Stock
Magpul MOE carbine stock, mil-spec
Magpul's plain A-frame carbine stock: a cheek round the tube, an open triangular frame, a 0.30 in rubber butt pad. Six positions on a mil-spec receiver extension. Magpul lists its length of pull 0.6 in shorter than the MOE SL's; seated from their photo of it on a rifle, it comes to 0.4.

- Weight
- 8.4 oz Conflictpublished: Magpul, MOE Carbine Stock - Mil-Spec (MAG400), the maker, read Oct 1, 2026Its sources span 7.95 oz to 8.58 oz.
- Lowest price
- $40.33 at Primary Arms, read Nov 17, 2026 (Black)
- Maker's number
- MAG400
- Colours
- Black, FDE, ODG, Stealth Gray
- Drawn as
- modelled
In “22RB carbine, scoped”, a build on the start page, as it is.
Its figures
Every figure the site draws and checks it by, with where it came from. Open one for each source's reading, and why one is used where they differ.
Overall length7 in ± 0.05 in 177.8 mmConflictPublished: Magpul, MOE Carbine Stock - Mil-Spec (MAG400), the maker, read Oct 1, 2026
Published “Length, max 7.0 in.” used
Magpul, MOE Carbine Stock - Mil-Spec (MAG400), the maker, read Oct 1, 2026 the page, harvested Oct 1, 2026
Published “Length: 6.9””
Primary Arms, MAG400-BLK, a seller, read Oct 1, 2026 the page, harvested Oct 1, 2026
Published “Length, max: 6.90 in.”
Big Tex Ordnance, MOE Carbine Stock, Mil-Spec (specifications), a seller, read Oct 1, 2026 the page, harvested Oct 1, 2026
Magpul's current page. Retailers carry 6.9, an older figure of Magpul's by its wording at Big Tex ("Length, max: 6.90 in.": to the hundredth, so its ± is half of that).
magpul and big-tex differ by 0.1 in beyond what each states it is good to.
Height5.2 in 132.1 mmConflictPublished: Magpul, MOE Carbine Stock - Mil-Spec (MAG400), the maker, read Oct 1, 2026
Published “Height, max 5.2 in.” used
Magpul, MOE Carbine Stock - Mil-Spec (MAG400), the maker, read Oct 1, 2026 the page, harvested Oct 1, 2026
Published “Height: 5.26"”
Wing Tactical, MOE Carbine Stock Mil-Spec, a seller, read Oct 1, 2026 the page, harvested Oct 1, 2026
Manufacturer; the retailer's two-decimal figure rounds to it.
magpul and wing differ by 0.06 in beyond what each states it is good to.
Width1.7 in 43.2 mmConflictPublished: Magpul, MOE Carbine Stock - Mil-Spec (MAG400), the maker, read Oct 1, 2026
Published “Width, max 1.7 in.” used
Magpul, MOE Carbine Stock - Mil-Spec (MAG400), the maker, read Oct 1, 2026 the page, harvested Oct 1, 2026
Published “Width: 1.59"”
Wing Tactical, MOE Carbine Stock Mil-Spec, a seller, read Oct 1, 2026 the page, harvested Oct 1, 2026
Not said where it is taken: the design patent's front view is 1.72 across the cheek and 1.25 across the butt.
Manufacturer, and the patent's end view agrees with it when scaled by the height.
magpul and wing differ by 0.11 in beyond what each states it is good to.
Length of pull, collapsed (the maker's reference rifle)10.3 in 261.6 mmConflictPublished: Magpul, MOE Carbine Stock - Mil-Spec (MAG400), the maker, read Oct 1, 2026
Published “LOP, M4 Collapsed ~10.3 in.” used
Magpul, MOE Carbine Stock - Mil-Spec (MAG400), the maker, read Oct 1, 2026 the page, harvested Oct 1, 2026
Published “Length of pull - Collapsed: ~10.5”
Primary Arms, MAG400-BLK, a seller, read Oct 1, 2026 the page, harvested Oct 1, 2026
Published “LOP, M4 Collapsed: ~10.7 in.”
