Castle nut
Guntec USA AR-15 Castle Nut for CAR/M4 Buffer Tube
The nut on the receiver extension's thread that is turned down onto the end plate and locks the extension to the lower receiver, its four notches taking the wrench, with a radial hole in its side. Guntec, as Cheaper Than Dirt carries its words: "Guntec has an AR-15 Castle Nut for Car/M4 Buffer Tube to provide more strength and durability for your AR. This castle nut is made with quality at an economical price. Made in the USA." "Fits Mil-spec and Commercial Buffer Tubes", "US Made In Scottsdale, Arizona", "Steel", "Matte Black". Thinner than a mil-spec nut: 0.29 in by its own thread on a photo, against the reference model's 0.3765 (Guntec's heavy duty nut, its "Extra Wide" one, is 0.375).

- Weight
- 0.43 oz ± 0.04 oz Provisionalworked out: (0.785398163 * ({.od} * {.od} - {std.receiver_extension.thread_major_d} * {std.receiver_extension.thread_major_d}) * {.thickness} - {.notches} * {.notch_width} * {.notch_depth} * ({.od} - {std.receiver_extension.thread_major_d}) / 2 - 0.785398163 * {.hole_d} * {.hole_d} * ({.od} - {std.receiver_extension.thread_major_d}) / 2) * {std.density.steel}
- Lowest price
- $7.89 at Cheaper Than Dirt, read Nov 21, 2026
- Maker's number
- CASTLE
- Colour
- Phosphate, black
- Drawn as
- modelled
- Maker's page
- cheaperthandirt.com
In “22RB .22 LR rifle”, a build on the start page, in place of its BCM Receiver Extension Nut (Castle Nut).
Its figures
Every figure the site draws and checks it by, with where it came from. Open one for each source's reading, and why one is used where they differ.
Outside diameter1.355 in ± 0.04 in 34.4 mmCorroboratedPhoto: Cheaper Than Dirt: Guntec's CASTLE nut alone, 1000 x 1000; lying on its front face, seen from above at an angle
Photo 1.355 in ± 0.04 in used
Cheaper Than Dirt: Guntec's CASTLE nut alone, 1000 x 1000; lying on its front face, seen from above at an angle, harvested
Scale: its own thread: four grooves on the far inner wall at rows 234, 271, 308 and 345, 37 px apart, a 1/16 in pitch along the axis seen at the cosine 0.854: 693 px/in there. Read by its width across the picture, 958 px (rows 440 to 520), at that scale is 1.38; the far wall stands about as far behind the nut's middle as its radius, which at the lens's distance (the near rim reads larger than the far by the ellipse's halves) puts the middle's scale about 2% larger
Model 1.363 in ± 0.001 in
the AR-15 CAD reference set the user supplied, Deterrence Dispensed V11: a third-party model of a mil-spec rifle with a carbine stock, from the site owner
Read by one cylinder, r 0.6815
A mil-spec nut as the reference model has it, another than Guntec's (it is 0.3765 thick: thickness).
Its own thread as the scale, on the one large photograph of this nut; the reference model's mil-spec nut is 0.008 larger, inside the ±. (Guntec's own pictures of its sets, read for this figure until 2026-10-20, show the heavy duty nut.)
Thickness0.294 in ± 0.02 in 7.5 mmConflictPhoto: Cheaper Than Dirt: Guntec's CASTLE nut alone, 1000 x 1000; lying on its front face, seen from above at an angle
Photo 0.294 in ± 0.02 in used
Cheaper Than Dirt: Guntec's CASTLE nut alone, 1000 x 1000; lying on its front face, seen from above at an angle, harvested
Scale: its own thread on the far inner wall: grooves 37 px apart down the picture, each a 1/16 in pitch along the axis; a ratio on one wall at one depth, needing no other scale. Read by the far inner wall from the rear face's inner edge (row 196, the end of the rear face's 30 px band below its outer edge at 166) to where the bore opens on its front face (row 371): 175 px, 4.7 pitches. Counted on columns 420 to 580: the grooves at 231 to 234, 268 to 272, 306 to 309, 342 to 346 on each
Photo 0.276 in ± 0.03 in
Cheaper Than Dirt: Guntec's CASTLE nut alone, 1000 x 1000, harvested
Scale: its outside diameter (.od) across the picture, 958 px; the lens's angle from the rear face's ellipse (outer edge at rows 166 and 664 on column 500: 498 px over 958, sine 0.520, cosine 0.854). Read by the near side, column 500: from the rear face's outer edge (row 664, where its lit band rounds over into the side) to the silhouette's bottom (row 831, the front face's outer edge): 167 px, over the cosine, at 708.6 px/in
On the near side, where a lens close by draws larger than at the middle: if anything this reads long, and it reads 0.018 under the thread's count.
