Folding stock adapter
Law Tactical AR Folding Stock Adapter Gen 3-M
A hinge between the lower receiver and the buffer tube: press its button and the tube and stock swing to the rifle's left; unfolded they lock straight again. It moves the tube back 1.3 in, and a bolt carrier extension in the carrier's tail makes up the length. Sellers: "Made from CNC Machined 4140 Steel with DLC finish" (T.REX Arms); Law Tactical's sheet: "Always close stock (unfold) before firing. The AR is not designed to be fired from the folded position."

- Weight
- 10.5 oz ± 0.1 oz Corroboratedworked out: {.housing_weight} + {.extension_weight}
- Lowest price
- $259.00 at Midwest Gun Works, read Nov 21, 2026 (FDE), out of stock that day
- Maker's number
- 99312
- Colours
- Black, FDE
- Drawn as
- modelled
- Maker's page
- midwestgunworks.com
In “BCM 16 in on a Law folder”, a build on the start page, as it is.
Its figures
Every figure the site draws and checks it by, with where it came from. Open one for each source's reading, and why one is used where they differ.
Housing weight (the hinge assembly)8.5 oz ± 0.07 ozConfirmedWorked out: 7.4oz + 1.1oz
Published “Made from CNC Machined 4140 Steel with DLC finish Housing Weight: 8.5 oz. Bolt Carrier Extension: 2 oz.”
T.REX Arms, LAW Folder AR/M4 Gen 3 (its "What's Included": "1x LAW Tactical AR Folding Stock Adapter Gen3-M"), Specs, a seller, read Oct 18, 2026 the page, harvested Oct 18, 2026
Published “Housing Weight: 8.5 oz Bolt Carrier Extension: 2 oz Adds 1.3 inches to length of pull CNC Machined 4140 Steel”
RECOIL, Law Tactical Gen 3-M side folding AR stock (a news item listing the maker's figures), a review, read Oct 18, 2026 the page, harvested Oct 18, 2026
Worked out “GEN-S SPECIFICATIONS Housing Weight: 7.4 oz ... 1.1 oz. Lighter than GEN 3-M” used
7.4oz + 1.1oz, harvested
Law Tactical's page for the Gen-S (at the Gen 3-M's address): its housing and how much lighter it is than this one's. The maker's own word, worked out.
The maker's two figures for its successor, which say this one's; T.REX's list and RECOIL's item give the same 8.5 oz.
Bolt carrier extension weight2 oz ± 0.5 ozCorroboratedPublished: T.REX Arms, LAW Folder AR/M4 Gen 3 (its "What's Included": "1x LAW Tactical AR Folding Stock Adapter Gen3-M"), Specs, a seller, read Oct 18, 2026
Published “Bolt Carrier Extension: 2 oz.” used
T.REX Arms, LAW Folder AR/M4 Gen 3 (its "What's Included": "1x LAW Tactical AR Folding Stock Adapter Gen3-M"), Specs, a seller, read Oct 18, 2026 the page, harvested Oct 18, 2026
Published “Bolt Carrier Extension: 2 oz”
RECOIL, Law Tactical Gen 3-M side folding AR stock (a news item listing the maker's figures), a review, read Oct 18, 2026 the page, harvested Oct 18, 2026
A seller's list, and RECOIL's item gives the same; both quote the maker.
How far it moves the receiver extension back1.3 in ± 0.05 in 33 mmCorroboratedPublished: T.REX Arms, LAW Folder AR/M4 Gen 3 (its "What's Included": "1x LAW Tactical AR Folding Stock Adapter Gen3-M"), Specs, a seller, read Oct 18, 2026
Published “Adds 1.3 inches to length of pull” used
T.REX Arms, LAW Folder AR/M4 Gen 3 (its "What's Included": "1x LAW Tactical AR Folding Stock Adapter Gen3-M"), Specs, a seller, read Oct 18, 2026 the page, harvested Oct 18, 2026
Published “Adds 1.3 inches to length of pull”
RECOIL, Law Tactical Gen 3-M side folding AR stock (a news item listing the maker's figures), a review, read Oct 18, 2026 the page, harvested Oct 18, 2026
Published “When folded, it adds 1.25 inches to the back of the receiver”
T.REX Arms, LAW Folder AR/M4 Gen 3 (its "What's Included": "1x LAW Tactical AR Folding Stock Adapter Gen3-M"), Specs, a seller, read Oct 18, 2026 the page, harvested Oct 18, 2026
The length of pull is what the stock moves back by, which is this; RECOIL gives the same, and the maker's page says it of the Gen-S. T.REX's folded figure is another measure (what the folded rifle has behind its receiver) and is within the 1.3's last digit.
The tube screws into the stock half as into a lower, so the stock half's rear face is the receiver's rear face moved back by this. T.REX's second figure is kept beside it: read as what stands behind the receiver when the stock is folded, it would have the hinge far behind where the halves meet, which the photos of the part folded open (the two mating faces in one plane) and the patent's FIG. 6B (folded, about half the adapter behind the receiver) don't bear out. No side photo with a lower's pins in frame is on file to check either.
Its length along the bore (the housing, front face to rear face)1.3 in ± 0.05 in 33 mmCorroboratedWorked out: {.added_length}
Worked out 1.3 in ± 0.05 in used
{.added_length}, harvested
The receiver half's front face bears on the lower's rear face (std.ar15.receiver_rear_x) and the stock half's rear face stands where a lower's would: the housing is as long as it moves the tube back. The threaded flange reaches forward of it into the lower's ring.
The receiver half, front face to where the halves meet0.65 in ± 0.1 in 16.5 mmCorroboratedWorked out: {.hinge_x} + {std.ar15.receiver_rear_x}
Worked out 0.65 in ± 0.1 in used
{.hinge_x} + {std.ar15.receiver_rear_x}, harvested
Where the halves meet is in the hinge's plane (.hinge_x): folded open 180 degrees their two mating faces lie in one plane side by side (RECOIL's 55fec2c093b8 from behind, T.REX's d540fee687f5 from above), which a seam ahead of or behind the axis would offset by twice its distance. No square side view of the part is on file to read it on directly.
The stock half, where the halves meet to its rear face0.65 in ± 0.1 in 16.5 mmCorroboratedWorked out: {.length} - {.receiver_half_length}
Worked out 0.65 in ± 0.1 in used
{.length} - {.receiver_half_length}, harvested
The hinge's axis behind the takedown pin1.775 in ± 0.1 in 45.1 mmCorroboratedWorked out: 0in - {std.ar15.receiver_rear_x} + {.length} / 2
Worked out 1.775 in ± 0.1 in used
0in - {std.ar15.receiver_rear_x} + {.length} / 2, harvested
Half the housing's length behind the lower's rear face (the Army's drawing): on T.REX's photo from above (d540fee687f5) the part lies folded open 180 degrees with each half flat on its outer face (the receiver half's front, the stock half's rear: both bores read as circles to 2 px, so neither is propped) and the hinge's axis level between them, which puts the axis as far from the one outer face as from the other. The two halves' outlines' top arcs read alike (315.1 and 315.3 px across), so their mating faces stand at one height too: the halves are of a length. The patent's FIG. 6A (an earlier embodiment, not held to scale) draws the knuckles three quarters of the way back.
The hinge's axis out from the tube's axis, toward the side it folds to (the rifle's left)1.137 in ± 0.035 in 28.9 mmProvisionalPhoto: T.REX Arms' gallery, LAW-Folder-M4-AR-Gen-3-TAN-7939.jpg: the FDE adapter folded open 180 degrees on a slate table, both mating faces up, from straight above; 3000 x 3000
Photo 1.137 in ± 0.035 in used
T.REX Arms' gallery, LAW-Folder-M4-AR-Gen-3-TAN-7939.jpg: the FDE adapter folded open 180 degrees on a slate table, both mating faces up, from straight above; 3000 x 3000, harvested
Scale: the stock half's threaded bore seen through to the table: a RANSAC circle on the hole's rim, centre (1092.2, 1399.8), 400.0 px across, as .bore_thread_crest_d (347.4 px/in); the receiver half's bore, centre (1882.3, 1399.8), on the same row: the photo isn't rolled. Read by half the bores' centres' distance, 790.1 px / 2 = 395.0 px. The hinge's own column (its knuckles' outer edges and the knurled nut under them, rows 1421 to 1925) is centred on 1480 ± 6, 7 px short of midway. ± covers the scale's (the thread's crest diameter, 2.6%) and those 7 px
Folded open 180 degrees about the hinge, the two halves' bores stand side by side twice this apart, with the hinge midway: read on T.REX's photo of that pose, scaled by the stock half's threaded bore in the same plane (a second reading, on Law Tactical's gallery photo 3b8c6c1cb2e2, was taken out: that photo is the GEN-S, Primary Arms' picture of it cropped; no other photo of this part square to that pose is on file). The side is the left: in T.REX's photo and RECOIL's of that pose the halves' mating faces are toward the lens (as they face rearward when folded), the receiver half (its latch and "CLOSE BEFORE FIRING") is on the right and the stock half on the left; the instruction sheet's steps 4 to 6 draw the folded stock half on the near side of a lower shown from its left (muzzle to the left); the patent's FIG. 6B draws the folded stock in front of the receiver in a view of the left side; and RECOIL's picture of a rifle folded (484aef9fa092) has the stock across the left side.
