Brace
SB Tactical SBA3® AR Adjustable Pistol Stabilizing Brace®
SB Tactical's slim five-position brace for an AR pistol: a polymer housing round a mil-spec carbine tube with a lever that draws its lock pin, a block under it with an ambidextrous QD socket, an end cap behind, and under the cap a cuff of two fins round a window, with a one-inch nylon strap through a loop on top and round the cuff. 6.75 oz by the maker's page. Its shape is read from the maker's straight left and rear views, and its size and place from the maker's two pictures of it on a pistol, framed by the lower's pins; no drawing or design patent of it is on file.

- Weight
- 6.75 oz Conflictpublished: SB Tactical, SBA3 product page (the description), the maker, read Oct 18, 2026Its sources span 6.75 oz to 7.25 oz.
- Lowest price
- $69.99 at Primary Arms, read Nov 21, 2026 (Black)
- Maker's number
- SBA3X-01-SB
- Colours
- Black, FDE, OD Green
- Drawn as
- modelled
- Maker's page
- sb-tactical.com
In “BCM 11.5 in pistol, SBA3 brace”, a build on the start page, as it is.
Its figures
Every figure the site draws and checks it by, with where it came from. Open one for each source's reading, and why one is used where they differ.
Overall length (the brace alone, its housing's front face to its end cap's rear face)6.38 in ± 0.06 in 162.1 mmCorroboratedPhoto: SB Tactical: SBA_3_Black_Left_Extended_web.jpg, an Aero M4E1 pistol with the brace at full extension, its true left side, in colour, 2500 x 2500
Photo 6.38 in ± 0.06 in used
SB Tactical: SBA_3_Black_Left_Extended_web.jpg, an Aero M4E1 pistol with the brace at full extension, its true left side, in colour, 2500 x 2500, harvested
Scale: the lower's two pins, std.ar15 spacing 6.375 in: the pivot pin's head centred at (1062.5, 1138), the takedown pin's at (1561.5, 1139.5), on 6x and 8x gridded crops: 499 px, 78.27 px/in; level to 0.2 degrees. Read by the housing's front face at column 1901.5 (row 1030, above the tube's top edge) and the end cap's rear face at 2401 (rows 1050 to 1090), luminance under 120: 499.5 px. ± for the pins' centres (1.5 px each), the two faces (1.5 px each) and the brace's near side standing about 0.45 in nearer the lens than the pins' heads
Photo 6.27 in ± 0.06 in
SB Tactical: SBA_3_Black_Left_ghost_web.jpg, the same pistol with the brace collapsed, the rifle ghosted grey and the brace in colour, its true left side, 2500 x 2500, harvested
Scale: the lower's two pins, std.ar15 spacing 6.375 in: the pivot pin's head centred at (1144, 1187), the takedown pin's at (1711.5, 1188), on 8x gridded crops: 567.5 px, 89.02 px/in. Read by the brace's dark pixels (luminance under 90, which leaves the ghosted rifle out): the housing's front face at column 1870 (rows 1100 to 1120), the end cap's rear face at 2428: 558 px. ± as the extended picture's; the ghosting makes the pins' rims fainter
The extended picture is a photograph in colour whose pin frame lands two other standard figures (the receiver's rear face and the tube's width); the ghosted one's pins are faint. The two agree within their ±; the collapsed one is kept beside it.
No page gives the brace's own length (the published 6.75 in is length_collapsed: what it adds behind the end plate). Read on the maker's two pictures of it on an Aero M4E1 pistol, each framed by the lower's two pins. The two readings are 0.11 in apart, 1.7%: within their ± together. The extended picture's frame checks on two standard figures it wasn't set by (the receiver's rear face 1.13 in behind the pin for the drawing's 1.125; the exposed tube's silhouette 1.13 in across for 1.148, a black tube reading 2% thin as it does), the ghosted one's on the rear face only (1.11).
