Brace
SB Tactical SBA4® AR Adjustable Pistol Stabilizing Brace®
SB Tactical's five-position pistol stabilizing brace for a mil-spec carbine receiver extension, "Based on the popular SBM4® brace design": an M4-style housing round the tube with nine slots down each side, an ambidextrous QD socket through its nose, the adjustment lever in a block under it, a strut of two bars down to a cuff of two flaps at the rear, and a 1 in nylon strap round the cuff through a loop on its top. 10.25 oz. Its shape is read from the maker's straight left and rear views and the maker's pictures of it on a rifle; no drawing or design patent of it is on file.

- Weight
- 10.25 oz Conflictpublished: SB Tactical, SBA4 Pistol Stabilizing Brace specification sheet, REV DEC 2021 (Part Number SBA4X-01-SB, -02-SB, -03M-SB, -04-SB), the maker, read Oct 18, 2026Its sources span 10.18 oz to 10.26 oz.
- Lowest price
- $49.99 at Primary Arms, read Nov 21, 2026 (Stealth Gray)
- Maker's number
- SBA4X-01-SB
- Colours
- Black, FDE, OD Green, Stealth Gray
- Drawn as
- modelled
- Maker's page
- sb-tactical.com
In “BCM 11.5 in pistol on a Law GEN-S”, a build on the start page, as it is.
Its figures
Every figure the site draws and checks it by, with where it came from. Open one for each source's reading, and why one is used where they differ.
Overall length7 in 177.8 mmConflictPublished: Wing Tactical, SBA4 Brace From SB Tactical (SKU SBT-SBA4X; SPECIFICATIONS), a seller, read Oct 18, 2026
Published “Length: Approximately 7.5″”
SB Tactical, SBA4® AR Adjustable Pistol Stabilizing Brace® (the description's figures; the spec tab: "Length Approximately 7.5""), the maker, read Oct 18, 2026 the page, harvested Oct 18, 2026
The same figure as the sheets' 'Collapsed': a length on the rifle, by every reading of the brace itself 0.4 to 0.5 in more than the brace.
Published “Length: 7"” used
Wing Tactical, SBA4 Brace From SB Tactical (SKU SBT-SBA4X; SPECIFICATIONS), a seller, read Oct 18, 2026 the page, harvested Oct 18, 2026
The shop's own figure, with its own photographs (watermarked) of the brace.
Photo 7.09 in ± 0.05 in
SB Tactical: SBA4_onGun_Left_ghost_web, the black brace collapsed on a ghosted AR pistol, its left side, 1766 px, harvested
Scale: the lower's pivot and takedown pins, (778.6, 828.6) and (1152.8, 829), 374.1 px for the standard's 6.375 in (std.ar15.pin_spacing): 58.69 px/in. Read by the brace's silhouette under luminance 80, from its mouth (column 1264) to the cuff's rear (1679): 416 px
± for the pins' centres and the brace's ends, a pixel each. The brace's side stands about 0.7 in nearer the lens than the pins' heads, so at any distance under about 55 in it reads 1.3% long: this reading is Wing Tactical's 7 in seen from there, and not a second figure against it.
The brace's own length, which the maker doesn't state alone: Wing Tactical's figure, borne out by the maker's on-rifle picture (7.09, a little nearer the lens than the pins it is scaled by) and by the maker's own side and rear views' proportions with the shop's height and the maker's width. The maker's 7.5 is its 'Collapsed' length on a rifle (length_collapsed), kept beside it.
sb-page and on-rifle differ by 0.41 in beyond what each states it is good to.
The brace alone, from the cuff's rearmost point to the mouth round the tube. The maker's 7.5 is not this: its sheets give 7.5 as the brace's length 'Collapsed' and 10.25 'Extended' (the difference is four of the tube's 0.66 in steps and a little more), the SBA5's sheet gives 'Brace only' apart from 'Collapsed' (6.2 and 7.5), and on the maker's own picture of the brace collapsed on a rifle, framed by the lower's pins, the brace is 7.09 in long. Wing Tactical's 7 in, with its 5.31 in height, keeps the maker's straight side view's proportion to 0.6% and the straight rear view's (with the maker's 2.25 width) to 1%.