Photo 0.282 in ± 0.03 in
Redcon1 Tactical: Guntec's chrome set laid out, 1215 x 1035; this nut on its front face beside the set's tube, seen from above. The same photograph of the nut as its red set's picture, 2ab5455bdba9, at 1.5 times the size, harvested
Scale: the nut's width across the picture, 196.5 px (rows 710 to 750), as .od: 145.3 px/in; the angle from its rear face's ellipse (outer edge at rows 652.5 and 796 on column 393: 143.5 over 196.5, sine 0.730, cosine 0.683). Read by the near side, column 393: the rear face's inner edge at row 780.5, its band 9 px (the wall, (od - thread) / 2, at the sine), the silhouette's bottom at 817.5: 28 px over the cosine. Its far inner wall agrees: 29.5 px from the rear face's band to where the bore opens (row 691), grooves 6.5 px apart, 4.5 pitches
Model 0.3765 in ± 0.001 in
the AR-15 CAD reference set the user supplied, Deterrence Dispensed V11: a third-party model of a mil-spec rifle with a carbine stock, from the site owner
Read by its front face to its rear face, planes y 0 and y 0.3765
A mil-spec nut as the reference model has it: another nut, six turns of thread long where Guntec's photo shows four grooves and a part.
Its own thread as the scale, on one wall at one depth. Its near side read through its diameter agrees within the ±, and so does Redcon1's larger picture of it beside Guntec's chrome set (its near side 0.282, its thread 4.5 pitches); the reference model's mil-spec nut is 0.08 thicker, a conflict said: Guntec's CASTLE is a thinner nut (its heavy duty nut is 0.375).
ctd-thread and model differ by 0.083 in beyond what each states it is good to.
ctd-side and model differ by 0.1 in beyond what each states it is good to.
redcon1 and model differ by 0.095 in beyond what each states it is good to.
Notches on its rear face4CorroboratedPhoto: Cheaper Than Dirt: Guntec's CASTLE nut alone, 1000 x 1000; the rear face whole, seen from above
Photo 4 count used
Cheaper Than Dirt: Guntec's CASTLE nut alone, 1000 x 1000; the rear face whole, seen from above, harvested
Scale: none (a count). Read by the gaps in the rear face's rim, counted all the way round the ellipse: at about 30, 128, 209 and 301 degrees round the axis from the side nearest the lens (from where each gap's middle stands across the ellipse), 98, 81, 92 and 89 apart
Photo 4 count
Redcon1 Tactical: Guntec's red set laid out; this nut beside the set's tube, its rear face whole, harvested
Scale: none (a count). Read by the gaps in the rim, counted round the ellipse
Counted on the larger photo of the nut alone; the nut beside the set's tube in Redcon1's picture has as many.
Castle nut wrench notch width0.162 in ± 0.02 in 4.1 mmProvisionalPhoto: Cheaper Than Dirt: Guntec's CASTLE nut alone, 1000 x 1000
Photo 0.162 in ± 0.02 in used
Cheaper Than Dirt: Guntec's CASTLE nut alone, 1000 x 1000, harvested
Scale: its outside diameter (.od) across the picture, 958 px: 707 px/in. Read by the near notch at 30 degrees round from the lens's side: the backdrop seen through it from column 690 to 782 (rows 640 to 650), 92 px. A slot through a wall seen at that angle shows its width times the cosine less the wall's depth times the sine: (0.130 x 0.866) + 0.085 x 0.577
Read at first (2026-10-20) as 0.15, the gap over the cosine alone.
