle acquisition”
Arisaka Defense, Unity FAST Micro Mount, a seller, read Nov 3, 2026 the page, harvested Nov 3, 2026
Published “Mount Height 2.26 in.”
Primary Arms, Unity Tactical FAST - Aimpoint Micro Mount - Black (specifications), a seller, read Nov 3, 2026 the page, harvested Nov 3, 2026
Published “Height: 2.26" to optical centerline”
Mile High Shooting, Unity Tactical: FAST Micro, Red Dot Mount, 2.26", a seller, read Nov 3, 2026 the page, harvested Nov 3, 2026
The maker's own launch text; three sellers repeat it. Primary Arms' FDE page has "higher than other mounts at 2.2666”" in its description, the same figure with a digit repeated.
"Nominal" in the maker's own words, and "for most optics" where a seller says what it is for; no page names the dot. Unity's "Specs & Data" graphic draws an Aimpoint Micro-shaped dot (side cap, front and rear caps) with the 2.26 in to its axis from the line the 1.42 in also starts at (the rail's top), and sellers sell it as "designed for Aimpoint T1 red dot sights" (Primary Arms). It is taken as the figure for an Aimpoint Micro T-1/T-2 (deck_above_rail says so).
The deck's top (where the dot's base sits) above the rail's top1.671 in ± 0.04 in 42.4 mmConflictWorked out: {.optical_height} - {aimpoint-micro-t-2.axis_above_base}
Worked out 1.671 in ± 0.04 in used
{.optical_height} - {aimpoint-micro-t-2.axis_above_base}, harvested
Photo 1.708 in ± 0.03 in
Unity's "FAST Micro Series Optic Mount Specs & Data" graphic, as Big Tex Ordnance hosts it: FAST-Micro-Specs-510x394-1.jpg; its side view, the right side, with a dot on it, harvested
Scale: the maker's 2.26 in, drawn from the base line (the line the 1.42 in starts at, the rail's top) to the dot's axis: 112.5 px (450 px on a 4x enlargement), 49.8 px/in. Read by the base line (row 176.3 of the original) to the mount's top line, the seam under the dot's base (row 91.3): 85 px. The ± is a pixel at each line. The dot drawn on it then has its axis 0.55 in over its base
Photo 1.775 in ± 0.03 in
the maker's graphic, its side and end views, harvested
Scale: the maker's 2.01 in (overall_height), drawn in the end view from the jaws' feet to the mount's top: 96.75 px of the original (387 on the 4x enlargement), 48.1 px/in. Read by the base line to the mount's top line in the side view (85 px) and in the end view (85 px), at the scale the 2.01 in sets; the same lines put the jaws' feet 0.235 in under the rail's top (clamp_below_rail)
Photo 1.71 in ± 0.05 in
TNVC, FAST-Micro-T2-front, 430 x 670: the black mount with a T-2 on it, on a short rail, end on from a little above, harvested
Scale: the maker's 2.01 in (overall_height) from the jaws' feet to the seam under the dot's base: 135 px (405 on a 3x enlargement), 67.2 px/in; the clamp across, 1.30 in (width), reads 1.317 at that scale. Read by the rail's top, where its head shows between the jaws (row 256.7), to the seam under the dot's base (row 141.7): 115 px. The ± is the rail's top, which the jaws hide but for its middle. The T-2's lens's middle is then 0.62 in over its base, against its own 0.589 ± 0.037
The maker's height is the figure that sets a dot's axis, and with it the T-2 (the dot sellers name it for) stands at 2.26 in. The graphic scaled by its own 2.26 in and TNVC's end photo agree with it within their ±. The graphic scaled by its 2.01 in disagrees by 0.10 in: the graphic's two vertical figures can't both be to its drawing (4% apart), and at that scale the dot drawn on it would stand at 2.35 in. Kept, and visible, because the photo of the right side has the cross bolts' axis 1.755 in under the deck's top, which with the deck adopted is 0.08 in under the rail's top (with the 2.01 scale's 1.775, at it, as Reptilia's are on theirs): what settles it is a measured review or the maker's drawing with the deck dimensioned.
t-2 and graphic-height differ by 0.104 in beyond what each states it is good to.
graphic-axis and graphic-height differ by 0.067 in beyond what each states it is good to.
No page gives it. Worked out from the maker's 2.26 in as a T-1/T-2's axis (an assumption, said in its basis), and read three ways on the maker's graphic and TNVC's end photo. The graphic's own figures don't agree with its drawing to better than 4% (its 2.26 in spans 450 px of its 4x enlargement, its 2.01 in 385 px, its 2.08 in 407 px across), so each reading names the figure it is scaled by.
