Stock
Magpul CTR carbine stock, mil-spec
Magpul's A-frame carbine stock with a friction lock under the tube that takes up its play on the receiver extension, a push-button QD sling socket, and a 0.3 in rubber butt pad. The MOE Carbine is this stock without the lock and the socket; Magpul lists both at the same size and length of pull.

- Weight
- 8.9 oz Conflictpublished: Magpul, CTR Carbine Stock - Mil-Spec (MAG310), the maker, read Oct 1, 2026Its sources span 8.85 oz to 9.08 oz.
- Lowest price
- $64.95 at Wing Tactical, read Nov 21, 2026
- Maker's number
- MAG310
- Colours
- Black, FDE, Modified Coyote Brown, ODG, Stealth Gray
- Drawn as
- modelled
In “22RB suppressed, FDE”, a build on the start page, as it is.
Its figures
Every figure the site draws and checks it by, with where it came from. Open one for each source's reading, and why one is used where they differ.
Overall length7 in ± 0.05 in 177.8 mmConfirmedPublished: Magpul, CTR Carbine Stock - Mil-Spec (MAG310), the maker, read Oct 1, 2026
Published “Length, max 7.0 in.” used
Magpul, CTR Carbine Stock - Mil-Spec (MAG310), the maker, read Oct 1, 2026 the page, harvested Oct 1, 2026
Published “Length, max 6.9 in.”
Big Tex Ordnance, CTR Carbine Stock, Mil-Spec (Magpul's earlier table, copied), a seller, read Oct 1, 2026 the page, harvested Oct 1, 2026
Published “Length: 6.9"”
Wing Tactical, Magpul CTR Stock (MAG310), a seller, read Oct 1, 2026 the page, harvested Oct 1, 2026
Magpul's current page. Retailers carry 6.9, Magpul's earlier figure; the oldest table (Operation Parts) gives the body with a plain butt cap as 6.60 and adds 0.30 for the rubber pad.
Height5.2 in 132.1 mmConfirmedPublished: Magpul, CTR Carbine Stock - Mil-Spec (MAG310), the maker, read Oct 1, 2026
Published “Height, max 5.2 in.” used
Magpul, CTR Carbine Stock - Mil-Spec (MAG310), the maker, read Oct 1, 2026 the page, harvested Oct 1, 2026
Published “Height: 5.2"”
Wing Tactical, Magpul CTR Stock (MAG310), a seller, read Oct 1, 2026 the page, harvested Oct 1, 2026
Manufacturer; the retailer repeats it.
Width1.7 in 43.2 mmConfirmedPublished: Magpul, CTR Carbine Stock - Mil-Spec (MAG310), the maker, read Oct 1, 2026
Published “Width, max 1.7 in.” used
Magpul, CTR Carbine Stock - Mil-Spec (MAG310), the maker, read Oct 1, 2026 the page, harvested Oct 1, 2026
Published “Width: 1.7"”
Wing Tactical, Magpul CTR Stock (MAG310), a seller, read Oct 1, 2026 the page, harvested Oct 1, 2026
Manufacturer; the retailer repeats it.
Weight with a receiver extension (the maker's own tube)12.7 ozConfirmedPublished: Magpul, CTR Carbine Stock - Mil-Spec (MAG310), the maker, read Oct 1, 2026
Published “Weight, w/ receiver extension ~12.7 oz” used
Magpul, CTR Carbine Stock - Mil-Spec (MAG310), the maker, read Oct 1, 2026 the page, harvested Oct 1, 2026
Published “Weight, w/ receiver extension 12.8 oz”
Big Tex Ordnance, CTR Carbine Stock, Mil-Spec (Magpul's earlier table, copied), a seller, read Oct 1, 2026 the page, harvested Oct 1, 2026
Magpul's current page; the earlier table's figure is 0.1 oz more.
Not used by the build, which weighs its own buffer kit. Kept because it says what Magpul takes a mil-spec carbine receiver extension to weigh: 3.8 oz (12.7 less 8.9), or 4.0 by the earlier table.
