Lower receiver
Geissele Automatics Super Duty AR-15 Lower Receiver - Stripped Lower
Geissele's forged stripped lower, marked GEISSELE AUTOMATICS with the Super Duty keystone, SD-556 and CAL 5.56MM on the well's left wall: "a mil-spec foundation ready to be the heart of your next AR-15 build", "Precision machined from 7075-T6 aluminum to mil-spec dimensions", "Type III hardcoat anodized finish", ".250-inch takedown holes and Safe/Fire indicators" (Primary Arms, 05-2994-B; Geissele's own site refuses the reader). No trigger guard: a separate one pins into its ears; its well's mouth is a square lip, not a flare; its bolt catch's bosses are the standard's.

- Weight
- 8.38 oz ± 0.84 oz Provisionalworked out: This part's own model's metal: the closed volume of app/public/models/geissele-super-duty-stripped-lower.glb as its script built it (5.1372 cubic inches: the traced outline at the Army drawing's widths, its pocket, well, bore and holes cut, the rib and the pads on; the manifest's volume_in3) times what a cubic inch of 7075 weighs (std.density.aluminium_7075, 1.632 oz): 5.1372 x 1.632 = 8.384 oz. Primary Arms: 'Precision machined from 7075-T6 aluminum'.
- Lowest price
- $175.00 at Primary Arms, read Nov 21, 2026 (Black)
- Maker's number
- 05-2994-B
- Colours
- Black, Desert Dirt
- Drawn as
- modelled
- Maker's page
- primaryarms.com
In “Two-tone 16 in, Stealth Gray and soft-shooting”, a build on the start page, as it is.
Its figures
Every figure the site draws and checks it by, with where it came from. Open one for each source's reading, and why one is used where they differ.
Receiver maximum width (Z)0.88 in ± 0.008 in 22.4 mmConfirmedWorked out: {std.ar15.lower_body_width}
Worked out 0.88 in ± 0.008 in used
{std.ar15.lower_body_width}, harvested
The body's width is the Army drawing's (8448608): Primary Arms, of this lower: 'Precision machined from 7075-T6 aluminum to mil-spec dimensions', 'Compatible with mil-spec AR-15 components', 'any mil-spec lower parts kit and components drop right in without modification'. No page states a width and no photo on file looks along the receiver.
The body's is the drawing's; the well's walls (std.ar15.magwell_outside_width) and the tower's ring (std.ar15.buffer_tower_od) stand wider and are drawn at the drawing's too; the roll along the top of the well's right wall is the widest thing on the receiver (well_roll_crest_out).
Receiver extension (bore) axis above the takedown pin centre0.877 in ± 0.0015 in 22.3 mmConfirmedWorked out: {std.ar15.bore_axis_y}
Worked out 0.8775 in ± 0.0015 in used
{std.ar15.bore_axis_y}, harvested
A mil-spec lower by its seller's sentence: the threaded hole's centre is the drawing's. The rectified right photo's ring tops out at 1.575, the drawing's 1.5735 (tower_top_above_pin).
Magazine seat, X (a seated magazine's frame origin ahead of the takedown pin)3.491 in ± 0.03 in 88.7 mmProvisionalWorked out: {bad-workhorse-lower.magazine_seat_x}
Worked out 3.4915 in ± 0.03 in used
{bad-workhorse-lower.magazine_seat_x}, from the site owner
Where a magazine seats in a mil-spec well: from the Army drawing's well and catch slot and the user's own magazine, recorded on the Workhorse. Primary Arms, of this lower: 'Precision machined from 7075-T6 aluminum to mil-spec dimensions', 'Compatible with mil-spec AR-15 components', 'any mil-spec lower parts kit and components drop right in without modification'; the rectified right photo has the catch's hole and the button's pocket where the drawing puts them (the pocket 0.50 tall about Y -0.56, the drawing's .515 about -0.565). No photo of a magazine seated in it is on file.
Magazine seat, Y (the feed-lip top of a seated magazine)1.003 in ± 0.05 in 25.5 mmProvisionalWorked out: {bad-workhorse-lower.magazine_seat_y}
Worked out 1.003 in ± 0.05 in used
{bad-workhorse-lower.magazine_seat_y}, from the site owner
As magazine_seat_x: the standard well's and the catch's, not this receiver's outside.
Receiver underside behind the step (where a grip's flat top bears), Y-1.065 in ± 0.03 in -27.1 mmProvisionalPhoto: right side: Primary Arms' photo ddfadb3e24e2 (05-2994-B_05) laid square onto the right face by the drawing's holes, the far wall's share taken off
Photo -1.065 in ± 0.03 in used
right side: Primary Arms' photo ddfadb3e24e2 (05-2994-B_05) laid square onto the right face by the drawing's holes, the far wall's share taken off, harvested
Scale: frame from the reviewed holes takedown, pivot (200.0 px/in, rms 0.000 in over 2 points). Read by y_min in x [-0.25, -0.1] of the traced outline (tools/trace.py)
The outline's flat just behind the lug's step: the right face's reading of where a grip's flat top bears (the seat itself is the drawing's: grip_seat_y).
The outline's flat just behind the lug's rear face: the right side's reading of where a grip's flat top bears. The seat itself is the drawing's (grip_seat_y).
Grip seat, Y (the underside a grip's flat top bears on, at the takedown pin's X)-1.069 in ± 0.011 in -27.2 mmConfirmedWorked out: {std.ar15.deck_y} - {std.ar15.grip_seat_below_deck}
Worked out -1.0695 in ± 0.0115 in used
{std.ar15.deck_y} - {std.ar15.grip_seat_below_deck}, harvested
A mil-spec lower: the flat the lug hangs from is the drawing's, 1.318 ±.010 below the deck.
Photo -1.065 in ± 0.03 in
right side: Primary Arms' photo ddfadb3e24e2, 05-2994-B_05, laid square onto the right face at 200 px/in by a homography fitted to the near rims of the Army drawing's six holes on it, each within 0.0034 in after the fit, harvested
Scale: the rectification's frame: takedown pin (319.5, 399.5), pivot (1594.5, 399.5) px, 200 px/in. Read by y_min of the traced outline in x [-0.25, -0.1]: the flat just behind the lug's step
The drawing dimensions it, and the rectified right photo has the flat behind the lug 0.005 above it.
Grip shelf start (the step behind the grip: the lug's rear face), X-0.06 in ± 0.008 in -1.5 mmProvisionalPhoto: right side: Primary Arms' photo ddfadb3e24e2 (05-2994-B_05) laid square onto the right face by the drawing's holes, the far wall's share taken off
Photo -0.06 in ± 0.008 in used
right side: Primary Arms' photo ddfadb3e24e2 (05-2994-B_05) laid square onto the right face by the drawing's holes, the far wall's share taken off, harvested
Scale: frame from the reviewed holes takedown, pivot (200.0 px/in, rms 0.000 in over 2 points). Read by x_min in x [-0.2, 0.6] in y [-1.3, -1.1] of the traced outline (tools/trace.py)
The step behind the grip (a near-upright edge between Y -1.05 and -1.32).
The lug's rear face as the outline has it; the drawing's is -0.075 (std.ar15.receiver_rear_x + grip_lug_front_from_rear_face - grip_lug_length), which the model uses.
Receiver underside above the trigger opening, Y-1.09 in ± 0.008 in -27.7 mmProvisionalPhoto: right side: Primary Arms' photo ddfadb3e24e2 (05-2994-B_05) laid square onto the right face by the drawing's holes, the far wall's share taken off
Photo -1.09 in ± 0.008 in used
right side: Primary Arms' photo ddfadb3e24e2 (05-2994-B_05) laid square onto the right face by the drawing's holes, the far wall's share taken off, harvested
Scale: frame from the reviewed holes takedown, pivot (200.0 px/in, rms 0.000 in over 2 points). Read by y_min in x [1.95, 2.85] of the traced outline (tools/trace.py)
The body's lower edge above the trigger guard's opening.
The rectified right photo's outline: 0.02 below the grip seat's plane (-1.0695), within its ±; the model draws one plane there, as the drawing has one surface.