Height (the strap loop's top to the strap's foot under the cuff)5.76 in ± 0.06 in 146.3 mmCorroboratedPhoto: SB Tactical: SBA_3_Black_Left_Extended_web.jpg, an Aero M4E1 pistol with the brace at full extension, its true left side, in colour, 2500 x 2500
Photo 5.76 in ± 0.06 in used
SB Tactical: SBA_3_Black_Left_Extended_web.jpg, an Aero M4E1 pistol with the brace at full extension, its true left side, in colour, 2500 x 2500, harvested
Scale: the lower's two pins, std.ar15 spacing 6.375 in: the pivot pin's head centred at (1062.5, 1138), the takedown pin's at (1561.5, 1139.5), on 6x and 8x gridded crops: 499 px, 78.27 px/in; level to 0.2 degrees. Read by the housing's front face at column 1901.5 (row 1030, above the tube's top edge) and the end cap's rear face at 2401 (rows 1050 to 1090), luminance under 120: 499.5 px. ± for the pins' centres (1.5 px each), the two faces (1.5 px each) and the brace's near side standing about 0.45 in nearer the lens than the pins' heads
The loop's top at row 995.5 (columns 2300 to 2380), the strap's foot at 1446 (columns 2280 to 2360): 450.5 px.
Photo 5.71 in ± 0.06 in
SB Tactical: SBA_3_Black_Left_ghost_web.jpg, the same pistol with the brace collapsed, the rifle ghosted grey and the brace in colour, its true left side, 2500 x 2500, harvested
Scale: the lower's two pins, std.ar15 spacing 6.375 in: the pivot pin's head centred at (1144, 1187), the takedown pin's at (1711.5, 1188), on 8x gridded crops: 567.5 px, 89.02 px/in. Read by the brace's dark pixels (luminance under 90, which leaves the ghosted rifle out): the housing's front face at column 1870 (rows 1100 to 1120), the end cap's rear face at 2428: 558 px. ± as the extended picture's; the ghosting makes the pins' rims fainter
The loop's top at row 1025.5, the strap's foot at 1533.5: 508 px.
As the length: the frame that lands two standard figures. The collapsed picture agrees within the ±.
No page states one. Read on the same two pictures as the length, in the same frames. The silhouette's top is the top of the loop the strap runs through; its foot is the strap where it wraps under the cuff.
Width (max)1.8 in 45.7 mmConfirmedPublished: SB Tactical, SBA3 Pistol Stabilizing Brace specification sheet (REV DEC 2021; the product page's 'SBA3 Specification Sheet'), the maker, read Oct 18, 2026
Published “Width (max): 1.8"” used
SB Tactical, SBA3 Pistol Stabilizing Brace specification sheet (REV DEC 2021; the product page's 'SBA3 Specification Sheet'), the maker, read Oct 18, 2026 the page, harvested Oct 18, 2026
Published “Width: Approximately 2″”
SB Tactical, SBA3 product page (the description), the maker, read Oct 18, 2026 the page, harvested Oct 18, 2026
Published “Max Width Approximately 2"”
SB Tactical, SBA3 product page (the Specifications tab), the maker, read Oct 18, 2026 the page, harvested Oct 18, 2026
Published “Width: 1.8"”
Primary Arms, SB Tactical SBA3 AR Pistol Brace (SKU: SBA3X-01-SB), a seller, read Oct 18, 2026 the page, harvested Oct 18, 2026
Published “Width(max) 1.8"”
Midwest Gun Works, SB Tactical AR-15 SBA3 Brace (SBA3-XX), a seller, read Oct 18, 2026 the page, harvested Oct 18, 2026
Photo 1.84 in ± 0.06 in
SB Tactical: SBA3-rear-product_image.jpg, the brace straight from the rear, 2000 x 1500, harvested
Scale: the height (5.76 in) over the silhouette's 1065 rows (212 to 1277): 184.9 px/in. Read by the end cap's block across at row 420, inside the strap each side (columns 832 to 1172), on a 1.8x gridded crop
The maker's sheet names it the maximum; two sellers repeat it and the rear view reads the body 1.84 across, inside the ±. The page's 2 is 'approximately' and is the body with its strap round it.
