Buffer
KynSHOT RB5000
A hydraulic buffer: a sealed damper in a stainless body, its piston rod carrying the head the bolt carrier meets, used in place of a solid weighted buffer with the rifle's own spring. KynSHOT: "The KynSHOT RB5000 is a hydraulic recoil buffer engineered for AR-15 platforms with a Mil-Spec carbine buffer tube (7” internal depth). The RB5000 works with any Mil-Spec buffer spring and installs easily as a direct drop-in replacement for existing buffer systems." "Using patented technology, the RB5000 absorbs the recoil energy generated by the bolt carrier’s rearward movement, helping to eliminate bolt bounce during chambering." At rest it is 3.65 in long and pushed in 3.25, a standard carbine buffer's length: all4shooters, "The Kynshot, when extended, is longer than a standard buffer, and pulling back the bolt will result in the buffer contacting the rear end of the buffer tube too soon". The maker: "DO NOT USE IN PCC's."

- Weight
- 4.2 oz Conflictpublished: KynSHOT, KynSHOT RB5000 (product page, Specifications), the maker, read Oct 18, 2026Its sources span 2.5 oz to 5.45 oz.
- Lowest price
- $112.49 at MidwayUSA, read Nov 21, 2026
- Maker's number
- RB5000
- Colour
- Natural stainless
- Drawn as
- modelled
- Maker's page
- kynshot.com
In “BCM 16 in mid-length”, a build on the start page, in place of its BCM Carbine Buffer.
Its figures
Every figure the site draws and checks it by, with where it came from. Open one for each source's reading, and why one is used where they differ.
Length at rest (the head's front face to the bumper's end, the piston rod out)3.65 in 92.7 mmConfirmedPublished: KynSHOT, KynSHOT RB5000 (product page, Specifications), the maker, read Oct 18, 2026
Published “Overall length: 3.65"” used
KynSHOT, KynSHOT RB5000 (product page, Specifications), the maker, read Oct 18, 2026 the page, harvested Oct 18, 2026
Published “Dimensions 3.65 × 0.69 × 0.69 in”
AR15Discounts, KynSHOT Precision Carbine Recoil Damper For 5.56 / .223 (Additional information), a seller, read Oct 18, 2026 the page, harvested Oct 18, 2026
The maker's figure; the seller's is the same.
What it is drawn at: in a rifle with the bolt forward the spring holds the rod out, and the carrier rests on the head. all4shooters: "The Kynshot, when extended, is longer than a standard buffer, and pulling back the bolt will result in the buffer contacting the rear end of the buffer tube too soon".
Length pushed in (the piston rod in)3.25 in 82.5 mmConfirmedPublished: KynSHOT, KynSHOT RB5000 (product page, Specifications), the maker, read Oct 18, 2026
Published “Length when compressed: 3.25”” used
KynSHOT, KynSHOT RB5000 (product page, Specifications), the maker, read Oct 18, 2026 the page, harvested Oct 18, 2026
Diameter (its body: the maker's "Buffer diameter")0.69 in 17.5 mmConfirmedPublished: KynSHOT, KynSHOT RB5000 (product page, Specifications), the maker, read Oct 18, 2026
Published “Buffer diameter: .69"” used
KynSHOT, KynSHOT RB5000 (product page, Specifications), the maker, read Oct 18, 2026 the page, harvested Oct 18, 2026
Published “Dimensions 3.65 × 0.69 × 0.69 in”
AR15Discounts, KynSHOT Precision Carbine Recoil Damper For 5.56 / .223 (Additional information), a seller, read Oct 18, 2026 the page, harvested Oct 18, 2026
The maker's figure; the seller's is the same.
The body's. Its head, which runs in the receiver extension's bore, is larger: head_d.
Its head (the disc the carrier meets), diameter0.951 in ± 0.015 in 24.2 mmProvisionalPhoto: MidwayUSA 614230.jpg, 880 x 660, upright, nearly square, engraved "P/N RB5000 20223"
Photo 0.951 in ± 0.015 in used
MidwayUSA 614230.jpg, 880 x 660, upright, nearly square, engraved "P/N RB5000 20223", harvested
Scale: the body's 117.5 px for the maker's .69 in, in the same view (both polished steel, read thin alike). Read by the disc's width across the axis, 160 to 164 px along its rim
Read at the length scale it is 0.921 in, 3.2% thin, as the body is. Its maker's own photo (823ba35382b7, from above, the head furthest from the lens) has the disc 1.34 times the body: 0.925, a little small for being further off. The RB5000HP's reads 0.982 on its own photo: the two heads differ.
