Red dot mount
Reptilia DOT MOUNT FOR AIMPOINT® MICRO – LOWER 1/3 (39MM HEIGHT)
Reptilia's one-piece red dot mount for the Aimpoint Micro footprint: "Machined from billet 7075-T6 aluminum with Milspec Type III hard anodized finish, the DOT Mount attaches to any M1913 Picatinny rail, and offers lower 1/3 co-witness with standard AR15-style back-up sights. Its spring-loaded nitrided steel clamp and mounting bolt simplify the installation process". 51 grams; NSN 1005-01-674-6542. Every photograph on its page has a Micro T-2 on it. On the maker's own photograph of a carbine with it and a T-2, read at the rail's pitch, the deck stands higher than "39MM" as a T-2's axis would put it (deck_above_rail).

- Weight
- 1.8 oz Conflictpublished: Reptilia, DOT MOUNT FOR AIMPOINT® MICRO - LOWER 1/3 (39MM HEIGHT) (product page), the maker, read Nov 3, 2026Its sources span 1.71 oz to 1.82 oz.
- Lowest price
- $85.46 at AR15Discounts, read Nov 21, 2026 (Black)
- Maker's number
- 100-004
- Colours
- Black, Flat Dark Earth Anodized
- Drawn as
- modelled
- Maker's page
- reptiliacorp.com
In “22RB .22 LR rifle”, a build on the start page, in place of its Holosun 1.63 in lower 1/3 co-witness pedestal mount (HS-MOUNT-AR-RISER-ARO).
Its figures
Every figure the site draws and checks it by, with where it came from. Open one for each source's reading, and why one is used where they differ.
Height as the maker names it ("39MM HEIGHT", lower 1/3 co-witness; no dot named: its pictures show a Micro T-2)1.535 in ± 0.02 in 39 mmConfirmedPublished: Reptilia, DOT MOUNT FOR AIMPOINT® MICRO - LOWER 1/3 (39MM HEIGHT) (product page), the maker, read Nov 3, 2026
Published “DOT MOUNT FOR AIMPOINT® MICRO - LOWER 1/3 (39MM HEIGHT)” used
Reptilia, DOT MOUNT FOR AIMPOINT® MICRO - LOWER 1/3 (39MM HEIGHT) (product page), the maker, read Nov 3, 2026 the page, harvested Nov 3, 2026
Published “39mm (1.54") lower 1/3”
RifleConfigurator, Reptilia DOT Mount (a catalog entry; its source unsaid), a review, read Nov 3, 2026 the page, harvested Nov 3, 2026
Published “This model places the center of your optic at a 1.5” height for a lower 1/3rd co-witness with AR-15 iron sights.”
Primary Arms, Reptilia Corp DOT Mount for Aimpoint Micro - Flat Dark Earth - Lower 1/3rd, a seller, read Nov 3, 2026 the page, harvested Nov 3, 2026
The maker's own figure; RifleConfigurator gives it in inches, and Primary Arms' 1.5 in is it rounded to a tenth.
The maker's title is the only figure, with no sentence saying what it is measured to or for which dot; its text: "attaches to any M1913 Picatinny rail, and offers lower 1/3 co-witness with standard AR15-style back-up sights." Every photograph of it on the page has a Micro T-2 on it. Taken as the axis over the rail's top, as Aimpoint names its own 39 mm spacer (aimpoint-micro-t-2.optical_axis_above_rail). Sellers: Primary Arms "This model places the center of your optic at a 1.5” height for a lower 1/3rd co-witness with AR-15 iron sights."; RifleConfigurator "39mm (1.54") lower 1/3".