The maker gives two: its sheet's "Width (max): 1.8"" (which two sellers repeat) and its page's "Approximately 2″". The maker's straight view from the rear, scaled by the height, has the end cap's block 1.84 in across (340 px at 184.9 px/in, row 420) and the strap round it 2.0 in: the sheet's figure is the body's, the page's the body with its strap.
Tube axis below the brace's top (the strap loop's top)0.95 in ± 0.04 in 24.1 mmCorroboratedPhoto: SB Tactical: SBA_3_Black_Left_Extended_web.jpg, an Aero M4E1 pistol with the brace at full extension, its true left side, in colour, 2500 x 2500
Photo 0.95 in ± 0.04 in used
SB Tactical: SBA_3_Black_Left_Extended_web.jpg, an Aero M4E1 pistol with the brace at full extension, its true left side, in colour, 2500 x 2500, harvested
Scale: the lower's two pins, std.ar15 spacing 6.375 in: the pivot pin's head centred at (1062.5, 1138), the takedown pin's at (1561.5, 1139.5), on 6x and 8x gridded crops: 499 px, 78.27 px/in; level to 0.2 degrees. Read by the housing's front face at column 1901.5 (row 1030, above the tube's top edge) and the end cap's rear face at 2401 (rows 1050 to 1090), luminance under 120: 499.5 px. ± for the pins' centres (1.5 px each), the two faces (1.5 px each) and the brace's near side standing about 0.45 in nearer the lens than the pins' heads
The axis at row 1070.1 (the pins' row 1138.75 less 0.8775 in), the loop's top at 995.5: 74.6 px.
Photo 0.94 in ± 0.04 in
SB Tactical: SBA_3_Black_Left_ghost_web.jpg, the same pistol with the brace collapsed, the rifle ghosted grey and the brace in colour, its true left side, 2500 x 2500, harvested
Scale: the lower's two pins, std.ar15 spacing 6.375 in: the pivot pin's head centred at (1144, 1187), the takedown pin's at (1711.5, 1188), on 8x gridded crops: 567.5 px, 89.02 px/in. Read by the brace's dark pixels (luminance under 90, which leaves the ghosted rifle out): the housing's front face at column 1870 (rows 1100 to 1120), the end cap's rear face at 2428: 558 px. ± as the extended picture's; the ghosting makes the pins' rims fainter
The axis at row 1109.4 (the pins' row 1187.5 less 0.8775 in), the loop's top at 1025.5: 83.9 px.
As the length; the two agree within a hundredth.
Where the tube is in the two pictures on a rifle: the bore's axis, std.ar15.bore_axis_y above the pins' line, which the exposed tube bears out in the extended one (its top edge 0.56 in above that axis, the tube's radius less 2%).
Rear behind the takedown pin at its first position (all the way forward), on a mil-spec carbine tube8.09 in ± 0.07 in 205.5 mmProvisionalWorked out: {.butt_behind_pin_extended} - 4 * {bcm-receiver-extension.position_step}
Worked out 8.09 in ± 0.07 in used
{.butt_behind_pin_extended} - 4 * {bcm-receiver-extension.position_step}, harvested
The extended picture's reading, four of the tube's steps forward: ± the reading's and the step's (a generic figure).
Photo 8.05 in ± 0.06 in
SB Tactical: SBA_3_Black_Left_ghost_web.jpg, the same pistol with the brace collapsed, the rifle ghosted grey and the brace in colour, its true left side, 2500 x 2500, harvested
Scale: the lower's two pins, std.ar15 spacing 6.375 in: the pivot pin's head centred at (1144, 1187), the takedown pin's at (1711.5, 1188), on 8x gridded crops: 567.5 px, 89.02 px/in. Read by the brace's dark pixels (luminance under 90, which leaves the ghosted rifle out): the housing's front face at column 1870 (rows 1100 to 1120), the end cap's rear face at 2428: 558 px. ± as the extended picture's; the ghosting makes the pins' rims fainter
The end cap's rear face at column 2428, the takedown pin's centre at 1711.5: 716.5 px.
