Receiver extension
Geissele Automatics Premium Mil-Spec Buffer Tube
Geissele's mil-spec carbine buffer tube, six positions, 7075-T6 under a Type 3 hardcoat anodize in black, Desert Dirt, OD green or gray. Its sellers, in the words they share: "The Geissele Premium Mil-Spec Buffer Tube is machined from quality 7075-T6 Aluminum and finished in Type 3 Hardcoat Anodize, available in Black, Geissele's DDC, and ODG. This rigid and durable buffer tube conforms to all mil-spec standards and features 6 stock positions. This carbine length and mil-spec diameter Premium Buffer Tube is made in the USA and weighs in at 3.7oz" (Mile High Shooting, Midwest Optics, Charlie's Custom Clones). Charlie's sells it with "a high-quality, mil-spec castle nut and end plate" as an assembly in gray and DDC: "Forged 7075-T6 buffer (extension) tube Mil-spec diameter, carbine length 6-position for collapsible stocks Fits most all AR15 lowers, including M4 lower receivers Type 3 hardcoat anodized, gray color Geissele logo". Every seller's package has the nut and the plate in it ("Included in the package is a high-quality, mil-spec castle nut and end plate": Mile High, Midwest Optics, Charlie's; Primary Arms' photos): the tube isn't sold without them, and they are parts of their own here. Its rail comes down to full depth by a long ramp, with a shallow strip ahead of it, and a channel with round ends runs along the rail's underside through its six holes; Geissele's logo is on the rail's right side at the rear.

- Weight
- 3.7 oz Conflictpublished: Charlie's Custom Clones, Geissele Premium Mil-Spec Buffer Tube Assembly - Gray (its SKU G081637, its markup's mpn 08-162G), the Technicals list, a seller, read Nov 3, 2026Its sources span 3.65 oz to 9.37 oz.
- Lowest price
- Sold in the Geissele Automatics Premium AR-15 H1 Buffer Tube Kit With Super 42 - Carbine, not by itself
- Maker's number
- 08-162B
- Colours
- Black, Desert Dirt Color (DDC), Gray
- Drawn as
- modelled
- Maker's page
- milehighshooting.com
In “22RB .22 LR rifle”, a build on the start page, in place of its BCM Milspec Carbine Receiver Extension (Buffer Tube) 6 Position.
Its figures
Every figure the site draws and checks it by, with where it came from. Open one for each source's reading, and why one is used where they differ.
The tube's outside diameter1.148 in 29.2 mmConfirmedWorked out: {std.receiver_extension.milspec_od}
Worked out 1.148 in used
{std.receiver_extension.milspec_od}, harvested
The standard mil-spec carbine tube's: every seller sells it as mil-spec.
Photo 1.133 in ± 0.04 in
Primary Arms' 08-162B_00: the black tube's right side seen level, 2200 x 1467, harvested
Scale: its own thread's pitch (std.receiver_extension.thread_pitch, 16 to the inch): 17 crests along its lower edge over 287 px, 270.1 px/in. Read by the body's top edge (row 546) above the axis, the axis midway between the thread's crests top and bottom (rows 547 and 851): 153 px, doubled. A black tube on white reads a few percent thin at its edge; the ± covers that.
The standard's: every seller's page says mil-spec diameter, and the photo reads it within its ± (a black tube's edge reads thin).
Sold as mil-spec: "Mil-spec diameter, carbine length" (Charlie's), "mil-spec-diameter" (Mile High), "6-position Mil-Spec carbine buffer tube" (Primary Arms).
The tube's length7.25 in ± 0.02 in 184.1 mmConfirmedPublished: Magpul, "M4 Receiver Extension, Carbine, Military" partial drawing (rev A, 2008-03-24), hosted by ar15tactical.com, the maker, read Oct 18, 2026
Published “7.25 (the side view's overall length; "TWO PLACE DECIMAL .020")” used
Magpul, "M4 Receiver Extension, Carbine, Military" partial drawing (rev A, 2008-03-24), hosted by ar15tactical.com, the maker, read Oct 18, 2026 the page, harvested Oct 18, 2026
The drawing of the mil-spec carbine tube a stock maker draws its stocks to; Geissele's is sold as a mil-spec carbine tube ("Mil-spec diameter, carbine length").
