Brace
SB Tactical SBA5® AR Adjustable Pistol Stabilizing Brace®
SB Tactical's five-position brace for a mil-spec carbine receiver extension: a housing round the tube with a wedge groove along its front, an adjustment lever under it with its two pins, a QD sling socket each side in a recessed panel, a strut down to the cuff, and the cuff (modelled after the SB15's): an end cap over two flaps that meet at their foot, with the strap's tab on top and the 1 in nylon strap round it. 9 oz by the maker's newest sheet. Its shape is read from the maker's straight left side picture and its straight view from behind; no drawing or design patent of it is on file.

- Weight
- 9 oz Conflictpublished: SB Tactical, SBA5 Pistol Stabilizing Brace specification sheet (FEB 2026), the maker, read Oct 18, 2026Its sources span 8.5 oz to 9.5 oz.
- Lowest price
- $65.95 at AR15Discounts, read Nov 21, 2026 (Black)
- Maker's number
- SBA5X-01-SB
- Colours
- Black, FDE, OD Green
- Drawn as
- modelled
- Maker's page
- sb-tactical.com
In “22RB .22 LR rifle”, a build on the start page, in place of its Magpul MOE SL carbine stock, mil-spec.
Its figures
Every figure the site draws and checks it by, with where it came from. Open one for each source's reading, and why one is used where they differ.
Overall length (the brace alone)6.2 in 157.5 mmConfirmedPublished: SB Tactical, SBA5 Pistol Stabilizing Brace specification sheet (FEB 2026), the maker, read Oct 18, 2026
Published “Length: 6.2" Brace only” used
SB Tactical, SBA5 Pistol Stabilizing Brace specification sheet (FEB 2026), the maker, read Oct 18, 2026 the page, harvested Oct 18, 2026
Published “Length: Approximately 6.125″”
SB Tactical, SBA5® AR Adjustable Pistol Stabilizing Brace® (product page: its description and its spec tab), the maker, read Oct 18, 2026 the page, harvested Oct 18, 2026
"Approximately", in the page's description and again in its spec tab ("Length Approximately 6.125\""): its ± is taken as the sheet's last digit's, 0.05.
Published “Length: 6.2"”
Wing Tactical, SB Tactical SBA5 Pistol Stabilizing Brace (MPN SBA5X-01-SB / SBA5X-02-SB; SPECIFICATIONS), a seller, read Oct 18, 2026 the page, harvested Oct 18, 2026
The maker's newest document (FEB 2026), which names what it measures (the brace alone); a seller's table repeats it. The page's "Approximately 6.125" is 1.2% under it, inside the page's own ±.
From the front of the housing round the tube to the cuff's rearmost face. The sheet's figure is for the brace alone ("Brace only"), apart from its collapsed and extended lengths; the page's is "Approximately 6.125". Wing Tactical's table repeats the sheet's. The maker's straight side photo, scaled by the sheet's length and Wing Tactical's height together, is the check (the trace's own scales).
Height5.16 in ± 0.04 in 131.1 mmConflictPhoto: SB Tactical: SBA5-left-web-1.jpg, straight left side on white, 1500 px
Published “Height: 5.4"”
Wing Tactical, SB Tactical SBA5 Pistol Stabilizing Brace (MPN SBA5X-01-SB / SBA5X-02-SB; SPECIFICATIONS), a seller, read Oct 18, 2026 the page, harvested Oct 18, 2026
A seller's own table, with its own weight (9.21 oz) and width (2.16 in): one seller, provisional.
Photo 5.16 in ± 0.04 in used
SB Tactical: SBA5-left-web-1.jpg, straight left side on white, 1500 px, harvested
Scale: the sheet's length, 6.2 in = 1210 px (195.2 px/in), the silhouette's ends. Read by the silhouette's height, 1007 px (luminance < 235): the strap's tab's top to the cuff's foot
The maker's FDE picture of the same view keeps the proportion to 0.1% (1128 x 938 px), and the brace pasted into the maker's two pistol pictures to 0.2% (360 x 299). ± for the silhouette's ends (2 px each) and the length's last digit.
