Folding stock adapter
Sylvan Arms SA5 Pro AR15 Folding Stock Adapter (Opens To The Left)
A hinge between the lower receiver and the buffer tube: the tube and stock swing to the rifle's left, "off to the side with out the ejection port" (Sylvan Arms), and lock straight again unfolded. It moves the tube back 1.45 to 1.50 in, and the bolt extension it comes with, in the carrier's tail, makes up the length. The maker: "CNC-machined in the USA from 4140 Steel and only 9.4 ounces", "Adjustable Hinge Tension", "Improved and Hardened Buffer Pin", "2 QD attachment points", "Includes a 1045 Steel Bolt Extension"; "NOT COMPATIBLE WITH Tippmann 22, LWRC, Extar EP9". Engraved on its stock half: "Do Not Fire While Open".

- Weight
- 9.4 oz ± 0.05 oz Confirmedpublished: Sylvan Arms, SA5 Pro AR15 Folding Stock Adapter (SKU SA5P; "Direction of fold": "Adapter Opens To The Left"), the maker, read Oct 18, 2026
- Lowest price
- $189.99 at Primary Arms, read Nov 21, 2026, out of stock that day
- Maker's number
- SA5P-L
- Colour
- Black (placeholder)
- Drawn as
- modelled
- Maker's page
- sylvanarms.com
Added to “22RB .22 LR rifle”, a build on the start page, which has no folding stock adapter.
Its figures
Every figure the site draws and checks it by, with where it came from. Open one for each source's reading, and why one is used where they differ.
How far it moves the receiver extension back1.475 in ± 0.025 in 37.5 mmConfirmedPublished: Sylvan Arms, SA5 Pro AR15 Folding Stock Adapter, Q & A ("How much extra length does this add?", asked July 24, 2026; answered by the store manager the same day), the maker, read Oct 18, 2026
Published “It depends how the adapter times with the threads in your lower receiver, but it will be between 1.45 and 1.50 inches additional length.” used
Sylvan Arms, SA5 Pro AR15 Folding Stock Adapter, Q & A ("How much extra length does this add?", asked July 24, 2026; answered by the store manager the same day), the maker, read Oct 18, 2026 the page, harvested Oct 18, 2026
Photo 1.484 in ± 0.06 in
Sylvan Arms' DSC08599: a rifle standing muzzle up, its right side toward the lens, close; 2048 x 2048, harvested
Scale: the adapter's height across the bore, 0.737 + 1.421 in (.ring_r on Primary Arms' rear view, .body_bottom_below_axis on its open view), 270 px square to the bore. Read by the length on the right face from the castle nut's front (where the lower's green ends, row 777) to the stock half's rear face (where the end plate's flat begins, row 964), 187 px, at the height's scale. ± covers a 2% scale (the height's own readings) and 3 px at each end
The maker's own answer, the middle of its range; the photo, scaled by the part's height, agrees within it.
It screws into the lower where a receiver extension would, its own castle nut against the lower's rear face, and the extension screws into its rear half as into a lower: the stock half's rear face stands this far behind the lower's. The maker gives a range, as it times with the lower's thread.
Its length along the bore (its castle nut's front to the stock half's rear face)1.475 in ± 0.025 in 37.5 mmConfirmedWorked out: {.added_length}
Worked out 1.475 in ± 0.025 in used
{.added_length}, harvested
The castle nut bears on the lower's rear face (std.ar15.receiver_rear_x) and the stock half's rear face stands where a lower's would: as long as it moves the tube back. Its front thread reaches forward of it into the lower's ring.
Its castle nut, front face to rear (along the bore)0.221 in ± 0.02 in 5.6 mmProvisionalPhoto: Sylvan Arms' DSC08599: a rifle standing muzzle up, its right side toward the lens, close; 2048 x 2048
Photo 0.221 in ± 0.02 in used
Sylvan Arms' DSC08599: a rifle standing muzzle up, its right side toward the lens, close; 2048 x 2048, harvested
Scale: the length the maker says it adds (.added_length), read along the bore on the right face from the lower's rear face (the castle nut's front) to the stock half's rear face (the end plate's front): 187 px. Its height across the bore, from the ring's top to the face's bottom (.ring_r and .body_bottom_below_axis, the other two photos: 2.158 in), is 270 px square to the bore (the rifle leans 6.7 degrees in the picture): 125 px/in against the length's 126.8, 1.3% apart. Read by 28 of the 187 px (rows 777 to 805: the glossy notched ring between the lower's green and the receiver half's front face)
A notched ring on the adapter's own front thread, tightened against the lower's rear face (Monadnock Firearms' list: "Includes a castle nut wrench"). On the maker's photo of the right side it bears on the lower itself, with no end plate between.
The receiver half, front face to where the halves meet0.568 in ± 0.02 in 14.4 mmProvisionalPhoto: Sylvan Arms' DSC08599: a rifle standing muzzle up, its right side toward the lens, close; 2048 x 2048
Photo 0.568 in ± 0.02 in used
Sylvan Arms' DSC08599: a rifle standing muzzle up, its right side toward the lens, close; 2048 x 2048, harvested
Scale: the length the maker says it adds (.added_length), read along the bore on the right face from the lower's rear face (the castle nut's front) to the stock half's rear face (the end plate's front): 187 px. Its height across the bore, from the ring's top to the face's bottom (.ring_r and .body_bottom_below_axis, the other two photos: 2.158 in), is 270 px square to the bore (the rifle leans 6.7 degrees in the picture): 125 px/in against the length's 126.8, 1.3% apart. Read by 72 of the 187 px (rows 805 to 877: the receiver half's front face to the seam, a straight line across the right face)
Where the halves meet is taken as the hinge's plane (.hinge_x): opened flat (e6285ca2177b) their two mating faces lie in one plane side by side, which a seam ahead of or behind the axis would offset by twice its distance.
The stock half, where the halves meet to its rear face0.686 in ± 0.04 in 17.4 mmProvisionalWorked out: {.length} - {.nut_length} - {.receiver_half_length}
Worked out 0.686 in ± 0.04 in used
{.length} - {.nut_length} - {.receiver_half_length}, harvested
The rest of the length: 87 of the photo's 187 px (rows 877 to 964), 0.686 at its scale.
The hinge's axis behind the takedown pin1.914 in ± 0.04 in 48.6 mmProvisionalWorked out: 0in - {std.ar15.receiver_rear_x} + {.nut_length} + {.receiver_half_length}
Worked out 1.914 in ± 0.04 in used
0in - {std.ar15.receiver_rear_x} + {.nut_length} + {.receiver_half_length}, harvested
In the plane where the halves meet (.receiver_half_length's note): the lower's rear face (the Army's drawing), the castle nut and the receiver half behind it.
The hinge's axis out from the tube's axis, toward the side it folds to (the rifle's left)1.232 in ± 0.05 in 31.3 mmProvisionalPhoto: Primary Arms' SA5P-L_02: the adapter opened flat, 180 degrees, both mating faces toward a lens behind, right of and above it; 2000 x 1334
Photo 1.232 in ± 0.05 in used
Primary Arms' SA5P-L_02: the adapter opened flat, 180 degrees, both mating faces toward a lens behind, right of and above it; 2000 x 1334, harvested
Scale: the faces' plane rectified by the stock half's bore mouth on its mating face (a RANSAC ellipse on its rim's edges, 263.8 x 312.6 px at 170.2 degrees, rms 0.65 px), turned so the receiver half's bore centre (its rim's ellipse, 243.7 x 302.0 px, rms 0.57 px) is level with it, and scaled by the stock half's side away from the hinge standing .ring_r from its bore's centre (1.29 mouth radii there): the mouth comes out 1.142 across, the size of the threaded bore behind it. Read by half the bores' centres' distance, 2.464 in in the faces' plane (opened 180 degrees about the axis the two bores stand twice the axis's distance apart wherever the halves meet along the bore). The hinge's top knuckle's socket head, on the axis, reads 1.227 from the stock half's bore; the receiver half's ring's edge on the hinge side, the face's own edge there, reads 0.72 from its bore, the ring's radius. ± covers the scale (.ring_r's 3.4%) and the photo's perspective (the bottom edges of the two faces read 6 degrees off level in the frame levelled by the bores)
Opened flat about the hinge, the two halves' bores stand side by side twice this apart with the hinge midway: read on Primary Arms' open view. The side is the left: on every photo on file the hinge is on the part's left (the receiver half's right face carries the cover plate, the button and a QD socket on the maker's photo of a rifle's right side, 535513d34cb2), the maker's DSC08643 has the stock folded along a rifle's left side, and the maker: "Folding to the LEFT folds off to the side with out the ejection port."
How far the hinge turns before its own halves stop it180° ± 5°ProvisionalPhoto: Primary Arms' SA5P-L_02: the adapter opened flat, 180 degrees, both mating faces toward a lens behind, right of and above it; 2000 x 1334
Photo 180 deg ± 5 deg used
Primary Arms' SA5P-L_02: the adapter opened flat, 180 degrees, both mating faces toward a lens behind, right of and above it; 2000 x 1334, harvested
Scale: angles: both halves' bore rims read as ellipses of nearly one shape (0.84 and 0.81 of a circle) facing one way. Read by the two halves' mating faces in one plane, side by side
Opened flat on Primary Arms' photo the two halves' mating faces lie in one plane side by side, the knuckles between them; no page states an angle and no photo shows it turned past that. How far the stock itself goes on a rifle before it meets the receiver is the build's (the app works it out).
