Buffer
Panzer Arms AR57 proprietary carbine buffer
The heavier carbine buffer the AR57 upper comes with and needs: "The upper arrives with a custom buffer that fits any carbine AR15 lower" (Small Arms Review); "proprietary carbine buffer" (Classic Firearms); a buyer on Primary Arms' page: "You must put in the heavier buffer weight that ships with the gun. (4.8 ounces) vs the standard 3oz." Not sold on its own.

- Weight
- 4.8 oz ± 0.05 oz Provisionalpublished: A buyer's review on Primary Arms' page for the AR57 16 in upper (Hoosier Carry, 2024-03-09, of the 12 in), a review, read Oct 18, 2026
- Lowest price
- Sold in the Panzer Arms AR57 ULT Complete AR-15 Upper Receiver - 5.7x28mm - 12", not by itself
- Colour
- Black (placeholder)
- Drawn as
- modelled
In “AR57 16 in, 5.7x28”, a build on the start page, as it is.
Its figures
Every figure the site draws and checks it by, with where it came from. Open one for each source's reading, and why one is used where they differ.
Length (the head's front face to the bumper's end)3.251 in ± 0.005 in 82.6 mmProvisionalWorked out: {std.carbine_buffer.length}
Worked out 3.251 in ± 0.005 in used
{std.carbine_buffer.length}, harvested
AN APPROXIMATION: the standard carbine buffer's length. No page gives this buffer's and no photo of it is on file; it goes in a carbine extension with the standard spring (Small Arms Review: "fits any carbine AR15 lower").
Diameter (its head, which runs in the extension's bore)0.98 in ± 0.005 in 24.9 mmConfirmedWorked out: {std.carbine_buffer.head_d}
Worked out 0.98 in ± 0.005 in used
{std.carbine_buffer.head_d}, harvested
AN APPROXIMATION: the standard carbine buffer's head. It runs in a carbine extension's bore as every carbine buffer does.
What it goes with
By the way it mounts, and the figures each part on file states: a part whose figures say it doesn't fit is left out, and one whose fit can't be checked from what is published is marked. A check is against published figures, not a guarantee.
Receiver extension bore
- Receiver extensions
- BCM Milspec Carbine Receiver Extension (Buffer Tube) 6 Position, BCM MK2 Receiver Extension, Geissele Automatics Premium Mil-Spec Buffer Tube, Guntec USA AR-15 Mil-Spec Buffer Tube (Gen 2), SB Tactical SBPDW receiver extension, housing and integral castle nut, VLTOR RE-A5 7-Position Receiver Extension, MilSpec Diameter