Buffer spring
BCM Rifle M16 Action Spring
The M16 rifle's action spring, longer than a carbine's and with more coils. BCM: "Action spring for M16, M16A1, M16A2, M16A3, M16A4. For use with a full size M16 Rifle buffer and full size rifle M16 receiver extension." It is also the spring of BCM's MK2 recoil mitigation system: its MK2 kits list a "Mil-Spec M16A4 rifle action spring" with "more spring coils than M4 carbine", and its MK2 buffer "ONLY works in conjunction with the BCM MK2 Receiver Extension (BCM part #BCM-MK2-RE) and the Mil-Spec Rifle M16 Action Spring (BCM part # SPRING-RIFLE-M16-ACTION)".

- Weight
- 2.2 oz ± 0.15 oz Provisionalworked out: 3.14159265 * ({.od} - {.wire_d}) * {.coils} * 0.785398163 * {.wire_d} * {.wire_d} * {std.density.steel}
- Lowest price
- $4.50 at BCM, read Nov 21, 2026
- Maker's number
- SPRING-RIFLE-M16-ACTION
- Colour
- Natural stainless
- Drawn as
- modelled
- Maker's page
- bravocompanyusa.com
In “Drop-in 16 in, Stealth Gray on BCM's MK2 lower”, a build on the start page, as it is.
Its figures
Every figure the site draws and checks it by, with where it came from. Open one for each source's reading, and why one is used where they differ.
Wire diameter0.072 in ± 0.001 in 1.8 mmConfirmedStandard: US Army TDP drawing 8448629 (Spring, Action), rev C, PDF page 36, spring data; user-supplied scan (a copy on file), crops in a working script
Standard “WIRE DIA: .072±.001” used
US Army TDP drawing 8448629 (Spring, Action), rev C, PDF page 36, spring data; user-supplied scan (a copy on file), crops in a working script, from the site owner
Outside diameter of its coils0.94 in ± 0.015 in 23.9 mmConfirmedStandard: US Army TDP drawing 8448629 (Spring, Action), rev C, PDF page 36; user-supplied scan, crops in a working script
Standard “.940 DIA±.015” used
US Army TDP drawing 8448629 (Spring, Action), rev C, PDF page 36; user-supplied scan, crops in a working script, from the site owner
Photo 0.926 in ± 0.03 in
BCM's MK2 stock kit on white, from above, 1000 x 667, harvested
Scale: the MK2 tube beside it, 525.5 px for its 7.955 in (bcm-mk2-receiver-extension.tube_length): 66.06 px/in. Read by the coils' width across the middle fifth of its length, 61.2 px
A wire two pixels thick: its edge's blur takes a pixel or two off the width.
The Army's drawing; BCM's photo agrees within its ±.
Outside diameter of the one reduced coil at each end0.9 in ± 0.015 in 22.9 mmConfirmedStandard: US Army TDP drawing 8448629 (Spring, Action), rev C, PDF page 36; user-supplied scan, crops in a working script
Standard “.900 DIA±.015 REDUCE (1) COIL BOTH ENDS” used
US Army TDP drawing 8448629 (Spring, Action), rev C, PDF page 36; user-supplied scan, crops in a working script, from the site owner
Free length12.5 in ± 0.05 in 317.5 mmConfirmedStandard: US Army TDP drawing 8448629 (Spring, Action), rev C, PDF page 36; user-supplied scan, crops in a working script
Standard “12.50 FREE LENGTH AFTER SETTING, REF” used
US Army TDP drawing 8448629 (Spring, Action), rev C, PDF page 36; user-supplied scan, crops in a working script, from the site owner
A reference figure (REF): the drawing holds the spring to its loads (load_operating, load_assembled), not to this.
Photo 12.48 in ± 0.08 in
BCM's MK2 stock kit on white, from above, 1000 x 667, harvested
Scale: the MK2 tube beside it, 525.5 px for its 7.955 in (bcm-mk2-receiver-extension.tube_length, read on BCM's side photo at the scale of its own thread): 66.06 px/in. Read by its length along its principal axis, 824.7 px
Photo 12.8 in ± 0.4 in
BCM's Spring_Rifle_M16_Action-2: the whole spring on white, lying on the diagonal, 1024 x 1024, harvested
Scale: the spring's own width in the middle fifth of its length, 76.7 px, as the drawing's .940 outside diameter: 81.6 px/in. Read by its length along its principal axis, 1041.7 px; at its widest (84.1 px) the same length is 11.6 in, which the ± covers
The Army's drawing of the M16 spring; BCM's photo of it beside a tube of known length has it to 0.02 in.
