End plate
BCM Receiver End Plate
The plate between the castle nut and the lower receiver: a ring round the receiver extension with a tab that covers the takedown pin's detent spring. BCM: "Receiver end plate for an adjustable stock for AR15, M4".

- Weight
- 0.51 oz ± 0.12 oz Provisionalworked out: ({.face_mean_width} * {.height} - 0.785398163 * {std.receiver_extension.thread_major_d} * {std.receiver_extension.thread_major_d}) * {.thickness} * {std.density.steel}
- Lowest price
- $4.00 at BCM, read Nov 21, 2026
- Maker's number
- RECEIVER-END-PLATE
- Colour
- Manganese phosphate, charcoal
- Drawn as
- modelled
- Maker's page
- bravocompanyusa.com
In “22RB .22 LR rifle”, a build on the start page, as it is.
Its figures
Every figure the site draws and checks it by, with where it came from. Open one for each source's reading, and why one is used where they differ.
End plate thickness0.13 in ± 0.03 in 3.3 mmCorroboratedPhoto: Aero Precision M4E1 complete lower with MOE SL, straight right side, 2000 px; supplied in chat
Photo 0.13 in ± 0.03 in used
Aero Precision M4E1 complete lower with MOE SL, straight right side, 2000 px; supplied in chat, from the site owner
Scale: pin frame: takedown, pivot, trigger, hammer, selector (Hough-refined), 130.6 px/in, rms 0.022 in. Read by silhouette step between the castle nut (1.32 in tall) and the plate (1.97 in tall), x −1.16 to −1.03 behind the takedown pin
Aero's kit plate; BCM's is taken to be the same mil-spec thickness. Read at a scale 2.5% too large (2026-10-05): on a 6x crop the plate runs from column 995.5 to 1013.5, 18 px, which is 0.14 in at the tube's own scale (125 ± 2 px/in): inside this ±.
Model 0.124 in ± 0.001 in
the AR-15 CAD reference set the user supplied, Deterrence Dispensed V11: a third-party model of a mil-spec rifle with a carbine stock, from the site owner
Read by the plate's two faces, planes y 0 and y 0.1240
A mil-spec plate as the reference model has it (2026-10-12): inside the photo's ±.
Read on a real plate installed; the reference model's mil-spec plate is 0.124, inside its ±.
End plate top above the tube axis0.69 in ± 0.03 in 17.5 mmCorroboratedPhoto: BCM: the kit assembled for display, side view on white, 1200 px; the nut sits ahead of the plate, reversed, so sizes only
Photo 0.69 in ± 0.03 in used
BCM: the kit assembled for display, side view on white, 1200 px; the nut sits ahead of the plate, reversed, so sizes only, harvested
Scale: the tube's top to its rail's bottom = 1.441 in (Magpul's partial drawing of the mil-spec carbine tube, scaled from its vectors by the research agent: 0.574 + 0.867; Magpul's identification card and a forum caliper reading, 1.45, agree), 138 px → 95.8 px/in; the tube reads 138 px from x 800 to 1100, so the view is near orthographic. Read by the plate's top edge (column extents x 462–482) above the tube axis (the tube's top + half its 1.146 OD)
Photo 0.65 in ± 0.04 in
Aero Precision M4E1 complete lower with MOE SL, straight right side, 2000 px; supplied in chat, from the site owner
Scale: pin frame: takedown, pivot, trigger, hammer, selector (Hough-refined), 130.6 px/in, rms 0.022 in. Read by plate top 1.54 in above the pin line; tube axis 0.89 in (the castle nut's centre)
Model 0.6817 in ± 0.001 in
the AR-15 CAD reference set the user supplied, Deterrence Dispensed V11: a third-party model of a mil-spec rifle with a carbine stock, from the site owner
Read by the ring's radius, r 0.6817
BCM's own plate in a near-orthographic view; the Aero photo's plate (another maker's, at the lens's compressed edge) agrees within its ±.
End plate tab bottom below the tube axis1.32 in ± 0.04 in 33.5 mmConflictPhoto: Aero Precision M4E1 complete lower with MOE SL, straight right side, 2000 px; supplied in chat
Photo 1.316 in ± 0.03 in
BCM: the kit assembled for display, side view on white, 1200 px; the nut sits ahead of the plate, reversed, so sizes only, harvested
Scale: the tube's top to its rail's bottom = 1.441 in (Magpul's partial drawing of the mil-spec carbine tube, scaled from its vectors by the research agent: 0.574 + 0.867; Magpul's identification card and a forum caliper reading, 1.45, agree), 138 px → 95.8 px/in; the tube reads 138 px from x 800 to 1100, so the view is near orthographic. Read by the lobe's bottom edge (x 470–478) below the tube axis
Photo 1.32 in ± 0.04 in used
Aero Precision M4E1 complete lower with MOE SL, straight right side, 2000 px; supplied in chat, from the site owner
Scale: pin frame: takedown, pivot, trigger, hammer, selector (Hough-refined), 130.6 px/in, rms 0.022 in. Read by plate bottom 0.43 in below the pin line; tube axis 0.89 in
Model 1.3788 in ± 0.001 in
the AR-15 CAD reference set the user supplied, Deterrence Dispensed V11: a third-party model of a mil-spec rifle with a carbine stock, from the site owner
Read by the lobe's round end, r 0.4266 about a centre 0.9522 below the axis
Another plate than BCM's: 0.06 lower than BCM's own, inside what this figure's notes give for Aero's.
