Red dot mount
Scalarworks LEAP/02 Aimpoint Micro T-2 quick-detach mount, 2.26 in
Scalarworks' quick-detach mount for an Aimpoint Micro T-2 and the dots cut for its footprint, the dot's axis 2.26 in over the rail ("Optic center height over rail 2.26"", "Co-Witness None (A2 BUIS visible through base)"): "LEAP/02 redefines the standard for mounting your Aimpoint Micro T2 footprint optic at 2.26" height." A tall frame of 7075 leaning forward over its clamp, a window through its sides and its ends, clamped by one knurled wheel on the left turned by hand. Black or flat dark earth. 63 g. Out of stock at its maker on 2026-11-03.

- Weight
- 2.22 oz Confirmedpublished: Scalarworks, LEAP/02 (product page, SPECIFICATIONS), the maker, read Nov 3, 2026
- Lowest price
- $179.00 at Scalarworks, read Nov 21, 2026 (Black), out of stock that day
- Maker's number
- SW0230
- Colours
- Black, Flat Dark Earth
- Drawn as
- modelled
- Maker's page
- scalarworks.com
In “22RB .22 LR rifle”, a build on the start page, in place of its Holosun 1.63 in lower 1/3 co-witness pedestal mount (HS-MOUNT-AR-RISER-ARO).
Its figures
Every figure the site draws and checks it by, with where it came from. Open one for each source's reading, and why one is used where they differ.
Optical axis above the rail's top, with an Aimpoint Micro T-2 on it (the maker's height)2.26 in 57.4 mmConfirmedPublished: Scalarworks, LEAP/02 (product page, SPECIFICATIONS), the maker, read Nov 3, 2026
Published “Optic center height over rail 2.26"” used
Scalarworks, LEAP/02 (product page, SPECIFICATIONS), the maker, read Nov 3, 2026 the page, harvested Nov 3, 2026
The page is for the T-2: "LEAP/02 redefines the standard for mounting your Aimpoint Micro T2 footprint optic at 2.26" height."; its markup: "The Scalarworks LEAP/02 is a lightweight modular 2.26 inch height quick-detach mount for Aimpoint Micro T2 compatible red dot sights." Its co-witness, in the same table: "Co-Witness None (A2 BUIS visible through base)"; and "You can also co-witness backup iron sights at 2.26" height with a 6" sight radius." (with the maker's KICK/09 "Diving Boards").
The deck's floor (where the dot's base sits) above the rail's top1.671 in ± 0.037 in 42.4 mmProvisionalWorked out: {.optical_axis_above_rail} - {aimpoint-micro-t-2.axis_above_base}
Worked out 1.671 in ± 0.037 in used
{.optical_axis_above_rail} - {aimpoint-micro-t-2.axis_above_base}, harvested
2.26 in less the T-2's 0.589 in.
The deck is the LEAP/01's: a floor between two rims, the lug standing up in its middle and four screw holes (Primary Arms' photo of this mount from above, 4945353b7bdf). The maker states only the axis's height, for the T-2: the floor is that less the T-2's axis over its base. No drawing of this mount is on file to read the floor on; its side photo has the rims' top (rim_top_above_rail).
The deck's two rims, their tops above the rail's top1.734 in ± 0.025 in 44 mmProvisionalPhoto: Scalarworks, scalarworks-leap-02-quick-detach-Aimpoint-Micro-T2-mount-side-SW0230-1.jpg: SW0230 alone on a rail section, straight left side, 2000 x 2000
Photo 1.734 in ± 0.025 in used
Scalarworks, scalarworks-leap-02-quick-detach-Aimpoint-Micro-T2-mount-side-SW0230-1.jpg: SW0230 alone on a rail section, straight left side, 2000 x 2000, harvested
Scale: the rail section's own slots: the gaps of the two that show have their middles at columns 532.5 and 1475.0 (the gaps' edges on rows 1125 to 1160), six pitches apart (std.picatinny.slot_pitch): 157.08 px a pitch, 398.7 px/in at the rail's middle; the teeth's tops on row 1118 (the white ground shows through the slots down to their floors, 46 px lower: the photo is level). Read by the mount's top edge (row 426.5, from column 518 to 1228) above the teeth's tops: 691.5 px
Not drawn above the deck's floor (the part's approximations). On the LEAP/01's drawings the rims stand 0.078 to 0.081 in over the floor: here 1.734 less that is 1.65 to 1.66 in for the floor, which the photo's 1.3% (the near face reads large, as the LEAP/01's photos do) takes to 1.63; the floor the T-2's figure gives is 1.671 ± 0.037.
