End plate
BCM QD End Plate
A receiver end plate with a sling socket: the plate between the castle nut and the lower receiver, its lobe carrying a socket for a quick-detach swivel under the receiver extension. BCM: "BCM® Receiver End Plate with socket for Quick Disconnect (QD) swivel." "Machined from steel, and easily accommodates staking." T.REX ARMS, which sells it: "Accepts standard QD push-button sling swivels." "Install with the Star Logo out."

- Weight
- 0.54 oz ± 0.1 oz Conflictworked out: (({.face_mean_width} * {.height} - 0.785398163 * {std.receiver_extension.end_plate_hole_d} * {std.receiver_extension.end_plate_hole_d}) * {.thickness} + 0.785398163 * ({.socket_od} * {.socket_od} - {.socket_bore_d} * {.socket_bore_d}) * ({.socket_proud_rear} + {.socket_proud_front}) - 0.785398163 * {.socket_bore_d} * {.socket_bore_d} * {.thickness}) * {std.density.steel}Its sources span 0.44 oz to 1.11 oz.
- Lowest price
- $16.95 at BCM, read Nov 21, 2026
- Maker's number
- BCM-EPM4-QD
- Colour
- Manganese phosphate, dark charcoal
- Drawn as
- modelled
- Maker's page
- bravocompanyusa.com
In “Drop-in 16 in, Stealth Gray on BCM's MK2 lower”, a build on the start page, as it is.
Its figures
Every figure the site draws and checks it by, with where it came from. Open one for each source's reading, and why one is used where they differ.
End plate height (its top to its lobe's bottom)2.023 in ± 0.02 in 51.4 mmProvisionalPhoto: Primary Arms’ BCM-EPM4-QD_02, 2000 x 1333: the plate straight face-on on white, star side, the socket’s bore open to the white behind
Photo 2.023 in ± 0.02 in used
Primary Arms’ BCM-EPM4-QD_02, 2000 x 1333: the plate straight face-on on white, star side, the socket’s bore open to the white behind, harvested
Scale: the ring's hole taken as a mil-spec plate's (std.receiver_extension.end_plate_hole_d, 1.1902 in): 565 px across and 572 px high beside its key (threshold 200, holes of the largest piece), read as 570 ± 5 px, so 478.9 px/in ± 0.9%. Checked on what else it has to fit: at this scale the socket's opening is 0.370 in (a push-button swivel's stud is three eighths), and the socket is 0.979 in below the ring's centre, where the reference model's plate has its boss over the detent spring at 0.997. Read by the outline's height, 969 px (luminance < 200, largest piece, holes filled)
A mil-spec plate is 2.06 in the reference model; BCM's plain plate 2.01 as the ledger has it.
What the face-on photo's outline (profiles.face) is scaled to.
End plate top above the tube axis0.665 in ± 0.012 in 16.9 mmProvisionalPhoto: Primary Arms’ BCM-EPM4-QD_02, 2000 x 1333: the plate straight face-on on white, star side, the socket’s bore open to the white behind
Photo 0.665 in ± 0.012 in used
Primary Arms’ BCM-EPM4-QD_02, 2000 x 1333: the plate straight face-on on white, star side, the socket’s bore open to the white behind, harvested
Scale: the ring's hole taken as a mil-spec plate's (std.receiver_extension.end_plate_hole_d, 1.1902 in): 565 px across and 572 px high beside its key (threshold 200, holes of the largest piece), read as 570 ± 5 px, so 478.9 px/in ± 0.9%. Checked on what else it has to fit: at this scale the socket's opening is 0.370 in (a push-button swivel's stud is three eighths), and the socket is 0.979 in below the ring's centre, where the reference model's plate has its boss over the detent spring at 0.997. Read by the outline's top row (187) above the ring's hole's centre (row 505.5: the hole's centroid, a pixel lower for the key that stands in its bottom)
End plate width (across its ring)1.334 in ± 0.015 in 33.9 mmProvisionalPhoto: Primary Arms’ BCM-EPM4-QD_02, 2000 x 1333: the plate straight face-on on white, star side, the socket’s bore open to the white behind
Photo 1.334 in ± 0.015 in used
Primary Arms’ BCM-EPM4-QD_02, 2000 x 1333: the plate straight face-on on white, star side, the socket’s bore open to the white behind, harvested
Scale: the ring's hole taken as a mil-spec plate's (std.receiver_extension.end_plate_hole_d, 1.1902 in): 565 px across and 572 px high beside its key (threshold 200, holes of the largest piece), read as 570 ± 5 px, so 478.9 px/in ± 0.9%. Checked on what else it has to fit: at this scale the socket's opening is 0.370 in (a push-button swivel's stud is three eighths), and the socket is 0.979 in below the ring's centre, where the reference model's plate has its boss over the detent spring at 0.997. Read by the outline's width, 639 px
1.363 in the reference model; 1.32 for BCM's plain plate.