Photo 5.18 in ± 0.06 in
SB Tactical: SBA5-rear-web-1.jpg, straight from behind on white, 1179 px, harvested
Scale: the maker's 2.1 in width (max) = the end cap's 415 px at its widest, the strap left out (197.6 px/in). Read by the silhouette's height, 1023 px (luminance < 235): the strap's tab's top to the flaps' foot
An independent check of the side photo's reading: another view, scaled by the other published size. ± for where the strap's edge leaves the cap's (5 px).
The maker's own pictures, scaled each by one of the maker's two published sizes (its length in the side view, its width in the view from behind), agree on it within 0.02 in. Wing Tactical's 5.4 is 4.5% over it and stays beside it: the seller's own photographs (Primary Arms' and the green one, taken from nearer and behind) make the cuff, the tallest part, read taller, which may be where it comes from.
wing and side-photo differ by 0.24 in beyond what each states it is good to.
wing and rear-photo differ by 0.22 in beyond what each states it is good to.
From the top of the strap's loop over the cuff to the cuff's lowest point. The maker states none (its page, its sheet and its shared instructions read 2026-10-18); Wing Tactical's table is the one figure on file.
Width (max)2.1 in 53.3 mmConflictPublished: SB Tactical, SBA5 Pistol Stabilizing Brace specification sheet (FEB 2026), the maker, read Oct 18, 2026
Published “Width (max): 2.1"” used
SB Tactical, SBA5 Pistol Stabilizing Brace specification sheet (FEB 2026), the maker, read Oct 18, 2026 the page, harvested Oct 18, 2026
Published “Max Width Approximately 2.1"”
SB Tactical, SBA5® AR Adjustable Pistol Stabilizing Brace® (product page: its description and its spec tab), the maker, read Oct 18, 2026 the page, harvested Oct 18, 2026
Published “Width: 2.16"”
Wing Tactical, SB Tactical SBA5 Pistol Stabilizing Brace (MPN SBA5X-01-SB / SBA5X-02-SB; SPECIFICATIONS), a seller, read Oct 18, 2026 the page, harvested Oct 18, 2026
The maker's figure, on its sheet and its page alike. Wing Tactical's 2.16 is the shop's own, 3% over it, kept beside it.
sheet and wing differ by 0.06 in beyond what each states it is good to.
page and wing differ by 0.06 in beyond what each states it is good to.
The widest place: the cuff, with the strap round it (the maker's view from the rear). What the page and the sheet measure across is not said.
Length, collapsed (the maker's figure; what it is measured between is not said)7.5 in ± 0.05 in 190.5 mmConfirmedPublished: SB Tactical, SBA5 Pistol Stabilizing Brace specification sheet (FEB 2026), the maker, read Oct 18, 2026
Published “7.5" Collapsed” used
SB Tactical, SBA5 Pistol Stabilizing Brace specification sheet (FEB 2026), the maker, read Oct 18, 2026 the page, harvested Oct 18, 2026
Published “5-position adjustable, 7.5" collapsed to 10.25" extended”
Primary Arms, SB Tactical SBA5 AR Pistol Brace (SKU: SBA5-BLK MPN: SBA5-BLK; Features), a seller, read Oct 18, 2026 the page, harvested Oct 18, 2026
The maker's figure; the seller repeats it.
With the brace alone 6.2 in on the same sheet, 7.5 in is measured to something ahead of the brace's own front, which the sheet doesn't name. Not used to seat it: its seat is read on the maker's picture of it on a pistol (butt_behind_pin_pos1).
Length, extended (the maker's figure, on the same basis as the collapsed one)10.25 in 260.3 mmConfirmedPublished: SB Tactical, SBA5 Pistol Stabilizing Brace specification sheet (FEB 2026), the maker, read Oct 18, 2026
Published “10.25" Extended” used
SB Tactical, SBA5 Pistol Stabilizing Brace specification sheet (FEB 2026), the maker, read Oct 18, 2026 the page, harvested Oct 18, 2026
Published “5-position adjustable, 7.5" collapsed to 10.25" extended”
Primary Arms, SB Tactical SBA5 AR Pistol Brace (SKU: SBA5-BLK MPN: SBA5-BLK; Features), a seller, read Oct 18, 2026 the page, harvested Oct 18, 2026
The maker's figure; the seller repeats it.