Height5.31 in 134.9 mmProvisionalPublished: Wing Tactical, SBA4 Brace From SB Tactical (SKU SBT-SBA4X; SPECIFICATIONS), a seller, read Oct 18, 2026
Published “Height: 5.31"” used
Wing Tactical, SBA4 Brace From SB Tactical (SKU SBT-SBA4X; SPECIFICATIONS), a seller, read Oct 18, 2026 the page, harvested Oct 18, 2026
From the top of the strap's loop over the cuff to the cuff's foot. Only Wing Tactical states one; the maker's straight side view, scaled by the 7 in length, is 5.34 in high (1244 x 949 px), and the straight rear view, by the maker's 2.25 width, 5.36.
Width2.25 in 57.1 mmConflictPublished: SB Tactical, SBA4 Pistol Stabilizing Brace specification sheet, REV DEC 2021 (Part Number SBA4X-01-SB, -02-SB, -03M-SB, -04-SB), the maker, read Oct 18, 2026
Published “Width (max): 2.25"” used
SB Tactical, SBA4 Pistol Stabilizing Brace specification sheet, REV DEC 2021 (Part Number SBA4X-01-SB, -02-SB, -03M-SB, -04-SB), the maker, read Oct 18, 2026 the page, harvested Oct 18, 2026
Published “Width: Approximately 2.25″”
SB Tactical, SBA4® AR Adjustable Pistol Stabilizing Brace® (the description's figures; the spec tab: "Length Approximately 7.5""), the maker, read Oct 18, 2026 the page, harvested Oct 18, 2026
Published “Width (max): 2.25"”
SB Tactical, SBA4 Pistol Stabilizing Brace specification sheet, REV APRIL 2020 (the brace with a tube, Part Number SBA4-01-SB ...), hosted by Aerospace Arms, the maker, read Oct 18, 2026 the page, harvested Oct 18, 2026
Published “Width: 2.21"”
Wing Tactical, SBA4 Brace From SB Tactical (SKU SBT-SBA4X; SPECIFICATIONS), a seller, read Oct 18, 2026 the page, harvested Oct 18, 2026
The maker's own figure for the widest point, on this product's sheet and its page; Wing Tactical's 2.21 is the shop's own, kept beside it.
sb-sheet and wing differ by 0.04 in beyond what each states it is good to.
sb-page and wing differ by 0.04 in beyond what each states it is good to.
sb-sheet-2020 and wing differ by 0.04 in beyond what each states it is good to.
The widest point: the housing's spade-shaped section near its rear (the rear view's widest row, 1.37 in under the loop's top). Wing Tactical's 2.21 is 1.8% under the maker's; the rear view's proportion with the shop's height reads 2.23.
The maker's length 'Collapsed' (its datum on the rifle not stated)7.5 in 190.5 mmConfirmedPublished: SB Tactical, SBA4 Pistol Stabilizing Brace specification sheet, REV DEC 2021 (Part Number SBA4X-01-SB, -02-SB, -03M-SB, -04-SB), the maker, read Oct 18, 2026
Published “Length: Collapsed: 7.5"” used
SB Tactical, SBA4 Pistol Stabilizing Brace specification sheet, REV DEC 2021 (Part Number SBA4X-01-SB, -02-SB, -03M-SB, -04-SB), the maker, read Oct 18, 2026 the page, harvested Oct 18, 2026
Published “Length: Collapsed: 7.5"”
SB Tactical, SBA4 Pistol Stabilizing Brace specification sheet, REV APRIL 2020 (the brace with a tube, Part Number SBA4-01-SB ...), hosted by Aerospace Arms, the maker, read Oct 18, 2026 the page, harvested Oct 18, 2026
This product's sheet; the 2020 sheet says the same.
Kept as published. With the brace collapsed on the maker's rifle its rear is 8.96 in behind the takedown pin and 7.83 behind the lower's rear face (std.ar15.receiver_rear_x): 7.5 is neither, nor the brace alone (7). Not used by the model or the build.
The maker's length 'Extended' (its datum on the rifle not stated)10.25 in 260.3 mmConfirmedPublished: SB Tactical, SBA4 Pistol Stabilizing Brace specification sheet, REV DEC 2021 (Part Number SBA4X-01-SB, -02-SB, -03M-SB, -04-SB), the maker, read Oct 18, 2026
Published “Extended: 10.25"” used
SB Tactical, SBA4 Pistol Stabilizing Brace specification sheet, REV DEC 2021 (Part Number SBA4X-01-SB, -02-SB, -03M-SB, -04-SB), the maker, read Oct 18, 2026 the page, harvested Oct 18, 2026
Published “Extended: 10.25"”
SB Tactical, SBA4 Pistol Stabilizing Brace specification sheet, REV APRIL 2020 (the brace with a tube, Part Number SBA4-01-SB ...), hosted by Aerospace Arms, the maker, read Oct 18, 2026 the page, harvested Oct 18, 2026
This product's sheet; the 2020 sheet says the same.