How far the hinge turns before its own halves stop it180° ± 5°ProvisionalPhoto: T.REX Arms' gallery, LAW-Folder-M4-AR-Gen-3-TAN-7939.jpg: the FDE adapter folded open 180 degrees on a slate table, both mating faces up, from straight above; 3000 x 3000
Photo 180 deg ± 5 deg used
T.REX Arms' gallery, LAW-Folder-M4-AR-Gen-3-TAN-7939.jpg: the FDE adapter folded open 180 degrees on a slate table, both mating faces up, from straight above; 3000 x 3000, harvested
Scale: angles: both bores read as circles (RANSAC fits, rms 2 px) on one row, the faces square to the lens. Read by the two halves' faces in one plane, side by side; read with US 8,769,855: "the stock can be folded flat against the receiver when the folding stock adapter is in an open position" (col. 3, l. 51 to 53)
Folded open on a table (T.REX, RECOIL) the halves lie side by side with their mating faces in one plane, and between the rings below them the two halves' lugs meet across the hinge: the patent says the stock "can be folded flat against the receiver". No page states an angle, and no photo shows it turned past that; how far the stock itself goes on a rifle before it meets the receiver is the build's (the app works it out).
The stock half's threaded bore: its thread's crests (what one sees through it)1.151 in ± 0.029 in 29.2 mmConfirmedWorked out: ({std.receiver_extension.thread_major_d} / 1.0529 + {std.receiver_extension.thread_major_d}) / 2
Worked out 1.1515 in ± 0.0295 in used
({std.receiver_extension.thread_major_d} / 1.0529 + {std.receiver_extension.thread_major_d}) / 2, harvested
The middle of 1.122 (the flange's major diameter over the two bores' ratio, 421.2 / 400.0 px: the receiver half's bore has to pass it) and 1.1813 (the extension's major diameter, which a hole's crests are under); ± half that span.
The scale of every photo here. The receiver extension screws in as into a lower (the sheet: "in the same manner it would be installed onto the rear of the rifle receiver"), so this is a 1 3/16-16 thread in a hole: its crests lie between the extension's own minor and major diameters (the Army's limits). The receiver half's bore, read beside it in the same photo at 1.053 times this, has to pass the threaded flange (std major 1.1813): that puts this at 1.122 or more.
The receiver half's bore (where the flange passes, at its narrowest)1.213 in ± 0.032 in 30.8 mmProvisionalPhoto: T.REX Arms' gallery, LAW-Folder-M4-AR-Gen-3-TAN-7939.jpg: the FDE adapter folded open 180 degrees on a slate table, both mating faces up, from straight above; 3000 x 3000
Photo 1.213 in ± 0.032 in used
T.REX Arms' gallery, LAW-Folder-M4-AR-Gen-3-TAN-7939.jpg: the FDE adapter folded open 180 degrees on a slate table, both mating faces up, from straight above; 3000 x 3000, harvested
Scale: the stock half's threaded bore seen through to the table: a RANSAC circle on the hole's rim, centre (1092.2, 1399.8), 400.0 px across, as .bore_thread_crest_d (347.4 px/in); the receiver half's bore, centre (1882.3, 1399.8), on the same row: the photo isn't rolled. Read by a RANSAC circle on the hole's rim, 421.2 px across (the black latch inside it masked by the fit's tolerance)
A second reading on Law Tactical's gallery photo 3b8c6c1cb2e2 was taken out (2026-10-18): that photo is the GEN-S, not this part.
The rings' tops above the tube's axis0.734 in ± 0.02 in 18.6 mmProvisionalPhoto: T.REX Arms' gallery, LAW-Folder-M4-AR-Gen-3-TAN-7939.jpg: the FDE adapter folded open 180 degrees on a slate table, both mating faces up, from straight above; 3000 x 3000
Photo 0.734 in ± 0.02 in used
T.REX Arms' gallery, LAW-Folder-M4-AR-Gen-3-TAN-7939.jpg: the FDE adapter folded open 180 degrees on a slate table, both mating faces up, from straight above; 3000 x 3000, harvested
Scale: the stock half's threaded bore seen through to the table: a RANSAC circle on the hole's rim, centre (1092.2, 1399.8), 400.0 px across, as .bore_thread_crest_d (347.4 px/in); the receiver half's bore, centre (1882.3, 1399.8), on the same row: the photo isn't rolled. Read by the receiver half's outline's top, 255 px above its bore's centre (the stock half's 0.713: its ring is a little lower)
Its feet below the tube's axis1.532 in ± 0.03 in 38.9 mmProvisionalPhoto: T.REX Arms' gallery, LAW-Folder-M4-AR-Gen-3-TAN-7939.jpg: the FDE adapter folded open 180 degrees on a slate table, both mating faces up, from straight above; 3000 x 3000
Photo 1.532 in ± 0.03 in used
T.REX Arms' gallery, LAW-Folder-M4-AR-Gen-3-TAN-7939.jpg: the FDE adapter folded open 180 degrees on a slate table, both mating faces up, from straight above; 3000 x 3000, harvested
Scale: the stock half's threaded bore seen through to the table: a RANSAC circle on the hole's rim, centre (1092.2, 1399.8), 400.0 px across, as .bore_thread_crest_d (347.4 px/in); the receiver half's bore, centre (1882.3, 1399.8), on the same row: the photo isn't rolled. Read by both halves' outlines' lowest rows, 532 px below the bores' centres
Its height2.266 in ± 0.04 in 57.6 mmProvisionalWorked out: {.body_top_above_axis} + {.body_bottom_below_axis}
Worked out 2.266 in ± 0.04 in used
{.body_top_above_axis} + {.body_bottom_below_axis}, harvested
Its side away from the hinge (the rifle's right), out from the tube's axis0.79 in ± 0.02 in 20.1 mmProvisionalPhoto: T.REX Arms' gallery, LAW-Folder-M4-AR-Gen-3-TAN-7939.jpg: the FDE adapter folded open 180 degrees on a slate table, both mating faces up, from straight above; 3000 x 3000
Photo 0.79 in ± 0.02 in used
T.REX Arms' gallery, LAW-Folder-M4-AR-Gen-3-TAN-7939.jpg: the FDE adapter folded open 180 degrees on a slate table, both mating faces up, from straight above; 3000 x 3000, harvested
Scale: the stock half's threaded bore seen through to the table: a RANSAC circle on the hole's rim, centre (1092.2, 1399.8), 400.0 px across, as .bore_thread_crest_d (347.4 px/in); the receiver half's bore, centre (1882.3, 1399.8), on the same row: the photo isn't rolled. Read by the receiver half's straight side, 274 px from its bore's centre (rows 1380 to 1770; the stock half's side reads 0.786 at its widest); the button's bar stands out past it
The hinge's two outer knuckles (the stock half's tabs), across0.481 in ± 0.02 in 12.2 mmProvisionalPhoto: T.REX Arms' gallery, LAW-Folder-M4-AR-Gen-3-TAN-7939.jpg: the FDE adapter folded open 180 degrees on a slate table, both mating faces up, from straight above; 3000 x 3000
Photo 0.481 in ± 0.02 in used
T.REX Arms' gallery, LAW-Folder-M4-AR-Gen-3-TAN-7939.jpg: the FDE adapter folded open 180 degrees on a slate table, both mating faces up, from straight above; 3000 x 3000, harvested
Scale: the stock half's threaded bore seen through to the table: a RANSAC circle on the hole's rim, centre (1092.2, 1399.8), 400.0 px across, as .bore_thread_crest_d (347.4 px/in); the receiver half's bore, centre (1882.3, 1399.8), on the same row: the photo isn't rolled. Read by the upper tab seen from the side, 167 px across (columns 1405 to 1572)
The hinge's middle knuckle (the receiver half's pivot block), across0.63 in ± 0.04 in 16 mmProvisionalPhoto: T.REX Arms' gallery, LAW-Folder-M4-AR-Gen-3-TAN-7939.jpg: the FDE adapter folded open 180 degrees on a slate table, both mating faces up, from straight above; 3000 x 3000
Photo 0.63 in ± 0.04 in used
T.REX Arms' gallery, LAW-Folder-M4-AR-Gen-3-TAN-7939.jpg: the FDE adapter folded open 180 degrees on a slate table, both mating faces up, from straight above; 3000 x 3000, harvested
Scale: the stock half's threaded bore seen through to the table: a RANSAC circle on the hole's rim, centre (1092.2, 1399.8), 400.0 px across, as .bore_thread_crest_d (347.4 px/in); the receiver half's bore, centre (1882.3, 1399.8), on the same row: the photo isn't rolled. Read by seen from the side, 219 px across (columns 1368 to 1588 on row 1660, its edge lines included)