Its width across the rifle, the hinge included2.222 in ± 0.08 in 56.4 mmProvisionalWorked out: {.ring_r} + {.hinge_z} + {.knuckle_d} / 2
Worked out 2.222 in ± 0.08 in used
{.ring_r} + {.hinge_z} + {.knuckle_d} / 2, harvested
The body's side away from the hinge to the knuckles' outer face. The QD socket on the right face stands out beyond it (.qd_proud, assumed).
Its height2.158 in ± 0.06 in 54.8 mmProvisionalWorked out: {.ring_r} + {.body_bottom_below_axis}
Worked out 2.158 in ± 0.06 in used
{.ring_r} + {.body_bottom_below_axis}, harvested
The stock half's threaded bore: its thread's crests (what one sees through it)1.145 in ± 0.036 in 29.1 mmConfirmedWorked out: ({std.receiver_extension.thread_minor_d} + {std.receiver_extension.thread_major_d}) / 2
Worked out 1.1453 in ± 0.036 in used
({std.receiver_extension.thread_minor_d} + {std.receiver_extension.thread_major_d}) / 2, harvested
The scale of the rear view. The receiver extension screws into it as into a lower ("Standard 1-3/16” x 16 threading", the maker), so this is a 1 3/16-16 thread in a hole: its crests lie between the extension's own minor and major diameters (the Army's limits). Taken as the middle of the two, ± half their span.
The body's ring about the bore: its radius (its top) and its sides' distance from the bore at the bore's height0.737 in ± 0.025 in 18.7 mmProvisionalPhoto: Primary Arms' SA5P-L_01: the adapter closed, from behind, left and above; 2000 x 1334
Photo 0.737 in ± 0.025 in used
Primary Arms' SA5P-L_01: the adapter closed, from behind, left and above; 2000 x 1334, harvested
Scale: the stock half's rear face rectified by its threaded bore's rim (the edge where the bore goes dark, at the thread's crests: an ellipse 213.2 x 338.7 px at 13.2 degrees, fitted to 804 edge points) as .bore_thread_crest_d, and turned 30.9 degrees so the large hole stands under the bore (the two middle holes then level to 0.027 in: the turn is good to about 2.5 degrees). Read by the silhouette's right edge (the rifle's right) at the bore's height, its widest: 0.737 at 0.000 (0.729 at +0.10, 0.731 at -0.09). ± covers the scale's 3.1%
The body is round about the bore above it and flat-sided below (each half). Read at the side away from the hinge, where the rear view's silhouette is the rear face's own edge (the lens is on the hinge's side). Its top's edge reads 0.685 on the same view, along a bright line that is the edge's break catching the light (inside the edge by the break's width); the maker's side photo, scaled by the length added, has the height from the top to the bottom within 1.3% of this plus .body_bottom_below_axis.
The halves' mating faces' bottom edge, below the bore's axis1.421 in ± 0.04 in 36.1 mmProvisionalPhoto: Primary Arms' SA5P-L_02: the adapter opened flat, 180 degrees, both mating faces toward a lens behind, right of and above it; 2000 x 1334
Photo 1.421 in ± 0.04 in used
Primary Arms' SA5P-L_02: the adapter opened flat, 180 degrees, both mating faces toward a lens behind, right of and above it; 2000 x 1334, harvested
Scale: the faces' plane rectified by the stock half's bore mouth on its mating face (a RANSAC ellipse on its rim's edges, 263.8 x 312.6 px at 170.2 degrees, rms 0.65 px), turned so the receiver half's bore centre (its rim's ellipse, 243.7 x 302.0 px, rms 0.57 px) is level with it, and scaled by the stock half's side away from the hinge standing .ring_r from its bore's centre (1.29 mouth radii there): the mouth comes out 1.142 across, the size of the threaded bore behind it. Read by the stock half's face's bottom silhouette (the lens is above: the bottom's edge is the face's) from 0.34 in to the far side of the bore to 0.7 to the hinge's, in that frame turned 6 degrees so the edge is level (it reads 1.393 to 1.492 in the frame the bores level). The rear view's lobe reaches 1.409 below the bore (.lobe_r)
The mating faces' lower corners: their round0.3 in ± 0.08 in 7.6 mmProvisionalPhoto: Primary Arms' SA5P-L_02: the adapter opened flat, 180 degrees, both mating faces toward a lens behind, right of and above it; 2000 x 1334
Photo 0.3 in ± 0.08 in used
Primary Arms' SA5P-L_02: the adapter opened flat, 180 degrees, both mating faces toward a lens behind, right of and above it; 2000 x 1334, harvested
Scale: the faces' plane rectified by the stock half's bore mouth on its mating face (a RANSAC ellipse on its rim's edges, 263.8 x 312.6 px at 170.2 degrees, rms 0.65 px), turned so the receiver half's bore centre (its rim's ellipse, 243.7 x 302.0 px, rms 0.57 px) is level with it, and scaled by the stock half's side away from the hinge standing .ring_r from its bore's centre (1.29 mouth radii there): the mouth comes out 1.142 across, the size of the threaded bore behind it. Read by the stock half's face's far side leaves its straight line 0.95 below the bore and meets the bottom 0.43 from the bore's centre line (silhouette rows 740 to 860)
The stock half's rear face: its lower lobe's centre (the large hole's) below the bore's axis1.045 in ± 0.035 in 26.5 mmProvisionalPhoto: Primary Arms' SA5P-L_01: the adapter closed, from behind, left and above; 2000 x 1334
Photo 1.045 in ± 0.035 in used
Primary Arms' SA5P-L_01: the adapter closed, from behind, left and above; 2000 x 1334, harvested
Scale: the stock half's rear face rectified by its threaded bore's rim (the edge where the bore goes dark, at the thread's crests: an ellipse 213.2 x 338.7 px at 13.2 degrees, fitted to 804 edge points) as .bore_thread_crest_d, and turned 30.9 degrees so the large hole stands under the bore (the two middle holes then level to 0.027 in: the turn is good to about 2.5 degrees). Read by the large hole's ellipse (94.1 x 149.4 px) centre in the rectified face
The rear face is a teardrop: the ring about the bore and a lobe below it about the large hole, joined by straight sides tangent to both (they lean 20.4 degrees on the photo; tangent lines between the two circles lean 20.9).
The stock half's rear face: its lower lobe's radius about the large hole0.37 in ± 0.02 in 9.4 mmProvisionalPhoto: Primary Arms' SA5P-L_01: the adapter closed, from behind, left and above; 2000 x 1334
Photo 0.37 in ± 0.02 in used
Primary Arms' SA5P-L_01: the adapter closed, from behind, left and above; 2000 x 1334, harvested
Scale: the stock half's rear face rectified by its threaded bore's rim (the edge where the bore goes dark, at the thread's crests: an ellipse 213.2 x 338.7 px at 13.2 degrees, fitted to 804 edge points) as .bore_thread_crest_d, and turned 30.9 degrees so the large hole stands under the bore (the two middle holes then level to 0.027 in: the turn is good to about 2.5 degrees). Read by the rectified silhouette's lobe about the large hole's centre: 0.364 at its bottom (1.409 below the bore), 0.372 and 0.389 at 30 and 60 degrees round toward the rifle's right
The stock half's rear face: the large hole (in the lobe, under the bore)0.505 in ± 0.02 in 12.8 mmProvisionalPhoto: Primary Arms' SA5P-L_01: the adapter closed, from behind, left and above; 2000 x 1334
Photo 0.505 in ± 0.02 in used
Primary Arms' SA5P-L_01: the adapter closed, from behind, left and above; 2000 x 1334, harvested
Scale: the stock half's rear face rectified by its threaded bore's rim (the edge where the bore goes dark, at the thread's crests: an ellipse 213.2 x 338.7 px at 13.2 degrees, fitted to 804 edge points) as .bore_thread_crest_d, and turned 30.9 degrees so the large hole stands under the bore (the two middle holes then level to 0.027 in: the turn is good to about 2.5 degrees). Read by its ellipse's area in the rectified face (94.1 x 149.4 px)
The stock half's rear face: the two middle holes0.274 in ± 0.015 in 7 mmProvisionalPhoto: Primary Arms' SA5P-L_01: the adapter closed, from behind, left and above; 2000 x 1334
Photo 0.274 in ± 0.015 in used
Primary Arms' SA5P-L_01: the adapter closed, from behind, left and above; 2000 x 1334, harvested
Scale: the stock half's rear face rectified by its threaded bore's rim (the edge where the bore goes dark, at the thread's crests: an ellipse 213.2 x 338.7 px at 13.2 degrees, fitted to 804 edge points) as .bore_thread_crest_d, and turned 30.9 degrees so the large hole stands under the bore (the two middle holes then level to 0.027 in: the turn is good to about 2.5 degrees). Read by their ellipses' areas in the rectified face: 0.278 (the rifle's left) and 0.271 (its right)
The stock half's rear face: the middle holes' centres out from the bore's vertical0.334 in ± 0.02 in 8.5 mmProvisionalPhoto: Primary Arms' SA5P-L_01: the adapter closed, from behind, left and above; 2000 x 1334
Photo 0.334 in ± 0.02 in used
Primary Arms' SA5P-L_01: the adapter closed, from behind, left and above; 2000 x 1334, harvested