Big Tex Ordnance, MOE Carbine Stock, Mil-Spec (specifications), a seller, read Oct 1, 2026 the page, harvested Oct 1, 2026
Magpul's current page. Retailers carry two earlier figures of Magpul's, 0.2 and 0.4 in longer.
magpul and primary-arms differ by 0.2 in beyond what each states it is good to.
magpul and big-tex differ by 0.4 in beyond what each states it is good to.
primary-arms and big-tex differ by 0.2 in beyond what each states it is good to.
Magpul has published three figures for this stock, and for the MOE SL three as well (11.1, 10.8, 10.9): taken pairwise from the highest down, the two stocks' difference comes out 0.4, 0.3 and 0.6 in, so it isn't what seats this one (butt_behind_pin_pos1).
Length of pull, extended (the maker's reference rifle)13.6 in 345.4 mmConflictPublished: Magpul, MOE Carbine Stock - Mil-Spec (MAG400), the maker, read Oct 1, 2026
Published “LOP, M4 Extended ~13.6 in.” used
Magpul, MOE Carbine Stock - Mil-Spec (MAG400), the maker, read Oct 1, 2026 the page, harvested Oct 1, 2026
Published “Length of pull - Extended: ~13.8””
Primary Arms, MAG400-BLK, a seller, read Oct 1, 2026 the page, harvested Oct 1, 2026
Published “LOP, M4 Extended: ~14.0 in.”
Big Tex Ordnance, MOE Carbine Stock, Mil-Spec (specifications), a seller, read Oct 1, 2026 the page, harvested Oct 1, 2026
Magpul's current page; the earlier figures move with the collapsed ones (the range is 3.3 in each time).
magpul and primary-arms differ by 0.2 in beyond what each states it is good to.
magpul and big-tex differ by 0.4 in beyond what each states it is good to.
primary-arms and big-tex differ by 0.2 in beyond what each states it is good to.
Length-of-pull adjustment range3.3 in 83.8 mmConfirmedPublished: Magpul, MOE Carbine Stock - Mil-Spec (MAG400), the maker, read Oct 1, 2026
Published “LOP Adjustment Range 3.3 in.” used
Magpul, MOE Carbine Stock - Mil-Spec (MAG400), the maker, read Oct 1, 2026 the page, harvested Oct 1, 2026
Worked out 3.3 in
{.lop_extended} - {.lop_collapsed}, harvested
Stated; the two lengths of pull differ by it.
Rubber butt pad, thickness0.3 in 7.6 mmConfirmedPublished: Magpul, MOE Carbine Stock - Mil-Spec (MAG400), the maker, read Oct 1, 2026
Published “Removable 0.30" Rubber Butt-Pad offers an anti-slip surface and increases impact protection” used
Magpul, MOE Carbine Stock - Mil-Spec (MAG400), the maker, read Oct 1, 2026 the page, harvested Oct 1, 2026
Tube axis below the stock's top edge (at its highest)0.706 in ± 0.02 in 17.9 mmCorroboratedPhoto: Magpul: the MOE Carbine on a rifle, right side, close, 1200 px
Photo 0.706 in ± 0.02 in used
Magpul: the MOE Carbine on a rifle, right side, close, 1200 px, harvested
Scale: the stock's own length, 641.4 px from the butt pad's rearmost point to the front face for Magpul's 7.0 in: 91.6 px/in (its height, 481 px for 5.2 in, gives 92.5). Not the tube's diameter: its limbs mirror the white ground, and it reads 102.1 px, 1.115 in. Read by the exposed tube's axis, midway between its limbs (row 480.2 at column 845), carried back along the top edge's 0.29° slope to the hump (row 476.8 at column 170), below the hump's top (412.2): 64.6 px
M6 first read 0.70 from the tube's diameter as the scale and the cheek's top without the slope: two slips that cancelled.