The deck's lips' top (the outline's top, where a side view sees the dot's base meet the deck) above the rail's top1.096 in ± 0.03 in 27.8 mmProvisionalPhoto: the maker's DOT-MOUNT-08.jpg: a whole carbine square from the left, the FDE lower 1/3 and a T-2 on its receiver, 1000 x 1000
Photo 1.096 in ± 0.03 in used
the maker's DOT-MOUNT-08.jpg: a whole carbine square from the left, the FDE lower 1/3 and a T-2 on its receiver, 1000 x 1000, harvested
Scale: the handguard's top rail: 23 tooth centres along row 446, 192 to 437 px, 11.14 px a slot (the standard's 0.3937 in): 28.29 px/in. Read by the deck's top edge (the T-2's black base over it) at half level over columns 522 to 562, row 415.4 (415.3 to 415.6); the receiver's tooth tops right of the mount, columns 578 to 626, row 446.4 (446.3 to 446.6): 31.0 px. Each edge to half a pixel
The deck has two raised lips along its long edges, and a dot's base stands between them on the floor (lip_height lower). From the side the near lip hides the base's foot: the seam a side view sees is the lip's top.
The lips' height above the deck's floor0.03 in ± 0.02 in 0.8 mmProvisionalWorked out: An assumption for the drawing, not a reading: no view on file is square on to the deck's end. Primary Arms' view of the FDE from the right and above (7e3e918aa753) has each lip's inner wall about a quarter of the deck plate's lettered side face high.
Worked out 0.03 in ± 0.02 in used
An assumption for the drawing, not a reading: no view on file is square on to the deck's end. Primary Arms' view of the FDE from the right and above (7e3e918aa753) has each lip's inner wall about a quarter of the deck plate's lettered side face high., harvested
The deck's floor (where a dot's base sits) above the rail's top1.066 in ± 0.035 in 27.1 mmConflictWorked out: {.lip_top_above_rail} - {.lip_height}
Worked out 0.946 in ± 0.04 in
{.optical_height} - {aimpoint-micro-t-2.axis_above_base}, harvested
39 mm (1.535 in) less the T-2's 0.589 in.
Worked out 1.066 in ± 0.035 in used
{.lip_top_above_rail} - {.lip_height}, harvested
1.096 in less the lips' 0.03 in.
A reading of the deck itself on the maker's own photograph of this mount on a rail, which three views agree with; the derived figure rests on reading a title's "39MM" as a T-2's axis over the rail's top, which none of the maker's photographs bears out. The conflict is kept: the maker's figure is 0.12 in under what its pictures show.
t2 and rifle differ by 0.12 in beyond what each states it is good to.
Worked out two ways, which DISAGREE. From the maker's 39 mm with the T-2's axis over its base (the dot every one of its photographs shows, and the Micro the mount is named for): 0.946 in. And read on the maker's square view of a carbine with this mount and a T-2 on its receiver, at the rail's pitch, from the lips' top less their height: 1.066 in. Two other views say the same as the reading: Rifle Supply's square view of the mount alone, at the reader's base length, has the lips 1.308 in over the base's foot, which would leave the base hanging 0.36 in under the rail's top on the derived figure and 0.21 on the reading (the 1.93's base, on its own rail-scaled view, hangs 0.22); and Rifle Supply's three-quarter view with a T-2 on it has the T-2's axis 0.6 in over the deck by the T-2's own height and the deck over an inch above the rail. A T-2 on the deck as read stands with its axis at 1.655 in (42 mm) by the T-2's ledger, or about 1.60 in (40.6 mm) if a Micro's axis is 0.54 in over its base as the 1.93's photograph and Scalarworks' drawing have it. What the maker's 39 mm is measured to, it doesn't say.