Its head: the flats round its rim (count)3ProvisionalPhoto: Impact Guns RSRKYNRB5000-1, 2000 px: the buffer upright, the head toward the lens and seen from above, engraved 25057
Photo 3 count used
Impact Guns RSRKYNRB5000-1, 2000 px: the buffer upright, the head toward the lens and seen from above, engraved 25057, harvested
Scale: none: a count. Read by two flats seen at once, one each side of the lens's line and as far round as each other (each about 60 degrees off it), with the round between them: three equally spaced has the third behind; the maker's photo (823ba35382b7) and the HP's three views show one flat or two in each, never a third beside them
No view on file looks along the axis at the face, so the whole turn isn't seen: three is what two flats 120 degrees apart, each alone in other views, come to. The standard buffer's head has three (std.carbine_buffer.head_flat_across).
Its head: from one flat to the round opposite0.924 in ± 0.02 in 23.5 mmProvisionalPhoto: Impact Guns RSRKYNRB5000-1, 2000 px: the head toward the lens, seen from above
Photo 0.924 in ± 0.02 in used
Impact Guns RSRKYNRB5000-1, 2000 px: the head toward the lens, seen from above, harvested
Scale: the disc's width across, 520 px, for head_d (0.951 in). Read by the two flats' spans across the image, 90 and 80 px: two flats 60 degrees each side of the lens's line show their chord times cos 60 each, so their sum is one chord, 0.31 in, whatever small turn the part has; a chord of 0.31 in on a 0.951 in circle stands 0.449 from the axis
Its head: the length of its full diameter, from the front face0.193 in ± 0.015 in 4.9 mmProvisionalPhoto: MidwayUSA 614230.jpg
Photo 0.193 in ± 0.015 in used
MidwayUSA 614230.jpg, harvested
Scale: 175.9 px/in along the axis (the maker's 3.65 in between the face's and the bumper's end's planes). Read by the silhouette's edges at the disc's full width, from the face's plane (row 10) to where they begin to fall (row 44): 34 px
Its head: front face to its rear face (where the spring bears)0.244 in ± 0.015 in 6.2 mmProvisionalPhoto: MidwayUSA 614230.jpg
Photo 0.244 in ± 0.015 in used
MidwayUSA 614230.jpg, harvested
Scale: 175.9 px/in along the axis. Read by from the face's plane (row 10) to the foot of the rim's rear bevel, where the edges reach the hub (row 53): 43 px
The standard carbine buffer's head is 0.254 (std.carbine_buffer.head_thickness): the catalog's spring, drawn from there, stands 0.01 in behind this one's face.
Its head: where the bevel behind its rim meets its rear face, diameter0.79 in ± 0.02 in 20.1 mmProvisionalPhoto: MidwayUSA 614230.jpg
Photo 0.79 in ± 0.02 in used
MidwayUSA 614230.jpg, harvested
Scale: the body's 117.5 px for .69 in. Read by the edges fall 14 px each side from the rim (rows 44 to 53) before they reach the hub: 0.951 less twice 0.082
Its head: the bevel round its front face0.015 in ± 0.01 in 0.4 mmProvisionalWorked out: An assumption for the drawing, not a reading: a bright line round the face's edge in Impact Guns' views from above (800fcb7d6a49) and MidwayUSA's, a few pixels across; no view on file shows it in profile.
Worked out 0.015 in ± 0.01 in used
An assumption for the drawing, not a reading: a bright line round the face's edge in Impact Guns' views from above (800fcb7d6a49) and MidwayUSA's, a few pixels across; no view on file shows it in profile., harvested
Its hub (behind the head, round the rod), diameter0.74 in ± 0.015 in 18.8 mmProvisionalPhoto: MidwayUSA 614230.jpg
Photo 0.74 in ± 0.015 in used
MidwayUSA 614230.jpg, harvested
Scale: the body's 117.5 px for .69 in. Read by the hub's width across the axis, 126 px (rows 55 to 71)
The spring's end coil sits over it, as over a standard buffer's pilot (0.781, std.carbine_buffer.pilot_d).