Photo 7.26 in ± 0.03 in
Primary Arms' 08-162B_00: the black tube's right side seen level, 2200 x 1467, harvested
Scale: its own thread's pitch (std.receiver_extension.thread_pitch, 16 to the inch): 17 crests along its lower edge between columns 1747 and 2034, 270.1 px/in, in the plane of the axis as the silhouette's ends are. Read by the silhouette's rear face (column 119) to the mouth's front face (column 2080): 1961 px
The two agree: Geissele's own tube, scaled by its own thread, is the drawing's length within 0.01 in. The drawing's figure is the finer.
No page gives it in inches ("carbine length", every page). Magpul's drawing of the mil-spec carbine tube, and Geissele's own black tube on Primary Arms' photo scaled by its own thread.
The tube's front face behind the takedown pin (how far it screws in)0.669 in ± 0.02 in 17 mmConfirmedWorked out: -{std.receiver_extension.front_face_x}
Worked out 0.669 in ± 0.02 in used
-{std.receiver_extension.front_face_x}, harvested
The Army's drawings: a mil-spec tube is screwed in until its edge stands over the buffer retainer's shoulder.
Hidden inside the receiver: what it moves is the rail's ramp, the strip ahead of it, the channel and the six holes.
The stock position step0.658 in ± 0.01 in 16.7 mmProvisionalPhoto: Primary Arms' 08-162S_02: the DDC tube's underside seen square on, 2200 x 1467
Photo 0.658 in ± 0.01 in used
Primary Arms' 08-162S_02: the DDC tube's underside seen square on, 2200 x 1467, harvested
Scale: the tube's length (tube_length, 7.25 in) between its rear face (column 126) and its mouth (column 2073): 268.6 px/in. Read by the six holes' centres along the rail's middle (row 718: columns 259, 439, 616, 790, 967, 1144, the middles of each hole's dark ring), a line fitted through them: 176.7 px a step
Worked out 0.66 in
{magpul-moe-sl-carbine.position_step}, harvested
Magpul's MOE SL travel over a mil-spec carbine tube's six positions: what a stock on any mil-spec tube moves by.
Geissele's own tube; Magpul's travel for a mil-spec tube agrees within its last digit.
Six positions ("6-position for collapsible stocks", Charlie's; "features 6 stock positions", Mile High): five steps between six holes.
The position holes' diameter (in the rail's channel)0.331 in ± 0.02 in 8.4 mmProvisionalPhoto: Primary Arms' 08-162S_02: the DDC tube's underside seen square on
Photo 0.331 in ± 0.02 in used
Primary Arms' 08-162S_02: the DDC tube's underside seen square on, harvested
Scale: the tube's length, 268.6 px/in (position_step). Read by the holes' dark rings along row 718: 84 to 90 px across (the rear one 214 to 304), 89 px the median
Each hole is as wide as the channel it is in: the channel's round ends are the rear and the front hole's rims (the DDC tube's underside, 47c7ff62f2dd; the black tube's from a little below, 40caefb1150b). Each has a small hole in its floor (31 px across, 0.115 in), not drawn.
The rear position hole's centre ahead of the tube's rear face0.495 in ± 0.02 in 12.6 mmProvisionalPhoto: Primary Arms' 08-162S_02: the DDC tube's underside seen square on
Photo 0.495 in ± 0.02 in used
Primary Arms' 08-162S_02: the DDC tube's underside seen square on, harvested
Scale: the tube's length, 268.6 px/in (position_step). Read by the rear hole's centre (column 259) from the rear face (column 126): 133 px
The channel along the rail's underside, its width0.335 in ± 0.02 in 8.5 mmProvisionalPhoto: Primary Arms' 08-162S_02: the DDC tube's underside seen square on
Photo 0.335 in ± 0.02 in used
Primary Arms' 08-162S_02: the DDC tube's underside seen square on, harvested
Scale: the tube's length, 268.6 px/in (position_step). Read by the channel's two walls between the holes (columns 330 and 700: the dark line of its lit wall at row 671 and the step at 761): 90 px
A slot with round ends along the rail's bottom face, from the rear hole to the front one, the six holes in its floor (the DDC tube's underside; the black tube's three-quarter view from below, 40caefb1150b, has it as a dark slot along the rail with round ends).
