Buffer
Armaspec Stealth™ Recoil Spring - SRS™- AR15 GEN4, H3 (5.6 oz)
A buffer weight and its spring captured on a guide rod as one unit, in the receiver extension in place of both the buffer and the action spring. The maker's page: "The Stealth Recoil Spring™ SRS™ GEN4 is a self-contained multi-stage drop-in replacement for your standard buffer and spring. The SRS™ is designed to keep the buffer spring from rubbing against the inner wall of the buffer tube providing smooth, quiet operation and the second stage helps reduce the felt recoil significantly." "COMPATIBILITY: AR-15 with carbine-length buffer tube"; "Most bolt carriers have a rear opening of over .60″, there are a couple of bolt carriers in the market place that have a rear opening of under .60″ and will not function with the SRS." "The polymer bumper goes towards the rear of the firearm and the metal weight mass goes towards the bolt carrier." "The SRS can be installed with our without the buffer retainer." The H3's weight is the longest, and its bumper is half the others' length. The maker's guide names the H3, or the H2, for a suppressed 5.56 with a 10.5 in barrel ("Perfect. A 4.7/SRS-H2 or a 5.6/SRS-H3 is what you need!").

- Weight
- 8 oz ± 0.05 oz Confirmedpublished: Armaspec, Stealth™ Recoil Spring - SRS™- AR15 GEN4 (the maker's page), the maker, read Oct 18, 2026
- Lowest price
- $76.49 at MidwayUSA, read Nov 21, 2026
- Maker's number
- ARM253-H3
- Colour
- Natural stainless
- Drawn as
- modelled
- Maker's page
- armaspec.com
In “BCM 16 in mid-length”, a build on the start page, in place of its BCM Carbine Buffer.
Its figures
Every figure the site draws and checks it by, with where it came from. Open one for each source's reading, and why one is used where they differ.
Length (the weight's front face to the bumper's rear face)7.18 in ± 0.005 in 182.4 mmConfirmedWorked out: {armaspec-stealth-recoil-spring-gen4-h.length}
Worked out 7.18 in ± 0.005 in used
{armaspec-stealth-recoil-spring-gen4-h.length}, harvested
The maker gives one length for every version; its lineup has the H3 981 px end to end against the others' 983.
The buffer weight it stands for (the maker's "equivalent")5.6 oz ± 0.05 ozConfirmedPublished: Armaspec, Stealth™ Recoil Spring - SRS™- AR15 GEN4 (the maker's page), the maker, read Oct 18, 2026
Published “Equivalent Weight: C: 3.3 oz. H: 3.8 oz. H2: 4.7 oz. H3: 5.6 oz.” used
Armaspec, Stealth™ Recoil Spring - SRS™- AR15 GEN4 (the maker's page), the maker, read Oct 18, 2026 the page, harvested Oct 18, 2026
The weight's diameter (it runs in the extension's bore)0.946 in ± 0.015 in 24 mmProvisionalWorked out: {armaspec-stealth-recoil-spring-gen4-h.od}
Worked out 0.946 in ± 0.015 in used
{armaspec-stealth-recoil-spring-gen4-h.od}, harvested
The H3's weight, its length1.962 in ± 0.02 in 49.8 mmProvisionalPhoto: the maker's lineup, the H3 at the bottom
Photo 1.962 in ± 0.02 in used
the maker's lineup, the H3 at the bottom, harvested
Scale: the unit's own length end to end, 981 px for 7.18 in (136.6 px/in). Read by from its rear face (713 px from the unit's rear end) to its front (981)
The H3's bumper, its length0.761 in ± 0.03 in 19.3 mmProvisionalPhoto: a photo on file
Photo 0.761 in ± 0.03 in used
a photo on file, harvested
Scale: the unit's own length end to end, 981 px for 7.18 in. Read by from the unit's rear end to where the silhouette falls from 131 px to the spring's (104 px)
Where the H3's washer's front face stands, behind the weight's front face3.082 in ± 0.02 in 78.3 mmProvisionalPhoto: the maker's lineup, the H3
Photo 3.082 in ± 0.02 in used
the maker's lineup, the H3, harvested
Scale: the unit's own length end to end, 981 px for 7.18 in. Read by 560 px from the unit's rear end: 421 px from the front
How deep the second spring goes into the pocket in the H3's weight's rear face0.18 in ± 0.08 in 4.6 mmProvisionalPhoto: the maker's side view of the H3/BB, 1482 px end to end) beside 954e1211557e (the H's, 1491 px: one scale within 0.6%
Photo 0.18 in ± 0.08 in used
the maker's side view of the H3/BB, 1482 px end to end) beside 954e1211557e (the H's, 1491 px: one scale within 0.6%, harvested
Scale: the H's second spring's length (armaspec-stealth-recoil-spring-gen4-h.washer_front_x less its weight_length, 1.504 in) and the ratio of the two photos' coil pitches. Read by the H3's open coils stand 35 px apart against the H's 40.5, so its spring is held at 0.86 of the H's length, 1.30 in; the lineup shows 1.12 in of it between the washer and the weight; the rest, 0.18 in, is in the pocket. About eight of the ten coils show, which agrees
Not the H2's reasoning (the same pitch, the same length): the H3's spring is held shorter, its washer further back.
The H3's main spring's coils (its run is longer than the others')27 ± 2ProvisionalPhoto: the maker's lineup, the H3) and 5a44c78c3155 (the maker's side view of the H3/BB
Photo 27 count ± 1.5 count used
the maker's lineup, the H3) and 5a44c78c3155 (the maker's side view of the H3/BB, harvested
Scale: none: a count. Read by the run from the bumper to the washer over the coils' pitch by the brightness's autocorrelation along it: 424 px over 15.0 px, 28.2, in the lineup (the others' 381 over 16.9, 22.6, against the 25 counted on the H's own photo), and 26.3 in its side view; the H's 25 doesn't fill the H3's longer run at the H's pitch
What it goes with
By the way it mounts, and the figures each part on file states: a part whose figures say it doesn't fit is left out, and one whose fit can't be checked from what is published is marked. A check is against published figures, not a guarantee.
Receiver extension bore
- Receiver extensions
- BCM Milspec Carbine Receiver Extension (Buffer Tube) 6 Position, BCM MK2 Receiver Extension, Geissele Automatics Premium Mil-Spec Buffer Tube, Guntec USA AR-15 Mil-Spec Buffer Tube (Gen 2), SB Tactical SBPDW receiver extension, housing and integral castle nut, VLTOR RE-A5 7-Position Receiver Extension, MilSpec Diameter
Prices on file
Each seller's latest reading of its own page: before tax and shipping, and not a quote. The pages are read again every night.
- MidwayUSA $76.49 Nov 21, 2026, in stock that day
- Midwest Gun Works $76.49 Nov 21, 2026, in stock that day
- Rifle Supply $82.99 Nov 21, 2026, out of stock that day