Folding stock adapter
Law Tactical AR Folding Stock Adapter GEN-S
A hinge between the lower receiver and the buffer tube: press its button and the tube and stock swing to the rifle's left; unfolded they lock straight again. It moves the tube back 1.3 in, and a bolt carrier extension in the carrier's tail makes up the length. Law Tactical: "Combining all of the proven features of the Gen 3-M with Stronger, Lighter, Smaller and Stainless Steel design", "17-4 Stainless Steel Housing ... DLC Coated"; its instructions: "Always close stock (unfold) before firing. The AR is not designed to be fired from the folded position."

- Weight
- 9.4 oz ± 0.1 oz Conflictworked out: {.housing_weight} + {.extension_weight}Its sources span 8.5 oz to 9.5 oz.
- Lowest price
- $249.99 at AR15Discounts, read Nov 21, 2026 (Black)
- Maker's number
- 99312
- Colour
- Black nitride
- Drawn as
- modelled
- Maker's page
- lawtactical.com
In “BCM 11.5 in pistol on a Law GEN-S”, a build on the start page, as it is.
Its figures
Every figure the site draws and checks it by, with where it came from. Open one for each source's reading, and why one is used where they differ.
Housing weight (the hinge assembly)7.4 oz ± 0.05 ozConfirmedPublished: Law Tactical, AR Folding Stock Adapter GEN-S (the page at the Gen 3-M's address: "PRODUCT CODE: 99312"), GEN-S SPECIFICATIONS, the maker, read Oct 18, 2026
Published “GEN-S SPECIFICATIONS Housing Weight: 7.4 oz Bolt Carrier Extension: 2 oz Adds 1.3 inches to length of pull CNC Machined 17-4 Steel” used
Law Tactical, AR Folding Stock Adapter GEN-S (the page at the Gen 3-M's address: "PRODUCT CODE: 99312"), GEN-S SPECIFICATIONS, the maker, read Oct 18, 2026 the page, harvested Oct 18, 2026
Published “GEN-S SPECIFICATIONS Housing Weight: 7.4 oz Bolt Carrier Extension: 2oz Adds 1.3 inches to Length of Pull 17-4 Stainless Steel Housing”
Law Tactical, AR Folding Stock Adapter GEN-S data sheet (linked from the maker's page as its Data Sheet; one page with no text layer, read as a picture; the same sheet as GEN3S-web-one-sheet.jpg), GEN-S SPECIFICATIONS, the maker, read Oct 18, 2026 the page, harvested Oct 18, 2026
Published “Housing Weight: 7.4 oz Bolt Carrier Extension: 2 oz Adds 1.3 inches to length of pull CNC machined 17-4 Steel”
Wilson Combat, STOCK ADAPTOR, LAW TACTICAL, AR, GEN-S, FOLDING (item NW809), Feautures, a seller, read Oct 18, 2026 the page, harvested Oct 18, 2026
The maker's page; its data sheet and a seller quoting it give the same.
Bolt carrier extension weight2 oz ± 0.5 ozConfirmedPublished: Law Tactical, AR Folding Stock Adapter GEN-S (the page at the Gen 3-M's address: "PRODUCT CODE: 99312"), GEN-S SPECIFICATIONS, the maker, read Oct 18, 2026
Published “Bolt Carrier Extension: 2 oz” used
Law Tactical, AR Folding Stock Adapter GEN-S (the page at the Gen 3-M's address: "PRODUCT CODE: 99312"), GEN-S SPECIFICATIONS, the maker, read Oct 18, 2026 the page, harvested Oct 18, 2026
Published “Bolt Carrier Extension: 2oz”
Law Tactical, AR Folding Stock Adapter GEN-S data sheet (linked from the maker's page as its Data Sheet; one page with no text layer, read as a picture; the same sheet as GEN3S-web-one-sheet.jpg), GEN-S SPECIFICATIONS, the maker, read Oct 18, 2026 the page, harvested Oct 18, 2026
The maker's page; its data sheet gives the same.
How far it moves the receiver extension back1.3 in ± 0.05 in 33 mmConfirmedPublished: Law Tactical, AR Folding Stock Adapter GEN-S (the page at the Gen 3-M's address: "PRODUCT CODE: 99312"), GEN-S SPECIFICATIONS, the maker, read Oct 18, 2026
Published “Adds 1.3 inches to length of pull” used
Law Tactical, AR Folding Stock Adapter GEN-S (the page at the Gen 3-M's address: "PRODUCT CODE: 99312"), GEN-S SPECIFICATIONS, the maker, read Oct 18, 2026 the page, harvested Oct 18, 2026
Published “Adds 1.3 inches to Length of Pull”
Law Tactical, AR Folding Stock Adapter GEN-S data sheet (linked from the maker's page as its Data Sheet; one page with no text layer, read as a picture; the same sheet as GEN3S-web-one-sheet.jpg), GEN-S SPECIFICATIONS, the maker, read Oct 18, 2026 the page, harvested Oct 18, 2026
Published “Adds 1.3 inches to length of pull”
Wilson Combat, STOCK ADAPTOR, LAW TACTICAL, AR, GEN-S, FOLDING (item NW809), Feautures, a seller, read Oct 18, 2026 the page, harvested Oct 18, 2026
The maker's page; its data sheet and a seller give the same. The length of pull is what the stock moves back by, which is this.
The tube screws into the stock half as into a lower (the instructions: "in the same manner it would be installed onto the rear of the rifle receiver"), so the stock half's rear face is the receiver's rear face moved back by this. No side photo with a lower's pins in frame is on file to check it.
Its length along the bore (the housing, front face to rear face)1.3 in ± 0.05 in 33 mmConfirmedWorked out: {.added_length}
Worked out 1.3 in ± 0.05 in used
{.added_length}, harvested
The receiver half's front face bears on the lower's rear face (std.ar15.receiver_rear_x) and the stock half's rear face stands where a lower's would: the housing is as long as it moves the tube back. The threaded flange reaches forward of it into the lower's ring.
The receiver half, front face to where the halves meet0.65 in ± 0.1 in 16.5 mmConfirmedWorked out: {.hinge_x} + {std.ar15.receiver_rear_x}
Worked out 0.65 in ± 0.1 in used
{.hinge_x} + {std.ar15.receiver_rear_x}, harvested
Where the halves meet is in the hinge's plane (.hinge_x): folded open 180 degrees the two mating faces lie side by side in one plane (Primary Arms' 430116178_01 from above), which a seam ahead of or behind the axis would offset by twice its distance. No square side view of the part is on file to read it on directly.
The stock half, where the halves meet to its rear face0.65 in ± 0.1 in 16.5 mmConfirmedWorked out: {.length} - {.receiver_half_length}
Worked out 0.65 in ± 0.1 in used
{.length} - {.receiver_half_length}, harvested
The hinge's axis behind the takedown pin1.775 in ± 0.1 in 45.1 mmConfirmedWorked out: 0in - {std.ar15.receiver_rear_x} + {.length} / 2
Worked out 1.775 in ± 0.1 in used
0in - {std.ar15.receiver_rear_x} + {.length} / 2, harvested
Half the housing's length behind the lower's rear face (the Army's drawing): on Primary Arms' photo from above (430116178_01) the part lies folded open 180 degrees, each half flat on its outer face (the receiver half's front, the stock half's rear: both bores read as circles, rms under a pixel), with the hinge's axis level between them, which puts the axis as far from the one outer face as from the other.
The hinge's axis out from the tube's axis, toward the side it folds to (the rifle's left)1.082 in ± 0.03 in 27.5 mmProvisionalPhoto: Primary Arms 430116178_01: the black GEN-S folded open 180 degrees on white, both mating faces up, from straight above; 5000 x 5000
Photo 1.082 in ± 0.03 in used
Primary Arms 430116178_01: the black GEN-S folded open 180 degrees on white, both mating faces up, from straight above; 5000 x 5000, harvested
Scale: the stock half's threaded bore seen through: a RANSAC circle on the hole's rim, 824.2 px across (rms 0.82 px), as .bore_thread_crest_d: 712.5 px/in. The photo is rolled 2.28 degrees (the receiver half's bore, 859.8 px across, stands 61 px higher 1540 px to the right): read after turning it back so the two bores' centres lie on one row. Read by half the bores' centres' distance, 1541.4 px / 2 = 770.7 px. The hinge's column's own edges against the white beside it (the middle knuckle's left edge, the knurled nut's two) put its middle 9 px right and 10 px left of midway. ± covers the scale's (2.1%) and those pixels
Folded open 180 degrees about the hinge, the two halves' bores stand side by side twice this apart, with the hinge midway. The side is the left: in Primary Arms' photo the mating faces are toward the lens (as they face rearward when folded) and the receiver half (its latch, its window and "CLOSE BEFORE FIRING") is on the right, its button's bar out of its right side: seen from behind, the stock half has swung to the rifle's left. The instructions' cover draws a braced rifle from its left (the muzzle to the left) with the brace folded across the near side, the data sheet's drawing the same.