Photo 0.706 in ± 0.03 in
Magpul: the MOE Carbine on a whole rifle, straight right side, 1200 x 1200, harvested
Scale: the receiver's Picatinny rail, ten slots at 13.03 px (std.picatinny.slot_pitch): 33.07 px/in; the handguard's rail reads 33.0 and 32.97 further forward. Read by the exposed tube's axis, midway between its limbs (row 505.15 over columns 278 to 294; the rifle lies level), below the hump's top (481.8): 23.35 px
Photo 0.72 in ± 0.04 in
US D600,308 S, Magpul's design patent, FIG. 4 front elevation, 300 dpi, harvested
Scale: the figure's height and width = Magpul's 5.2 and 1.7 in (156.3 and 157.1 px/in: within 0.5%). Read by least-squares circle through the hidden-line bore (1.158 in across: the mil-spec tube's 1.148), its centre 112.6 px below the outline's top; ± for the dashes and the lines the fit takes in with them (rms 6 px)
The tube itself in the stock, in two of Magpul's photos that agree. The design patent's bore agrees within the two ±.
The highest point is the hump at the butt, 0.05 in above the cheek's top line (the side outline's y = 0).
Width of the frame below the tube: the upright, the strut and the brace0.69 in ± 0.08 in 17.5 mmProvisionalPhoto: US D600,308 S, Magpul's design patent, FIG. 4 front elevation, 300 dpi
Photo 0.69 in ± 0.08 in used
US D600,308 S, Magpul's design patent, FIG. 4 front elevation, 300 dpi, harvested
Scale: the figure's height = Magpul's 5.2 in (156.3 px/in). Read by the pair of lines inside the silhouette, read down columns 2.3 to 4.2 in below the top: 0.36 to 0.40 from the middle at 2.3 in, 0.29 to 0.36 at 3.9; ± is that taper
The cheek round the tube is the full 1.7 in and the butt about 1.25; the frame between them is much thinner. In the patent's front view it narrows from 0.78 in near the tube to 0.62 near the toe; one figure is used.
The butt pad's checkering: the pitch of its grid (both ways)0.122 in ± 0.007 in 3.1 mmProvisionalPhoto: US D600,308 S, Magpul's design patent, FIG. 5 rear elevation, 300 dpi: the butt pad's face
Photo 0.122 in ± 0.007 in used
US D600,308 S, Magpul's design patent, FIG. 5 rear elevation, 300 dpi: the butt pad's face, harvested
Scale: the sheet's scale, which FIG. 4 beside it gives: its height = Magpul's 5.2 in (156.3 px/in; FIG. 4 and FIG. 5 span the same 837 px). Read by the period of the grid's lines along the pad's height in the checkered band (autocorrelation of the column sums: 19 px, ± 1 px); across the width the squares read the same by eye (their X diagonals halve the period there)
The pad's face is checkered in square pyramids (FIG. 1, FIG. 5): a grid, the same pitch along the height and across.
The butt pad's checkering: how deep its grooves are0.033 in ± 0.012 in 0.8 mmCorroboratedPhoto: US D600,308 S, Magpul's design patent, FIG. 2 right side elevation, 300 dpi
Photo 0.033 in ± 0.012 in used
US D600,308 S, Magpul's design patent, FIG. 2 right side elevation, 300 dpi, harvested
Scale: the figure's height = Magpul's 5.2 in (135.4 px/in). Read by the butt edge's serrations, peak to peak in 12-row windows along its checkered length (detrended): median 4.5 px; the scan's dotted stroke alone wanders 2 to 3 px, which the ± covers
Photo 0.027 in ± 0.012 in
US D600,308 S, FIG. 3 left side elevation, 300 dpi, harvested
Scale: the sheet's scale (FIG. 2's height = Magpul's 5.2 in: 135.4 px/in). Read by the butt edge's top boundary over cols 720-1180, detrended, folded on its period (15.96 px): peak to valley 3.6 px of the mean tooth; FIG. 2 by the same method 4.0 px (0.030)
The first reading; FIG. 3 by the folded profile agrees within its ±.
Seen edge-on along the butt in the side elevation: the pyramids' tips stand this far proud of the grooves between them. Their faces slope: folded on its period, the edge-on profile is a triangle wave (0.13-0.20 px rms against 0.29-0.33 for square grooves); the pyramids touch at their bases; a flat under 0.024 in at their tips can't be resolved.
