Receiver extension
BCM MK2 Receiver Extension
The tube of BCM's MK2 recoil mitigation system, about three quarters of an inch longer than a carbine's, with eight stock positions. BCM: "Machined from 7075T6 and manufactured to Mil-Spec dimensions and specifications", "Hard Coat Anodized per Mil-A-8625F, Type III, Class 2"; "These tubes should be used with stocks such as USGI, BCM®™, Colt, LMT, SOPMOD, VLTOR, Stag Arms, and others that a made to the Mil-Spec size." It takes BCM's MK2 buffer and the M16 rifle action spring: "These buffer tubes require a M16 rifle action spring and specific BCM MK2 buffer, carbine and rifle buffers will NOT work." BCM's kit pages: "because of the MK2’s longer length some Mil-Spec stocks may not completely collapse closed all the way up to the M4 Lock nut."

- Weight
- 4.2 oz ± 0.3 oz Provisionalworked out: (0.785398163 * ({.tube_od} * {.tube_od} - {std.receiver_extension.bore_d} * {std.receiver_extension.bore_d}) * {.tube_length} + 0.785398163 * {std.receiver_extension.bore_d} * {std.receiver_extension.bore_d} * {.rear_wall} + {std.receiver_extension.rail_width} * ({std.receiver_extension.rail_bottom_below_axis} - {.tube_od} / 2) * ({.tube_length} - ({.rail_ramp_start} + {.rail_ramp_end}) / 2) - 8 * 0.785398163 * {.position_hole_d} * {.position_hole_d} * ({std.receiver_extension.rail_bottom_below_axis} - {.tube_od} / 2) - {.channel_width} * {.channel_depth} * 7 * {.position_step}) * {std.density.aluminium_7075}
- Lowest price
- $49.95 at BCM, read Nov 21, 2026
- Maker's number
- BCM-MK2-RE
- Colour
- Black (placeholder)
- Drawn as
- modelled
- Maker's page
- bravocompanyusa.com
In “Drop-in 16 in, Stealth Gray on BCM's MK2 lower”, a build on the start page, as it is.
Its figures
Every figure the site draws and checks it by, with where it came from. Open one for each source's reading, and why one is used where they differ.
The tube's outside diameter1.148 in 29.2 mmConfirmedWorked out: {std.receiver_extension.milspec_od}
Worked out “manufactured to Mil-Spec dimensions and specifications. Mil-Spec receiver extensions have a slightly smaller dimension where the stock slides on.” used
{std.receiver_extension.milspec_od}, harvested
Photo 1.148 in ± 0.006 in
BCM's BCM-INTERMEDIATE-RE-2: the tube's left side on white, thread to the left, 2166 x 800, harvested
Scale: its own thread, 16 to the inch (std.receiver_extension.thread_pitch): sixteen pitches along the silhouette's lower edge, 222 px (13.875 px a pitch, 222.0 px/in); the upper edge's ten 13.8. Read by the body's silhouette, 206.7 to 461.6 at its middle row's threshold crossings, 254.9 px, between the thread's relief and the rail's ramp (x 500 to 670)
A matte tube on white, 255 px tall: the edge's blur is a pixel in 255. The two agree to the pixel.
BCM says it is made to mil-spec dimensions; its own photo, scaled by the thread, reads the same.
The tube's length (its front face to its rear face)7.955 in ± 0.04 in 202.1 mmProvisionalPhoto: BCM's BCM-INTERMEDIATE-RE-2: the tube's left side on white, 2166 x 800
Photo 7.955 in ± 0.04 in used
BCM's BCM-INTERMEDIATE-RE-2: the tube's left side on white, 2166 x 800, harvested
Scale: its own thread, 16 to the inch: 222.0 px/in (tube_od's photo reading); the body's 254.9 px is the mil-spec 1.148 at that scale. Read by the silhouette's ends on the axis row: the thread's front rim at x 152.5, the rear face's rim at 1918.5 (both ends' faces are turned away from the lens, so each end is its rim, in the axis's plane): 1766 px
The ± is a fifth of a pixel a pitch over sixteen pitches, and the ends' half pixel. Corroborated by the free spring BCM shows beside it: in its kit photo (a copy on file) the tube is 525.5 px and the M16 rifle spring 824.7 px, which at this length is 12.48 in, where the Army's drawing of that spring has 12.50 (bcm-rifle-m16-action-spring.free_length).