How far the hinge turns before its own halves stop it180° ± 5°ProvisionalPhoto: Primary Arms 430116178_01: the black GEN-S folded open 180 degrees on white, both mating faces up, from straight above; 5000 x 5000
Photo 180 deg ± 5 deg used
Primary Arms 430116178_01: the black GEN-S folded open 180 degrees on white, both mating faces up, from straight above; 5000 x 5000, harvested
Scale: angles: both bores read as circles (RANSAC, rms 0.82 and 0.54 px) on one row once the picture's roll is taken out, the faces square to the lens. Read by the two halves' faces in one plane, side by side; read with US 8,769,855 (engraved "PAT. 8769855" on the part): "the stock can be folded flat against the receiver when the folding stock adapter is in an open position"
Folded open on a table (Primary Arms' photo from above) the halves lie side by side with their mating faces in one plane, and below the rings the two halves meet across the hinge: the patent the part is marked with says the stock "can be folded flat against the receiver". No page states an angle, and no photo shows it turned past that; how far the stock itself goes on a rifle before it meets the receiver is the build's (the app works it out).
The stock half's threaded bore: its thread's crests (what one sees through it)1.157 in ± 0.025 in 29.4 mmConfirmedWorked out: ({std.receiver_extension.thread_major_d} / 1.0432 + {std.receiver_extension.thread_major_d}) / 2
Worked out 1.1568 in ± 0.0245 in used
({std.receiver_extension.thread_major_d} / 1.0432 + {std.receiver_extension.thread_major_d}) / 2, harvested
The middle of 1.1324 (the flange's major diameter over this part's two bores' ratio) and 1.1813 (the extension's major diameter, which a hole's crests are under); ± half that span.
The scale of every photo here. The receiver extension screws in as into a lower, so this is a 1 3/16-16 thread in a hole: its crests lie between the extension's own minor and major diameters. The receiver half's bore, read beside it in the same photo at 1.0432 times this (859.8 / 824.2 px), has to pass the threaded flange (std major 1.1813): that puts this at 1.1324 or more.
The receiver half's bore (where the flange passes, at its narrowest)1.207 in ± 0.026 in 30.7 mmProvisionalPhoto: Primary Arms 430116178_01: the black GEN-S folded open 180 degrees on white, both mating faces up, from straight above; 5000 x 5000
Photo 1.207 in ± 0.026 in used
Primary Arms 430116178_01: the black GEN-S folded open 180 degrees on white, both mating faces up, from straight above; 5000 x 5000, harvested
Scale: the stock half's threaded bore seen through: a RANSAC circle on the hole's rim, 824.2 px across (rms 0.82 px), as .bore_thread_crest_d: 712.5 px/in. The photo is rolled 2.28 degrees (the receiver half's bore, 859.8 px across, stands 61 px higher 1540 px to the right): read after turning it back so the two bores' centres lie on one row. Read by a RANSAC circle on the hole's rim, 859.8 px across (rms 0.54 px; the latch's hook inside it left out by the fit's tolerance)
The rings' tops above the tube's axis0.706 in ± 0.02 in 17.9 mmProvisionalPhoto: Primary Arms 430116178_01: the black GEN-S folded open 180 degrees on white, both mating faces up, from straight above; 5000 x 5000
Photo 0.706 in ± 0.02 in used
Primary Arms 430116178_01: the black GEN-S folded open 180 degrees on white, both mating faces up, from straight above; 5000 x 5000, harvested
Scale: the stock half's threaded bore seen through: a RANSAC circle on the hole's rim, 824.2 px across (rms 0.82 px), as .bore_thread_crest_d: 712.5 px/in. The photo is rolled 2.28 degrees (the receiver half's bore, 859.8 px across, stands 61 px higher 1540 px to the right): read after turning it back so the two bores' centres lie on one row. Read by the stock half's outline's top, 503 px above its bore's centre (the receiver half's reads 0.687: its ring is a little lower)
Its lowest point below the tube's axis (the receiver half's foot)1.52 in ± 0.03 in 38.6 mmProvisionalPhoto: Primary Arms 430116178_01: the black GEN-S folded open 180 degrees on white, both mating faces up, from straight above; 5000 x 5000
Photo 1.52 in ± 0.03 in used
Primary Arms 430116178_01: the black GEN-S folded open 180 degrees on white, both mating faces up, from straight above; 5000 x 5000, harvested
Scale: the stock half's threaded bore seen through: a RANSAC circle on the hole's rim, 824.2 px across (rms 0.82 px), as .bore_thread_crest_d: 712.5 px/in. The photo is rolled 2.28 degrees (the receiver half's bore, 859.8 px across, stands 61 px higher 1540 px to the right): read after turning it back so the two bores' centres lie on one row. Read by the receiver half's outline's lowest row, 1083 px below the bores' row (the stock half's foot reads 1.433)
Its height2.226 in ± 0.04 in 56.5 mmProvisionalWorked out: {.body_top_above_axis} + {.body_bottom_below_axis}
Worked out 2.226 in ± 0.04 in used
{.body_top_above_axis} + {.body_bottom_below_axis}, harvested
Its side away from the hinge (the rifle's right), out from the tube's axis0.804 in ± 0.02 in 20.4 mmProvisionalPhoto: Primary Arms 430116178_01: the black GEN-S folded open 180 degrees on white, both mating faces up, from straight above; 5000 x 5000
Photo 0.804 in ± 0.02 in used
Primary Arms 430116178_01: the black GEN-S folded open 180 degrees on white, both mating faces up, from straight above; 5000 x 5000, harvested
Scale: the stock half's threaded bore seen through: a RANSAC circle on the hole's rim, 824.2 px across (rms 0.82 px), as .bore_thread_crest_d: 712.5 px/in. The photo is rolled 2.28 degrees (the receiver half's bore, 859.8 px across, stands 61 px higher 1540 px to the right): read after turning it back so the two bores' centres lie on one row. Read by the stock half's ring at its widest, 573 px from its bore's centre (the receiver half's ring 0.794; its straight side lower down 0.751, where the button's bar stands out past it)
The receiver half's straight side where the button's bar comes out, out from the tube's axis0.751 in ± 0.015 in 19.1 mmProvisionalPhoto: Primary Arms 430116178_01: the black GEN-S folded open 180 degrees on white, both mating faces up, from straight above; 5000 x 5000
Photo 0.751 in ± 0.015 in used
Primary Arms 430116178_01: the black GEN-S folded open 180 degrees on white, both mating faces up, from straight above; 5000 x 5000, harvested
Scale: the stock half's threaded bore seen through: a RANSAC circle on the hole's rim, 824.2 px across (rms 0.82 px), as .bore_thread_crest_d: 712.5 px/in. The photo is rolled 2.28 degrees (the receiver half's bore, 859.8 px across, stands 61 px higher 1540 px to the right): read after turning it back so the two bores' centres lie on one row. Read by column 3676, 535 px from the receiver half's bore centre: the side runs straight there from 0.37 to 1.06 under the axis (columns 3672 to 3676), the bar standing out past it between rows 1730 and 1928
Its width across the rifle, the hinge included (the button's bar not)2.181 in ± 0.05 in 55.4 mmProvisionalWorked out: {.far_side} + {.hinge_z} + {.pivot_d} / 2
Worked out 2.181 in ± 0.05 in used
{.far_side} + {.hinge_z} + {.pivot_d} / 2, harvested
The hinge's two outer knuckles (the stock half's tabs), across0.44 in ± 0.03 in 11.2 mmProvisionalPhoto: Primary Arms 430116178_01: the black GEN-S folded open 180 degrees on white, both mating faces up, from straight above; 5000 x 5000
Photo 0.44 in ± 0.03 in used
Primary Arms 430116178_01: the black GEN-S folded open 180 degrees on white, both mating faces up, from straight above; 5000 x 5000, harvested
Scale: the stock half's threaded bore seen through: a RANSAC circle on the hole's rim, 824.2 px across (rms 0.82 px), as .bore_thread_crest_d: 712.5 px/in. The photo is rolled 2.28 degrees (the receiver half's bore, 859.8 px across, stands 61 px higher 1540 px to the right): read after turning it back so the two bores' centres lie on one row. Read by the upper tab seen from the side between its two lit edges, 313 px (its side toward the stock half meets that half's body in one tone, so where it ends there is a reading of its highlight's edge)
The hinge's middle knuckle (the receiver half's pivot), across0.6 in ± 0.03 in 15.2 mmProvisionalPhoto: Primary Arms 430116178_01: the black GEN-S folded open 180 degrees on white, both mating faces up, from straight above; 5000 x 5000
Photo 0.6 in ± 0.03 in used
Primary Arms 430116178_01: the black GEN-S folded open 180 degrees on white, both mating faces up, from straight above; 5000 x 5000, harvested