Four steps on from collapsed (five positions): 2.75 in, 0.69 in a step.
Strap width1 in ± 0.05 in 25.4 mmConfirmedPublished: SB Tactical, SBA5 Pistol Stabilizing Brace specification sheet (FEB 2026), the maker, read Oct 18, 2026
Published “Strap Width: 1"” used
SB Tactical, SBA5 Pistol Stabilizing Brace specification sheet (FEB 2026), the maker, read Oct 18, 2026 the page, harvested Oct 18, 2026
Written as a whole inch on a sheet whose other lengths go to a tenth: its ± is taken as theirs.
Cavity depth (how far the tube goes in, from the brace's front)6 in ± 0.05 in 152.4 mmConfirmedPublished: SB Tactical, SBA5 Pistol Stabilizing Brace specification sheet (FEB 2026), the maker, read Oct 18, 2026
Published “Cavity Depth: 6"” used
SB Tactical, SBA5 Pistol Stabilizing Brace specification sheet (FEB 2026), the maker, read Oct 18, 2026 the page, harvested Oct 18, 2026
Written as a whole inch on a sheet whose other lengths go to a tenth: its ± is taken as theirs.
Tube axis below the brace's top (the top of the strap's tab)0.957 in ± 0.062 in 24.3 mmProvisionalWorked out: {.tab_above_housing_top} + {.tube_axis_below_housing_top}
Worked out 0.957 in used
{.tab_above_housing_top} + {.tube_axis_below_housing_top}, harvested
The profiles' origin is the tab's top, the outline's highest point; the axis is read below the housing's own top, which the tab stands over.
The strap's tab, its top over the housing's top line0.297 in ± 0.015 in 7.5 mmProvisionalPhoto: SB Tactical: SBA5-left-web-1.jpg, straight left side on white, 1500 px
Photo 0.297 in ± 0.015 in used
SB Tactical: SBA5-left-web-1.jpg, straight left side on white, 1500 px, harvested
Scale: the sheet's length, 6.2 in = 1210 px (195.2 px/in). Read by rows 254 (the tab's top) and 312 (the housing's top, level from the mouth to the tab) on a 1.2x gridded crop
The view from behind reads the tab 62 px tall at 197.6 px/in, 0.31 in: it agrees.
The tube's axis below the housing's top line0.66 in ± 0.06 in 16.8 mmProvisionalWorked out: {std.receiver_extension.milspec_od} / 2 + {.bore_top_wall}
Worked out 0.66 in ± 0.06 in used
{std.receiver_extension.milspec_od} / 2 + {.bore_top_wall}, harvested
No view on file shows the mouth square. The bore is taken as the mil-spec tube's own diameter under the wall the oblique shows over it (bore_top_wall); the maker's ghost pistol picture puts the tube's top at the housing's top line (the brace is pasted in), which this allows within its ±.
The housing's wall over the bore, at the mouth0.086 in ± 0.05 in 2.2 mmProvisionalPhoto: Primary Arms: SBA5-BLK_03, the brace from the front, the left and above, 2200 px
Photo 0.086 in ± 0.05 in used
Primary Arms: SBA5-BLK_03, the brace from the front, the left and above, 2200 px, harvested
Scale: the mouth's own height in the same face (the bore over the indexing rail's channel: the mil-spec tube's top to its rail's foot, 1.448 in by std.receiver_extension), about 300 px. Read by the rim over the bore's top, 15 to 20 px on a 1.2x gridded crop, read as a share of the mouth's height in the one plane of the front face
± for where the rim's inner and outer edges are in an oblique with the face's top lit.