The channel along the rail's underside, its depth0.05 in ± 0.03 in 1.3 mmProvisionalWorked out: An assumption for the drawing, not a reading: no view on file shows the channel in section. The underside photo has its wall as a lit band 2 to 3 px wide at a lens nearly square to the floor, and the black tube's view from a little below (40caefb1150b) a dark slot: shallow next to the rail's 0.30 in.
Worked out 0.05 in ± 0.03 in used
An assumption for the drawing, not a reading: no view on file shows the channel in section. The underside photo has its wall as a lit band 2 to 3 px wide at a lens nearly square to the floor, and the black tube's view from a little below (40caefb1150b) a dark slot: shallow next to the rail's 0.30 in., harvested
The rail's ramp: where it reaches the rail's full depth, behind the tube's front face2.897 in ± 0.02 in 73.6 mmCorroboratedPhoto: Primary Arms' 08-162B_00: the black tube's right side seen level
Photo 2.897 in ± 0.02 in used
Primary Arms' 08-162B_00: the black tube's right side seen level, harvested
Scale: its own thread's pitch, 270.1 px/in (tube_length). Read by the silhouette's lower edge leaves the rail's bottom (row 934) at column 1297 (on a 2x crop): 783 px behind the mouth's front face (column 2080)
Photo 2.867 in ± 0.02 in
Primary Arms' 08-162S_02: the DDC tube's underside seen square on, harvested
Scale: the tube's length, 268.6 px/in (position_step). Read by the ramp's lit face begins at column 1303 along row 718, 770 px behind the mouth (column 2073)
The silhouette: an edge against the backdrop. The underside view's lit face agrees within the two readings' ±.
Geissele's rail comes down from the strip to its full depth by a long ramp, about 30 degrees to the axis, not the drawing's 45 (std.receiver_extension.rail_ramp_start, _end: 2.326 and 2.592): both photos show it.
The rail's ramp: where it meets the strip ahead of it, behind the tube's front face2.416 in ± 0.02 in 61.4 mmCorroboratedPhoto: Primary Arms' 08-162B_00: the black tube's right side seen level
Photo 2.416 in ± 0.02 in used
Primary Arms' 08-162B_00: the black tube's right side seen level, harvested
Scale: its own thread's pitch, 270.1 px/in (tube_length). Read by the ramp's top end on the silhouette's lower edge, column 1427 (on a 2x crop): 653 px behind the mouth's front face
Photo 2.394 in ± 0.02 in
Primary Arms' 08-162S_02: the DDC tube's underside seen square on, harvested
Scale: the tube's length, 268.6 px/in (position_step). Read by the ramp's lit face ends at column 1430 along row 718, 643 px behind the mouth
The silhouette; the underside view's agrees within the readings' ±.
The strip the rail runs on as ahead of the ramp: its front end, behind the tube's front face1.507 in ± 0.02 in 38.3 mmCorroboratedPhoto: Primary Arms' 08-162B_00: the black tube's right side seen level
Photo 1.507 in ± 0.02 in used
Primary Arms' 08-162B_00: the black tube's right side seen level, harvested
Scale: its own thread's pitch, 270.1 px/in (tube_length). Read by the strip's square front end on the silhouette's lower edge, column 1673 (on a 2x crop): 407 px behind the mouth
Photo 1.475 in ± 0.02 in
Primary Arms' 08-162S_02: the DDC tube's underside seen square on, harvested
Scale: the tube's length, 268.6 px/in (position_step). Read by the strip's front end, column 1677 (on a 1.5x crop), 396 px behind the mouth
The silhouette; the underside view's is 0.03 in ahead of it, within the two readings' ±.
Ahead of the ramp the rail goes on as a shallow strip of the rail's width under the tube to a square front end, where the plain body runs on to the thread: the black tube's side (c5f8fd0417ad) and the DDC's underside (47c7ff62f2dd), where it is the darker rectangle ahead of the ramp's lit face.