The footprint's middle along the deck, ahead of the wheel's shaft0.328 in ± 0.05 in 8.3 mmProvisionalPhoto: Scalarworks, scalarworks-leap-02-quick-detach-Aimpoint-Micro-T2-mount-side-SW0230-1.jpg: SW0230 alone on a rail section, straight left side, 2000 x 2000
Photo 0.328 in ± 0.05 in used
Scalarworks, scalarworks-leap-02-quick-detach-Aimpoint-Micro-T2-mount-side-SW0230-1.jpg: SW0230 alone on a rail section, straight left side, 2000 x 2000, harvested
Scale: the rail section's own slots: the gaps of the two that show have their middles at columns 532.5 and 1475.0 (the gaps' edges on rows 1125 to 1160), six pitches apart (std.picatinny.slot_pitch): 157.08 px a pitch, 398.7 px/in at the rail's middle; the teeth's tops on row 1118 (the white ground shows through the slots down to their floors, 46 px lower: the photo is level). Read by the middle of the rims' flat top, between the notch at its front tip (column 518) and its rear end over the rear post (1228): column 873, 130.75 px ahead of the wheel's shaft (column 1003.75, the slot midway). The lug in the middle of the deck: Primary Arms' photo from above (4945353b7bdf)
The clamp's length along the rail, at its foot1.771 in ± 0.02 in 45 mmProvisionalPhoto: Scalarworks, scalarworks-leap-02-quick-detach-Aimpoint-Micro-T2-mount-side-SW0230-1.jpg: SW0230 alone on a rail section, straight left side, 2000 x 2000
Photo 1.771 in ± 0.02 in used
Scalarworks, scalarworks-leap-02-quick-detach-Aimpoint-Micro-T2-mount-side-SW0230-1.jpg: SW0230 alone on a rail section, straight left side, 2000 x 2000, harvested
Scale: the rail section's own slots: the gaps of the two that show have their middles at columns 532.5 and 1475.0 (the gaps' edges on rows 1125 to 1160), six pitches apart (std.picatinny.slot_pitch): 157.08 px a pitch, 398.7 px/in at the rail's middle; the teeth's tops on row 1118 (the white ground shows through the slots down to their floors, 46 px lower: the photo is level). Read by the traced outline's foot (profiles.side), from 0.887 in ahead of the shaft to 0.884 in behind it
As read: the near face reads about 1.3% large on the LEAP/01's photos of the same set-up.