End plate thickness0.115 in ± 0.025 in 2.9 mmProvisionalPhoto: BCM’s BCM-EPM4-QD-4, 1200 x 800: the plate nearly edge-on on white, turned about ten degrees, the ring a narrow ellipse
Photo 0.115 in ± 0.025 in used
BCM’s BCM-EPM4-QD-4, 1200 x 800: the plate nearly edge-on on white, turned about ten degrees, the ring a narrow ellipse, harvested
Scale: the plate's own height in the same view, 459 px, taken as the face-on photo's (.height): 227 px/in at the plate's middle. A close photo: the near side of the ring reads a quarter larger than the far side, so what is read on one side only carries that. Read by the ring's two sides across the photo at its middle height: the near one's edge 30 px, the far one's inner wall and face 24 px, each less what the face shows at ten degrees (3 px), and halved between the two for the lens's nearness
A mil-spec plate is 0.124 in the reference model, inside this ±.
QD socket, its centre below the tube axis0.979 in ± 0.012 in 24.9 mmProvisionalPhoto: Primary Arms’ BCM-EPM4-QD_02, 2000 x 1333: the plate straight face-on on white, star side, the socket’s bore open to the white behind
Photo 0.979 in ± 0.012 in used
Primary Arms’ BCM-EPM4-QD_02, 2000 x 1333: the plate straight face-on on white, star side, the socket’s bore open to the white behind, harvested
Scale: the ring's hole taken as a mil-spec plate's (std.receiver_extension.end_plate_hole_d, 1.1902 in): 565 px across and 572 px high beside its key (threshold 200, holes of the largest piece), read as 570 ± 5 px, so 478.9 px/in ± 0.9%. Checked on what else it has to fit: at this scale the socket's opening is 0.370 in (a push-button swivel's stud is three eighths), and the socket is 0.979 in below the ring's centre, where the reference model's plate has its boss over the detent spring at 0.997. Read by the socket's opening's centre (row 973.2) below the ring's hole's centre
QD socket, its bore0.37 in ± 0.01 in 9.4 mmProvisionalPhoto: Primary Arms’ BCM-EPM4-QD_02, 2000 x 1333: the plate straight face-on on white, star side, the socket’s bore open to the white behind
Photo 0.37 in ± 0.01 in used
Primary Arms’ BCM-EPM4-QD_02, 2000 x 1333: the plate straight face-on on white, star side, the socket’s bore open to the white behind, harvested
Scale: the ring's hole taken as a mil-spec plate's (std.receiver_extension.end_plate_hole_d, 1.1902 in): 565 px across and 572 px high beside its key (threshold 200, holes of the largest piece), read as 570 ± 5 px, so 478.9 px/in ± 0.9%. Checked on what else it has to fit: at this scale the socket's opening is 0.370 in (a push-button swivel's stud is three eighths), and the socket is 0.979 in below the ring's centre, where the reference model's plate has its boss over the detent spring at 0.997. Read by the opening seen through the socket, 180 px wide and 174 high (its area's equal circle 177 px)
What shows through a socket from in front is its narrowest. T.REX ARMS: "Accepts standard QD push-button sling swivels." No page states the bore.