Its hub: length (the head's rear face to the hub's rear face)0.136 in ± 0.015 in 3.5 mmProvisionalPhoto: MidwayUSA 614230.jpg
Photo 0.136 in ± 0.015 in used
MidwayUSA 614230.jpg, harvested
Scale: 175.9 px/in along the axis. Read by rows 53 to 77, where the edges drop to the rod's: 24 px
Its hub: the bevel round its rear face0.017 in ± 0.01 in 0.4 mmProvisionalPhoto: MidwayUSA 614230.jpg
Photo 0.017 in ± 0.01 in used
MidwayUSA 614230.jpg, harvested
Scale: 175.9 px/in along the axis. Read by the edges turn in over 3 px (rows 71 to 74) before the rear face
Its hub: the hole across it (a set screw in it), diameter0.09 in ± 0.02 in 2.3 mmProvisionalPhoto: Impact Guns RSRKYNRB5000-1: a hole each side of the hub, threaded
Photo 0.09 in ± 0.02 in used
Impact Guns RSRKYNRB5000-1: a hole each side of the hub, threaded, harvested
Scale: the disc's 520 px across for head_d (0.951 in). Read by each hole's height, about 50 px
Its hub: how far the set screw's end stands below the hub's surface0.02 in ± 0.015 in 0.5 mmProvisionalWorked out: An assumption for the drawing, not a reading: a socket screw's end a little inside its hole in the RB5000HP's side photo (3bf8c2301cf9); the RB5000's own photos show the holes, not how deep the screw is.
Worked out 0.02 in ± 0.015 in used
An assumption for the drawing, not a reading: a socket screw's end a little inside its hole in the RB5000HP's side photo (3bf8c2301cf9); the RB5000's own photos show the holes, not how deep the screw is., harvested
Its piston rod, diameter0.167 in ± 0.01 in 4.2 mmProvisionalPhoto: MidwayUSA 614230.jpg
Photo 0.167 in ± 0.01 in used
MidwayUSA 614230.jpg, harvested
Scale: the body's 117.5 px for .69 in. Read by the rod's width across the axis, 27 to 30 px (rows 79 to 133)
Its piston rod: how far it stands out of the body at rest (the hub's rear face to the body's front face)0.324 in ± 0.015 in 8.2 mmProvisionalPhoto: MidwayUSA 614230.jpg
Photo 0.324 in ± 0.015 in used
MidwayUSA 614230.jpg, harvested
Scale: 175.9 px/in along the axis. Read by rows 77 to 134, where the edges leave the rod for the body's front: 57 px
Less than the 0.40 in the maker's two lengths differ by (3.65 at rest, 3.25 pushed in): pushed home, the hub would meet the body 0.08 in short of 3.25. What takes up the rest (the bumper giving, or a hub that enters the body's mouth) isn't on file: the model is drawn at rest, where it doesn't matter.
Its body: front face to rear face (where the bumper stands out)2.666 in ± 0.02 in 67.7 mmProvisionalPhoto: MidwayUSA 614230.jpg
Photo 2.666 in ± 0.02 in used
MidwayUSA 614230.jpg, harvested
Scale: 175.9 px/in along the axis. Read by rows 134 to 603, where the black bumper begins: 469 px
Its body: the bevel round its front face0.025 in ± 0.01 in 0.6 mmProvisionalPhoto: MidwayUSA 614230.jpg
Photo 0.025 in ± 0.01 in used
MidwayUSA 614230.jpg, harvested
Scale: 175.9 px/in along the axis. Read by the edges reach the body's full width 12 px behind its front face, 8 of them the face's own ellipse (r sin e)
Its body: the bevel round its rear face0.02 in ± 0.01 in 0.5 mmProvisionalWorked out: An assumption for the drawing, not a reading: a narrow bright band where the body meets the bumper in MidwayUSA's photo, too small to read against the bumper beside it.
Worked out 0.02 in ± 0.01 in used
An assumption for the drawing, not a reading: a narrow bright band where the body meets the bumper in MidwayUSA's photo, too small to read against the bumper beside it., harvested
Its body's mouth: the wall left round the bore the rod comes out of0.04 in ± 0.015 in 1 mmProvisionalWorked out: An assumption for the drawing, not a reading: a thin bright ring round a dark bore at the body's front in Impact Guns' views from above (800fcb7d6a49, 6171514cab7b) and the RB5000HP's side photo; no view looks into it square.