Scale: the stock half's rear face rectified by its threaded bore's rim (the edge where the bore goes dark, at the thread's crests: an ellipse 213.2 x 338.7 px at 13.2 degrees, fitted to 804 edge points) as .bore_thread_crest_d, and turned 30.9 degrees so the large hole stands under the bore (the two middle holes then level to 0.027 in: the turn is good to about 2.5 degrees). Read by 0.323 to the rifle's left and 0.345 to its right, rectified: their mean
The stock half's rear face: the middle holes' centres below the bore's axis0.745 in ± 0.02 in 18.9 mmProvisionalPhoto: Primary Arms' SA5P-L_01: the adapter closed, from behind, left and above; 2000 x 1334
Photo 0.745 in ± 0.02 in used
Primary Arms' SA5P-L_01: the adapter closed, from behind, left and above; 2000 x 1334, harvested
Scale: the stock half's rear face rectified by its threaded bore's rim (the edge where the bore goes dark, at the thread's crests: an ellipse 213.2 x 338.7 px at 13.2 degrees, fitted to 804 edge points) as .bore_thread_crest_d, and turned 30.9 degrees so the large hole stands under the bore (the two middle holes then level to 0.027 in: the turn is good to about 2.5 degrees). Read by 0.732 (left) and 0.759 (right), rectified: their mean
The stock half's rear face: the small hole (between the left middle hole and the large one)0.124 in ± 0.015 in 3.1 mmProvisionalPhoto: Primary Arms' SA5P-L_01: the adapter closed, from behind, left and above; 2000 x 1334
Photo 0.124 in ± 0.015 in used
Primary Arms' SA5P-L_01: the adapter closed, from behind, left and above; 2000 x 1334, harvested
Scale: the stock half's rear face rectified by its threaded bore's rim (the edge where the bore goes dark, at the thread's crests: an ellipse 213.2 x 338.7 px at 13.2 degrees, fitted to 804 edge points) as .bore_thread_crest_d, and turned 30.9 degrees so the large hole stands under the bore (the two middle holes then level to 0.027 in: the turn is good to about 2.5 degrees). Read by its ellipse's area (23.3 x 36.2 px) in the rectified face
The stock half's rear face: the small hole's centre out from the bore's vertical, toward the rifle's left0.098 in ± 0.02 in 2.5 mmProvisionalPhoto: Primary Arms' SA5P-L_01: the adapter closed, from behind, left and above; 2000 x 1334
Photo 0.098 in ± 0.02 in used
Primary Arms' SA5P-L_01: the adapter closed, from behind, left and above; 2000 x 1334, harvested
Scale: the stock half's rear face rectified by its threaded bore's rim (the edge where the bore goes dark, at the thread's crests: an ellipse 213.2 x 338.7 px at 13.2 degrees, fitted to 804 edge points) as .bore_thread_crest_d, and turned 30.9 degrees so the large hole stands under the bore (the two middle holes then level to 0.027 in: the turn is good to about 2.5 degrees). Read by its centre, rectified
The stock half's rear face: the small hole's centre below the bore's axis0.718 in ± 0.02 in 18.2 mmProvisionalPhoto: Primary Arms' SA5P-L_01: the adapter closed, from behind, left and above; 2000 x 1334
Photo 0.718 in ± 0.02 in used
Primary Arms' SA5P-L_01: the adapter closed, from behind, left and above; 2000 x 1334, harvested
Scale: the stock half's rear face rectified by its threaded bore's rim (the edge where the bore goes dark, at the thread's crests: an ellipse 213.2 x 338.7 px at 13.2 degrees, fitted to 804 edge points) as .bore_thread_crest_d, and turned 30.9 degrees so the large hole stands under the bore (the two middle holes then level to 0.027 in: the turn is good to about 2.5 degrees). Read by its centre, rectified
The large hole's depth0.4 in ± 0.15 in 10.2 mmProvisionalWorked out: An assumption for the drawing, not a reading: no view on file looks into it far enough to see its floor (dark on every photo).
Worked out 0.4 in ± 0.15 in used
An assumption for the drawing, not a reading: no view on file looks into it far enough to see its floor (dark on every photo)., harvested
The middle and small holes' depth0.25 in ± 0.1 in 6.3 mmProvisionalWorked out: An assumption for the drawing, not a reading: no view on file looks into them far enough to see their floors.
Worked out 0.25 in ± 0.1 in used
An assumption for the drawing, not a reading: no view on file looks into them far enough to see their floors., harvested
The receiver half's bore (what the buffer and the bolt extension pass)1.079 in ± 0.04 in 27.4 mmProvisionalPhoto: Primary Arms' SA5P-L_02: the adapter opened flat, 180 degrees, both mating faces toward a lens behind, right of and above it; 2000 x 1334
Photo 1.079 in ± 0.04 in used
Primary Arms' SA5P-L_02: the adapter opened flat, 180 degrees, both mating faces toward a lens behind, right of and above it; 2000 x 1334, harvested
Scale: the faces' plane rectified by the stock half's bore mouth on its mating face (a RANSAC ellipse on its rim's edges, 263.8 x 312.6 px at 170.2 degrees, rms 0.65 px), turned so the receiver half's bore centre (its rim's ellipse, 243.7 x 302.0 px, rms 0.57 px) is level with it, and scaled by the stock half's side away from the hinge standing .ring_r from its bore's centre (1.29 mouth radii there): the mouth comes out 1.142 across, the size of the threaded bore behind it. Read by its rim's ellipse's area (243.7 x 302.0 px) in the faces' plane
Its rim on the mating face; further in, Primary Arms' open view shows a ring with flats (the front thread's own end), which is drawn at the tube's bore (std.receiver_extension.bore_d).
The hinge's blocks: their top below the bore's axis (the floor of the gap between the halves' rings)0.217 in ± 0.03 in 5.5 mmProvisionalPhoto: Primary Arms' SA5P-L_02: the adapter opened flat, 180 degrees, both mating faces toward a lens behind, right of and above it; 2000 x 1334
Photo 0.217 in ± 0.03 in used
Primary Arms' SA5P-L_02: the adapter opened flat, 180 degrees, both mating faces toward a lens behind, right of and above it; 2000 x 1334, harvested
Scale: the faces' plane rectified by the stock half's bore mouth on its mating face (a RANSAC ellipse on its rim's edges, 263.8 x 312.6 px at 170.2 degrees, rms 0.65 px), turned so the receiver half's bore centre (its rim's ellipse, 243.7 x 302.0 px, rms 0.57 px) is level with it, and scaled by the stock half's side away from the hinge standing .ring_r from its bore's centre (1.29 mouth radii there): the mouth comes out 1.142 across, the size of the threaded bore behind it. Read by where the white gap between the rings ends (rows 598 to 615, columns 910 to 1000)
Below the rings each half carries a block out to the hinge on the rifle's left; opened flat, the white gap between the two rings ends on their top.
The hinge's knuckles and its knurled collar: their diameter0.505 in ± 0.04 in 12.8 mmProvisionalPhoto: Primary Arms' SA5P-L_02: the adapter opened flat, 180 degrees, both mating faces toward a lens behind, right of and above it; 2000 x 1334
Photo 0.505 in ± 0.04 in used
Primary Arms' SA5P-L_02: the adapter opened flat, 180 degrees, both mating faces toward a lens behind, right of and above it; 2000 x 1334, harvested
Scale: the faces' plane rectified by the stock half's bore mouth on its mating face (a RANSAC ellipse on its rim's edges, 263.8 x 312.6 px at 170.2 degrees, rms 0.65 px), turned so the receiver half's bore centre (its rim's ellipse, 243.7 x 302.0 px, rms 0.57 px) is level with it, and scaled by the stock half's side away from the hinge standing .ring_r from its bore's centre (1.29 mouth radii there): the mouth comes out 1.142 across, the size of the threaded bore behind it. Read by the top knuckle's silhouette across, columns 850 to 969 (119 px; the knurled collar under it 118 px)
The top knuckle's lower end (the knurled collar's window's top) below the bore's axis0.579 in ± 0.03 in 14.7 mmProvisionalPhoto: Primary Arms' SA5P-L_02: the adapter opened flat, 180 degrees, both mating faces toward a lens behind, right of and above it; 2000 x 1334
Photo 0.579 in ± 0.03 in used
Primary Arms' SA5P-L_02: the adapter opened flat, 180 degrees, both mating faces toward a lens behind, right of and above it; 2000 x 1334, harvested
Scale: the faces' plane rectified by the stock half's bore mouth on its mating face (a RANSAC ellipse on its rim's edges, 263.8 x 312.6 px at 170.2 degrees, rms 0.65 px), turned so the receiver half's bore centre (its rim's ellipse, 243.7 x 302.0 px, rms 0.57 px) is level with it, and scaled by the stock half's side away from the hinge standing .ring_r from its bore's centre (1.29 mouth radii there): the mouth comes out 1.142 across, the size of the threaded bore behind it. Read by the window's top edge, row 703 at column 880
Top to bottom on the axis: the top knuckle from the blocks' top down to here, the knurled collar in a window to .collar_bottom_below_axis, the bottom knuckle from there to the faces' bottom. The top knuckle carries the hinge bolt's socket head.