The black washers between the knuckles, across0.527 in ± 0.02 in 13.4 mmProvisionalPhoto: T.REX Arms' gallery, LAW-Folder-M4-AR-Gen-3-TAN-7939.jpg: the FDE adapter folded open 180 degrees on a slate table, both mating faces up, from straight above; 3000 x 3000
Photo 0.527 in ± 0.02 in used
T.REX Arms' gallery, LAW-Folder-M4-AR-Gen-3-TAN-7939.jpg: the FDE adapter folded open 180 degrees on a slate table, both mating faces up, from straight above; 3000 x 3000, harvested
Scale: the stock half's threaded bore seen through to the table: a RANSAC circle on the hole's rim, centre (1092.2, 1399.8), 400.0 px across, as .bore_thread_crest_d (347.4 px/in); the receiver half's bore, centre (1882.3, 1399.8), on the same row: the photo isn't rolled. Read by 183 px (columns 1385 to 1568)
The upper tab's top, below the tube's axis0.061 in ± 0.01 in 1.5 mmProvisionalPhoto: T.REX Arms' gallery, LAW-Folder-M4-AR-Gen-3-TAN-7939.jpg: the FDE adapter folded open 180 degrees on a slate table, both mating faces up, from straight above; 3000 x 3000
Photo 0.061 in ± 0.01 in used
T.REX Arms' gallery, LAW-Folder-M4-AR-Gen-3-TAN-7939.jpg: the FDE adapter folded open 180 degrees on a slate table, both mating faces up, from straight above; 3000 x 3000, harvested
Scale: the stock half's threaded bore seen through to the table: a RANSAC circle on the hole's rim, centre (1092.2, 1399.8), 400.0 px across, as .bore_thread_crest_d (347.4 px/in); the receiver half's bore, centre (1882.3, 1399.8), on the same row: the photo isn't rolled. Read by along the hinge's column (1480): the tan of the tab begins at row 1421
The upper tab's bottom, below the tube's axis0.409 in ± 0.01 in 10.4 mmProvisionalPhoto: T.REX Arms' gallery, LAW-Folder-M4-AR-Gen-3-TAN-7939.jpg: the FDE adapter folded open 180 degrees on a slate table, both mating faces up, from straight above; 3000 x 3000
Photo 0.409 in ± 0.01 in used
T.REX Arms' gallery, LAW-Folder-M4-AR-Gen-3-TAN-7939.jpg: the FDE adapter folded open 180 degrees on a slate table, both mating faces up, from straight above; 3000 x 3000, harvested
Scale: the stock half's threaded bore seen through to the table: a RANSAC circle on the hole's rim, centre (1092.2, 1399.8), 400.0 px across, as .bore_thread_crest_d (347.4 px/in); the receiver half's bore, centre (1882.3, 1399.8), on the same row: the photo isn't rolled. Read by row 1542, where the black washer begins
The middle knuckle's top, below the tube's axis0.542 in ± 0.01 in 13.8 mmProvisionalPhoto: T.REX Arms' gallery, LAW-Folder-M4-AR-Gen-3-TAN-7939.jpg: the FDE adapter folded open 180 degrees on a slate table, both mating faces up, from straight above; 3000 x 3000
Photo 0.542 in ± 0.01 in used
T.REX Arms' gallery, LAW-Folder-M4-AR-Gen-3-TAN-7939.jpg: the FDE adapter folded open 180 degrees on a slate table, both mating faces up, from straight above; 3000 x 3000, harvested
Scale: the stock half's threaded bore seen through to the table: a RANSAC circle on the hole's rim, centre (1092.2, 1399.8), 400.0 px across, as .bore_thread_crest_d (347.4 px/in); the receiver half's bore, centre (1882.3, 1399.8), on the same row: the photo isn't rolled. Read by row 1589
The middle knuckle's bottom, below the tube's axis0.968 in ± 0.01 in 24.6 mmProvisionalPhoto: T.REX Arms' gallery, LAW-Folder-M4-AR-Gen-3-TAN-7939.jpg: the FDE adapter folded open 180 degrees on a slate table, both mating faces up, from straight above; 3000 x 3000
Photo 0.968 in ± 0.01 in used
T.REX Arms' gallery, LAW-Folder-M4-AR-Gen-3-TAN-7939.jpg: the FDE adapter folded open 180 degrees on a slate table, both mating faces up, from straight above; 3000 x 3000, harvested
Scale: the stock half's threaded bore seen through to the table: a RANSAC circle on the hole's rim, centre (1092.2, 1399.8), 400.0 px across, as .bore_thread_crest_d (347.4 px/in); the receiver half's bore, centre (1882.3, 1399.8), on the same row: the photo isn't rolled. Read by row 1737
The lower tab's top, below the tube's axis1.1 in ± 0.01 in 27.9 mmProvisionalPhoto: T.REX Arms' gallery, LAW-Folder-M4-AR-Gen-3-TAN-7939.jpg: the FDE adapter folded open 180 degrees on a slate table, both mating faces up, from straight above; 3000 x 3000
Photo 1.1 in ± 0.01 in used
T.REX Arms' gallery, LAW-Folder-M4-AR-Gen-3-TAN-7939.jpg: the FDE adapter folded open 180 degrees on a slate table, both mating faces up, from straight above; 3000 x 3000, harvested
Scale: the stock half's threaded bore seen through to the table: a RANSAC circle on the hole's rim, centre (1092.2, 1399.8), 400.0 px across, as .bore_thread_crest_d (347.4 px/in); the receiver half's bore, centre (1882.3, 1399.8), on the same row: the photo isn't rolled. Read by row 1783
The lower tab's bottom, below the tube's axis1.284 in ± 0.01 in 32.6 mmProvisionalPhoto: T.REX Arms' gallery, LAW-Folder-M4-AR-Gen-3-TAN-7939.jpg: the FDE adapter folded open 180 degrees on a slate table, both mating faces up, from straight above; 3000 x 3000
Photo 1.284 in ± 0.01 in used
T.REX Arms' gallery, LAW-Folder-M4-AR-Gen-3-TAN-7939.jpg: the FDE adapter folded open 180 degrees on a slate table, both mating faces up, from straight above; 3000 x 3000, harvested
Scale: the stock half's threaded bore seen through to the table: a RANSAC circle on the hole's rim, centre (1092.2, 1399.8), 400.0 px across, as .bore_thread_crest_d (347.4 px/in); the receiver half's bore, centre (1882.3, 1399.8), on the same row: the photo isn't rolled. Read by row 1848, where the knurled nut begins
The hinge bolt's knurled nut, across0.36 in ± 0.02 in 9.1 mmProvisionalPhoto: T.REX Arms' gallery, LAW-Folder-M4-AR-Gen-3-TAN-7939.jpg: the FDE adapter folded open 180 degrees on a slate table, both mating faces up, from straight above; 3000 x 3000
Photo 0.36 in ± 0.02 in used
T.REX Arms' gallery, LAW-Folder-M4-AR-Gen-3-TAN-7939.jpg: the FDE adapter folded open 180 degrees on a slate table, both mating faces up, from straight above; 3000 x 3000, harvested
Scale: the stock half's threaded bore seen through to the table: a RANSAC circle on the hole's rim, centre (1092.2, 1399.8), 400.0 px across, as .bore_thread_crest_d (347.4 px/in); the receiver half's bore, centre (1882.3, 1399.8), on the same row: the photo isn't rolled. Read by 125 px (columns 1418 to 1543)
The knurled nut's end, below the tube's axis1.511 in ± 0.02 in 38.4 mmProvisionalPhoto: T.REX Arms' gallery, LAW-Folder-M4-AR-Gen-3-TAN-7939.jpg: the FDE adapter folded open 180 degrees on a slate table, both mating faces up, from straight above; 3000 x 3000
Photo 1.511 in ± 0.02 in used
T.REX Arms' gallery, LAW-Folder-M4-AR-Gen-3-TAN-7939.jpg: the FDE adapter folded open 180 degrees on a slate table, both mating faces up, from straight above; 3000 x 3000, harvested
Scale: the stock half's threaded bore seen through to the table: a RANSAC circle on the hole's rim, centre (1092.2, 1399.8), 400.0 px across, as .bore_thread_crest_d (347.4 px/in); the receiver half's bore, centre (1882.3, 1399.8), on the same row: the photo isn't rolled. Read by row 1925, the knurl's end
Its width across the rifle, the hinge included (the button's bar not)2.256 in ± 0.05 in 57.3 mmProvisionalWorked out: {.far_side} + {.hinge_z} + {.pivot_d} / 2
Worked out 2.2565 in ± 0.05 in used
{.far_side} + {.hinge_z} + {.pivot_d} / 2, harvested
The stock half's rear face: its two small holes, across0.22 in ± 0.03 in 5.6 mmProvisionalPhoto: Blackstone's photo of the black adapter closed, from behind, the left and above; 700 px
Photo 0.22 in ± 0.03 in used
Blackstone's photo of the black adapter closed, from behind, the left and above; 700 px, harvested
Scale: the threaded bore's width across the face, 285 px as .bore_thread_crest_d (the face is turned about a level axis: its widths are square, its heights foreshortened). Read by 55 px across each hole
