Buffer
Geissele Automatics Super 42 Braided Wire Buffer Spring and Buffer Combo, H1
A recoil spring and the buffer made for it, sold as a set: the spring is wound of three strands of wire twisted together, and it takes the place of both the buffer and the spring. The maker's sheet: "Its unique spring design uses three independent strands of wire, just like the German MG42 Machine Gun." This set's buffer is the H1: one tungsten weight and two steel inside it. The maker's sheet: "The Geissele Super 42 Spring and Buffer Combination ships in the standard H1 configuration." "The H1 and Braided Wire Spring works well in 18” SPRs, 16” rifles with mid-length or carbine gas systems and some 14.5” rifles." Mile High Shooting, which sells it: "The Super 42 is for use with Carbine-length buffer tubes and is not compatible with rifle-length or A5 buffer tubes/receiver extensions." "The Super 42 spring and Geissele buffer are designed to work together as a set; the spring will not fit over a standard buffer."

- Weight
- 5.42 oz ± 0.03 oz Provisionalworked out: {.buffer_weight} + {.spring_weight}
- Lowest price
- $71.99 at GRITR Sports, read Nov 21, 2026
- Maker's number
- 05-495
- Colour
- Geissele buffer, pale gold
- Drawn as
- modelled
- Maker's page
- geissele.com
In “BCM 16 in mid-length”, a build on the start page, in place of its BCM Carbine Buffer.
Its figures
Every figure the site draws and checks it by, with where it came from. Open one for each source's reading, and why one is used where they differ.
The buffer's weight3.78 oz ± 0.02 ozCorroboratedPublished: Blowback9, Geissele Super 42 (an owner's write-up of an H1 kit he bought; his own measurements, no instrument named), a review, read Oct 12, 2026
Published “H1 weight: 3.78oz.” used
Blowback9, Geissele Super 42 (an owner's write-up of an H1 kit he bought; his own measurements, no instrument named), a review, read Oct 12, 2026 the page, harvested Oct 12, 2026
Published “Buffer H1 Carbine Platform AR-15 Weight 4 oz.”
Primary Arms, Geissele Automatics Super 42 AR-15 H1 Buffer With Braided Wire Spring - Carbine, a seller, read Oct 12, 2026 the page, harvested Oct 12, 2026
A figure to the ounce, of what isn't said.
Weighed, on a kit he bought; the seller's figure is to the ounce and holds it. One tungsten weight and two steel, as a standard H buffer (the maker's weight sheet: "H1 Buffer: T S S"), which BCM states at 3.8 oz.
The spring's weight1.64 oz ± 0.02 ozProvisionalPublished: Blowback9, Geissele Super 42 (an owner's write-up of an H1 kit he bought; his own measurements, no instrument named), a review, read Oct 12, 2026
Published “Weight: 1.64oz.” used
Blowback9, Geissele Super 42 (an owner's write-up of an H1 kit he bought; his own measurements, no instrument named), a review, read Oct 12, 2026 the page, harvested Oct 12, 2026
The spring as drawn (three strands of 0.045 wire, 26 coils) holds 1.6 oz of steel.
The buffer's length (the head's front face to the bumper's end)3.251 in ± 0.005 in 82.6 mmConflictWorked out: {std.carbine_buffer.length}
Worked out 3.251 in ± 0.005 in used
{std.carbine_buffer.length}, harvested
Published “Length: 3.427″ (same as normal buffer)”
Blowback9, Geissele Super 42 (an owner's write-up of an H1 kit he bought; his own measurements, no instrument named), a review, read Oct 12, 2026 the page, harvested Oct 12, 2026
He says it is a normal buffer's length, and a normal carbine buffer is 3.251 by the Army's drawings and the reference model. What his 3.427 spans isn't said (a bumper standing further out of one body would do it), and it is drawn as the buffer it is said to be the same as.
std and blowback9 differ by 0.176 in beyond what each states it is good to.