QD socket, its collar's outside diameter0.547 in ± 0.02 in 13.9 mmProvisionalPhoto: Primary Arms’ BCM-EPM4-QD_02, 2000 x 1333: the plate straight face-on on white, star side, the socket’s bore open to the white behind
Photo 0.547 in ± 0.02 in used
Primary Arms’ BCM-EPM4-QD_02, 2000 x 1333: the plate straight face-on on white, star side, the socket’s bore open to the white behind, harvested
Scale: the ring's hole taken as a mil-spec plate's (std.receiver_extension.end_plate_hole_d, 1.1902 in): 565 px across and 572 px high beside its key (threshold 200, holes of the largest piece), read as 570 ± 5 px, so 478.9 px/in ± 0.9%. Checked on what else it has to fit: at this scale the socket's opening is 0.370 in (a push-button swivel's stud is three eighths), and the socket is 0.979 in below the ring's centre, where the reference model's plate has its boss over the detent spring at 0.997. Read by the collar's face about the socket's centre: mean brightness by radius steps down at 131 px (the collar's face 65 of 255, the plate's 48)
QD socket, how far its collar stands out of the star face (the rear, as BCM says to install it)0.12 in ± 0.03 in 3 mmProvisionalPhoto: BCM’s BCM-EPM4-QD-4, 1200 x 800: the plate nearly edge-on on white, turned about ten degrees, the ring a narrow ellipse
Photo 0.12 in ± 0.03 in used
BCM’s BCM-EPM4-QD-4, 1200 x 800: the plate nearly edge-on on white, turned about ten degrees, the ring a narrow ellipse, harvested
Scale: the plate's own height in the same view, 459 px, taken as the face-on photo's (.height): 227 px/in at the plate's middle. A close photo: the near side of the ring reads a quarter larger than the far side, so what is read on one side only carries that. Read by the collar on the face turned to the camera, 52 px across the photo at its middle, less its own end face seen at ten degrees (its diameter's 0.55 in times the sine: 25 px)
Which face: BCM's oblique (0c02d8b792b8) has the long collar, knurled where it is pressed into the plate, on the star's side; T.REX ARMS: "Install with the Star Logo out."
QD socket, how far it stands out of the front face (into the receiver's rear face, where a plain plate has its boss)0.1 in ± 0.03 in 2.5 mmProvisionalPhoto: BCM’s BCM-EPM4-QD-4, 1200 x 800: the plate nearly edge-on on white, turned about ten degrees, the ring a narrow ellipse
Photo 0.1 in ± 0.03 in used
BCM’s BCM-EPM4-QD-4, 1200 x 800: the plate nearly edge-on on white, turned about ten degrees, the ring a narrow ellipse, harvested
Scale: the plate's own height in the same view, 459 px, taken as the face-on photo's (.height): 227 px/in at the plate's middle. A close photo: the near side of the ring reads a quarter larger than the far side, so what is read on one side only carries that. Read by what stands off the face turned away from the camera, 22 px across the photo (its end face doesn't show)
A mil-spec plate's boss stands 0.0645 out in the reference model. Its diameter on this side isn't read: drawn as the collar's.
Its face's area over its height (the width of a rectangle as tall with the same area)0.986 in ± 0.02 in 25 mmProvisionalPhoto: Primary Arms’ BCM-EPM4-QD_02, 2000 x 1333: the plate straight face-on on white
Photo 0.986 in ± 0.02 in used
Primary Arms’ BCM-EPM4-QD_02, 2000 x 1333: the plate straight face-on on white, harvested
Scale: the traced outline's own scale (profiles.face: its height, .height). Read by the traced outline's area (1.995 square inches, the hole and the socket filled) over its height (2.023 in)
A way to hold the outline's area as a length: what the plate's weight is worked out from.
What it goes with
By the way it mounts, and the figures each part on file states: a part whose figures say it doesn't fit is left out, and one whose fit can't be checked from what is published is marked. A check is against published figures, not a guarantee.
Receiver extension end
End plate, where the castle nut bears
Prices on file
Each seller's latest reading of its own page: before tax and shipping, and not a quote. The pages are read again every night.
- BCM $16.95 Nov 21, 2026, in stock that day
- Primary Arms $16.95 Nov 21, 2026, in stock that day
- KYGUNCO $16.95 Nov 21, 2026, in stock that day
- T.REX ARMS $18.00 Nov 21, 2026, in stock that day
- AR15Discounts $16.95 Nov 21, 2026, out of stock that day