Receiver extension
Guntec USA AR-15 Mil-Spec Buffer Tube (Gen 2)
Guntec's mil-spec carbine buffer tube, the Gen 2, six positions, anodized aluminium in twelve colours, sold alone without its end plate, castle nut, buffer or spring. Guntec, every page of it: "MIL-SPEC Gen 2 Tube Design With Notch Cut Out For Buffer Detent To Engage", "Six Position", "Compatible With SBA Tactical Braces" (the coloured ones), "US Made", "T6 Aluminum", "Weight: 3.3 oz", "Material Grade: 6061", "Caliber: .308 Caliber, 5.56 Caliber, 9mm Caliber"; the black one, which Guntec calls Plain: "Product Height 1.4375"", "Product Width 1.125"", "Product Length 7.25"", "Product Weight 3.4 oz". Sellers: "GUNTEC AR-15|AR-10 MIL-SPEC BUFFER TUBE" (the2ndtactical.com, "6 POSITION", "CARBINE", "MIL-SPEC", "FITS AR15 AND AR10"); "6-position carbine-length Mil-Spec receiver extension machined from T6-6061 aluminum" (Redcon1 Tactical, Guntec's red set). The notch shows in every photo on file as a slot through the thread's crests under the mouth at six o'clock, and Guntec's close-ups of the black one show a small notch in the rim there.

- Weight
- 3.3 oz Conflictpublished: Guntec USA, AR-15 Mil-Spec Buffer Tube (Gen 2) (Anodized Clear), MILTUBE-G2-CLEAR, its description (the same line on all twelve pages of the tube, each colour and the Plain); the page as the user saved it, a copy on file, the maker, read Oct 19, 2026Its sources span 3.25 oz to 3.8 oz.
- Lowest price
- $34.99 at The 2nd Tactical, read Nov 21, 2026 (Anodized Clear)
- Maker's number
- MILTUBE-G2-CLEAR
- Colours
- Anodized Clear, Anodized Red, Anodized Gold, Anodized Black, Anodized Blue, Anodized Bronze, Anodized Green, Anodized Grey, Anodized Irish Green, Anodized Orange, Anodized Pink, Anodized Purple
- Drawn as
- modelled
- Maker's page
- guntecusa.com
In “22RB .22 LR rifle”, a build on the start page, in place of its BCM Milspec Carbine Receiver Extension (Buffer Tube) 6 Position.
Its figures
Every figure the site draws and checks it by, with where it came from. Open one for each source's reading, and why one is used where they differ.
The tube's outside diameter1.148 in 29.2 mmConfirmedWorked out: {std.receiver_extension.milspec_od}
Worked out 1.148 in used
{std.receiver_extension.milspec_od}, harvested
The standard mil-spec carbine tube's: the sellers sell it as mil-spec.
Published “Buffer Tube Diameter Mil-Spec (1.148")”
Redcon1 Tactical, Guntec USA AR-15 Mil-Spec Buffer Tube Kit - Anodized Red (MILTUBESET-RED), a seller, read Oct 18, 2026 the page, harvested Oct 18, 2026
Guntec's red tube as sold in its set ("6-position carbine-length Mil-Spec receiver extension machined from T6-6061 aluminum"); the set's page doesn't say Gen 2.
Published “Product Width 1.125"”
Guntec USA, AR-15 Mil-Spec Buffer Tube (Gen 2) (Plain), MILTUBE-G2, its Additional Information; the page as the user saved it, a copy on file, the maker, read Oct 19, 2026 the page, from the site owner
Guntec's three sizes are sixteenths of an inch (1 1/8, 1 7/16, 7 1/4; 1.125 and 1.4375 are those fractions written out), so each is taken to its nearest sixteenth, a thirty-second either way: the mil-spec 1.148 is 1 1/8 to the sixteenth. Narrower than the thread's 1 3/16 crests, so it is the body's width, not the thread's.
The standard's; the one seller's page that states a diameter for Guntec's tube says the same, and Guntec's own width, a sixteenth's figure, agrees with it.
Sold as mil-spec: the2ndtactical, "GUNTEC AR-15|AR-10 MIL-SPEC BUFFER TUBE - ANODIZED CLEAR" with the tags "6 POSITION", "CARBINE", "MIL-SPEC" (https://the2ndtactical.com/guntec-ar-15-ar-10-mil-spec-buffer-tube-anodized-clear.html, read 2026-10-18).