The butt pad's checkering: where it begins below the pad's top1.27 in ± 0.05 in 32.3 mmProvisionalPhoto: US D600,308 S, Magpul's design patent, FIG. 5 rear elevation, 300 dpi: the butt pad's face
Photo 1.27 in ± 0.05 in used
US D600,308 S, Magpul's design patent, FIG. 5 rear elevation, 300 dpi: the butt pad's face, harvested
Scale: the sheet's scale, which FIG. 4 beside it gives: its height = Magpul's 5.2 in (156.3 px/in; FIG. 4 and FIG. 5 span the same 837 px). Read by the first column of the grid, 198 px from the pad's top end
Above it the pad is smooth round the tube's end (FIG. 5).
Lock pin behind the stock's front face2.37 in ± 0.04 in 60.2 mmProvisionalPhoto: Magpul: the MOE Carbine on a rifle, right side, close, 1200 px
Photo 2.37 in ± 0.04 in used
Magpul: the MOE Carbine on a rifle, right side, close, 1200 px, harvested
Scale: the stock's own length, 641.4 px for Magpul's 7.0 in: 91.6 px/in. Read by the pin's shaft (dark over columns 530 to 553: 0.25 in across) centred 216.7 px behind the front face (column 758.2)
The steel pin the latch draws out of the receiver extension's holes; its lower end shows in the slot beside the latch. Where it stands says which hole the stock is on.
Butt behind the takedown pin as Magpul photographed it: two steps out (position 3)10.016 in ± 0.081 in 254.4 mmProvisionalPhoto: Magpul: the MOE Carbine on a whole rifle, straight right side, 1200 x 1200
Photo 10.016 in ± 0.081 in used
Magpul: the MOE Carbine on a whole rifle, straight right side, 1200 x 1200, harvested
Scale: frame from the reviewed holes takedown, pivot, selector (33.0 px/in, rms 0.011 in over 3 points). Read by −x of the fitted profile's origin of the traced outline (tools/trace.py); the traced side outline's origin (the butt pad's rearmost point), fitted by rotation and translation at the outline's own scale to the stock's edges against the background
Which position it is in: its front face stands 1.31 in behind the castle nut here and 1.41 in in Magpul's closer view (5f6775e35c7e), and a stock can't pass the nut, so it is at most two steps out (2 × 0.66); one step out would leave it 0.65 in short of the nut when collapsed and its length of pull longer than the MOE SL's, which Magpul lists longer by 0.3 to 0.6 in. The ± covers the picture's perspective, read edge by edge: the lens is about 100 in away (the stock's front face shows as a 0.17 in sliver, and the stock reads 7.18 in long between its near edges), which puts the pins' heads 0.04 nearer the butt than their axis and the butt's near edge 0.1 behind its mid-plane: 9.97 so corrected. The two photos disagree by 0.1 in on where the stock sits behind the nut; neither says why.
Butt behind the takedown pin at position 1 (collapsed), on a carbine receiver extension8.696 in ± 0.081 in 220.9 mmProvisionalWorked out: {.butt_behind_pin_pos3} - 2 * {.lop_range} / 5
Worked out 8.696 in ± 0.081 in used
{.butt_behind_pin_pos3} - 2 * {.lop_range} / 5, harvested
Two of the five steps of Magpul's 3.3 in range. ± is the photo's.
Worked out 8.809 in ± 0.07 in
{bcm-receiver-extension.tube_front_behind_pin} + {bcm-receiver-extension.tube_length} - {bcm-receiver-extension.position_hole_rear_from_rear} - 5 * {bcm-receiver-extension.position_step} - {.lock_pin_behind_front} + {.length}, harvested
The lock pin in the tube's front hole. ± for the hole's place (0.03), the tube's seat (0.02) and the pin's (0.04), and for the tube's length, which is a generic figure.