The two photos agreed to the hundredth as first read. The user's was read at a scale 2.5% too large (2026-10-05: its pins fit the Army drawing's positions at 127.4 px/in, not 130.6): at its true scale its plate's lobe ends 1.35 to 1.38 in below the axis, which is Aero's plate; BCM's own photo has 1.316, 0.004 from the figure kept.
bcm-kit and model differ by 0.063 in beyond what each states it is good to.
photo and model differ by 0.059 in beyond what each states it is good to.
The tab that covers the takedown-pin detent hole.
End plate height (its top to its lobe's bottom)2.006 in ± 0.04 in 51 mmProvisionalWorked out: {.top_above_axis} + {.bottom_below_axis}
Worked out 2.006 in ± 0.04 in used
{.top_above_axis} + {.bottom_below_axis}, harvested
Photo 2.065 in ± 0.03 in
BCM receiver end plate, straight face-on, 623 x 800, harvested
Scale: the ring's hole, 330 px across, taken as the 1.185 in it must clear (the tube's threads, Magpul's partial drawing): a lower bound on the hole, so on this height. Read by the outline's height, 575 px (luminance < 150, largest piece, holes filled); at this scale the plate's top stands 0.707 above the hole's centre (the side photos: 0.69)
Two side photos measure the plate against the tube axis directly; the face-on photo's hole-scaled height is a lower bound that agrees within the ±. At the adopted scale the traced ring's centre falls 0.003 in from the axis.
What the face-on photo of BCM's plate (profiles.end_plate) is scaled to.
Its face's area over its height (the width of a rectangle as tall with the same area)0.974 in ± 0.02 in 24.7 mmProvisionalPhoto: BCM receiver end plate, straight face-on, 623 x 800
Photo 0.974 in ± 0.02 in used
BCM receiver end plate, straight face-on, 623 x 800, harvested
Scale: the traced outline's own scale (profiles.face: its height, .height). Read by the traced outline's area (1.954 square inches, the hole and the boss filled) over its height (2.006 in)
A way to hold the outline's area as a length: what the plate's weight is worked out from.
End plate, how far its boss stands out of its front face0.065 in ± 0.002 in 1.6 mmProvisionalModel: the AR-15 CAD reference set the user supplied, Deterrence Dispensed V11: a third-party model of a mil-spec rifle with a carbine stock
Model 0.0645 in ± 0.002 in used
the AR-15 CAD reference set the user supplied, Deterrence Dispensed V11: a third-party model of a mil-spec rifle with a carbine stock, from the site owner
Read by the boss's face, plane y 0.1885 of a plate 0.1240 thick
End plate, its boss side to side0.496 in ± 0.002 in 12.6 mmProvisionalModel: the AR-15 CAD reference set the user supplied, Deterrence Dispensed V11: a third-party model of a mil-spec rifle with a carbine stock
Model 0.496 in ± 0.002 in used
the AR-15 CAD reference set the user supplied, Deterrence Dispensed V11: a third-party model of a mil-spec rifle with a carbine stock, from the site owner
Read by an obround: two r 0.1875 ends at x ±0.0605
End plate, its boss top to bottom0.375 in ± 0.002 in 9.5 mmProvisionalModel: the AR-15 CAD reference set the user supplied, Deterrence Dispensed V11: a third-party model of a mil-spec rifle with a carbine stock
Model 0.375 in ± 0.002 in used
the AR-15 CAD reference set the user supplied, Deterrence Dispensed V11: a third-party model of a mil-spec rifle with a carbine stock, from the site owner
Read by the obround's two ends' diameter
End plate, its boss's middle below the tube's axis0.997 in ± 0.002 in 25.3 mmProvisionalModel: the AR-15 CAD reference set the user supplied, Deterrence Dispensed V11: a third-party model of a mil-spec rifle with a carbine stock
Model 0.9974 in ± 0.002 in used
the AR-15 CAD reference set the user supplied, Deterrence Dispensed V11: a third-party model of a mil-spec rifle with a carbine stock, from the site owner
Read by the obround's centre
End plate, the dimple in its rear face behind the boss0.063 in ± 0.002 in 1.6 mmProvisionalModel: the AR-15 CAD reference set the user supplied, Deterrence Dispensed V11: a third-party model of a mil-spec rifle with a carbine stock
Model 0.063 in ± 0.002 in used
the AR-15 CAD reference set the user supplied, Deterrence Dispensed V11: a third-party model of a mil-spec rifle with a carbine stock, from the site owner
Read by plane y 0.0630; the dimple is the boss's outline 0.005 larger all round
What it goes with
By the way it mounts, and the figures each part on file states: a part whose figures say it doesn't fit is left out, and one whose fit can't be checked from what is published is marked. A check is against published figures, not a guarantee.
Receiver extension end
End plate, where the castle nut bears
Prices on file
Each seller's latest reading of its own page: before tax and shipping, and not a quote. The pages are read again every night.
- BCM $4.00 Nov 21, 2026, in stock that day