Worked out 8.005 in ± 0.04 in
-{std.ar15.receiver_rear_x} + {bcm-end-plate.thickness} + {.length_collapsed}, harvested
The published collapsed length read as from the end plate's rear face: a reading of what the maker's figure spans.
The extended picture's frame is the one that lands two standard figures (the receiver's rear face and the tube's width), as for the length. The collapsed picture's direct reading is 0.04 in further forward and would put the brace's front 0.03 in into the castle nut's drawing-set rear face (bcm-castle-nut.rear_face_behind_pin), as the MOE Carbine's own photo did: kept beside it, inside its ±. The derived figure rests on a reading of what the published length spans.
Read on the maker's two pictures of it on a pistol, framed by the lower's pins: extended (the fifth position) its rear is 10.73 in behind the pin, which is 8.09 at the first, four of the tube's steps forward (the maker: "5-position adjustable"); collapsed, the ghosted picture reads 8.05 directly. A third figure: the published 6.75 in, taken as measured from the end plate's rear face (the receiver's rear face, std.ar15.receiver_rear_x, and a mil-spec plate's thickness), gives 8.005. The two pictures' rears are 2.68 in apart: the tube's four steps (2.64) and the published 9.5 less 6.75 (2.75) either side.
Rear behind the takedown pin at full extension, on a mil-spec carbine tube10.73 in ± 0.06 in 272.5 mmProvisionalPhoto: SB Tactical: SBA_3_Black_Left_Extended_web.jpg, an Aero M4E1 pistol with the brace at full extension, its true left side, in colour, 2500 x 2500
Photo 10.73 in ± 0.06 in used
SB Tactical: SBA_3_Black_Left_Extended_web.jpg, an Aero M4E1 pistol with the brace at full extension, its true left side, in colour, 2500 x 2500, harvested
Scale: the lower's two pins, std.ar15 spacing 6.375 in: the pivot pin's head centred at (1062.5, 1138), the takedown pin's at (1561.5, 1139.5), on 6x and 8x gridded crops: 499 px, 78.27 px/in; level to 0.2 degrees. Read by the housing's front face at column 1901.5 (row 1030, above the tube's top edge) and the end cap's rear face at 2401 (rows 1050 to 1090), luminance under 120: 499.5 px. ± for the pins' centres (1.5 px each), the two faces (1.5 px each) and the brace's near side standing about 0.45 in nearer the lens than the pins' heads
The end cap's rear face at column 2401, the takedown pin's centre at 1561.5: 839.5 px.
Length, collapsed (the maker's figure; as read, from the end plate's rear face to the brace's rear)6.75 in 171.4 mmConfirmedPublished: SB Tactical, SBA3 Pistol Stabilizing Brace specification sheet (REV DEC 2021; the product page's 'SBA3 Specification Sheet'), the maker, read Oct 18, 2026
Published “Length: 6.75" Collapsed” used
SB Tactical, SBA3 Pistol Stabilizing Brace specification sheet (REV DEC 2021; the product page's 'SBA3 Specification Sheet'), the maker, read Oct 18, 2026 the page, harvested Oct 18, 2026
Published “Length: Approximately 6.75″”
SB Tactical, SBA3 product page (the description), the maker, read Oct 18, 2026 the page, harvested Oct 18, 2026
Published “Length: 6.75" – 9.5"”
Primary Arms, SB Tactical SBA3 AR Pistol Brace (SKU: SBA3X-01-SB), a seller, read Oct 18, 2026 the page, harvested Oct 18, 2026
Published “Length - 6.75", 7.5", 8.25", 9.0", 9.5"”
Midwest Gun Works, SB Tactical AR-15 SBA3 Brace (SBA3-XX), a seller, read Oct 18, 2026 the page, harvested Oct 18, 2026
The first of the five positions' lengths.
The maker's sheet, which names it collapsed; its page and two sellers repeat it.
The page calls it the length; the sheet says "6.75" Collapsed". The brace alone is 6.38 in (length): this figure is what it adds behind the end plate at its first position (butt_behind_pin_pos1 less the receiver's rear face and the plate: 6.79 in the collapsed picture).