The footprint's middle along the deck, ahead of the clamp's middle0 in ± 0.012 in 0 mmProvisionalPhoto: Rifle Supply's UTYFST-MICF_1_HR, 2000 x 2000: the FDE mount's right side, square on from a little above, its deck in view
Photo 0 in ± 0.012 in used
Rifle Supply's UTYFST-MICF_1_HR, 2000 x 2000: the FDE mount's right side, square on from a little above, its deck in view, harvested
Scale: the mount's length, mount_length = 2.08 in, over the silhouette's 1727 px (columns 144 to 1870): 830.3 px/in. Read by the recoil boss on the deck (its ends at columns 905 and 1083 on a crop of the top: its middle 994) against the middle between the two cross bolts' heads (their dark discs' centres of mass at -0.769 and +0.781 in from the silhouette's middle: 1007 + 830.3 x 0.006): 0.010 in behind, within the ± of the two pixels' readings
The recoil boss in the middle of the deck (in every view from above: the instruction sheet's drawings, the obliques) is what the dot's base is located by.
Length along the rail2.08 in ± 0.005 in 52.8 mmConflictPublished: Arisaka Defense, Unity FAST Micro Mount, a seller, read Nov 3, 2026
Published “DIMENSIONS: 2.08″(L) x 1.30″(W) x 2.01″(H)” used
Arisaka Defense, Unity FAST Micro Mount, a seller, read Nov 3, 2026 the page, harvested Nov 3, 2026
Photo “2.08" (the side view's length along its base)”
Unity's Specs & Data graphic: the figure as printed on it, harvested
Scale: none: the maker's printed figure. Read by the dimension written under the side view, between extension lines at the mount's two ends
Published “Dimensions: 2 x 1.3 x 2 in”
TNVC, Unity FAST Micro Mount (specs), a seller, read Nov 3, 2026 the page, harvested Nov 3, 2026
Published “Dimensions (W X L X H): IN: < 1.4 X 2.2 X 2.1”
Mile High Shooting, Unity Tactical: FAST Micro, Red Dot Mount, 2.26", a seller, read Nov 3, 2026 the page, harvested Nov 3, 2026
The maker's own figure, printed on its graphic; TNVC's is it rounded, and Mile High's "<" figures are bounds.
arisaka and mile-high differ by 0.12 in beyond what each states it is good to.
graphic and mile-high differ by 0.12 in beyond what each states it is good to.
Width across the clamp (the rail-grabber's outer face to the bolts' band on the right)1.3 in ± 0.005 in 33 mmCorroboratedPublished: Arisaka Defense, Unity FAST Micro Mount, a seller, read Nov 3, 2026
Published “DIMENSIONS: 2.08″(L) x 1.30″(W) x 2.01″(H)” used
Arisaka Defense, Unity FAST Micro Mount, a seller, read Nov 3, 2026 the page, harvested Nov 3, 2026
Published “Dimensions: 2 x 1.3 x 2 in”
TNVC, Unity FAST Micro Mount (specs), a seller, read Nov 3, 2026 the page, harvested Nov 3, 2026
The maker's figure as its graphic prints it ("1.30"" across the clamp in the end view); TNVC's is the same rounded.
Height from the jaws' feet to the deck's top2.01 in ± 0.005 in 51.1 mmConflictPublished: Arisaka Defense, Unity FAST Micro Mount, a seller, read Nov 3, 2026
Published “DIMENSIONS: 2.08″(L) x 1.30″(W) x 2.01″(H)” used
Arisaka Defense, Unity FAST Micro Mount, a seller, read Nov 3, 2026 the page, harvested Nov 3, 2026
Photo 2.03 in ± 0.01 in
Primary Arms' FST-MICB_03.jpg, 2200 x 1467: the black mount's right side, square on from a hair above, harvested
Scale: mount_length = 2.08 in over the silhouette's 1301 px: 625.5 px/in. Read by rows 99 to 1368 at luminance 200; the top row is a sliver of the deck seen from above, a few hundredths
The maker's figure, drawn on its graphic's end view from the jaws' feet to the mount's top; the side photo reads it 1% over, as a view from a little above does.
arisaka and side-photo differ by 0.02 in beyond what each states it is good to.
The jaws' feet under the rail's top0.339 in ± 0.04 in 8.6 mmConflictWorked out: {.overall_height} - {.deck_above_rail}
Worked out 0.339 in ± 0.04 in used
{.overall_height} - {.deck_above_rail}, harvested
Photo 0.235 in ± 0.03 in
the maker's graphic, its side and end views, harvested
Scale: the maker's 2.01 in (overall_height) in the end view: 48.1 px/in. Read by the base line (the rail's top) to the jaws' feet: 11.25 px in the end view, 11.25 in the side view
What the published overall height leaves under the deck adopted; the graphic's own drawing puts the feet 0.10 in higher, the same disagreement as deck_above_rail's, and kept with it.
derived and graphic differ by 0.104 in beyond what each states it is good to.