The clamp's foot, its front end ahead of the wheel's shaft0.887 in ± 0.015 in 22.5 mmProvisionalPhoto: Scalarworks, scalarworks-leap-02-quick-detach-Aimpoint-Micro-T2-mount-side-SW0230-1.jpg: SW0230 alone on a rail section, straight left side, 2000 x 2000
Photo 0.887 in ± 0.015 in used
Scalarworks, scalarworks-leap-02-quick-detach-Aimpoint-Micro-T2-mount-side-SW0230-1.jpg: SW0230 alone on a rail section, straight left side, 2000 x 2000, harvested
Scale: the rail section's own slots: the gaps of the two that show have their middles at columns 532.5 and 1475.0 (the gaps' edges on rows 1125 to 1160), six pitches apart (std.picatinny.slot_pitch): 157.08 px a pitch, 398.7 px/in at the rail's middle; the teeth's tops on row 1118 (the white ground shows through the slots down to their floors, 46 px lower: the photo is level). Read by the traced outline's foot (profiles.side): its front end, 0.887 in ahead of the shaft (column 650)
The clamp's foot, its rear end behind the wheel's shaft0.884 in ± 0.015 in 22.5 mmProvisionalPhoto: Scalarworks, scalarworks-leap-02-quick-detach-Aimpoint-Micro-T2-mount-side-SW0230-1.jpg: SW0230 alone on a rail section, straight left side, 2000 x 2000
Photo 0.884 in ± 0.015 in used
Scalarworks, scalarworks-leap-02-quick-detach-Aimpoint-Micro-T2-mount-side-SW0230-1.jpg: SW0230 alone on a rail section, straight left side, 2000 x 2000, harvested
Scale: the rail section's own slots: the gaps of the two that show have their middles at columns 532.5 and 1475.0 (the gaps' edges on rows 1125 to 1160), six pitches apart (std.picatinny.slot_pitch): 157.08 px a pitch, 398.7 px/in at the rail's middle; the teeth's tops on row 1118 (the white ground shows through the slots down to their floors, 46 px lower: the photo is level). Read by the rear face of the clamp's block at its foot, column 1356.25: 352.5 px behind the shaft (the outline's own corner is at 0.886 in)
Overall length along the rail2.209 in ± 0.03 in 56.1 mmProvisionalPhoto: Scalarworks, scalarworks-leap-02-quick-detach-Aimpoint-Micro-T2-mount-side-SW0230-1.jpg: SW0230 alone on a rail section, straight left side, 2000 x 2000
Photo 2.209 in ± 0.03 in used
Scalarworks, scalarworks-leap-02-quick-detach-Aimpoint-Micro-T2-mount-side-SW0230-1.jpg: SW0230 alone on a rail section, straight left side, 2000 x 2000, harvested
Scale: the rail section's own slots: the gaps of the two that show have their middles at columns 532.5 and 1475.0 (the gaps' edges on rows 1125 to 1160), six pitches apart (std.picatinny.slot_pitch): 157.08 px a pitch, 398.7 px/in at the rail's middle; the teeth's tops on row 1118 (the white ground shows through the slots down to their floors, 46 px lower: the photo is level). Read by the traced outline (profiles.side): the deck's front tip 1.325 in ahead of the shaft, the clamp's rear face 0.884 in behind it (column 1356.25)
No page gives it.
Overall width across the clamp1.334 in ± 0.006 in 33.9 mmProvisionalWorked out: {scalarworks-leap-01-micro-193.width}
Worked out 1.334 in ± 0.006 in used
{scalarworks-leap-01-micro-193.width}, harvested
The LEAP/01 1.93 in's drawing from behind: the only view across a mount of this family on file.
The LEAP/02's page: "the Leap mount is symmetrical, protruding less than 7mm from either side of your Picatinny rail." No view across this mount is on file: read on the LEAP/01's drawing, the same ClickDrive clamp.
The body under the deck, across (its two side walls' outer faces)0.94 in ± 0.006 in 23.9 mmProvisionalWorked out: {scalarworks-leap-01-micro-193.body_width}
Worked out 0.94 in ± 0.006 in used
{scalarworks-leap-01-micro-193.body_width}, harvested
The LEAP/01's, as width: the deck carries the same footprint and its walls stand under its rims in Primary Arms' photo from above.
How far the LEAP/01 1.93 in's section is lengthened up its walls for this mount's0.33 in ± 0.04 in 8.4 mmProvisionalWorked out: {.deck_above_rail} - {scalarworks-leap-01-micro-193.deck_above_rail}
Worked out 0.33 in ± 0.04 in used
{.deck_above_rail} - {scalarworks-leap-01-micro-193.deck_above_rail}, harvested
The section across is the LEAP/01's (profiles.end, from that mount's drawing); this mount's deck stands higher. The model raises everything of that section over the middle of its straight walls by this much, the window through the ends with it (the LEAP/02's runs the frame's height: "A2 BUIS visible through base", and Primary Arms' photo from the front).