The footprint's middle along the deck, ahead of the clamp's middle0 in ± 0.02 in 0 mmProvisionalPhoto: Rifle Supply 125330.png: the black lower 1/3 alone, square from the left, transparent ground, 1280 x 853
Photo 0 in ± 0.02 in used
Rifle Supply 125330.png: the black lower 1/3 alone, square from the left, transparent ground, 1280 x 853, harvested
Scale: the base's length, mount_length = 2.055 in over its 679.7 px (columns 282 to 961.7): 330.7 px/in. Read by the deck's top (columns 286 to 941 at row 251, middle 613.4) over the base's foot (282.0 to 958.7 at row 655, middle 620.4) and the cross bolt's head (middle about 616): the deck stands over the base's middle to 7 px (0.02 in), and its four screw holes and key lie about its middle in the views from above (7e3e918aa753, 80d4a05aebb1)
The base's length along the rail (at its foot)2.055 in ± 0.0039 in 52.2 mmCorroboratedPublished: Soldier Systems Daily, Reptilia launches DOT Mount for Aimpoint T-1/T-2 (2019-02-12): a reader's comment (Stickman, 2019-02-14) comparing it with Geissele's T1/2 mount: "Reptilia T1/2 mount: Weight- 49 grams (lower 1/3rd witness mount which is larger) Bottom- 52.2mm long Top- 50mm long Width- 31.5mm I Beam at most narrow point 14mm", a review, read Nov 3, 2026
Published “Bottom- 52.2mm long” used
Soldier Systems Daily, Reptilia launches DOT Mount for Aimpoint T-1/T-2 (2019-02-12): a reader's comment (Stickman, 2019-02-14) comparing it with Geissele's T1/2 mount: "Reptilia T1/2 mount: Weight- 49 grams (lower 1/3rd witness mount which is larger) Bottom- 52.2mm long Top- 50mm long Width- 31.5mm I Beam at most narrow point 14mm", a review, read Nov 3, 2026 the page, harvested Nov 3, 2026
Photo 2.03 in ± 0.04 in
the maker's DOT-MOUNT-08.jpg: a whole carbine square from the left, the FDE lower 1/3 and a T-2 on its receiver, 1000 x 1000, harvested
Scale: the handguard's top rail: 23 tooth centres along row 446, 192 to 437 px, 11.14 px a slot (the standard's 0.3937 in): 28.29 px/in. Read by the tan base's two ends at row 445 to 446, just above the receiver's tooth tops (514.0 to 571.3 px at half level; below that row it runs into the tan handguard): 57.4 px
A measurement of the mount in hand, to a tenth of a millimetre; the maker's rail-scaled photograph reads it within its pixel.
The deck's length at its top1.969 in ± 0.02 in 50 mmConflictPublished: Soldier Systems Daily, Reptilia launches DOT Mount for Aimpoint T-1/T-2 (2019-02-12): a reader's comment (Stickman, 2019-02-14) comparing it with Geissele's T1/2 mount: "Reptilia T1/2 mount: Weight- 49 grams (lower 1/3rd witness mount which is larger) Bottom- 52.2mm long Top- 50mm long Width- 31.5mm I Beam at most narrow point 14mm", a review, read Nov 3, 2026
Published “Top- 50mm long” used
Soldier Systems Daily, Reptilia launches DOT Mount for Aimpoint T-1/T-2 (2019-02-12): a reader's comment (Stickman, 2019-02-14) comparing it with Geissele's T1/2 mount: "Reptilia T1/2 mount: Weight- 49 grams (lower 1/3rd witness mount which is larger) Bottom- 52.2mm long Top- 50mm long Width- 31.5mm I Beam at most narrow point 14mm", a review, read Nov 3, 2026 the page, harvested Nov 3, 2026
Photo 1.89 in ± 0.05 in
the maker's DOT-MOUNT-08.jpg: a whole carbine square from the left, the FDE lower 1/3 and a T-2 on its receiver, 1000 x 1000, harvested
Scale: the handguard's top rail: 23 tooth centres along row 446, 192 to 437 px, 11.14 px a slot (the standard's 0.3937 in): 28.29 px/in. Read by the tan deck's ends at rows 416 to 417 (515.2 to 568.7 px at half level): 53.5 px
A measurement of the mount in hand; the square view of the mount alone has the deck at the same share of the base's length as the reader's two figures.
reader and rifle differ by 0.079 in beyond what each states it is good to.