The two small holes, each out from the middle0.33 in ± 0.04 in 8.4 mmProvisionalPhoto: Blackstone, closed, from behind and above; 700 px
Photo 0.33 in ± 0.04 in used
Blackstone, closed, from behind and above; 700 px, harvested
Scale: the threaded bore's width, 285 px. Read by centres 90 and 75 px either side of the bore's middle (columns 210 and 375 against 300), the mean
The two small holes' centres below the tube's axis0.69 in ± 0.06 in 17.5 mmProvisionalPhoto: Blackstone, closed, from behind and above; 700 px
Photo 0.69 in ± 0.06 in used
Blackstone, closed, from behind and above; 700 px, harvested
Scale: the face's own height from the bore's centre (row 310) to its feet (row 650) as .body_bottom_below_axis: the face is foreshortened up and down. Read by rows 455 and 470: 0.43 and 0.47 of the way down
The stock half's rear face: its large hole (where an A2 stock's tab would go), across0.44 in ± 0.04 in 11.2 mmProvisionalPhoto: Blackstone, closed, from behind and above; 700 px
Photo 0.44 in ± 0.04 in used
Blackstone, closed, from behind and above; 700 px, harvested
Scale: the threaded bore's width, 285 px. Read by 110 px across (columns 235 to 345), centred under the bore
The large hole's centre below the tube's axis1.13 in ± 0.08 in 28.7 mmProvisionalPhoto: Blackstone, closed, from behind and above; 700 px
Photo 1.13 in ± 0.08 in used
Blackstone, closed, from behind and above; 700 px, harvested
Scale: the face's height from the bore's centre to its feet as .body_bottom_below_axis. Read by row 560: 0.735 of the way down
How deep the rear face's three holes go0.4 in ± 0.15 in 10.2 mmProvisionalWorked out: An assumption for the drawing, not a reading: the holes are dark to their floors in every photo of the rear face, and the stock half's front face has none (they are blind). Taken a little over half the half's length.
Worked out 0.4 in ± 0.15 in used
An assumption for the drawing, not a reading: the holes are dark to their floors in every photo of the rear face, and the stock half's front face has none (they are blind). Taken a little over half the half's length., harvested
The stock half's locking tab, across (on its front face, low on the side away from the hinge)0.22 in ± 0.02 in 5.6 mmProvisionalPhoto: T.REX Arms' gallery, LAW-Folder-M4-AR-Gen-3-TAN-7939.jpg: the FDE adapter folded open 180 degrees on a slate table, both mating faces up, from straight above; 3000 x 3000
Photo 0.22 in ± 0.02 in used
T.REX Arms' gallery, LAW-Folder-M4-AR-Gen-3-TAN-7939.jpg: the FDE adapter folded open 180 degrees on a slate table, both mating faces up, from straight above; 3000 x 3000, harvested
Scale: the stock half's threaded bore seen through to the table: a RANSAC circle on the hole's rim, centre (1092.2, 1399.8), 400.0 px across, as .bore_thread_crest_d (347.4 px/in); the receiver half's bore, centre (1882.3, 1399.8), on the same row: the photo isn't rolled. Read by the raised rounded pad on the stock half's face, columns 940 to 1017 (77 px)
The locking tab, up and down0.4 in ± 0.03 in 10.2 mmProvisionalPhoto: T.REX Arms' gallery, LAW-Folder-M4-AR-Gen-3-TAN-7939.jpg: the FDE adapter folded open 180 degrees on a slate table, both mating faces up, from straight above; 3000 x 3000
Photo 0.4 in ± 0.03 in used
T.REX Arms' gallery, LAW-Folder-M4-AR-Gen-3-TAN-7939.jpg: the FDE adapter folded open 180 degrees on a slate table, both mating faces up, from straight above; 3000 x 3000, harvested
Scale: the stock half's threaded bore seen through to the table: a RANSAC circle on the hole's rim, centre (1092.2, 1399.8), 400.0 px across, as .bore_thread_crest_d (347.4 px/in); the receiver half's bore, centre (1882.3, 1399.8), on the same row: the photo isn't rolled. Read by rows 1638 to 1778 (140 px)
The locking tab's middle, out from the tube's axis toward the side away from the hinge0.327 in ± 0.02 in 8.3 mmProvisionalPhoto: T.REX Arms' gallery, LAW-Folder-M4-AR-Gen-3-TAN-7939.jpg: the FDE adapter folded open 180 degrees on a slate table, both mating faces up, from straight above; 3000 x 3000
Photo 0.327 in ± 0.02 in used
T.REX Arms' gallery, LAW-Folder-M4-AR-Gen-3-TAN-7939.jpg: the FDE adapter folded open 180 degrees on a slate table, both mating faces up, from straight above; 3000 x 3000, harvested
Scale: the stock half's threaded bore seen through to the table: a RANSAC circle on the hole's rim, centre (1092.2, 1399.8), 400.0 px across, as .bore_thread_crest_d (347.4 px/in); the receiver half's bore, centre (1882.3, 1399.8), on the same row: the photo isn't rolled. Read by column 978.5, 113.7 px from the stock half's bore centre
The locking tab's middle below the tube's axis0.887 in ± 0.02 in 22.5 mmProvisionalPhoto: T.REX Arms' gallery, LAW-Folder-M4-AR-Gen-3-TAN-7939.jpg: the FDE adapter folded open 180 degrees on a slate table, both mating faces up, from straight above; 3000 x 3000
Photo 0.887 in ± 0.02 in used
T.REX Arms' gallery, LAW-Folder-M4-AR-Gen-3-TAN-7939.jpg: the FDE adapter folded open 180 degrees on a slate table, both mating faces up, from straight above; 3000 x 3000, harvested
Scale: the stock half's threaded bore seen through to the table: a RANSAC circle on the hole's rim, centre (1092.2, 1399.8), 400.0 px across, as .bore_thread_crest_d (347.4 px/in); the receiver half's bore, centre (1882.3, 1399.8), on the same row: the photo isn't rolled. Read by row 1708
How far the locking tab stands forward of the stock half's face0.15 in ± 0.05 in 3.8 mmProvisionalWorked out: An assumption for the drawing, not a reading: no view on file shows the tab in profile. The patent's tab 135 goes into the receiver half's indentation 120, where the button's retainer catches it.
Worked out 0.15 in ± 0.05 in used
An assumption for the drawing, not a reading: no view on file shows the tab in profile. The patent's tab 135 goes into the receiver half's indentation 120, where the button's retainer catches it., harvested
The receiver half's window for the locking tab and the button's retainer, across0.36 in ± 0.03 in 9.1 mmProvisionalPhoto: T.REX Arms' gallery, LAW-Folder-M4-AR-Gen-3-TAN-7939.jpg: the FDE adapter folded open 180 degrees on a slate table, both mating faces up, from straight above; 3000 x 3000
Photo 0.36 in ± 0.03 in used
T.REX Arms' gallery, LAW-Folder-M4-AR-Gen-3-TAN-7939.jpg: the FDE adapter folded open 180 degrees on a slate table, both mating faces up, from straight above; 3000 x 3000, harvested
Scale: the stock half's threaded bore seen through to the table: a RANSAC circle on the hole's rim, centre (1092.2, 1399.8), 400.0 px across, as .bore_thread_crest_d (347.4 px/in); the receiver half's bore, centre (1882.3, 1399.8), on the same row: the photo isn't rolled. Read by the dark opening on the receiver half's face beside "CLOSE BEFORE FIRING", columns 1913 to 2038
The window, up and down0.45 in ± 0.03 in 11.4 mmProvisionalPhoto: T.REX Arms' gallery, LAW-Folder-M4-AR-Gen-3-TAN-7939.jpg: the FDE adapter folded open 180 degrees on a slate table, both mating faces up, from straight above; 3000 x 3000
Photo 0.45 in ± 0.03 in used
T.REX Arms' gallery, LAW-Folder-M4-AR-Gen-3-TAN-7939.jpg: the FDE adapter folded open 180 degrees on a slate table, both mating faces up, from straight above; 3000 x 3000, harvested
Scale: the stock half's threaded bore seen through to the table: a RANSAC circle on the hole's rim, centre (1092.2, 1399.8), 400.0 px across, as .bore_thread_crest_d (347.4 px/in); the receiver half's bore, centre (1882.3, 1399.8), on the same row: the photo isn't rolled. Read by rows 1669 to 1825
How deep the window goes into the receiver half0.3 in ± 0.1 in 7.6 mmProvisionalWorked out: An assumption for the drawing, not a reading: deep enough for the tab (.tab_proud) and the button's retainer behind it; no view shows its floor.