The clamp's foot below the rail's top0.236 in ± 0.008 in 6 mmProvisionalPhoto: Scalarworks, scalarworks-leap-02-quick-detach-Aimpoint-Micro-T2-mount-side-SW0230-1.jpg: SW0230 alone on a rail section, straight left side, 2000 x 2000
Photo 0.236 in ± 0.008 in used
Scalarworks, scalarworks-leap-02-quick-detach-Aimpoint-Micro-T2-mount-side-SW0230-1.jpg: SW0230 alone on a rail section, straight left side, 2000 x 2000, harvested
Scale: the rail section's own slots: the gaps of the two that show have their middles at columns 532.5 and 1475.0 (the gaps' edges on rows 1125 to 1160), six pitches apart (std.picatinny.slot_pitch): 157.08 px a pitch, 398.7 px/in at the rail's middle; the teeth's tops on row 1118 (the white ground shows through the slots down to their floors, 46 px lower: the photo is level). Read by the clamp's foot (row 1212, its dark edge under the wheel's sides) under the teeth's tops (1118): 94 px
ClickDrive wheel, over its teeth0.627 in ± 0.015 in 15.9 mmProvisionalPhoto: Scalarworks, scalarworks-leap-02-quick-detach-Aimpoint-Micro-T2-mount-side-SW0230-1.jpg: SW0230 alone on a rail section, straight left side, 2000 x 2000
Photo 0.627 in ± 0.015 in used
Scalarworks, scalarworks-leap-02-quick-detach-Aimpoint-Micro-T2-mount-side-SW0230-1.jpg: SW0230 alone on a rail section, straight left side, 2000 x 2000, harvested
Scale: the rail section's own slots: the gaps of the two that show have their middles at columns 532.5 and 1475.0 (the gaps' edges on rows 1125 to 1160), six pitches apart (std.picatinny.slot_pitch): 157.08 px a pitch, 398.7 px/in at the rail's middle; the teeth's tops on row 1118 (the white ground shows through the slots down to their floors, 46 px lower: the photo is level). Read by the bottom teeth's tips (row 1255.8) under the wheel's socket's middle (column 1004.2, row 1130.8): 125 px, twice
ClickDrive wheel, at the foot of its teeth0.577 in ± 0.03 in 14.7 mmProvisionalPhoto: Scalarworks, scalarworks-leap-02-quick-detach-Aimpoint-Micro-T2-mount-side-SW0230-1.jpg: SW0230 alone on a rail section, straight left side, 2000 x 2000
Photo 0.577 in ± 0.03 in used
Scalarworks, scalarworks-leap-02-quick-detach-Aimpoint-Micro-T2-mount-side-SW0230-1.jpg: SW0230 alone on a rail section, straight left side, 2000 x 2000, harvested
Scale: the rail section's own slots: the gaps of the two that show have their middles at columns 532.5 and 1475.0 (the gaps' edges on rows 1125 to 1160), six pitches apart (std.picatinny.slot_pitch): 157.08 px a pitch, 398.7 px/in at the rail's middle; the teeth's tops on row 1118 (the white ground shows through the slots down to their floors, 46 px lower: the photo is level). Read by the valleys between the bottom teeth (row 1246), 115 px under the centre, twice
ClickDrive wheel, the face inside its rim0.54 in ± 0.02 in 13.7 mmProvisionalPhoto: Scalarworks, scalarworks-leap-02-quick-detach-Aimpoint-Micro-T2-mount-side-SW0230-1.jpg: SW0230 alone on a rail section, straight left side, 2000 x 2000
Photo 0.54 in ± 0.02 in used
Scalarworks, scalarworks-leap-02-quick-detach-Aimpoint-Micro-T2-mount-side-SW0230-1.jpg: SW0230 alone on a rail section, straight left side, 2000 x 2000, harvested
Scale: the rail section's own slots: the gaps of the two that show have their middles at columns 532.5 and 1475.0 (the gaps' edges on rows 1125 to 1160), six pitches apart (std.picatinny.slot_pitch): 157.08 px a pitch, 398.7 px/in at the rail's middle; the teeth's tops on row 1118 (the white ground shows through the slots down to their floors, 46 px lower: the photo is level). Read by the bright ring round the face, columns 896.5 to 1112