Scale: the stock half's threaded bore seen through: a RANSAC circle on the hole's rim, 824.2 px across (rms 0.82 px), as .bore_thread_crest_d: 712.5 px/in. The photo is rolled 2.28 degrees (the receiver half's bore, 859.8 px across, stands 61 px higher 1540 px to the right): read after turning it back so the two bores' centres lie on one row. Read by seen from the side, 428 px across (its left edge against the white slot beside it, column 2165; its right edge where it meets the receiver half's face, 2593)
The black washers between the knuckles, across0.57 in ± 0.03 in 14.5 mmProvisionalPhoto: Primary Arms 430116178_01: the black GEN-S folded open 180 degrees on white, both mating faces up, from straight above; 5000 x 5000
Photo 0.57 in ± 0.03 in used
Primary Arms 430116178_01: the black GEN-S folded open 180 degrees on white, both mating faces up, from straight above; 5000 x 5000, harvested
Scale: the stock half's threaded bore seen through: a RANSAC circle on the hole's rim, 824.2 px across (rms 0.82 px), as .bore_thread_crest_d: 712.5 px/in. The photo is rolled 2.28 degrees (the receiver half's bore, 859.8 px across, stands 61 px higher 1540 px to the right): read after turning it back so the two bores' centres lie on one row. Read by 405 to 410 px (the upper washer's black from the white slot, column 2190, to where the receiver half's grey begins, 2595; the lower 2185 to 2595)
The upper tab's top, below the tube's axis0.161 in ± 0.015 in 4.1 mmProvisionalPhoto: Primary Arms 430116178_01: the black GEN-S folded open 180 degrees on white, both mating faces up, from straight above; 5000 x 5000
Photo 0.161 in ± 0.015 in used
Primary Arms 430116178_01: the black GEN-S folded open 180 degrees on white, both mating faces up, from straight above; 5000 x 5000, harvested
Scale: the stock half's threaded bore seen through: a RANSAC circle on the hole's rim, 824.2 px across (rms 0.82 px), as .bore_thread_crest_d: 712.5 px/in. The photo is rolled 2.28 degrees (the receiver half's bore, 859.8 px across, stands 61 px higher 1540 px to the right): read after turning it back so the two bores' centres lie on one row. Read by along the hinge's column (columns 2330 to 2470): the silhouette begins at row 1284, its chamfer's lighter band to 1300
The upper tab's bottom, below the tube's axis0.434 in ± 0.01 in 11 mmProvisionalPhoto: Primary Arms 430116178_01: the black GEN-S folded open 180 degrees on white, both mating faces up, from straight above; 5000 x 5000
Photo 0.434 in ± 0.01 in used
Primary Arms 430116178_01: the black GEN-S folded open 180 degrees on white, both mating faces up, from straight above; 5000 x 5000, harvested
Scale: the stock half's threaded bore seen through: a RANSAC circle on the hole's rim, 824.2 px across (rms 0.82 px), as .bore_thread_crest_d: 712.5 px/in. The photo is rolled 2.28 degrees (the receiver half's bore, 859.8 px across, stands 61 px higher 1540 px to the right): read after turning it back so the two bores' centres lie on one row. Read by row 1478, where the black washer begins (the column's median tone falls from 46 to 30)
The middle knuckle's top, below the tube's axis0.556 in ± 0.01 in 14.1 mmProvisionalPhoto: Primary Arms 430116178_01: the black GEN-S folded open 180 degrees on white, both mating faces up, from straight above; 5000 x 5000
Photo 0.556 in ± 0.01 in used
Primary Arms 430116178_01: the black GEN-S folded open 180 degrees on white, both mating faces up, from straight above; 5000 x 5000, harvested
Scale: the stock half's threaded bore seen through: a RANSAC circle on the hole's rim, 824.2 px across (rms 0.82 px), as .bore_thread_crest_d: 712.5 px/in. The photo is rolled 2.28 degrees (the receiver half's bore, 859.8 px across, stands 61 px higher 1540 px to the right): read after turning it back so the two bores' centres lie on one row. Read by row 1565 (the tone rises from 30 to 100)
The middle knuckle's bottom, below the tube's axis0.987 in ± 0.01 in 25.1 mmProvisionalPhoto: Primary Arms 430116178_01: the black GEN-S folded open 180 degrees on white, both mating faces up, from straight above; 5000 x 5000
Photo 0.987 in ± 0.01 in used
Primary Arms 430116178_01: the black GEN-S folded open 180 degrees on white, both mating faces up, from straight above; 5000 x 5000, harvested
Scale: the stock half's threaded bore seen through: a RANSAC circle on the hole's rim, 824.2 px across (rms 0.82 px), as .bore_thread_crest_d: 712.5 px/in. The photo is rolled 2.28 degrees (the receiver half's bore, 859.8 px across, stands 61 px higher 1540 px to the right): read after turning it back so the two bores' centres lie on one row. Read by row 1872 (the tone falls from 70 to 26)
The lower tab's top, below the tube's axis1.107 in ± 0.01 in 28.1 mmProvisionalPhoto: Primary Arms 430116178_01: the black GEN-S folded open 180 degrees on white, both mating faces up, from straight above; 5000 x 5000
Photo 1.107 in ± 0.01 in used
Primary Arms 430116178_01: the black GEN-S folded open 180 degrees on white, both mating faces up, from straight above; 5000 x 5000, harvested
Scale: the stock half's threaded bore seen through: a RANSAC circle on the hole's rim, 824.2 px across (rms 0.82 px), as .bore_thread_crest_d: 712.5 px/in. The photo is rolled 2.28 degrees (the receiver half's bore, 859.8 px across, stands 61 px higher 1540 px to the right): read after turning it back so the two bores' centres lie on one row. Read by row 1958
The lower tab's bottom, below the tube's axis1.294 in ± 0.01 in 32.9 mmProvisionalPhoto: Primary Arms 430116178_01: the black GEN-S folded open 180 degrees on white, both mating faces up, from straight above; 5000 x 5000
Photo 1.294 in ± 0.01 in used
Primary Arms 430116178_01: the black GEN-S folded open 180 degrees on white, both mating faces up, from straight above; 5000 x 5000, harvested
Scale: the stock half's threaded bore seen through: a RANSAC circle on the hole's rim, 824.2 px across (rms 0.82 px), as .bore_thread_crest_d: 712.5 px/in. The photo is rolled 2.28 degrees (the receiver half's bore, 859.8 px across, stands 61 px higher 1540 px to the right): read after turning it back so the two bores' centres lie on one row. Read by row 2091, where the knurled nut begins (the silhouette narrows to the nut's 263 px)
The hinge bolt's knurled nut, across0.369 in ± 0.01 in 9.4 mmProvisionalPhoto: Primary Arms 430116178_01: the black GEN-S folded open 180 degrees on white, both mating faces up, from straight above; 5000 x 5000
Photo 0.369 in ± 0.01 in used
Primary Arms 430116178_01: the black GEN-S folded open 180 degrees on white, both mating faces up, from straight above; 5000 x 5000, harvested
Scale: the stock half's threaded bore seen through: a RANSAC circle on the hole's rim, 824.2 px across (rms 0.82 px), as .bore_thread_crest_d: 712.5 px/in. The photo is rolled 2.28 degrees (the receiver half's bore, 859.8 px across, stands 61 px higher 1540 px to the right): read after turning it back so the two bores' centres lie on one row. Read by 263 px (columns 2229 to 2492, both edges against the white)
The knurled nut's end, below the tube's axis1.476 in ± 0.015 in 37.5 mmProvisionalPhoto: Primary Arms 430116178_01: the black GEN-S folded open 180 degrees on white, both mating faces up, from straight above; 5000 x 5000
Photo 1.476 in ± 0.015 in used
Primary Arms 430116178_01: the black GEN-S folded open 180 degrees on white, both mating faces up, from straight above; 5000 x 5000, harvested
Scale: the stock half's threaded bore seen through: a RANSAC circle on the hole's rim, 824.2 px across (rms 0.82 px), as .bore_thread_crest_d: 712.5 px/in. The photo is rolled 2.28 degrees (the receiver half's bore, 859.8 px across, stands 61 px higher 1540 px to the right): read after turning it back so the two bores' centres lie on one row. Read by row 2221, the knurl's end
The stock half's rear face: its two small holes, across0.293 in ± 0.03 in 7.4 mmProvisionalPhoto: Primary Arms 430116178_03: the black GEN-S opened about 180 degrees, from behind the stock half's rear face, a little to the side and above; 5000 x 5000
Photo 0.293 in ± 0.03 in used
Primary Arms 430116178_03: the black GEN-S opened about 180 degrees, from behind the stock half's rear face, a little to the side and above; 5000 x 5000, harvested
Scale: the threaded bore's diameter along the face's unforeshortened direction, 776.5 px as .bore_thread_crest_d (the white seen through the bore, an ellipse fitted to it); across that the face is foreshortened by 0.78, the ratio of each small hole's ellipse's axes (156 by 196, 150 by 197 px), and is read after dividing by it; heights from the bore's lowest rim (its crest radius below the axis). Read by each hole's dark (under 30 of 255) an ellipse, 196.2 and 197.4 px along its long axis
The two small holes, each out from the middle0.366 in ± 0.04 in 9.3 mmProvisionalPhoto: Primary Arms 430116178_03: the black GEN-S opened about 180 degrees, from behind the stock half's rear face, a little to the side and above; 5000 x 5000