Total coils44 ± 1CorroboratedPhoto: BCM's photo of the spring on white, 1024 x 1024) and a copy on file (BCM's MK2 stock kit, the spring free beside the tube
Photo 43.5 count ± 1 count used
BCM's photo of the spring on white, 1024 x 1024) and a copy on file (BCM's MK2 stock kit, the spring free beside the tube, harvested
Scale: none: a count. Read by the crests of the outline along each side of its axis: 42 and 43 on BCM's own photo, where one side has a gap of 43 px at a 24 px spacing (a crest missed: 43); 43 and 44 on the kit photo, 19 px apart
Standard “TOTAL COILS: 44 REF”
US Army TDP drawing 8448629 (Spring, Action), rev C, PDF page 36, spring data; user-supplied scan, crops in a working script, from the site owner
Counted on BCM's own springs, as the carbine spring's coils are; the Army's 44 is a reference figure and within the count's ±.
Solid length (every coil touching)3.285 in 83.4 mmConfirmedStandard: US Army TDP drawing 8448629 (Spring, Action), rev C, PDF page 36, spring data; user-supplied scan, crops in a working script
Standard “SOLID LENGTH: 3.285 MAX” used
US Army TDP drawing 8448629 (Spring, Action), rev C, PDF page 36, spring data; user-supplied scan, crops in a working script, from the site owner
A maximum, not drawn: what the spring can't be compressed past.
Its mean assembled length in the M16 rifle (bolt forward)8.19 in ± 0.005 in 208 mmConfirmedStandard: US Army TDP drawing 8448629 (Spring, Action), rev C, PDF page 36, spring data; user-supplied scan, crops in a working script
Standard “LOAD AT COMPRESSED LG OF 8.190 MEAN ASSEMBLED LENGTH = 5.8 LBS±.5 LBS” used
US Army TDP drawing 8448629 (Spring, Action), rev C, PDF page 36, spring data; user-supplied scan, crops in a working script, from the site owner
In the M16 rifle's own extension, which this spring was drawn for; not its length in the MK2 tube (installed_length).
Its length as drawn: in BCM's MK2 tube, from the MK2 buffer's seat to the tube's rear wall, bolt forward7.677 in ± 0.06 in 195 mmProvisionalWorked out: {bcm-mk2-receiver-extension.tube_front_behind_pin} + {bcm-mk2-receiver-extension.tube_length} - {bcm-mk2-receiver-extension.rear_wall} + {std.ar15.upper_rear_face_x} - {bcm-mk2-buffer-t0.head_thickness}
Worked out 7.677 in ± 0.06 in used
{bcm-mk2-receiver-extension.tube_front_behind_pin} + {bcm-mk2-receiver-extension.tube_length} - {bcm-mk2-receiver-extension.rear_wall} + {std.ar15.upper_rear_face_x} - {bcm-mk2-buffer-t0.head_thickness}, harvested
What the spring is drawn at: the system BCM sells it in with this batch (its MK2 kits: "Mil-Spec M16A4 rifle action spring"). The MK2 buffer's face rests at the upper receiver's rear face (the carrier's rear end, bolt forward); the spring bears on the rear face of the buffer's head and on the tube's rear wall inside. 0.51 in shorter than the M16 rifle's mean assembled length (assembled_length_rifle).
What it goes with
By the way it mounts, and the figures each part on file states: a part whose figures say it doesn't fit is left out, and one whose fit can't be checked from what is published is marked. A check is against published figures, not a guarantee.
Receiver extension bore
- Receiver extensions
- BCM Milspec Carbine Receiver Extension (Buffer Tube) 6 Position, BCM MK2 Receiver Extension, Geissele Automatics Premium Mil-Spec Buffer Tube, Guntec USA AR-15 Mil-Spec Buffer Tube (Gen 2), SB Tactical SBPDW receiver extension, housing and integral castle nut, VLTOR RE-A5 7-Position Receiver Extension, MilSpec Diameter
Prices on file
Each seller's latest reading of its own page: before tax and shipping, and not a quote. The pages are read again every night.
- BCM $4.50 Nov 21, 2026, in stock that day