Worked out 0.3 in ± 0.1 in used
An assumption for the drawing, not a reading: deep enough for the tab (.tab_proud) and the button's retainer behind it; no view shows its floor., harvested
The button's bar out of the receiver half's side (the rifle's right), up and down0.29 in ± 0.03 in 7.4 mmProvisionalPhoto: T.REX Arms' gallery, LAW-Folder-M4-AR-Gen-3-TAN-7939.jpg: the FDE adapter folded open 180 degrees on a slate table, both mating faces up, from straight above; 3000 x 3000
Photo 0.29 in ± 0.03 in used
T.REX Arms' gallery, LAW-Folder-M4-AR-Gen-3-TAN-7939.jpg: the FDE adapter folded open 180 degrees on a slate table, both mating faces up, from straight above; 3000 x 3000, harvested
Scale: the stock half's threaded bore seen through to the table: a RANSAC circle on the hole's rim, centre (1092.2, 1399.8), 400.0 px across, as .bore_thread_crest_d (347.4 px/in); the receiver half's bore, centre (1882.3, 1399.8), on the same row: the photo isn't rolled. Read by the black bar standing out past the side, rows 1662 to 1763
How far the button's bar stands out of the side0.18 in ± 0.03 in 4.6 mmProvisionalPhoto: T.REX Arms' gallery, LAW-Folder-M4-AR-Gen-3-TAN-7939.jpg: the FDE adapter folded open 180 degrees on a slate table, both mating faces up, from straight above; 3000 x 3000
Photo 0.18 in ± 0.03 in used
T.REX Arms' gallery, LAW-Folder-M4-AR-Gen-3-TAN-7939.jpg: the FDE adapter folded open 180 degrees on a slate table, both mating faces up, from straight above; 3000 x 3000, harvested
Scale: the stock half's threaded bore seen through to the table: a RANSAC circle on the hole's rim, centre (1092.2, 1399.8), 400.0 px across, as .bore_thread_crest_d (347.4 px/in); the receiver half's bore, centre (1882.3, 1399.8), on the same row: the photo isn't rolled. Read by to column 2224, 63 px past the side's straight edge
The button's bar's middle below the tube's axis0.9 in ± 0.03 in 22.9 mmProvisionalPhoto: T.REX Arms' gallery, LAW-Folder-M4-AR-Gen-3-TAN-7939.jpg: the FDE adapter folded open 180 degrees on a slate table, both mating faces up, from straight above; 3000 x 3000
Photo 0.9 in ± 0.03 in used
T.REX Arms' gallery, LAW-Folder-M4-AR-Gen-3-TAN-7939.jpg: the FDE adapter folded open 180 degrees on a slate table, both mating faces up, from straight above; 3000 x 3000, harvested
Scale: the stock half's threaded bore seen through to the table: a RANSAC circle on the hole's rim, centre (1092.2, 1399.8), 400.0 px across, as .bore_thread_crest_d (347.4 px/in); the receiver half's bore, centre (1882.3, 1399.8), on the same row: the photo isn't rolled. Read by row 1712
The threaded flange's head, across (it sits in the receiver half)1.3 in ± 0.05 in 33 mmProvisionalWorked out: An assumption for the drawing, not a reading: the head bears on a lip inside the receiver half's bore (the patent: "a head 114, which can be configured to abut up against a raised lip 146 located within the dead hinge section opening 123"); a little over the lip, .receiver_bore_d. Hidden when the adapter is on a rifle.
Worked out 1.3 in ± 0.05 in used
An assumption for the drawing, not a reading: the head bears on a lip inside the receiver half's bore (the patent: "a head 114, which can be configured to abut up against a raised lip 146 located within the dead hinge section opening 123"); a little over the lip, .receiver_bore_d. Hidden when the adapter is on a rifle., harvested
The flange's head, along the bore0.12 in ± 0.04 in 3 mmProvisionalWorked out: An assumption for the drawing, not a reading: Midwest Gun Works' photos of this part's flange (af70d3e9c54e, 93ed44e08726) have its slotted head a fraction of the ring's length, each a picture with nothing in its plane to scale it by; it is hidden on a rifle.
Worked out 0.12 in ± 0.04 in used
An assumption for the drawing, not a reading: Midwest Gun Works' photos of this part's flange (af70d3e9c54e, 93ed44e08726) have its slotted head a fraction of the ring's length, each a picture with nothing in its plane to scale it by; it is hidden on a rifle., harvested
Bolt carrier extension: the end that goes into the carrier, across (its O-rings)0.599 in ± 0.02 in 15.2 mmCorroboratedPhoto: Midwest Gun Works, LTGEN3MFDE: the FDE Gen 3-M closed, its black bolt carrier extension standing on its head end beside it, seen from in front and 17 degrees above (its top end's rim an ellipse 0.30 of its width); 1500 px
Photo 0.599 in ± 0.02 in used
Midwest Gun Works, LTGEN3MFDE: the FDE Gen 3-M closed, its black bolt carrier extension standing on its head end beside it, seen from in front and 17 degrees above (its top end's rim an ellipse 0.30 of its width); 1500 px, harvested
Scale: its length from the first shoulder's plane (row 576) to its head end's plane (841), 265 px, as .added_length: what it fills between the carrier and the buffer (the patent: "This extension in length can compensate for the length added to the rifle by the addition of the folding stock adapter 100"): 203.8 px/in along it, and 213.6 px/in across (its lengths foreshortened by cos 17.4 degrees). Read by its silhouette's width row by row (luminance under 200), its axis fitted through the rows' middles (2.3 degrees off upright) and the widths taken square to it; a plane is the row where the silhouette reaches that section's full width; the pilot 128 px
Photo 0.613 in ± 0.02 in
Midwest Gun Works, 99312_Z: the black Gen 3-M closed, its bolt carrier extension standing on its head end beside it, seen from in front and 28 degrees above (its top end's rim an ellipse 0.47 of its width); 1500 px, harvested
Scale: its length from the first shoulder's plane (row 516) to its head end's plane (777), 261 px, as .added_length: 200.8 px/in along it, and 228.2 px/in across (cos 28.3 degrees). Read by as the FDE photo's (its axis 4.4 degrees off upright); the pilot 140 px
Nearer side-on (17 degrees above level against 28): its lengths, and so its scale, depend less on the elevation read off the top end's rim. The two agree within their ±.
The carrier's tail is bored .625 (std.ar15.carrier_tail_bore), and this end goes in to its first shoulder with O-rings that hold it: read at this scale on the two photos it is 0.012 to 0.026 under the bore, which the O-rings' stand makes up. (Read until 2026-10-18 on Law Tactical's 99312-5, which is the GEN-S's extension, not this part's.)
Bolt carrier extension: the end in the carrier, to its first shoulder0.466 in ± 0.025 in 11.8 mmCorroboratedPhoto: Midwest Gun Works, LTGEN3MFDE: the FDE Gen 3-M closed, its black bolt carrier extension standing on its head end beside it, seen from in front and 17 degrees above (its top end's rim an ellipse 0.30 of its width); 1500 px
Photo 0.466 in ± 0.025 in used
Midwest Gun Works, LTGEN3MFDE: the FDE Gen 3-M closed, its black bolt carrier extension standing on its head end beside it, seen from in front and 17 degrees above (its top end's rim an ellipse 0.30 of its width); 1500 px, harvested
Scale: its length from the first shoulder's plane (row 576) to its head end's plane (841), 265 px, as .added_length: what it fills between the carrier and the buffer (the patent: "This extension in length can compensate for the length added to the rifle by the addition of the folding stock adapter 100"): 203.8 px/in along it, and 213.6 px/in across (its lengths foreshortened by cos 17.4 degrees). Read by its silhouette's width row by row (luminance under 200), its axis fitted through the rows' middles (2.3 degrees off upright) and the widths taken square to it; a plane is the row where the silhouette reaches that section's full width; the pilot 128 px
rows 481 (the top end's plane) to 576 (95 px)
Photo 0.493 in ± 0.025 in
Midwest Gun Works, 99312_Z: the black Gen 3-M closed, its bolt carrier extension standing on its head end beside it, seen from in front and 28 degrees above (its top end's rim an ellipse 0.47 of its width); 1500 px, harvested
Scale: its length from the first shoulder's plane (row 516) to its head end's plane (777), 261 px, as .added_length: 200.8 px/in along it, and 228.2 px/in across (cos 28.3 degrees). Read by as the FDE photo's (its axis 4.4 degrees off upright); the pilot 140 px
rows 417 to 516 (99 px)
Nearer side-on; the two agree within their ±.