Trigger guard front ear hole, X3.342 in ± 0.007 in 84.9 mmConfirmedWorked out: {std.ar15.trigger_guard_front_x}
Worked out 3.3425 in ± 0.007 in used
{std.ar15.trigger_guard_front_x}, harvested
A mil-spec lower (Primary Arms, of this lower: 'Precision machined from 7075-T6 aluminum to mil-spec dimensions', 'Compatible with mil-spec AR-15 components', 'any mil-spec lower parts kit and components drop right in without modification'): the hole is the drawing's. Its hole goes into the right ear only, from its spotface; the rectified right photo shows the spotface's round at the ear where the drawing has it (not fitted: its rim is in shadow).
Trigger guard front ear hole, Y-2.18 in ± 0.01 in -55.4 mmConfirmedWorked out: {std.ar15.trigger_guard_rear_y}
Worked out -2.18 in ± 0.01 in used
{std.ar15.trigger_guard_rear_y}, harvested
A mil-spec lower (Primary Arms, of this lower: 'Precision machined from 7075-T6 aluminum to mil-spec dimensions', 'Compatible with mil-spec AR-15 components', 'any mil-spec lower parts kit and components drop right in without modification'): the hole is the drawing's. Its hole goes into the right ear only, from its spotface; the rectified right photo shows the spotface's round at the ear where the drawing has it (not fitted: its rim is in shadow).
Trigger guard rear ear hole, X1.498 in ± 0.01 in 38.1 mmConfirmedWorked out: {std.ar15.trigger_guard_rear_x}
Worked out 1.4985 in ± 0.01 in used
{std.ar15.trigger_guard_rear_x}, harvested
A mil-spec lower (Primary Arms, of this lower: 'Precision machined from 7075-T6 aluminum to mil-spec dimensions', 'Compatible with mil-spec AR-15 components', 'any mil-spec lower parts kit and components drop right in without modification'): the hole is the drawing's. Not an independent check: it is one of the six holes the rectifications were fitted to (on the right within 0.0034 in, on the left within 0.031 after the fit), which says the photos hold the drawing's pattern of holes, not where any one is.
Trigger guard rear ear hole, Y-2.18 in ± 0.01 in -55.4 mmConfirmedWorked out: {std.ar15.trigger_guard_rear_y}
Worked out -2.18 in ± 0.01 in used
{std.ar15.trigger_guard_rear_y}, harvested
A mil-spec lower (Primary Arms, of this lower: 'Precision machined from 7075-T6 aluminum to mil-spec dimensions', 'Compatible with mil-spec AR-15 components', 'any mil-spec lower parts kit and components drop right in without modification'): the hole is the drawing's. Not an independent check: it is one of the six holes the rectifications were fitted to (on the right within 0.0034 in, on the left within 0.031 after the fit), which says the photos hold the drawing's pattern of holes, not where any one is.
Trigger pin hole centre, X1.928 in ± 0.004 in 49 mmConfirmedWorked out: {std.ar15.trigger_pin_x}
Worked out 1.928 in ± 0.004 in used
{std.ar15.trigger_pin_x}, harvested
A mil-spec lower (Primary Arms, of this lower: 'Precision machined from 7075-T6 aluminum to mil-spec dimensions', 'Compatible with mil-spec AR-15 components', 'any mil-spec lower parts kit and components drop right in without modification'): the hole is the drawing's. Not an independent check: it is one of the six holes the rectifications were fitted to (on the right within 0.0034 in, on the left within 0.031 after the fit), which says the photos hold the drawing's pattern of holes, not where any one is.
Trigger pin hole centre, Y-0.689 in ± 0.0035 in -17.5 mmConfirmedWorked out: {std.ar15.trigger_pin_y}
Worked out -0.689 in ± 0.0035 in used
{std.ar15.trigger_pin_y}, harvested
A mil-spec lower (Primary Arms, of this lower: 'Precision machined from 7075-T6 aluminum to mil-spec dimensions', 'Compatible with mil-spec AR-15 components', 'any mil-spec lower parts kit and components drop right in without modification'): the hole is the drawing's. Not an independent check: it is one of the six holes the rectifications were fitted to (on the right within 0.0034 in, on the left within 0.031 after the fit), which says the photos hold the drawing's pattern of holes, not where any one is.
Hammer pin hole centre, X2.771 in ± 0.004 in 70.4 mmConfirmedWorked out: {std.ar15.hammer_pin_x}
Worked out 2.771 in ± 0.004 in used
{std.ar15.hammer_pin_x}, harvested
A mil-spec lower (Primary Arms, of this lower: 'Precision machined from 7075-T6 aluminum to mil-spec dimensions', 'Compatible with mil-spec AR-15 components', 'any mil-spec lower parts kit and components drop right in without modification'): the hole is the drawing's. Not an independent check: it is one of the six holes the rectifications were fitted to (on the right within 0.0034 in, on the left within 0.031 after the fit), which says the photos hold the drawing's pattern of holes, not where any one is.
Hammer pin hole centre, Y-0.375 in ± 0.002 in -9.5 mmConfirmedWorked out: {std.ar15.hammer_pin_y}
Worked out -0.375 in ± 0.002 in used
{std.ar15.hammer_pin_y}, harvested
A mil-spec lower (Primary Arms, of this lower: 'Precision machined from 7075-T6 aluminum to mil-spec dimensions', 'Compatible with mil-spec AR-15 components', 'any mil-spec lower parts kit and components drop right in without modification'): the hole is the drawing's. Not an independent check: it is one of the six holes the rectifications were fitted to (on the right within 0.0034 in, on the left within 0.031 after the fit), which says the photos hold the drawing's pattern of holes, not where any one is.
Safety selector hole centre, X0.803 in ± 0.004 in 20.4 mmConfirmedWorked out: {std.ar15.selector_x}
Worked out 0.803 in ± 0.004 in used
{std.ar15.selector_x}, harvested
A mil-spec lower (Primary Arms, of this lower: 'Precision machined from 7075-T6 aluminum to mil-spec dimensions', 'Compatible with mil-spec AR-15 components', 'any mil-spec lower parts kit and components drop right in without modification'): the hole is the drawing's. Not an independent check: it is one of the six holes the rectifications were fitted to (on the right within 0.0034 in, on the left within 0.031 after the fit), which says the photos hold the drawing's pattern of holes, not where any one is.
Safety selector hole centre, Y-0.466 in ± 0.015 in -11.8 mmCorroboratedWorked out: {std.ar15.selector_y}
Worked out -0.466 in ± 0.015 in used
{std.ar15.selector_y}, harvested
A mil-spec lower (Primary Arms, of this lower: 'Precision machined from 7075-T6 aluminum to mil-spec dimensions', 'Compatible with mil-spec AR-15 components', 'any mil-spec lower parts kit and components drop right in without modification'): the hole is the drawing's. Not an independent check: it is one of the six holes the rectifications were fitted to (on the right within 0.0034 in, on the left within 0.031 after the fit), which says the photos hold the drawing's pattern of holes, not where any one is.
Hammer and trigger pin holes, diameter0.157 in ± 0.00075 in 4 mmConfirmedWorked out: {std.ar15.fcg_pin_hole_d}
Worked out 0.15675 in ± 0.00075 in used
{std.ar15.fcg_pin_hole_d}, harvested
A mil-spec lower: the drawing's holes for the .154 pins (fcg_pin_d, the page's).
Hammer and trigger pins it takes, diameter0.154 in ± 0.0005 in 3.9 mmProvisionalPublished: Primary Arms, Geissele Automatics Super Duty AR-15 Lower Receiver - Stripped Lower (05-2994-B), Specifications, a seller, read Oct 28, 2026
Published “Trigger Pin Diameter MIL-SPEC .154” used
Primary Arms, Geissele Automatics Super Duty AR-15 Lower Receiver - Stripped Lower (05-2994-B), Specifications, a seller, read Oct 28, 2026 the page, harvested Oct 28, 2026
The pins' size (small-pin), which the fcg interface's pin_diameter states; the holes are the drawing's (fcg_pin_hole_d).
