Red dot mount
Midwest Industries MK2 QD T2 Aimpoint Mount, NV 2.26 in Height
A quick-detach mount for Aimpoint Micro footprint red dots at the maker's night vision height (its option "2.26\" Height", number MI-MK2-QDT2NV-2.26; Primary Arms the same). The maker: "Available in Low, Lower 1/3 Cowitness, Absolute Cowitness, and NV 2.26” height", "Patented QD lever by Elite Defense", "Hard Coat Anodized 6061 Aluminum for a lifetime of service". Primary Arms: "This is the NV 2.26-inch height, which raises the optic for a heads-up posture and for use with night vision, well above a standard iron sight cowitness." The 2.26 in is taken as the axis of a T-2, the dot the mount is named for: the maker names none.

- Weight
- 2.55 oz ± 0.5 oz Provisionalworked out: The model's volume: the aluminium 1.5705 cubic inches as the maker's 6061 (std.density.aluminium, 0.098 lb a cubic inch) and the steel 0.02 (the lock button, the nut's screw, the shaft in its slot) as steel (std.density.steel), from pipeline/blender/midwest_mk2_qd_t2.py's manifest. The ± is a fifth: the widths across it are the 1/3's assumptions.
- Lowest price
- $139.95 at Primary Arms, read Nov 21, 2026 (Black)
- Maker's number
- MI-MK2-QDT2NV-2.26
- Colour
- Black (placeholder)
- Drawn as
- modelled
- Maker's page
- midwestindustriesinc.com
In “22RB .22 LR rifle”, a build on the start page, in place of its Holosun 1.63 in lower 1/3 co-witness pedestal mount (HS-MOUNT-AR-RISER-ARO).
Its figures
Every figure the site draws and checks it by, with where it came from. Open one for each source's reading, and why one is used where they differ.
The dot's axis over the rail's top at this height (the maker's "NV 2.26” height": a T-2 taken as the dot)2.26 in ± 0.005 in 57.4 mmConfirmedPublished: Midwest Industries, MK2 QD T2 Aimpoint Mount (MK2QDT2AIMPO): its option list and its feature list, the maker, read Nov 3, 2026
Published “Available in Low, Lower 1/3 Cowitness, Absolute Cowitness, and NV 2.26” height” used
Midwest Industries, MK2 QD T2 Aimpoint Mount (MK2QDT2AIMPO): its option list and its feature list, the maker, read Nov 3, 2026 the page, harvested Nov 3, 2026
The maker names the option and gives no dot: "Available in Low, Lower 1/3 Cowitness, Absolute Cowitness, and NV 2.26” height". Primary Arms: "This is the NV 2.26-inch height, which raises the optic for a heads-up posture and for use with night vision, well above a standard iron sight cowitness." Taken as the axis over the rail of a T-2, the dot the mount is named for ("MK2 QD T2 Aimpoint Mount"; Primary Arms' table: "Compatible Model Aimpoint Micro T-1, Aimpoint Micro T-2"): an assumption, said so. A lead, not this part's source: Police1 of the maker's older non-QD night vision mount (SHOT Show 2020, the oval-hole mount whose own name at the maker is NV 2.33"): "the Midwest Industries night vision tall mount position an Aimpoint T1 style optic at 2.26″ above the top rail".
The deck's top (where the dot's base sits) above the rail's top1.671 in ± 0.04 in 42.4 mmProvisionalWorked out: {.optical_height} - {aimpoint-micro-t-2.axis_above_base}
Worked out 1.671 in ± 0.04 in used
{.optical_height} - {aimpoint-micro-t-2.axis_above_base}, harvested
2.26 in less the T-2's 0.589 in over its base, if the maker's figure is a T-2's axis (optical_height).
Photo 1.63 in ± 0.09 in
Midwest Industries' MI-MK2-QDT2-NV, also its picture for the 2.26" option: this mount from the front right and above, the lever closed, 1280 x 1280) against a copy on file (its MK2-QDT213-ra: the 1/3 height in the same pose, harvested
Scale: the QD lever, the same part in both pictures: its tail 142 and 143 px high in the two (columns 300 to 390) for its height in the 1/3's right view (profiles.lever there, 0.234 to -0.263 in at the tail: 288 px/in, as the two pictures are drawn to one scale and one pose). Read by between the deck's lower edge and the lever's top, columns 450 to 510: 346 px here against the 1/3's 194, the deck 79 px higher and the lever 64 px lower in the frame: 152 px more, 0.53 in, over the 1/3's deck height (midwest-mk2-qd-t2-lower-13.deck_above_rail, 1.10). The ± is the 1/3's 0.06 and how a quarter view's vertical scale is taken (the lever's top face seen from above is in its 143 px)
The maker's own figure for this height, less the T-2's axis over its base; its picture against the 1/3's in the same pose agrees within 0.04 in, inside both readings.