Bolt carrier extension: the collar (its first shoulder), across0.712 in ± 0.02 in 18.1 mmCorroboratedPhoto: Midwest Gun Works, LTGEN3MFDE: the FDE Gen 3-M closed, its black bolt carrier extension standing on its head end beside it, seen from in front and 17 degrees above (its top end's rim an ellipse 0.30 of its width); 1500 px
Photo 0.712 in ± 0.02 in used
Midwest Gun Works, LTGEN3MFDE: the FDE Gen 3-M closed, its black bolt carrier extension standing on its head end beside it, seen from in front and 17 degrees above (its top end's rim an ellipse 0.30 of its width); 1500 px, harvested
Scale: its length from the first shoulder's plane (row 576) to its head end's plane (841), 265 px, as .added_length: what it fills between the carrier and the buffer (the patent: "This extension in length can compensate for the length added to the rifle by the addition of the folding stock adapter 100"): 203.8 px/in along it, and 213.6 px/in across (its lengths foreshortened by cos 17.4 degrees). Read by its silhouette's width row by row (luminance under 200), its axis fitted through the rows' middles (2.3 degrees off upright) and the widths taken square to it; a plane is the row where the silhouette reaches that section's full width; the pilot 128 px
152 px
Photo 0.723 in ± 0.02 in
Midwest Gun Works, 99312_Z: the black Gen 3-M closed, its bolt carrier extension standing on its head end beside it, seen from in front and 28 degrees above (its top end's rim an ellipse 0.47 of its width); 1500 px, harvested
Scale: its length from the first shoulder's plane (row 516) to its head end's plane (777), 261 px, as .added_length: 200.8 px/in along it, and 228.2 px/in across (cos 28.3 degrees). Read by as the FDE photo's (its axis 4.4 degrees off upright); the pilot 140 px
165 px
Nearer side-on; the two agree within their ±.
Bolt carrier extension: the collar, along0.093 in ± 0.025 in 2.4 mmCorroboratedPhoto: Midwest Gun Works, LTGEN3MFDE: the FDE Gen 3-M closed, its black bolt carrier extension standing on its head end beside it, seen from in front and 17 degrees above (its top end's rim an ellipse 0.30 of its width); 1500 px
Photo 0.093 in ± 0.025 in used
Midwest Gun Works, LTGEN3MFDE: the FDE Gen 3-M closed, its black bolt carrier extension standing on its head end beside it, seen from in front and 17 degrees above (its top end's rim an ellipse 0.30 of its width); 1500 px, harvested
Scale: its length from the first shoulder's plane (row 576) to its head end's plane (841), 265 px, as .added_length: what it fills between the carrier and the buffer (the patent: "This extension in length can compensate for the length added to the rifle by the addition of the folding stock adapter 100"): 203.8 px/in along it, and 213.6 px/in across (its lengths foreshortened by cos 17.4 degrees). Read by its silhouette's width row by row (luminance under 200), its axis fitted through the rows' middles (2.3 degrees off upright) and the widths taken square to it; a plane is the row where the silhouette reaches that section's full width; the pilot 128 px
rows 576 to 595, where its width begins to fall (the front of its lower face's rim)
Photo 0.12 in ± 0.025 in
Midwest Gun Works, 99312_Z: the black Gen 3-M closed, its bolt carrier extension standing on its head end beside it, seen from in front and 28 degrees above (its top end's rim an ellipse 0.47 of its width); 1500 px, harvested
Scale: its length from the first shoulder's plane (row 516) to its head end's plane (777), 261 px, as .added_length: 200.8 px/in along it, and 228.2 px/in across (cos 28.3 degrees). Read by as the FDE photo's (its axis 4.4 degrees off upright); the pilot 140 px
rows 516 to 540
Nearer side-on; the two agree within their ±.
Bolt carrier extension: the neck behind the collar, across0.468 in ± 0.02 in 11.9 mmCorroboratedPhoto: Midwest Gun Works, LTGEN3MFDE: the FDE Gen 3-M closed, its black bolt carrier extension standing on its head end beside it, seen from in front and 17 degrees above (its top end's rim an ellipse 0.30 of its width); 1500 px
Photo 0.468 in ± 0.02 in used
Midwest Gun Works, LTGEN3MFDE: the FDE Gen 3-M closed, its black bolt carrier extension standing on its head end beside it, seen from in front and 17 degrees above (its top end's rim an ellipse 0.30 of its width); 1500 px, harvested
Scale: its length from the first shoulder's plane (row 576) to its head end's plane (841), 265 px, as .added_length: what it fills between the carrier and the buffer (the patent: "This extension in length can compensate for the length added to the rifle by the addition of the folding stock adapter 100"): 203.8 px/in along it, and 213.6 px/in across (its lengths foreshortened by cos 17.4 degrees). Read by its silhouette's width row by row (luminance under 200), its axis fitted through the rows' middles (2.3 degrees off upright) and the widths taken square to it; a plane is the row where the silhouette reaches that section's full width; the pilot 128 px
100 px
Photo 0.469 in ± 0.02 in
Midwest Gun Works, 99312_Z: the black Gen 3-M closed, its bolt carrier extension standing on its head end beside it, seen from in front and 28 degrees above (its top end's rim an ellipse 0.47 of its width); 1500 px, harvested
Scale: its length from the first shoulder's plane (row 516) to its head end's plane (777), 261 px, as .added_length: 200.8 px/in along it, and 228.2 px/in across (cos 28.3 degrees). Read by as the FDE photo's (its axis 4.4 degrees off upright); the pilot 140 px
107 px
Nearer side-on; the two agree.
Bolt carrier extension: the neck, along (to where it flares)0.206 in ± 0.025 in 5.2 mmCorroboratedPhoto: Midwest Gun Works, LTGEN3MFDE: the FDE Gen 3-M closed, its black bolt carrier extension standing on its head end beside it, seen from in front and 17 degrees above (its top end's rim an ellipse 0.30 of its width); 1500 px
Photo 0.206 in ± 0.025 in used
Midwest Gun Works, LTGEN3MFDE: the FDE Gen 3-M closed, its black bolt carrier extension standing on its head end beside it, seen from in front and 17 degrees above (its top end's rim an ellipse 0.30 of its width); 1500 px, harvested
Scale: its length from the first shoulder's plane (row 576) to its head end's plane (841), 265 px, as .added_length: what it fills between the carrier and the buffer (the patent: "This extension in length can compensate for the length added to the rifle by the addition of the folding stock adapter 100"): 203.8 px/in along it, and 213.6 px/in across (its lengths foreshortened by cos 17.4 degrees). Read by its silhouette's width row by row (luminance under 200), its axis fitted through the rows' middles (2.3 degrees off upright) and the widths taken square to it; a plane is the row where the silhouette reaches that section's full width; the pilot 128 px
rows 595 to 637
Photo 0.194 in ± 0.025 in
Midwest Gun Works, 99312_Z: the black Gen 3-M closed, its bolt carrier extension standing on its head end beside it, seen from in front and 28 degrees above (its top end's rim an ellipse 0.47 of its width); 1500 px, harvested
Scale: its length from the first shoulder's plane (row 516) to its head end's plane (777), 261 px, as .added_length: 200.8 px/in along it, and 228.2 px/in across (cos 28.3 degrees). Read by as the FDE photo's (its axis 4.4 degrees off upright); the pilot 140 px
rows 540 to 579
Nearer side-on; the two agree.
Bolt carrier extension: the cone from the neck to the body, along0.206 in ± 0.025 in 5.2 mmCorroboratedPhoto: Midwest Gun Works, LTGEN3MFDE: the FDE Gen 3-M closed, its black bolt carrier extension standing on its head end beside it, seen from in front and 17 degrees above (its top end's rim an ellipse 0.30 of its width); 1500 px
Photo 0.206 in ± 0.025 in used
Midwest Gun Works, LTGEN3MFDE: the FDE Gen 3-M closed, its black bolt carrier extension standing on its head end beside it, seen from in front and 17 degrees above (its top end's rim an ellipse 0.30 of its width); 1500 px, harvested
Scale: its length from the first shoulder's plane (row 576) to its head end's plane (841), 265 px, as .added_length: what it fills between the carrier and the buffer (the patent: "This extension in length can compensate for the length added to the rifle by the addition of the folding stock adapter 100"): 203.8 px/in along it, and 213.6 px/in across (its lengths foreshortened by cos 17.4 degrees). Read by its silhouette's width row by row (luminance under 200), its axis fitted through the rows' middles (2.3 degrees off upright) and the widths taken square to it; a plane is the row where the silhouette reaches that section's full width; the pilot 128 px
rows 637 to 679
Photo 0.209 in ± 0.025 in
Midwest Gun Works, 99312_Z: the black Gen 3-M closed, its bolt carrier extension standing on its head end beside it, seen from in front and 28 degrees above (its top end's rim an ellipse 0.47 of its width); 1500 px, harvested
Scale: its length from the first shoulder's plane (row 516) to its head end's plane (777), 261 px, as .added_length: 200.8 px/in along it, and 228.2 px/in across (cos 28.3 degrees). Read by as the FDE photo's (its axis 4.4 degrees off upright); the pilot 140 px
rows 579 to 621
Nearer side-on; the two agree.