Length of pull, collapsed (the maker's reference rifle)10.3 in 261.6 mmConflictPublished: Magpul, CTR Carbine Stock - Mil-Spec (MAG310), the maker, read Oct 1, 2026
Published “LOP, M4 Collapsed ~10.3 in.” used
Magpul, CTR Carbine Stock - Mil-Spec (MAG310), the maker, read Oct 1, 2026 the page, harvested Oct 1, 2026
Published “LOP, M4 Collapsed ~10.5 in.”
Big Tex Ordnance, CTR Carbine Stock, Mil-Spec (Magpul's earlier table, copied), a seller, read Oct 1, 2026 the page, harvested Oct 1, 2026
Published “LOP M4 Collapsed: ~10.7 in.”
Scheels, Magpul CTR Carbine Stock - Mil-Spec, a seller, read Oct 1, 2026 the page, harvested Oct 1, 2026
Magpul's current page. Retailers carry two earlier figures of Magpul's, 0.2 and 0.4 in longer.
magpul and big-tex differ by 0.2 in beyond what each states it is good to.
magpul and scheels differ by 0.4 in beyond what each states it is good to.
big-tex and scheels differ by 0.2 in beyond what each states it is good to.
Magpul has published three figures for it with the rubber pad, the same three as for the MOE Carbine (10.7, 10.5, 10.3), and a fourth without: Operation Parts carries the oldest table, 10.1 in with a plain butt cap, "Rubber Butt-Pad adds 0.30 in. LOP". It isn't what seats the stock (butt_behind_pin_pos1).
Length of pull, extended (the maker's reference rifle)13.6 in 345.4 mmConflictPublished: Magpul, CTR Carbine Stock - Mil-Spec (MAG310), the maker, read Oct 1, 2026
Published “LOP, M4 Extended ~13.6 in.” used
Magpul, CTR Carbine Stock - Mil-Spec (MAG310), the maker, read Oct 1, 2026 the page, harvested Oct 1, 2026
Published “LOP, M4 Extended ~13.8 in.”
Big Tex Ordnance, CTR Carbine Stock, Mil-Spec (Magpul's earlier table, copied), a seller, read Oct 1, 2026 the page, harvested Oct 1, 2026
Published “LOP M4 Extended: ~14.0 in.”
Scheels, Magpul CTR Carbine Stock - Mil-Spec, a seller, read Oct 1, 2026 the page, harvested Oct 1, 2026
Magpul's current page; the earlier figures move with the collapsed ones (the range is 3.3 in each time).
magpul and big-tex differ by 0.2 in beyond what each states it is good to.
magpul and scheels differ by 0.4 in beyond what each states it is good to.
big-tex and scheels differ by 0.2 in beyond what each states it is good to.
Length-of-pull adjustment range3.3 in 83.8 mmConfirmedPublished: Magpul, CTR Carbine Stock - Mil-Spec (MAG310), the maker, read Oct 1, 2026
Published “LOP Adjustment Range 3.3 in.” used
Magpul, CTR Carbine Stock - Mil-Spec (MAG310), the maker, read Oct 1, 2026 the page, harvested Oct 1, 2026
Worked out 3.3 in
{.lop_extended} - {.lop_collapsed}, harvested
Stated; the two lengths of pull differ by it.