Length, extended (the maker's figure, as length_collapsed)9.5 in ± 0.05 in 241.3 mmConfirmedPublished: SB Tactical, SBA3 Pistol Stabilizing Brace specification sheet (REV DEC 2021; the product page's 'SBA3 Specification Sheet'), the maker, read Oct 18, 2026
Published “9.5" Extended” used
SB Tactical, SBA3 Pistol Stabilizing Brace specification sheet (REV DEC 2021; the product page's 'SBA3 Specification Sheet'), the maker, read Oct 18, 2026 the page, harvested Oct 18, 2026
Published “Length: 6.75" – 9.5"”
Primary Arms, SB Tactical SBA3 AR Pistol Brace (SKU: SBA3X-01-SB), a seller, read Oct 18, 2026 the page, harvested Oct 18, 2026
Published “Length - 6.75", 7.5", 8.25", 9.0", 9.5"”
Midwest Gun Works, SB Tactical AR-15 SBA3 Brace (SBA3-XX), a seller, read Oct 18, 2026 the page, harvested Oct 18, 2026
The last of the five positions' lengths.
The maker's sheet; two sellers repeat it.
Cavity depth (how deep the tube's bore runs into the brace from its front)6.219 in ± 0.1 in 158 mmProvisionalWorked out: {bcm-receiver-extension.tube_front_behind_pin} + {bcm-receiver-extension.tube_length} - {.butt_behind_pin_pos1} + {.length} + {.bore_clearance}
Published “Cavity Depth: 6"”
SB Tactical, SBA3 Pistol Stabilizing Brace specification sheet (REV DEC 2021; the product page's 'SBA3 Specification Sheet'), the maker, read Oct 18, 2026 the page, harvested Oct 18, 2026
Worked out 6.219 in ± 0.1 in used
{bcm-receiver-extension.tube_front_behind_pin} + {bcm-receiver-extension.tube_length} - {.butt_behind_pin_pos1} + {.length} + {.bore_clearance}, harvested
As deep as the tube's rear end reaches at the collapsed seat, with the bore's clearance: what the collapsed picture requires of a 7.25 in tube.
The sheet's figure is stated to the inch; the depth the brace's own seat on a carbine tube requires is inside it, and keeps the tube out of the end cap's wall.
The sheet's "Cavity Depth", read as the bore the tube slides in (the instructions' "pull down until the pin clears the tube cavity"). Stated to the inch. A carbine tube (bcm-receiver-extension: screwed in to 0.669 in behind the pin, 7.25 in long, a generic figure) ends 7.92 in behind the pin, and at the collapsed seat the brace's front stands 1.71 in behind it: the bore has to run 6.22 in to take the tube there, inside the sheet's stated precision. The model's bore is that.
Strap width1 in ± 0.05 in 25.4 mmConfirmedPublished: SB Tactical, SBA3 Pistol Stabilizing Brace specification sheet (REV DEC 2021; the product page's 'SBA3 Specification Sheet'), the maker, read Oct 18, 2026
Published “Strap Width: 1"” used
SB Tactical, SBA3 Pistol Stabilizing Brace specification sheet (REV DEC 2021; the product page's 'SBA3 Specification Sheet'), the maker, read Oct 18, 2026 the page, harvested Oct 18, 2026
The webbing's width, to the tenth (the side view reads 1.07 across the strap's band, its fuzz included).
Published “Strap width: 1"”
Primary Arms, SB Tactical SBA3 AR Pistol Brace (SKU: SBA3X-01-SB), a seller, read Oct 18, 2026 the page, harvested Oct 18, 2026
The maker's sheet; a seller repeats it.
Strap thickness (the nylon webbing with its hook and loop)0.12 in ± 0.04 in 3 mmProvisionalPhoto: SB Tactical: SBA3-rear-product_image.jpg, the brace straight from the rear, 2000 x 1500
Photo 0.12 in ± 0.04 in used
SB Tactical: SBA3-rear-product_image.jpg, the brace straight from the rear, 2000 x 1500, harvested
Scale: the height (5.76 in) over the silhouette's 1065 rows (212 to 1277): 184.9 px/in. Read by the end cap's block across at row 420, inside the strap each side (columns 832 to 1172), on a 1.8x gridded crop
The band the strap makes beside the end cap's block on its left, 28 px (columns 804 to 832, row 450): 0.15 in with the loop side's fuzz, which the ± takes in.