Bolt carrier extension: the body, across0.714 in ± 0.02 in 18.1 mmCorroboratedPhoto: Midwest Gun Works, LTGEN3MFDE: the FDE Gen 3-M closed, its black bolt carrier extension standing on its head end beside it, seen from in front and 17 degrees above (its top end's rim an ellipse 0.30 of its width); 1500 px
Photo 0.714 in ± 0.02 in used
Midwest Gun Works, LTGEN3MFDE: the FDE Gen 3-M closed, its black bolt carrier extension standing on its head end beside it, seen from in front and 17 degrees above (its top end's rim an ellipse 0.30 of its width); 1500 px, harvested
Scale: its length from the first shoulder's plane (row 576) to its head end's plane (841), 265 px, as .added_length: what it fills between the carrier and the buffer (the patent: "This extension in length can compensate for the length added to the rifle by the addition of the folding stock adapter 100"): 203.8 px/in along it, and 213.6 px/in across (its lengths foreshortened by cos 17.4 degrees). Read by its silhouette's width row by row (luminance under 200), its axis fitted through the rows' middles (2.3 degrees off upright) and the widths taken square to it; a plane is the row where the silhouette reaches that section's full width; the pilot 128 px
152.5 px
Photo 0.71 in ± 0.02 in
Midwest Gun Works, 99312_Z: the black Gen 3-M closed, its bolt carrier extension standing on its head end beside it, seen from in front and 28 degrees above (its top end's rim an ellipse 0.47 of its width); 1500 px, harvested
Scale: its length from the first shoulder's plane (row 516) to its head end's plane (777), 261 px, as .added_length: 200.8 px/in along it, and 228.2 px/in across (cos 28.3 degrees). Read by as the FDE photo's (its axis 4.4 degrees off upright); the pilot 140 px
162 px
Nearer side-on; the two agree.
A darker band round its lower part in both photos (an O-ring or another finish, flush: the silhouette doesn't change there) isn't drawn.
Bolt carrier extension: the body, along0.25 in ± 0.025 in 6.3 mmCorroboratedPhoto: Midwest Gun Works, LTGEN3MFDE: the FDE Gen 3-M closed, its black bolt carrier extension standing on its head end beside it, seen from in front and 17 degrees above (its top end's rim an ellipse 0.30 of its width); 1500 px
Photo 0.25 in ± 0.025 in used
Midwest Gun Works, LTGEN3MFDE: the FDE Gen 3-M closed, its black bolt carrier extension standing on its head end beside it, seen from in front and 17 degrees above (its top end's rim an ellipse 0.30 of its width); 1500 px, harvested
Scale: its length from the first shoulder's plane (row 576) to its head end's plane (841), 265 px, as .added_length: what it fills between the carrier and the buffer (the patent: "This extension in length can compensate for the length added to the rifle by the addition of the folding stock adapter 100"): 203.8 px/in along it, and 213.6 px/in across (its lengths foreshortened by cos 17.4 degrees). Read by its silhouette's width row by row (luminance under 200), its axis fitted through the rows' middles (2.3 degrees off upright) and the widths taken square to it; a plane is the row where the silhouette reaches that section's full width; the pilot 128 px
rows 679 to 730, where its width begins to fall to the stem's
Photo 0.269 in ± 0.025 in
Midwest Gun Works, 99312_Z: the black Gen 3-M closed, its bolt carrier extension standing on its head end beside it, seen from in front and 28 degrees above (its top end's rim an ellipse 0.47 of its width); 1500 px, harvested
Scale: its length from the first shoulder's plane (row 516) to its head end's plane (777), 261 px, as .added_length: 200.8 px/in along it, and 228.2 px/in across (cos 28.3 degrees). Read by as the FDE photo's (its axis 4.4 degrees off upright); the pilot 140 px
rows 621 to 675
Nearer side-on; the two agree within their ±.
Bolt carrier extension: the stem behind the body, across0.48 in ± 0.02 in 12.2 mmCorroboratedPhoto: Midwest Gun Works, LTGEN3MFDE: the FDE Gen 3-M closed, its black bolt carrier extension standing on its head end beside it, seen from in front and 17 degrees above (its top end's rim an ellipse 0.30 of its width); 1500 px
Photo 0.48 in ± 0.02 in used
Midwest Gun Works, LTGEN3MFDE: the FDE Gen 3-M closed, its black bolt carrier extension standing on its head end beside it, seen from in front and 17 degrees above (its top end's rim an ellipse 0.30 of its width); 1500 px, harvested
Scale: its length from the first shoulder's plane (row 576) to its head end's plane (841), 265 px, as .added_length: what it fills between the carrier and the buffer (the patent: "This extension in length can compensate for the length added to the rifle by the addition of the folding stock adapter 100"): 203.8 px/in along it, and 213.6 px/in across (its lengths foreshortened by cos 17.4 degrees). Read by its silhouette's width row by row (luminance under 200), its axis fitted through the rows' middles (2.3 degrees off upright) and the widths taken square to it; a plane is the row where the silhouette reaches that section's full width; the pilot 128 px
102.5 px
Photo 0.469 in ± 0.02 in
Midwest Gun Works, 99312_Z: the black Gen 3-M closed, its bolt carrier extension standing on its head end beside it, seen from in front and 28 degrees above (its top end's rim an ellipse 0.47 of its width); 1500 px, harvested
Scale: its length from the first shoulder's plane (row 516) to its head end's plane (777), 261 px, as .added_length: 200.8 px/in along it, and 228.2 px/in across (cos 28.3 degrees). Read by as the FDE photo's (its axis 4.4 degrees off upright); the pilot 140 px
107 px
Nearer side-on; the two agree.
Bolt carrier extension: the stem, along0.383 in ± 0.025 in 9.7 mmConflictPhoto: Midwest Gun Works, LTGEN3MFDE: the FDE Gen 3-M closed, its black bolt carrier extension standing on its head end beside it, seen from in front and 17 degrees above (its top end's rim an ellipse 0.30 of its width); 1500 px
Photo 0.383 in ± 0.025 in used
Midwest Gun Works, LTGEN3MFDE: the FDE Gen 3-M closed, its black bolt carrier extension standing on its head end beside it, seen from in front and 17 degrees above (its top end's rim an ellipse 0.30 of its width); 1500 px, harvested
Scale: its length from the first shoulder's plane (row 576) to its head end's plane (841), 265 px, as .added_length: what it fills between the carrier and the buffer (the patent: "This extension in length can compensate for the length added to the rifle by the addition of the folding stock adapter 100"): 203.8 px/in along it, and 213.6 px/in across (its lengths foreshortened by cos 17.4 degrees). Read by its silhouette's width row by row (luminance under 200), its axis fitted through the rows' middles (2.3 degrees off upright) and the widths taken square to it; a plane is the row where the silhouette reaches that section's full width; the pilot 128 px
rows 730 to 808, where the head's flare begins
Photo 0.329 in ± 0.025 in
Midwest Gun Works, 99312_Z: the black Gen 3-M closed, its bolt carrier extension standing on its head end beside it, seen from in front and 28 degrees above (its top end's rim an ellipse 0.47 of its width); 1500 px, harvested
Scale: its length from the first shoulder's plane (row 516) to its head end's plane (777), 261 px, as .added_length: 200.8 px/in along it, and 228.2 px/in across (cos 28.3 degrees). Read by as the FDE photo's (its axis 4.4 degrees off upright); the pilot 140 px
rows 675 to 741
Nearer side-on, so less of its length rests on the elevation read; the black photo's reading stays beside it as a conflict.
mgw-fde and mgw-black differ by 0.054 in beyond what each states it is good to.
The two photos differ by more than their ± here (the stem's ends read 0.054 in apart once each is scaled by its own length behind the shoulder): kept apart, not averaged. Each photo is from close by and from above, and its scale may change along the part.