Rifle Supply's square view has the deck's top 0.965 of the base's foot (654.9 of 678.7 px), and so has the 1.93's (605.0 of 626.4): 1.983 in at the reader's base length. The maker's whole-rifle view reads it 1.89, a pixel and a half short at 28 px an inch.
Width across the rifle (the deck and the base)1.24 in ± 0.0039 in 31.5 mmProvisionalPublished: Soldier Systems Daily, Reptilia launches DOT Mount for Aimpoint T-1/T-2 (2019-02-12): a reader's comment (Stickman, 2019-02-14) comparing it with Geissele's T1/2 mount: "Reptilia T1/2 mount: Weight- 49 grams (lower 1/3rd witness mount which is larger) Bottom- 52.2mm long Top- 50mm long Width- 31.5mm I Beam at most narrow point 14mm", a review, read Nov 3, 2026
Published “Width- 31.5mm” used
Soldier Systems Daily, Reptilia launches DOT Mount for Aimpoint T-1/T-2 (2019-02-12): a reader's comment (Stickman, 2019-02-14) comparing it with Geissele's T1/2 mount: "Reptilia T1/2 mount: Weight- 49 grams (lower 1/3rd witness mount which is larger) Bottom- 52.2mm long Top- 50mm long Width- 31.5mm I Beam at most narrow point 14mm", a review, read Nov 3, 2026 the page, harvested Nov 3, 2026
The reader's "Width", taken to be the mount's across the rifle at its widest, the deck plate and the base, which the views from above and the front have about equal.
The I-beam across the rifle at its narrowest (its two flanges, the outside a caliper reaches)0.551 in ± 0.02 in 14 mmProvisionalPublished: Soldier Systems Daily, Reptilia launches DOT Mount for Aimpoint T-1/T-2 (2019-02-12): a reader's comment (Stickman, 2019-02-14) comparing it with Geissele's T1/2 mount: "Reptilia T1/2 mount: Weight- 49 grams (lower 1/3rd witness mount which is larger) Bottom- 52.2mm long Top- 50mm long Width- 31.5mm I Beam at most narrow point 14mm", a review, read Nov 3, 2026
Published “I Beam at most narrow point 14mm” used
Soldier Systems Daily, Reptilia launches DOT Mount for Aimpoint T-1/T-2 (2019-02-12): a reader's comment (Stickman, 2019-02-14) comparing it with Geissele's T1/2 mount: "Reptilia T1/2 mount: Weight- 49 grams (lower 1/3rd witness mount which is larger) Bottom- 52.2mm long Top- 50mm long Width- 31.5mm I Beam at most narrow point 14mm", a review, read Nov 3, 2026 the page, harvested Nov 3, 2026
The reader's "I Beam at most narrow point", taken to be the I-beam's outside across the rifle at its waist, which a caliper reaches at its two flanges: the web between them is set well inside them in the views from the right and front (web_thickness).