Worked out “Mk2 Receiver Extension (approximately 3/4” longer than carbine), 7076T6, 8 position, Mil-Spec diameter”
{bcm-receiver-extension.tube_length} + 0.75in, harvested
Approximate on both counts: BCM's "approximately" and a carbine length that two generic pages give. BCM's maker site says of the system "the use of an M16A4 rifle spring in an rifle length buffer tube" (https://bravocompanymfg.com/accessories-rms-mk2.html): a rifle's extension is far longer than either figure here, and the photo and the kit pages agree that it is the intermediate length.
Read on BCM's own photo at the scale of its own thread, and corroborated by the free M16 spring beside it; BCM's "approximately 3/4” longer" over a generic carbine length agrees within its ±.
The tube's front face behind the takedown pin0.669 in ± 0.02 in 17 mmConfirmedWorked out: -{std.receiver_extension.front_face_x}
Worked out 0.669 in ± 0.02 in used
-{std.receiver_extension.front_face_x}, harvested
The thread's length from the tube's front face1.295 in ± 0.03 in 32.9 mmProvisionalPhoto: BCM's side view on white, 2166 x 800
Photo 1.295 in ± 0.03 in used
BCM's side view on white, 2166 x 800, harvested
Scale: its own thread, 222.0 px/in (tube_length). Read by the silhouette's crests and roots along both edges, from the front rim at x 152.5 to the last root at 434 below and 426 above and the plain band from 442: 287.5 px
The carbine's (std.receiver_extension.thread_length, the reference model's) is 1.181: this tube's runs a tenth further, to a plain band before the body (relief_length).
The plain band between the thread and the body: its diameter1.12 in ± 0.01 in 28.4 mmProvisionalPhoto: BCM's side view on white, 2166 x 800
Photo 1.12 in ± 0.01 in used
BCM's side view on white, 2166 x 800, harvested
Scale: its own thread, 222.0 px/in. Read by the silhouette from x 442 to 474, 207.6 to 456.3: 248.7 px
Just over the thread's minor diameter (1.109): a thread relief, also seen as a band in Primary Arms' oblique photo (6894abcbdefc).
The plain band between the thread and the body: its length0.144 in ± 0.02 in 3.7 mmProvisionalPhoto: BCM's side view on white, 2166 x 800
Photo 0.144 in ± 0.02 in used
BCM's side view on white, 2166 x 800, harvested
Scale: its own thread, 222.0 px/in. Read by from the thread's last root (x 440) to the body's shoulder (x 474): 32 px
The tube's rear wall, its thickness0.072 in ± 0.02 in 1.8 mmProvisionalWorked out: {std.receiver_extension.carbine_rear_wall}
Worked out 0.072 in ± 0.02 in used
{std.receiver_extension.carbine_rear_wall}, harvested
The hole through the rear wall, its diameter0.094 in ± 0.03 in 2.4 mmProvisionalWorked out: {std.receiver_extension.carbine_vent_d}
Worked out 0.094 in ± 0.03 in used
{std.receiver_extension.carbine_vent_d}, harvested
The rail's front ramp: where it leaves the tube, from the tube's front face2.35 in ± 0.02 in 59.7 mmProvisionalPhoto: BCM's side view on white, 2166 x 800
Photo 2.35 in ± 0.02 in used
BCM's side view on white, 2166 x 800, harvested
Scale: its own thread, 222.0 px/in. Read by the silhouette's lower edge leaves the tube's (461.6) at x 674, 521.5 px behind the front rim
The mil-spec carbine tube's begins at 2.326 (std.receiver_extension.rail_ramp_start).
The rail's front ramp: where it reaches the rail's full depth, from the tube's front face2.9 in ± 0.03 in 73.7 mmProvisionalPhoto: BCM's side view on white, 2166 x 800
Photo 2.9 in ± 0.03 in used
BCM's side view on white, 2166 x 800, harvested
Scale: its own thread, 222.0 px/in. Read by the lower edge reaches the rail's bottom (524) at x 797: a straight ramp of 29 degrees from x 674 (14 px down every 25 along)
Shallower than a mil-spec carbine tube's 45 degree ramp (std.receiver_extension.rail_ramp_end, 2.592).