The tube's front face behind the takedown pin (how far it screws in)0.669 in ± 0.02 in 17 mmConfirmedWorked out: -{std.receiver_extension.front_face_x}
Worked out 0.669 in ± 0.02 in used
-{std.receiver_extension.front_face_x}, harvested
The Army's drawings: a mil-spec tube is screwed in until its edge stands over the buffer retainer's shoulder.
Hidden inside the receiver: what it moves is the rail's ramp, the channel and the six holes.
The tube's length7.25 in ± 0.02 in 184.1 mmConfirmedPublished: Magpul, "M4 Receiver Extension, Carbine, Military" partial drawing (rev A, 2008-03-24), hosted by ar15tactical.com, the maker, read Oct 18, 2026
Published “7.25 (the side view's overall length; "TWO PLACE DECIMAL .020")” used
Magpul, "M4 Receiver Extension, Carbine, Military" partial drawing (rev A, 2008-03-24), hosted by ar15tactical.com, the maker, read Oct 18, 2026 the page, harvested Oct 18, 2026
The drawing of the mil-spec carbine tube, which std.receiver_extension's rail figures are read on; a stock maker's drawing of the tube its stocks fit. Guntec's is sold as a mil-spec carbine tube.
Published “Product Length 7.25"”
Guntec USA, AR-15 Mil-Spec Buffer Tube (Gen 2) (Plain), MILTUBE-G2, its Additional Information; the page as the user saved it, a copy on file, the maker, read Oct 19, 2026 the page, from the site owner
In sixteenths of an inch, as its other two sizes are (tube_od): taken to its nearest sixteenth.
The two agree. Magpul's drawing is read to its two places (± 0.02), Guntec's figure to a sixteenth; the drawing's is the finer.
Guntec's own page of the black (Plain) tube states its length, 7.25 in ("Product Length"; saved by the user, 2026-10-19): the same figure as Magpul's drawing of the mil-spec carbine tube.
The tube's height, its top to its rail's bottom1.448 in ± 0.005 in 36.8 mmCorroboratedWorked out: {.tube_od} / 2 + {std.receiver_extension.rail_bottom_below_axis}
Worked out 1.448 in ± 0.005 in used
{.tube_od} / 2 + {std.receiver_extension.rail_bottom_below_axis}, harvested
Half the mil-spec outside diameter over the axis, and Magpul's drawing's rail bottom under it.
Published “Product Height 1.4375"”
Guntec USA, AR-15 Mil-Spec Buffer Tube (Gen 2) (Plain), MILTUBE-G2, its Additional Information; the page as the user saved it, a copy on file, the maker, read Oct 19, 2026 the page, from the site owner
1 7/16 in, in sixteenths as its other two sizes are (tube_od): taken to its nearest sixteenth.
The figures the model is drawn to; Guntec's, to its sixteenth, agrees (1.448 is 1 7/16 to the sixteenth).
A check of the rail's depth on Guntec's own tube: the standard's tube and rail come to it within its sixteenth.
The stock position step0.66 in 16.8 mmConfirmedWorked out: {magpul-moe-sl-carbine.position_step}
Worked out 0.66 in used
{magpul-moe-sl-carbine.position_step}, harvested
Magpul's MOE SL travel over a mil-spec carbine tube's six positions.
A property of a mil-spec carbine tube: any stock on it moves by this. No page on file gives Guntec's.
The position holes' diameter (in the rail)0.42 in ± 0.03 in 10.7 mmProvisionalWorked out: An assumption for the drawing, not a reading: no view on file shows Guntec's holes square on (the gold set's photo, 0b3672e01b07, shows them in the channel from far off at a slant). Taken as the hole a mil-spec carbine tube has, read on BCM's (bcm-receiver-extension.position_hole_d, 0.42 ± 0.03), since a stock's lock pin goes into either.
Worked out 0.42 in ± 0.03 in used
An assumption for the drawing, not a reading: no view on file shows Guntec's holes square on (the gold set's photo, 0b3672e01b07, shows them in the channel from far off at a slant). Taken as the hole a mil-spec carbine tube has, read on BCM's (bcm-receiver-extension.position_hole_d, 0.42 ± 0.03), since a stock's lock pin goes into either., harvested
The rear position hole's centre ahead of the tube's rear face0.44 in ± 0.03 in 11.2 mmProvisionalWorked out: An assumption for the drawing, not a reading: no view on file shows Guntec's holes square on. Taken as a mil-spec carbine tube's, read on BCM's (bcm-receiver-extension.position_hole_rear_from_rear, 0.44 ± 0.03); the channel the holes lie in begins 0.45 in ahead of the rear face in the clear tube's photo (channel_rear_from_rear), which agrees.
