Buffer
Guntec USA AR-15 Mil-Spec Car Buffer
The buffer in Guntec's mil-spec buffer tube set, also sold alone: the weight inside the receiver extension that the bolt carrier pushes back against. Guntec: "CAR/M4 Mil-Spec Buffer", "Steel Weights", "3.0 oz weight", "Aluminum Body, White Neoprene Head". The user, who owns the set, of the buffer in theirs (2026-10-20): "Gold, white bumper". The set's sellers: "Includes End Plate, Castle Nut, 3 oz CAR Buffer, & Upgraded Chrome Silicon Spring" (The Country Shed).

- Weight
- 3 oz ± 0.05 oz Confirmedpublished: Guntec USA, AR-15 Mil-Spec Car Buffer, CARBUF, its description ("CAR/M4 Mil-Spec Buffer Steel Weights 3.0 oz weight Aluminum Body, White Neoprene Head"); the page as the user saved it, a copy on file, the maker, read Oct 20, 2026
- Lowest price
- $19.95 at Midwest Gun Works, read Nov 21, 2026
- Maker's number
- CARBUF
- Colour
- Guntec buffer, champagne anodize
- Drawn as
- modelled
- Maker's page
- guntecusa.com
In “BCM 16 in mid-length”, a build on the start page, in place of its BCM Carbine Buffer.
Its figures
Every figure the site draws and checks it by, with where it came from. Open one for each source's reading, and why one is used where they differ.
Length (the head's front face to the bumper's end)3.42 in ± 0.08 in 86.9 mmConflictPhoto: The Country Shed's copy of Guntec's own layout picture of the red set, MILTUBESET-RED, 600 px: the tube, end plate, castle nut, buffer and spring laid out on white and photographed square on from above; its buffer has this one's white bumper and flanged head, in a black body: taken for this buffer in an earlier finish
Photo 3.42 in ± 0.08 in used
The Country Shed's copy of Guntec's own layout picture of the red set, MILTUBESET-RED, 600 px: the tube, end plate, castle nut, buffer and spring laid out on white and photographed square on from above; its buffer has this one's white bumper and flanged head, in a black body: taken for this buffer in an earlier finish, harvested
Scale: the set's tube lying beside it in the same plane, 278 px for its 7.25 in (guntec-ar15-mil-spec-buffer-tube-gen-2.tube_length): 38.3 px/in; its body's 55 px for 1.448 in overall height and its thread's 44 px for 1.148 in give 38.0 and 38.3. Read by the buffer's silhouette on a 4x enlargement, the white bumper's tip to the head's face, 132 px; its head reads 36.5 px across, 0.95 in, where the standard's is 0.98. The ± is 3 px at each end of a small picture
Photo 3.39 in ± 0.07 in
Midwest Gun Works' picture of Guntec's carbine buffer sold alone, CARBUF.jpg, 1500 px: square on from the side, head to the left, on white, harvested
Scale: its own diameters as the standard's: the head (std.carbine_buffer.head_d 0.98) 350 px, the step the spring sits over (pilot_d 0.781) 283 px, the body (body_d 0.687) 240 px: 357, 362 and 349 px/in. Read by the silhouette's length along its axis, 1206 px, the head's face to the bumper's tip: 3.38 in by the head, 3.33 by the step and 3.45 by the body; the ± spans the three. The picture is turned about 1 degree and shows a sliver of the head's face (15 px), which the ± covers
Worked out 3.251 in ± 0.005 in
{std.carbine_buffer.length}, harvested
The standard carbine buffer's, which a seller's "Mil-Spec" gives it (Midwest Gun Works: "This Mil-Spec aluminum constructed buffer is manufactured by Guntec for the AR-15 carbine platform").
Two photographs of Guntec's buffer, one scaled by the tube lying beside it and one by the buffer's own standard diameters, agree within their ± (3.42 and 3.39) and are 0.14 to 0.17 in longer than the standard's 3.251, more than either's ±. A seller's "Mil-Spec" is a word for the buffer, not a length; no page states one. The tube-scaled reading is adopted: it rests on nothing of the buffer's own.
layout and std differ by 0.169 in beyond what each states it is good to.
carbuf-photo and std differ by 0.139 in beyond what each states it is good to.
Its body's length (the head's front face to the bumper's seat)3.02 in ± 0.08 in 76.7 mmProvisionalWorked out: {.length} - {std.carbine_buffer.bumper_exposed}
Worked out 3.02 in ± 0.08 in used
{.length} - {std.carbine_buffer.bumper_exposed}, harvested
What the model's body is drawn to: the length less the standard bumper standing out of it. The CARBUF photo's bumper stands 148 px out of its body, 0.42 in at the body's scale, where the standard's is 0.40.
Diameter (its head, which runs in the extension's bore)0.98 in ± 0.005 in 24.9 mmConfirmedWorked out: {std.carbine_buffer.head_d}
Worked out 0.98 in ± 0.005 in used
{std.carbine_buffer.head_d}, harvested
The standard's, by a seller's "Mil-Spec". The layout picture (53eee351ef23) reads its head 0.95 in across at the tube's scale, within that small picture's ± of 3 px (0.08 in).
What it goes with
By the way it mounts, and the figures each part on file states: a part whose figures say it doesn't fit is left out, and one whose fit can't be checked from what is published is marked. A check is against published figures, not a guarantee.
Receiver extension bore
- Receiver extensions
- BCM Milspec Carbine Receiver Extension (Buffer Tube) 6 Position, BCM MK2 Receiver Extension, Geissele Automatics Premium Mil-Spec Buffer Tube, Guntec USA AR-15 Mil-Spec Buffer Tube (Gen 2), SB Tactical SBPDW receiver extension, housing and integral castle nut, VLTOR RE-A5 7-Position Receiver Extension, MilSpec Diameter
Prices on file
Each seller's latest reading of its own page: before tax and shipping, and not a quote. The pages are read again every night.
- Midwest Gun Works $19.95 Nov 21, 2026, in stock that day
- Guntec USA $19.95 Oct 20, 2026, in stock that day