ClickDrive wheel, the socket in its middle0.122 in ± 0.015 in 3.1 mmProvisionalPhoto: Scalarworks, scalarworks-leap-02-quick-detach-Aimpoint-Micro-T2-mount-side-SW0230-1.jpg: SW0230 alone on a rail section, straight left side, 2000 x 2000
Photo 0.122 in ± 0.015 in used
Scalarworks, scalarworks-leap-02-quick-detach-Aimpoint-Micro-T2-mount-side-SW0230-1.jpg: SW0230 alone on a rail section, straight left side, 2000 x 2000, harvested
Scale: the rail section's own slots: the gaps of the two that show have their middles at columns 532.5 and 1475.0 (the gaps' edges on rows 1125 to 1160), six pitches apart (std.picatinny.slot_pitch): 157.08 px a pitch, 398.7 px/in at the rail's middle; the teeth's tops on row 1118 (the white ground shows through the slots down to their floors, 46 px lower: the photo is level). Read by the dark hole at the wheel's middle, columns 980 to 1028.5
ClickDrive wheel's axis above the rail's top-0.032 in ± 0.01 in -0.8 mmProvisionalPhoto: Scalarworks, scalarworks-leap-02-quick-detach-Aimpoint-Micro-T2-mount-side-SW0230-1.jpg: SW0230 alone on a rail section, straight left side, 2000 x 2000
Photo -0.032 in ± 0.01 in used
Scalarworks, scalarworks-leap-02-quick-detach-Aimpoint-Micro-T2-mount-side-SW0230-1.jpg: SW0230 alone on a rail section, straight left side, 2000 x 2000, harvested
Scale: the rail section's own slots: the gaps of the two that show have their middles at columns 532.5 and 1475.0 (the gaps' edges on rows 1125 to 1160), six pitches apart (std.picatinny.slot_pitch): 157.08 px a pitch, 398.7 px/in at the rail's middle; the teeth's tops on row 1118 (the white ground shows through the slots down to their floors, 46 px lower: the photo is level). Read by the wheel's socket's middle (row 1130.8) under the teeth's tops (1118): 12.8 px
Lower than the LEAP/01's (0.002 to -0.008 in their photos): read as it is.
ClickDrive wheel, its outer face left of the mount's middle0.663 in ± 0.006 in 16.8 mmProvisionalWorked out: {scalarworks-leap-01-micro-193.wheel_outer_z}
Worked out 0.663 in ± 0.006 in used
{scalarworks-leap-01-micro-193.wheel_outer_z}, harvested
No view across this mount on file: the LEAP/01's drawing, the same ClickDrive clamp and wheel.
ClickDrive wheel, across0.167 in ± 0.008 in 4.2 mmProvisionalWorked out: {scalarworks-leap-01-micro-193.wheel_thickness}
Worked out 0.167 in ± 0.008 in used
{scalarworks-leap-01-micro-193.wheel_thickness}, harvested
The LEAP/01's drawing, as wheel_outer_z.
The set screw in the rear end (the ball detent's), left of the middle0.579 in ± 0.008 in 14.7 mmProvisionalWorked out: {scalarworks-leap-01-micro-193.set_screw_z}
Worked out 0.579 in ± 0.008 in used
{scalarworks-leap-01-micro-193.set_screw_z}, harvested
The LEAP/01's drawing: no view of this mount's rear end on file.
"An integrated spring-loaded ball-detent exerts enough force against the crown to make it completely recoil proof." (the LEAP/01's page; this one: "ClickDrive's low-profile thumbscrew and low-friction telescoping clamp ..."); the screw's hole shows low in the rear block in the side photo.
The set screw's hole in the rear end0.106 in ± 0.01 in 2.7 mmProvisionalWorked out: {scalarworks-leap-01-micro-193.set_screw_d}
Worked out 0.106 in ± 0.01 in used
{scalarworks-leap-01-micro-193.set_screw_d}, harvested
The LEAP/01's drawing, as set_screw_z.