Photo 0.366 in ± 0.04 in used
Primary Arms 430116178_03: the black GEN-S opened about 180 degrees, from behind the stock half's rear face, a little to the side and above; 5000 x 5000, harvested
Scale: the threaded bore's diameter along the face's unforeshortened direction, 776.5 px as .bore_thread_crest_d (the white seen through the bore, an ellipse fitted to it); across that the face is foreshortened by 0.78, the ratio of each small hole's ellipse's axes (156 by 196, 150 by 197 px), and is read after dividing by it; heights from the bore's lowest rim (its crest radius below the axis). Read by the two centres (3326.2, 2830.8) and (3739.6, 2785.5) after the face's foreshortening is taken out, half their distance
The two small holes' centres below the tube's axis0.685 in ± 0.05 in 17.4 mmProvisionalPhoto: Primary Arms 430116178_03: the black GEN-S opened about 180 degrees, from behind the stock half's rear face, a little to the side and above; 5000 x 5000
Photo 0.685 in ± 0.05 in used
Primary Arms 430116178_03: the black GEN-S opened about 180 degrees, from behind the stock half's rear face, a little to the side and above; 5000 x 5000, harvested
Scale: the threaded bore's diameter along the face's unforeshortened direction, 776.5 px as .bore_thread_crest_d (the white seen through the bore, an ellipse fitted to it); across that the face is foreshortened by 0.78, the ratio of each small hole's ellipse's axes (156 by 196, 150 by 197 px), and is read after dividing by it; heights from the bore's lowest rim (its crest radius below the axis). Read by their line 68 px (0.107 in at 633 px/in up and down the face) below the bore's lowest rim, which is the crest's radius below the axis
The stock half's rear face: its large hole (the sling's quick-detach socket), across0.5 in ± 0.04 in 12.7 mmProvisionalPhoto: Primary Arms 430116178_03: the black GEN-S opened about 180 degrees, from behind the stock half's rear face, a little to the side and above; 5000 x 5000
Photo 0.5 in ± 0.04 in used
Primary Arms 430116178_03: the black GEN-S opened about 180 degrees, from behind the stock half's rear face, a little to the side and above; 5000 x 5000, harvested
Scale: the threaded bore's diameter along the face's unforeshortened direction, 776.5 px as .bore_thread_crest_d (the white seen through the bore, an ellipse fitted to it); across that the face is foreshortened by 0.78, the ratio of each small hole's ellipse's axes (156 by 196, 150 by 197 px), and is read after dividing by it; heights from the bore's lowest rim (its crest radius below the axis). Read by the hole's dark an ellipse, 330.7 px (under 22 of 255) to 347.5 px (under 30) along its long axis
The maker's page: "An integrated single point sling attachment point is included" and "QUICK DETACH Sling attachment point": the large blind hole under the bore, with a floor and a ring in it, is that socket.
The large hole's centre below the tube's axis1.06 in ± 0.06 in 26.9 mmProvisionalPhoto: Primary Arms 430116178_03: the black GEN-S opened about 180 degrees, from behind the stock half's rear face, a little to the side and above; 5000 x 5000
Photo 1.06 in ± 0.06 in used
Primary Arms 430116178_03: the black GEN-S opened about 180 degrees, from behind the stock half's rear face, a little to the side and above; 5000 x 5000, harvested
Scale: the threaded bore's diameter along the face's unforeshortened direction, 776.5 px as .bore_thread_crest_d (the white seen through the bore, an ellipse fitted to it); across that the face is foreshortened by 0.78, the ratio of each small hole's ellipse's axes (156 by 196, 150 by 197 px), and is read after dividing by it; heights from the bore's lowest rim (its crest radius below the axis). Read by 254 px below the small holes' line (0.40 in at 633 px/in), added to .stock_hole_small_below_axis's reading; the eye has the hole's top rim 0.08 higher than the fit's
How deep the rear face's two small holes go0.35 in ± 0.15 in 8.9 mmProvisionalWorked out: An assumption for the drawing, not a reading: the holes are dark to their floors in Primary Arms' photo of the rear face, and the stock half's front face has none (they are blind). Taken a little over half the half's length.
Worked out 0.35 in ± 0.15 in used
An assumption for the drawing, not a reading: the holes are dark to their floors in Primary Arms' photo of the rear face, and the stock half's front face has none (they are blind). Taken a little over half the half's length., harvested
How deep the sling socket goes0.45 in ± 0.1 in 11.4 mmProvisionalWorked out: An assumption for the drawing, not a reading: Primary Arms' photo of the rear face shows the socket's floor and a ring in it, well down; how far isn't read. Short of the half's length, its front face having no hole there.
Worked out 0.45 in ± 0.1 in used
An assumption for the drawing, not a reading: Primary Arms' photo of the rear face shows the socket's floor and a ring in it, well down; how far isn't read. Short of the half's length, its front face having no hole there., harvested
The stock half's locking lug, across (on its front face, low on the side away from the hinge)0.21 in ± 0.02 in 5.3 mmProvisionalPhoto: Primary Arms 430116178_01: the black GEN-S folded open 180 degrees on white, both mating faces up, from straight above; 5000 x 5000
Photo 0.21 in ± 0.02 in used
Primary Arms 430116178_01: the black GEN-S folded open 180 degrees on white, both mating faces up, from straight above; 5000 x 5000, harvested
Scale: the stock half's threaded bore seen through: a RANSAC circle on the hole's rim, 824.2 px across (rms 0.82 px), as .bore_thread_crest_d: 712.5 px/in. The photo is rolled 2.28 degrees (the receiver half's bore, 859.8 px across, stands 61 px higher 1540 px to the right): read after turning it back so the two bores' centres lie on one row. Read by the raised rounded pad left of "PAT. 8769855", its lit rim, 150 px across
The locking lug, up and down0.557 in ± 0.02 in 14.1 mmProvisionalPhoto: Primary Arms 430116178_01: the black GEN-S folded open 180 degrees on white, both mating faces up, from straight above; 5000 x 5000
Photo 0.557 in ± 0.02 in used
Primary Arms 430116178_01: the black GEN-S folded open 180 degrees on white, both mating faces up, from straight above; 5000 x 5000, harvested
Scale: the stock half's threaded bore seen through: a RANSAC circle on the hole's rim, 824.2 px across (rms 0.82 px), as .bore_thread_crest_d: 712.5 px/in. The photo is rolled 2.28 degrees (the receiver half's bore, 859.8 px across, stands 61 px higher 1540 px to the right): read after turning it back so the two bores' centres lie on one row. Read by 397 px, its two rounded ends' rims
The locking lug's middle, out from the tube's axis toward the side away from the hinge0.299 in ± 0.02 in 7.6 mmProvisionalPhoto: Primary Arms 430116178_01: the black GEN-S folded open 180 degrees on white, both mating faces up, from straight above; 5000 x 5000
Photo 0.299 in ± 0.02 in used
Primary Arms 430116178_01: the black GEN-S folded open 180 degrees on white, both mating faces up, from straight above; 5000 x 5000, harvested
Scale: the stock half's threaded bore seen through: a RANSAC circle on the hole's rim, 824.2 px across (rms 0.82 px), as .bore_thread_crest_d: 712.5 px/in. The photo is rolled 2.28 degrees (the receiver half's bore, 859.8 px across, stands 61 px higher 1540 px to the right): read after turning it back so the two bores' centres lie on one row. Read by column 1387, 212.7 px from the stock half's bore centre
The locking lug's middle below the tube's axis0.946 in ± 0.02 in 24 mmProvisionalPhoto: Primary Arms 430116178_01: the black GEN-S folded open 180 degrees on white, both mating faces up, from straight above; 5000 x 5000
Photo 0.946 in ± 0.02 in used
Primary Arms 430116178_01: the black GEN-S folded open 180 degrees on white, both mating faces up, from straight above; 5000 x 5000, harvested
Scale: the stock half's threaded bore seen through: a RANSAC circle on the hole's rim, 824.2 px across (rms 0.82 px), as .bore_thread_crest_d: 712.5 px/in. The photo is rolled 2.28 degrees (the receiver half's bore, 859.8 px across, stands 61 px higher 1540 px to the right): read after turning it back so the two bores' centres lie on one row. Read by row 1843
How far the locking lug stands forward of the stock half's face0.12 in ± 0.05 in 3 mmProvisionalWorked out: An assumption for the drawing, not a reading: no view on file shows the lug in profile (Primary Arms' three-quarter view has it standing a little off the face). The patent's tab goes into the receiver half's indentation, where the button's latch catches it.