Takedown and pivot pin holes, diameter0.251 in ± 0.001 in 6.4 mmConfirmedWorked out: {std.ar15.takedown_hole_d}
Worked out 0.251 in ± 0.001 in used
{std.ar15.takedown_hole_d}, harvested
The Army drawing's hole.
Published “.250" takedown holes”
Primary Arms, Geissele Automatics Super Duty AR-15 Lower Receiver - Stripped Lower (05-2994-B), Features, a seller, read Oct 28, 2026 the page, harvested Oct 28, 2026
Primary Arms: '.250" takedown holes', and 'The .250-inch takedown holes and Safe/Fire indicators match standard AR-15 conventions'. A nominal size, the pins'.
The page's .250 is the nominal size of the standard's pins ("match standard AR-15 conventions"); the drawing's hole is .251. Drawn at the drawing's.
Rear face (the buffer tower's, where the end plate bears) behind the takedown pin1.125 in ± 0.005 in 28.6 mmConfirmedWorked out: -{std.ar15.receiver_rear_x}
Worked out 1.125 in ± 0.005 in used
-{std.ar15.receiver_rear_x}, harvested
A mil-spec lower: the rear face is the drawing's (7.503 -.006 behind the pivot pin). The rectified right photo's silhouette there is the ring's near side (rear_face_x, 0.015 behind it).
Receiver rear silhouette below the tower ring, X-1.14 in ± 0.008 in -29 mmProvisionalPhoto: right side: Primary Arms' photo ddfadb3e24e2 (05-2994-B_05) laid square onto the right face by the drawing's holes, the far wall's share taken off
Photo -1.14 in ± 0.008 in used
right side: Primary Arms' photo ddfadb3e24e2 (05-2994-B_05) laid square onto the right face by the drawing's holes, the far wall's share taken off, harvested
Scale: frame from the reviewed holes takedown, pivot (200.0 px/in, rms 0.000 in over 2 points). Read by x_min in y [-0.9, 0.0] of the traced outline (tools/trace.py)
Rear face of the receiver below the tower's ring: the drawing's is -1.125 (std.ar15.receiver_rear_x).
The silhouette's rear edge under the ring: the ring's near side, laid on the near face's plane. The face is the drawing's (rear_behind_pin).
Top of the buffer-tower ring above the pin line1.573 in ± 0.0065 in 40 mmConfirmedWorked out: {std.ar15.buffer_tower_top_y}
Worked out 1.5735 in ± 0.0065 in used
{std.ar15.buffer_tower_top_y}, harvested
A mil-spec lower: the ring's top is the drawing's (1.325 above the deck).
Photo 1.575 in ± 0.01 in
right side: Primary Arms' photo ddfadb3e24e2, 05-2994-B_05, laid square onto the right face at 200 px/in by a homography fitted to the near rims of the Army drawing's six holes on it, each within 0.0034 in after the fit, harvested
Scale: the rectification's frame: takedown pin (319.5, 399.5), pivot (1594.5, 399.5) px, 200 px/in. Read by y_max of the traced outline (tools/trace.py): the ring's silhouette, from a lens 23 in away whose foot is 2 in under the ring's top
Photo 1.57 in ± 0.03 in
left side: Primary Arms' photo 80554f08bf56 laid square onto the left face at 200 px/in by an affine fit to the near rims of the drawing's six holes on it, each within 0.031 in after the fit; shown facing right, harvested
Scale: the rectification's frame: takedown pin (319.5, 399.5), pivot (1594.5, 399.5) px, 200 px/in; in the same rows the bolt catch's slot, the drawing's 3.203 to 3.375, reads 3.24 to 3.40: x read on this picture near the slot is taken 0.03 back, said in each reading. Read by y_max of the left outline traced as a check (tools/trace.py)
The drawing's; both photos' ring tops are within its ± and their own.
Buffer-tower front edge (the side walls' sweep up to the ring), X-0.418 in ± 0.008 in -10.6 mmProvisionalPhoto: right side: Primary Arms' photo ddfadb3e24e2 (05-2994-B_05) laid square onto the right face by the drawing's holes, the far wall's share taken off
Photo -0.418 in ± 0.008 in used
right side: Primary Arms' photo ddfadb3e24e2 (05-2994-B_05) laid square onto the right face by the drawing's holes, the far wall's share taken off, harvested
Scale: frame from the reviewed holes takedown, pivot (200.0 px/in, rms 0.000 in over 2 points). Read by x_max in x [-1.5, 3.0] in y [0.5, 1.4] of the traced outline (tools/trace.py)
Front edge of the walls' sweep up to the ring, above the deck.
The outline's front edge above the deck between Y 0.5 and 1.4. The ring's front face is the drawing's (std.ar15.buffer_tower_front_x) and the walls rise to it along the drawing's arc (std.ar15.rear_wall_arc_r): this figure is only how far forward the model's tower block is taken from the outline before that arc is cut.
Receiver top deck above the pin line0.255 in ± 0.015 in 6.5 mmProvisionalPhoto: right side: Primary Arms' photo ddfadb3e24e2 (05-2994-B_05) laid square onto the right face by the drawing's holes, the far wall's share taken off
Photo 0.255 in ± 0.015 in used
right side: Primary Arms' photo ddfadb3e24e2 (05-2994-B_05) laid square onto the right face by the drawing's holes, the far wall's share taken off, harvested
Scale: frame from the reviewed holes takedown, pivot (200.0 px/in, rms 0.000 in over 2 points). Read by top (tooth tops: the edge's max over 0.05 in windows) along x [0.6, 5.8] of the traced outline (tools/trace.py)
The near wall's top edge between the tower and the pivot lug: the drawing's deck is 0.2485 (std.ar15.deck_y).
std.ar15.deck_y is 0.2485 (.250 -.003): the outline's top between the tower and the pivot lug is a reading of that plane, and the model's deck is the plane itself (lib.deck_outline). The left picture's outline reads 0.230 there (its affine fit: the check fails by 0.004 past its ±).
Front of the pivot-pin lug ahead of the takedown pin6.555 in ± 0.011 in 166.5 mmProvisionalPhoto: right side: Primary Arms' photo ddfadb3e24e2 (05-2994-B_05) laid square onto the right face by the drawing's holes, the far wall's share taken off
Photo 6.555 in ± 0.011 in used
right side: Primary Arms' photo ddfadb3e24e2 (05-2994-B_05) laid square onto the right face by the drawing's holes, the far wall's share taken off, harvested
Scale: frame from the reviewed holes takedown, pivot (200.0 px/in, rms 0.000 in over 2 points). Read by x_max of the traced outline (tools/trace.py)
Front of the pivot-pin lug.
Lowest point below the pin line (the trigger guard's ears)2.35 in ± 0.03 in 59.7 mmProvisionalPhoto: right side: Primary Arms' photo ddfadb3e24e2 (05-2994-B_05) laid square onto the right face by the drawing's holes, the far wall's share taken off
Photo 2.35 in ± 0.03 in used
right side: Primary Arms' photo ddfadb3e24e2 (05-2994-B_05) laid square onto the right face by the drawing's holes, the far wall's share taken off, harvested
Scale: frame from the reviewed holes takedown, pivot (200.0 px/in, rms 0.000 in over 2 points). Read by −y_min of the traced outline (tools/trace.py)
Lowest point: the trigger guard's front ear, at the well's rear.
Magwell front face, X6.09 in ± 0.01 in 154.7 mmProvisionalPhoto: right side: Primary Arms' photo ddfadb3e24e2 (05-2994-B_05) laid square onto the right face by the drawing's holes, the far wall's share taken off
Photo 6.09 in ± 0.01 in used
right side: Primary Arms' photo ddfadb3e24e2 (05-2994-B_05) laid square onto the right face by the drawing's holes, the far wall's share taken off, harvested
Scale: frame from the reviewed holes takedown, pivot (200.0 px/in, rms 0.000 in over 2 points). Read by x_max in x [3.0, 7.0] in y [-1.5, -0.6] of the traced outline (tools/trace.py)
Front face of the magazine well.