Rubber butt pad, thickness0.3 in 7.6 mmConfirmedPublished: Magpul, CTR Carbine Stock - Mil-Spec (MAG310), the maker, read Oct 1, 2026
Published “Removable 0.3" Rubber Butt-Pad offers an anti-slip surface and increases impact protection” used
Magpul, CTR Carbine Stock - Mil-Spec (MAG310), the maker, read Oct 1, 2026 the page, harvested Oct 1, 2026
Tube axis below the stock's top edge (at its highest)0.72 in ± 0.02 in 18.3 mmCorroboratedPhoto: Magpul: the CTR on a rifle, right side, close, 1200 px
Photo 0.72 in ± 0.02 in used
Magpul: the CTR on a rifle, right side, close, 1200 px, harvested
Scale: the stock's own length, 829.1 px from the butt pad's rearmost point to the front face for Magpul's 7.0 in: 118.4 px/in (its height, 619 px for 5.2 in, gives 119.1). Not the tube's diameter: it reads 132.8 px, 1.12 in. Read by the bare tube's axis, midway between its limbs (row 405.0 over columns 1090 to 1120), below the cheek's top line carried forward along its own slope (325.7 there): 79.3 px; and the hump stands 6.2 px above that line (318.4 at column 160): 85.5 px
Photo 0.695 in ± 0.03 in
Magpul: the CTR on a whole rifle, straight right side, 1200 x 1200, harvested
Scale: the receiver's Picatinny rail, nine slots at 12.90 px (std.picatinny.slot_pitch): 32.6 px/in; the pins give 32.7. Read by the exposed tube's axis, midway between its limbs (row 568.5 over columns 288 to 306; the rifle lies level), below the cheek's top line (547.5): 21.0 px, 0.644 in. The hump isn't resolved at this size: the traced outline's 0.051 in is added
The tube itself in the stock at three times the resolution; the whole-rifle photo agrees within the two ±. The MOE Carbine reads 0.706 the same way.
The highest point is the hump at the butt, 0.05 in above the cheek's top line (the side outline's y = 0), as on the MOE Carbine.
Width of the frame below the tube: the upright, the strut and the brace0.69 in ± 0.08 in 17.5 mmProvisionalWorked out: {magpul-moe-carbine.frame_width}
Worked out 0.69 in ± 0.08 in used
{magpul-moe-carbine.frame_width}, harvested
No end view of the CTR was found. The MOE Carbine's, from its design patent, stands in: the same A-frame by Magpul's description and published sizes.
Lock pin behind the stock's front face2.34 in ± 0.04 in 59.4 mmProvisionalPhoto: Magpul: the CTR on a rifle, right side, close, 1200 px
Photo 2.34 in ± 0.04 in used
Magpul: the CTR on a rifle, right side, close, 1200 px, harvested
Scale: the stock's own length, 829.1 px for Magpul's 7.0 in: 118.4 px/in (its height gives 119.1). Read by the pin's round head (columns 631 to 656) and the shaft under it, centred 277.8 px behind the front face (column 921.5)
The steel pin the latch draws out of the receiver extension's holes; its lower end shows in the slot beside the latch. The MOE Carbine's stands 2.37 in behind its front: the same latch, so at one hole the two stocks' fronts are in one place.
Butt behind the takedown pin as Magpul photographed it: three steps out (position 4)10.456 in ± 0.084 in 265.6 mmProvisionalPhoto: Magpul: the CTR on a whole rifle, straight right side, 1200 x 1200
Photo 10.456 in ± 0.084 in used
Magpul: the CTR on a whole rifle, straight right side, 1200 x 1200, harvested
Scale: frame from the reviewed holes takedown, pivot, selector (32.7 px/in, rms 0.002 in over 3 points). Read by −x of the fitted profile's origin of the traced outline (tools/trace.py); the traced side outline's origin (the butt pad's rearmost point), fitted by rotation and translation at the outline's own scale to the stock's edges against the background
Which position it is in: its front face stands 1.91 in behind the castle nut here and 1.98 in in Magpul's closer view (3a0618e87fb5): three steps (3 × 0.66). The same rifle and tube as the MOE Carbine's photos, where that stock is two steps out.
Butt behind the takedown pin at position 1 (collapsed), on a carbine receiver extension8.726 in ± 0.09 in 221.6 mmConflictWorked out: {magpul-moe-carbine.butt_behind_pin_pos1} - {magpul-moe-carbine.length} + {magpul-moe-carbine.lock_pin_behind_front} - {.lock_pin_behind_front} + {.length}
Worked out 8.726 in ± 0.09 in used
{magpul-moe-carbine.butt_behind_pin_pos1} - {magpul-moe-carbine.length} + {magpul-moe-carbine.lock_pin_behind_front} - {.lock_pin_behind_front} + {.length}, harvested
The MOE Carbine's front at the same hole, moved by the difference between the two lock pins' places, plus this stock's length. ± is the MOE Carbine's seat's and the two pins'.