The lock pin (the lever's cross pin) ahead of the brace's rear3.907 in ± 0.04 in 99.2 mmProvisionalPhoto: SB Tactical: SBA5-left-web-1.jpg, straight left side on white, 1500 px
Photo 3.907 in ± 0.04 in used
SB Tactical: SBA5-left-web-1.jpg, straight left side on white, 1500 px, harvested
Scale: the sheet's length, 6.2 in = 1210 px (195.2 px/in). Read by the two pins' heads' centres, columns 567 and 568, against the cuff's rearmost column 1330, on a 1.2x gridded crop
The maker's instructions: "Grasp the adjustment lever at the cross pin for the SBA3, SBA5 and SBA6 ... and pull down until the pin clears the tube cavity". The lever's two pins stand one over the other at its rear end; the lock pin is taken to be under the upper one, the cross pin.
The lever's pins, the heads' diameter0.077 in ± 0.015 in 2 mmProvisionalPhoto: SB Tactical: SBA5-left-web-1.jpg, straight left side on white, 1500 px
Photo 0.077 in ± 0.015 in used
SB Tactical: SBA5-left-web-1.jpg, straight left side on white, 1500 px, harvested
Scale: the sheet's length, 6.2 in = 1210 px (195.2 px/in). Read by each head about 15 px across on a 1.2x gridded crop
The QD socket's bore0.37 in ± 0.03 in 9.4 mmProvisionalPhoto: SB Tactical: SBA5-left-web-1.jpg, straight left side on white, 1500 px
Photo 0.37 in ± 0.03 in used
SB Tactical: SBA5-left-web-1.jpg, straight left side on white, 1500 px, harvested
Scale: the sheet's length, 6.2 in = 1210 px (195.2 px/in). Read by the dark round in the socket's panel, about 72 px across, centred at column 887, row 617
The strap's thickness0.06 in ± 0.03 in 1.5 mmProvisionalWorked out: An assumption for the drawing, not a reading: no view on file shows the strap's edge square. The sheet says only that it is nylon, 1 in wide.
Worked out 0.06 in ± 0.03 in used
An assumption for the drawing, not a reading: no view on file shows the strap's edge square. The sheet says only that it is nylon, 1 in wide., harvested
The QD socket's panel and the blank panel, how deep each is recessed in the housing's side0.06 in ± 0.03 in 1.5 mmProvisionalWorked out: An assumption for the drawing, not a reading: both side views show each panel's rim as a step, and no view shows it in profile.
Worked out 0.06 in ± 0.03 in used
An assumption for the drawing, not a reading: both side views show each panel's rim as a step, and no view shows it in profile., harvested
The parting lines' depth and width (round the lever, the cap's seam with the flaps, the groove along the housing's front)0.03 in ± 0.015 in 0.8 mmProvisionalWorked out: An assumption for the drawing, not a reading: each line is a dark hairline in the side views, a few pixels across, and no view shows one in profile.
Worked out 0.03 in ± 0.015 in used
An assumption for the drawing, not a reading: each line is a dark hairline in the side views, a few pixels across, and no view shows one in profile., harvested
The cuff's flaps, how thick each wall is round the opening between them0.25 in ± 0.04 in 6.3 mmProvisionalPhoto: SB Tactical: SBA5-rear-web-1.jpg, straight from behind on white, 1179 px
Photo 0.25 in ± 0.04 in used
SB Tactical: SBA5-rear-web-1.jpg, straight from behind on white, 1179 px, harvested
Scale: the end cap's 415 px at its widest for the maker's 2.1 in (197.6 px/in). Read by the rim's width across, left and right, on rows 600 to 700 of a gridded crop: 55 and 46 px; and over the opening's top, under the cap's seam, about 55 px
From behind, the flaps' rear faces are a rim round the opening, and inside the rim their inner faces run forward in shadow to where the ground shows through. The opening is drawn at the rim's inner edge, the whole length of the cuff (its inner faces' lean forward isn't read).
The split between the cuff's two flaps, at their foot0.02 in ± 0.01 in 0.5 mmProvisionalWorked out: An assumption for the drawing, not a reading: the view from behind shows the split as a line about 4 px across at 198 px/in.