Worked out 0.12 in ± 0.05 in used
An assumption for the drawing, not a reading: no view on file shows the lug in profile (Primary Arms' three-quarter view has it standing a little off the face). The patent's tab goes into the receiver half's indentation, where the button's latch catches it., harvested
The receiver half's window for the locking lug and the latch, across0.42 in ± 0.03 in 10.7 mmProvisionalPhoto: Primary Arms 430116178_01: the black GEN-S folded open 180 degrees on white, both mating faces up, from straight above; 5000 x 5000
Photo 0.42 in ± 0.03 in used
Primary Arms 430116178_01: the black GEN-S folded open 180 degrees on white, both mating faces up, from straight above; 5000 x 5000, harvested
Scale: the stock half's threaded bore seen through: a RANSAC circle on the hole's rim, 824.2 px across (rms 0.82 px), as .bore_thread_crest_d: 712.5 px/in. The photo is rolled 2.28 degrees (the receiver half's bore, 859.8 px across, stands 61 px higher 1540 px to the right): read after turning it back so the two bores' centres lie on one row. Read by the dark opening right of "CLOSE BEFORE FIRING", 300 px at mid-height (its side toward the button leans in, 320 px at its top, 260 at its bottom)
The window across at its top (its side toward the button leans in)0.449 in ± 0.02 in 11.4 mmProvisionalPhoto: Primary Arms 430116178_01: the black GEN-S folded open 180 degrees on white, both mating faces up, from straight above; 5000 x 5000
Photo 0.449 in ± 0.02 in used
Primary Arms 430116178_01: the black GEN-S folded open 180 degrees on white, both mating faces up, from straight above; 5000 x 5000, harvested
Scale: the stock half's threaded bore seen through: a RANSAC circle on the hole's rim, 824.2 px across (rms 0.82 px), as .bore_thread_crest_d: 712.5 px/in. The photo is rolled 2.28 degrees (the receiver half's bore, 859.8 px across, stands 61 px higher 1540 px to the right): read after turning it back so the two bores' centres lie on one row. Read by 320 px (columns 3235 to 3555 at row 1700): its side toward the hinge upright, its side toward the button leaning in
The window across at its bottom0.365 in ± 0.02 in 9.3 mmProvisionalPhoto: Primary Arms 430116178_01: the black GEN-S folded open 180 degrees on white, both mating faces up, from straight above; 5000 x 5000
Photo 0.365 in ± 0.02 in used
Primary Arms 430116178_01: the black GEN-S folded open 180 degrees on white, both mating faces up, from straight above; 5000 x 5000, harvested
Scale: the stock half's threaded bore seen through: a RANSAC circle on the hole's rim, 824.2 px across (rms 0.82 px), as .bore_thread_crest_d: 712.5 px/in. The photo is rolled 2.28 degrees (the receiver half's bore, 859.8 px across, stands 61 px higher 1540 px to the right): read after turning it back so the two bores' centres lie on one row. Read by 260 px (columns 3235 to 3495 at row 2020)
The window, up and down0.564 in ± 0.02 in 14.3 mmProvisionalPhoto: Primary Arms 430116178_01: the black GEN-S folded open 180 degrees on white, both mating faces up, from straight above; 5000 x 5000
Photo 0.564 in ± 0.02 in used
Primary Arms 430116178_01: the black GEN-S folded open 180 degrees on white, both mating faces up, from straight above; 5000 x 5000, harvested
Scale: the stock half's threaded bore seen through: a RANSAC circle on the hole's rim, 824.2 px across (rms 0.82 px), as .bore_thread_crest_d: 712.5 px/in. The photo is rolled 2.28 degrees (the receiver half's bore, 859.8 px across, stands 61 px higher 1540 px to the right): read after turning it back so the two bores' centres lie on one row. Read by rows 1660 to 2062 (402 px)
The window's middle, out from the tube's axis toward the side away from the hinge0.342 in ± 0.03 in 8.7 mmProvisionalPhoto: Primary Arms 430116178_01: the black GEN-S folded open 180 degrees on white, both mating faces up, from straight above; 5000 x 5000
Photo 0.342 in ± 0.03 in used
Primary Arms 430116178_01: the black GEN-S folded open 180 degrees on white, both mating faces up, from straight above; 5000 x 5000, harvested
Scale: the stock half's threaded bore seen through: a RANSAC circle on the hole's rim, 824.2 px across (rms 0.82 px), as .bore_thread_crest_d: 712.5 px/in. The photo is rolled 2.28 degrees (the receiver half's bore, 859.8 px across, stands 61 px higher 1540 px to the right): read after turning it back so the two bores' centres lie on one row. Read by column 3385, 244 px from the receiver half's bore centre
The window's middle below the tube's axis0.971 in ± 0.02 in 24.7 mmProvisionalPhoto: Primary Arms 430116178_01: the black GEN-S folded open 180 degrees on white, both mating faces up, from straight above; 5000 x 5000
Photo 0.971 in ± 0.02 in used
Primary Arms 430116178_01: the black GEN-S folded open 180 degrees on white, both mating faces up, from straight above; 5000 x 5000, harvested
Scale: the stock half's threaded bore seen through: a RANSAC circle on the hole's rim, 824.2 px across (rms 0.82 px), as .bore_thread_crest_d: 712.5 px/in. The photo is rolled 2.28 degrees (the receiver half's bore, 859.8 px across, stands 61 px higher 1540 px to the right): read after turning it back so the two bores' centres lie on one row. Read by row 1861
How deep the window goes into the receiver half0.3 in ± 0.1 in 7.6 mmProvisionalWorked out: An assumption for the drawing, not a reading: deep enough for the lug (.tab_proud) and the latch behind it; Primary Arms' photo shows the latch's block in it, its floor not.