Bolt carrier extension: its head (the end the buffer bears on), across0.623 in ± 0.02 in 15.8 mmCorroboratedPhoto: Midwest Gun Works, LTGEN3MFDE: the FDE Gen 3-M closed, its black bolt carrier extension standing on its head end beside it, seen from in front and 17 degrees above (its top end's rim an ellipse 0.30 of its width); 1500 px
Photo 0.623 in ± 0.02 in used
Midwest Gun Works, LTGEN3MFDE: the FDE Gen 3-M closed, its black bolt carrier extension standing on its head end beside it, seen from in front and 17 degrees above (its top end's rim an ellipse 0.30 of its width); 1500 px, harvested
Scale: its length from the first shoulder's plane (row 576) to its head end's plane (841), 265 px, as .added_length: what it fills between the carrier and the buffer (the patent: "This extension in length can compensate for the length added to the rifle by the addition of the folding stock adapter 100"): 203.8 px/in along it, and 213.6 px/in across (its lengths foreshortened by cos 17.4 degrees). Read by its silhouette's width row by row (luminance under 200), its axis fitted through the rows' middles (2.3 degrees off upright) and the widths taken square to it; a plane is the row where the silhouette reaches that section's full width; the pilot 128 px
133 px at its widest, where the flare from the stem ends
Photo 0.609 in ± 0.02 in
Midwest Gun Works, 99312_Z: the black Gen 3-M closed, its bolt carrier extension standing on its head end beside it, seen from in front and 28 degrees above (its top end's rim an ellipse 0.47 of its width); 1500 px, harvested
Scale: its length from the first shoulder's plane (row 516) to its head end's plane (777), 261 px, as .added_length: 200.8 px/in along it, and 228.2 px/in across (cos 28.3 degrees). Read by as the FDE photo's (its axis 4.4 degrees off upright); the pilot 140 px
139 px
Nearer side-on; the two agree.
Bolt carrier extension: the head's flare and rim, along0.161 in ± 0.025 in 4.1 mmCorroboratedPhoto: Midwest Gun Works, LTGEN3MFDE: the FDE Gen 3-M closed, its black bolt carrier extension standing on its head end beside it, seen from in front and 17 degrees above (its top end's rim an ellipse 0.30 of its width); 1500 px
Photo 0.161 in ± 0.025 in used
Midwest Gun Works, LTGEN3MFDE: the FDE Gen 3-M closed, its black bolt carrier extension standing on its head end beside it, seen from in front and 17 degrees above (its top end's rim an ellipse 0.30 of its width); 1500 px, harvested
Scale: its length from the first shoulder's plane (row 576) to its head end's plane (841), 265 px, as .added_length: what it fills between the carrier and the buffer (the patent: "This extension in length can compensate for the length added to the rifle by the addition of the folding stock adapter 100"): 203.8 px/in along it, and 213.6 px/in across (its lengths foreshortened by cos 17.4 degrees). Read by its silhouette's width row by row (luminance under 200), its axis fitted through the rows' middles (2.3 degrees off upright) and the widths taken square to it; a plane is the row where the silhouette reaches that section's full width; the pilot 128 px
rows 808 to 841 (the flare to 835, its rim to the end's plane)
Photo 0.179 in ± 0.025 in
Midwest Gun Works, 99312_Z: the black Gen 3-M closed, its bolt carrier extension standing on its head end beside it, seen from in front and 28 degrees above (its top end's rim an ellipse 0.47 of its width); 1500 px, harvested
Scale: its length from the first shoulder's plane (row 516) to its head end's plane (777), 261 px, as .added_length: 200.8 px/in along it, and 228.2 px/in across (cos 28.3 degrees). Read by as the FDE photo's (its axis 4.4 degrees off upright); the pilot 140 px
rows 741 to 777 (the flare to 768)
Nearer side-on; the two agree.
The hinge bolt's socket head, across (in a counterbore in the upper tab's top)0.317 in ± 0.02 in 8.1 mmProvisionalPhoto: T.REX Arms' gallery, TAN-7945: the FDE adapter opened about 90 degrees, from above and in front; 3000 px
Photo 0.317 in ± 0.02 in used
T.REX Arms' gallery, TAN-7945: the FDE adapter opened about 90 degrees, from above and in front; 3000 px, harvested
Scale: the upper tab's top rim in the same plane, 193 px across (columns 1452 to 1645), as .knuckle_d. Read by the black head's rim, 127 px across (columns 1485 to 1612), on a 3x crop; widths across the picture, which the view from above and in front doesn't foreshorten
The counterbore the hinge bolt's head sits in, across0.374 in ± 0.02 in 9.5 mmProvisionalPhoto: T.REX Arms, the FDE adapter opened, from above and in front; 3000 px
Photo 0.374 in ± 0.02 in used
T.REX Arms, the FDE adapter opened, from above and in front; 3000 px, harvested
Scale: the upper tab's top rim, 193 px across, as .knuckle_d. Read by the tab's tan rim's inner edge, 150 px across (columns 1475 to 1625)
The hinge bolt's hex socket, across its flats0.125 in ± 0.002 in 3.2 mmConfirmedPublished: Law Tactical, Generation 3-M AR Folding Stock Adapter instructions (no text layer: read from its pages as pictures), Maintenance, the maker, read Oct 18, 2026
Published “Hinge Tension: A 1/8 Allen Wrench can be used to increase hinge tension by tightening the Hinge Screw (10).” used
Law Tactical, Generation 3-M AR Folding Stock Adapter instructions (no text layer: read from its pages as pictures), Maintenance, the maker, read Oct 18, 2026 the page, harvested Oct 18, 2026
The key that turns it is 1/8 in: its socket is that across the flats. T.REX's photo has the socket some 60 px of the tab's 193 (0.15 in, across its corners).
How far the bolt's head stands under the upper tab's top0.04 in ± 0.02 in 1 mmProvisionalWorked out: An assumption for the drawing, not a reading: T.REX's photo from above shows the counterbore's wall dark above the head, so the head is below the rim; by how much isn't seen.
Worked out 0.04 in ± 0.02 in used
An assumption for the drawing, not a reading: T.REX's photo from above shows the counterbore's wall dark above the head, so the head is below the rim; by how much isn't seen., harvested
The bolt's head, its height (and the counterbore's depth under it)0.15 in ± 0.05 in 3.8 mmProvisionalWorked out: An assumption for the drawing, not a reading: no view shows the head in profile; about half its width, as a socket head is.
Worked out 0.15 in ± 0.05 in used
An assumption for the drawing, not a reading: no view shows the head in profile; about half its width, as a socket head is., harvested
The bolt head's hex socket, its depth0.08 in ± 0.03 in 2 mmProvisionalWorked out: An assumption for the drawing, not a reading: the socket's floor isn't seen.
Worked out 0.08 in ± 0.03 in used
An assumption for the drawing, not a reading: the socket's floor isn't seen., harvested
What it goes with
By the way it mounts, and the figures each part on file states: a part whose figures say it doesn't fit is left out, and one whose fit can't be checked from what is published is marked. A check is against published figures, not a guarantee.
AR-15 receiver extension thread
- Lower receivers
- Aero Precision M4E1 complete lower, A2 grip and M4 stock, Aero Precision M4E1 Stripped Lower Receiver, Battle Arms Development Workhorse stripped lower, BCM MK2 AR-15 Lower Receiver, Bear Creek Arsenal BC-15 Multi Caliber, Lower Receiver, Black Anodized, Geissele Automatics Super Duty AR-15 Lower Receiver - Stripped Lower, Palmetto State Armory AR-15 "Stealth" Stripped Lower Receiver
- Folding stock adapters
- Law Tactical AR Folding Stock Adapter GEN-S, Sylvan Arms SA5 Pro AR15 Folding Stock Adapter (Opens To The Left), Sylvan Arms SA5 Pro AR15 Folding Stock Adapter (Opens To The Right)
AR-15 receiver extension thread
- Folding stock adapters
- Law Tactical AR Folding Stock Adapter GEN-S, Sylvan Arms SA5 Pro AR15 Folding Stock Adapter (Opens To The Left), Sylvan Arms SA5 Pro AR15 Folding Stock Adapter (Opens To The Right)
- Receiver extensions
- BCM Milspec Carbine Receiver Extension (Buffer Tube) 6 Position, BCM MK2 Receiver Extension, Geissele Automatics Premium Mil-Spec Buffer Tube, Guntec USA AR-15 Mil-Spec Buffer Tube (Gen 2), SB Tactical SBPDW receiver extension, housing and integral castle nut, VLTOR RE-A5 7-Position Receiver Extension, MilSpec Diameter
Prices on file
Each seller's latest reading of its own page: before tax and shipping, and not a quote. The pages are read again every night.
- Midwest Gun Works $259.00 FDE Nov 21, 2026, out of stock that day
- T.REX ARMS $265.00 Black Nov 21, 2026, out of stock that day
- Midwest Gun Works $269.99 Black Nov 21, 2026, out of stock that day
- T.REX ARMS $275.00 FDE Nov 21, 2026, out of stock that day