The buffer's diameter (its head, which runs in the extension's bore)0.98 in ± 0.005 in 24.9 mmConfirmedWorked out: {std.carbine_buffer.head_d}
Worked out 0.98 in ± 0.005 in used
{std.carbine_buffer.head_d}, harvested
The buffer's shoulder behind its head, which the spring's end coil sits over0.762 in ± 0.002 in 19.4 mmConflictPublished: Blowback9, Geissele Super 42 (an owner's write-up of an H1 kit he bought; his own measurements, no instrument named), a review, read Oct 12, 2026
Published ““Collar” diameter: 0.762″ (normal buffer = 0.781″)” used
Blowback9, Geissele Super 42 (an owner's write-up of an H1 kit he bought; his own measurements, no instrument named), a review, read Oct 12, 2026 the page, harvested Oct 12, 2026
Published “Geissele AR 15 Carbine 10 7/8" 27 0.6845" 0.7525" Std AR 15 Carbine 10 1/2 " 38 0.6835" 0.7765"”
survivalshop, 308AR.com forum, 21 Aug 2016: a table of his own measurements, the Geissele beside a standard carbine spring and buffer, a forum, read Oct 12, 2026 the page, harvested Oct 12, 2026
The table's last column, "buffer spring shoulder".
Published “diameter D1 is 0.76 inch. Notably, a standard buffer has a shoulder diameter of about 0.78 inch.”
US 9,829,260 B2, 'Buffer and spring assembly for a firearm' (WHG Properties, LLC; W. H. Geissele, K. Cannon): the description's example. The patent office's PDF has no text layer: read from its pages as pictures, the maker, read Oct 12, 2026 the page, harvested Oct 12, 2026
The maker's own patent; no marking page on file ties its number to the product, so its figures are an example's. They hang together with the product where it can be checked: its 0.76 shoulder is the 0.762 an owner measured.
Measured on the product, and the maker's patent has the same to the hundredth; the forum's is a hundredth under both, of a unit seven years older.
blowback9 and forum differ by 0.01 in beyond what each states it is good to.
forum and patent differ by 0.008 in beyond what each states it is good to.
What makes this buffer the spring's own. Geissele, on AR15.com: "We had to make the shoulder slightly smaller because of the braided wire design being 'thicker' than a single piece." A standard buffer's is 0.781.
The buffer's body diameter0.687 in ± 0.002 in 17.4 mmCorroboratedPublished: Blowback9, Geissele Super 42 (an owner's write-up of an H1 kit he bought; his own measurements, no instrument named), a review, read Oct 12, 2026
Published “Body diameter: 0.687″ (same as normal buffer)” used
Blowback9, Geissele Super 42 (an owner's write-up of an H1 kit he bought; his own measurements, no instrument named), a review, read Oct 12, 2026 the page, harvested Oct 12, 2026
Published “0.6845"”
survivalshop, 308AR.com forum, 21 Aug 2016: a table of his own measurements, the Geissele beside a standard carbine spring and buffer, a forum, read Oct 12, 2026 the page, harvested Oct 12, 2026
The table's "buffer main body" column; his standard buffer reads 0.6835 beside it.
The standard's own figure (std.carbine_buffer.body_d), which he says it is the same as; the forum's two bodies are a thousandth apart, 0.003 under it.
The spring's wire, how many strands3ConfirmedPublished: Geissele Automatics, Super 42 Braided Buffer Spring and Buffer Combo instructions (the maker's sheet, as a seller hosts it), the maker, read Oct 12, 2026
Published “Its unique spring design uses three independent strands of wire, just like the German MG42 Machine Gun.” used
Geissele Automatics, Super 42 Braided Buffer Spring and Buffer Combo instructions (the maker's sheet, as a seller hosts it), the maker, read Oct 12, 2026 the page, harvested Oct 12, 2026
The spring's wire, one strand's diameter0.045 in ± 0.0005 in 1.1 mmConfirmedPublished: US 9,829,260 B2, 'Buffer and spring assembly for a firearm' (WHG Properties, LLC; W. H. Geissele, K. Cannon): the description's example. The patent office's PDF has no text layer: read from its pages as pictures, the maker, read Oct 12, 2026
Published “0.045 inch diameter steel music wire” used
US 9,829,260 B2, 'Buffer and spring assembly for a firearm' (WHG Properties, LLC; W. H. Geissele, K. Cannon): the description's example. The patent office's PDF has no text layer: read from its pages as pictures, the maker, read Oct 12, 2026 the page, harvested Oct 12, 2026
The maker's own patent; no marking page on file ties its number to the product, so its figures are an example's. They hang together with the product where it can be checked: its 0.76 shoulder is the 0.762 an owner measured. Three such strands laid together like a rope are 0.097 in across, and 26 coils of them weigh 1.6 oz: the owner's measured 1.64.