Worked out 0.3 in ± 0.1 in used
An assumption for the drawing, not a reading: deep enough for the lug (.tab_proud) and the latch behind it; Primary Arms' photo shows the latch's block in it, its floor not., harvested
The button's bar out of the receiver half's side (the rifle's right), up and down0.278 in ± 0.02 in 7.1 mmProvisionalPhoto: Primary Arms 430116178_01: the black GEN-S folded open 180 degrees on white, both mating faces up, from straight above; 5000 x 5000
Photo 0.278 in ± 0.02 in used
Primary Arms 430116178_01: the black GEN-S folded open 180 degrees on white, both mating faces up, from straight above; 5000 x 5000, harvested
Scale: the stock half's threaded bore seen through: a RANSAC circle on the hole's rim, 824.2 px across (rms 0.82 px), as .bore_thread_crest_d: 712.5 px/in. The photo is rolled 2.28 degrees (the receiver half's bore, 859.8 px across, stands 61 px higher 1540 px to the right): read after turning it back so the two bores' centres lie on one row. Read by the black bar standing out past the side, rows 1730 to 1928 (198 px)
How far the button's bar stands out of the side0.205 in ± 0.02 in 5.2 mmProvisionalPhoto: Primary Arms 430116178_01: the black GEN-S folded open 180 degrees on white, both mating faces up, from straight above; 5000 x 5000
Photo 0.205 in ± 0.02 in used
Primary Arms 430116178_01: the black GEN-S folded open 180 degrees on white, both mating faces up, from straight above; 5000 x 5000, harvested
Scale: the stock half's threaded bore seen through: a RANSAC circle on the hole's rim, 824.2 px across (rms 0.82 px), as .bore_thread_crest_d: 712.5 px/in. The photo is rolled 2.28 degrees (the receiver half's bore, 859.8 px across, stands 61 px higher 1540 px to the right): read after turning it back so the two bores' centres lie on one row. Read by to column 3822, 146 px past the side's straight edge (3676)
The button's bar's middle below the tube's axis0.926 in ± 0.02 in 23.5 mmProvisionalPhoto: Primary Arms 430116178_01: the black GEN-S folded open 180 degrees on white, both mating faces up, from straight above; 5000 x 5000
Photo 0.926 in ± 0.02 in used
Primary Arms 430116178_01: the black GEN-S folded open 180 degrees on white, both mating faces up, from straight above; 5000 x 5000, harvested
Scale: the stock half's threaded bore seen through: a RANSAC circle on the hole's rim, 824.2 px across (rms 0.82 px), as .bore_thread_crest_d: 712.5 px/in. The photo is rolled 2.28 degrees (the receiver half's bore, 859.8 px across, stands 61 px higher 1540 px to the right): read after turning it back so the two bores' centres lie on one row. Read by row 1829
The threaded flange's head, across (it sits in the receiver half)1.25 in ± 0.05 in 31.8 mmProvisionalWorked out: An assumption for the drawing, not a reading: the head bears on a lip inside the receiver half's bore (the patent: "a head 114, which can be configured to abut up against a raised lip 146 located within the dead hinge section opening 123"); a little over the lip, .receiver_bore_d. The flange's own pictures (Primary Arms' and Wilson Combat's) are each a picture of their own with no scale to the bore. Hidden when the adapter is on a rifle.
Worked out 1.25 in ± 0.05 in used
An assumption for the drawing, not a reading: the head bears on a lip inside the receiver half's bore (the patent: "a head 114, which can be configured to abut up against a raised lip 146 located within the dead hinge section opening 123"); a little over the lip, .receiver_bore_d. The flange's own pictures (Primary Arms' and Wilson Combat's) are each a picture of their own with no scale to the bore. Hidden when the adapter is on a rifle., harvested
The flange's head, along the bore0.12 in ± 0.04 in 3 mmProvisionalWorked out: An assumption for the drawing, not a reading: the flange's pictures have its slotted end a fraction of the ring's length; hidden on a rifle.
Worked out 0.12 in ± 0.04 in used
An assumption for the drawing, not a reading: the flange's pictures have its slotted end a fraction of the ring's length; hidden on a rifle., harvested
Bolt carrier extension: the end that goes into the carrier, across (its O-rings)0.572 in ± 0.02 in 14.5 mmProvisionalPhoto: Primary Arms 430116178_01: below the adapter, the bolt carrier extension standing on its head end, seen from in front and about 15 degrees above (its ends' rims are ellipses 0.25 and 0.27 of their widths: sin 15 degrees), a picture of its own set into the sheet; 5000 px
Photo 0.572 in ± 0.02 in used
Primary Arms 430116178_01: below the adapter, the bolt carrier extension standing on its head end, seen from in front and about 15 degrees above (its ends' rims are ellipses 0.25 and 0.27 of their widths: sin 15 degrees), a picture of its own set into the sheet; 5000 px, harvested
Scale: its length from the first shoulder's plane (row 3000) to its head end's plane (3780), 780 px, as .added_length: what it fills between the carrier and the buffer (the patent: "This extension in length can compensate for the length added to the rifle by the addition of the folding stock adapter 100"): 600 px/in along it, and 621 px/in across (its lengths are foreshortened by cos 15 degrees). Read by its silhouette's width row by row (luminance under 200), its axis fitted through the rows' middles (0.38 degrees off upright); the pilot 355 px
The carrier's tail is bored .625 (std.ar15.carrier_tail_bore), and this end goes in to its first shoulder with O-rings that hold it: read at this scale it is 0.053 under the bore. Scaled instead so this end is the bore, the extension would stand 1.48 in behind its shoulder and weigh 2.9 oz in steel; at this scale its turned volume is 0.420 cubic inches, 1.92 oz, which is the maker's 2 oz. The length is taken as the scale; the O-rings' squeeze is what the 0.053 leaves.
Bolt carrier extension: the end in the carrier, to its first shoulder0.453 in ± 0.02 in 11.5 mmProvisionalPhoto: Primary Arms 430116178_01: below the adapter, the bolt carrier extension standing on its head end, seen from in front and about 15 degrees above (its ends' rims are ellipses 0.25 and 0.27 of their widths: sin 15 degrees), a picture of its own set into the sheet; 5000 px
Photo 0.453 in ± 0.02 in used
Primary Arms 430116178_01: below the adapter, the bolt carrier extension standing on its head end, seen from in front and about 15 degrees above (its ends' rims are ellipses 0.25 and 0.27 of their widths: sin 15 degrees), a picture of its own set into the sheet; 5000 px, harvested
Scale: its length from the first shoulder's plane (row 3000) to its head end's plane (3780), 780 px, as .added_length: what it fills between the carrier and the buffer (the patent: "This extension in length can compensate for the length added to the rifle by the addition of the folding stock adapter 100"): 600 px/in along it, and 621 px/in across (its lengths are foreshortened by cos 15 degrees). Read by its silhouette's width row by row (luminance under 200), its axis fitted through the rows' middles (0.38 degrees off upright); the pilot 355 px
rows 2728 (the end's plane, the middle of its rim's ellipse) to 3000 (272 px)
Bolt carrier extension: the collar (its first shoulder), across0.689 in ± 0.02 in 17.5 mmProvisionalPhoto: Primary Arms 430116178_01: below the adapter, the bolt carrier extension standing on its head end, seen from in front and about 15 degrees above (its ends' rims are ellipses 0.25 and 0.27 of their widths: sin 15 degrees), a picture of its own set into the sheet; 5000 px
Photo 0.689 in ± 0.02 in used
Primary Arms 430116178_01: below the adapter, the bolt carrier extension standing on its head end, seen from in front and about 15 degrees above (its ends' rims are ellipses 0.25 and 0.27 of their widths: sin 15 degrees), a picture of its own set into the sheet; 5000 px, harvested
Scale: its length from the first shoulder's plane (row 3000) to its head end's plane (3780), 780 px, as .added_length: what it fills between the carrier and the buffer (the patent: "This extension in length can compensate for the length added to the rifle by the addition of the folding stock adapter 100"): 600 px/in along it, and 621 px/in across (its lengths are foreshortened by cos 15 degrees). Read by its silhouette's width row by row (luminance under 200), its axis fitted through the rows' middles (0.38 degrees off upright); the pilot 355 px
428 px
Bolt carrier extension: the collar, along0.083 in ± 0.02 in 2.1 mmProvisionalPhoto: Primary Arms 430116178_01: below the adapter, the bolt carrier extension standing on its head end, seen from in front and about 15 degrees above (its ends' rims are ellipses 0.25 and 0.27 of their widths: sin 15 degrees), a picture of its own set into the sheet; 5000 px
Photo 0.083 in ± 0.02 in used