The built-in rear sight's aperture above the rail's top1.42 in ± 0.005 in 36.1 mmCorroboratedPublished: Soldier Systems Daily, Unity Tactical announces FAST optics mounts (2019-01-19): the maker's launch text, a review, read Nov 3, 2026
Published “The mount features built-in, standard 1.42” height, windage-adjustable back up rear iron sight” used
Soldier Systems Daily, Unity Tactical announces FAST optics mounts (2019-01-19): the maker's launch text, a review, read Nov 3, 2026 the page, harvested Nov 3, 2026
Photo “1.42" (in both views, from the base line to the rear aperture's middle)”
Unity's Specs & Data graphic: the figure as printed on it, harvested
Scale: none: the maker's printed figure. Read by the dimension beside the end view, from the base line to the middle of the ring in the upper window
The maker's own sentence; its graphic prints the same.
The built-in irons' sight radius (rear aperture to front post)1.27 in ± 0.005 in 32.3 mmConfirmedPublished: Unity Tactical, FAST Micro Mount Installation Instructions (REV B, ©2020), page 3, the maker, read Nov 3, 2026
Published “Elevation adjustment for Front BUIS is 10 MOA per 1/8” turn (keep in mind this is a 1.27” Sight Radius.” used
Unity Tactical, FAST Micro Mount Installation Instructions (REV B, ©2020), page 3, the maker, read Nov 3, 2026 the page, harvested Nov 3, 2026
The rear sight (its windage drum's axis) ahead of the clamp's middle-0.353 in ± 0.01 in -9 mmCorroboratedPhoto: Primary Arms' FST-MICF_03.jpg, 2200 x 1467: the FDE mount's right side, square on
Photo -0.353 in ± 0.01 in used
Primary Arms' FST-MICF_03.jpg, 2200 x 1467: the FDE mount's right side, square on, harvested
Scale: mount_length = 2.08 in over the silhouette's 1292 px (columns 453 to 1744): 621.2 px/in. Read by the drum's dark disc, its centre of mass, from the silhouette's middle (the bolts' middle is 0.001 in from it)
Photo -0.368 in ± 0.015 in
Primary Arms' FST-MICB_03.jpg: the black mount's right side, square on, harvested
Scale: mount_length = 2.08 in over 1301 px: 625.5 px/in. Read by the drum's rim picked on a gridded enlargement (columns 775 to 975 of the original)
A black drum on a tan face, found by its own pixels; the black photo's pick by eye on a black face is within its ±.
The drum turns the aperture across ("Windage adjustment of Rear BUIS ... can be made with Aimpoint adjustment tools or flat blade screwdriver"): the aperture is taken to be on the drum's axis, along the rifle.
The windage drum's axis under the deck's top0.629 in ± 0.012 in 16 mmProvisionalPhoto: Primary Arms' FST-MICF_03.jpg: the FDE mount's right side, square on
Photo 0.629 in ± 0.012 in used
Primary Arms' FST-MICF_03.jpg: the FDE mount's right side, square on, harvested
Scale: 621.2 px/in (mount_length); its height reads 2.022 in for the published 2.01. Read by the drum's dark disc, its centre of mass, 1.393 in over the jaws' feet; scaled by 2.01 / 2.022 to 1.381 in, and 2.01 less that
The windage drum's face, across0.32 in ± 0.02 in 8.1 mmProvisionalPhoto: the black mount's right side, square on
Photo 0.32 in ± 0.02 in used
the black mount's right side, square on, harvested
Scale: 625.5 px/in (mount_length). Read by the drum's knurled rim, columns 775 to 975 on a gridded enlargement: 200 px
The round relief the drum sits in, across0.46 in ± 0.03 in 11.7 mmProvisionalPhoto: the black mount's right side, square on
Photo 0.46 in ± 0.03 in used
the black mount's right side, square on, harvested
Scale: 625.5 px/in (mount_length). Read by the relief's arc over the drum, columns 730 to 1020 on a gridded enlargement, taken as a circle about the drum's axis
How deep the drum's relief and the side pockets are cut0.025 in ± 0.015 in 0.6 mmProvisionalWorked out: An assumption for the drawing, not a reading: no view on file shows a pocket or the drum's relief in section; the obliques show each as a shallow step with its edge lit.
Worked out 0.025 in ± 0.015 in used
An assumption for the drawing, not a reading: no view on file shows a pocket or the drum's relief in section; the obliques show each as a shallow step with its edge lit., harvested
The two cross bolts apart1.584 in ± 0.01 in 40.2 mmConflictPhoto: Primary Arms' FST-MICF_03.jpg: the FDE mount's right side, square on
Photo 1.584 in ± 0.01 in used
Primary Arms' FST-MICF_03.jpg: the FDE mount's right side, square on, harvested
Scale: 621.2 px/in (mount_length). Read by the two bolts' heads' dark discs, their centres of mass: -0.791 and +0.793 in from the silhouette's middle
Photo 1.55 in ± 0.012 in
Rifle Supply's FDE right side, from a little above, harvested
Scale: 830.3 px/in (mount_length). Read by the heads' dark discs' centres of mass, -0.769 and +0.781 in; the left one's disc runs into its counterbore's shadow
Photo 1.566 in ± 0.015 in
the black mount's right side, square on, harvested
Scale: 625.5 px/in (mount_length). Read by the heads' rims picked on a gridded enlargement
The square view with black heads on a tan face; four slots of the rail apart, as the bolts lie in its slots.
fde and fde-above differ by 0.034 in beyond what each states it is good to.