Magazine well's outside walls, rear edge, X (right side)3.5 in ± 0.02 in 88.9 mmProvisionalPhoto: right side: Primary Arms' photo ddfadb3e24e2, 05-2994-B_05, laid square onto the right face at 200 px/in by a homography fitted to the near rims of the Army drawing's six holes on it, each within 0.0034 in after the fit
Photo 3.5 in ± 0.02 in used
right side: Primary Arms' photo ddfadb3e24e2, 05-2994-B_05, laid square onto the right face at 200 px/in by a homography fitted to the near rims of the Army drawing's six holes on it, each within 0.0034 in after the fit, harvested
Scale: the rectification's frame: takedown pin (319.5, 399.5), pivot (1594.5, 399.5) px, 200 px/in. Read by the edge's dark line between two lit ones in grey profiles along rows Y -1.6 and -2.0 (prof.py): 3.50 in both, from below the fence down to the trigger guard's front ear
On the right, the wall's rear edge runs up into the fence's front edge (3.545). The Workhorse's is 3.619, Bear Creek's 3.58.
Magazine well's outside walls, rear edge, X (left side)3.485 in ± 0.04 in 88.5 mmProvisionalPhoto: left side: Primary Arms' photo 80554f08bf56 laid square onto the left face at 200 px/in by an affine fit to the near rims of the drawing's six holes on it, each within 0.031 in after the fit; shown facing right
Photo 3.485 in ± 0.04 in used
left side: Primary Arms' photo 80554f08bf56 laid square onto the left face at 200 px/in by an affine fit to the near rims of the drawing's six holes on it, each within 0.031 in after the fit; shown facing right, harvested
Scale: the rectification's frame: takedown pin (319.5, 399.5), pivot (1594.5, 399.5) px, 200 px/in; in the same rows the bolt catch's slot, the drawing's 3.203 to 3.375, reads 3.24 to 3.40: x read on this picture near the slot is taken 0.03 back, said in each reading. Read by the step's dark line between two lit ones along row Y -1.5 (prof.py), at 3.515 on the picture, less 0.03
On the left the wall's rear edge is the step ahead of the trigger guard's front ear; above it curves back toward the bolt catch's bosses (magwell_wall_upper_rear_x_left). The Workhorse's is 3.455, Bear Creek's 3.48.
Magazine well's outside walls, rear edge above the step's curve, X (left side)2.945 in ± 0.04 in 74.8 mmProvisionalPhoto: left side: Primary Arms' photo 80554f08bf56 laid square onto the left face at 200 px/in by an affine fit to the near rims of the drawing's six holes on it, each within 0.031 in after the fit; shown facing right
Photo 2.945 in ± 0.04 in used
left side: Primary Arms' photo 80554f08bf56 laid square onto the left face at 200 px/in by an affine fit to the near rims of the drawing's six holes on it, each within 0.031 in after the fit; shown facing right, harvested
Scale: the rectification's frame: takedown pin (319.5, 399.5), pivot (1594.5, 399.5) px, 200 px/in; in the same rows the bolt catch's slot, the drawing's 3.203 to 3.375, reads 3.24 to 3.40: x read on this picture near the slot is taken 0.03 back, said in each reading. Read by the edge's dark line along rows Y 0.1 and -0.4 (prof.py), at 2.97 to 2.975 on the picture, less 0.03; straight from the deck down to the curve
The Workhorse's is 2.948, Bear Creek's 2.96.
Magazine well's outside walls, left side, where the rear edge starts to curve forward, Y-0.75 in ± 0.05 in -19 mmProvisionalPhoto: left side: Primary Arms' photo 80554f08bf56 laid square onto the left face at 200 px/in by an affine fit to the near rims of the drawing's six holes on it, each within 0.031 in after the fit; shown facing right
Photo -0.75 in ± 0.05 in used
left side: Primary Arms' photo 80554f08bf56 laid square onto the left face at 200 px/in by an affine fit to the near rims of the drawing's six holes on it, each within 0.031 in after the fit; shown facing right, harvested
Scale: the rectification's frame: takedown pin (319.5, 399.5), pivot (1594.5, 399.5) px, 200 px/in; in the same rows the bolt catch's slot, the drawing's 3.203 to 3.375, reads 3.24 to 3.40: x read on this picture near the slot is taken 0.03 back, said in each reading. Read by the edge's lit line on a 3.5x crop with a 0.05 in grid (g-left-curve.png): upright from the deck to about -0.75, then forward through (3.2, -0.95) and (3.4, -1.05)
Magazine well's outside walls, left side, where the rear edge's curve meets the step, Y-1.15 in ± 0.05 in -29.2 mmProvisionalPhoto: left side: Primary Arms' photo 80554f08bf56 laid square onto the left face at 200 px/in by an affine fit to the near rims of the drawing's six holes on it, each within 0.031 in after the fit; shown facing right
Photo -1.15 in ± 0.05 in used
left side: Primary Arms' photo 80554f08bf56 laid square onto the left face at 200 px/in by an affine fit to the near rims of the drawing's six holes on it, each within 0.031 in after the fit; shown facing right, harvested
Scale: the rectification's frame: takedown pin (319.5, 399.5), pivot (1594.5, 399.5) px, 200 px/in; in the same rows the bolt catch's slot, the drawing's 3.203 to 3.375, reads 3.24 to 3.40: x read on this picture near the slot is taken 0.03 back, said in each reading. Read by the same crop: the curve reaches the step's upright line at about -1.15, upright from there down
Between the two ends the edge is drawn as a smooth S (3t^2 - 2t^3), as the catalog's other forged lowers' is.
Bolt catch bosses: the rear boss's rear edge, X (left side)3.008 in ± 0.03 in 76.4 mmProvisionalPhoto: left side: Primary Arms' photo 80554f08bf56 laid square onto the left face at 200 px/in by an affine fit to the near rims of the drawing's six holes on it, each within 0.031 in after the fit; shown facing right
Photo 3.008 in ± 0.03 in used
left side: Primary Arms' photo 80554f08bf56 laid square onto the left face at 200 px/in by an affine fit to the near rims of the drawing's six holes on it, each within 0.031 in after the fit; shown facing right, harvested
Scale: the rectification's frame: takedown pin (319.5, 399.5), pivot (1594.5, 399.5) px, 200 px/in; in the same rows the bolt catch's slot, the drawing's 3.203 to 3.375, reads 3.24 to 3.40: x read on this picture near the slot is taken 0.03 back, said in each reading. Read by along row Y 0.1 (prof.py) the rear boss's rear edge stands 0.195 behind the slot's rear edge (3.045 and 3.24 on the picture): from the drawing's slot edge, 3.203 - 0.195
The Workhorse's is 3.013, Bear Creek's 3.05.
Bolt catch bosses: the gap between them (where the catch sits), rear edge, X3.203 in ± 0.007 in 81.4 mmConfirmedWorked out: {std.ar15.bolt_catch_slot_front_x} - {std.ar15.bolt_catch_slot_width}
Worked out 3.203 in ± 0.007 in used
{std.ar15.bolt_catch_slot_front_x} - {std.ar15.bolt_catch_slot_width}, harvested
The gap is the drawing's slot for the catch, at the left face.
Photo 3.24 in ± 0.04 in
left side: Primary Arms' photo 80554f08bf56 laid square onto the left face at 200 px/in by an affine fit to the near rims of the drawing's six holes on it, each within 0.031 in after the fit; shown facing right, harvested
Scale: the rectification's frame: takedown pin (319.5, 399.5), pivot (1594.5, 399.5) px, 200 px/in; in the same rows the bolt catch's slot, the drawing's 3.203 to 3.375, reads 3.24 to 3.40: x read on this picture near the slot is taken 0.03 back, said in each reading. Read by the gap's dark edge along row Y 0.1 (prof.py), as read on the picture (not moved)
The drawing's slot; the picture has it 0.037 ahead, inside its ±: the offset every x read near it on this picture is taken back by.