The rail's rear end, cut back at 45 degrees: its length along the tube0.28 in ± 0.03 in 7.1 mmProvisionalPhoto: BCM's side view on white, 2166 x 800
Photo 0.28 in ± 0.03 in used
BCM's side view on white, 2166 x 800, harvested
Scale: its own thread, 222.0 px/in. Read by the lower edge leaves the rail's bottom at x 1852 and rises at 49 degrees to the tube's own at the rear rim (1912): 62 px
The position holes, diameter0.326 in ± 0.02 in 8.3 mmProvisionalPhoto: BCM's _TCK9381: the tube's underside on white, thread to the left, 1280 x 854
Photo 0.326 in ± 0.02 in used
BCM's _TCK9381: the tube's underside on white, thread to the left, 1280 x 854, harvested
Scale: the tube's length, 1136 px for 7.955 in (tube_length): 142.8 px/in at the axis; the rail's 0.49 (std.receiver_extension.rail_width) reads 68 px, the same scale to a pixel. Read by each of the eight round holes' outlines on a 2.86x crop, 46.5 px across
The front position hole (the stock collapsed): its centre behind the tube's front face3.506 in ± 0.03 in 89.1 mmProvisionalPhoto: BCM's underside view on white, 1280 x 854
Photo 3.506 in ± 0.03 in used
BCM's underside view on white, 1280 x 854, harvested
Scale: 142.8 px/in (position_hole_d). Read by the hole's centre at x 576.7 (the middle of its dark half on rows 418 to 426, and of its outline on the crop), the front rim at 76: 500.7 px
Where the carbine tube on file has its front hole (bcm-receiver-extension: 7.25 − 0.44 − 5 × 0.66 = 3.51): the stock collapses to the same place, and the MK2's two more holes are behind.
The position holes' spacing, the front three0.605 in ± 0.01 in 15.4 mmProvisionalPhoto: BCM's underside view on white, 1280 x 854
Photo 0.605 in ± 0.01 in used
BCM's underside view on white, 1280 x 854, harvested
Scale: 142.8 px/in (position_hole_d). Read by the holes' centres at x 576.7, 662.8 and 749.6: 86.1 and 86.8 px
The position holes' spacing, the rear six0.531 in ± 0.01 in 13.5 mmProvisionalPhoto: BCM's underside view on white, 1280 x 854
Photo 0.531 in ± 0.01 in used
BCM's underside view on white, 1280 x 854, harvested
Scale: 142.8 px/in (position_hole_d). Read by the holes' centres at x 749.6, 825.2, 901.5, 976.8, 1052.7 and 1129.0: 75.6 to 76.3 px apart, 75.9 on average
The rear hole is then 0.58 in ahead of the rear face (7.955 − 3.506 − 2 × 0.605 − 5 × 0.531), as it reads (1212 − 1129 = 83 px).
Counted: eight round holes in a channel along the rail, the three in front spaced wider than the six behind (the third is in both rows). Two crops of the photo and its row profiles give the same centres.
The stock position step (the holes' mean spacing, front to rear)0.552 in ± 0.01 in 14 mmProvisionalWorked out: (2 * {.position_pitch_front} + 5 * {.position_pitch_rear}) / 7
Worked out 0.552 in ± 0.01 in used
(2 * {.position_pitch_front} + 5 * {.position_pitch_rear}) / 7, harvested
What the app moves a stock by a position: one step for all eight. The holes aren't evenly spaced (position_pitch_front, position_pitch_rear): with this mean, the first and the eighth positions are where their holes are, and those between up to 0.06 in off theirs.
The channel the holes are in, along the rail: its width0.343 in ± 0.02 in 8.7 mmProvisionalPhoto: BCM's underside view on white, 1280 x 854
Photo 0.343 in ± 0.02 in used
BCM's underside view on white, 1280 x 854, harvested
Scale: 142.8 px/in (position_hole_d). Read by its two edges on a 2.86x crop, 49 px apart; its ends are round about the first and the last hole's centres
The channel along the rail: its depth0.04 in ± 0.02 in 1 mmProvisionalWorked out: An assumption for the drawing, not a reading: the only view of the channel is from straight under it, where its depth doesn't show; no section or end view of the rail is on file.