The knurled collar's window's lower end (the bottom knuckle's top) below the bore's axis1.109 in ± 0.03 in 28.2 mmProvisionalPhoto: Primary Arms' SA5P-L_02: the adapter opened flat, 180 degrees, both mating faces toward a lens behind, right of and above it; 2000 x 1334
Photo 1.109 in ± 0.03 in used
Primary Arms' SA5P-L_02: the adapter opened flat, 180 degrees, both mating faces toward a lens behind, right of and above it; 2000 x 1334, harvested
Scale: the faces' plane rectified by the stock half's bore mouth on its mating face (a RANSAC ellipse on its rim's edges, 263.8 x 312.6 px at 170.2 degrees, rms 0.65 px), turned so the receiver half's bore centre (its rim's ellipse, 243.7 x 302.0 px, rms 0.57 px) is level with it, and scaled by the stock half's side away from the hinge standing .ring_r from its bore's centre (1.29 mouth radii there): the mouth comes out 1.142 across, the size of the threaded bore behind it. Read by the ledge under the collar, its top edge at row 847 at column 880
The hinge bolt's socket head in the top knuckle's top: its diameter0.26 in ± 0.04 in 6.6 mmProvisionalPhoto: Primary Arms' SA5P-L_02: the adapter opened flat, 180 degrees, both mating faces toward a lens behind, right of and above it; 2000 x 1334
Photo 0.26 in ± 0.04 in used
Primary Arms' SA5P-L_02: the adapter opened flat, 180 degrees, both mating faces toward a lens behind, right of and above it; 2000 x 1334, harvested
Scale: the faces' plane rectified by the stock half's bore mouth on its mating face (a RANSAC ellipse on its rim's edges, 263.8 x 312.6 px at 170.2 degrees, rms 0.65 px), turned so the receiver half's bore centre (its rim's ellipse, 243.7 x 302.0 px, rms 0.57 px) is level with it, and scaled by the stock half's side away from the hinge standing .ring_r from its bore's centre (1.29 mouth radii there): the mouth comes out 1.142 across, the size of the threaded bore behind it. Read by the head's top across (about 62 px), seen from above the knuckle
The hinge bolt's hex socket, across its flats0.1 in ± 0.03 in 2.5 mmProvisionalPhoto: Primary Arms' SA5P-L_02: the adapter opened flat, 180 degrees, both mating faces toward a lens behind, right of and above it; 2000 x 1334
Photo 0.1 in ± 0.03 in used
Primary Arms' SA5P-L_02: the adapter opened flat, 180 degrees, both mating faces toward a lens behind, right of and above it; 2000 x 1334, harvested
Scale: the faces' plane rectified by the stock half's bore mouth on its mating face (a RANSAC ellipse on its rim's edges, 263.8 x 312.6 px at 170.2 degrees, rms 0.65 px), turned so the receiver half's bore centre (its rim's ellipse, 243.7 x 302.0 px, rms 0.57 px) is level with it, and scaled by the stock half's side away from the hinge standing .ring_r from its bore's centre (1.29 mouth radii there): the mouth comes out 1.142 across, the size of the threaded bore behind it. Read by the dark socket across (about 24 px)
How far the bolt's head is sunk under the knuckle's top0.02 in ± 0.02 in 0.5 mmProvisionalWorked out: An assumption for the drawing, not a reading: the photos see the head's top and the knuckle's rim round it from above, not in profile.
Worked out 0.02 in ± 0.02 in used
An assumption for the drawing, not a reading: the photos see the head's top and the knuckle's rim round it from above, not in profile., harvested
The bolt head's height in its counterbore0.08 in ± 0.04 in 2 mmProvisionalWorked out: An assumption for the drawing, not a reading: no view on file shows it in profile.
Worked out 0.08 in ± 0.04 in used
An assumption for the drawing, not a reading: no view on file shows it in profile., harvested
The bolt head's hex socket's depth0.06 in ± 0.03 in 1.5 mmProvisionalWorked out: An assumption for the drawing, not a reading: dark on every photo.
Worked out 0.06 in ± 0.03 in used
An assumption for the drawing, not a reading: dark on every photo., harvested
The castle nut's outside diameter1.42 in ± 0.06 in 36.1 mmProvisionalPhoto: Sylvan Arms' DSC08599: a rifle standing muzzle up, its right side toward the lens, close; 2048 x 2048
Photo 1.42 in ± 0.06 in used
Sylvan Arms' DSC08599: a rifle standing muzzle up, its right side toward the lens, close; 2048 x 2048, harvested
Scale: the length the maker says it adds (.added_length), read along the bore on the right face from the lower's rear face (the castle nut's front) to the stock half's rear face (the end plate's front): 187 px. Its height across the bore, from the ring's top to the face's bottom (.ring_r and .body_bottom_below_axis, the other two photos: 2.158 in), is 270 px square to the bore (the rifle leans 6.7 degrees in the picture): 125 px/in against the length's 126.8, 1.3% apart. Read by its top edge (the rifle's top) 3 px, 0.025 in, under the body's top beside it (the rifle's lean taken out): twice .ring_r less that. Its lower edge is behind the grip
The castle nut's notches4ProvisionalWorked out: An assumption for the drawing, not a count: four at 90 degrees, as two seen a quarter turn apart in each of two views from opposite corners allow.
Worked out 4 count used
An assumption for the drawing, not a count: four at 90 degrees, as two seen a quarter turn apart in each of two views from opposite corners allow., harvested
Not counted: no photo shows the whole turn. Two are seen 90 degrees apart from the front and right (AR15Discounts' 307151, 1191d2a72083), two from behind and left (e6285ca2177b, 87600342169f).
The castle nut's notches: their width0.14 in ± 0.04 in 3.6 mmProvisionalWorked out: An assumption for the drawing, not a reading: the notches are seen only obliquely (about a tenth of the nut's circumference on 1191d2a72083).
Worked out 0.14 in ± 0.04 in used
An assumption for the drawing, not a reading: the notches are seen only obliquely (about a tenth of the nut's circumference on 1191d2a72083)., harvested
The castle nut's notches: their depth in from its rim (each through its length)0.06 in ± 0.03 in 1.5 mmProvisionalWorked out: An assumption for the drawing, not a reading: no view on file shows them in profile.
Worked out 0.06 in ± 0.03 in used
An assumption for the drawing, not a reading: no view on file shows them in profile., harvested
The stock half's hinge block: how far it reaches back from where the halves meet0.5 in ± 0.15 in 12.7 mmProvisionalWorked out: An assumption for the drawing, not a reading: the rear view sees the block's outer face end on, at another depth than the rear face the photo is scaled in.
Worked out 0.5 in ± 0.15 in used
An assumption for the drawing, not a reading: the rear view sees the block's outer face end on, at another depth than the rear face the photo is scaled in., harvested
Under the ring on the rifle's left the stock half carries a block out to the hinge (87600342169f has its outer face behind the knuckles, a little forward of the rear face); where it ends along the bore isn't read on any view.
The stock half's locking tab (on its mating face): its centre out from the bore's vertical, toward the rifle's right0.351 in ± 0.04 in 8.9 mmProvisionalPhoto: Primary Arms' SA5P-L_02: the adapter opened flat, 180 degrees, both mating faces toward a lens behind, right of and above it; 2000 x 1334
Photo 0.351 in ± 0.04 in used
Primary Arms' SA5P-L_02: the adapter opened flat, 180 degrees, both mating faces toward a lens behind, right of and above it; 2000 x 1334, harvested
Scale: the faces' plane rectified by the stock half's bore mouth on its mating face (a RANSAC ellipse on its rim's edges, 263.8 x 312.6 px at 170.2 degrees, rms 0.65 px), turned so the receiver half's bore centre (its rim's ellipse, 243.7 x 302.0 px, rms 0.57 px) is level with it, and scaled by the stock half's side away from the hinge standing .ring_r from its bore's centre (1.29 mouth radii there): the mouth comes out 1.142 across, the size of the threaded bore behind it. Read by its base's centre (its end face's centre, 501, 706 px, moved back along the depth's direction by its height off the face)
A block standing out of the stock half's mating face low on the side away from the hinge; closed, it goes into a slot in the receiver half's rear face beside the release button ("Improved Locking Mechanism", the maker). Read on Primary Arms' open view: its end face and where its side meets the face.