The cuff's width over its strap, below the end cap's block1.56 in ± 0.05 in 39.6 mmProvisionalPhoto: SB Tactical: SBA3-rear-product_image.jpg, the brace straight from the rear, 2000 x 1500
Photo 1.56 in ± 0.05 in used
SB Tactical: SBA3-rear-product_image.jpg, the brace straight from the rear, 2000 x 1500, harvested
Scale: the height (5.76 in) over the silhouette's 1065 rows (212 to 1277): 184.9 px/in. Read by the end cap's block across at row 420, inside the strap each side (columns 832 to 1172), on a 1.8x gridded crop
280 px at row 950 (columns 864 to 1144) to 296 px lower down, where the strap lies looser round the fins: 1.51 to 1.60 in, the strap round each fin included.
The cuff's window across (the channel the forearm goes in)1.05 in ± 0.05 in 26.7 mmProvisionalPhoto: SB Tactical: SBA3-rear-product_image.jpg, the brace straight from the rear, 2000 x 1500
Photo 1.05 in ± 0.05 in used
SB Tactical: SBA3-rear-product_image.jpg, the brace straight from the rear, 2000 x 1500, harvested
Scale: the height (5.76 in) over the silhouette's 1065 rows (212 to 1277): 184.9 px/in. Read by the end cap's block across at row 420, inside the strap each side (columns 832 to 1172), on a 1.8x gridded crop
The white through it at its widest, 188 px at row 1050 (columns 913 to 1101) to 201 px: 1.02 to 1.09 in. Between rows 850 and 1000 a pad on each fin's inner face narrows it to 0.83 in (columns 929 to 1083 at row 950).
QD socket's bore0.4 in ± 0.02 in 10.2 mmProvisionalPhoto: SB Tactical: SBA3-black-product_image.jpg, the brace alone, its true left side, 2000 x 1500
Photo 0.4 in ± 0.02 in used
SB Tactical: SBA3-black-product_image.jpg, the brace alone, its true left side, 2000 x 1500, harvested
Scale: the length and the height (6.38 and 5.76 in) over the silhouette's 1140 and 1041 px: 178.7 and 180.7 px/in, 1.1% apart. Read by the white disc seen through the socket, 72 px across on a 1.4x gridded crop
QD socket's steel cup, across its rim0.55 in ± 0.03 in 14 mmProvisionalPhoto: SB Tactical: SBA3-black-product_image.jpg, the brace alone, its true left side, 2000 x 1500
Photo 0.55 in ± 0.03 in used
SB Tactical: SBA3-black-product_image.jpg, the brace alone, its true left side, 2000 x 1500, harvested
Scale: the length and the height (6.38 and 5.76 in) over the silhouette's 1140 and 1041 px: 178.7 and 180.7 px/in, 1.1% apart. Read by the white disc seen through the socket, 72 px across on a 1.4x gridded crop
The bright ring round the bore, 98 px across.
The steel pins' heads (the lever's cross pin and the block's pin)0.1 in ± 0.02 in 2.5 mmProvisionalPhoto: SB Tactical: SBA3-black-product_image.jpg, the brace alone, its true left side, 2000 x 1500
Photo 0.1 in ± 0.02 in used
SB Tactical: SBA3-black-product_image.jpg, the brace alone, its true left side, 2000 x 1500, harvested
Scale: the length and the height (6.38 and 5.76 in) over the silhouette's 1140 and 1041 px: 178.7 and 180.7 px/in, 1.1% apart. Read by the white disc seen through the socket, 72 px across on a 1.4x gridded crop
The bright heads at (951, 567) and (951, 712), 18 px across.