Worked out 0.04 in ± 0.02 in used
An assumption for the drawing, not a reading: the only view of the channel is from straight under it, where its depth doesn't show; no section or end view of the rail is on file., harvested
The long slot at the rail's front: its round rear end, behind the tube's front face3.13 in ± 0.03 in 79.5 mmProvisionalPhoto: BCM's underside view on white, 1280 x 854
Photo 3.13 in ± 0.03 in used
BCM's underside view on white, 1280 x 854, harvested
Scale: 142.8 px/in (position_hole_d). Read by on a 3x crop: a slot as wide as a hole runs from the foot of the ramp (x 410, which the side view has at 2.35) back to its round end at x 523: 447 px behind the front rim
The notch in the rail's rear end: how far it reaches in from the rear face0.26 in ± 0.03 in 6.6 mmProvisionalPhoto: BCM's underside view on white, 1280 x 854
Photo 0.26 in ± 0.03 in used
BCM's underside view on white, 1280 x 854, harvested
Scale: 142.8 px/in (position_hole_d). Read by on a 2.86x crop: a U as wide as a hole, open at the rear face (x 1212), its round end at x 1174.5: 37.5 px
What it goes with
By the way it mounts, and the figures each part on file states: a part whose figures say it doesn't fit is left out, and one whose fit can't be checked from what is published is marked. A check is against published figures, not a guarantee.
AR-15 receiver extension thread
- Lower receivers
- Aero Precision M4E1 complete lower, A2 grip and M4 stock, Aero Precision M4E1 Stripped Lower Receiver, Battle Arms Development Workhorse stripped lower, BCM MK2 AR-15 Lower Receiver, Bear Creek Arsenal BC-15 Multi Caliber, Lower Receiver, Black Anodized, Geissele Automatics Super Duty AR-15 Lower Receiver - Stripped Lower, Palmetto State Armory AR-15 "Stealth" Stripped Lower Receiver
- Folding stock adapters
- Law Tactical AR Folding Stock Adapter Gen 3-M, Law Tactical AR Folding Stock Adapter GEN-S, Sylvan Arms SA5 Pro AR15 Folding Stock Adapter (Opens To The Left), Sylvan Arms SA5 Pro AR15 Folding Stock Adapter (Opens To The Right)
Receiver extension (buffer tube)
- Stocks
- B5 Systems Bravo Stock, B5 Systems Enhanced SOPMOD Stock, BCM Stock - Mod 0, Magpul CTR carbine stock, mil-spec, Magpul MOE carbine stock, mil-spec, Magpul MOE SL carbine stock, mil-spec, Mission First Tactical BATTLELINK Minimalist Milspec Stock
- Braces
- SB Tactical SBA3® AR Adjustable Pistol Stabilizing Brace®, SB Tactical SBA4® AR Adjustable Pistol Stabilizing Brace®, SB Tactical SBA5® AR Adjustable Pistol Stabilizing Brace®
Receiver extension end
Receiver extension bore
- Buffers
- Armaspec Stealth™ Recoil Spring - SRS™- AR15 GEN4, C (3.3 oz), Armaspec Stealth™ Recoil Spring - SRS™- AR15 GEN4, H (3.8 oz), Armaspec Stealth™ Recoil Spring - SRS™- AR15 GEN4, H2 (4.7 oz), Armaspec Stealth™ Recoil Spring - SRS™- AR15 GEN4, H3 (5.6 oz), BCM Carbine Buffer, BCM H Carbine Buffer, BCM H2 Carbine Buffer, BCM H3 Carbine Buffer, BCM MK2 Buffer Mod 1 - T0, Geissele Automatics Super 42 Braided Wire Buffer Spring and Buffer Combo, H1, Geissele Automatics Super 42 Braided Wire Buffer Spring and Buffer Combo, H2, Geissele Automatics Super 42 Braided Wire Buffer Spring and Buffer Combo, H3, Guntec USA AR-15 Mil-Spec Car Buffer, Guntec USA AR-15 Stainless Steel Car Buffer, JP Enterprises Silent Captured Spring AR-15 Heavy H2 GEN 2, JP Enterprises Silent Captured Spring AR-15 Heavy H3 GEN 2, JP Enterprises Silent Captured Spring AR-15 Standard GEN 2, KynSHOT RB5000, KynSHOT RB5000HP (High Performance), Panzer Arms AR57 proprietary carbine buffer, VLTOR A5H2 Buffer, 5.3 oz.
- Buffer springs
- BCM Carbine Action Spring, BCM Rifle M16 Action Spring, Guntec USA Upgraded Chrome Silicon Spring, VLTOR A5 Action Spring
Prices on file
Each seller's latest reading of its own page: before tax and shipping, and not a quote. The pages are read again every night.
- BCM $49.95 Nov 21, 2026, in stock that day
- Primary Arms $49.95 Nov 21, 2026, in stock that day