Kept as published: 2.75 in more than 'Collapsed', where the brace's five positions are four of the tube's 0.66 in steps (2.64) apart.
Depth of the tube's cavity, from the mouth6.75 in 171.4 mmConfirmedPublished: SB Tactical, SBA4 Pistol Stabilizing Brace specification sheet, REV DEC 2021 (Part Number SBA4X-01-SB, -02-SB, -03M-SB, -04-SB), the maker, read Oct 18, 2026
Published “Cavity Depth: 6.75"” used
SB Tactical, SBA4 Pistol Stabilizing Brace specification sheet, REV DEC 2021 (Part Number SBA4X-01-SB, -02-SB, -03M-SB, -04-SB), the maker, read Oct 18, 2026 the page, harvested Oct 18, 2026
Published “Cavity Depth: 6.75"”
SB Tactical, SBA4 Pistol Stabilizing Brace specification sheet, REV APRIL 2020 (the brace with a tube, Part Number SBA4-01-SB ...), hosted by Aerospace Arms, the maker, read Oct 18, 2026 the page, harvested Oct 18, 2026
This product's sheet; the 2020 sheet says the same.
Strap width1 in 25.4 mmConfirmedPublished: SB Tactical, SBA4 Pistol Stabilizing Brace specification sheet, REV DEC 2021 (Part Number SBA4X-01-SB, -02-SB, -03M-SB, -04-SB), the maker, read Oct 18, 2026
Published “Strap Width: 1"” used
SB Tactical, SBA4 Pistol Stabilizing Brace specification sheet, REV DEC 2021 (Part Number SBA4X-01-SB, -02-SB, -03M-SB, -04-SB), the maker, read Oct 18, 2026 the page, harvested Oct 18, 2026
Published “Strap Width: 1"”
SB Tactical, SBA4 Pistol Stabilizing Brace specification sheet, REV APRIL 2020 (the brace with a tube, Part Number SBA4-01-SB ...), hosted by Aerospace Arms, the maker, read Oct 18, 2026 the page, harvested Oct 18, 2026
Photo 1.01 in ± 0.01 in
SB Tactical: the black brace straight from its left, 1766 px, harvested
Scale: the brace's 7 in length and 5.31 in height (1244 and 949 px: 178.2 px/in). Read by the strap's two edges across the cuff, columns 1185 and 1365: 180 px
A check of the side view's scale.
This product's sheet; the photo agrees.
The strap's loop over the cuff: its top above the housing's top edge0.331 in ± 0.01 in 8.4 mmProvisionalPhoto: SB Tactical: the black brace straight from its left, 1766 px
Photo 0.331 in ± 0.01 in used
SB Tactical: the black brace straight from its left, 1766 px, harvested
Scale: the brace's 7 in length and 5.31 in height (178.2 px/in). Read by the loop's top, row 406, over the housing's top edge, row 465, along the mouth's first five inches: 59 px
The loop is the brace's highest point and the side and rear outlines' origin; the housing's top edge runs level from the mouth to the step ahead of the cuff.
Tube axis below the housing's top edge0.65 in ± 0.03 in 16.5 mmProvisionalPhoto: SB Tactical: SBA4_onGun_Left_Extended_web, the brace extended on an AR pistol, the tube bare between the castle nut and the mouth, 1766 px
Photo 0.65 in ± 0.03 in used
SB Tactical: SBA4_onGun_Left_Extended_web, the brace extended on an AR pistol, the tube bare between the castle nut and the mouth, 1766 px, harvested
Scale: the tube's own 1.148 in (std.receiver_extension.milspec_od), 61.5 px across where no rail is (columns 1180 to 1220), and the indexing rail's foot 45.8 px under the tube's axis for the standard's 0.874 (std.receiver_extension.rail_bottom_below_axis): 53.5 px/in, and 55.2 if the black tube reads 3% thin on white. Read by the housing's top edge at the mouth (row 760.5) and the tube's top and bottom edges (rows 764.5 and 826), columns read down at half the step in brightness: the axis 35.3 px under the housing's top
± for the two scales and a pixel at each edge.