The strip ahead of the ramp: its floor below the tube's axis0.59 in ± 0.02 in 15 mmProvisionalPhoto: Primary Arms' 08-162B_00: the black tube's right side seen level
Photo 0.59 in ± 0.02 in used
Primary Arms' 08-162B_00: the black tube's right side seen level, harvested
Scale: its own thread's pitch, 270.1 px/in (tube_length). Read by the strip's floor (row 859) below the axis, which stands the mil-spec radius (0.574) under the body's top edge (row 546): 159 px; from the axis midway between the thread's crests, 160
0.016 in below the tube's round: the strip stands just proud of it.
The thread's length, from the tube's front face to where its crests end1.288 in ± 0.04 in 32.7 mmCorroboratedPhoto: Primary Arms' 08-162B_00: the black tube's right side seen level
Photo 1.288 in ± 0.04 in used
Primary Arms' 08-162B_00: the black tube's right side seen level, harvested
Scale: its own thread's pitch, 270.1 px/in (tube_length). Read by the first crest's groove behind the plain body, column 1732 (on a 2x crop), 348 px behind the mouth; where a thread ends depends on which side it is seen from by up to a pitch
Photo 1.214 in ± 0.04 in
Primary Arms' 08-162S_02: the DDC tube's underside seen square on, harvested
Scale: the tube's length, 268.6 px/in (position_step). Read by the plain body's front edge, where the first groove begins, column 1747 (on a 2x crop), 326 px behind the mouth
Photo 1.29 in ± 0.05 in
Charlie's Custom Clones' picture of five assemblies under one light, 3300 x 1696: the black one at the bottom, its nut turned down on its plate, the tube seen from the side, harvested
Scale: the tube's own outside diameter behind the nut, taken as the mil-spec 1.148: 208.5 px, 181.6 px/in. Read by the nut's rear face (column 2045, on a 2x crop) to the mouth (column 2270): 1.24 in, and the thread that shows behind the nut, a dark band 10 px wide (0.055): where the thread ends
A third photo, of a third tube: the nut and plate are turned on it 0.31 in further back than a lower's rear face would hold them, so all but 0.05 of the thread is under them.
Read where the side view's silhouette shows the first groove; the underside's, a half turn round, is 0.07 in shorter: a little more than a turn of the thread's run-out, within the two readings' ± together.
Geissele's own: the mil-spec carbine tube's in the reference model is 1.181 (std.receiver_extension.thread_length). Behind the thread the plain body runs on, ahead of it a plain lip at the mouth.
The plain lip at the mouth, ahead of the thread's first crest0.11 in ± 0.02 in 2.8 mmProvisionalPhoto: Primary Arms' 08-162B_00: the black tube's right side seen level
Photo 0.11 in ± 0.02 in used
Primary Arms' 08-162B_00: the black tube's right side seen level, harvested
Scale: its own thread's pitch, 270.1 px/in (tube_length). Read by the last crest (column 2050) to the front face (2080) on the silhouette's top edge: 30 px. It stands at about the thread's roots (its top 10 px under the crests on a 2x crop)
The slot under the thread that the end plate's key rides in: its length from the tube's front face1 in ± 0.03 in 25.4 mmProvisionalPhoto: Primary Arms' 08-162S_02: the DDC tube's underside seen square on
Photo 1 in ± 0.03 in used
Primary Arms' 08-162S_02: the DDC tube's underside seen square on, harvested
Scale: the tube's length, 268.6 px/in (position_step). Read by the slot's rear end (column 1805, on a 2x crop) to the mouth (column 2073): 268 px
Shorter than the reference model's carbine tube's 1.24 (std.receiver_extension.key_slot_length): Geissele's own.
At six o'clock, through the thread's crests (the DDC tube's underside; the black one's, 4de6884b3cf8). Its width is the standard's (std.receiver_extension.key_slot_width, 0.125): it reads 0.121 on the underside (32.5 px).
