Castle nut
Guntec USA AR-15 Heavy Duty Wide Castle Nut For Car/M4 Buffer Tube
Guntec's wide castle nut: the nut on the receiver extension's thread that is turned down onto the end plate and locks the extension to the lower receiver, four notches in its rear face taking the wrench, and notches in its front face's edge where it is staked. Guntec: "US Made Steel", "Gen 2", "Fits Mil-spec/Commercial Buffer Tubes", "Extra Wide For Stronger, More Durable Hold", "Color: Black", "Material: Steel", "Finish: Matte", "Product Height 0.375"", "Product Width 1.3125"", "Product Length 1.3125"", "Product Weight 0.6 oz"; UPC 714569647827. The castle nut in Guntec's buffer tube set, by the user who owns one.

- Weight
- 0.6 oz Confirmedpublished: Guntec USA, AR-15 Heavy Duty Wide Castle Nut For Car/M4 Buffer Tube, CASTLE-HD, its Additional Information; the page as the user saved it, a copy on file, the maker, read Oct 20, 2026
- Lowest price
- $8.95 at Guntec USA, read Oct 20, 2026
- Maker's number
- CASTLE-HD
- Colour
- Phosphate, black
- Drawn as
- modelled
- Maker's page
- guntecusa.com
In “22RB .22 LR rifle”, a build on the start page, in place of its BCM Receiver Extension Nut (Castle Nut).
Its figures
Every figure the site draws and checks it by, with where it came from. Open one for each source's reading, and why one is used where they differ.
Outside diameter1.313 in ± 0.031 in 33.3 mmConflictPublished: Guntec USA, AR-15 Heavy Duty Wide Castle Nut For Car/M4 Buffer Tube, CASTLE-HD, its Additional Information; the page as the user saved it, a copy on file, the maker, read Oct 20, 2026
Published “Product Width 1.3125" Product Length 1.3125"” used
Guntec USA, AR-15 Heavy Duty Wide Castle Nut For Car/M4 Buffer Tube, CASTLE-HD, its Additional Information; the page as the user saved it, a copy on file, the maker, read Oct 20, 2026 the page, from the site owner
In sixteenths of an inch (1 5/16), as Guntec's sizes are on its pages (its tube's too): taken to its nearest sixteenth, a thirty-second either way. Width and length are the same figure: its diameter.
Photo 1.352 in ± 0.03 in
Guntec: its purple set assembled, MILTUBESET-PURPLE_Rev, 900 px; from the user's saved page of the purple tube, 2026-10-19, harvested
Scale: the tube's own outside diameter just behind the nut, where it is the tube alone, taken as std.receiver_extension.milspec_od (1.148): 82.5 px, 71.8 px/in across the axis. Read by the silhouette's width across the tube's axis where the nut stands (along the axis 64 to 76 px from the reference column), in the frame of the tube's top and bottom edges: 1.351 to 1.363, the median. A cylinder's silhouette is its diameter whatever the lens's yaw
The set's nut in Guntec's own picture of its set: a notch shows in its front face's edge, as on this one.
Photo 1.386 in ± 0.03 in
Guntec: its clear set assembled, MILTUBESET-CLEAR, 900 px, harvested
Scale: the tube's own outside diameter, as the purple's: 84.3 px, 73.4 px/in. Read by as the purple's: 1.376 to 1.398 along the nut, the median
The clear tube is a pale silhouette on white, its top edge a highlight: read at a tight threshold it may still lose a pixel at an edge, which makes the tube read thin and the nut large. A notch shows in the nut's front face's edge at its upper right (columns 474 to 478, rows 422 to 428).
Guntec's own figure for this nut. Its own pictures of the set's nut read it larger across the tube (the purple within the ±, the clear beyond it, a conflict said); its weight, 0.6 oz, sits between what 1.3125 and 1.35 make of it.
guntec and guntec-clear differ by 0.073 in beyond what each states it is good to.
Thickness0.375 in ± 0.031 in 9.5 mmConfirmedPublished: Guntec USA, AR-15 Heavy Duty Wide Castle Nut For Car/M4 Buffer Tube, CASTLE-HD, its Additional Information; the page as the user saved it, a copy on file, the maker, read Oct 20, 2026
Published “Product Height 0.375"” used
Guntec USA, AR-15 Heavy Duty Wide Castle Nut For Car/M4 Buffer Tube, CASTLE-HD, its Additional Information; the page as the user saved it, a copy on file, the maker, read Oct 20, 2026 the page, from the site owner
In sixteenths (6/16). Its height lying on its face: its thickness along the tube. "Extra Wide For Stronger, More Durable Hold" is this against Guntec's CASTLE nut, 0.29 in.
Photo 0.405 in ± 0.03 in
Guntec's CASTLE-HD-1, 500 px; lying on its front face, seen from above, harvested
Scale: its own thread on the far inner wall: grooves 13.5 px apart down the picture (rows 128, 141, 154, 168, 181, 195.5 on column 260), each a 1/16 in pitch along the axis; a ratio on one wall at one depth. Read by the far inner wall from the rear face's inner edge (row 119, its 9.4 px band below the outer edge at 109.5) to where the bore opens on its front face (row 206.5): 87.5 px, 6.5 pitches
Its near side, read through its diameter (rows 311 to 390, over the cosine, at 280.4 px/in), is 0.337: a lens this close draws the two sides at scales a few percent apart, and the two readings lie either side of Guntec's figure.
Guntec's own figure; its picture's far wall and near side read it 0.03 long and 0.04 short, either side of it.