Worked out 0.44 in ± 0.03 in used
An assumption for the drawing, not a reading: no view on file shows Guntec's holes square on. Taken as a mil-spec carbine tube's, read on BCM's (bcm-receiver-extension.position_hole_rear_from_rear, 0.44 ± 0.03); the channel the holes lie in begins 0.45 in ahead of the rear face in the clear tube's photo (channel_rear_from_rear), which agrees., harvested
The channel along the rail's underside, its rear end ahead of the tube's rear face0.45 in ± 0.06 in 11.4 mmProvisionalPhoto: the2ndtactical's 1200 px copy of Guntec's own photograph of the clear tube, 1b50c33def5f, a three-quarter view of its right side from in front and a little below
Photo 0.45 in ± 0.06 in used
the2ndtactical's 1200 px copy of Guntec's own photograph of the clear tube, 1b50c33def5f, a three-quarter view of its right side from in front and a little below, harvested
Scale: the tube's length (tube_length, 7.25 in) between its rear face (the rail's rear corner and the tube's top rear corner, 107 to 111 px along the axis) and the front face's centre (1211 px along the axis): 152 px/in along the tube's axis, drawn at 7° in the picture. Read by the channel's rear rounded end, at image (99, 635), projected onto the axis: 0.45 in ahead of the rear face. The ± is the picture's mild perspective (its edges converge 2.5°) and the ends' reading on a 2x crop.
Guntec's tube has a long shallow channel along its rail's underside with rounded ends, the six holes in its floor: seen along the rail in the clear tube's picture and from below in the gold set's (0b3672e01b07).
The channel along the rail's underside, its front end ahead of the tube's rear face3.82 in ± 0.08 in 97 mmProvisionalPhoto: the2ndtactical's picture of the clear tube, 1200 px
Photo 3.82 in ± 0.08 in used
the2ndtactical's picture of the clear tube, 1200 px, harvested
Scale: the tube's length (tube_length, 7.25 in), 152 px/in along the axis (channel_rear_from_rear). Read by the channel's front rounded end, at image (606, 712), projected onto the axis: 3.82 in ahead of the rear face. Behind the front hole's centre by the step's 0.66 times five from the rear hole's 0.44 (3.74), it reaches 0.08 in past it.
The channel along the rail's underside, its width0.25 in ± 0.06 in 6.3 mmProvisionalWorked out: An assumption for the drawing, not a reading: no view on file shows the rail's underside square on. The gold set's photo (0b3672e01b07) has the channel narrower than the rail's 0.49 and its rounded ends about half its width across; the holes (0.42) cut through its sides.
Worked out 0.25 in ± 0.06 in used
An assumption for the drawing, not a reading: no view on file shows the rail's underside square on. The gold set's photo (0b3672e01b07) has the channel narrower than the rail's 0.49 and its rounded ends about half its width across; the holes (0.42) cut through its sides., harvested
The channel along the rail's underside, its depth0.03 in ± 0.015 in 0.8 mmProvisionalWorked out: An assumption for the drawing, not a reading: no view on file shows the channel in section; the clear tube's picture has it a shallow recess whose far wall shows as a thin lit band.
Worked out 0.03 in ± 0.015 in used
An assumption for the drawing, not a reading: no view on file shows the channel in section; the clear tube's picture has it a shallow recess whose far wall shows as a thin lit band., harvested
The rail's rear lower edge, its chamfer (along the tube)0.1 in ± 0.03 in 2.5 mmProvisionalPhoto: the2ndtactical's picture of the clear tube, 1200 px
Photo 0.1 in ± 0.03 in used
the2ndtactical's picture of the clear tube, 1200 px, harvested
Scale: the tube's length (tube_length, 7.25 in), 152 px/in along the axis (channel_rear_from_rear). Read by the chamfer's two ends on the rail's rear lower corner, image (32, 613) and (45, 635) on a 3x crop, projected onto the axis: 15.6 px. Only its length along the tube is read: its height is foreshortened in this view.
The rail's rear end is cut off at its lower edge in every photograph of Guntec's tube that shows it: the clear tube's picture (ca79a7f5e6ca), ABC Sportz's clear set (84ec785b7c42) and its gold set from below (0b3672e01b07). Drawn at 45° (the angle is an assumption: no view on file is square to the rail's side).