Worked out 0.04 in ± 0.015 in used
An assumption for the drawing, not a reading: a thin bright ring round a dark bore at the body's front in Impact Guns' views from above (800fcb7d6a49, 6171514cab7b) and the RB5000HP's side photo; no view looks into it square., harvested
Its body's mouth: how deep the seal stands inside it0.06 in ± 0.03 in 1.5 mmProvisionalWorked out: An assumption for the drawing, not a reading: the seal and the ring that holds it (all4shooters: "the Seeger ring that locks the hydraulic cartridge in the buffer's body") are a little way inside the mouth in every view; none shows how far.
Worked out 0.06 in ± 0.03 in used
An assumption for the drawing, not a reading: the seal and the ring that holds it (all4shooters: "the Seeger ring that locks the hydraulic cartridge in the buffer's body") are a little way inside the mouth in every view; none shows how far., harvested
Its bumper: how far it stands out of the body0.279 in ± 0.02 in 7.1 mmProvisionalPhoto: MidwayUSA 614230.jpg
Photo 0.279 in ± 0.02 in used
MidwayUSA 614230.jpg, harvested
Scale: 175.9 px/in along the axis. Read by rows 603 to 652 (the end's plane, 5 px in from the silhouette's tip): 49 px
Its bumper: diameter where it leaves the body0.67 in ± 0.02 in 17 mmProvisionalPhoto: MidwayUSA 614230.jpg
Photo 0.67 in ± 0.02 in used
MidwayUSA 614230.jpg, harvested
Scale: 175.9 px/in (matte rubber, read at the length scale) and the body's 117.5 px for .69 in. Read by 116 px at its shoulder: 0.66 at the length scale, 0.68 against the body
Its bumper: diameter where its taper meets the round of its end0.53 in ± 0.02 in 13.5 mmProvisionalPhoto: MidwayUSA 614230.jpg
Photo 0.53 in ± 0.02 in used
MidwayUSA 614230.jpg, harvested
Scale: 175.9 px/in along the axis (matte rubber). Read by 93 px at row 644, 0.233 in behind the body, where its edges begin to round in
Its bumper: the round from its taper onto its end face0.045 in ± 0.015 in 1.1 mmProvisionalWorked out: An assumption for the drawing, not a reading: the end's edges round in over the last 8 px (rows 644 to 652) of MidwayUSA's photo, the end face flat inside them in Impact Guns' (6171514cab7b).
Worked out 0.045 in ± 0.015 in used
An assumption for the drawing, not a reading: the end's edges round in over the last 8 px (rows 644 to 652) of MidwayUSA's photo, the end face flat inside them in Impact Guns' (6171514cab7b)., harvested
Its set screw: the hex socket in its end, across the flats0.05 in ± 0.01 in 1.3 mmProvisionalWorked out: An assumption for the drawing, not a reading: the RB5000HP's side photo (3bf8c2301cf9) shows a hex socket filling about half the screw's end; its size isn't read.
Worked out 0.05 in ± 0.01 in used
An assumption for the drawing, not a reading: the RB5000HP's side photo (3bf8c2301cf9) shows a hex socket filling about half the screw's end; its size isn't read., harvested
Its set screw: how deep its hex socket is0.03 in ± 0.015 in 0.8 mmProvisionalWorked out: An assumption for the drawing, not a reading: no view looks into the socket.
Worked out 0.03 in ± 0.015 in used
An assumption for the drawing, not a reading: no view looks into the socket., harvested
What it goes with
By the way it mounts, and the figures each part on file states: a part whose figures say it doesn't fit is left out, and one whose fit can't be checked from what is published is marked. A check is against published figures, not a guarantee.
Receiver extension bore
- Receiver extensions
- BCM Milspec Carbine Receiver Extension (Buffer Tube) 6 Position, BCM MK2 Receiver Extension, Geissele Automatics Premium Mil-Spec Buffer Tube, Guntec USA AR-15 Mil-Spec Buffer Tube (Gen 2), SB Tactical SBPDW receiver extension, housing and integral castle nut, VLTOR RE-A5 7-Position Receiver Extension, MilSpec Diameter
Prices on file
Each seller's latest reading of its own page: before tax and shipping, and not a quote. The pages are read again every night.
- MidwayUSA $112.49 Nov 21, 2026, in stock that day
- Primary Arms $119.99 Nov 17, 2026, in stock that day
- Impact Guns $124.69 Nov 21, 2026, in stock that day
- AR15Discounts $149.99 Nov 21, 2026, out of stock that day