The telescoping jaw: where it is split from the right wall, right of the middle0.51 in ± 0.012 in 13 mmProvisionalWorked out: {scalarworks-leap-01-micro-193.jaw_inner_z}
Worked out 0.51 in ± 0.012 in used
{scalarworks-leap-01-micro-193.jaw_inner_z}, harvested
The LEAP/01's drawing: the same clamp (Primary Arms' photo of this mount's right side shows the jaw's split low along it, with the shaft's end and the two guide pins' in a row).
The telescoping jaw, its top above the rail's top0.195 in ± 0.006 in 5 mmProvisionalWorked out: {scalarworks-leap-01-micro-193.jaw_top}
Worked out 0.195 in ± 0.006 in used
{scalarworks-leap-01-micro-193.jaw_top}, harvested
The LEAP/01's drawing, as jaw_inner_z.
The telescoping jaw, where it turns in under the rail's head (its top there, below the rail's top)-0.056 in ± 0.01 in -1.4 mmProvisionalWorked out: {scalarworks-leap-01-micro-193.hook_top}
Worked out -0.056 in ± 0.01 in used
{scalarworks-leap-01-micro-193.hook_top}, harvested
The LEAP/01's drawing, as jaw_inner_z.
The stepped recess round the side window: each step's width0.027 in ± 0.005 in 0.7 mmProvisionalPhoto: Scalarworks, scalarworks-leap-02-quick-detach-Aimpoint-Micro-T2-mount-side-SW0230-1.jpg: SW0230 alone on a rail section, straight left side, 2000 x 2000
Photo 0.027 in ± 0.005 in used
Scalarworks, scalarworks-leap-02-quick-detach-Aimpoint-Micro-T2-mount-side-SW0230-1.jpg: SW0230 alone on a rail section, straight left side, 2000 x 2000, harvested
Scale: the rail section's own slots: the gaps of the two that show have their middles at columns 532.5 and 1475.0 (the gaps' edges on rows 1125 to 1160), six pitches apart (std.picatinny.slot_pitch): 157.08 px a pitch, 398.7 px/in at the rail's middle; the teeth's tops on row 1118 (the white ground shows through the slots down to their floors, 46 px lower: the photo is level). Read by the steps' lit edges down the window's front side, on row 620: columns 870, 882 and 893, the window's edge at 905 (11.5 px a step); across its top, on column 960: rows 515, 525 and 533, the edge at 540 (9 px a step): 10.4 px
Three steps round the window in each side face, counted on the side photo (each step's edge catches the light) and in Primary Arms' photo of the right side (4945353b7bdf).
The stepped recess round the side window: each step's depth0.02 in ± 0.01 in 0.5 mmProvisionalWorked out: An assumption for the drawing, not a reading: no view on file looks along a step; Primary Arms' oblique (4945353b7bdf) shows them about as deep as they are wide.
Worked out 0.02 in ± 0.01 in used
An assumption for the drawing, not a reading: no view on file looks along a step; Primary Arms' oblique (4945353b7bdf) shows them about as deep as they are wide., harvested
The guide pins' heads on the jaw's outer face, ahead of and behind the shaft's0.53 in ± 0.05 in 13.5 mmProvisionalPhoto: Primary Arms, SW0230_01.jpg: SW0230 alone from the right front and above, 2200 x 1467
Photo 0.53 in ± 0.05 in used
Primary Arms, SW0230_01.jpg: SW0230 alone from the right front and above, 2200 x 1467, harvested
Scale: the jaw's own length along its lower edge (columns 517 to 1276: 819 px along the edge's line), clamp_front plus clamp_rear: a proportion in an oblique, the heads on the same face as the edge. Read by the heads' middles at (603, 1083), (830, 1175) and (1055, 1268): 245 and 243 px apart along the edge's line
Three round heads in a row along the right jaw, evenly spaced, the largest in the middle where the shaft ends: "A pair of hardened steel precision ground pins is press fitted to the clamp and act as guides." (the LEAP/01's page; the maker's render of the ClickDrive clamp draws the two pins across the jaw either side of the shaft, 7519a621ec0e).