The base's foot below the rail's top0.209 in ± 0.035 in 5.3 mmProvisionalPhoto: Rifle Supply 125330.png: the black lower 1/3 alone, square from the left, transparent ground, 1280 x 853
Photo 0.209 in ± 0.035 in used
Rifle Supply 125330.png: the black lower 1/3 alone, square from the left, transparent ground, 1280 x 853, harvested
Scale: the base's length, mount_length = 2.055 in over its 679.7 px: 330.7 px/in. Read by the traced outline's foot 1.305 in under its top (the lips' top), less lip_top_above_rail (1.096 in, the maker's whole-rifle view); the 1.93's base, on its own rail-scaled view, hangs 0.22
The deck plate's side face, from the lips' top down to where its underside turns into the stem0.13 in ± 0.01 in 3.3 mmProvisionalPhoto: Rifle Supply 125330.png: the black lower 1/3 alone, square from the left, transparent ground, 1280 x 853
Photo 0.13 in ± 0.01 in used
Rifle Supply 125330.png: the black lower 1/3 alone, square from the left, transparent ground, 1280 x 853, harvested
Scale: mount_length over the outline's 679.7 px: 330.7 px/in. Read by the lettered band down the deck's side, rows 247.5 to about 290 (42.5 px); the outline's ends turn at 0.131 under its top
The base's square ends, from its foot to where its top turns up into the stem0.37 in ± 0.015 in 9.4 mmProvisionalPhoto: Rifle Supply 125330.png: the black lower 1/3 alone, square from the left, transparent ground, 1280 x 853
Photo 0.37 in ± 0.015 in used
Rifle Supply 125330.png: the black lower 1/3 alone, square from the left, transparent ground, 1280 x 853, harvested
Scale: mount_length over the outline's 679.7 px: 330.7 px/in. Read by the traced outline's ends: the corners at 0.93 (front) and 0.925 to 0.948 (rear) in under its top, its foot at 1.305
Each I-beam flange's thickness along the rail (from the waist's silhouette in to the web's face)0.2 in ± 0.03 in 5.1 mmProvisionalPhoto: Rifle Supply 125330.png: the black lower 1/3 alone, square from the left, transparent ground, 1280 x 853
Photo 0.2 in ± 0.03 in used
Rifle Supply 125330.png: the black lower 1/3 alone, square from the left, transparent ground, 1280 x 853, harvested
Scale: mount_length over the outline's 679.7 px: 330.7 px/in. Read by the waist's silhouette (about 437 px at row 420) to the lit inner edge of the flange where the web's face begins (about 503 px): 66 px; the other side 56 px
The I-beam's web across the rifle, between its two flanges0.1 in ± 0.08 in 2.5 mmProvisionalWorked out: An assumption for the drawing, not a reading: inside what the maker's two weights leave for the web (the note), where the views from the right and front show the web's face well inside the flange's (be5535ecdde1, 932ddb83c5e0).
Worked out 0.1 in ± 0.08 in used
An assumption for the drawing, not a reading: inside what the maker's two weights leave for the web (the note), where the views from the right and front show the web's face well inside the flange's (be5535ecdde1, 932ddb83c5e0)., harvested
No view on file is square on to the mount's end, and no page gives it. The maker's two weights bound it: the 1.93 (55 g) and the lower 1/3 (51 g) differ by 4 g (± 1 g, each to its gram), 0.087 in³ of 7075 (std.density.aluminium_7075), over the 0.33 in their stems' heights differ by (1.133 and 0.805 in between the deck plate and the base, by their outlines and readings): 0.265 ± 0.07 in² of metal in a stem's section at its waist. The two flanges, flange_thickness along the rail by the stem's width across, are 0.22 of that, which leaves the web between them (about 0.62 in long) 0.07 ± 0.11 in thick. Drawn at 0.1.