The spring's wire, the length in which its strands turn once about each other0.475 in ± 0.005 in 12.1 mmConfirmedPublished: US 9,829,260 B2, 'Buffer and spring assembly for a firearm' (WHG Properties, LLC; W. H. Geissele, K. Cannon): the description's example. The patent office's PDF has no text layer: read from its pages as pictures, the maker, read Oct 12, 2026
Published “twist pitch of 0.475 inch” used
US 9,829,260 B2, 'Buffer and spring assembly for a firearm' (WHG Properties, LLC; W. H. Geissele, K. Cannon): the description's example. The patent office's PDF has no text layer: read from its pages as pictures, the maker, read Oct 12, 2026 the page, harvested Oct 12, 2026
The maker's own patent; no marking page on file ties its number to the product, so its figures are an example's. They hang together with the product where it can be checked: its 0.76 shoulder is the 0.762 an owner measured. ("or ... 2.1 twists per inch", the same.)
The spring's wire across all its strands0.097 in ± 0.002 in 2.5 mmConflictWorked out: {.strand_d} * 2.1547
Worked out 0.097 in ± 0.002 in used
{.strand_d} * 2.1547, harvested
Three round strands lying against each other: the circle round them is 1 + 2/√3 of one's diameter.
Published “Combined wire strands measured diameter: 0.105″”
Blowback9, Geissele Super 42 (an owner's write-up of an H1 kit he bought; his own measurements, no instrument named), a review, read Oct 12, 2026 the page, harvested Oct 12, 2026
What three strands of the patent's wire come to. An owner's jaws across a rope read 0.008 more: with his own outside diameter that leaves 0.700 inside, which wouldn't go over the 0.762 shoulder he measured on the buffer it is sold seated on.
strands and blowback9 differ by 0.008 in beyond what each states it is good to.
The spring's outside diameter0.95 in ± 0.005 in 24.1 mmConflictPublished: US 9,829,260 B2, 'Buffer and spring assembly for a firearm' (WHG Properties, LLC; W. H. Geissele, K. Cannon): the description's example. The patent office's PDF has no text layer: read from its pages as pictures, the maker, read Oct 12, 2026
Published “outside diameter D3 of 0.95 inch” used
US 9,829,260 B2, 'Buffer and spring assembly for a firearm' (WHG Properties, LLC; W. H. Geissele, K. Cannon): the description's example. The patent office's PDF has no text layer: read from its pages as pictures, the maker, read Oct 12, 2026 the page, harvested Oct 12, 2026
The maker's own patent; no marking page on file ties its number to the product, so its figures are an example's. They hang together with the product where it can be checked: its 0.76 shoulder is the 0.762 an owner measured. With its wire 0.097 across, 0.756 inside: on the 0.76 shoulder, as a spring that stays on its buffer is.
Published “Outer diameter: 0.910″”
Blowback9, Geissele Super 42 (an owner's write-up of an H1 kit he bought; his own measurements, no instrument named), a review, read Oct 12, 2026 the page, harvested Oct 12, 2026
Seller's side photo (bd3cd61e3456) has the spring 0.89 to 0.94 across by the buffer under it, which may not be at one scale with it.
What it has to fit decides: the spring is sold seated on a buffer whose shoulder is 0.762 (Primary Arms' photo of the two together), and 0.91 outside less the wire twice is 0.70 to 0.72 inside, which doesn't go over it. The patent's 0.95 does, and is inside the extension's inch.
patent and blowback9 differ by 0.04 in beyond what each states it is good to.