The stock half's locking tab: its centre below the bore's axis0.721 in ± 0.04 in 18.3 mmProvisionalPhoto: Primary Arms' SA5P-L_02: the adapter opened flat, 180 degrees, both mating faces toward a lens behind, right of and above it; 2000 x 1334
Photo 0.721 in ± 0.04 in used
Primary Arms' SA5P-L_02: the adapter opened flat, 180 degrees, both mating faces toward a lens behind, right of and above it; 2000 x 1334, harvested
Scale: the faces' plane rectified by the stock half's bore mouth on its mating face (a RANSAC ellipse on its rim's edges, 263.8 x 312.6 px at 170.2 degrees, rms 0.65 px), turned so the receiver half's bore centre (its rim's ellipse, 243.7 x 302.0 px, rms 0.57 px) is level with it, and scaled by the stock half's side away from the hinge standing .ring_r from its bore's centre (1.29 mouth radii there): the mouth comes out 1.142 across, the size of the threaded bore behind it. Read by as .tab_out
The stock half's locking tab: its width across the rifle0.16 in ± 0.03 in 4.1 mmProvisionalPhoto: Primary Arms' SA5P-L_02: the adapter opened flat, 180 degrees, both mating faces toward a lens behind, right of and above it; 2000 x 1334
Photo 0.16 in ± 0.03 in used
Primary Arms' SA5P-L_02: the adapter opened flat, 180 degrees, both mating faces toward a lens behind, right of and above it; 2000 x 1334, harvested
Scale: the faces' plane rectified by the stock half's bore mouth on its mating face (a RANSAC ellipse on its rim's edges, 263.8 x 312.6 px at 170.2 degrees, rms 0.65 px), turned so the receiver half's bore centre (its rim's ellipse, 243.7 x 302.0 px, rms 0.57 px) is level with it, and scaled by the stock half's side away from the hinge standing .ring_r from its bore's centre (1.29 mouth radii there): the mouth comes out 1.142 across, the size of the threaded bore behind it. Read by its end face across, 38 px
The stock half's locking tab: its height0.39 in ± 0.03 in 9.9 mmProvisionalPhoto: Primary Arms' SA5P-L_02: the adapter opened flat, 180 degrees, both mating faces toward a lens behind, right of and above it; 2000 x 1334
Photo 0.39 in ± 0.03 in used
Primary Arms' SA5P-L_02: the adapter opened flat, 180 degrees, both mating faces toward a lens behind, right of and above it; 2000 x 1334, harvested
Scale: the faces' plane rectified by the stock half's bore mouth on its mating face (a RANSAC ellipse on its rim's edges, 263.8 x 312.6 px at 170.2 degrees, rms 0.65 px), turned so the receiver half's bore centre (its rim's ellipse, 243.7 x 302.0 px, rms 0.57 px) is level with it, and scaled by the stock half's side away from the hinge standing .ring_r from its bore's centre (1.29 mouth radii there): the mouth comes out 1.142 across, the size of the threaded bore behind it. Read by its end face up and down, rows 653 to 760
The stock half's locking tab: how far it stands out of the face0.17 in ± 0.05 in 4.3 mmProvisionalPhoto: Primary Arms' SA5P-L_02: the adapter opened flat, 180 degrees, both mating faces toward a lens behind, right of and above it; 2000 x 1334
Photo 0.17 in ± 0.05 in used
Primary Arms' SA5P-L_02: the adapter opened flat, 180 degrees, both mating faces toward a lens behind, right of and above it; 2000 x 1334, harvested
Scale: the depth's direction in the photo: the receiver half's front thread, 1.245 in from its face to its end, runs (222, -100) px an inch. Read by its end face stands 38 px off its base along that direction
The receiver half's slot for the locking tab (its rear face): its centre out from the bore's vertical, toward the rifle's right0.43 in ± 0.04 in 10.9 mmProvisionalPhoto: Primary Arms' SA5P-L_02: the adapter opened flat, 180 degrees, both mating faces toward a lens behind, right of and above it; 2000 x 1334
Photo 0.43 in ± 0.04 in used
Primary Arms' SA5P-L_02: the adapter opened flat, 180 degrees, both mating faces toward a lens behind, right of and above it; 2000 x 1334, harvested
Scale: the faces' plane rectified by the stock half's bore mouth on its mating face (a RANSAC ellipse on its rim's edges, 263.8 x 312.6 px at 170.2 degrees, rms 0.65 px), turned so the receiver half's bore centre (its rim's ellipse, 243.7 x 302.0 px, rms 0.57 px) is level with it, and scaled by the stock half's side away from the hinge standing .ring_r from its bore's centre (1.29 mouth radii there): the mouth comes out 1.142 across, the size of the threaded bore behind it. Read by the oval slot's centre (1290, 825 px) against the receiver half's bore's
Read on its own: 0.08 in further out than the tab it takes and 0.07 lower; the pocket drawn takes in both.
The receiver half's slot for the locking tab: its centre below the bore's axis0.79 in ± 0.04 in 20.1 mmProvisionalPhoto: Primary Arms' SA5P-L_02: the adapter opened flat, 180 degrees, both mating faces toward a lens behind, right of and above it; 2000 x 1334
Photo 0.79 in ± 0.04 in used
Primary Arms' SA5P-L_02: the adapter opened flat, 180 degrees, both mating faces toward a lens behind, right of and above it; 2000 x 1334, harvested
Scale: the faces' plane rectified by the stock half's bore mouth on its mating face (a RANSAC ellipse on its rim's edges, 263.8 x 312.6 px at 170.2 degrees, rms 0.65 px), turned so the receiver half's bore centre (its rim's ellipse, 243.7 x 302.0 px, rms 0.57 px) is level with it, and scaled by the stock half's side away from the hinge standing .ring_r from its bore's centre (1.29 mouth radii there): the mouth comes out 1.142 across, the size of the threaded bore behind it. Read by as .slot_out
The receiver half's rear face: the socket screw's centre out toward the rifle's right0.578 in ± 0.04 in 14.7 mmProvisionalPhoto: Primary Arms' SA5P-L_02: the adapter opened flat, 180 degrees, both mating faces toward a lens behind, right of and above it; 2000 x 1334
Photo 0.578 in ± 0.04 in used
Primary Arms' SA5P-L_02: the adapter opened flat, 180 degrees, both mating faces toward a lens behind, right of and above it; 2000 x 1334, harvested
Scale: the faces' plane rectified by the stock half's bore mouth on its mating face (a RANSAC ellipse on its rim's edges, 263.8 x 312.6 px at 170.2 degrees, rms 0.65 px), turned so the receiver half's bore centre (its rim's ellipse, 243.7 x 302.0 px, rms 0.57 px) is level with it, and scaled by the stock half's side away from the hinge standing .ring_r from its bore's centre (1.29 mouth radii there): the mouth comes out 1.142 across, the size of the threaded bore behind it. Read by its head's centre (1330, 735 px) against the bore's
Three things on the receiver half's mating face besides the slot, seen when folded: a socket screw above the slot, a large hex socket under the bore and a round hole toward the hinge (Primary Arms' open view).
The receiver half's rear face: the socket screw's centre below the bore's axis0.441 in ± 0.04 in 11.2 mmProvisionalPhoto: Primary Arms' SA5P-L_02: the adapter opened flat, 180 degrees, both mating faces toward a lens behind, right of and above it; 2000 x 1334
Photo 0.441 in ± 0.04 in used
Primary Arms' SA5P-L_02: the adapter opened flat, 180 degrees, both mating faces toward a lens behind, right of and above it; 2000 x 1334, harvested
Scale: the faces' plane rectified by the stock half's bore mouth on its mating face (a RANSAC ellipse on its rim's edges, 263.8 x 312.6 px at 170.2 degrees, rms 0.65 px), turned so the receiver half's bore centre (its rim's ellipse, 243.7 x 302.0 px, rms 0.57 px) is level with it, and scaled by the stock half's side away from the hinge standing .ring_r from its bore's centre (1.29 mouth radii there): the mouth comes out 1.142 across, the size of the threaded bore behind it. Read by as .rear_screw_out
The receiver half's rear face: the socket screw's head0.19 in ± 0.03 in 4.8 mmProvisionalPhoto: Primary Arms' SA5P-L_02: the adapter opened flat, 180 degrees, both mating faces toward a lens behind, right of and above it; 2000 x 1334
Photo 0.19 in ± 0.03 in used
Primary Arms' SA5P-L_02: the adapter opened flat, 180 degrees, both mating faces toward a lens behind, right of and above it; 2000 x 1334, harvested
Scale: the faces' plane rectified by the stock half's bore mouth on its mating face (a RANSAC ellipse on its rim's edges, 263.8 x 312.6 px at 170.2 degrees, rms 0.65 px), turned so the receiver half's bore centre (its rim's ellipse, 243.7 x 302.0 px, rms 0.57 px) is level with it, and scaled by the stock half's side away from the hinge standing .ring_r from its bore's centre (1.29 mouth radii there): the mouth comes out 1.142 across, the size of the threaded bore behind it. Read by its head across, about 45 px
The receiver half's rear face: the large hex socket's centre out toward the rifle's right0.065 in ± 0.04 in 1.7 mmProvisionalPhoto: Primary Arms' SA5P-L_02: the adapter opened flat, 180 degrees, both mating faces toward a lens behind, right of and above it; 2000 x 1334
Photo 0.065 in ± 0.04 in used
Primary Arms' SA5P-L_02: the adapter opened flat, 180 degrees, both mating faces toward a lens behind, right of and above it; 2000 x 1334, harvested
Scale: the faces' plane rectified by the stock half's bore mouth on its mating face (a RANSAC ellipse on its rim's edges, 263.8 x 312.6 px at 170.2 degrees, rms 0.65 px), turned so the receiver half's bore centre (its rim's ellipse, 243.7 x 302.0 px, rms 0.57 px) is level with it, and scaled by the stock half's side away from the hinge standing .ring_r from its bore's centre (1.29 mouth radii there): the mouth comes out 1.142 across, the size of the threaded bore behind it. Read by its centre (1200, 890 px) against the bore's
The receiver half's rear face: the large hex socket's centre below the bore's axis1.083 in ± 0.04 in 27.5 mmProvisionalPhoto: Primary Arms' SA5P-L_02: the adapter opened flat, 180 degrees, both mating faces toward a lens behind, right of and above it; 2000 x 1334
Photo 1.083 in ± 0.04 in used
Primary Arms' SA5P-L_02: the adapter opened flat, 180 degrees, both mating faces toward a lens behind, right of and above it; 2000 x 1334, harvested
Scale: the faces' plane rectified by the stock half's bore mouth on its mating face (a RANSAC ellipse on its rim's edges, 263.8 x 312.6 px at 170.2 degrees, rms 0.65 px), turned so the receiver half's bore centre (its rim's ellipse, 243.7 x 302.0 px, rms 0.57 px) is level with it, and scaled by the stock half's side away from the hinge standing .ring_r from its bore's centre (1.29 mouth radii there): the mouth comes out 1.142 across, the size of the threaded bore behind it. Read by as .rear_hex_out
The receiver half's rear face: the large hex socket's bore0.26 in ± 0.03 in 6.6 mmProvisionalPhoto: Primary Arms' SA5P-L_02: the adapter opened flat, 180 degrees, both mating faces toward a lens behind, right of and above it; 2000 x 1334