Worked out 8.839 in ± 0.07 in
{bcm-receiver-extension.tube_front_behind_pin} + {bcm-receiver-extension.tube_length} - {bcm-receiver-extension.position_hole_rear_from_rear} - 5 * {bcm-receiver-extension.position_step} - {.lock_pin_behind_front} + {.length}, harvested
The lock pin in the tube's front hole. ± for the hole's place (0.03), the tube's seat (0.02) and the pin's (0.04), and for the tube's length, which is a generic figure.
Worked out 8.476 in ± 0.084 in
{.butt_behind_pin_pos4} - 3 * {.lop_range} / 5, harvested
Three of the five steps of Magpul's 3.3 in range. ± is the photo's alone.
Its own photo, three steps out, would put the stock's front inside the castle nut. The MOE Carbine's seat, from the same rifle one step nearer, clears the nut, the two stocks share their latch, and the tube's holes agree with it within the two ±.
from-moe and installed differ by 0.25 in beyond what each states it is good to.
holes and installed differ by 0.363 in beyond what each states it is good to.
Its own photo, less its three steps, puts its front face 0.16 in inside the castle nut (bcm-castle-nut.rear_face_behind_pin): three steps carry the photo's ± and any difference between that rifle's tube and 0.66 in a hole, and a stock has play in each hole (Magpul's two photos of each stock differ by 0.1 in on where it sits behind the nut). So it is seated with the MOE Carbine, measured the same way one step nearer: the two stocks' lock pins stand the same distance behind their fronts (2.34 and 2.37 in), and Magpul lists the same lengths of pull for both in every revision.
The bore for the receiver extension (the MOE Carbine's, standing in)1.158 in ± 0.04 in 29.4 mmProvisionalWorked out: {magpul-moe-carbine.bore_diameter}
Worked out 1.158 in ± 0.04 in used
{magpul-moe-carbine.bore_diameter}, harvested
No end view of the CTR was found. The MOE Carbine's bore, read on its design patent, stands in, as its section and its frame's width do: both are Magpul's Mil-Spec carbine stocks, for the same tube (std.receiver_extension.milspec_od, 1.148).
Width of the channel under the bore, for the receiver extension's indexing rail0.49 in ± 0.005 in 12.4 mmConfirmedWorked out: {magpul-moe-carbine.rail_channel_width}
Worked out 0.49 in ± 0.005 in used
{magpul-moe-carbine.rail_channel_width}, harvested
Not read from this stock: the MOE Carbine's, which is the mil-spec tube's rail at its own width, with nothing to spare (no clearance is known).
Floor of the indexing rail's channel, below the tube axis0.874 in ± 0.005 in 22.2 mmCorroboratedWorked out: {magpul-moe-carbine.rail_channel_floor_below_axis}
Worked out 0.874 in ± 0.005 in used
{magpul-moe-carbine.rail_channel_floor_below_axis}, harvested
Not read from this stock: the MOE Carbine's, which is where the mil-spec tube's rail ends below its axis, with nothing to spare (no clearance is known).
What it goes with
By the way it mounts, and the figures each part on file states: a part whose figures say it doesn't fit is left out, and one whose fit can't be checked from what is published is marked. A check is against published figures, not a guarantee.
Receiver extension (buffer tube)
Prices on file
Each seller's latest reading of its own page: before tax and shipping, and not a quote. The pages are read again every night.
- Wing Tactical $64.95 Nov 21, 2026, in stock that day
- Primary Arms $66.45 Black Nov 21, 2026, in stock that day
- Primary Arms $66.45 Modified Coyote Brown Nov 21, 2026, in stock that day
- Magpul $69.95 Nov 21, 2026, stock not said
- Academy Sports + Outdoors $69.99 Black Nov 10, 2026, in stock that day