Worked out 0.02 in ± 0.01 in used
An assumption for the drawing, not a reading: the view from behind shows the split as a line about 4 px across at 198 px/in., harvested
Rear behind the takedown pin at its first position (all the way forward), on a mil-spec carbine receiver extension8.746 in ± 0.08 in 222.1 mmProvisionalWorked out: {bcm-receiver-extension.tube_front_behind_pin} + {bcm-receiver-extension.tube_length} - {bcm-receiver-extension.position_hole_rear_from_rear} - 4 * {bcm-receiver-extension.position_step} + {.lock_pin_ahead_of_butt}
Worked out 8.746 in ± 0.08 in used
{bcm-receiver-extension.tube_front_behind_pin} + {bcm-receiver-extension.tube_length} - {bcm-receiver-extension.position_hole_rear_from_rear} - 4 * {bcm-receiver-extension.position_step} + {.lock_pin_ahead_of_butt}, harvested
The lock pin in the tube's second hole. ± for the hole's place (0.03), the tube's seat (0.02), the pin's place in the brace (0.04) and the tube's length, a generic figure.
Worked out 8.625 in ± 0.06 in
{.length_collapsed} - {std.ar15.receiver_rear_x}, harvested
The sheet's collapsed length read as measured from the receiver's rear face: a reading of what the sheet doesn't say.
Photo 8.57 in ± 0.1 in
SB Tactical: SBA5-on-pistol-left-ghost-web-1.jpg, a ghosted AR pistol from its left with the brace pasted in, 1766 px, harvested
Scale: pin frame: takedown (1210.4, 840.6), pivot (846.9, 843.9) = 6.375 in apart (57.0 px/in), the heads' centres on 8x crops. Read by the brace's rearmost dark column, 1699, behind the takedown pin's head
The brace is pasted in at 58.1 px/in by its own length (1.8% off the pins' scale), and the maker's colour picture of the same pistol has it pasted 0.3 in further forward, against the castle nut: an artist's placement.
A seat is where two parts touch: the lock pin in the tube's hole, the first one the cavity's depth lets it reach. The sheet's lengths, read from the receiver's rear face, agree within 0.12 in and put its last position at the tube's rear hole within 0.01; the pasted pictures are kept beside it.
Five positions on a tube of six holes: its first is the tube's SECOND hole from the front. At the front hole, with its lock pin 3.91 in ahead of its rear and its cavity 6 in deep, the tube's rear end (7.92 in behind the pin) would stand at the cavity's floor (1.90 + 6.0 = 7.90): the brace doesn't go that far forward. At the second hole its rear stands 7.62 in behind the receiver's rear face, and at the sixth 10.26: the sheet's "7.5" Collapsed 10.25" Extended", if they are measured from the receiver's rear face, which the sheet doesn't say (its 0.69 in a step against the tube's 0.66). Its front then stands 0.90 in behind the castle nut. The maker's pictures of it on a pistol are its side picture pasted in, once with 0.6 in of tube showing and once against the castle nut: kept as a reading, not a seat.
What it goes with
By the way it mounts, and the figures each part on file states: a part whose figures say it doesn't fit is left out, and one whose fit can't be checked from what is published is marked. A check is against published figures, not a guarantee.
Receiver extension (buffer tube)
Prices on file
Each seller's latest reading of its own page: before tax and shipping, and not a quote. The pages are read again every night.
- AR15Discounts $65.95 Black Nov 21, 2026, stock not said
- GRITR Sports $67.99 Black Nov 21, 2026, in stock that day
- Primary Arms $69.99 Black Nov 21, 2026, in stock that day
- KYGUNCO $99.99 Black Nov 21, 2026, in stock that day
- Wing Tactical $99.99 Nov 21, 2026, in stock that day
- AR15Discounts $99.99 FDE Nov 21, 2026, stock not said
- AR15Discounts $99.99 OD Green Nov 21, 2026, stock not said