Photo 0.26 in ± 0.03 in used
Primary Arms' SA5P-L_02: the adapter opened flat, 180 degrees, both mating faces toward a lens behind, right of and above it; 2000 x 1334, harvested
Scale: the faces' plane rectified by the stock half's bore mouth on its mating face (a RANSAC ellipse on its rim's edges, 263.8 x 312.6 px at 170.2 degrees, rms 0.65 px), turned so the receiver half's bore centre (its rim's ellipse, 243.7 x 302.0 px, rms 0.57 px) is level with it, and scaled by the stock half's side away from the hinge standing .ring_r from its bore's centre (1.29 mouth radii there): the mouth comes out 1.142 across, the size of the threaded bore behind it. Read by its rim across, about 60 px
The receiver half's rear face: the round hole's centre out toward the hinge (the rifle's left)0.371 in ± 0.04 in 9.4 mmProvisionalPhoto: Primary Arms' SA5P-L_02: the adapter opened flat, 180 degrees, both mating faces toward a lens behind, right of and above it; 2000 x 1334
Photo 0.371 in ± 0.04 in used
Primary Arms' SA5P-L_02: the adapter opened flat, 180 degrees, both mating faces toward a lens behind, right of and above it; 2000 x 1334, harvested
Scale: the faces' plane rectified by the stock half's bore mouth on its mating face (a RANSAC ellipse on its rim's edges, 263.8 x 312.6 px at 170.2 degrees, rms 0.65 px), turned so the receiver half's bore centre (its rim's ellipse, 243.7 x 302.0 px, rms 0.57 px) is level with it, and scaled by the stock half's side away from the hinge standing .ring_r from its bore's centre (1.29 mouth radii there): the mouth comes out 1.142 across, the size of the threaded bore behind it. Read by its centre (1100, 860 px) against the bore's
The receiver half's rear face: the round hole's centre below the bore's axis1.03 in ± 0.04 in 26.2 mmProvisionalPhoto: Primary Arms' SA5P-L_02: the adapter opened flat, 180 degrees, both mating faces toward a lens behind, right of and above it; 2000 x 1334
Photo 1.03 in ± 0.04 in used
Primary Arms' SA5P-L_02: the adapter opened flat, 180 degrees, both mating faces toward a lens behind, right of and above it; 2000 x 1334, harvested
Scale: the faces' plane rectified by the stock half's bore mouth on its mating face (a RANSAC ellipse on its rim's edges, 263.8 x 312.6 px at 170.2 degrees, rms 0.65 px), turned so the receiver half's bore centre (its rim's ellipse, 243.7 x 302.0 px, rms 0.57 px) is level with it, and scaled by the stock half's side away from the hinge standing .ring_r from its bore's centre (1.29 mouth radii there): the mouth comes out 1.142 across, the size of the threaded bore behind it. Read by as .rear_hole_in
The receiver half's rear face: the round hole0.21 in ± 0.03 in 5.3 mmProvisionalPhoto: Primary Arms' SA5P-L_02: the adapter opened flat, 180 degrees, both mating faces toward a lens behind, right of and above it; 2000 x 1334
Photo 0.21 in ± 0.03 in used
Primary Arms' SA5P-L_02: the adapter opened flat, 180 degrees, both mating faces toward a lens behind, right of and above it; 2000 x 1334, harvested
Scale: the faces' plane rectified by the stock half's bore mouth on its mating face (a RANSAC ellipse on its rim's edges, 263.8 x 312.6 px at 170.2 degrees, rms 0.65 px), turned so the receiver half's bore centre (its rim's ellipse, 243.7 x 302.0 px, rms 0.57 px) is level with it, and scaled by the stock half's side away from the hinge standing .ring_r from its bore's centre (1.29 mouth radii there): the mouth comes out 1.142 across, the size of the threaded bore behind it. Read by its rim across, about 50 px
The mating faces' holes, the tab's slot and the screw's counterbore: their depth0.25 in ± 0.1 in 6.3 mmProvisionalWorked out: An assumption for the drawing, not a reading: dark on the photo.
Worked out 0.25 in ± 0.1 in used
An assumption for the drawing, not a reading: dark on the photo., harvested
The right face's cover plate: its front end behind the receiver half's front face0.134 in ± 0.02 in 3.4 mmProvisionalPhoto: Sylvan Arms' DSC08599: a rifle standing muzzle up, its right side toward the lens, close; 2048 x 2048
Photo 0.134 in ± 0.02 in used
Sylvan Arms' DSC08599: a rifle standing muzzle up, its right side toward the lens, close; 2048 x 2048, harvested
Scale: the length the maker says it adds (.added_length), read along the bore on the right face from the lower's rear face (the castle nut's front) to the stock half's rear face (the end plate's front): 187 px. Its height across the bore, from the ring's top to the face's bottom (.ring_r and .body_bottom_below_axis, the other two photos: 2.158 in), is 270 px square to the bore (the rifle leans 6.7 degrees in the picture): 125 px/in against the length's 126.8, 1.3% apart. Read by rows 805 to 822
A rounded plate on the receiver half's right face (the release's cover), its lower end under the button.
The right face's cover plate: its length along the bore0.42 in ± 0.03 in 10.7 mmProvisionalPhoto: Sylvan Arms' DSC08599: a rifle standing muzzle up, its right side toward the lens, close; 2048 x 2048
Photo 0.42 in ± 0.03 in used
Sylvan Arms' DSC08599: a rifle standing muzzle up, its right side toward the lens, close; 2048 x 2048, harvested
Scale: the length the maker says it adds (.added_length), read along the bore on the right face from the lower's rear face (the castle nut's front) to the stock half's rear face (the end plate's front): 187 px. Its height across the bore, from the ring's top to the face's bottom (.ring_r and .body_bottom_below_axis, the other two photos: 2.158 in), is 270 px square to the bore (the rifle leans 6.7 degrees in the picture): 125 px/in against the length's 126.8, 1.3% apart. Read by rows 822 to 875
The right face's cover plate: its upper end above the bore's axis0.06 in ± 0.03 in 1.5 mmProvisionalPhoto: Sylvan Arms' DSC08599: a rifle standing muzzle up, its right side toward the lens, close; 2048 x 2048
Photo 0.06 in ± 0.03 in used
Sylvan Arms' DSC08599: a rifle standing muzzle up, its right side toward the lens, close; 2048 x 2048, harvested
Scale: the length the maker says it adds (.added_length), read along the bore on the right face from the lower's rear face (the castle nut's front) to the stock half's rear face (the end plate's front): 187 px. Its height across the bore, from the ring's top to the face's bottom (.ring_r and .body_bottom_below_axis, the other two photos: 2.158 in), is 270 px square to the bore (the rifle leans 6.7 degrees in the picture): 125 px/in against the length's 126.8, 1.3% apart. Read by 0.674 under the body's top (column 857 against 772, the rifle's lean taken out), less .ring_r's 0.737
The right face's cover plate: its lower end below the bore's axis0.8 in ± 0.04 in 20.3 mmProvisionalPhoto: Sylvan Arms' DSC08599: a rifle standing muzzle up, its right side toward the lens, close; 2048 x 2048
Photo 0.8 in ± 0.04 in used
Sylvan Arms' DSC08599: a rifle standing muzzle up, its right side toward the lens, close; 2048 x 2048, harvested
Scale: the length the maker says it adds (.added_length), read along the bore on the right face from the lower's rear face (the castle nut's front) to the stock half's rear face (the end plate's front): 187 px. Its height across the bore, from the ring's top to the face's bottom (.ring_r and .body_bottom_below_axis, the other two photos: 2.158 in), is 270 px square to the bore (the rifle leans 6.7 degrees in the picture): 125 px/in against the length's 126.8, 1.3% apart. Read by its rounded lower end round the button, column 970: 1.567 under the body's top
The cover plate's thickness proud of the face0.03 in ± 0.015 in 0.8 mmProvisionalWorked out: An assumption for the drawing, not a reading: no view on file shows it in profile.
Worked out 0.03 in ± 0.015 in used
An assumption for the drawing, not a reading: no view on file shows it in profile., harvested
The release button's head (in the cover plate's lower end)0.28 in ± 0.03 in 7.1 mmProvisionalPhoto: Sylvan Arms' DSC08599: a rifle standing muzzle up, its right side toward the lens, close; 2048 x 2048
Photo 0.28 in ± 0.03 in used
Sylvan Arms' DSC08599: a rifle standing muzzle up, its right side toward the lens, close; 2048 x 2048, harvested
Scale: the length the maker says it adds (.added_length), read along the bore on the right face from the lower's rear face (the castle nut's front) to the stock half's rear face (the end plate's front): 187 px. Its height across the bore, from the ring's top to the face's bottom (.ring_r and .body_bottom_below_axis, the other two photos: 2.158 in), is 270 px square to the bore (the rifle leans 6.7 degrees in the picture): 125 px/in against the length's 126.8, 1.3% apart. Read by its round head, 36 px across
The release button's centre below the bore's axis0.68 in ± 0.03 in 17.3 mmProvisionalPhoto: Sylvan Arms' DSC08599: a rifle standing muzzle up, its right side toward the lens, close; 2048 x 2048
Photo 0.68 in ± 0.03 in used
Sylvan Arms' DSC08599: a rifle standing muzzle up, its right side toward the lens, close; 2048 x 2048, harvested
Scale: the length the maker says it adds (.added_length), read along the bore on the right face from the lower's rear face (the castle nut's front) to the stock half's rear face (the end plate's front): 187 px. Its height across the bore, from the ring's top to the face's bottom (.ring_r and .body_bottom_below_axis, the other two photos: 2.158 in), is 270 px square to the bore (the rifle leans 6.7 degrees in the picture): 125 px/in against the length's 126.8, 1.3% apart. Read by column 952: 1.42 under the body's top, less .ring_r
The release button's centre behind the receiver half's front face0.39 in ± 0.03 in 9.9 mmProvisionalPhoto: Sylvan Arms' DSC08599: a rifle standing muzzle up, its right side toward the lens, close; 2048 x 2048
Photo 0.39 in ± 0.03 in used
Sylvan Arms' DSC08599: a rifle standing muzzle up, its right side toward the lens, close; 2048 x 2048, harvested
Scale: the length the maker says it adds (.added_length), read along the bore on the right face from the lower's rear face (the castle nut's front) to the stock half's rear face (the end plate's front): 187 px. Its height across the bore, from the ring's top to the face's bottom (.ring_r and .body_bottom_below_axis, the other two photos: 2.158 in), is 270 px square to the bore (the rifle leans 6.7 degrees in the picture): 125 px/in against the length's 126.8, 1.3% apart. Read by row 855 against the front face's 805
How far the button's head stands out of the cover plate0.06 in ± 0.03 in 1.5 mmProvisionalWorked out: An assumption for the drawing, not a reading: the side photos see its face; Primary Arms' open view has the pin pushed out of it (0.4 in or more), as it is when the stock is open to fold.