The web between the deck and the base: its length along the rail (straight-sided at this height)0.95 in ± 0.08 in 24.1 mmProvisionalPhoto: Midwest Industries' MI-MK2-QDT2-NV, also its picture for the 2.26" option: this mount from the front right and above, the lever closed, 1280 x 1280) against a copy on file (its MK2-QDT213-ra: the 1/3 height in the same pose
Photo 0.95 in ± 0.08 in used
Midwest Industries' MI-MK2-QDT2-NV, also its picture for the 2.26" option: this mount from the front right and above, the lever closed, 1280 x 1280) against a copy on file (its MK2-QDT213-ra: the 1/3 height in the same pose, harvested
Scale: the 1/3's web at its narrowest (midwest-mk2-qd-t2-lower-13 profiles.side: 0.786 in), seen in the same pose, and the view's scale along the rail from the lever's tail (288 px/in up it; turned about 30 degrees from square, about 257 px/in along it). Read by the web's silhouette rows 480 to 680: x 551 to 823, 272 px, against the 1/3's narrowest, rows 580 to 600: x 582 to 806, 224 px: 48 px longer
At this height the web is a straight-sided slab with an oval panel on its flank, not the 1/3's waisted one (both quarter views).
The oval panel on each flank of the web: its length along the rail (its groove's middle)0.45 in ± 0.06 in 11.4 mmProvisionalPhoto: Midwest Industries' MI-MK2-QDT2-NV, also its picture for the 2.26" option: this mount from the front right and above, the lever closed, 1280 x 1280) against a copy on file (its MK2-QDT213-ra: the 1/3 height in the same pose
Photo 0.45 in ± 0.06 in used
Midwest Industries' MI-MK2-QDT2-NV, also its picture for the 2.26" option: this mount from the front right and above, the lever closed, 1280 x 1280) against a copy on file (its MK2-QDT213-ra: the 1/3 height in the same pose, harvested
Scale: the view's scale along the rail as web_length has it (about 257 px/in). Read by the oval groove round the panel with the maker's mark on the web's right flank: x 590 to 705 at its middle height, 115 px
The oval panel on each flank of the web: its height (its groove's middle)0.9 in ± 0.06 in 22.9 mmProvisionalPhoto: Midwest Industries' MI-MK2-QDT2-NV, also its picture for the 2.26" option: this mount from the front right and above, the lever closed, 1280 x 1280) against a copy on file (its MK2-QDT213-ra: the 1/3 height in the same pose
Photo 0.9 in ± 0.06 in used
Midwest Industries' MI-MK2-QDT2-NV, also its picture for the 2.26" option: this mount from the front right and above, the lever closed, 1280 x 1280) against a copy on file (its MK2-QDT213-ra: the 1/3 height in the same pose, harvested
Scale: the lever's tail as deck_above_rail's photo reading has it (288 px/in up the view). Read by the groove's top and bottom ends at rows 505 and 765, 260 px
The oval panel's groove: its width0.03 in ± 0.01 in 0.8 mmProvisionalPhoto: Midwest Industries' MI-MK2-QDT2-NV, also its picture for the 2.26" option: this mount from the front right and above, the lever closed, 1280 x 1280) against a copy on file (its MK2-QDT213-ra: the 1/3 height in the same pose
Photo 0.03 in ± 0.01 in used
Midwest Industries' MI-MK2-QDT2-NV, also its picture for the 2.26" option: this mount from the front right and above, the lever closed, 1280 x 1280) against a copy on file (its MK2-QDT213-ra: the 1/3 height in the same pose, harvested
Scale: as web_oval_height. Read by the dark line round the panel, about 8 px across
The rounds where the web meets the deck and the base0.08 in ± 0.04 in 2 mmProvisionalWorked out: An assumption for the drawing, not a reading: the web's front and rear faces run straight from a small round under the deck to a small round over the base in the one quarter view; their size isn't read.