Four of the rail's slots apart (4 x 0.394 = 1.576 in), within the readings' ±.
The cross bolts' axis over the jaws' feet0.255 in ± 0.012 in 6.5 mmProvisionalPhoto: the FDE mount's right side, square on
Photo 0.255 in ± 0.012 in used
the FDE mount's right side, square on, harvested
Scale: 621.2 px/in (mount_length). Read by the two heads' discs' centres of mass, 0.247 and 0.266 in over the jaws' feet (row 1361)
A cross bolt's head, across0.27 in ± 0.02 in 6.9 mmProvisionalPhoto: the black mount's right side, square on
Photo 0.27 in ± 0.02 in used
the black mount's right side, square on, harvested
Scale: 625.5 px/in (mount_length). Read by the head's rim inside its counterbore, on a gridded enlargement (about 170 px)
The counterbore each head sits in, across0.34 in ± 0.02 in 8.6 mmProvisionalPhoto: the FDE mount's right side, square on
Photo 0.34 in ± 0.02 in used
the FDE mount's right side, square on, harvested
Scale: 621.2 px/in (mount_length). Read by the dark disc of each head and its counterbore's shadow, 0.338 and 0.341 in across
The round hole between the bolts (where a QD lever's shaft goes), across0.24 in ± 0.015 in 6.1 mmProvisionalPhoto: the FDE mount's right side, square on
Photo 0.24 in ± 0.015 in used
the FDE mount's right side, square on, harvested
Scale: 621.2 px/in (mount_length). Read by its dark disc, 0.241 in across, centred 0.003 in behind the silhouette's middle and 0.244 in over the jaws' feet
The octagonal recess round that hole, across its flats0.39 in ± 0.02 in 9.9 mmProvisionalPhoto: the black mount's right side, square on
Photo 0.39 in ± 0.02 in used
the black mount's right side, square on, harvested
Scale: 625.5 px/in (mount_length). Read by its two upright flats, columns 975 to 1220 of the original on a gridded enlargement
The two small holes either side of the octagonal recess, apart0.612 in ± 0.01 in 15.5 mmProvisionalPhoto: the FDE mount's right side, square on
Photo 0.612 in ± 0.01 in used
the FDE mount's right side, square on, harvested
Scale: 621.2 px/in (mount_length). Read by their dark discs' centres, -0.298 and +0.314 in from the silhouette's middle, 0.30 in over the jaws' feet
Those small holes' middles over the jaws' feet0.305 in ± 0.012 in 7.7 mmProvisionalPhoto: the FDE mount's right side, square on
Photo 0.305 in ± 0.012 in used
the FDE mount's right side, square on, harvested
Scale: 621.2 px/in (mount_length). Read by their dark discs' centres of mass, 0.309 and 0.300 in over the jaws' feet (row 1361)
Those small holes, across0.108 in ± 0.01 in 2.7 mmProvisionalPhoto: the FDE mount's right side, square on
Photo 0.108 in ± 0.01 in used
the FDE mount's right side, square on, harvested
Scale: 621.2 px/in (mount_length). Read by their dark discs, 0.108 in across each way
The step where the bolts' band stands out of the right face, under the deck's top1.514 in ± 0.015 in 38.5 mmProvisionalPhoto: the black mount's right side, square on
Photo 1.514 in ± 0.015 in used
the black mount's right side, square on, harvested
Scale: 625.5 px/in (mount_length). Read by the lit line across the face, row 1059 on a gridded enlargement: 0.496 in over the jaws' feet, 2.01 less that
The body's width across at the deck0.91 in ± 0.03 in 23.1 mmCorroboratedPhoto: TNVC: the black mount with a T-2 on it, end on
Photo 0.91 in ± 0.03 in used
TNVC: the black mount with a T-2 on it, end on, harvested
Scale: width = 1.30 in across the clamp: 193.3 px on a 3x enlargement (580 px), 148.7 px per in there. Read by the mount's top under the dot's base, columns 390 to 795 on the enlargement: 405 px of 580
Photo 0.92 in ± 0.03 in
the maker's graphic, its end view, harvested
Scale: width = 1.30 in across the clamp, 259 px on a 4x enlargement. Read by the mount's top line, 183 px
A photograph, at three times the graphic's pixels; the two agree.