Bolt catch bosses: the gap's front edge, X3.375 in ± 0.005 in 85.7 mmConfirmedWorked out: {std.ar15.bolt_catch_slot_front_x}
Worked out 3.375 in ± 0.005 in used
{std.ar15.bolt_catch_slot_front_x}, harvested
The gap is the drawing's slot for the catch, at the left face.
Photo 3.4 in ± 0.04 in
left side: Primary Arms' photo 80554f08bf56 laid square onto the left face at 200 px/in by an affine fit to the near rims of the drawing's six holes on it, each within 0.031 in after the fit; shown facing right, harvested
Scale: the rectification's frame: takedown pin (319.5, 399.5), pivot (1594.5, 399.5) px, 200 px/in; in the same rows the bolt catch's slot, the drawing's 3.203 to 3.375, reads 3.24 to 3.40: x read on this picture near the slot is taken 0.03 back, said in each reading. Read by the gap's dark edge along row Y 0.1 (prof.py), as read on the picture (not moved)
The drawing's slot; the picture has it 0.025 ahead, inside its ±.
Bolt catch bosses: the front boss's front edge, X3.555 in ± 0.03 in 90.3 mmProvisionalPhoto: left side: Primary Arms' photo 80554f08bf56 laid square onto the left face at 200 px/in by an affine fit to the near rims of the drawing's six holes on it, each within 0.031 in after the fit; shown facing right
Photo 3.555 in ± 0.03 in used
left side: Primary Arms' photo 80554f08bf56 laid square onto the left face at 200 px/in by an affine fit to the near rims of the drawing's six holes on it, each within 0.031 in after the fit; shown facing right, harvested
Scale: the rectification's frame: takedown pin (319.5, 399.5), pivot (1594.5, 399.5) px, 200 px/in; in the same rows the bolt catch's slot, the drawing's 3.203 to 3.375, reads 3.24 to 3.40: x read on this picture near the slot is taken 0.03 back, said in each reading. Read by along row Y 0.1 (prof.py) the front boss's front edge stands 0.18 ahead of the slot's front edge (3.58 and 3.40 on the picture): from the drawing's slot edge, 3.375 + 0.18
The Workhorse's is 3.576, Bear Creek's 3.58.
Bolt catch bosses: their bottom edges, Y (they rise to the deck)-0.12 in ± 0.04 in -3 mmProvisionalPhoto: left side: Primary Arms' photo 80554f08bf56 laid square onto the left face at 200 px/in by an affine fit to the near rims of the drawing's six holes on it, each within 0.031 in after the fit; shown facing right
Photo -0.12 in ± 0.04 in used
left side: Primary Arms' photo 80554f08bf56 laid square onto the left face at 200 px/in by an affine fit to the near rims of the drawing's six holes on it, each within 0.031 in after the fit; shown facing right, harvested
Scale: the rectification's frame: takedown pin (319.5, 399.5), pivot (1594.5, 399.5) px, 200 px/in; in the same rows the bolt catch's slot, the drawing's 3.203 to 3.375, reads 3.24 to 3.40: x read on this picture near the slot is taken 0.03 back, said in each reading. Read by down column X 3.1 (prof.py): the boss's face to -0.06, its lower edge's shadow at -0.09, a lit fillet to -0.15, the wall from -0.2; the edge taken between
The Workhorse's is -0.05, Bear Creek's -0.14.
The raised band down the well's left wall, its rear edge, X3.975 in ± 0.003 in 101 mmProvisionalWorked out: {std.ar15.magwell_band_rear_x}
Worked out 3.975 in ± 0.003 in used
{std.ar15.magwell_band_rear_x}, harvested
The reference CAD model's band on a mil-spec forging (std.ar15.magwell_band_*), which the model draws; the rectified left photo has a line at about 3.98 from the deck to the lip (g-left-catch.png), not read finer.
A check that this forging has the standard's band where the standard has it.
The raised band down the well's left wall, its front edge, X4.549 in ± 0.003 in 115.5 mmProvisionalWorked out: {std.ar15.magwell_band_front_x}
Worked out 4.549 in ± 0.003 in used
{std.ar15.magwell_band_front_x}, harvested
The reference CAD model's band on a mil-spec forging, which the model draws; the rectified left photo has a line at about 4.6, the foot of the band's slope (4.549 + std.ar15.magwell_band_side), not read finer.
The magazine catch's fence, its flat face's rear edge, X2.955 in ± 0.02 in 75.1 mmProvisionalPhoto: right side: Primary Arms' photo ddfadb3e24e2, 05-2994-B_05, laid square onto the right face at 200 px/in by a homography fitted to the near rims of the Army drawing's six holes on it, each within 0.0034 in after the fit
Photo 2.955 in ± 0.02 in used
right side: Primary Arms' photo ddfadb3e24e2, 05-2994-B_05, laid square onto the right face at 200 px/in by a homography fitted to the near rims of the Army drawing's six holes on it, each within 0.0034 in after the fit, harvested
Scale: the rectification's frame: takedown pin (319.5, 399.5), pivot (1594.5, 399.5) px, 200 px/in. Read by the edge's dark line between two lit ones along row Y -0.6 (prof.py): 2.94 to 2.97
The Workhorse's is 3.02, Bear Creek's 2.97. The same line runs up to the deck as the roll's rear end (well_roll_rear_x).
The magazine catch's fence, its flat face's front edge, X3.545 in ± 0.02 in 90 mmProvisionalPhoto: right side: Primary Arms' photo ddfadb3e24e2, 05-2994-B_05, laid square onto the right face at 200 px/in by a homography fitted to the near rims of the Army drawing's six holes on it, each within 0.0034 in after the fit
Photo 3.545 in ± 0.02 in used
right side: Primary Arms' photo ddfadb3e24e2, 05-2994-B_05, laid square onto the right face at 200 px/in by a homography fitted to the near rims of the Army drawing's six holes on it, each within 0.0034 in after the fit, harvested
Scale: the rectification's frame: takedown pin (319.5, 399.5), pivot (1594.5, 399.5) px, 200 px/in. Read by along row Y -0.6 (prof.py): the face's lit edge at 3.52 to 3.54 and its foot's shadow at 3.55 to 3.60
The rib beside it runs forward from here to 3.92, from the roll down to a point (not drawn: how far it stands off the wall's face isn't read).
The magazine catch's fence, its flat face's top edge, Y-0.215 in ± 0.02 in -5.5 mmProvisionalPhoto: right side: Primary Arms' photo ddfadb3e24e2, 05-2994-B_05, laid square onto the right face at 200 px/in by a homography fitted to the near rims of the Army drawing's six holes on it, each within 0.0034 in after the fit
Photo -0.215 in ± 0.02 in used
right side: Primary Arms' photo ddfadb3e24e2, 05-2994-B_05, laid square onto the right face at 200 px/in by a homography fitted to the near rims of the Army drawing's six holes on it, each within 0.0034 in after the fit, harvested
Scale: the rectification's frame: takedown pin (319.5, 399.5), pivot (1594.5, 399.5) px, 200 px/in. Read by down column X 3.25 (prof.py): the shadow at -0.17 and the lit edge at -0.19 to -0.21, the fence's face from -0.22: where it meets the roll's lower edge
The magazine catch's fence, its flat face's bottom edge, Y-0.975 in ± 0.02 in -24.8 mmProvisionalPhoto: right side: Primary Arms' photo ddfadb3e24e2, 05-2994-B_05, laid square onto the right face at 200 px/in by a homography fitted to the near rims of the Army drawing's six holes on it, each within 0.0034 in after the fit
Photo -0.975 in ± 0.02 in used
right side: Primary Arms' photo ddfadb3e24e2, 05-2994-B_05, laid square onto the right face at 200 px/in by a homography fitted to the near rims of the Army drawing's six holes on it, each within 0.0034 in after the fit, harvested
Scale: the rectification's frame: takedown pin (319.5, 399.5), pivot (1594.5, 399.5) px, 200 px/in. Read by down column X 3.25 (prof.py): the fence's face to -0.93, lit -0.94 to -0.955, the edge's dark line at -0.97 to -0.99, lit again at -1.01
The Workhorse's is -0.91, Bear Creek's -0.93.