Castle nut wrench notch depth (into the rear face)0.115 in ± 0.02 in 2.9 mmProvisionalPhoto: Cheaper Than Dirt: Guntec's CASTLE nut alone, 1000 x 1000
Photo 0.115 in ± 0.02 in used
Cheaper Than Dirt: Guntec's CASTLE nut alone, 1000 x 1000, harvested
Scale: 708.6 px/in across; along the axis times the cosine 0.854. Read by the near notch at column 740: the rear face's outer edge there (row 630.6, on its ellipse) to the notch's floor's outer edge (row 700): 69.4 px
The floor is 0.42 of the way down the near side at that column, as the thickness and this depth make it (0.115 of 0.276 read on that side).
Castle nut, the radial hole in its side: diameter0.15 in ± 0.02 in 3.8 mmProvisionalPhoto: Cheaper Than Dirt: Guntec's CASTLE nut alone, 1000 x 1000
Photo 0.15 in ± 0.02 in used
Cheaper Than Dirt: Guntec's CASTLE nut alone, 1000 x 1000, harvested
Scale: 708.6 px/in across. Read by its dark disc across the picture, columns 333 to 436 (luminance under 40), 103 px, over the cosine of its 14 degrees round from the lens's side (0.970)
One hole, through its side between two notches: on Cheaper Than Dirt's photo of the CASTLE nut, and on the nut in Redcon1's picture of Guntec's red set and ABC Sportz's of its gold set (a copy on file). No page says what it is for.
Castle nut, the radial hole's centre from its front face0.133 in ± 0.03 in 3.4 mmProvisionalPhoto: Cheaper Than Dirt: Guntec's CASTLE nut alone, 1000 x 1000
Photo 0.133 in ± 0.03 in used
Cheaper Than Dirt: Guntec's CASTLE nut alone, 1000 x 1000, harvested
Scale: 708.6 px/in across; along the axis times the cosine 0.854. Read by the hole's middle (row 743) above the silhouette's bottom at its column (the front face's outer edge, row 823.6 on its ellipse): 80.6 px
About the middle of its thickness (0.294). Redcon1's small photo has it lower, nearer the front face, by eye.
Castle nut, the radial hole: how far round the axis from the nearest wrench notch44.5° ± 5°ProvisionalPhoto: Cheaper Than Dirt: Guntec's CASTLE nut alone, 1000 x 1000
Photo 44.5 deg ± 5 deg used
Cheaper Than Dirt: Guntec's CASTLE nut alone, 1000 x 1000, harvested
Scale: none (angles round the ellipse). Read by the hole's middle at -14 degrees round the axis from the lens's side, the two notches either side at 30 and -59: 44 and 45 degrees from each
Castle nut, the radial hole: how deep0.085 in ± 0.02 in 2.2 mmProvisionalWorked out: An assumption for the drawing, not a reading: no view on file shows the hole's bottom; drawn through the wall to the thread, the wall's thickness between its outside and the thread's crest ((1.352 - 1.1813) / 2).
Worked out 0.085 in ± 0.02 in used
An assumption for the drawing, not a reading: no view on file shows the hole's bottom; drawn through the wall to the thread, the wall's thickness between its outside and the thread's crest ((1.352 - 1.1813) / 2)., harvested
Castle nut, the break on its edges0.012 in ± 0.006 in 0.3 mmProvisionalWorked out: An assumption for the drawing, not a reading: Cheaper Than Dirt's photo shows the rear face's outer edge rounded over by a few pixels (rows 656 to 672 at column 500), about 0.02 in, which a 0.012 break with two segments draws.
Worked out 0.012 in ± 0.006 in used
An assumption for the drawing, not a reading: Cheaper Than Dirt's photo shows the rear face's outer edge rounded over by a few pixels (rows 656 to 672 at column 500), about 0.02 in, which a 0.012 break with two segments draws., harvested
What it goes with
By the way it mounts, and the figures each part on file states: a part whose figures say it doesn't fit is left out, and one whose fit can't be checked from what is published is marked. A check is against published figures, not a guarantee.
End plate, where the castle nut bears
Prices on file
Each seller's latest reading of its own page: before tax and shipping, and not a quote. The pages are read again every night.
- Cheaper Than Dirt $7.89 Nov 21, 2026, in stock that day
- Tactical Transition $7.95 Nov 21, 2026, in stock that day