The break on the tube's rear outer edge0.06 in ± 0.02 in 1.5 mmProvisionalPhoto: Primary Arms' 08-162B_00: the black tube's right side seen level
Photo 0.06 in ± 0.02 in used
Primary Arms' 08-162B_00: the black tube's right side seen level, harvested
Scale: its own thread's pitch, 270.1 px/in (tube_length). Read by the silhouette's top rear corner: the top edge reaches its level (row 546) 18 px ahead of the rear face (column 119 to 137), and the rear face its full height about as far below it; drawn as a 45 degree chamfer of that size
Geissele's mark: its first line's rear end ahead of the tube's rear face0.204 in ± 0.01 in 5.2 mmProvisionalPhoto: Primary Arms' 08-162B_00: the black tube's right side seen level
Photo 0.204 in ± 0.01 in used
Primary Arms' 08-162B_00: the black tube's right side seen level, harvested
Scale: its own thread's pitch, 270.1 px/in (tube_length). Read by the G's rear edge, column 174, from the rear face, column 119: 55 px
Geissele's mark: its first line (GEISSELE), its length0.689 in ± 0.01 in 17.5 mmProvisionalPhoto: Primary Arms' 08-162B_00: the black tube's right side seen level
Photo 0.689 in ± 0.01 in used
Primary Arms' 08-162B_00: the black tube's right side seen level, harvested
Scale: its own thread's pitch, 270.1 px/in (tube_length). Read by the line's light strokes, columns 174 to 360: 186 px
Geissele's mark: its first line's capitals, their height0.093 in ± 0.008 in 2.4 mmProvisionalPhoto: Primary Arms' 08-162B_00: the black tube's right side seen level
Photo 0.093 in ± 0.008 in used
Primary Arms' 08-162B_00: the black tube's right side seen level, harvested
Scale: its own thread's pitch, 270.1 px/in (tube_length). Read by the line's light strokes, rows 857.5 to 882.5: 25 px
Geissele's mark: its first line's foot above the rail's bottom0.193 in ± 0.008 in 4.9 mmProvisionalPhoto: Primary Arms' 08-162B_00: the black tube's right side seen level
Photo 0.193 in ± 0.008 in used
Primary Arms' 08-162B_00: the black tube's right side seen level, harvested
Scale: its own thread's pitch, 270.1 px/in (tube_length). Read by the line's foot, row 882.5, above the rail's bottom, row 934.5: 52 px
Geissele's mark: its second line's rear end ahead of the tube's rear face0.263 in ± 0.01 in 6.7 mmProvisionalPhoto: Primary Arms' 08-162B_00: the black tube's right side seen level
Photo 0.263 in ± 0.01 in used
Primary Arms' 08-162B_00: the black tube's right side seen level, harvested
Scale: its own thread's pitch, 270.1 px/in (tube_length). Read by the A's rear edge, column 190, from the rear face: 71 px
Geissele's mark: its second line (AUTOMATICS), its length0.555 in ± 0.01 in 14.1 mmProvisionalPhoto: Primary Arms' 08-162B_00: the black tube's right side seen level
Photo 0.555 in ± 0.01 in used
Primary Arms' 08-162B_00: the black tube's right side seen level, harvested
Scale: its own thread's pitch, 270.1 px/in (tube_length). Read by the line's light strokes, columns 190 to 340: 150 px
Geissele's mark: its second line's capitals, their height0.067 in ± 0.008 in 1.7 mmProvisionalPhoto: Primary Arms' 08-162B_00: the black tube's right side seen level
Photo 0.067 in ± 0.008 in used
Primary Arms' 08-162B_00: the black tube's right side seen level, harvested
Scale: its own thread's pitch, 270.1 px/in (tube_length). Read by the line's light strokes, rows 896 to 914: 18 px
Geissele's mark: its second line's foot above the rail's bottom0.076 in ± 0.008 in 1.9 mmProvisionalPhoto: Primary Arms' 08-162B_00: the black tube's right side seen level
Photo 0.076 in ± 0.008 in used
Primary Arms' 08-162B_00: the black tube's right side seen level, harvested
Scale: its own thread's pitch, 270.1 px/in (tube_length). Read by the line's foot, row 914, above the rail's bottom: 20.5 px
Geissele's mark: how far the model stands it off the rail's face0.002 in ± 0.002 in 0.1 mmProvisionalWorked out: An assumption for the drawing, not a reading: a laser mark is in the face, not on it; drawn this far proud so that its own colour shows over the face's.