How far the housing's lower part stands in from its sides under the ledge0.12 in ± 0.06 in 3 mmProvisionalWorked out: An assumption for the drawing, not a reading: no view on file shows the housing's lower part square from the front or from below; the oblique from behind and the left shows a lit ledge along the housing's side over it.
Worked out 0.12 in ± 0.06 in used
An assumption for the drawing, not a reading: no view on file shows the housing's lower part square from the front or from below; the oblique from behind and the left shows a lit ledge along the housing's side over it., harvested
The adjustment lever's plate, thickness each side0.08 in ± 0.03 in 2 mmProvisionalWorked out: An assumption for the drawing, not a reading: no view on file shows the lever's plate edge-on.
Worked out 0.08 in ± 0.03 in used
An assumption for the drawing, not a reading: no view on file shows the lever's plate edge-on., harvested
Depth of the two notches under the housing's ledge and of the groove along its lower part0.03 in ± 0.015 in 0.8 mmProvisionalWorked out: An assumption for the drawing, not a reading: no view on file shows them in profile.
Worked out 0.03 in ± 0.015 in used
An assumption for the drawing, not a reading: no view on file shows them in profile., harvested
How far the end cap's plate stands in from the block it is on, all round0.08 in ± 0.02 in 2 mmCorroboratedPhoto: SB Tactical: SBA3-rear-product_image.jpg, the brace straight from the rear, 2000 x 1500
Photo 0.08 in ± 0.02 in used
SB Tactical: SBA3-rear-product_image.jpg, the brace straight from the rear, 2000 x 1500, harvested
Scale: the height (5.76 in) over the silhouette's 1065 rows (212 to 1277): 184.9 px/in. Read by the end cap's block across at row 420, inside the strap each side (columns 832 to 1172), on a 1.8x gridded crop
The hexagon's outer edge at column 836 and the plate's at 850 on its left side, row 420 (1.8x gridded crop): 14 px.
Photo 0.07 in ± 0.02 in
SB Tactical: SBA3-black-product_image.jpg, the brace alone, its true left side, 2000 x 1500, harvested
Scale: the length and the height (6.38 and 5.76 in) over the silhouette's 1140 and 1041 px: 178.7 and 180.7 px/in, 1.1% apart. Read by the white disc seen through the socket, 72 px across on a 1.4x gridded crop
The block's top at row 272 and the plate's at 285, columns 1510 to 1550: 13 px. Its foot is the seam's, within 3 px.
The rear view shows the sides the model sets in; the side view's top, which the outline already draws, agrees within a hundredth.
The plate on the end cap's block's rear (its rear face the brace's rearmost), seen from the side as a step under the block's top and from the rear as a second outline inside the hexagon.
Depth of the QD block's two recessed panels, each side0.1 in ± 0.05 in 2.5 mmProvisionalWorked out: An assumption for the drawing, not a reading: the panels show dark in every side view and in none in profile.
Worked out 0.1 in ± 0.05 in used
An assumption for the drawing, not a reading: the panels show dark in every side view and in none in profile., harvested
The bore's clearance round a mil-spec tube, each side0.01 in ± 0.01 in 0.3 mmProvisionalWorked out: An assumption for the drawing, not a reading: the bore is the tube's own section (std.receiver_extension) this much larger; the maker says only that fit 'may feel tighter or looser depending on the specific buffer tube used'.
Worked out 0.01 in ± 0.01 in used
An assumption for the drawing, not a reading: the bore is the tube's own section (std.receiver_extension) this much larger; the maker says only that fit 'may feel tighter or looser depending on the specific buffer tube used'., harvested
What it goes with
By the way it mounts, and the figures each part on file states: a part whose figures say it doesn't fit is left out, and one whose fit can't be checked from what is published is marked. A check is against published figures, not a guarantee.
Receiver extension (buffer tube)
Prices on file
Each seller's latest reading of its own page: before tax and shipping, and not a quote. The pages are read again every night.
- Primary Arms $69.99 Black Nov 21, 2026, in stock that day
- Midwest Gun Works $99.99 Black Nov 21, 2026, in stock that day
- Midwest Gun Works $99.99 FDE Nov 21, 2026, in stock that day