Tube axis below the top of the strap's loop (where the outlines' origin is)0.981 in ± 0.04 in 24.9 mmProvisionalWorked out: {.tube_axis_below_top} + {.loop_above_top}
Worked out 0.981 in ± 0.04 in used
{.tube_axis_below_top} + {.loop_above_top}, harvested
Rear behind the takedown pin at its first position (all the way forward), on a mil-spec carbine tube8.96 in ± 0.08 in 227.6 mmCorroboratedPhoto: SB Tactical: SBA4_onGun_Left_ghost_web, the brace collapsed on an AR pistol, left side, 1766 px
Photo 8.96 in ± 0.08 in used
SB Tactical: SBA4_onGun_Left_ghost_web, the brace collapsed on an AR pistol, left side, 1766 px, harvested
Scale: the lower's pins, 58.69 px/in (std.ar15.pin_spacing). Read by the brace's mouth (column 1264.5) 17 px behind the castle nut's rear face (1247.5): 0.29 in, from the castle nut's rear face at bcm-castle-nut.rear_face_behind_pin, 1.668, to 1.958; and the brace's own 7 in behind it
± for the castle nut's own figure (a reading in conflict), the gap's two pixels, and the length's.
Photo 8.97 in ± 0.18 in
a photo on file, harvested
Scale: the lower's pins, 58.69 px/in. Read by the cuff's rear (column 1679) behind the takedown pin (1152.8): 526.3 px
Read across the photo at the pins' scale: the cuff stands about 0.7 in nearer the lens than the pins and 800 px off the picture's middle, which moves it by up to 0.17 in toward the middle by where the lens stood (not read). A check of the first.
Read locally, from the castle nut's rear face next to the mouth, where the lens's place moves nothing; the pin-framed reading of the rear agrees within its ±.
Collapsed, as the maker pictures it on a rifle: the brace's mouth stands 0.29 in behind the castle nut's rear face. Its lock pin isn't seen in any photo (the boss under the lever is 4.64 in behind the pin there, on neither of the tube's first two holes, 4.18 and 4.84), so which of the tube's holes this is isn't read: the brace's own five positions are counted from here (its extended picture stands about four steps further back).
QD socket's steel insert: outside diameter (its rim, each side)0.42 in ± 0.02 in 10.7 mmProvisionalPhoto: a photo on file
Photo 0.42 in ± 0.02 in used
a photo on file, harvested
Scale: 178.2 px/in (the brace's length and height). Read by the insert's rim on a 4x crop, columns 276 to 351, rows 673 to 750: 75 px
QD socket's bore0.29 in ± 0.02 in 7.4 mmProvisionalPhoto: a photo on file
Photo 0.29 in ± 0.02 in used
a photo on file, harvested
Scale: 178.2 px/in. Read by the bright ground through the bore on a 4x crop, columns 288 to 339: 51 px
The lever block's width (between the strut's two bars)0.78 in ± 0.04 in 19.8 mmProvisionalPhoto: SB Tactical: SBA4_Rear_web, straight from behind, 1179 px
Photo 0.78 in ± 0.04 in used
SB Tactical: SBA4_Rear_web, straight from behind, 1179 px, harvested
Scale: the brace's 5.31 in height and 2.25 in width (862 and 362 px: 161.6 px/in). Read by the opening between the flaps at its top, where the block's underside closes it: 126 px
The block fills the gap between the bars in Wing Tactical's views from below (86a19fea5a2d, a8a4eb10c3a1).
The boss under the lever: its width across the brace0.34 in ± 0.03 in 8.6 mmProvisionalPhoto: a photo on file
Photo 0.34 in ± 0.03 in used
a photo on file, harvested
Scale: 161.6 px/in. Read by the boss seen in the opening's top, columns 553 to 608: 55 px
The strap's loop over the cuff: its width across the brace0.33 in ± 0.03 in 8.4 mmProvisionalPhoto: a photo on file
Photo 0.33 in ± 0.03 in used
a photo on file, harvested
Scale: 161.6 px/in. Read by the tab at the top, columns 566 to 620: 54 px
The strap's loop over the cuff: the bar over the strap (its depth, top to underside)0.067 in ± 0.012 in 1.7 mmProvisionalPhoto: a photo on file
Photo 0.067 in ± 0.012 in used
a photo on file, harvested
Scale: 178.2 px/in. Read by the loop's top (row 406) to the window's top over the strap (row 418), columns 1190 to 1360: 12 px
± two pixels: the window is a sliver of white ground between the bar and the strap's top.