Worked out 0.06 in ± 0.03 in used
An assumption for the drawing, not a reading: the side photos see its face; Primary Arms' open view has the pin pushed out of it (0.4 in or more), as it is when the stock is open to fold., harvested
The right face's QD socket: its outside diameter0.44 in ± 0.04 in 11.2 mmProvisionalPhoto: Sylvan Arms' DSC08599: a rifle standing muzzle up, its right side toward the lens, close; 2048 x 2048
Photo 0.44 in ± 0.04 in used
Sylvan Arms' DSC08599: a rifle standing muzzle up, its right side toward the lens, close; 2048 x 2048, harvested
Scale: the length the maker says it adds (.added_length), read along the bore on the right face from the lower's rear face (the castle nut's front) to the stock half's rear face (the end plate's front): 187 px. Its height across the bore, from the ring's top to the face's bottom (.ring_r and .body_bottom_below_axis, the other two photos: 2.158 in), is 270 px square to the bore (the rifle leans 6.7 degrees in the picture): 125 px/in against the length's 126.8, 1.3% apart. Read by its boss's round end, 56 px across
"2 QD attachment points" (the maker): one in a boss out of the receiver half's right face, low, by the seam; the other is taken as the large hole in the stock half's rear lobe.
The right face's QD socket: its bore0.31 in ± 0.04 in 7.9 mmProvisionalPhoto: Sylvan Arms' DSC08599: a rifle standing muzzle up, its right side toward the lens, close; 2048 x 2048
Photo 0.31 in ± 0.04 in used
Sylvan Arms' DSC08599: a rifle standing muzzle up, its right side toward the lens, close; 2048 x 2048, harvested
Scale: the length the maker says it adds (.added_length), read along the bore on the right face from the lower's rear face (the castle nut's front) to the stock half's rear face (the end plate's front): 187 px. Its height across the bore, from the ring's top to the face's bottom (.ring_r and .body_bottom_below_axis, the other two photos: 2.158 in), is 270 px square to the bore (the rifle leans 6.7 degrees in the picture): 125 px/in against the length's 126.8, 1.3% apart. Read by the dark bore in its end, 40 px across
The right face's QD socket: its centre below the bore's axis1.2 in ± 0.04 in 30.5 mmProvisionalPhoto: Sylvan Arms' DSC08599: a rifle standing muzzle up, its right side toward the lens, close; 2048 x 2048
Photo 1.2 in ± 0.04 in used
Sylvan Arms' DSC08599: a rifle standing muzzle up, its right side toward the lens, close; 2048 x 2048, harvested
Scale: the length the maker says it adds (.added_length), read along the bore on the right face from the lower's rear face (the castle nut's front) to the stock half's rear face (the end plate's front): 187 px. Its height across the bore, from the ring's top to the face's bottom (.ring_r and .body_bottom_below_axis, the other two photos: 2.158 in), is 270 px square to the bore (the rifle leans 6.7 degrees in the picture): 125 px/in against the length's 126.8, 1.3% apart. Read by column 1018: 1.94 under the body's top, less .ring_r
The right face's QD socket: its centre behind the receiver half's front face0.45 in ± 0.03 in 11.4 mmProvisionalPhoto: Sylvan Arms' DSC08599: a rifle standing muzzle up, its right side toward the lens, close; 2048 x 2048
Photo 0.45 in ± 0.03 in used
Sylvan Arms' DSC08599: a rifle standing muzzle up, its right side toward the lens, close; 2048 x 2048, harvested
Scale: the length the maker says it adds (.added_length), read along the bore on the right face from the lower's rear face (the castle nut's front) to the stock half's rear face (the end plate's front): 187 px. Its height across the bore, from the ring's top to the face's bottom (.ring_r and .body_bottom_below_axis, the other two photos: 2.158 in), is 270 px square to the bore (the rifle leans 6.7 degrees in the picture): 125 px/in against the length's 126.8, 1.3% apart. Read by row 862 against the front face's 805
How far the QD socket's boss stands out of the right face0.2 in ± 0.08 in 5.1 mmProvisionalWorked out: An assumption for the drawing, not a reading: the photos see the boss end on (535513d34cb2) or obliquely (1191d2a72083, e6285ca2177b), where it stands out about half its diameter.
Worked out 0.2 in ± 0.08 in used
An assumption for the drawing, not a reading: the photos see the boss end on (535513d34cb2) or obliquely (1191d2a72083, e6285ca2177b), where it stands out about half its diameter., harvested
The QD sockets' bore depth0.3 in ± 0.1 in 7.6 mmProvisionalWorked out: An assumption for the drawing, not a reading: dark on every photo.
Worked out 0.3 in ± 0.1 in used
An assumption for the drawing, not a reading: dark on every photo., harvested
The bolt extension: the end that goes into the carrier (its O-ring end), to its shoulder0.512 in ± 0.03 in 13 mmProvisionalPhoto: Monadnock Firearms' picture for SA5P-R, the distributor's IQSA5PR-1, which is the same photograph as its IQSA5PL-1 for the left one: a LEFT folder, closed, from behind and right, with the bolt extension standing beside it; 1000 x 1000
Photo 0.512 in ± 0.03 in used
Monadnock Firearms' picture for SA5P-R, the distributor's IQSA5PR-1, which is the same photograph as its IQSA5PL-1 for the left one: a LEFT folder, closed, from behind and right, with the bolt extension standing beside it; 1000 x 1000, harvested
Scale: the extension's length behind its shoulder (290.1 px along it) as .added_length: 196.7 px/in. Read by its top face's centre (row 282) to the shoulder's (380), 98 px
The extension ("Includes a 1045 Steel Bolt Extension") stands upright beside the adapter on the distributor's photo, seen a little from above (its top face an ellipse 0.23 of its width: 13.5 degrees; lengths read along it are taken over cos 13.5). Scaled so that what stands behind its shoulder (the body and the neck) is the length the adapter adds, as it must be to put the buffer where it would rest without the adapter: at that scale its O-ring end is 0.610 across, under the carrier's 5/8 in bore (the maker: "9mm bolt carriers with standard sizing, 5/8 ID (.625) can use the included bolt extension"). The adapter's rear face's bore in the same photo, nearer the lens, gives a scale 14% larger.