Primary Arms 430116178_01: below the adapter, the bolt carrier extension standing on its head end, seen from in front and about 15 degrees above (its ends' rims are ellipses 0.25 and 0.27 of their widths: sin 15 degrees), a picture of its own set into the sheet; 5000 px, harvested
Scale: its length from the first shoulder's plane (row 3000) to its head end's plane (3780), 780 px, as .added_length: what it fills between the carrier and the buffer (the patent: "This extension in length can compensate for the length added to the rifle by the addition of the folding stock adapter 100"): 600 px/in along it, and 621 px/in across (its lengths are foreshortened by cos 15 degrees). Read by its silhouette's width row by row (luminance under 200), its axis fitted through the rows' middles (0.38 degrees off upright); the pilot 355 px
rows 3000 to 3050
Bolt carrier extension: the neck behind the collar, across0.452 in ± 0.02 in 11.5 mmProvisionalPhoto: Primary Arms 430116178_01: below the adapter, the bolt carrier extension standing on its head end, seen from in front and about 15 degrees above (its ends' rims are ellipses 0.25 and 0.27 of their widths: sin 15 degrees), a picture of its own set into the sheet; 5000 px
Photo 0.452 in ± 0.02 in used
Primary Arms 430116178_01: below the adapter, the bolt carrier extension standing on its head end, seen from in front and about 15 degrees above (its ends' rims are ellipses 0.25 and 0.27 of their widths: sin 15 degrees), a picture of its own set into the sheet; 5000 px, harvested
Scale: its length from the first shoulder's plane (row 3000) to its head end's plane (3780), 780 px, as .added_length: what it fills between the carrier and the buffer (the patent: "This extension in length can compensate for the length added to the rifle by the addition of the folding stock adapter 100"): 600 px/in along it, and 621 px/in across (its lengths are foreshortened by cos 15 degrees). Read by its silhouette's width row by row (luminance under 200), its axis fitted through the rows' middles (0.38 degrees off upright); the pilot 355 px
281 px
Bolt carrier extension: the neck, along (to where it flares)0.233 in ± 0.02 in 5.9 mmProvisionalPhoto: Primary Arms 430116178_01: below the adapter, the bolt carrier extension standing on its head end, seen from in front and about 15 degrees above (its ends' rims are ellipses 0.25 and 0.27 of their widths: sin 15 degrees), a picture of its own set into the sheet; 5000 px
Photo 0.233 in ± 0.02 in used
Primary Arms 430116178_01: below the adapter, the bolt carrier extension standing on its head end, seen from in front and about 15 degrees above (its ends' rims are ellipses 0.25 and 0.27 of their widths: sin 15 degrees), a picture of its own set into the sheet; 5000 px, harvested
Scale: its length from the first shoulder's plane (row 3000) to its head end's plane (3780), 780 px, as .added_length: what it fills between the carrier and the buffer (the patent: "This extension in length can compensate for the length added to the rifle by the addition of the folding stock adapter 100"): 600 px/in along it, and 621 px/in across (its lengths are foreshortened by cos 15 degrees). Read by its silhouette's width row by row (luminance under 200), its axis fitted through the rows' middles (0.38 degrees off upright); the pilot 355 px
rows 3050 to 3190
Bolt carrier extension: the cone's wide end, across (a step up to the body after it)0.652 in ± 0.02 in 16.6 mmProvisionalPhoto: Primary Arms 430116178_01: below the adapter, the bolt carrier extension standing on its head end, seen from in front and about 15 degrees above (its ends' rims are ellipses 0.25 and 0.27 of their widths: sin 15 degrees), a picture of its own set into the sheet; 5000 px
Photo 0.652 in ± 0.02 in used
Primary Arms 430116178_01: below the adapter, the bolt carrier extension standing on its head end, seen from in front and about 15 degrees above (its ends' rims are ellipses 0.25 and 0.27 of their widths: sin 15 degrees), a picture of its own set into the sheet; 5000 px, harvested
Scale: its length from the first shoulder's plane (row 3000) to its head end's plane (3780), 780 px, as .added_length: what it fills between the carrier and the buffer (the patent: "This extension in length can compensate for the length added to the rifle by the addition of the folding stock adapter 100"): 600 px/in along it, and 621 px/in across (its lengths are foreshortened by cos 15 degrees). Read by its silhouette's width row by row (luminance under 200), its axis fitted through the rows' middles (0.38 degrees off upright); the pilot 355 px
405 px at row 3314, then 429 from 3322
Bolt carrier extension: the cone from the neck to the body, along0.217 in ± 0.02 in 5.5 mmProvisionalPhoto: Primary Arms 430116178_01: below the adapter, the bolt carrier extension standing on its head end, seen from in front and about 15 degrees above (its ends' rims are ellipses 0.25 and 0.27 of their widths: sin 15 degrees), a picture of its own set into the sheet; 5000 px
Photo 0.217 in ± 0.02 in used
Primary Arms 430116178_01: below the adapter, the bolt carrier extension standing on its head end, seen from in front and about 15 degrees above (its ends' rims are ellipses 0.25 and 0.27 of their widths: sin 15 degrees), a picture of its own set into the sheet; 5000 px, harvested
Scale: its length from the first shoulder's plane (row 3000) to its head end's plane (3780), 780 px, as .added_length: what it fills between the carrier and the buffer (the patent: "This extension in length can compensate for the length added to the rifle by the addition of the folding stock adapter 100"): 600 px/in along it, and 621 px/in across (its lengths are foreshortened by cos 15 degrees). Read by its silhouette's width row by row (luminance under 200), its axis fitted through the rows' middles (0.38 degrees off upright); the pilot 355 px
rows 3190 to 3320
Bolt carrier extension: the body, across0.692 in ± 0.02 in 17.6 mmProvisionalPhoto: Primary Arms 430116178_01: below the adapter, the bolt carrier extension standing on its head end, seen from in front and about 15 degrees above (its ends' rims are ellipses 0.25 and 0.27 of their widths: sin 15 degrees), a picture of its own set into the sheet; 5000 px
Photo 0.692 in ± 0.02 in used
Primary Arms 430116178_01: below the adapter, the bolt carrier extension standing on its head end, seen from in front and about 15 degrees above (its ends' rims are ellipses 0.25 and 0.27 of their widths: sin 15 degrees), a picture of its own set into the sheet; 5000 px, harvested
Scale: its length from the first shoulder's plane (row 3000) to its head end's plane (3780), 780 px, as .added_length: what it fills between the carrier and the buffer (the patent: "This extension in length can compensate for the length added to the rifle by the addition of the folding stock adapter 100"): 600 px/in along it, and 621 px/in across (its lengths are foreshortened by cos 15 degrees). Read by its silhouette's width row by row (luminance under 200), its axis fitted through the rows' middles (0.38 degrees off upright); the pilot 355 px
430 px
Bolt carrier extension: the body, along0.217 in ± 0.02 in 5.5 mmProvisionalPhoto: Primary Arms 430116178_01: below the adapter, the bolt carrier extension standing on its head end, seen from in front and about 15 degrees above (its ends' rims are ellipses 0.25 and 0.27 of their widths: sin 15 degrees), a picture of its own set into the sheet; 5000 px
Photo 0.217 in ± 0.02 in used
Primary Arms 430116178_01: below the adapter, the bolt carrier extension standing on its head end, seen from in front and about 15 degrees above (its ends' rims are ellipses 0.25 and 0.27 of their widths: sin 15 degrees), a picture of its own set into the sheet; 5000 px, harvested
Scale: its length from the first shoulder's plane (row 3000) to its head end's plane (3780), 780 px, as .added_length: what it fills between the carrier and the buffer (the patent: "This extension in length can compensate for the length added to the rifle by the addition of the folding stock adapter 100"): 600 px/in along it, and 621 px/in across (its lengths are foreshortened by cos 15 degrees). Read by its silhouette's width row by row (luminance under 200), its axis fitted through the rows' middles (0.38 degrees off upright); the pilot 355 px
rows 3320 to 3450
Bolt carrier extension: the stem behind the body, across0.467 in ± 0.02 in 11.9 mmProvisionalPhoto: Primary Arms 430116178_01: below the adapter, the bolt carrier extension standing on its head end, seen from in front and about 15 degrees above (its ends' rims are ellipses 0.25 and 0.27 of their widths: sin 15 degrees), a picture of its own set into the sheet; 5000 px
Photo 0.467 in ± 0.02 in used
Primary Arms 430116178_01: below the adapter, the bolt carrier extension standing on its head end, seen from in front and about 15 degrees above (its ends' rims are ellipses 0.25 and 0.27 of their widths: sin 15 degrees), a picture of its own set into the sheet; 5000 px, harvested