The magazine catch's fence, its flat face's corners, radius0.08 in ± 0.03 in 2 mmProvisionalPhoto: right side: Primary Arms' photo ddfadb3e24e2, 05-2994-B_05, laid square onto the right face at 200 px/in by a homography fitted to the near rims of the Army drawing's six holes on it, each within 0.0034 in after the fit
Photo 0.08 in ± 0.03 in used
right side: Primary Arms' photo ddfadb3e24e2, 05-2994-B_05, laid square onto the right face at 200 px/in by a homography fitted to the near rims of the Army drawing's six holes on it, each within 0.0034 in after the fit, harvested
Scale: the rectification's frame: takedown pin (319.5, 399.5), pivot (1594.5, 399.5) px, 200 px/in. Read by the corners' rounds on a 3x crop with a 0.05 in grid (g-right-fence.png), by eye against the grid
The roll along the top of the magazine well's right wall, its crest from the centre plane (Z)0.8 in ± 0.05 in 20.3 mmProvisionalWorked out: {bad-workhorse-lower.well_roll_crest_out}
Worked out 0.8 in ± 0.05 in used
{bad-workhorse-lower.well_roll_crest_out}, harvested
NOT READ ON THIS LOWER: a side view doesn't show how far a roll stands out, and no view on file looks along the receiver. The catalog's forged mil-spec lower's reading (the Workhorse's, through a camera fitted to its oblique photo and checked by its seller's 1.5 in width), which Bear Creek's has too; this lower's right side has the roll where those two have it (its lower edge -0.21 for their -0.204, its ends 2.955 and 6.25 for their 2.905 to 2.91 and 6.231 to 6.237).
The roll along the top of the well's right wall, its lower edge, Y-0.21 in ± 0.02 in -5.3 mmProvisionalPhoto: right side: Primary Arms' photo ddfadb3e24e2, 05-2994-B_05, laid square onto the right face at 200 px/in by a homography fitted to the near rims of the Army drawing's six holes on it, each within 0.0034 in after the fit
Photo -0.21 in ± 0.02 in used
right side: Primary Arms' photo ddfadb3e24e2, 05-2994-B_05, laid square onto the right face at 200 px/in by a homography fitted to the near rims of the Army drawing's six holes on it, each within 0.0034 in after the fit, harvested
Scale: the rectification's frame: takedown pin (319.5, 399.5), pivot (1594.5, 399.5) px, 200 px/in. Read by down column X 5.0 (prof.py): the roll's lit crest about +0.15, its lower edge's shadow at -0.17, a lit line at -0.19 to -0.20, the wall's face from -0.22
The Workhorse's and Bear Creek's are -0.204.
The roll along the top of the well's right wall, its rear end, X2.955 in ± 0.02 in 75.1 mmProvisionalPhoto: right side: Primary Arms' photo ddfadb3e24e2, 05-2994-B_05, laid square onto the right face at 200 px/in by a homography fitted to the near rims of the Army drawing's six holes on it, each within 0.0034 in after the fit
Photo 2.955 in ± 0.02 in used
right side: Primary Arms' photo ddfadb3e24e2, 05-2994-B_05, laid square onto the right face at 200 px/in by a homography fitted to the near rims of the Army drawing's six holes on it, each within 0.0034 in after the fit, harvested
Scale: the rectification's frame: takedown pin (319.5, 399.5), pivot (1594.5, 399.5) px, 200 px/in. Read by along row Y 0.05 (prof.py): a lit line at 2.92, the end's dark line at 2.95, the roll's rounded end lit from 2.98 to about 3.15
The Workhorse's is 2.905, Bear Creek's 2.91.
The roll along the top of the well's right wall, how far its rounded rear end runs before the roll is full0.17 in ± 0.05 in 4.3 mmProvisionalPhoto: right side: Primary Arms' photo ddfadb3e24e2, 05-2994-B_05, laid square onto the right face at 200 px/in by a homography fitted to the near rims of the Army drawing's six holes on it, each within 0.0034 in after the fit
Photo 0.17 in ± 0.05 in used
right side: Primary Arms' photo ddfadb3e24e2, 05-2994-B_05, laid square onto the right face at 200 px/in by a homography fitted to the near rims of the Army drawing's six holes on it, each within 0.0034 in after the fit, harvested
Scale: the rectification's frame: takedown pin (319.5, 399.5), pivot (1594.5, 399.5) px, 200 px/in. Read by along row Y 0.05 (prof.py): the lit rounding from the end's line at 2.955 to about 3.12, where the roll's face is level again; a reading of where the light changes, not of a profile
Worked out 0.19 in ± 0.05 in
{bad-workhorse-lower.well_roll_rear_round}, harvested
The Workhorse's, on its own right photo.
This lower's own photo; the Workhorse's agrees within both ±.
The roll along the top of the well's right wall, its front end (a flat face beside the pivot lug), X6.239 in ± 0.003 in 158.5 mmConfirmedWorked out: {std.ar15.pin_spacing} - {rise-lpk.pivot_pin_head_flat}
Photo 6.25 in ± 0.02 in
right side: Primary Arms' photo ddfadb3e24e2, 05-2994-B_05, laid square onto the right face at 200 px/in by a homography fitted to the near rims of the Army drawing's six holes on it, each within 0.0034 in after the fit, harvested
Scale: the rectification's frame: takedown pin (319.5, 399.5), pivot (1594.5, 399.5) px, 200 px/in. Read by along row Y -0.1 (prof.py): the roll's face level to 6.24, its end's dark line at 6.25 to 6.26, the pivot lug beyond
Worked out 6.2395 in ± 0.003 in used
{std.ar15.pin_spacing} - {rise-lpk.pivot_pin_head_flat}, harvested
Where the Army's pivot pin has the flat on its head (.1355 from its axis, drawing 8448621), turned to the rear: the flat lies against the roll's end, which can be no further forward.
A seat: the pivot pin's flat bears on the roll's end. This lower's photo has the end 0.0105 further forward, inside its ±; drawn there, the pin's head would stand in the roll.
The Workhorse's is 6.231, Bear Creek's 6.237.
The small blind hole in the roll's face behind the pivot lug, X5.322 in ± 0.01 in 135.2 mmProvisionalPhoto: right side: Primary Arms' photo ddfadb3e24e2, 05-2994-B_05, laid square onto the right face at 200 px/in by a homography fitted to the near rims of the Army drawing's six holes on it, each within 0.0034 in after the fit
Photo 5.322 in ± 0.01 in used
right side: Primary Arms' photo ddfadb3e24e2, 05-2994-B_05, laid square onto the right face at 200 px/in by a homography fitted to the near rims of the Army drawing's six holes on it, each within 0.0034 in after the fit, harvested
Scale: the rectification's frame: takedown pin (319.5, 399.5), pivot (1594.5, 399.5) px, 200 px/in. Read by the dark disc's two edges on a 2x crop with a 0.05 in grid (g-right-roll.png), 5.30 and 5.345
Bear Creek's has one 1.0 in behind its pivot pin; this one is 1.05.
The small blind hole in the roll's face, Y0 in ± 0.01 in 0 mmProvisionalPhoto: right side: Primary Arms' photo ddfadb3e24e2, 05-2994-B_05, laid square onto the right face at 200 px/in by a homography fitted to the near rims of the Army drawing's six holes on it, each within 0.0034 in after the fit
Photo 0 in ± 0.01 in used
right side: Primary Arms' photo ddfadb3e24e2, 05-2994-B_05, laid square onto the right face at 200 px/in by a homography fitted to the near rims of the Army drawing's six holes on it, each within 0.0034 in after the fit, harvested
Scale: the rectification's frame: takedown pin (319.5, 399.5), pivot (1594.5, 399.5) px, 200 px/in. Read by the dark disc's centre on the same crop: on the pin line
The small blind hole in the roll's face, diameter0.045 in ± 0.01 in 1.1 mmProvisionalPhoto: right side: Primary Arms' photo ddfadb3e24e2, 05-2994-B_05, laid square onto the right face at 200 px/in by a homography fitted to the near rims of the Army drawing's six holes on it, each within 0.0034 in after the fit
Photo 0.045 in ± 0.01 in used
right side: Primary Arms' photo ddfadb3e24e2, 05-2994-B_05, laid square onto the right face at 200 px/in by a homography fitted to the near rims of the Army drawing's six holes on it, each within 0.0034 in after the fit, harvested
Scale: the rectification's frame: takedown pin (319.5, 399.5), pivot (1594.5, 399.5) px, 200 px/in. Read by the dark disc's width on the same crop, about 9 px
The small blind hole in the roll's face, depth0.06 in ± 0.03 in 1.5 mmProvisionalWorked out: An assumption for the drawing, not a reading: no view on file looks into the hole. Deep enough to read as a hole, short of the roll's back.