The body's width across its walls, under the deck's edge0.85 in ± 0.04 in 21.6 mmProvisionalPhoto: TNVC: the black mount with a T-2 on it, end on
Photo 0.85 in ± 0.04 in used
TNVC: the black mount with a T-2 on it, end on, harvested
Scale: width = 1.30 in across the clamp (580 px on a 3x enlargement). Read by the walls' outer faces between the deck and the band, columns about 405 to 780: 375 px
The bolts' band's outer face, out from the middle (the rifle's right)0.654 in ± 0.03 in 16.6 mmProvisionalPhoto: TNVC: the black mount with a T-2 on it, end on
Photo 0.654 in ± 0.03 in used
TNVC: the black mount with a T-2 on it, end on, harvested
Scale: width = 1.30 in across the clamp (580 px on a 3x enlargement). Read by the band's outer face (column 880) from the deck's middle (column 592.5): 287.5 px; the grabber's outer face is 292 px out the other side
The rail-grabber bar's top, under the deck's top1.48 in ± 0.05 in 37.6 mmProvisionalPhoto: TNVC: the black mount with a T-2 on it, end on
Photo 1.48 in ± 0.05 in used
TNVC: the black mount with a T-2 on it, end on, harvested
Scale: overall_height = 2.01 in, 405 px on a 3x enlargement. Read by the bar's top (row 720) under the dot's base (row 425)
The rail-grabber bar's foot, under the deck's top1.97 in ± 0.05 in 50 mmProvisionalPhoto: the maker's graphic, its end view
Photo 1.97 in ± 0.05 in used
the maker's graphic, its end view, harvested
Scale: overall_height = 2.01 in (387 px on a 4x enlargement). Read by the bar's foot (row 745) under the mount's top (row 365)
The rail-grabber bar, along the rail1.9 in ± 0.1 in 48.3 mmProvisionalWorked out: An assumption for the drawing, not a reading: the bar shows only in obliques (the left side, Primary Arms' FST-MICB_02, c717fd0a3974), where it runs nearly the body's length with the two bolts' ends near its own; no square view of the left side is on file.
Worked out 1.9 in ± 0.1 in used
An assumption for the drawing, not a reading: the bar shows only in obliques (the left side, Primary Arms' FST-MICB_02, c717fd0a3974), where it runs nearly the body's length with the two bolts' ends near its own; no square view of the left side is on file., harvested
The sight tunnel (the oval window through the sides, the upper window through each end), its roof under the deck's top0.171 in ± 0.012 in 4.3 mmProvisionalPhoto: the black mount's right side, square on
Photo 0.171 in ± 0.012 in used
the black mount's right side, square on, harvested
Scale: 625.5 px/in (mount_length). Read by the oval window's see-through pixels (luminance over 200), rows 217 to 419: their top 1.839 in over the jaws' feet; 2.01 less that
The sight tunnel's floor under the deck's top0.494 in ± 0.012 in 12.5 mmProvisionalPhoto: the black mount's right side, square on
Photo 0.494 in ± 0.012 in used
the black mount's right side, square on, harvested
Scale: 625.5 px/in (mount_length). Read by the oval window's lowest see-through row, 1.516 in over the jaws' feet
The oval window through the sides, its rear end ahead of the clamp's middle-0.118 in ± 0.01 in -3 mmProvisionalPhoto: the black mount's right side, square on
Photo -0.118 in ± 0.01 in used
the black mount's right side, square on, harvested
Scale: 625.5 px/in (mount_length). Read by the see-through pixels' rear end, column 1026, from the silhouette's middle
The oval window's front end ahead of the clamp's middle0.51 in ± 0.01 in 13 mmProvisionalPhoto: the black mount's right side, square on
Photo 0.51 in ± 0.01 in used
the black mount's right side, square on, harvested
Scale: 625.5 px/in (mount_length). Read by the see-through pixels' front end, column 1418
The sight tunnel's width across (the end faces' upper windows)0.56 in ± 0.04 in 14.2 mmProvisionalPhoto: TNVC: the black mount with a T-2 on it, end on
Photo 0.56 in ± 0.04 in used
TNVC: the black mount with a T-2 on it, end on, harvested
Scale: width = 1.30 in across the clamp (580 px on a 3x enlargement). Read by the upper window's rim, columns 460 to 705: 245 px
The big window through the sides, its rear edge ahead of the clamp's middle-0.499 in ± 0.01 in -12.7 mmProvisionalPhoto: the black mount's right side, square on
Photo -0.499 in ± 0.01 in used
the black mount's right side, square on, harvested
Scale: 625.5 px/in (mount_length). Read by the see-through pixels, columns 788 to 1415
The big window's front edge ahead of the clamp's middle0.505 in ± 0.01 in 12.8 mmProvisionalPhoto: the black mount's right side, square on
Photo 0.505 in ± 0.01 in used
the black mount's right side, square on, harvested
Scale: 625.5 px/in (mount_length). Read by the see-through pixels' front edge, column 1415
The big window's top edge under the deck's top0.651 in ± 0.012 in 16.5 mmProvisionalPhoto: the black mount's right side, square on
Photo 0.651 in ± 0.012 in used
the black mount's right side, square on, harvested
Scale: 625.5 px/in (mount_length). Read by the see-through pixels' top row, 519: 1.359 in over the jaws' feet
The big window's bottom edge under the deck's top1.45 in ± 0.012 in 36.8 mmProvisionalPhoto: the black mount's right side, square on
Photo 1.45 in ± 0.012 in used
the black mount's right side, square on, harvested
Scale: 625.5 px/in (mount_length). Read by the see-through pixels' bottom row, 1019: 0.560 in over the jaws' feet
The big window's sloping upper rear edge, where it meets the top edge, ahead of the clamp's middle-0.033 in ± 0.02 in -0.8 mmProvisionalPhoto: the black mount's right side, square on
Photo -0.033 in ± 0.02 in used
the black mount's right side, square on, harvested
Scale: 625.5 px/in (mount_length). Read by on a gridded enlargement, where the slope's line meets the top edge's
The slope runs from here down to the rear edge at window_chamfer_below_top: 45 degrees within the readings.