The cross bolt's axis above the base's foot0.23 in ± 0.01 in 5.8 mmProvisionalPhoto: Rifle Supply 125330.png: the black lower 1/3 alone, square from the left, transparent ground, 1280 x 853
Photo 0.23 in ± 0.01 in used
Rifle Supply 125330.png: the black lower 1/3 alone, square from the left, transparent ground, 1280 x 853, harvested
Scale: mount_length over the outline's 679.7 px: 330.7 px/in. Read by the round seat's middle (616, 603 px) over the foot (679)
The round seat the cross bolt's head lies flush in (on the left face)0.381 in ± 0.012 in 9.7 mmProvisionalPhoto: Rifle Supply 125330.png: the black lower 1/3 alone, square from the left, transparent ground, 1280 x 853
Photo 0.381 in ± 0.012 in used
Rifle Supply 125330.png: the black lower 1/3 alone, square from the left, transparent ground, 1280 x 853, harvested
Scale: mount_length over the outline's 679.7 px: 330.7 px/in. Read by the seat's lit outer rim, about 126 px across at row 603
The cross bolt's head0.3 in ± 0.012 in 7.6 mmProvisionalPhoto: Rifle Supply 125330.png: the black lower 1/3 alone, square from the left, transparent ground, 1280 x 853
Photo 0.3 in ± 0.012 in used
Rifle Supply 125330.png: the black lower 1/3 alone, square from the left, transparent ground, 1280 x 853, harvested
Scale: mount_length over the outline's 679.7 px: 330.7 px/in. Read by the head's dark disc inside the seat, about 100 px across
How far the seat's floor (the head's face) lies inside the base's left face0.02 in ± 0.02 in 0.5 mmProvisionalWorked out: An assumption for the drawing, not a reading: the maker says the clamp and bolt "sit flush with the body of the mount"; the views show a lit rim round the head, which is drawn as a seat this deep.
Worked out 0.02 in ± 0.02 in used
An assumption for the drawing, not a reading: the maker says the clamp and bolt "sit flush with the body of the mount"; the views show a lit rim round the head, which is drawn as a seat this deep., harvested
The slot across the bolt's head0.045 in ± 0.015 in 1.1 mmProvisionalWorked out: An assumption for the drawing, not a reading: the slot shows across the head in every left view, about a seventh of the head's width; no view gives its depth (drawn as deep as it is wide).
Worked out 0.045 in ± 0.015 in used
An assumption for the drawing, not a reading: the slot shows across the head in every left view, about a seventh of the head's width; no view gives its depth (drawn as deep as it is wide)., harvested
The steel clamp's length along the rail (on the right face)0.6 in ± 0.1 in 15.2 mmProvisionalWorked out: An assumption for the drawing, not a reading: no view is square on to the right face. In the views from the right and above (7e3e918aa753, the maker's DOT-MOUNT-03) the clamp's faceted body is about three tenths of the base's length.
Worked out 0.6 in ± 0.1 in used
An assumption for the drawing, not a reading: no view is square on to the right face. In the views from the right and above (7e3e918aa753, the maker's DOT-MOUNT-03) the clamp's faceted body is about three tenths of the base's length., harvested
The steel clamp's top above the base's foot0.33 in ± 0.06 in 8.4 mmProvisionalWorked out: An assumption for the drawing, not a reading: in the views from the right the clamp's body reaches nearly to the base's top edge, a little under base_end_height.
Worked out 0.33 in ± 0.06 in used
An assumption for the drawing, not a reading: in the views from the right the clamp's body reaches nearly to the base's top edge, a little under base_end_height., harvested
How far the steel clamp stands out of the base's right face0.05 in ± 0.03 in 1.3 mmProvisionalWorked out: An assumption for the drawing, not a reading: the maker says it sits "flush with the body"; the views from the right show its faceted face standing a little proud.
Worked out 0.05 in ± 0.03 in used
An assumption for the drawing, not a reading: the maker says it sits "flush with the body"; the views from the right show its faceted face standing a little proud., harvested
The cross bolt's end, where it stands out of the steel clamp0.16 in ± 0.04 in 4.1 mmProvisionalWorked out: An assumption for the drawing, not a reading: a round end in the clamp's middle in the views from the right and from below (019eb4af187a), about half the head's width.
Worked out 0.16 in ± 0.04 in used
An assumption for the drawing, not a reading: a round end in the clamp's middle in the views from the right and from below (019eb4af187a), about half the head's width., harvested
The four through holes in the base's top, either side of the stem0.12 in ± 0.03 in 3 mmProvisionalWorked out: An assumption for the drawing, not a reading: four round holes through the base, two either side of the stem, show in the views from above and come out in the channel's roof (019eb4af187a); about a twentieth of the base's length across.