Worked out 0.08 in ± 0.04 in used
An assumption for the drawing, not a reading: the web's front and rear faces run straight from a small round under the deck to a small round over the base in the one quarter view; their size isn't read., harvested
The footprint's middle along the deck, ahead of the clamp's middle-0.01 in ± 0.015 in -0.3 mmProvisionalWorked out: {midwest-mk2-qd-t2-lower-13.deck_x}
Worked out -0.01 in ± 0.015 in used
{midwest-mk2-qd-t2-lower-13.deck_x}, harvested
The 1/3 height's reading, the only straight view of the deck over the base.
No straight side view of this height is on file: the deck over the base is the 1/3 height's, whose two straight side views are the only ones of any MK2 QD (one deck and one base in the maker's pictures of every height), said in the part's approximations.
Clamp length along the rail (at its foot)1.405 in ± 0.025 in 35.7 mmCorroboratedWorked out: {midwest-mk2-qd-t2-lower-13.mount_length}
Worked out 1.405 in ± 0.025 in used
{midwest-mk2-qd-t2-lower-13.mount_length}, harvested
The 1/3 height's reading, the only straight view of the base.
No straight side view of this height is on file: its clamp base is the 1/3 height's, whose two straight side views are the only ones of any MK2 QD (one base in the maker's pictures of every height), said in the part's approximations.
What it goes with
By the way it mounts, and the figures each part on file states: a part whose figures say it doesn't fit is left out, and one whose fit can't be checked from what is published is marked. A check is against published figures, not a guarantee.
Picatinny rail (MIL-STD-1913)
- Uppers
- Aero Precision M4E1 Enhanced Upper Receiver Stripped, Aero Precision M4E1 Threaded upper receiver, BCM M4 Upper Receiver Assembly (w/ Laser T-Markings), Expo Arms 7075 Stripped AR-15 Upper Receiver, Geissele Automatics Super Duty Stripped Upper Receiver, Nordic Components 22RB .22 LR upper, 16", Palmetto State Armory AR-15 Stripped Upper Receiver, Panzer Arms AR57 ULT Complete AR-15 Upper Receiver - 5.7x28mm - 12", Panzer Arms AR57 Ultra Light Tactical Complete AR-15 Upper Receiver - 5.7x28mm - 16"
- Handguards
- Aero Precision AR15 10.3" R-ONE M-LOK handguard, Aero Precision AR15 12.7" R-ONE M-LOK handguard, Aero Precision AR15 15" Enhanced M-LOK Handguard, Gen 2, Aero Precision AR15 15" R-ONE M-LOK handguard, Aero Precision AR15 15" S-ONE M-LOK Handguard, Aero Precision AR15 16.6" R-ONE M-LOK handguard, Aero Precision AR15 7.3" R-ONE M-LOK handguard, Aero Precision AR15 9.3" R-ONE M-LOK handguard, BCM MCMR-10 (M-LOK® Compatible* Modular Rail), BCM MCMR-13 (M-LOK® Compatible* Modular Rail), BCM MCMR-15 (M-LOK® Compatible* Modular Rail), Expo Arms Free Float AR-15 Handguard - M-LOK - 15", Geissele Automatics 10.5" Super Modular Rail MK16 M-LOK, Geissele Automatics 13.5" Super Modular Rail MK16 M-LOK, Geissele Automatics 15" Super Modular Rail MK16 M-LOK, MAS Defense 12.62" NERO M-LOK FREE FLOAT, MAS Defense 15" NERO M-LOK FREE FLOAT, MAS Defense 9.87" NERO M-LOK FREE FLOAT, Midwest Industries AR-15/M16 Two Piece Drop-In Handguard, M-LOK® (Carbine), Midwest Industries AR-15/M16 Two Piece Drop-In Handguard, M-LOK® (Mid-Length), Midwest Industries Combat Rail One Piece Free Float Handguard, M-LOK™ (15")
- Frames
- Taurus TX22 Gen 2 frame
- Rail sections
- Magpul M-LOK® Aluminum Rail, 3 Slots, Magpul M-LOK® Aluminum Rail, 5 Slots, Magpul M-LOK® Aluminum Rail, 7 Slots, Magpul M-LOK® Aluminum Rail, 9 Slots, Magpul M-LOK® Polymer Rail, 11 Slots, Magpul M-LOK® Polymer Rail, 3 Slots, Magpul M-LOK® Polymer Rail, 5 Slots, Magpul M-LOK® Polymer Rail, 7 Slots, Magpul M-LOK® Polymer Rail, 9 Slots
Prices on file
Each seller's latest reading of its own page: before tax and shipping, and not a quote. The pages are read again every night.
- Primary Arms $139.95 Black Nov 21, 2026, in stock that day