Worked out 0.06 in ± 0.03 in used
An assumption for the drawing, not a reading: no view on file looks into the hole. Deep enough to read as a hole, short of the roll's back., harvested
The two oblong pads either side of the selector (left side), each one's length along the receiver0.35 in ± 0.03 in 8.9 mmProvisionalPhoto: left side: Primary Arms' photo 80554f08bf56 laid square onto the left face at 200 px/in by an affine fit to the near rims of the drawing's six holes on it, each within 0.031 in after the fit; shown facing right
Photo 0.35 in ± 0.03 in used
left side: Primary Arms' photo 80554f08bf56 laid square onto the left face at 200 px/in by an affine fit to the near rims of the drawing's six holes on it, each within 0.031 in after the fit; shown facing right, harvested
Scale: the rectification's frame: takedown pin (319.5, 399.5), pivot (1594.5, 399.5) px, 200 px/in; in the same rows the bolt catch's slot, the drawing's 3.203 to 3.375, reads 3.24 to 3.40: x read on this picture near the slot is taken 0.03 back, said in each reading. Read by the pad's rim, where the face ends round it, on a 3x crop with a 0.05 in grid (g-left-pads.png): the rear pad from 0.05 to 0.40, the front from 1.17 to 1.52, both from -0.205 to -0.43
Stadiums, their ends round: lit along their upper halves and dark along their lower halves in the square view, and lit along their upper edges in Primary Arms' three-quarter view from behind (86e395231fc0): raised, not pockets.
The oblong pads by the selector, each one's height0.225 in ± 0.03 in 5.7 mmProvisionalPhoto: left side: Primary Arms' photo 80554f08bf56 laid square onto the left face at 200 px/in by an affine fit to the near rims of the drawing's six holes on it, each within 0.031 in after the fit; shown facing right
Photo 0.225 in ± 0.03 in used
left side: Primary Arms' photo 80554f08bf56 laid square onto the left face at 200 px/in by an affine fit to the near rims of the drawing's six holes on it, each within 0.031 in after the fit; shown facing right, harvested
Scale: the rectification's frame: takedown pin (319.5, 399.5), pivot (1594.5, 399.5) px, 200 px/in; in the same rows the bolt catch's slot, the drawing's 3.203 to 3.375, reads 3.24 to 3.40: x read on this picture near the slot is taken 0.03 back, said in each reading. Read by the pad's rim, where the face ends round it, on a 3x crop with a 0.05 in grid (g-left-pads.png): the rear pad from 0.05 to 0.40, the front from 1.17 to 1.52, both from -0.205 to -0.43
The rear oblong pad's centre, X0.225 in ± 0.03 in 5.7 mmProvisionalPhoto: left side: Primary Arms' photo 80554f08bf56 laid square onto the left face at 200 px/in by an affine fit to the near rims of the drawing's six holes on it, each within 0.031 in after the fit; shown facing right
Photo 0.225 in ± 0.03 in used
left side: Primary Arms' photo 80554f08bf56 laid square onto the left face at 200 px/in by an affine fit to the near rims of the drawing's six holes on it, each within 0.031 in after the fit; shown facing right, harvested
Scale: the rectification's frame: takedown pin (319.5, 399.5), pivot (1594.5, 399.5) px, 200 px/in; in the same rows the bolt catch's slot, the drawing's 3.203 to 3.375, reads 3.24 to 3.40: x read on this picture near the slot is taken 0.03 back, said in each reading. Read by the pad's rim, where the face ends round it, on a 3x crop with a 0.05 in grid (g-left-pads.png): the rear pad from 0.05 to 0.40, the front from 1.17 to 1.52, both from -0.205 to -0.43
The front oblong pad's centre, X1.345 in ± 0.03 in 34.2 mmProvisionalPhoto: left side: Primary Arms' photo 80554f08bf56 laid square onto the left face at 200 px/in by an affine fit to the near rims of the drawing's six holes on it, each within 0.031 in after the fit; shown facing right
Photo 1.345 in ± 0.03 in used
left side: Primary Arms' photo 80554f08bf56 laid square onto the left face at 200 px/in by an affine fit to the near rims of the drawing's six holes on it, each within 0.031 in after the fit; shown facing right, harvested
Scale: the rectification's frame: takedown pin (319.5, 399.5), pivot (1594.5, 399.5) px, 200 px/in; in the same rows the bolt catch's slot, the drawing's 3.203 to 3.375, reads 3.24 to 3.40: x read on this picture near the slot is taken 0.03 back, said in each reading. Read by the pad's rim, where the face ends round it, on a 3x crop with a 0.05 in grid (g-left-pads.png): the rear pad from 0.05 to 0.40, the front from 1.17 to 1.52, both from -0.205 to -0.43
The oblong pads' centres, Y-0.317 in ± 0.03 in -8.1 mmProvisionalPhoto: left side: Primary Arms' photo 80554f08bf56 laid square onto the left face at 200 px/in by an affine fit to the near rims of the drawing's six holes on it, each within 0.031 in after the fit; shown facing right
Photo -0.317 in ± 0.03 in used
left side: Primary Arms' photo 80554f08bf56 laid square onto the left face at 200 px/in by an affine fit to the near rims of the drawing's six holes on it, each within 0.031 in after the fit; shown facing right, harvested
Scale: the rectification's frame: takedown pin (319.5, 399.5), pivot (1594.5, 399.5) px, 200 px/in; in the same rows the bolt catch's slot, the drawing's 3.203 to 3.375, reads 3.24 to 3.40: x read on this picture near the slot is taken 0.03 back, said in each reading. Read by the pad's rim, where the face ends round it, on a 3x crop with a 0.05 in grid (g-left-pads.png): the rear pad from 0.05 to 0.40, the front from 1.17 to 1.52, both from -0.205 to -0.43
The oblong pads by the selector, how far they stand off the face0.03 in ± 0.02 in 0.8 mmProvisionalWorked out: An assumption for the drawing, not a reading: no view on file shows a pad in profile. Raised by their light in two views (lit above, dark below in the square one; lit upper edges from above and behind); a few hundredths, as a forging's marks stand.
Worked out 0.03 in ± 0.02 in used
An assumption for the drawing, not a reading: no view on file shows a pad in profile. Raised by their light in two views (lit above, dark below in the square one; lit upper edges from above and behind); a few hundredths, as a forging's marks stand., harvested
The rib down the well's right wall beside the fence: its rear edge, X3.6 in ± 0.02 in 91.4 mmProvisionalPhoto: right side: Primary Arms' photo ddfadb3e24e2, 05-2994-B_05, laid square onto the right face at 200 px/in by a homography fitted to the near rims of the Army drawing's six holes on it, each within 0.0034 in after the fit
Photo 3.6 in ± 0.02 in used
right side: Primary Arms' photo ddfadb3e24e2, 05-2994-B_05, laid square onto the right face at 200 px/in by a homography fitted to the near rims of the Army drawing's six holes on it, each within 0.0034 in after the fit, harvested
Scale: the rectification's frame: takedown pin (319.5, 399.5), pivot (1594.5, 399.5) px, 200 px/in. Read by the rib's lit band between its two edges' lines, in grey profiles along rows Y -0.4 to -1.6 (prof.py) and a 3x crop with a 0.05 in grid (g-right-rib.png): its rear edge's line at 3.59 to 3.61 from the roll down to -1.0
A forging's rib that runs down from the roll, between the fence and the wall's face, to a point.