Worked out 8.655 in ± 0.12 in
{magpul-moe-sl-carbine.butt_behind_pin_pos1} - ({magpul-moe-sl-carbine.lop_collapsed} - {.lop_collapsed}), harvested
± is the SL seat's, and Magpul's two lengths of pull each given to a tenth with a tilde. With the figures retailers still carry for both stocks (10.8 and 10.5) it comes to 8.955.
Measured on a photo of the stock on a rifle; the tube's holes and the stock's lock pin agree within the two ±, and so do Magpul's current lengths of pull for it and the MOE SL, since that stock's seat was read again (2026-10-05): 0.04 in less, its front at the castle nut's rear face.
No photo on file shows it collapsed. Three ways to it: Magpul's photo of it two steps out, less the two steps; the tube's front hole (the Army's drawings seat the tube, BCM's photo places its holes) and where the stock's lock pin stands; and Magpul's lengths of pull for this stock and the MOE SL, whose seat is measured. The three agree within their ±: the first two leave its front face 0.03 and 0.14 in clear of the castle nut (bcm-castle-nut.rear_face_behind_pin), the last has it 0.01 inside. Until 2026-10-05 the last had it 0.20 in inside the nut, which couldn't be: it was the MOE SL's seat that was off, 0.19 in too far forward by a photo read at the wrong scale.
The bore for the receiver extension, as the patent draws it1.158 in ± 0.04 in 29.4 mmProvisionalPhoto: US D600,308 S, Magpul's design patent, FIG. 4 front elevation, 300 dpi
Photo 1.158 in ± 0.04 in used
US D600,308 S, Magpul's design patent, FIG. 4 front elevation, 300 dpi, harvested
Scale: the figure's height and width = Magpul's 5.2 and 1.7 in (156.3 and 157.1 px/in: within 0.5%). Read by the diameter of the least-squares circle through the hidden-line bore; ± is the fit's rms (6 px: the dashes, and the lines the fit takes in with them)
No published bore is on file for this stock, only that it is the Mil-Spec model (std.receiver_extension.milspec_od is 1.148). This is the circle tube_axis_below_top's patent reading takes its centre from. It isn't a clearance: its ± is wider than any, and the tube's own size lies inside it.
Width of the channel under the bore, for the receiver extension's indexing rail0.49 in ± 0.005 in 12.4 mmConfirmedWorked out: {std.receiver_extension.rail_width}
Worked out 0.49 in ± 0.005 in used
{std.receiver_extension.rail_width}, harvested
Not read from this stock: the mil-spec tube's rail at its own width, with nothing to spare (no clearance is known). The patent's FIG. 4 draws the keyhole mouth; its neck hasn't been read.
Floor of the indexing rail's channel, below the tube axis0.874 in ± 0.005 in 22.2 mmCorroboratedWorked out: {std.receiver_extension.rail_bottom_below_axis}
Worked out 0.874 in ± 0.005 in used
{std.receiver_extension.rail_bottom_below_axis}, harvested
Not read from this stock: where the mil-spec tube's rail ends below its axis, with nothing to spare (no clearance is known).
What it goes with
By the way it mounts, and the figures each part on file states: a part whose figures say it doesn't fit is left out, and one whose fit can't be checked from what is published is marked. A check is against published figures, not a guarantee.
Receiver extension (buffer tube)
Prices on file
Each seller's latest reading of its own page: before tax and shipping, and not a quote. The pages are read again every night.
- Primary Arms $40.33 Black Nov 17, 2026, in stock that day
- Primary Arms $40.33 FDE Nov 17, 2026, in stock that day
- Wing Tactical $45.95 Nov 21, 2026, in stock that day
- Midwest Gun Works $47.45 Black Nov 21, 2026, in stock that day
- MidwayUSA $47.45 Black Nov 21, 2026, in stock that day
- MidwayUSA $47.45 FDE Nov 21, 2026, in stock that day
- MidwayUSA $47.45 ODG Nov 21, 2026, in stock that day
- MidwayUSA $47.45 Stealth Gray Nov 21, 2026, in stock that day
- Magpul $49.95 Nov 21, 2026, stock not said
- Primary Arms $40.33 ODG Nov 17, 2026, out of stock that day