Worked out 0.002 in ± 0.002 in used
An assumption for the drawing, not a reading: a laser mark is in the face, not on it; drawn this far proud so that its own colour shows over the face's., harvested
Geissele's mark: its letters' slant from upright12.7° ± 2°ProvisionalPhoto: Primary Arms' 08-162B_00: the black tube's right side seen level
Photo 12.7 deg ± 2 deg used
Primary Arms' 08-162B_00: the black tube's right side seen level, harvested
Scale: none: an angle in the photo's plane. Read by the rear edges of four letters' upright strokes (E, I, L, E) in a row near the capitals' top (row 860) and one near their foot (row 880): 4 to 5 px further forward at the top over 20 rows, atan(4.5 / 20)
What it goes with
By the way it mounts, and the figures each part on file states: a part whose figures say it doesn't fit is left out, and one whose fit can't be checked from what is published is marked. A check is against published figures, not a guarantee.
AR-15 receiver extension thread
- Lower receivers
- Aero Precision M4E1 complete lower, A2 grip and M4 stock, Aero Precision M4E1 Stripped Lower Receiver, Battle Arms Development Workhorse stripped lower, BCM MK2 AR-15 Lower Receiver, Bear Creek Arsenal BC-15 Multi Caliber, Lower Receiver, Black Anodized, Geissele Automatics Super Duty AR-15 Lower Receiver - Stripped Lower, Palmetto State Armory AR-15 "Stealth" Stripped Lower Receiver
- Folding stock adapters
- Law Tactical AR Folding Stock Adapter Gen 3-M, Law Tactical AR Folding Stock Adapter GEN-S, Sylvan Arms SA5 Pro AR15 Folding Stock Adapter (Opens To The Left), Sylvan Arms SA5 Pro AR15 Folding Stock Adapter (Opens To The Right)
Receiver extension (buffer tube)
- Stocks
- B5 Systems Bravo Stock, B5 Systems Enhanced SOPMOD Stock, BCM Stock - Mod 0, Magpul CTR carbine stock, mil-spec, Magpul MOE carbine stock, mil-spec, Magpul MOE SL carbine stock, mil-spec, Mission First Tactical BATTLELINK Minimalist Milspec Stock
- Braces
- SB Tactical SBA3® AR Adjustable Pistol Stabilizing Brace®, SB Tactical SBA4® AR Adjustable Pistol Stabilizing Brace®, SB Tactical SBA5® AR Adjustable Pistol Stabilizing Brace®
Receiver extension end
Receiver extension bore
- Buffers
- Armaspec Stealth™ Recoil Spring - SRS™- AR15 GEN4, C (3.3 oz), Armaspec Stealth™ Recoil Spring - SRS™- AR15 GEN4, H (3.8 oz), Armaspec Stealth™ Recoil Spring - SRS™- AR15 GEN4, H2 (4.7 oz), Armaspec Stealth™ Recoil Spring - SRS™- AR15 GEN4, H3 (5.6 oz), BCM Carbine Buffer, BCM H Carbine Buffer, BCM H2 Carbine Buffer, BCM H3 Carbine Buffer, BCM MK2 Buffer Mod 1 - T0, Geissele Automatics Super 42 Braided Wire Buffer Spring and Buffer Combo, H1, Geissele Automatics Super 42 Braided Wire Buffer Spring and Buffer Combo, H2, Geissele Automatics Super 42 Braided Wire Buffer Spring and Buffer Combo, H3, Guntec USA AR-15 Mil-Spec Car Buffer, Guntec USA AR-15 Stainless Steel Car Buffer, JP Enterprises Silent Captured Spring AR-15 Heavy H2 GEN 2, JP Enterprises Silent Captured Spring AR-15 Heavy H3 GEN 2, JP Enterprises Silent Captured Spring AR-15 Standard GEN 2, KynSHOT RB5000, KynSHOT RB5000HP (High Performance), Panzer Arms AR57 proprietary carbine buffer, VLTOR A5H2 Buffer, 5.3 oz.
- Buffer springs
- BCM Carbine Action Spring, BCM Rifle M16 Action Spring, Guntec USA Upgraded Chrome Silicon Spring, VLTOR A5 Action Spring