The rib's front edge, X3.9 in ± 0.02 in 99.1 mmProvisionalPhoto: right side: Primary Arms' photo ddfadb3e24e2, 05-2994-B_05, laid square onto the right face at 200 px/in by a homography fitted to the near rims of the Army drawing's six holes on it, each within 0.0034 in after the fit
Photo 3.9 in ± 0.02 in used
right side: Primary Arms' photo ddfadb3e24e2, 05-2994-B_05, laid square onto the right face at 200 px/in by a homography fitted to the near rims of the Army drawing's six holes on it, each within 0.0034 in after the fit, harvested
Scale: the rectification's frame: takedown pin (319.5, 399.5), pivot (1594.5, 399.5) px, 200 px/in. Read by the rib's lit band between its two edges' lines, in grey profiles along rows Y -0.4 to -1.6 (prof.py) and a 3x crop with a 0.05 in grid (g-right-rib.png): its front edge's dark line at 3.89 to 3.91 from the roll down to -1.2
The rib's rear edge: where it turns toward the point, Y-1 in ± 0.05 in -25.4 mmProvisionalPhoto: right side: Primary Arms' photo ddfadb3e24e2, 05-2994-B_05, laid square onto the right face at 200 px/in by a homography fitted to the near rims of the Army drawing's six holes on it, each within 0.0034 in after the fit
Photo -1 in ± 0.05 in used
right side: Primary Arms' photo ddfadb3e24e2, 05-2994-B_05, laid square onto the right face at 200 px/in by a homography fitted to the near rims of the Army drawing's six holes on it, each within 0.0034 in after the fit, harvested
Scale: the rectification's frame: takedown pin (319.5, 399.5), pivot (1594.5, 399.5) px, 200 px/in. Read by the rib's lit band between its two edges' lines, in grey profiles along rows Y -0.4 to -1.6 (prof.py) and a 3x crop with a 0.05 in grid (g-right-rib.png): upright to about -1.0, then forward and down
The rib's front edge: where it turns toward the point, Y-1.2 in ± 0.05 in -30.5 mmProvisionalPhoto: right side: Primary Arms' photo ddfadb3e24e2, 05-2994-B_05, laid square onto the right face at 200 px/in by a homography fitted to the near rims of the Army drawing's six holes on it, each within 0.0034 in after the fit
Photo -1.2 in ± 0.05 in used
right side: Primary Arms' photo ddfadb3e24e2, 05-2994-B_05, laid square onto the right face at 200 px/in by a homography fitted to the near rims of the Army drawing's six holes on it, each within 0.0034 in after the fit, harvested
Scale: the rectification's frame: takedown pin (319.5, 399.5), pivot (1594.5, 399.5) px, 200 px/in. Read by the rib's lit band between its two edges' lines, in grey profiles along rows Y -0.4 to -1.6 (prof.py) and a 3x crop with a 0.05 in grid (g-right-rib.png): upright to about -1.2, then back and down
The rib's lower point, X3.73 in ± 0.03 in 94.7 mmProvisionalPhoto: right side: Primary Arms' photo ddfadb3e24e2, 05-2994-B_05, laid square onto the right face at 200 px/in by a homography fitted to the near rims of the Army drawing's six holes on it, each within 0.0034 in after the fit
Photo 3.73 in ± 0.03 in used
right side: Primary Arms' photo ddfadb3e24e2, 05-2994-B_05, laid square onto the right face at 200 px/in by a homography fitted to the near rims of the Army drawing's six holes on it, each within 0.0034 in after the fit, harvested
Scale: the rectification's frame: takedown pin (319.5, 399.5), pivot (1594.5, 399.5) px, 200 px/in. Read by the rib's lit band between its two edges' lines, in grey profiles along rows Y -0.4 to -1.6 (prof.py) and a 3x crop with a 0.05 in grid (g-right-rib.png): the two edges meet at about (3.73, -1.50); along row -1.45 the band is 3.67 to 3.80, along -1.6 gone
The rib's lower point, Y-1.5 in ± 0.03 in -38.1 mmProvisionalPhoto: right side: Primary Arms' photo ddfadb3e24e2, 05-2994-B_05, laid square onto the right face at 200 px/in by a homography fitted to the near rims of the Army drawing's six holes on it, each within 0.0034 in after the fit
Photo -1.5 in ± 0.03 in used
right side: Primary Arms' photo ddfadb3e24e2, 05-2994-B_05, laid square onto the right face at 200 px/in by a homography fitted to the near rims of the Army drawing's six holes on it, each within 0.0034 in after the fit, harvested
Scale: the rectification's frame: takedown pin (319.5, 399.5), pivot (1594.5, 399.5) px, 200 px/in. Read by the rib's lit band between its two edges' lines, in grey profiles along rows Y -0.4 to -1.6 (prof.py) and a 3x crop with a 0.05 in grid (g-right-rib.png)
The rib's crest, how far it stands off the well wall's face0.04 in ± 0.03 in 1 mmProvisionalWorked out: An assumption for the drawing, not a reading: no view on file looks along the wall. A round rib, lit across its width in the square view and standing well under the roll beside it in the three-quarter views (14b65221cdc5, c758c0df7335).
Worked out 0.04 in ± 0.03 in used
An assumption for the drawing, not a reading: no view on file looks along the wall. A round rib, lit across its width in the square view and standing well under the roll beside it in the three-quarter views (14b65221cdc5, c758c0df7335)., harvested
What it goes with
By the way it mounts, and the figures each part on file states: a part whose figures say it doesn't fit is left out, and one whose fit can't be checked from what is published is marked. A check is against published figures, not a guarantee.
AR-15 receiver pins
- Uppers
- Aero Precision M4E1 Enhanced Upper Receiver Stripped, Aero Precision M4E1 Threaded upper receiver, BCM M4 Upper Receiver Assembly (w/ Laser T-Markings), Expo Arms 7075 Stripped AR-15 Upper Receiver, Geissele Automatics Super Duty Stripped Upper Receiver, Nordic Components 22RB .22 LR upper, 16", Palmetto State Armory AR-15 Stripped Upper Receiver, Panzer Arms AR57 ULT Complete AR-15 Upper Receiver - 5.7x28mm - 12", Panzer Arms AR57 Ultra Light Tactical Complete AR-15 Upper Receiver - 5.7x28mm - 16"
AR-15 receiver extension thread
- Folding stock adapters
- Law Tactical AR Folding Stock Adapter Gen 3-M, Law Tactical AR Folding Stock Adapter GEN-S, Sylvan Arms SA5 Pro AR15 Folding Stock Adapter (Opens To The Left), Sylvan Arms SA5 Pro AR15 Folding Stock Adapter (Opens To The Right)
- Receiver extensions
- BCM Milspec Carbine Receiver Extension (Buffer Tube) 6 Position, BCM MK2 Receiver Extension, Geissele Automatics Premium Mil-Spec Buffer Tube, Guntec USA AR-15 Mil-Spec Buffer Tube (Gen 2), SB Tactical SBPDW receiver extension, housing and integral castle nut, VLTOR RE-A5 7-Position Receiver Extension, MilSpec Diameter
AR-15 magazine well
AR-15 grip mount
AR-15 trigger guard ears
- Trigger guards
- Magpul MOE enhanced trigger guard, polymer
AR-15 fire-control group (mounting only)
AR-15 lower parts kit
- Lower parts kits
- CMMG Lower Parts Kit, AR15, Rise Armament Lower parts kit, less trigger
AR-15 safety selector
- Safety selectors
- CMMG Safety Selector, AR15, Radian Weapons Talon 45/90 - 2 Lever Kit
Prices on file
Each seller's latest reading of its own page: before tax and shipping, and not a quote. The pages are read again every night.
- Primary Arms $175.00 Black Nov 21, 2026, in stock that day
- Primary Arms $200.00 Desert Dirt Nov 21, 2026, in stock that day