A guide pin's head0.1 in ± 0.02 in 2.5 mmProvisionalPhoto: Primary Arms, SW0230_01.jpg: SW0230 alone from the right front and above, 2200 x 1467
Photo 0.1 in ± 0.02 in used
Primary Arms, SW0230_01.jpg: SW0230 alone from the right front and above, 2200 x 1467, harvested
Scale: the jaw's own length along its lower edge (columns 517 to 1276: 819 px along the edge's line), clamp_front plus clamp_rear: a proportion in an oblique, the heads on the same face as the edge. Read by the front head across the edge's line, columns 580 to 626: 46 px
The shaft's end on the jaw's outer face0.15 in ± 0.02 in 3.8 mmProvisionalPhoto: Primary Arms, SW0230_01.jpg: SW0230 alone from the right front and above, 2200 x 1467
Photo 0.15 in ± 0.02 in used
Primary Arms, SW0230_01.jpg: SW0230 alone from the right front and above, 2200 x 1467, harvested
Scale: the jaw's own length along its lower edge (columns 517 to 1276: 819 px along the edge's line), clamp_front plus clamp_rear: a proportion in an oblique, the heads on the same face as the edge. Read by the middle head across the edge's line, columns 795 to 865: 70 px
The dark ring round each head in the jaw's face0.008 in ± 0.005 in 0.2 mmProvisionalPhoto: Primary Arms, SW0230_01.jpg: SW0230 alone from the right front and above, 2200 x 1467
Photo 0.008 in ± 0.005 in used
Primary Arms, SW0230_01.jpg: SW0230 alone from the right front and above, 2200 x 1467, harvested
Scale: the jaw's own length along its lower edge (columns 517 to 1276: 819 px along the edge's line), clamp_front plus clamp_rear: a proportion in an oblique, the heads on the same face as the edge. Read by the dark ring round the middle head, about 4 px wide
How deep each head's hole is drawn0.04 in ± 0.02 in 1 mmProvisionalWorked out: An assumption for the drawing, not a reading: the heads are flush with the face in the photo, and what is behind them doesn't show.
Worked out 0.04 in ± 0.02 in used
An assumption for the drawing, not a reading: the heads are flush with the face in the photo, and what is behind them doesn't show., harvested
Clearance round the wheel in its pocket in the left wall0.02 in ± 0.01 in 0.5 mmProvisionalWorked out: An assumption for the drawing, not a reading: the side photo shows the pocket's rim round the wheel's teeth as a dark ring a few pixels wide.
Worked out 0.02 in ± 0.01 in used
An assumption for the drawing, not a reading: the side photo shows the pocket's rim round the wheel's teeth as a dark ring a few pixels wide., harvested
How far the wheel's face is dished inside its rim0.01 in ± 0.01 in 0.3 mmProvisionalWorked out: An assumption for the drawing, not a reading: no view on file has the wheel in profile.
Worked out 0.01 in ± 0.01 in used
An assumption for the drawing, not a reading: no view on file has the wheel in profile., harvested
The socket in the wheel's middle, its depth0.08 in ± 0.04 in 2 mmProvisionalWorked out: An assumption for the drawing, not a reading: the socket shows dark in the side photo, its depth not.
Worked out 0.08 in ± 0.04 in used
An assumption for the drawing, not a reading: the socket shows dark in the side photo, its depth not., harvested
The set screw's hole in the rear end, its depth0.1 in ± 0.05 in 2.5 mmProvisionalWorked out: An assumption for the drawing, not a reading: no view on file looks into it.
Worked out 0.1 in ± 0.05 in used
An assumption for the drawing, not a reading: no view on file looks into it., harvested
How far the set screw's end stands back in its hole0.02 in ± 0.02 in 0.5 mmProvisionalWorked out: An assumption for the drawing, not a reading.