Worked out 0.12 in ± 0.03 in used
An assumption for the drawing, not a reading: four round holes through the base, two either side of the stem, show in the views from above and come out in the channel's roof (019eb4af187a); about a twentieth of the base's length across., harvested
The base's holes ahead of and behind the clamp's middle0.78 in ± 0.08 in 19.8 mmProvisionalWorked out: An assumption for the drawing, not a reading: near the base's ends, outside the flare into the stem, in the views from above and below (7e3e918aa753, 019eb4af187a).
Worked out 0.78 in ± 0.08 in used
An assumption for the drawing, not a reading: near the base's ends, outside the flare into the stem, in the views from above and below (7e3e918aa753, 019eb4af187a)., harvested
The base's holes out from the middle across the rifle0.4 in ± 0.06 in 10.2 mmProvisionalWorked out: An assumption for the drawing, not a reading: between the flanges and the base's edges in the views from above, and over the rail's head's edges in the view from below (019eb4af187a).
Worked out 0.4 in ± 0.06 in used
An assumption for the drawing, not a reading: between the flanges and the base's edges in the views from above, and over the rail's head's edges in the view from below (019eb4af187a)., harvested
The four holes for the dot's screws through the deck plate0.17 in ± 0.03 in 4.3 mmProvisionalWorked out: An assumption for the drawing, not a reading: four round holes inside the lips in the views from above (80d4a05aebb1, 7e3e918aa753), about a twelfth of the deck's length across.
Worked out 0.17 in ± 0.03 in used
An assumption for the drawing, not a reading: four round holes inside the lips in the views from above (80d4a05aebb1, 7e3e918aa753), about a twelfth of the deck's length across., harvested
The deck's screw holes ahead of and behind the footprint's middle0.62 in ± 0.1 in 15.7 mmProvisionalWorked out: An assumption for the drawing, not a reading: in Primary Arms' three-quarter view from above (7e3e918aa753) the two pairs are about 0.63 of the deck's length apart, a ratio read along an oblique edge.
Worked out 0.62 in ± 0.1 in used
An assumption for the drawing, not a reading: in Primary Arms' three-quarter view from above (7e3e918aa753) the two pairs are about 0.63 of the deck's length apart, a ratio read along an oblique edge., harvested
The deck's screw holes out from the middle across the rifle0.31 in ± 0.06 in 7.9 mmProvisionalWorked out: An assumption for the drawing, not a reading: in the same view the two holes of a pair are about half the deck's width apart.
Worked out 0.31 in ± 0.06 in used
An assumption for the drawing, not a reading: in the same view the two holes of a pair are about half the deck's width apart., harvested
The machined edges' break0.006 in ± 0.004 in 0.2 mmProvisionalWorked out: An assumption for the drawing, not a reading: every edge in the photographs is broken a little; no view resolves by how much.
Worked out 0.006 in ± 0.004 in used
An assumption for the drawing, not a reading: every edge in the photographs is broken a little; no view resolves by how much., harvested
The chamfer along the base's two lower outer edges (the jaws' feet)0.05 in ± 0.02 in 1.3 mmProvisionalWorked out: An assumption for the drawing, not a reading: Rifle Supply's view of the lower 1/3 from below (a copy on file) has a lit strip along the near jaw's lower outer edge, about a fortieth of the base's length across (0.04 to 0.05 in); no view is square on to the base's end. The same base in both heights' side views.
Worked out 0.05 in ± 0.02 in used
An assumption for the drawing, not a reading: Rifle Supply's view of the lower 1/3 from below (a copy on file) has a lit strip along the near jaw's lower outer edge, about a fortieth of the base's length across (0.04 to 0.05 in); no view is square on to the base's end. The same base in both heights' side views., harvested
What it goes with
By the way it mounts, and the figures each part on file states: a part whose figures say it doesn't fit is left out, and one whose fit can't be checked from what is published is marked. A check is against published figures, not a guarantee.