The big window's sloping edge, where it meets the rear edge, under the deck's top1.147 in ± 0.02 in 29.1 mmProvisionalPhoto: the black mount's right side, square on
Photo 1.147 in ± 0.02 in used
the black mount's right side, square on, harvested
Scale: 625.5 px/in (mount_length). Read by on a gridded enlargement, where the slope's line meets the rear edge's
The windows' and pockets' corners, their radius0.08 in ± 0.02 in 2 mmProvisionalPhoto: the black mount's right side, square on
Photo 0.08 in ± 0.02 in used
the black mount's right side, square on, harvested
Scale: 625.5 px/in (mount_length). Read by the big window's lower corners, on a gridded enlargement (about 50 px)
The lower window through each end, its top under the deck's top0.77 in ± 0.05 in 19.6 mmProvisionalPhoto: TNVC: the black mount with a T-2 on it, end on
Photo 0.77 in ± 0.05 in used
TNVC: the black mount with a T-2 on it, end on, harvested
Scale: overall_height = 2.01 in, 405 px on a 3x enlargement. Read by the lower window's rim, rows 580 to 700, under the dot's base (row 425)
The lower window through each end, its bottom under the deck's top1.36 in ± 0.05 in 34.5 mmProvisionalPhoto: TNVC: the black mount with a T-2 on it, end on
Photo 1.36 in ± 0.05 in used
TNVC: the black mount with a T-2 on it, end on, harvested
Scale: overall_height = 2.01 in, 405 px on a 3x enlargement. Read by the lower window's rim's bottom, row 700
The lower window through each end, across0.57 in ± 0.04 in 14.5 mmProvisionalPhoto: TNVC: the black mount with a T-2 on it, end on
Photo 0.57 in ± 0.04 in used
TNVC: the black mount with a T-2 on it, end on, harvested
Scale: width = 1.30 in across the clamp (580 px on a 3x enlargement). Read by the lower window's rim, columns 455 to 705
The rear side pocket's rear edge ahead of the clamp's middle-0.896 in ± 0.015 in -22.8 mmProvisionalPhoto: the black mount's right side, square on
Photo -0.896 in ± 0.015 in used
the black mount's right side, square on, harvested
Scale: 625.5 px/in (mount_length). Read by the pocket's lit rim on a gridded enlargement
The rear side pocket's front edge (where it meets the drum's relief) ahead of the clamp's middle-0.456 in ± 0.015 in -11.6 mmProvisionalPhoto: the black mount's right side, square on
Photo -0.456 in ± 0.015 in used
the black mount's right side, square on, harvested
Scale: 625.5 px/in (mount_length). Read by the pocket's lit rim on a gridded enlargement; below the drum it follows the big window's slope, a web's width off it
The front side pocket's rear edge ahead of the clamp's middle0.616 in ± 0.015 in 15.6 mmProvisionalPhoto: the black mount's right side, square on
Photo 0.616 in ± 0.015 in used
the black mount's right side, square on, harvested
Scale: 625.5 px/in (mount_length). Read by the pocket's lit rim on a gridded enlargement
The front side pocket's front edge ahead of the clamp's middle0.896 in ± 0.015 in 22.8 mmProvisionalPhoto: the black mount's right side, square on
Photo 0.896 in ± 0.015 in used
the black mount's right side, square on, harvested
Scale: 625.5 px/in (mount_length). Read by the pocket's lit rim on a gridded enlargement
The side pockets' top edges under the deck's top0.615 in ± 0.015 in 15.6 mmProvisionalPhoto: the black mount's right side, square on
Photo 0.615 in ± 0.015 in used
the black mount's right side, square on, harvested
Scale: 625.5 px/in (mount_length). Read by the two pockets' lit rims (0.619 and 0.611 under the top) on a gridded enlargement
The side pockets' bottom edges under the deck's top1.199 in ± 0.015 in 30.5 mmProvisionalPhoto: the black mount's right side, square on
Photo 1.199 in ± 0.015 in used
the black mount's right side, square on, harvested
Scale: 625.5 px/in (mount_length). Read by the two pockets' lit rims (1.203 and 1.195 under the top) on a gridded enlargement
Each of the two rims along the deck's edges, across (the dot's base stands on them)0.09 in ± 0.03 in 2.3 mmProvisionalPhoto: Primary Arms' FST-MICF_02.jpg: the FDE mount from ahead, its left side and its deck from above, 2200 x 1467
Photo 0.09 in ± 0.03 in used
Primary Arms' FST-MICF_02.jpg: the FDE mount from ahead, its left side and its deck from above, 2200 x 1467, harvested
Scale: the deck's own width, top_width = 0.91 in, across the oblique at the deck's front end. Read by by eye on a crop of the deck: each rim about a tenth of the deck's width; no view on file is square to the deck
How far the channel between the two rims is sunk under the deck's plane0.05 in ± 0.03 in 1.3 mmProvisionalWorked out: An assumption for the drawing, not a reading: the rims' inner walls show in the obliques (132598ee129a, c717fd0a3974) at about half the deck slab's thickness, from above, where a height isn't read.
