Buffer spring
BCM Carbine Action Spring
The spring inside the receiver extension, round the buffer, that sends the bolt carrier forward again after each shot. BCM: "Action spring for AR15, M4 adjustable stocks." "Made to M4A1 Mil-Spec specifications."

- Weight
- 1.95 oz ± 0.13 oz Provisionalworked out: 3.14159265 * ({.od} - {.wire_d}) * {.coils} * 0.785398163 * {.wire_d} * {.wire_d} * {std.density.steel}
- Lowest price
- $4.50 at BCM, read Nov 21, 2026
- Maker's number
- SPRING-CARBINE-ACTION
- Colour
- BCM action spring, heat-treated wire
- Drawn as
- modelled
- Maker's page
- bravocompanyusa.com
In “BCM 16 in mid-length”, a build on the start page, as it is.
Its figures
Every figure the site draws and checks it by, with where it came from. Open one for each source's reading, and why one is used where they differ.
Wire diameter0.072 in ± 0.001 in 1.8 mmProvisionalWorked out: {std.carbine_action_spring.wire_d}
Worked out 0.072 in ± 0.001 in used
{std.carbine_action_spring.wire_d}, harvested
Outside diameter of its coils0.94 in ± 0.015 in 23.9 mmConfirmedWorked out: {std.carbine_action_spring.od}
Worked out 0.94 in ± 0.015 in used
{std.carbine_action_spring.od}, harvested
Total coils39 ± 1ProvisionalPhoto: BCM's Spring_Carbine_Action-2: the whole spring on white, lying on the diagonal, 1028 x 1028
Photo 38.5 count ± 1 count used
BCM's Spring_Carbine_Action-2: the whole spring on white, lying on the diagonal, 1028 x 1028, harvested
Scale: none: a count. Read by the crests of the spring's outline along each side of its axis (the axis is the dark pixels' principal axis): 38 on one side and 39 on the other, 27 to 35 px apart. A count of dark runs along a line inside the coils counts the near and the far strands both and isn't used
Worked out 37.5 count ± 0.1 count
{std.carbine_action_spring.coils}, harvested
The reference model's carbine spring.
Counted on BCM's own spring; the reference model's has a turn fewer and the reference set's table 36.
Free length10.7 in ± 0.05 in 271.8 mmProvisionalWorked out: {std.carbine_action_spring.free_length}
Worked out 10.7 in ± 0.05 in used
{std.carbine_action_spring.free_length}, harvested
Photo 10.9 in ± 0.4 in
BCM's Spring_Carbine_Action-2: the whole spring on white, lying on the diagonal, 1028 x 1028, harvested
Scale: the spring's own width in the middle of its length, 104.6 px, as the Army's .940 outside diameter (std.carbine_action_spring.od): 111.3 px/in. Read by its length along its axis, 1210.8 px; at its widest (108.6 px) the same length is 10.5 in, which the ± covers
The standard's figure; BCM's photo of its own spring has it within the photo's ±.
Its length as installed (a carbine buffer's seat to a mil-spec carbine extension's rear wall, bolt forward)6.972 in ± 0.03 in 177.1 mmProvisionalWorked out: {bcm-receiver-extension.tube_front_behind_pin} + {bcm-receiver-extension.tube_length} - {std.receiver_extension.carbine_rear_wall} + {std.ar15.upper_rear_face_x} - {std.carbine_buffer.head_thickness}
Worked out 6.972 in ± 0.03 in used
{bcm-receiver-extension.tube_front_behind_pin} + {bcm-receiver-extension.tube_length} - {std.receiver_extension.carbine_rear_wall} + {std.ar15.upper_rear_face_x} - {std.carbine_buffer.head_thickness}, harvested
What the spring is drawn at. A buffer's front face rests at the upper receiver's rear face (the carrier's rear end, bolt forward); the spring bears on the head's rear face and on the tube's rear wall inside. The reference model's assembly has 6.931 for it, with a tube 0.014 shorter and 0.027 further forward than the ledger's.
What it goes with
By the way it mounts, and the figures each part on file states: a part whose figures say it doesn't fit is left out, and one whose fit can't be checked from what is published is marked. A check is against published figures, not a guarantee.
Receiver extension bore
- Receiver extensions
- BCM Milspec Carbine Receiver Extension (Buffer Tube) 6 Position, BCM MK2 Receiver Extension, Geissele Automatics Premium Mil-Spec Buffer Tube, Guntec USA AR-15 Mil-Spec Buffer Tube (Gen 2), SB Tactical SBPDW receiver extension, housing and integral castle nut, VLTOR RE-A5 7-Position Receiver Extension, MilSpec Diameter
Prices on file
Each seller's latest reading of its own page: before tax and shipping, and not a quote. The pages are read again every night.
- BCM $4.50 Nov 21, 2026, in stock that day