End plate
Geissele Automatics Premium Mil-Spec Buffer Tube Assembly, end plate
The plate between the castle nut and the lower receiver in Geissele's Premium Mil-Spec Buffer Tube Assembly: a ring round the receiver extension with a lobe that covers the takedown pin's detent spring, a key in its hole that rides in the extension's slot, and an obround boss on the lobe. Charlie's Custom Clones: "Included in the package is a high-quality, mil-spec castle nut and end plate"; "Includes end plate and castle nut (does not include buffer or spring, which is needed)"; Mile High Shooting and Midwest Optics the same words of the black and the ODG. Not sold alone on any page read, and named by none: the name is the catalog's. A buyer of the DDC at Primary Arms (08-162S, a review of 2025-04-22): "the [in]cluded castle nut and end plate is total trash. My set I found pit marks, poor finish, and poor casting. The endplate looks fresh out the forge no milling just coated": a buyer's word, kept as it was said.

- Weight
- 0.55 oz ± 0.02 oz Provisionalworked out: ({.face_area} - 0.785398163 * {.hole_d} * {.hole_d}) * {.thickness} * {std.density.steel}
- Lowest price
- Sold in the Geissele Automatics Premium AR-15 H1 Buffer Tube Kit With Super 42 - Carbine, not by itself
- Colour
- Manganese phosphate, charcoal
- Drawn as
- modelled
- Maker's page
- charliescustomclones.com
In “22RB .22 LR rifle”, a build on the start page, in place of its BCM Receiver End Plate.
Its figures
Every figure the site draws and checks it by, with where it came from. Open one for each source's reading, and why one is used where they differ.
Thickness0.124 in ± 0.001 in 3.1 mmProvisionalModel: the AR-15 CAD reference set the user supplied, Deterrence Dispensed V11: a third-party model of a mil-spec rifle with a carbine stock
Model 0.124 in ± 0.001 in used
the AR-15 CAD reference set the user supplied, Deterrence Dispensed V11: a third-party model of a mil-spec rifle with a carbine stock, from the site owner
Read by the plate's two faces, planes y 0 and y 0.1240
A mil-spec plate as the reference model has it.
A stamped plate: no page states its thickness, and no photo on file shows it edge on.
End plate top above the tube axis (its ring's radius)0.682 in ± 0.001 in 17.3 mmCorroboratedModel: the AR-15 CAD reference set the user supplied, Deterrence Dispensed V11: a third-party model of a mil-spec rifle with a carbine stock
Model 0.6817 in ± 0.001 in used
the AR-15 CAD reference set the user supplied, Deterrence Dispensed V11: a third-party model of a mil-spec rifle with a carbine stock, from the site owner
Read by the ring's outer cylinder, r 0.6817 (#899)
Photo 0.691 in ± 0.015 in
Primary Arms' 08-162B_03: the black tube with its plate and nut, the plate face on, tilted back: its hole 0.746 as tall as wide, harvested
Scale: across the picture, where the tilt changes nothing: the hole's width taken as a mil-spec plate's (std.receiver_extension.end_plate_hole_d, 1.1902), 335 px, 281.5 px/in. Read by the ring's width across the hole's widest row (row 973, luminance under 150): 389 px, halved
The outline's dark edge takes in a few pixels of shadow either side.
A mil-spec plate, as Charlie's says the assembly's is, and as every photo on file shows it; the one width a photo gives square across agrees within its ±.
End plate lobe bottom below the tube axis1.379 in ± 0.001 in 35 mmProvisionalModel: the AR-15 CAD reference set the user supplied, Deterrence Dispensed V11: a third-party model of a mil-spec rifle with a carbine stock
Model 1.3788 in ± 0.001 in used
the AR-15 CAD reference set the user supplied, Deterrence Dispensed V11: a third-party model of a mil-spec rifle with a carbine stock, from the site owner
Read by the lobe's round end, r 0.4266 about a centre 0.9522 below the axis
The lobe covers the takedown pin's detent spring.