The spring's coils, end to end26 ± 1CorroboratedPhoto: Midwest Gun Works, 1500 px: the kit's spring square to its side on white, the buffer under it
Photo 26 count ± 1 count used
Midwest Gun Works, 1500 px: the kit's spring square to its side on white, the buffer under it, harvested
Scale: none: a count. Read by the crests of its outline along each side, 26 on one and 25 on the other
Published “Geissele AR 15 Carbine 10 7/8" 27”
survivalshop, 308AR.com forum, 21 Aug 2016: a table of his own measurements, the Geissele beside a standard carbine spring and buffer, a forum, read Oct 12, 2026 the page, harvested Oct 12, 2026
Counted, on both sides of the silhouette; an owner's 27 is inside its ±, and another's "Active coils: 23.5" is the same spring less its closed ends.
The spring's length out of the rifle11.125 in ± 0.06 in 282.6 mmConflictPublished: Blowback9, Geissele Super 42 (an owner's write-up of an H1 kit he bought; his own measurements, no instrument named), a review, read Oct 12, 2026
Published “Length uncompressed: 11.125″” used
Blowback9, Geissele Super 42 (an owner's write-up of an H1 kit he bought; his own measurements, no instrument named), a review, read Oct 12, 2026 the page, harvested Oct 12, 2026
Published “10 7/8"”
survivalshop, 308AR.com forum, 21 Aug 2016: a table of his own measurements, the Geissele beside a standard carbine spring and buffer, a forum, read Oct 12, 2026 the page, harvested Oct 12, 2026
Published “a free length of 11 inches and 24.5 active coils”
US 9,829,260 B2, 'Buffer and spring assembly for a firearm' (WHG Properties, LLC; W. H. Geissele, K. Cannon): the description's example. The patent office's PDF has no text layer: read from its pages as pictures, the maker, read Oct 12, 2026 the page, harvested Oct 12, 2026
The maker's own patent; no marking page on file ties its number to the product, so its figures are an example's. They hang together with the product where it can be checked: its 0.76 shoulder is the 0.762 an owner measured.
The later of two owners' measurements, a quarter of an inch apart, of two springs seven years apart; the patent's example is between them. Not drawn: the model is the spring as installed.
blowback9 and forum differ by 0.25 in beyond what each states it is good to.
The spring's length as installed (the buffer's seat to a mil-spec carbine extension's rear wall, bolt forward)6.972 in ± 0.03 in 177.1 mmProvisionalWorked out: {bcm-carbine-action-spring.installed_length}
Worked out 6.972 in ± 0.03 in used
{bcm-carbine-action-spring.installed_length}, harvested
The room a carbine spring has, whichever spring it is. The patent's example has 6.74 in for it.
What it goes with
By the way it mounts, and the figures each part on file states: a part whose figures say it doesn't fit is left out, and one whose fit can't be checked from what is published is marked. A check is against published figures, not a guarantee.
Receiver extension bore
- Receiver extensions
- BCM Milspec Carbine Receiver Extension (Buffer Tube) 6 Position, BCM MK2 Receiver Extension, Geissele Automatics Premium Mil-Spec Buffer Tube, Guntec USA AR-15 Mil-Spec Buffer Tube (Gen 2), SB Tactical SBPDW receiver extension, housing and integral castle nut, VLTOR RE-A5 7-Position Receiver Extension, MilSpec Diameter
Prices on file
Each seller's latest reading of its own page: before tax and shipping, and not a quote. The pages are read again every night.
- GRITR Sports $71.99 Nov 21, 2026, in stock that day
- AR15Discounts $75.00 Nov 21, 2026, in stock that day
- Impact Guns $79.29 Nov 21, 2026, in stock that day
- Mile High Shooting Accessories $85.00 Nov 21, 2026, in stock that day
- Primary Arms $85.00 Nov 21, 2026, in stock that day
- Midwest Gun Works $85.00 Nov 21, 2026, in stock that day
- MidwayUSA $85.00 Nov 21, 2026, in stock that day
- Alexander's Store $85.00 Nov 18, 2026, in stock that day