The pin through the lever's plate (its end, each side)0.11 in ± 0.02 in 2.8 mmProvisionalPhoto: a photo on file
Photo 0.11 in ± 0.02 in used
a photo on file, harvested
Scale: 178.2 px/in. Read by the pin's dark end in the rounded square on the lever, on a 3x crop: 20 px across
Depth of the lever plate's three small slots and of the rounded square round its pin0.04 in ± 0.02 in 1 mmProvisionalWorked out: An assumption for the drawing, not a reading: the side views show each as a dark rim round a lit floor, and no view shows one in section.
Worked out 0.04 in ± 0.02 in used
An assumption for the drawing, not a reading: the side views show each as a dark rim round a lit floor, and no view shows one in section., harvested
The seam round the rear face's spade panel and its medallion: its width0.04 in ± 0.01 in 1 mmProvisionalPhoto: a photo on file
Photo 0.04 in ± 0.01 in used
a photo on file, harvested
Scale: 161.6 px/in. Read by the dark line round the panel, 3 to 4 px, taken as the shadowed wall of a groove whose lit wall beside it is as wide: twice 3.5 px
A fine groove lit from one side reads as its shadow alone, half its width.
The seam round the rear face's panel: its depth0.03 in ± 0.015 in 0.8 mmProvisionalWorked out: An assumption for the drawing, not a reading: the rear view shows the seam's line, and no view shows it in section.
Worked out 0.03 in ± 0.015 in used
An assumption for the drawing, not a reading: the rear view shows the seam's line, and no view shows it in section., harvested
Depth of the nine slots in the housing's sides0.12 in ± 0.06 in 3 mmProvisionalWorked out: An assumption for the drawing, not a reading: no view on file shows a slot in section. The obliques show them deep and dark, and one in Primary Arms' right view shows the ground through it (into the cavity); they are drawn as recesses of this depth.
Worked out 0.12 in ± 0.06 in used
An assumption for the drawing, not a reading: no view on file shows a slot in section. The obliques show them deep and dark, and one in Primary Arms' right view shows the ground through it (into the cavity); they are drawn as recesses of this depth., harvested
The strap's thickness0.05 in ± 0.03 in 1.3 mmProvisionalWorked out: An assumption for the drawing, not a reading: the sheet gives the strap's width (1 in) and no view shows its edge square.
Worked out 0.05 in ± 0.03 in used
An assumption for the drawing, not a reading: the sheet gives the strap's width (1 in) and no view shows its edge square., harvested
The cavity's clearance round a mil-spec tube and its rail (radial)0.01 in ± 0.01 in 0.3 mmProvisionalWorked out: An assumption for the drawing, not a reading: the cavity is drawn as the mil-spec tube and its indexing rail with this much room, so that the brace's faces and the tube's are not drawn in one place.
Worked out 0.01 in ± 0.01 in used
An assumption for the drawing, not a reading: the cavity is drawn as the mil-spec tube and its indexing rail with this much room, so that the brace's faces and the tube's are not drawn in one place., harvested
What it goes with
By the way it mounts, and the figures each part on file states: a part whose figures say it doesn't fit is left out, and one whose fit can't be checked from what is published is marked. A check is against published figures, not a guarantee.
Receiver extension (buffer tube)
Prices on file
Each seller's latest reading of its own page: before tax and shipping, and not a quote. The pages are read again every night.
- Primary Arms $49.99 Stealth Gray Nov 21, 2026, in stock that day
- GRITR Sports $68.99 Black Nov 21, 2026, in stock that day
- Primary Arms $69.99 Black Nov 21, 2026, in stock that day
- Wing Tactical $99.99 Nov 21, 2026, in stock that day
- AR15Discounts $99.99 Black Nov 21, 2026, stock not said
- AR15Discounts $99.99 FDE Nov 21, 2026, stock not said
- AR15Discounts $99.99 OD Green Nov 21, 2026, stock not said
- AR15Discounts $99.99 Stealth Gray Nov 21, 2026, stock not said