Notches on its rear face4ProvisionalPhoto: Guntec's CASTLE-HD-1, 500 px; the rear face whole, seen from above
Photo 4 count used
Guntec's CASTLE-HD-1, 500 px; the rear face whole, seen from above, harvested
Scale: none (a count). Read by the gaps in the rear face's rim, counted all the way round the ellipse: front left and front right (45 degrees either side of the lens's side), back left and back right
Wrench notch width0.12 in ± 0.03 in 3 mmProvisionalPhoto: Guntec's CASTLE-HD-1, 500 px
Photo 0.12 in ± 0.03 in used
Guntec's CASTLE-HD-1, 500 px, harvested
Scale: its outside diameter (.od) across the picture: 280.4 px/in. Read by the front right notch at 45 degrees round: the backdrop seen through it 16 px across (rows 283 to 289, columns 366 to 381). A slot seen at that angle shows its width times the cosine less its wall's depth times the sine, the wall from the rear face's inner edge (1.146 in across the ellipse) to the outside: (0.057 x 0.707) + 0.083
Wrench notch depth (into the rear face)0.078 in ± 0.02 in 2 mmProvisionalPhoto: Guntec's CASTLE-HD-1, 500 px
Photo 0.078 in ± 0.02 in used
Guntec's CASTLE-HD-1, 500 px, harvested
Scale: 280.4 px/in across; along the axis times the cosine 0.837. Read by the front right notch at column 373: the rear face's outer edge there (row 281.8, on its ellipse) to its floor's outer edge (row 300, the floor's lit band from 293 below the backdrop seen through the notch): 18 px
Notches in its front face's outer edge3ProvisionalModel: the AR-15 CAD reference set the user supplied, Deterrence Dispensed V11: a third-party model of a mil-spec rifle with a carbine stock
Model 3 count used
the AR-15 CAD reference set the user supplied, Deterrence Dispensed V11: a third-party model of a mil-spec rifle with a carbine stock, from the site owner
Read by three notches 120 degrees apart, counted in the face list (planes #20197, #20323 and their like)
Guntec's one picture shows the front face's near half: one notch there, at the front, midway between the two near wrench notches, and none at either side, as three at 120 degrees would have it and four at 90 wouldn't. The other two aren't in view: the count is the mil-spec nut's, which the picture allows.
Front face notch, width0.082 in ± 0.01 in 2.1 mmCorroboratedPhoto: Guntec's CASTLE-HD-1, 500 px
Photo 0.082 in ± 0.01 in used
Guntec's CASTLE-HD-1, 500 px, harvested
Scale: 280.4 px/in across. Read by the silhouette's bottom raised from row 390 to 383 between columns 224 and 247 (23 px), at the front, square to the lens
Model 0.09 in ± 0.002 in
the AR-15 CAD reference set the user supplied, Deterrence Dispensed V11: a third-party model of a mil-spec rifle with a carbine stock, from the site owner
Read by a notch's two side planes, ±0.0450
Guntec's nut's own; the mil-spec nut's agrees within its ±.
Front face notch, depth into the front face0.03 in ± 0.01 in 0.8 mmConflictPhoto: Guntec's CASTLE-HD-1, 500 px
Photo 0.03 in ± 0.01 in used
Guntec's CASTLE-HD-1, 500 px, harvested
Scale: 280.4 px/in; along the axis times the cosine 0.837. Read by the silhouette's bottom raised 7 px at the notch: its ceiling's outer edge
Model 0.082 in ± 0.002 in
the AR-15 CAD reference set the user supplied, Deterrence Dispensed V11: a third-party model of a mil-spec rifle with a carbine stock, from the site owner
Read by a notch's floor
The mil-spec nut's notch is deeper than Guntec's reads: another nut.
Guntec's nut's own, read where the notch makes the silhouette; the mil-spec nut's is another nut's, a conflict said.
photo and model differ by 0.052 in beyond what each states it is good to.
Front face notch, how far in from the outside it is cut0.075 in ± 0.002 in 1.9 mmProvisionalModel: the AR-15 CAD reference set the user supplied, Deterrence Dispensed V11: a third-party model of a mil-spec rifle with a carbine stock
Model 0.075 in ± 0.002 in used
the AR-15 CAD reference set the user supplied, Deterrence Dispensed V11: a third-party model of a mil-spec rifle with a carbine stock, from the site owner
Read by the notch's inner wall, a cylinder r 0.6065 of an outside r 0.6815
Guntec's picture says only that it is at least 0.046 in (the front face's edge further in would otherwise make the silhouette there). The model bores the nut at the thread's crests (0.066 in of wall here; the real nut's thread stands 0.036 further in), so drawn to 0.075 the notch opens into that bore: a shallow slot through the front face's edge.
Front face notch: how far round the axis from the nearest wrench notch45° ± 5°ProvisionalPhoto: Guntec's CASTLE-HD-1, 500 px
Photo 45 deg ± 5 deg used
Guntec's CASTLE-HD-1, 500 px, harvested
Scale: none (angles round the ellipse). Read by the front notch's middle (column 235.5, 2.5 degrees round from the lens's side) and the two near wrench notches (columns 140 and 373, at -45 and +45)
The break on its edges0.012 in ± 0.006 in 0.3 mmProvisionalWorked out: An assumption for the drawing, not a reading: Guntec's picture is too small to show its edges' rounding (a pixel is 0.0036 in).
Worked out 0.012 in ± 0.006 in used
An assumption for the drawing, not a reading: Guntec's picture is too small to show its edges' rounding (a pixel is 0.0036 in)., harvested
What it goes with
By the way it mounts, and the figures each part on file states: a part whose figures say it doesn't fit is left out, and one whose fit can't be checked from what is published is marked. A check is against published figures, not a guarantee.
End plate, where the castle nut bears
Prices on file
Each seller's latest reading of its own page: before tax and shipping, and not a quote. The pages are read again every night.
- Guntec USA $8.95 Oct 20, 2026, in stock that day