End plate height (its top to its lobe's bottom)2.061 in ± 0.002 in 52.3 mmProvisionalWorked out: {.top_above_axis} + {.bottom_below_axis}
Worked out 2.0605 in ± 0.002 in used
{.top_above_axis} + {.bottom_below_axis}, harvested
End plate, the radius of its lobe's round end0.427 in ± 0.001 in 10.8 mmProvisionalModel: the AR-15 CAD reference set the user supplied, Deterrence Dispensed V11: a third-party model of a mil-spec rifle with a carbine stock
Model 0.4266 in ± 0.001 in used
the AR-15 CAD reference set the user supplied, Deterrence Dispensed V11: a third-party model of a mil-spec rifle with a carbine stock, from the site owner
Read by the lobe's end cylinder, r 0.4266 (#973)
End plate, its lobe's round end's centre below the tube axis0.952 in ± 0.001 in 24.2 mmProvisionalModel: the AR-15 CAD reference set the user supplied, Deterrence Dispensed V11: a third-party model of a mil-spec rifle with a carbine stock
Model 0.9522 in ± 0.001 in used
the AR-15 CAD reference set the user supplied, Deterrence Dispensed V11: a third-party model of a mil-spec rifle with a carbine stock, from the site owner
Read by the lobe's end cylinder's axis (#973)
End plate, its hole for the extension's thread1.19 in ± 0.002 in 30.2 mmProvisionalWorked out: {std.receiver_extension.end_plate_hole_d}
Worked out 1.1902 in ± 0.002 in used
{std.receiver_extension.end_plate_hole_d}, harvested
A mil-spec plate's hole, as the reference model has it: Primary Arms' photo of the plate (40caefb1150b) is scaled by it across.
End plate, its key's width0.125 in ± 0.002 in 3.2 mmProvisionalModel: the AR-15 CAD reference set the user supplied, Deterrence Dispensed V11: a third-party model of a mil-spec rifle with a carbine stock
Model 0.125 in ± 0.002 in used
the AR-15 CAD reference set the user supplied, Deterrence Dispensed V11: a third-party model of a mil-spec rifle with a carbine stock, from the site owner
Read by the key's side planes, x ±0.0625 (#1108, #1162)
The extension's slot it rides in is as wide (std.receiver_extension.key_slot_width).
End plate, its key's tip below the tube axis0.562 in ± 0.002 in 14.3 mmProvisionalModel: the AR-15 CAD reference set the user supplied, Deterrence Dispensed V11: a third-party model of a mil-spec rifle with a carbine stock
Model 0.5619 in ± 0.002 in used
the AR-15 CAD reference set the user supplied, Deterrence Dispensed V11: a third-party model of a mil-spec rifle with a carbine stock, from the site owner
Read by the key's tip plane, z 0.5619 (#1135)
0.012 below the extension's slot floor (std.receiver_extension.key_slot_floor, 0.55): the key stands clear of it.