Worked out 0.02 in ± 0.02 in used
An assumption for the drawing, not a reading., harvested
The aluminium's edges, broken0.008 in ± 0.005 in 0.2 mmProvisionalWorked out: An assumption for the drawing, not a reading: the photos show every edge of the body softened, by an amount no view on file resolves.
Worked out 0.008 in ± 0.005 in used
An assumption for the drawing, not a reading: the photos show every edge of the body softened, by an amount no view on file resolves., harvested
What it goes with
By the way it mounts, and the figures each part on file states: a part whose figures say it doesn't fit is left out, and one whose fit can't be checked from what is published is marked. A check is against published figures, not a guarantee.
Picatinny rail (MIL-STD-1913)
- Uppers
- Aero Precision M4E1 Enhanced Upper Receiver Stripped, Aero Precision M4E1 Threaded upper receiver, BCM M4 Upper Receiver Assembly (w/ Laser T-Markings), Expo Arms 7075 Stripped AR-15 Upper Receiver, Geissele Automatics Super Duty Stripped Upper Receiver, Nordic Components 22RB .22 LR upper, 16", Palmetto State Armory AR-15 Stripped Upper Receiver, Panzer Arms AR57 ULT Complete AR-15 Upper Receiver - 5.7x28mm - 12", Panzer Arms AR57 Ultra Light Tactical Complete AR-15 Upper Receiver - 5.7x28mm - 16"
- Handguards
- Aero Precision AR15 10.3" R-ONE M-LOK handguard, Aero Precision AR15 12.7" R-ONE M-LOK handguard, Aero Precision AR15 15" Enhanced M-LOK Handguard, Gen 2, Aero Precision AR15 15" R-ONE M-LOK handguard, Aero Precision AR15 15" S-ONE M-LOK Handguard, Aero Precision AR15 16.6" R-ONE M-LOK handguard, Aero Precision AR15 7.3" R-ONE M-LOK handguard, Aero Precision AR15 9.3" R-ONE M-LOK handguard, BCM MCMR-10 (M-LOK® Compatible* Modular Rail), BCM MCMR-13 (M-LOK® Compatible* Modular Rail), BCM MCMR-15 (M-LOK® Compatible* Modular Rail), Expo Arms Free Float AR-15 Handguard - M-LOK - 15", Geissele Automatics 10.5" Super Modular Rail MK16 M-LOK, Geissele Automatics 13.5" Super Modular Rail MK16 M-LOK, Geissele Automatics 15" Super Modular Rail MK16 M-LOK, MAS Defense 12.62" NERO M-LOK FREE FLOAT, MAS Defense 15" NERO M-LOK FREE FLOAT, MAS Defense 9.87" NERO M-LOK FREE FLOAT, Midwest Industries AR-15/M16 Two Piece Drop-In Handguard, M-LOK® (Carbine), Midwest Industries AR-15/M16 Two Piece Drop-In Handguard, M-LOK® (Mid-Length), Midwest Industries Combat Rail One Piece Free Float Handguard, M-LOK™ (15")
- Frames
- Taurus TX22 Gen 2 frame
- Rail sections
- Magpul M-LOK® Aluminum Rail, 3 Slots, Magpul M-LOK® Aluminum Rail, 5 Slots, Magpul M-LOK® Aluminum Rail, 7 Slots, Magpul M-LOK® Aluminum Rail, 9 Slots, Magpul M-LOK® Polymer Rail, 11 Slots, Magpul M-LOK® Polymer Rail, 3 Slots, Magpul M-LOK® Polymer Rail, 5 Slots, Magpul M-LOK® Polymer Rail, 7 Slots, Magpul M-LOK® Polymer Rail, 9 Slots
Prices on file
Each seller's latest reading of its own page: before tax and shipping, and not a quote. The pages are read again every night.
- Scalarworks $179.00 Black Nov 21, 2026, out of stock that day
- Scalarworks $189.00 Flat Dark Earth Nov 21, 2026, out of stock that day