Picatinny rail (MIL-STD-1913)
- Uppers
- Aero Precision M4E1 Enhanced Upper Receiver Stripped, Aero Precision M4E1 Threaded upper receiver, BCM M4 Upper Receiver Assembly (w/ Laser T-Markings), Expo Arms 7075 Stripped AR-15 Upper Receiver, Geissele Automatics Super Duty Stripped Upper Receiver, Nordic Components 22RB .22 LR upper, 16", Palmetto State Armory AR-15 Stripped Upper Receiver, Panzer Arms AR57 ULT Complete AR-15 Upper Receiver - 5.7x28mm - 12", Panzer Arms AR57 Ultra Light Tactical Complete AR-15 Upper Receiver - 5.7x28mm - 16"
- Handguards
- Aero Precision AR15 10.3" R-ONE M-LOK handguard, Aero Precision AR15 12.7" R-ONE M-LOK handguard, Aero Precision AR15 15" Enhanced M-LOK Handguard, Gen 2, Aero Precision AR15 15" R-ONE M-LOK handguard, Aero Precision AR15 15" S-ONE M-LOK Handguard, Aero Precision AR15 16.6" R-ONE M-LOK handguard, Aero Precision AR15 7.3" R-ONE M-LOK handguard, Aero Precision AR15 9.3" R-ONE M-LOK handguard, BCM MCMR-10 (M-LOK® Compatible* Modular Rail), BCM MCMR-13 (M-LOK® Compatible* Modular Rail), BCM MCMR-15 (M-LOK® Compatible* Modular Rail), Expo Arms Free Float AR-15 Handguard - M-LOK - 15", Geissele Automatics 10.5" Super Modular Rail MK16 M-LOK, Geissele Automatics 13.5" Super Modular Rail MK16 M-LOK, Geissele Automatics 15" Super Modular Rail MK16 M-LOK, MAS Defense 12.62" NERO M-LOK FREE FLOAT, MAS Defense 15" NERO M-LOK FREE FLOAT, MAS Defense 9.87" NERO M-LOK FREE FLOAT, Midwest Industries AR-15/M16 Two Piece Drop-In Handguard, M-LOK® (Carbine), Midwest Industries AR-15/M16 Two Piece Drop-In Handguard, M-LOK® (Mid-Length), Midwest Industries Combat Rail One Piece Free Float Handguard, M-LOK™ (15")
- Frames
- Taurus TX22 Gen 2 frame
- Rail sections
- Magpul M-LOK® Aluminum Rail, 3 Slots, Magpul M-LOK® Aluminum Rail, 5 Slots, Magpul M-LOK® Aluminum Rail, 7 Slots, Magpul M-LOK® Aluminum Rail, 9 Slots, Magpul M-LOK® Polymer Rail, 11 Slots, Magpul M-LOK® Polymer Rail, 3 Slots, Magpul M-LOK® Polymer Rail, 5 Slots, Magpul M-LOK® Polymer Rail, 7 Slots, Magpul M-LOK® Polymer Rail, 9 Slots
Prices on file
Each seller's latest reading of its own page: before tax and shipping, and not a quote. The pages are read again every night.
- AR15Discounts $85.46 Black Nov 21, 2026, stock not said
- Rifle Supply $92.99 Flat Dark Earth Anodized Nov 21, 2026, in stock that day
- AR15Discounts $98.96 Flat Dark Earth Anodized Nov 21, 2026, stock not said
- Primary Arms $112.46 Flat Dark Earth Anodized Nov 21, 2026, in stock that day
- MidwayUSA $112.46 Black Nov 21, 2026, in stock that day
- MidwayUSA $112.46 Flat Dark Earth Anodized Nov 21, 2026, in stock that day
- Rifle Supply $89.99 Black Nov 21, 2026, out of stock that day
- Sportsman's Warehouse $94.99 Black Nov 21, 2026, out of stock that day