End plate, the V either side of its key: its floor below the tube axis0.657 in ± 0.002 in 16.7 mmProvisionalModel: the AR-15 CAD reference set the user supplied, Deterrence Dispensed V11: a third-party model of a mil-spec rifle with a carbine stock
Model 0.6575 in ± 0.002 in used
the AR-15 CAD reference set the user supplied, Deterrence Dispensed V11: a third-party model of a mil-spec rifle with a carbine stock, from the site owner
Read by the two sloped planes' lower ends, z 0.6575 (#1054, #1216), where 0.031 in rounds turn them into the key's sides
End plate, the V either side of its key: where its sloped sides end, out from the middle0.112 in ± 0.002 in 2.8 mmProvisionalModel: the AR-15 CAD reference set the user supplied, Deterrence Dispensed V11: a third-party model of a mil-spec rifle with a carbine stock
Model 0.1119 in ± 0.002 in used
the AR-15 CAD reference set the user supplied, Deterrence Dispensed V11: a third-party model of a mil-spec rifle with a carbine stock, from the site owner
Read by the sloped planes' inner ends, x ±0.1119 (#1054, #1216)
End plate, the V either side of its key: where it leaves the hole's circle, out from the middle0.354 in ± 0.002 in 9 mmProvisionalModel: the AR-15 CAD reference set the user supplied, Deterrence Dispensed V11: a third-party model of a mil-spec rifle with a carbine stock
Model 0.354 in ± 0.002 in used
the AR-15 CAD reference set the user supplied, Deterrence Dispensed V11: a third-party model of a mil-spec rifle with a carbine stock, from the site owner
Read by the hole's cylinder ends at x ±0.3540, z 0.4784 (#1007), where the sloped planes begin
End plate, the round at the bottom of the V either side of its key, where it turns into the key's side0.031 in ± 0.001 in 0.8 mmProvisionalModel: the AR-15 CAD reference set the user supplied, Deterrence Dispensed V11: a third-party model of a mil-spec rifle with a carbine stock
Model 0.031 in ± 0.001 in used
the AR-15 CAD reference set the user supplied, Deterrence Dispensed V11: a third-party model of a mil-spec rifle with a carbine stock, from the site owner
Read by two cylinders r 0.031 at x ±0.0935, z 0.6326 (#1081, #1189)
End plate, the break on its edges0.012 in ± 0.006 in 0.3 mmProvisionalWorked out: An assumption for the drawing, not a reading: no view on file shows its edges in profile; the reference model's are sharp. A stamped plate's edges are broken a little, and a sharp edge reads as a line of light in the app.
Worked out 0.012 in ± 0.006 in used
An assumption for the drawing, not a reading: no view on file shows its edges in profile; the reference model's are sharp. A stamped plate's edges are broken a little, and a sharp edge reads as a line of light in the app., harvested
End plate, its boss side to side0.496 in ± 0.002 in 12.6 mmProvisionalModel: the AR-15 CAD reference set the user supplied, Deterrence Dispensed V11: a third-party model of a mil-spec rifle with a carbine stock
Model 0.496 in ± 0.002 in used
the AR-15 CAD reference set the user supplied, Deterrence Dispensed V11: a third-party model of a mil-spec rifle with a carbine stock, from the site owner
Read by an obround: two r 0.1875 ends at x ±0.0605
End plate, its boss top to bottom0.375 in ± 0.002 in 9.5 mmProvisionalModel: the AR-15 CAD reference set the user supplied, Deterrence Dispensed V11: a third-party model of a mil-spec rifle with a carbine stock
Model 0.375 in ± 0.002 in used
the AR-15 CAD reference set the user supplied, Deterrence Dispensed V11: a third-party model of a mil-spec rifle with a carbine stock, from the site owner
Read by the obround's two ends' diameter
End plate, its boss's middle below the tube's axis0.997 in ± 0.002 in 25.3 mmProvisionalModel: the AR-15 CAD reference set the user supplied, Deterrence Dispensed V11: a third-party model of a mil-spec rifle with a carbine stock
Model 0.9974 in ± 0.002 in used
the AR-15 CAD reference set the user supplied, Deterrence Dispensed V11: a third-party model of a mil-spec rifle with a carbine stock, from the site owner
Read by the obround's centre
End plate, how far its boss stands out of its front face0.065 in ± 0.002 in 1.6 mmProvisionalModel: the AR-15 CAD reference set the user supplied, Deterrence Dispensed V11: a third-party model of a mil-spec rifle with a carbine stock
Model 0.0645 in ± 0.002 in used
the AR-15 CAD reference set the user supplied, Deterrence Dispensed V11: a third-party model of a mil-spec rifle with a carbine stock, from the site owner
Read by the boss's face, plane y 0.1885 of a plate 0.1240 thick
No photo on file shows the boss in profile.