The bolt extension: its O-ring end's diameter0.61 in ± 0.03 in 15.5 mmProvisionalPhoto: Monadnock Firearms' picture for SA5P-R, the distributor's IQSA5PR-1, which is the same photograph as its IQSA5PL-1 for the left one: a LEFT folder, closed, from behind and right, with the bolt extension standing beside it; 1000 x 1000
Photo 0.61 in ± 0.03 in used
Monadnock Firearms' picture for SA5P-R, the distributor's IQSA5PR-1, which is the same photograph as its IQSA5PL-1 for the left one: a LEFT folder, closed, from behind and right, with the bolt extension standing beside it; 1000 x 1000, harvested
Scale: 196.7 px/in (.ext_pilot_length's note). Read by 120 px across; the O-rings in its three grooves stand flush with it
The bolt extension: its body, shoulder to its rear step0.743 in ± 0.03 in 18.9 mmProvisionalPhoto: Monadnock Firearms' picture for SA5P-R, the distributor's IQSA5PR-1, which is the same photograph as its IQSA5PL-1 for the left one: a LEFT folder, closed, from behind and right, with the bolt extension standing beside it; 1000 x 1000
Photo 0.743 in ± 0.03 in used
Monadnock Firearms' picture for SA5P-R, the distributor's IQSA5PR-1, which is the same photograph as its IQSA5PL-1 for the left one: a LEFT folder, closed, from behind and right, with the bolt extension standing beside it; 1000 x 1000, harvested
Scale: 196.7 px/in (.ext_pilot_length's note). Read by rows 380 to 522, 142 px along
The bolt extension: its body's diameter0.737 in ± 0.03 in 18.7 mmProvisionalPhoto: Monadnock Firearms' picture for SA5P-R, the distributor's IQSA5PR-1, which is the same photograph as its IQSA5PL-1 for the left one: a LEFT folder, closed, from behind and right, with the bolt extension standing beside it; 1000 x 1000
Photo 0.737 in ± 0.03 in used
Monadnock Firearms' picture for SA5P-R, the distributor's IQSA5PR-1, which is the same photograph as its IQSA5PL-1 for the left one: a LEFT folder, closed, from behind and right, with the bolt extension standing beside it; 1000 x 1000, harvested
Scale: 196.7 px/in (.ext_pilot_length's note). Read by 145 px across
The bolt extension: its body's first groove's centre behind the shoulder0.105 in ± 0.02 in 2.7 mmProvisionalPhoto: Monadnock Firearms' picture for SA5P-R, the distributor's IQSA5PR-1, which is the same photograph as its IQSA5PL-1 for the left one: a LEFT folder, closed, from behind and right, with the bolt extension standing beside it; 1000 x 1000
Photo 0.105 in ± 0.02 in used
Monadnock Firearms' picture for SA5P-R, the distributor's IQSA5PR-1, which is the same photograph as its IQSA5PL-1 for the left one: a LEFT folder, closed, from behind and right, with the bolt extension standing beside it; 1000 x 1000, harvested
Scale: 196.7 px/in (.ext_pilot_length's note). Read by row 400 (the silhouette narrows to 135 px)
The bolt extension: its body's second groove's centre behind the shoulder0.314 in ± 0.02 in 8 mmProvisionalPhoto: Monadnock Firearms' picture for SA5P-R, the distributor's IQSA5PR-1, which is the same photograph as its IQSA5PL-1 for the left one: a LEFT folder, closed, from behind and right, with the bolt extension standing beside it; 1000 x 1000
Photo 0.314 in ± 0.02 in used
Monadnock Firearms' picture for SA5P-R, the distributor's IQSA5PR-1, which is the same photograph as its IQSA5PL-1 for the left one: a LEFT folder, closed, from behind and right, with the bolt extension standing beside it; 1000 x 1000, harvested
Scale: 196.7 px/in (.ext_pilot_length's note). Read by row 440
The bolt extension: its body's grooves' width0.045 in ± 0.015 in 1.1 mmProvisionalPhoto: Monadnock Firearms' picture for SA5P-R, the distributor's IQSA5PR-1, which is the same photograph as its IQSA5PL-1 for the left one: a LEFT folder, closed, from behind and right, with the bolt extension standing beside it; 1000 x 1000
Photo 0.045 in ± 0.015 in used
Monadnock Firearms' picture for SA5P-R, the distributor's IQSA5PR-1, which is the same photograph as its IQSA5PL-1 for the left one: a LEFT folder, closed, from behind and right, with the bolt extension standing beside it; 1000 x 1000, harvested
Scale: 196.7 px/in (.ext_pilot_length's note). Read by the rows where the silhouette is under 140 px: 8 to 10
The bolt extension: its body's grooves' depth0.025 in ± 0.01 in 0.6 mmProvisionalPhoto: Monadnock Firearms' picture for SA5P-R, the distributor's IQSA5PR-1, which is the same photograph as its IQSA5PL-1 for the left one: a LEFT folder, closed, from behind and right, with the bolt extension standing beside it; 1000 x 1000
Photo 0.025 in ± 0.01 in used
Monadnock Firearms' picture for SA5P-R, the distributor's IQSA5PR-1, which is the same photograph as its IQSA5PL-1 for the left one: a LEFT folder, closed, from behind and right, with the bolt extension standing beside it; 1000 x 1000, harvested
Scale: 196.7 px/in (.ext_pilot_length's note). Read by (145 - 135) / 2 px
The bolt extension: its neck's diameter0.488 in ± 0.03 in 12.4 mmProvisionalPhoto: Monadnock Firearms' picture for SA5P-R, the distributor's IQSA5PR-1, which is the same photograph as its IQSA5PL-1 for the left one: a LEFT folder, closed, from behind and right, with the bolt extension standing beside it; 1000 x 1000
Photo 0.488 in ± 0.03 in used
Monadnock Firearms' picture for SA5P-R, the distributor's IQSA5PR-1, which is the same photograph as its IQSA5PL-1 for the left one: a LEFT folder, closed, from behind and right, with the bolt extension standing beside it; 1000 x 1000, harvested
Scale: 196.7 px/in (.ext_pilot_length's note). Read by 95 to 97 px across, rows 536 to 600
The bolt extension: its neck, the body's rear step to where it flares0.513 in ± 0.03 in 13 mmProvisionalPhoto: Monadnock Firearms' picture for SA5P-R, the distributor's IQSA5PR-1, which is the same photograph as its IQSA5PL-1 for the left one: a LEFT folder, closed, from behind and right, with the bolt extension standing beside it; 1000 x 1000
Photo 0.513 in ± 0.03 in used
Monadnock Firearms' picture for SA5P-R, the distributor's IQSA5PR-1, which is the same photograph as its IQSA5PL-1 for the left one: a LEFT folder, closed, from behind and right, with the bolt extension standing beside it; 1000 x 1000, harvested
Scale: 196.7 px/in (.ext_pilot_length's note). Read by rows 522 to 620
The bolt extension: its flare, neck to foot0.157 in ± 0.03 in 4 mmProvisionalPhoto: Monadnock Firearms' picture for SA5P-R, the distributor's IQSA5PR-1, which is the same photograph as its IQSA5PL-1 for the left one: a LEFT folder, closed, from behind and right, with the bolt extension standing beside it; 1000 x 1000
Photo 0.157 in ± 0.03 in used
Monadnock Firearms' picture for SA5P-R, the distributor's IQSA5PR-1, which is the same photograph as its IQSA5PL-1 for the left one: a LEFT folder, closed, from behind and right, with the bolt extension standing beside it; 1000 x 1000, harvested
Scale: 196.7 px/in (.ext_pilot_length's note). Read by rows 620 to 650
The bolt extension: its foot's diameter (the end the buffer bears on)0.61 in ± 0.03 in 15.5 mmProvisionalPhoto: Monadnock Firearms' picture for SA5P-R, the distributor's IQSA5PR-1, which is the same photograph as its IQSA5PL-1 for the left one: a LEFT folder, closed, from behind and right, with the bolt extension standing beside it; 1000 x 1000
Photo 0.61 in ± 0.03 in used
Monadnock Firearms' picture for SA5P-R, the distributor's IQSA5PR-1, which is the same photograph as its IQSA5PL-1 for the left one: a LEFT folder, closed, from behind and right, with the bolt extension standing beside it; 1000 x 1000, harvested
Scale: 196.7 px/in (.ext_pilot_length's note). Read by 120 px across at rows 650 to 660
The bolt extension's weight, worked out2.82 oz ± 0.3 ozProvisionalWorked out: {std.density.steel} * 0.785398 * ({.ext_pilot_d} * {.ext_pilot_d} * {.ext_pilot_length} + {.ext_body_d} * {.ext_body_d} * {.ext_body_length} + {.ext_neck_d} * {.ext_neck_d} * {.ext_neck_length} + ({.ext_neck_d} * {.ext_neck_d} + {.ext_neck_d} * {.ext_foot_d} + {.ext_foot_d} * {.ext_foot_d}) * {.ext_flare_length} / 3 + {.ext_foot_d} * {.ext_foot_d} * {.ext_foot_length})
Worked out 2.82 oz ± 0.3 oz used
{std.density.steel} * 0.785398 * ({.ext_pilot_d} * {.ext_pilot_d} * {.ext_pilot_length} + {.ext_body_d} * {.ext_body_d} * {.ext_body_length} + {.ext_neck_d} * {.ext_neck_d} * {.ext_neck_length} + ({.ext_neck_d} * {.ext_neck_d} + {.ext_neck_d} * {.ext_foot_d} + {.ext_foot_d} * {.ext_foot_d}) * {.ext_flare_length} / 3 + {.ext_foot_d} * {.ext_foot_d} * {.ext_foot_length}), harvested
No page weighs it apart. Worked out: its turned steel ("1045 Steel", the maker) at the ledger's sizes, the pilot, body, neck and foot as cylinders and the flare as a cone's frustum, the two grooves left in; the model's volume holds to it.
The bolt extension: its foot, the flare to its end face0.062 in ± 0.03 in 1.6 mmProvisionalWorked out: {.added_length} - {.ext_body_length} - {.ext_neck_length} - {.ext_flare_length}
Worked out 0.062 in ± 0.03 in used
{.added_length} - {.ext_body_length} - {.ext_neck_length} - {.ext_flare_length}, harvested
What it goes with
By the way it mounts, and the figures each part on file states: a part whose figures say it doesn't fit is left out, and one whose fit can't be checked from what is published is marked. A check is against published figures, not a guarantee.
AR-15 receiver extension thread
- Lower receivers
- Aero Precision M4E1 complete lower, A2 grip and M4 stock, Aero Precision M4E1 Stripped Lower Receiver, Battle Arms Development Workhorse stripped lower, BCM MK2 AR-15 Lower Receiver, Bear Creek Arsenal BC-15 Multi Caliber, Lower Receiver, Black Anodized, Geissele Automatics Super Duty AR-15 Lower Receiver - Stripped Lower, Palmetto State Armory AR-15 "Stealth" Stripped Lower Receiver
- Folding stock adapters
- Law Tactical AR Folding Stock Adapter Gen 3-M, Law Tactical AR Folding Stock Adapter GEN-S, Sylvan Arms SA5 Pro AR15 Folding Stock Adapter (Opens To The Right)
AR-15 receiver extension thread
- Folding stock adapters
- Law Tactical AR Folding Stock Adapter Gen 3-M, Law Tactical AR Folding Stock Adapter GEN-S, Sylvan Arms SA5 Pro AR15 Folding Stock Adapter (Opens To The Right)
- Receiver extensions
- BCM Milspec Carbine Receiver Extension (Buffer Tube) 6 Position, BCM MK2 Receiver Extension, Geissele Automatics Premium Mil-Spec Buffer Tube, Guntec USA AR-15 Mil-Spec Buffer Tube (Gen 2), SB Tactical SBPDW receiver extension, housing and integral castle nut, VLTOR RE-A5 7-Position Receiver Extension, MilSpec Diameter
Prices on file
Each seller's latest reading of its own page: before tax and shipping, and not a quote. The pages are read again every night.
- Primary Arms $189.99 Nov 21, 2026, out of stock that day
- AR15Discounts $189.99 Nov 21, 2026, out of stock that day