The thread's crests, counted along the tube's top line19 ± 1ProvisionalPhoto: the clear tube's picture, its top line on a 4x crop) and eabe3e83f28b (Redcon1's photograph of the red tube, on a 5x crop
Photo 18.5 count ± 1 count used
the clear tube's picture, its top line on a 4x crop) and eabe3e83f28b (Redcon1's photograph of the red tube, on a 5x crop, harvested
Scale: none: a count. Read by crests counted from the body's shoulder to the plain lip at the mouth: 18 to 19 in each
A check of the standard's thread length on Guntec's own tube: std.receiver_extension.thread_length (the reference model's 1.181) at 16 to the inch is 18.9 turns.
What it goes with
By the way it mounts, and the figures each part on file states: a part whose figures say it doesn't fit is left out, and one whose fit can't be checked from what is published is marked. A check is against published figures, not a guarantee.
AR-15 receiver extension thread
- Lower receivers
- Aero Precision M4E1 complete lower, A2 grip and M4 stock, Aero Precision M4E1 Stripped Lower Receiver, Battle Arms Development Workhorse stripped lower, BCM MK2 AR-15 Lower Receiver, Bear Creek Arsenal BC-15 Multi Caliber, Lower Receiver, Black Anodized, Geissele Automatics Super Duty AR-15 Lower Receiver - Stripped Lower, Palmetto State Armory AR-15 "Stealth" Stripped Lower Receiver
- Folding stock adapters
- Law Tactical AR Folding Stock Adapter Gen 3-M, Law Tactical AR Folding Stock Adapter GEN-S, Sylvan Arms SA5 Pro AR15 Folding Stock Adapter (Opens To The Left), Sylvan Arms SA5 Pro AR15 Folding Stock Adapter (Opens To The Right)
Receiver extension (buffer tube)
- Stocks
- B5 Systems Bravo Stock, B5 Systems Enhanced SOPMOD Stock, BCM Stock - Mod 0, Magpul CTR carbine stock, mil-spec, Magpul MOE carbine stock, mil-spec, Magpul MOE SL carbine stock, mil-spec, Mission First Tactical BATTLELINK Minimalist Milspec Stock
- Braces
- SB Tactical SBA3® AR Adjustable Pistol Stabilizing Brace®, SB Tactical SBA4® AR Adjustable Pistol Stabilizing Brace®, SB Tactical SBA5® AR Adjustable Pistol Stabilizing Brace®
Receiver extension end
Receiver extension bore
- Buffers
- Armaspec Stealth™ Recoil Spring - SRS™- AR15 GEN4, C (3.3 oz), Armaspec Stealth™ Recoil Spring - SRS™- AR15 GEN4, H (3.8 oz), Armaspec Stealth™ Recoil Spring - SRS™- AR15 GEN4, H2 (4.7 oz), Armaspec Stealth™ Recoil Spring - SRS™- AR15 GEN4, H3 (5.6 oz), BCM Carbine Buffer, BCM H Carbine Buffer, BCM H2 Carbine Buffer, BCM H3 Carbine Buffer, BCM MK2 Buffer Mod 1 - T0, Geissele Automatics Super 42 Braided Wire Buffer Spring and Buffer Combo, H1, Geissele Automatics Super 42 Braided Wire Buffer Spring and Buffer Combo, H2, Geissele Automatics Super 42 Braided Wire Buffer Spring and Buffer Combo, H3, Guntec USA AR-15 Mil-Spec Car Buffer, Guntec USA AR-15 Stainless Steel Car Buffer, JP Enterprises Silent Captured Spring AR-15 Heavy H2 GEN 2, JP Enterprises Silent Captured Spring AR-15 Heavy H3 GEN 2, JP Enterprises Silent Captured Spring AR-15 Standard GEN 2, KynSHOT RB5000, KynSHOT RB5000HP (High Performance), Panzer Arms AR57 proprietary carbine buffer, VLTOR A5H2 Buffer, 5.3 oz.
- Buffer springs
- BCM Carbine Action Spring, BCM Rifle M16 Action Spring, Guntec USA Upgraded Chrome Silicon Spring, VLTOR A5 Action Spring
Prices on file
Each seller's latest reading of its own page: before tax and shipping, and not a quote. The pages are read again every night.
- The 2nd Tactical $34.99 Anodized Clear Nov 21, 2026, stock not said
- The 2nd Tactical $34.99 Anodized Red Nov 21, 2026, stock not said
- The 2nd Tactical $34.99 Anodized Gold Nov 21, 2026, stock not said
- The 2nd Tactical $34.99 Anodized Blue Nov 21, 2026, stock not said
- The 2nd Tactical $34.99 Anodized Purple Nov 21, 2026, stock not said
- The 2nd Tactical $34.99 Anodized Green Nov 21, 2026, stock not said
- The 2nd Tactical $34.99 Anodized Irish Green Nov 21, 2026, stock not said