End plate, the dimple in its rear face behind the boss0.063 in ± 0.002 in 1.6 mmProvisionalModel: the AR-15 CAD reference set the user supplied, Deterrence Dispensed V11: a third-party model of a mil-spec rifle with a carbine stock
Model 0.063 in ± 0.002 in used
the AR-15 CAD reference set the user supplied, Deterrence Dispensed V11: a third-party model of a mil-spec rifle with a carbine stock, from the site owner
Read by plane y 0.0630; the dimple is the boss's outline 0.005 larger all round
No photo on file shows the dimple in profile.
End plate, how much larger all round its dimple is than its boss0.005 in ± 0.001 in 0.1 mmProvisionalModel: the AR-15 CAD reference set the user supplied, Deterrence Dispensed V11: a third-party model of a mil-spec rifle with a carbine stock
Model 0.005 in ± 0.001 in used
the AR-15 CAD reference set the user supplied, Deterrence Dispensed V11: a third-party model of a mil-spec rifle with a carbine stock, from the site owner
Read by the dimple's ends r 0.1925 against the boss's r 0.1875 (#1433, #1223)
End plate, its lobe's straight sides: how far each leans in from upright13.5° ± 0.05°ProvisionalModel: the AR-15 CAD reference set the user supplied, Deterrence Dispensed V11: a third-party model of a mil-spec rifle with a carbine stock
Model 13.5 deg ± 0.05 deg used
the AR-15 CAD reference set the user supplied, Deterrence Dispensed V11: a third-party model of a mil-spec rifle with a carbine stock, from the site owner
Read by the side planes' normals (#946, #1000: 0.972, 0.233), whose lean is atan(0.233 / 0.972)
Each side is tangent to the lobe's round end and meets the ring's circle at a corner (it isn't tangent to the ring).
End plate, where each straight side meets the ring: its angle below the level of the tube axis31.3° ± 0.05°ProvisionalModel: the AR-15 CAD reference set the user supplied, Deterrence Dispensed V11: a third-party model of a mil-spec rifle with a carbine stock
Model 31.33 deg ± 0.05 deg used
the AR-15 CAD reference set the user supplied, Deterrence Dispensed V11: a third-party model of a mil-spec rifle with a carbine stock, from the site owner
Read by the side planes' upper ends, x ±0.5823, 0.3545 below the axis, on the ring's r 0.6817: atan(0.3545 / 0.5823)
End plate, the area its outline holds (the hole not taken out)2.087 in ± 0.004 in 53 mmProvisionalWorked out: {.top_above_axis} * {.top_above_axis} * (180 + 2 * {.corner_angle}) * 3.14159265 / 360 + {.lobe_radius} * {.lobe_radius} * (180 - 2 * {.side_angle}) * 3.14159265 / 360 + {.lobe_radius} * {.lobe_centre_below_axis} * cos({.side_angle}) + {.top_above_axis} * cos({.corner_angle}) * ({.lobe_centre_below_axis} + {.lobe_radius} * sin({.side_angle})) - {.lobe_radius} * {.top_above_axis} * cos({.side_angle}) * sin({.corner_angle})
Worked out 2.0875 in ± 0.004 in used
{.top_above_axis} * {.top_above_axis} * (180 + 2 * {.corner_angle}) * 3.14159265 / 360 + {.lobe_radius} * {.lobe_radius} * (180 - 2 * {.side_angle}) * 3.14159265 / 360 + {.lobe_radius} * {.lobe_centre_below_axis} * cos({.side_angle}) + {.top_above_axis} * cos({.corner_angle}) * ({.lobe_centre_below_axis} + {.lobe_radius} * sin({.side_angle})) - {.lobe_radius} * {.top_above_axis} * cos({.side_angle}) * sin({.corner_angle}), harvested
In square inches, held as a length's number: the ring's arc above the two corners and the lobe's round end below its tangent points, each as a sector about its own centre, and between them the four triangles from the axis to the corners, the tangent points and the lobe's centre.
What it goes with
By the way it mounts, and the figures each part on file states: a part whose figures say it doesn't fit is left out, and one whose fit can't be checked from what is published is marked. A check is against published figures, not a guarantee.