Worked out 0.05 in ± 0.03 in used
An assumption for the drawing, not a reading: the rims' inner walls show in the obliques (132598ee129a, c717fd0a3974) at about half the deck slab's thickness, from above, where a height isn't read., harvested
The recoil boss in the deck's middle, along the rail0.22 in ± 0.02 in 5.6 mmProvisionalPhoto: Rifle Supply's UTYFST-MICF_1_HR: the FDE mount's right side from a little above, its deck in view
Photo 0.22 in ± 0.02 in used
Rifle Supply's UTYFST-MICF_1_HR: the FDE mount's right side from a little above, its deck in view, harvested
Scale: 830.3 px/in (mount_length). Read by the boss's two ends on a crop of the top, columns 905 and 1090
The recoil boss, across0.3 in ± 0.08 in 7.6 mmProvisionalPhoto: Primary Arms' FST-MICF_02.jpg: the FDE mount from ahead, its left side and its deck from above, 2200 x 1467
Photo 0.3 in ± 0.08 in used
Primary Arms' FST-MICF_02.jpg: the FDE mount from ahead, its left side and its deck from above, 2200 x 1467, harvested
Scale: its own length, lug_length = 0.22 in, beside it in the same plane. Read by by eye on a crop of the deck: about a third longer across than along
Each of the two openings through the channel's floor (either side of the boss), along the rail0.32 in ± 0.08 in 8.1 mmProvisionalPhoto: Primary Arms' FST-MICF_02.jpg: the FDE mount from ahead, its left side and its deck from above, 2200 x 1467
Photo 0.32 in ± 0.08 in used
Primary Arms' FST-MICF_02.jpg: the FDE mount from ahead, its left side and its deck from above, 2200 x 1467, harvested
Scale: the boss's length (lug_length) beside them on the deck. Read by by eye on a crop of the deck: each opening about one and a half times the boss's length, a web as wide as a rim between it and the boss
Those openings, across0.42 in ± 0.08 in 10.7 mmProvisionalPhoto: Primary Arms' FST-MICF_02.jpg: the FDE mount from ahead, its left side and its deck from above, 2200 x 1467
Photo 0.42 in ± 0.08 in used
Primary Arms' FST-MICF_02.jpg: the FDE mount from ahead, its left side and its deck from above, 2200 x 1467, harvested
Scale: the deck's width (top_width) at the same station. Read by by eye on a crop of the deck: each opening a little under half the deck's width, its ends round
The chamfer on the body's machined edges0.011 in ± 0.004 in 0.3 mmProvisionalPhoto: the black mount's right side, square on
Photo 0.011 in ± 0.004 in used
the black mount's right side, square on, harvested
Scale: 625.5 px/in (mount_length). Read by the lit band along the right face's edges and the windows' rims, 6 to 8 px wide on a gridded enlargement
The rear sight's aperture ring, across (seen end on in the sight tunnel)0.2 in ± 0.04 in 5.1 mmProvisionalPhoto: TNVC: the black mount with a T-2 on it, end on
Photo 0.2 in ± 0.04 in used
TNVC: the black mount with a T-2 on it, end on, harvested
Scale: width = 1.30 in across the clamp (580 px on a 3x enlargement). Read by the ring inside the upper window, about 30 px across on the original
The rear sight's peep hole, across0.06 in ± 0.02 in 1.5 mmProvisionalWorked out: An assumption for the drawing, not a reading: the hole is a few pixels in the one end view on file.
Worked out 0.06 in ± 0.02 in used
An assumption for the drawing, not a reading: the hole is a few pixels in the one end view on file., harvested
The rear sight's aperture ring, along the rifle0.12 in ± 0.04 in 3 mmProvisionalWorked out: An assumption for the drawing, not a reading: the ring is inside the body, and no view on file shows it from the side.