Scale: its length from the first shoulder's plane (row 3000) to its head end's plane (3780), 780 px, as .added_length: what it fills between the carrier and the buffer (the patent: "This extension in length can compensate for the length added to the rifle by the addition of the folding stock adapter 100"): 600 px/in along it, and 621 px/in across (its lengths are foreshortened by cos 15 degrees). Read by its silhouette's width row by row (luminance under 200), its axis fitted through the rows' middles (0.38 degrees off upright); the pilot 355 px
290 px
Bolt carrier extension: the stem, along0.427 in ± 0.02 in 10.8 mmProvisionalPhoto: Primary Arms 430116178_01: below the adapter, the bolt carrier extension standing on its head end, seen from in front and about 15 degrees above (its ends' rims are ellipses 0.25 and 0.27 of their widths: sin 15 degrees), a picture of its own set into the sheet; 5000 px
Photo 0.427 in ± 0.02 in used
Primary Arms 430116178_01: below the adapter, the bolt carrier extension standing on its head end, seen from in front and about 15 degrees above (its ends' rims are ellipses 0.25 and 0.27 of their widths: sin 15 degrees), a picture of its own set into the sheet; 5000 px, harvested
Scale: its length from the first shoulder's plane (row 3000) to its head end's plane (3780), 780 px, as .added_length: what it fills between the carrier and the buffer (the patent: "This extension in length can compensate for the length added to the rifle by the addition of the folding stock adapter 100"): 600 px/in along it, and 621 px/in across (its lengths are foreshortened by cos 15 degrees). Read by its silhouette's width row by row (luminance under 200), its axis fitted through the rows' middles (0.38 degrees off upright); the pilot 355 px
rows 3450 to 3706
Bolt carrier extension: its head (the end the buffer bears on), across0.614 in ± 0.02 in 15.6 mmProvisionalPhoto: Primary Arms 430116178_01: below the adapter, the bolt carrier extension standing on its head end, seen from in front and about 15 degrees above (its ends' rims are ellipses 0.25 and 0.27 of their widths: sin 15 degrees), a picture of its own set into the sheet; 5000 px
Photo 0.614 in ± 0.02 in used
Primary Arms 430116178_01: below the adapter, the bolt carrier extension standing on its head end, seen from in front and about 15 degrees above (its ends' rims are ellipses 0.25 and 0.27 of their widths: sin 15 degrees), a picture of its own set into the sheet; 5000 px, harvested
Scale: its length from the first shoulder's plane (row 3000) to its head end's plane (3780), 780 px, as .added_length: what it fills between the carrier and the buffer (the patent: "This extension in length can compensate for the length added to the rifle by the addition of the folding stock adapter 100"): 600 px/in along it, and 621 px/in across (its lengths are foreshortened by cos 15 degrees). Read by its silhouette's width row by row (luminance under 200), its axis fitted through the rows' middles (0.38 degrees off upright); the pilot 355 px
381 px at its widest, where the flare from the stem ends
Bolt carrier extension: the head's flare, along0.123 in ± 0.02 in 3.1 mmProvisionalPhoto: Primary Arms 430116178_01: below the adapter, the bolt carrier extension standing on its head end, seen from in front and about 15 degrees above (its ends' rims are ellipses 0.25 and 0.27 of their widths: sin 15 degrees), a picture of its own set into the sheet; 5000 px
Photo 0.123 in ± 0.02 in used
Primary Arms 430116178_01: below the adapter, the bolt carrier extension standing on its head end, seen from in front and about 15 degrees above (its ends' rims are ellipses 0.25 and 0.27 of their widths: sin 15 degrees), a picture of its own set into the sheet; 5000 px, harvested
Scale: its length from the first shoulder's plane (row 3000) to its head end's plane (3780), 780 px, as .added_length: what it fills between the carrier and the buffer (the patent: "This extension in length can compensate for the length added to the rifle by the addition of the folding stock adapter 100"): 600 px/in along it, and 621 px/in across (its lengths are foreshortened by cos 15 degrees). Read by its silhouette's width row by row (luminance under 200), its axis fitted through the rows' middles (0.38 degrees off upright); the pilot 355 px
rows 3706 to 3780
The hinge bolt's socket head, across (in a counterbore in the upper tab's top)0.3 in ± 0.04 in 7.6 mmProvisionalWorked out: An assumption for the drawing, not a reading: Primary Arms' photo from behind and above (430116178_03) has a round head with its hex socket in the upper tab's top, most of the tab's width; its rim isn't read on a view square to it.
Worked out 0.3 in ± 0.04 in used
An assumption for the drawing, not a reading: Primary Arms' photo from behind and above (430116178_03) has a round head with its hex socket in the upper tab's top, most of the tab's width; its rim isn't read on a view square to it., harvested
The counterbore the hinge bolt's head sits in, across0.34 in ± 0.03 in 8.6 mmProvisionalWorked out: An assumption for the drawing, not a reading: a thin wall of the tab round the head, as Primary Arms' photo from above shows it.
Worked out 0.34 in ± 0.03 in used
An assumption for the drawing, not a reading: a thin wall of the tab round the head, as Primary Arms' photo from above shows it., harvested
The hinge bolt's hex socket, across its flats0.125 in ± 0.002 in 3.2 mmConfirmedPublished: Law Tactical, AR Folding Stock Adapter GEN-S instructions (Gen-3S_Instructions-web.pdf, text layer), Maintenance, the maker, read Oct 18, 2026
Published “Hinge Tension: A 1/8 Allen Wrench can be used to increase hinge tension by tightening the Hinge Screw (10).” used
Law Tactical, AR Folding Stock Adapter GEN-S instructions (Gen-3S_Instructions-web.pdf, text layer), Maintenance, the maker, read Oct 18, 2026 the page, harvested Oct 18, 2026
The key that turns it is 1/8 in: its socket is that across the flats.
How far the bolt's head stands under the upper tab's top0.02 in ± 0.02 in 0.5 mmProvisionalWorked out: An assumption for the drawing, not a reading: Primary Arms' photo from behind and above has the head about flush with the tab's top; by how much under, isn't seen.
Worked out 0.02 in ± 0.02 in used
An assumption for the drawing, not a reading: Primary Arms' photo from behind and above has the head about flush with the tab's top; by how much under, isn't seen., harvested
The bolt's head, its height (and the counterbore's depth under it)0.15 in ± 0.05 in 3.8 mmProvisionalWorked out: An assumption for the drawing, not a reading: no view shows the head in profile; about half its width, as a socket head is.
Worked out 0.15 in ± 0.05 in used
An assumption for the drawing, not a reading: no view shows the head in profile; about half its width, as a socket head is., harvested
The bolt head's hex socket, its depth0.08 in ± 0.03 in 2 mmProvisionalWorked out: An assumption for the drawing, not a reading: the socket's floor isn't seen.
Worked out 0.08 in ± 0.03 in used
An assumption for the drawing, not a reading: the socket's floor isn't seen., harvested
What it goes with
By the way it mounts, and the figures each part on file states: a part whose figures say it doesn't fit is left out, and one whose fit can't be checked from what is published is marked. A check is against published figures, not a guarantee.
AR-15 receiver extension thread
- Lower receivers
- Aero Precision M4E1 complete lower, A2 grip and M4 stock, Aero Precision M4E1 Stripped Lower Receiver, Battle Arms Development Workhorse stripped lower, BCM MK2 AR-15 Lower Receiver, Bear Creek Arsenal BC-15 Multi Caliber, Lower Receiver, Black Anodized, Geissele Automatics Super Duty AR-15 Lower Receiver - Stripped Lower, Palmetto State Armory AR-15 "Stealth" Stripped Lower Receiver
- Folding stock adapters
- Law Tactical AR Folding Stock Adapter Gen 3-M, Sylvan Arms SA5 Pro AR15 Folding Stock Adapter (Opens To The Left), Sylvan Arms SA5 Pro AR15 Folding Stock Adapter (Opens To The Right)
AR-15 receiver extension thread
- Folding stock adapters
- Law Tactical AR Folding Stock Adapter Gen 3-M, Sylvan Arms SA5 Pro AR15 Folding Stock Adapter (Opens To The Left), Sylvan Arms SA5 Pro AR15 Folding Stock Adapter (Opens To The Right)
- Receiver extensions
- BCM Milspec Carbine Receiver Extension (Buffer Tube) 6 Position, BCM MK2 Receiver Extension, Geissele Automatics Premium Mil-Spec Buffer Tube, Guntec USA AR-15 Mil-Spec Buffer Tube (Gen 2), SB Tactical SBPDW receiver extension, housing and integral castle nut, VLTOR RE-A5 7-Position Receiver Extension, MilSpec Diameter
Prices on file
Each seller's latest reading of its own page: before tax and shipping, and not a quote. The pages are read again every night.
- AR15Discounts $249.99 Black Nov 21, 2026, in stock that day
- Primary Arms $269.99 Black Nov 21, 2026, in stock that day