Worked out 0.12 in ± 0.04 in used
An assumption for the drawing, not a reading: the ring is inside the body, and no view on file shows it from the side., harvested
The front sight post, across0.06 in ± 0.02 in 1.5 mmProvisionalWorked out: An assumption for the drawing, not a reading: the post shows only in the instruction sheet's drawing (page 3), standing in the front end's upper window, about a third of the hex key's width beside it.
Worked out 0.06 in ± 0.02 in used
An assumption for the drawing, not a reading: the post shows only in the instruction sheet's drawing (page 3), standing in the front end's upper window, about a third of the hex key's width beside it., harvested
The front sight post ahead of the clamp's middle0.917 in ± 0.012 in 23.3 mmCorroboratedWorked out: {.rear_sight_x} + {.sight_radius}
Worked out 0.917 in ± 0.012 in used
{.rear_sight_x} + {.sight_radius}, harvested
What it goes with
By the way it mounts, and the figures each part on file states: a part whose figures say it doesn't fit is left out, and one whose fit can't be checked from what is published is marked. A check is against published figures, not a guarantee.
Picatinny rail (MIL-STD-1913)
- Uppers
- Aero Precision M4E1 Enhanced Upper Receiver Stripped, Aero Precision M4E1 Threaded upper receiver, BCM M4 Upper Receiver Assembly (w/ Laser T-Markings), Expo Arms 7075 Stripped AR-15 Upper Receiver, Geissele Automatics Super Duty Stripped Upper Receiver, Nordic Components 22RB .22 LR upper, 16", Palmetto State Armory AR-15 Stripped Upper Receiver, Panzer Arms AR57 ULT Complete AR-15 Upper Receiver - 5.7x28mm - 12", Panzer Arms AR57 Ultra Light Tactical Complete AR-15 Upper Receiver - 5.7x28mm - 16"
- Handguards
- Aero Precision AR15 10.3" R-ONE M-LOK handguard, Aero Precision AR15 12.7" R-ONE M-LOK handguard, Aero Precision AR15 15" Enhanced M-LOK Handguard, Gen 2, Aero Precision AR15 15" R-ONE M-LOK handguard, Aero Precision AR15 15" S-ONE M-LOK Handguard, Aero Precision AR15 16.6" R-ONE M-LOK handguard, Aero Precision AR15 7.3" R-ONE M-LOK handguard, Aero Precision AR15 9.3" R-ONE M-LOK handguard, BCM MCMR-10 (M-LOK® Compatible* Modular Rail), BCM MCMR-13 (M-LOK® Compatible* Modular Rail), BCM MCMR-15 (M-LOK® Compatible* Modular Rail), Expo Arms Free Float AR-15 Handguard - M-LOK - 15", Geissele Automatics 10.5" Super Modular Rail MK16 M-LOK, Geissele Automatics 13.5" Super Modular Rail MK16 M-LOK, Geissele Automatics 15" Super Modular Rail MK16 M-LOK, MAS Defense 12.62" NERO M-LOK FREE FLOAT, MAS Defense 15" NERO M-LOK FREE FLOAT, MAS Defense 9.87" NERO M-LOK FREE FLOAT, Midwest Industries AR-15/M16 Two Piece Drop-In Handguard, M-LOK® (Carbine), Midwest Industries AR-15/M16 Two Piece Drop-In Handguard, M-LOK® (Mid-Length), Midwest Industries Combat Rail One Piece Free Float Handguard, M-LOK™ (15")
- Frames
- Taurus TX22 Gen 2 frame
- Rail sections
- Magpul M-LOK® Aluminum Rail, 3 Slots, Magpul M-LOK® Aluminum Rail, 5 Slots, Magpul M-LOK® Aluminum Rail, 7 Slots, Magpul M-LOK® Aluminum Rail, 9 Slots, Magpul M-LOK® Polymer Rail, 11 Slots, Magpul M-LOK® Polymer Rail, 3 Slots, Magpul M-LOK® Polymer Rail, 5 Slots, Magpul M-LOK® Polymer Rail, 7 Slots, Magpul M-LOK® Polymer Rail, 9 Slots
Prices on file
Each seller's latest reading of its own page: before tax and shipping, and not a quote. The pages are read again every night.
- Primary Arms $186.00 Black Nov 21, 2026, in stock that day
- Primary Arms $186.00 Flat Dark Earth Nov 21, 2026, in stock that day
- Mile High Shooting Accessories $186.00 Black Nov 21, 2026, in stock that day
- Midwest Gun Works $195.00 Black Nov 21, 2026, in stock that day
- Midwest Gun Works $195.00 Flat Dark Earth Nov 21, 2026, in stock that day
- Rifle Supply $195.99 Flat Dark Earth Nov 21, 2026, out of stock that day